xref: /external/cros/system_api/dbus/cryptohome/rpc.proto

// Copyright (c) 2014 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
//
// The messages in this file comprise the DBus/Proto interface for
// Cryptohome where there is an AccountIdentifer argument, an
// AuthorizationRequest (if needed for the call), and the call's
// parameters as <Call>Request.
//
// 'optional' annotations are used heavily in the RPC definition
// because the RPC endpoints most properly sanity check the contents
// for application-specific logic, and the more optional-with-default
// parameters exist, the less data is actually transferred on the wire
// in "default" situations.

syntax = "proto2";

option optimize_for = LITE_RUNTIME;

package cryptohome;

import "key.proto";

// Error codes do not need to be sequential per-call.
// Prefixes by Request/Reply type should be used to help
// callers know if specialized errors apply.
enum CryptohomeErrorCode {
  // 0 is the default value of BaseReply::error. It
  // should never be used.
  CRYPTOHOME_ERROR_NOT_SET = 0;

  CRYPTOHOME_ERROR_ACCOUNT_NOT_FOUND = 1;
  CRYPTOHOME_ERROR_AUTHORIZATION_KEY_NOT_FOUND = 2;
  CRYPTOHOME_ERROR_AUTHORIZATION_KEY_FAILED = 3;
  CRYPTOHOME_ERROR_NOT_IMPLEMENTED = 4;
  CRYPTOHOME_ERROR_MOUNT_FATAL = 5;
  CRYPTOHOME_ERROR_MOUNT_MOUNT_POINT_BUSY = 6;
  CRYPTOHOME_ERROR_TPM_COMM_ERROR = 7;
  CRYPTOHOME_ERROR_TPM_DEFEND_LOCK = 8;
  CRYPTOHOME_ERROR_TPM_NEEDS_REBOOT = 9;
  CRYPTOHOME_ERROR_AUTHORIZATION_KEY_DENIED = 10;
  CRYPTOHOME_ERROR_KEY_QUOTA_EXCEEDED = 11;
  CRYPTOHOME_ERROR_KEY_LABEL_EXISTS = 12;
  CRYPTOHOME_ERROR_BACKING_STORE_FAILURE = 13;
  CRYPTOHOME_ERROR_UPDATE_SIGNATURE_INVALID = 14;
  CRYPTOHOME_ERROR_KEY_NOT_FOUND = 15;
  CRYPTOHOME_ERROR_LOCKBOX_SIGNATURE_INVALID = 16;
  CRYPTOHOME_ERROR_LOCKBOX_CANNOT_SIGN = 17;
  CRYPTOHOME_ERROR_BOOT_ATTRIBUTE_NOT_FOUND = 18;
  CRYPTOHOME_ERROR_BOOT_ATTRIBUTES_CANNOT_SIGN = 19;
  CRYPTOHOME_ERROR_TPM_EK_NOT_AVAILABLE = 20;
  CRYPTOHOME_ERROR_ATTESTATION_NOT_READY = 21;
  CRYPTOHOME_ERROR_CANNOT_CONNECT_TO_CA = 22;
  CRYPTOHOME_ERROR_CA_REFUSED_ENROLLMENT = 23;
  CRYPTOHOME_ERROR_CA_REFUSED_CERTIFICATE = 24;
  CRYPTOHOME_ERROR_INTERNAL_ATTESTATION_ERROR = 25;
  CRYPTOHOME_ERROR_FIRMWARE_MANAGEMENT_PARAMETERS_INVALID = 26;
  CRYPTOHOME_ERROR_FIRMWARE_MANAGEMENT_PARAMETERS_CANNOT_STORE = 27;
  CRYPTOHOME_ERROR_FIRMWARE_MANAGEMENT_PARAMETERS_CANNOT_REMOVE = 28;
  CRYPTOHOME_ERROR_MOUNT_OLD_ENCRYPTION = 29;
  CRYPTOHOME_ERROR_MOUNT_PREVIOUS_MIGRATION_INCOMPLETE = 30;
  CRYPTOHOME_ERROR_MIGRATE_KEY_FAILED = 31;
  CRYPTOHOME_ERROR_REMOVE_FAILED = 32;
}

message AccountIdentifier {
  // |email| is deprecated. Don't use it.
  optional string email = 1;

