• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * siemens am33x common board options
4  * (C) Copyright 2013 Siemens Schweiz AG
5  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
6  *
7  * Based on:
8  * U-Boot file:/include/configs/am335x_evm.h
9  *
10  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
11  */
12 
13 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
14 #define __CONFIG_SIEMENS_AM33X_COMMON_H
15 
16 #include <asm/arch/omap.h>
17 
18 #define CONFIG_DMA_COHERENT
19 #define CONFIG_DMA_COHERENT_SIZE	(1 << 20)
20 
21 #define CONFIG_ENV_SIZE			(0x2000)
22 #define CONFIG_SYS_MALLOC_LEN		(16 * 1024 * 1024)
23 #ifdef CONFIG_SIEMENS_MACH_TYPE
24 #define CONFIG_MACH_TYPE		CONFIG_SIEMENS_MACH_TYPE
25 #endif
26 
27 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
28 #define CONFIG_SETUP_MEMORY_TAGS
29 #define CONFIG_INITRD_TAG
30 
31 /* commands to include */
32 
33 #ifndef CONFIG_SPL_BUILD
34 #define CONFIG_ROOTPATH		"/opt/eldk"
35 #endif
36 
37 #define CONFIG_ENV_OVERWRITE		1
38 
39 #define CONFIG_SYS_AUTOLOAD	"yes"
40 
41 /* Clock Defines */
42 #define V_OSCK				24000000  /* Clock output from T2 */
43 #define V_SCLK				(V_OSCK)
44 
45 /* We set the max number of command args high to avoid HUSH bugs. */
46 #define CONFIG_SYS_MAXARGS		32
47 
48 /* Console I/O Buffer Size */
49 #define CONFIG_SYS_CBSIZE		1024
50 
51 /* Boot Argument Buffer Size */
52 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
53 
54 /*
55  * memtest works on 8 MB in DRAM after skipping 32MB from
56  * start addr of ram disk
57  */
58 #define CONFIG_SYS_MEMTEST_START	(PHYS_DRAM_1 + (64 * 1024 * 1024))
59 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START \
60 					+ (8 * 1024 * 1024))
61 
62 #define CONFIG_SYS_LOAD_ADDR		0x81000000 /* Default load address */
63 
64 #define CONFIG_MTD_DEVICE
65 #define CONFIG_SF_DEFAULT_SPEED		(75000000)
66 
67  /* Physical Memory Map */
68 #define CONFIG_NR_DRAM_BANKS		1		/*  1 bank of DRAM */
69 #define PHYS_DRAM_1			0x80000000	/* DRAM Bank #1 */
70 
71 #define CONFIG_SYS_SDRAM_BASE		PHYS_DRAM_1
72 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
73 						GENERATED_GBL_DATA_SIZE)
74  /* Platform/Board specific defs */
75 #define CONFIG_SYS_TIMERBASE		0x48040000	/* Use Timer2 */
76 #define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
77 
78 /* NS16550 Configuration */
79 #ifdef CONFIG_SPL_BUILD
80 #define CONFIG_SYS_NS16550_SERIAL
81 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
82 #endif
83 #define CONFIG_SYS_NS16550_CLK		(48000000)
84 #define CONFIG_SYS_NS16550_COM1		0x44e09000
85 #define CONFIG_SYS_NS16550_COM4		0x481a6000
86 
87 #define CONFIG_SERIAL1                  1
88 
89 /* I2C Configuration */
90 #define CONFIG_I2C
91 #define CONFIG_SYS_I2C
92 
93 /* Defines for SPL */
94 #define CONFIG_SPL_TEXT_BASE		0x402F0400
95 #define CONFIG_SPL_MAX_SIZE		(SRAM_SCRATCH_SPACE_ADDR - \
96 					 CONFIG_SPL_TEXT_BASE)
97 
98 #define CONFIG_SPL_BSS_START_ADDR	0x80000000
99 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000		/* 512 KB */
100 
101 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
102 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
103 
104 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
105 
106 #define CONFIG_SPL_NAND_BASE
107 #define CONFIG_SPL_NAND_DRIVERS
108 #define CONFIG_SPL_NAND_ECC
109 #define CONFIG_SYS_NAND_ONFI_DETECTION
110 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
111 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
