1menu "ARM architecture" 2 depends on ARM 3 4config SYS_ARCH 5 default "arm" 6 7config ARM64 8 bool 9 select PHYS_64BIT 10 select SYS_CACHE_SHIFT_6 11 12if ARM64 13config POSITION_INDEPENDENT 14 bool "Generate position-independent pre-relocation code" 15 help 16 U-Boot expects to be linked to a specific hard-coded address, and to 17 be loaded to and run from that address. This option lifts that 18 restriction, thus allowing the code to be loaded to and executed 19 from almost any address. This logic relies on the relocation 20 information that is embedded into the binary to support U-Boot 21 relocating itself to the top-of-RAM later during execution. 22 23config SYS_INIT_SP_BSS_OFFSET 24 int 25 help 26 U-Boot typically uses a hard-coded value for the stack pointer 27 before relocation. Define this option to instead calculate the 28 initial SP at run-time. This is useful to avoid hard-coding addresses 29 into U-Boot, so that can be loaded and executed at arbitrary 30 addresses and thus avoid using arbitrary addresses at runtime. This 31 option's value is the offset added to &_bss_start in order to 32 calculate the stack pointer. This offset should be large enough so 33 that the early malloc region, global data (gd), and early stack usage 34 do not overlap any appended DTB. 35 36config LINUX_KERNEL_IMAGE_HEADER 37 bool 38 help 39 Place a Linux kernel image header at the start of the U-Boot binary. 40 The format of the header is described in the Linux kernel source at 41 Documentation/arm64/booting.txt. This feature is useful since the 42 image header reports the amount of memory (BSS and similar) that 43 U-Boot needs to use, but which isn't part of the binary. 44 45if LINUX_KERNEL_IMAGE_HEADER 46config LNX_KRNL_IMG_TEXT_OFFSET_BASE 47 hex 48 help 49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the 50 TEXT_OFFSET value written in to the Linux kernel image header. 51endif 52endif 53 54config STATIC_RELA 55 bool 56 default y if ARM64 && !POSITION_INDEPENDENT 57 58config DMA_ADDR_T_64BIT 59 bool 60 default y if ARM64 61 62config HAS_VBAR 63 bool 64 65config HAS_THUMB2 66 bool 67 68# Used for compatibility with asm files copied from the kernel 69config ARM_ASM_UNIFIED 70 bool 71 default y 72 73# Used for compatibility with asm files copied from the kernel 74config THUMB2_KERNEL 75 bool 76 77config SYS_ARM_CACHE_CP15 78 bool "CP15 based cache enabling support" 79 help 80 Select this if your processor suports enabling caches by using 81 CP15 registers. 82 83config SYS_ARM_MMU 84 bool "MMU-based Paged Memory Management Support" 85 select SYS_ARM_CACHE_CP15 86 help 87 Select if you want MMU-based virtualised addressing space 88 support by paged memory management. 89 90config SYS_ARM_MPU 91 bool 'Use the ARM v7 PMSA Compliant MPU' 92 help 93 Some ARM systems without an MMU have instead a Memory Protection 94 Unit (MPU) that defines the type and permissions for regions of 95 memory. 96 If your CPU has an MPU then you should choose 'y' here unless you 97 know that you do not want to use the MPU. 98 99# If set, the workarounds for these ARM errata are applied early during U-Boot 100# startup. Note that in general these options force the workarounds to be 101# applied; no CPU-type/version detection exists, unlike the similar options in 102# the Linux kernel. Do not set these options unless they apply! Also note that 103# the following can be machine specific errata. These do have ability to 104# provide rudimentary version and machine specific checks, but expect no 105# product checks: 106# CONFIG_ARM_ERRATA_430973 107# CONFIG_ARM_ERRATA_454179 108# CONFIG_ARM_ERRATA_621766 109# CONFIG_ARM_ERRATA_798870 110# CONFIG_ARM_ERRATA_801819 111# CONFIG_ARM_CORTEX_A8_CVE_2017_5715 112# CONFIG_ARM_CORTEX_A15_CVE_2017_5715 113 114config ARM_ERRATA_430973 115 bool 116 117config ARM_ERRATA_454179 118 bool 119 120config ARM_ERRATA_621766 121 bool 122 123config ARM_ERRATA_716044 124 bool 125 126config ARM_ERRATA_725233 127 bool 128 129config ARM_ERRATA_742230 130 bool 131 132config ARM_ERRATA_743622 133 bool 134 135config ARM_ERRATA_751472 136 bool 137 138config ARM_ERRATA_761320 139 bool 140 141config ARM_ERRATA_773022 142 bool 143 144config ARM_ERRATA_774769 145 bool 146 147config ARM_ERRATA_794072 148 bool 149 150config ARM_ERRATA_798870 151 bool 152 153config ARM_ERRATA_801819 154 bool 155 156config ARM_ERRATA_826974 157 bool 158 159config ARM_ERRATA_828024 160 bool 161 162config ARM_ERRATA_829520 163 bool 164 165config ARM_ERRATA_833069 166 bool 167 168config ARM_ERRATA_833471 169 bool 170 171config ARM_ERRATA_845369 172 bool 173 174config