  optional string account_id = 2;
}

// Parameters for connecting and making requests to a key delegate service.
// This is currently used for making challenge requests for keys of the
// |KEY_TYPE_CHALLENGE_RESPONSE| type.
message KeyDelegate {
  // D-Bus service name of the key delegate service that exports the key
  // delegate object.
  optional string dbus_service_name = 1;
  // D-Bus object path of the key delegate object that implements the
  // org.chromium.CryptohomeKeyDelegateInterface interface.
  optional string dbus_object_path = 2;
}

message AuthorizationRequest {
  // |key| must supply at least a |key.secret()|.  If no |key.data()| or
  // |key.data().label()| is supplied, the |key.secret()| will be tested
  // against all compatible |key.data().type()| keys, where
  // KEY_TYPE_PASSWORD is the default type.  If
  // |key.data().label()| is supplied, then the |key.secret()| will only be
  // tested against the matching VaultKeyset.
  optional Key key = 1;
  // Describes delegate service that should be used for operations with the
  // |key| key.
  // Should be set only for keys with the |KEY_TYPE_CHALLENGE_RESPONSE| type.
  optional KeyDelegate key_delegate = 2;
}

// These parameters are for inbound data to Cryptohome RPC
// interfaces.  When calls are added that return data, a
// <Call>Response should be defined.
message MountRequest {
  // Perform an ephemeral mount only.
  optional bool require_ephemeral = 1 [default=false];
  // If defined, the account will be created if it does not exist.
  // Additionally, a failed AuthorizationRequest will be expected as
  // there will be no existing keys.
  optional CreateRequest create = 2;
  // If set to true, and cryptohomed supports the new "dircrypto" encryption,
  // forces to use the new encryption. That is, makes it an error to mount
  // an existing home directory encrypted in the old way (ecryptfs).
  optional bool force_dircrypto_if_available = 3;
  // If set to true, mounts the existing ecryptfs vault to a temporary location
  // while setting up a new dircrypto directory.
  optional bool to_migrate_from_ecryptfs = 4;
  // Performs a public mount, which is used for a Kiosk session. Credentials are
  // not needed in the request; they are synthesized by cryptohomed from id.
  optional bool public_mount = 5;
  // If set to true, mounts the vault to a temporary location. The mount is not
  // exposed to the usual locations (/home/user, /home/root).
  optional bool hidden_mount = 6;
}

// A BaseReply type is used for all cryptohomed responses. A shared base class
// is used because all calls will always reply with no-error or an error value.
// A centralized definition allows for a reusable reply handler for cases where
// there is no Request-specific reply data.  Any specialized data will live in
// an extension as per MountReply below:
//   if (reply.HasExtension(MountReply::reply)) { ... }
//
message BaseReply {
  // If a call was successful, error will not be defined (clear_error()).
  // If a call failed, it must set an error code (set_error(CODE)).
  // In either case, call-specific data may be added as an extension.
  optional CryptohomeErrorCode error = 1;

  extensions 1000 to max;
  // Next ID to use for extensions: 1011
}

// The MountRequest call may return more than just success or failure
// so it embeds itself in a BaseReply as an extension.
message MountReply {
  extend BaseReply {
    optional MountReply reply = 1000;
  }
  // |recreated| is set when the cryptohome had to be wiped
  // because the key or data was an unrecoverable.  It does not imply
  // failure to Mount nor is it 'true' when a CreateRequest creates
  // a cryptohome for the first time.
  optional bool recreated = 1 [default=false];
  // Returns the filesystem-sanitized username.
  optional string sanitized_username = 2;
}

message CreateRequest {
  repeated Key keys = 1;
  // Explicitly use the |key| from the AuthorizationRequest.
  // Setting this value means that the KeyData is filled as it
  // would be with a Key above or in an AddKeyRequest.
  optional bool copy_authorization_key = 2 [default=false];
  // If set to true, always use eCryptfs as the encryption method.
  optional bool force_ecryptfs = 3 [default=false];
  // In the future, this will contain account-wide data like
  // the deletion priority or the IdP's origin.
}

message AddKeyRequest {
  optional Key key = 1;
  optional bool clobber_if_exists = 2 [default=false];
}

message UpdateKeyRequest {
  optional Key changes = 1;
  optional bytes authorization_signature = 2;
}