112 					 CONFIG_SYS_NAND_PAGE_SIZE)
113 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
114 #define CONFIG_SYS_NAND_OOBSIZE		64
115 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
116 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
117 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
118 					 10, 11, 12, 13, 14, 15, 16, 17, \
119 					 18, 19, 20, 21, 22, 23, 24, 25, \
120 					 26, 27, 28, 29, 30, 31, 32, 33, \
121 					 34, 35, 36, 37, 38, 39, 40, 41, \
122 					 42, 43, 44, 45, 46, 47, 48, 49, \
123 					 50, 51, 52, 53, 54, 55, 56, 57, }
124 
125 #define CONFIG_SYS_NAND_ECCSIZE		512
126 #define CONFIG_SYS_NAND_ECCBYTES	14
127 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
128 
129 #define CONFIG_SYS_NAND_ECCSTEPS	4
130 #define	CONFIG_SYS_NAND_ECCTOTAL	(CONFIG_SYS_NAND_ECCBYTES * \
131 						CONFIG_SYS_NAND_ECCSTEPS)
132 
133 #define	CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE
134 
135 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
136 
137 /*
138  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
139  * 64 bytes before this address should be set aside for u-boot.img's
140  * header. That is 0x800FFFC0--0x80100000 should not be used for any
141  * other needs.
142  */
143 #define CONFIG_SYS_SPL_MALLOC_START	0x80208000
144 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
145 
146 /*
147  * Since SPL did pll and ddr initialization for us,
148  * we don't need to do it twice.
149  */
150 #ifndef CONFIG_SPL_BUILD
151 #define CONFIG_SKIP_LOWLEVEL_INIT
152 #endif
153 
154 #ifndef CONFIG_SPL_BUILD
155 /*
156  * USB configuration
157  */
158 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
159 
160 #define CONFIG_AM335X_USB0
161 #define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
162 #define CONFIG_AM335X_USB1
163 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
164 
165 /* USB DRACO ID as default */
166 #define CONFIG_USBD_HS
167 
168 /* USB Device Firmware Update support */
169 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	(1 << 20)
170 #define DFU_MANIFEST_POLL_TIMEOUT	25000
171 
172 #endif /* CONFIG_SPL_BUILD */
173 
174 /*
175  * Default to using SPI for environment, etc.  We have multiple copies
176  * of SPL as the ROM will check these locations.
177  * 0x0 - 0x20000 : First copy of SPL
178  * 0x20000 - 0x40000 : Second copy of SPL
179  * 0x40000 - 0x60000 : Third copy of SPL
180  * 0x60000 - 0x80000 : Fourth copy of SPL
181  * 0x80000 - 0xDF000 : U-Boot
182  * 0xDF000 - 0xE0000 : U-Boot Environment
183  * 0xE0000 - 0x442000 : Linux Kernel
184  * 0x442000 - 0x800000 : Userland
185  */
186 #if defined(CONFIG_SPI_BOOT)
187 # define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
188 # define CONFIG_ENV_OFFSET		(892 << 10) /* 892 KiB in */
189 # define CONFIG_ENV_SECT_SIZE		(4 << 10) /* 4 KB sectors */
190 #endif /* SPI support */
191 
192 #define CONFIG_MII
193 #define CONFIG_BOOTP_DEFAULT
194 #define CONFIG_BOOTP_DNS2
195 #define CONFIG_BOOTP_SEND_HOSTNAME
196 #define CONFIG_NET_RETRY_COUNT         10
197 
198 /* NAND support */
199 #ifdef CONFIG_NAND
200 /* UBI Support */
201 #ifndef CONFIG_SPL_BUILD
202 #define CONFIG_MTD_PARTITIONS
203 #define CONFIG_MTD_DEVICE
204 #endif
205 
206 /* Commen environment */
207 #define CONFIG_PREBOOT
208 #define COMMON_ENV_DFU_ARGS	"dfu_args=run bootargs_defaults;" \
209 				"setenv bootargs ${bootargs};" \
210 				"mtdparts default;" \
211 				"draco_led 1;" \
212 				"dfu 0 nand 0;" \
213 				"draco_led 0;\0" \
214 
215 #define COMMON_ENV_NAND_BOOT \
216 		"nand_boot=echo Booting from nand; " \
217 		"if test ${upgrade_available} -eq 1; then " \
218 			"if test ${bootcount} -gt ${bootlimit}; " \
219 				"then " \
220 				"setenv upgrade_available 0;" \
221 				"setenv ${partitionset_active} true;" \
222 				"if test -n ${A}; then " \
223 					"setenv partitionset_active B; " \
224 					"env delete A; " \
225 				"fi;" \
226 				"if test -n ${B}; then " \
227 					"setenv partitionset_active A; " \
228 					"env delete B; " \
229 				"fi;" \
230 				"saveenv; " \
231 			"fi;" \
232 		"fi;" \
233 		"echo set ${partitionset_active}...;" \
234 		"run nand_args; "
235 
236 #define COMMON_ENV_NAND_CMDS	"flash_self=run nand_boot\0" \
237 				"flash_self_test=setenv testargs test; " \
238 					"run nand_boot\0" \
239 				"dfu_start=echo Preparing for dfu mode ...; " \
240 				"run dfu_args; \0"
241 
242 #define COMMON_ENV_SETTINGS \
243 	"verify=no \0" \
244 	"project_dir=targetdir\0" \
245 	"upgrade_available=0\0" \
246 	"altbootcmd=run bootcmd\0" \
247 	"bootlimit=3\0" \
248 	"partitionset_active=A\0" \
249 	"loadaddr=0x82000000\0" \
250 	"kloadaddr=0x81000000\0" \
251 	"script_addr=0x81900000\0" \
252 	"console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
253 	"nfsopts=nolock rw\0" \
254 	"ip_method=none\0" \
255 	"bootenv=uEnv.txt\0" \
256 	"bootargs_defaults=setenv bootargs " \
257 		"console=${console} " \
258 		"${testargs} " \
259 		"${optargs}\0" \
260 	"siemens_help=echo; "\
261 		"echo Type 'run flash_self' to use kernel and root " \
262 		"filesystem on memory; echo Type 'run flash_self_test' to " \
263 		"use kernel and root filesystem on memory, boot in test " \
264 		"mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
265 		"from memory and root filesystem over NFS; echo Type " \
266 		"'run net_nfs' to get Kernel over TFTP and mount root " \
267 		"filesystem over NFS; " \
268 		"echo Set partitionset_active variable to 'A' " \
269 		"or 'B' to select kernel and rootfs partition; " \
270 		"echo" \
271 		"\0"
272 
273 /*
274  * Variant 1 partition layout
275  * chip-size = 256MiB
276  *|         name |        size |           address area |
277  *-------------------------------------------------------
278  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
279  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
280  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
281  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
282  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
283  *|    uboot.env | 128.000 KiB | 0x  260000..0x  27ffff |
284  *|     kernel_a |   5.000 MiB | 0x  280000..0x  77ffff |
285  *|     kernel_b |   5.000 MiB | 0x  780000..0x  c7ffff |
286  *|      mtdoops |   8.000 MiB | 0x  c80000..0x 147ffff |
287  *|       rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
288  *-------------------------------------------------------
289 
290 					"mtdparts=omap2-nand.0:" \
291 					"128k(spl),"		\
292 					"128k(spl.backup1),"	\
293 					"128k(spl.backup2),"	\
294 					"128k(spl.backup3),"	\
295 					"1920k(u-boot),"	\
296 					"128k(uboot.env),"	\
297 					"5120k(kernel_a),"	\
298 					"5120k(kernel_b),"	\
299 					"8192k(mtdoops),"	\
300 					"-(rootfs)"
301  */
302 
303 #define DFU_ALT_INFO_NAND_V1 \
304 	"spl part 0 1;" \
305 	"spl.backup1 part 0 2;" \
306 	"spl.backup2 part 0 3;" \
307 	"spl.backup3 part 0 4;" \
308 	"u-boot part 0 5;" \
309 	"u-boot.env part 0 6;" \
310 	"kernel_a part 0 7;" \
311 	"kernel_b part 0 8;" \
312 	"rootfs partubi 0 10"
313 