message CheckKeyRequest {
}

message RemoveKeyRequest {
  // Only key.data().label() is used at present.
  optional Key key = 1;
}

message SignBootLockboxRequest {
  // The data to be signed.
  optional bytes data = 1;
}

message SignBootLockboxReply {
  extend BaseReply {
    optional SignBootLockboxReply reply = 1001;
  }
  optional bytes signature = 1;
}

message VerifyBootLockboxRequest {
  // The signed data to be verified.
  optional bytes data = 1;
  // The signature to be verified.
  optional bytes signature = 2;
}

message FinalizeBootLockboxRequest {
}

message GetKeyDataRequest {
  // |key| must supply at least one attribute and all others will be treated as
  // wildcards.  Currently only |key.data().label()| may be supplied.  Like
  // AuthorizationRequest, support can be added for queries by
  // |key.data().type()| to return all keys of a certain class, testing
  // |key.secret()|, or |key.data().provider_data()| entries.
  optional Key key = 1;
}

message GetKeyDataReply {
  extend BaseReply {
    optional GetKeyDataReply reply = 1002;
  }
  repeated KeyData key_data = 1;
}

message GetBootAttributeRequest {
  optional string name = 1;
}

message GetBootAttributeReply {
  extend BaseReply {
    optional GetBootAttributeReply reply = 1003;
  }
  optional bytes value = 1;
}

message SetBootAttributeRequest {
  optional string name = 1;
  optional bytes value = 2;
}

message FlushAndSignBootAttributesRequest {
}

message ListKeysRequest {
  // The default behavior is by label so any extension here should honor that.
}

message ListKeysReply {
  extend BaseReply {
    optional ListKeysReply reply = 1004;
  }
  repeated string labels = 1;
}

message GetLoginStatusRequest {
}

message GetLoginStatusReply {
  extend BaseReply {
    optional GetLoginStatusReply reply = 1005;
  }
  optional bool owner_user_exists=1;
  optional bool boot_lockbox_finalized=2;
}

message GetTpmStatusRequest {
}

message GetTpmStatusReply {
  extend BaseReply {
    optional GetTpmStatusReply reply = 1006;
  }

  message Identity {
    // The identity features.
    optional int32 features = 1;
  }

  message IdentityCertificate {
    // The identity that is enrolled.
    optional int32 identity = 1;
    // The Privacy CA that the identity is enrolled with.
    optional int32 aca = 2;
  }

  // Whether a TPM is enabled on the system.
  optional bool enabled = 1;
  // Whether the TPM has been owned.
  optional bool owned = 2;
  // Whether the TPM initialization flow has completed. This includes taking
  // ownership, preparing attestation data, and finalizing lockbox NVRAM.
  optional bool initialized = 3;
  // The TPM owner password. This is only available when (owned &&
  // !initialized) and sometimes not even then.
  optional string owner_password = 4;
  // Whether attestation data has been prepared. This includes reading the
  // endorsement certificate out of NVRAM and generating an identity key. This
  // does not include any kind of enrollment with a Privacy CA.
  optional bool attestation_prepared = 7;
  // Whether the device has enrolled with a Privacy CA. This means the identity
  // key has been successfully certified.
  optional bool attestation_enrolled = 8;
  // The current dictionary attack counter value.
  optional int32 dictionary_attack_counter = 9;
  // The current dictionary attack counter threshold.
  optional int32 dictionary_attack_threshold = 10;
  // Whether the TPM is in some form of dictionary attack lockout.
  optional bool dictionary_attack_lockout_in_effect = 11;
  // The number of seconds remaining in the lockout.
  optional int32 dictionary_attack_lockout_seconds_remaining = 12;
  // Whether the install lockbox has been finalized.
  optional bool install_lockbox_finalized = 13;
  // Whether the boot lockbox has been finalized.
  optional bool boot_lockbox_finalized = 14;
  // Whether the current PCR values show a verified boot.
  optional bool verified_boot_measured = 15;
  // List of identities and their identity features.
  repeated Identity identities = 16;
  // List of identity certificates.
  map<int32, IdentityCertificate> identity_certificates = 17;
}

message GetEndorsementInfoRequest {
}

message GetEndorsementInfoReply {
  extend BaseReply {
    optional GetEndorsementInfoReply reply = 1007;
  }
  // The endorsement public key (PKCS #1 RSAPublicKey).
  optional bytes ek_public_key = 1;
  // The endorsement certificate (X.509).
  optional bytes ek_certificate = 2;
}