314 #define CONFIG_ENV_SETTINGS_NAND_V1 \
315 	"nand_active_ubi_vol=rootfs_a\0" \
316 	"nand_active_ubi_vol_A=rootfs_a\0" \
317 	"nand_active_ubi_vol_B=rootfs_b\0" \
318 	"nand_root_fs_type=ubifs rootwait=1\0" \
319 	"nand_src_addr=0x280000\0" \
320 	"nand_src_addr_A=0x280000\0" \
321 	"nand_src_addr_B=0x780000\0" \
322 	"nand_args=run bootargs_defaults;" \
323 		"mtdparts default;" \
324 		"setenv ${partitionset_active} true;" \
325 		"if test -n ${A}; then " \
326 			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
327 			"setenv nand_src_addr ${nand_src_addr_A};" \
328 		"fi;" \
329 		"if test -n ${B}; then " \
330 			"setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
331 			"setenv nand_src_addr ${nand_src_addr_B};" \
332 		"fi;" \
333 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
334 		"ubi.mtd=9,${ubi_off};" \
335 		"setenv bootargs ${bootargs} " \
336 		"root=${nand_root} noinitrd ${mtdparts} " \
337 		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
338 		"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
339 		"=mtdoops\0" \
340 	COMMON_ENV_DFU_ARGS \
341 		"dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
342 	COMMON_ENV_NAND_BOOT \
343 		"nand read.i ${kloadaddr} ${nand_src_addr} " \
344 		"${nand_img_size}; bootm ${kloadaddr}\0" \
345 	COMMON_ENV_NAND_CMDS
346 
347 #define CONFIG_ENV_SETTINGS_V1 \
348 		COMMON_ENV_SETTINGS \
349 	"net_args=run bootargs_defaults;" \
350 		"mtdparts default;" \
351 		"setenv bootfile ${project_dir}/kernel/uImage;" \
352 		"setenv rootpath /home/projects/${project_dir}/rootfs;" \
353 		"setenv bootargs ${bootargs} " \
354 		"root=/dev/nfs ${mtdparts} " \
355 		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
356 		"ip=${ipaddr}:${serverip}:" \
357 		"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
358 	"net_nfs=echo Booting from network ...; " \
359 		"run net_args; " \
360 		"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
361 		"bootm ${kloadaddr}\0"
362 
363 /*
364  * Variant 2 partition layout (default)
365  * chip-size = 256MiB or 512 MiB
366  *|         name |        size |           address area |
367  *-------------------------------------------------------
368  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
369  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
370  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
371  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
372  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
373  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
374  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
375  *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
376  *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
377  *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
378  *-------------------------------------------------------
379  */
380 
381 #define DFU_ALT_INFO_NAND_V2 \
382 	"spl part 0 1;" \
383 	"spl.backup1 part 0 2;" \
384 	"spl.backup2 part 0 3;" \
385 	"spl.backup3 part 0 4;" \
386 	"u-boot part 0 5;" \
387 	"u-boot.env0 part 0 6;" \
388 	"u-boot.env1 part 0 7;" \
389 	"rootfs partubi 0 9" \
390 
391 #define CONFIG_ENV_SETTINGS_NAND_V2 \
392 	"nand_active_ubi_vol=rootfs_a\0" \
393 	"rootfs_name=rootfs\0" \
394 	"kernel_name=uImage\0"\
395 	"nand_root_fs_type=ubifs rootwait=1\0" \
396 	"nand_args=run bootargs_defaults;" \
397 		"mtdparts default;" \
398 		"setenv ${partitionset_active} true;" \
399 		"if test -n ${A}; then " \
400 			"setenv nand_active_ubi_vol ${rootfs_name}_a;" \