message InitializeCastKeyRequest {
}

// Flags for GetFirmwareManagementParametersReply and
// SetFirmwareManagementParametersRequest
enum FirmwareManagementParametersFlags {
  NONE = 0;
  DEVELOPER_DISABLE_BOOT = 1;
  DEVELOPER_DISABLE_RECOVERY_INSTALL = 2;
  DEVELOPER_DISABLE_RECOVERY_ROOTFS = 4;
  DEVELOPER_ENABLE_USB = 8;
  DEVELOPER_ENABLE_LEGACY = 16;
  DEVELOPER_USE_KEY_HASH = 32;
  DEVELOPER_DISABLE_CASE_CLOSED_DEBUGGING_UNLOCK = 64;
}

message GetFirmwareManagementParametersRequest {
}

message GetFirmwareManagementParametersReply {
  extend BaseReply {
    optional GetFirmwareManagementParametersReply reply = 1008;
  }

  // Flags (zero or more from FirmwareManagementParametersFlags)
  optional int32 flags = 1;
  optional bytes developer_key_hash = 2;
}

message SetFirmwareManagementParametersRequest {
  // Flags (zero or more from FirmwareManagementParametersFlags)
  optional int32 flags = 1;
  optional bytes developer_key_hash = 2;
}

message RemoveFirmwareManagementParametersRequest {
}

message GetAccountDiskUsageReply {
  extend BaseReply {
    optional GetAccountDiskUsageReply reply = 1009;
  }
  // The size of cryptohome in bytes.
  optional int64 size = 1;
}

// Request parameters for MigrateToDircrypto.
message MigrateToDircryptoRequest {
  // Next ID to use: 2

  // If true, only a few paths (specified in cryptohomed) that are necessary for
  // a working profile will be migrated. Most user data will be wiped.
  optional bool minimal_migration = 1;
}

// Request parameters for challenge requests for keys of the
// |KEY_TYPE_CHALLENGE_RESPONSE| type.
message KeyChallengeRequest {
  // Specifies challenge types.
  enum ChallengeType {
    // Challenge is a request of a cryptographic signature of the specified data
    // using the specified key.
    CHALLENGE_TYPE_SIGNATURE = 1;
  }
  // Type of the requested challenge.
  optional ChallengeType challenge_type = 1;
  // Is set when |challenge_type| is |CHALLENGE_TYPE_SIGNATURE|. Contains the
  // challenge request data.
  optional SignatureKeyChallengeRequestData signature_request_data = 2;
}

// Request data for challenge requests of the |CHALLENGE_TYPE_SIGNATURE| request
// type.
message SignatureKeyChallengeRequestData {
  // The blob of data for which the signature is asked.
  optional bytes data_to_sign = 1;
  // Specifies the key which is asked to sign the data. Contains the DER-encoded
  // blob of the X.509 Subject Public Key Info.
  optional bytes public_key_spki_der = 2;
  // Specifies the signature algorithm that has to be used.
  optional ChallengeSignatureAlgorithm signature_algorithm = 3;
}

// Response for challenge requests.
message KeyChallengeResponse {
  // Is set for responses to challenge requests of the
  // |CHALLENGE_TYPE_SIGNATURE| challenge type. Contains the challenge response
  // data.
  optional SignatureKeyChallengeResponseData signature_response_data = 1;
}

// Response data for challenge requests of the |CHALLENGE_TYPE_SIGNATURE|
// challenge type.
message SignatureKeyChallengeResponseData {
  // The signature blob of the requested data.
  optional bytes signature = 1;
}

// Request a GetSupportedKeyPoliciesReply from cryptohome.
message GetSupportedKeyPoliciesRequest {
}

// Response that informs the caller which KeyPolicy features are supported.
message GetSupportedKeyPoliciesReply {
  // Next ID to use: 2

  extend BaseReply {
    optional GetSupportedKeyPoliciesReply reply = 1010;
  }

  // Does it support low entropy credentials.
  optional bool low_entropy_credentials = 1;
}

message MigrateKeyRequest {
  optional bytes secret = 1;
}

// Mount the guest user partition.
message MountGuestRequest {
}