401 		"fi;" \
402 		"if test -n ${B}; then " \
403 			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
404 		"fi;" \
405 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
406 		"ubi.mtd=rootfs,2048;" \
407 		"setenv bootargs ${bootargs} " \
408 		"root=${nand_root} noinitrd ${mtdparts} " \
409 		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
410 		"console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
411 		"=mtdoops\0" \
412 	COMMON_ENV_DFU_ARGS \
413 		"dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
414 	COMMON_ENV_NAND_BOOT \
415 		"ubi part rootfs ${ubi_off};" \
416 		"ubifsmount ubi0:${nand_active_ubi_vol};" \
417 		"ubifsload ${kloadaddr} boot/${kernel_name};" \
418 		"ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
419 		"bootm ${kloadaddr} - ${loadaddr}\0" \
420 	"nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
421 		"bootm ${kloadaddr} - ${loadaddr}\0" \
422 	COMMON_ENV_NAND_CMDS
423 
424 #define CONFIG_ENV_SETTINGS_V2 \
425 		COMMON_ENV_SETTINGS \
426 	"net_args=run bootargs_defaults;" \
427 		"mtdparts default;" \
428 		"setenv bootfile ${project_dir}/kernel/uImage;" \
429 		"setenv bootdtb ${project_dir}/kernel/dtb;" \
430 		"setenv rootpath /home/projects/${project_dir}/rootfs;" \
431 		"setenv bootargs ${bootargs} " \
432 		"root=/dev/nfs ${mtdparts} " \
433 		"nfsroot=${serverip}:${rootpath},${nfsopts} " \
434 		"ip=${ipaddr}:${serverip}:" \
435 		"${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
436 	"net_nfs=echo Booting from network ...; " \
437 		"run net_args; " \
438 		"tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
439 		"tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
440 		"bootm ${kloadaddr} - ${loadaddr}\0"
441 
442 /*
443  * Variant 3 partition layout
444  * chip-size = 512MiB
445  *|         name |        size |           address area |
446  *-------------------------------------------------------
447  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
448  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
449  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
450  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
451  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
452  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
453  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
454  *|       rootfs | 300.000 MiB | 0x  360000..0x12f5ffff |
455  *|      mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
456  *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
457  *-------------------------------------------------------
458 
459 					"mtdparts=omap2-nand.0:" \
460 					"128k(spl),"		\
461 					"128k(spl.backup1),"	\
462 					"128k(spl.backup2),"	\
463 					"128k(spl.backup3),"	\
464 					"1920k(u-boot),"	\
465 					"512k(u-boot.env0),"	\
466 					"512k(u-boot.env1),"	\
467 					"300m(rootfs),"		\
468 					"512k(mtdoops),"	\
469 					"-(configuration)"
470 
471  */
472 
473 #define CONFIG_SYS_NAND_BASE		(0x08000000)	/* physical address */
474 							/* to access nand at */
475 							/* CS0 */
476 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND
477 							   devices */
478 #if !defined(CONFIG_SPI_BOOT)
479 #define CONFIG_ENV_OFFSET		0x260000 /* environment starts here */
480 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
481 #endif
482 #endif
483 
484 /* Reboot after 60 sec if bootcmd fails */
485 #define CONFIG_RESET_TO_RETRY
486 #define CONFIG_BOOT_RETRY_TIME 60
487 
488 #endif	/* ! __CONFIG_SIEMENS_AM33X_COMMON_H */
489