ARM_ERRATA_852421 175 bool 176 177config ARM_ERRATA_852423 178 bool 179 180config ARM_ERRATA_855873 181 bool 182 183config ARM_CORTEX_A8_CVE_2017_5715 184 bool 185 186config ARM_CORTEX_A15_CVE_2017_5715 187 bool 188 189config CPU_ARM720T 190 bool 191 select SYS_CACHE_SHIFT_5 192 imply SYS_ARM_MMU 193 194config CPU_ARM920T 195 bool 196 select SYS_CACHE_SHIFT_5 197 imply SYS_ARM_MMU 198 199config CPU_ARM926EJS 200 bool 201 select SYS_CACHE_SHIFT_5 202 imply SYS_ARM_MMU 203 204config CPU_ARM946ES 205 bool 206 select SYS_CACHE_SHIFT_5 207 imply SYS_ARM_MMU 208 209config CPU_ARM1136 210 bool 211 select SYS_CACHE_SHIFT_5 212 imply SYS_ARM_MMU 213 214config CPU_ARM1176 215 bool 216 select HAS_VBAR 217 select SYS_CACHE_SHIFT_5 218 imply SYS_ARM_MMU 219 220config CPU_V7A 221 bool 222 select HAS_VBAR 223 select HAS_THUMB2 224 select SYS_CACHE_SHIFT_6 225 imply SYS_ARM_MMU 226 227config CPU_V7M 228 bool 229 select HAS_THUMB2 230 select THUMB2_KERNEL 231 select SYS_CACHE_SHIFT_5 232 select SYS_ARM_MPU 233 select SYS_THUMB_BUILD 234 235config CPU_V7R 236 bool 237 select HAS_THUMB2 238 select SYS_CACHE_SHIFT_6 239 select SYS_ARM_MPU 240 select SYS_ARM_CACHE_CP15 241 242config CPU_PXA 243 bool 244 select SYS_CACHE_SHIFT_5 245 imply SYS_ARM_MMU 246 247config CPU_SA1100 248 bool 249 select SYS_CACHE_SHIFT_5 250 imply SYS_ARM_MMU 251 252config SYS_CPU 253 default "arm720t" if CPU_ARM720T 254 default "arm920t" if CPU_ARM920T 255 default "arm926ejs" if CPU_ARM926EJS 256 default "arm946es" if CPU_ARM946ES 257 default "arm1136" if CPU_ARM1136 258 default "arm1176" if CPU_ARM1176 259 default "armv7" if CPU_V7A 260 default "armv7" if CPU_V7R 261 default "armv7m" if CPU_V7M 262 default "pxa" if CPU_PXA 263 default "sa1100" if CPU_SA1100 264 default "armv8" if ARM64 265 266config SYS_ARM_ARCH 267 int 268 default 4 if CPU_ARM720T 269 default 4 if CPU_ARM920T 270 default 5 if CPU_ARM926EJS 271 default 5 if CPU_ARM946ES 272 default 6 if CPU_ARM1136 273 default 6 if CPU_ARM1176 274 default 7 if CPU_V7A 275 default 7 if CPU_V7M 276 default 7 if CPU_V7R 277 default 5 if CPU_PXA 278 default 4 if CPU_SA1100 279 default 8 if ARM64 280 281config SYS_CACHE_SHIFT_5 282 bool 283 284config SYS_CACHE_SHIFT_6 285 bool 286 287config SYS_CACHE_SHIFT_7 288 bool 289 290config SYS_CACHELINE_SIZE 291 int 292 default 128 if SYS_CACHE_SHIFT_7 293 default 64 if SYS_CACHE_SHIFT_6 294 default 32 if SYS_CACHE_SHIFT_5 295 296config SYS_ARCH_TIMER 297 bool "ARM Generic Timer support" 298 depends on CPU_V7A || ARM64 299 default y if ARM64 300 help 301 The ARM Generic Timer (aka arch-timer) provides an architected 302 interface to a timer source on an SoC. 303 It is mandantory for ARMv8 implementation and widely available 304 on ARMv7 systems. 305 306config ARM_SMCCC 307 bool "Support for ARM SMC Calling Convention (SMCCC)" 308 depends on CPU_V7A || ARM64 309 select ARM_PSCI_FW 310 help 311 Say Y here if you want to enable ARM SMC Calling Convention. 312 This should be enabled if U-Boot needs to communicate with system 313 firmware (for example, PSCI) according to SMCCC. 314 315config SEMIHOSTING 316 bool "support boot from semihosting" 317 help 318 In emulated environments, semihosting is a way for 319 the hosted environment to call out to the emulator to 320 retrieve files from the host machine. 321 322config SYS_THUMB_BUILD 323 bool "Build U-Boot using the Thumb instruction set" 324 depends on !ARM64 325 help 326 Use this flag to build U-Boot using the Thumb instruction set for 327 ARM architectures. Thumb instruction set provides better code 328 density. For ARM architectures that support Thumb2 this flag will 329 result in Thumb2 code generated by GCC. 330 331config SPL_SYS_THUMB_BUILD 332 bool "Build SPL using the Thumb instruction set" 333 default y if SYS_THUMB_BUILD 334 depends on !ARM64 335 help 336 Use this flag to build SPL using the Thumb instruction set for 337 ARM architectures. Thumb instruction set provides better code 338 density. For ARM architectures that support Thumb2 this flag will 339 result in Thumb2 code generated by GCC. 340 341config SYS_L2CACHE_OFF 342 bool "L2cache off" 343 help 344 If SoC does not support L2CACHE or one do not want to enable 345 L2CACHE, choose this option. 346 347config ENABLE_ARM_SOC_BOOT0_HOOK 348 bool "prepare BOOT0 header" 349 help 350 If the SoC's BOOT0 requires a header area filled with (magic) 351 values, then choose this option, and create a file included as 352 <asm/arch/boot0.h> which contains the required assembler code. 353 354config ARM_CORTEX_CPU_IS_UP 355 bool 356 default n 357 358config USE_ARCH_MEMCPY 359 bool "Use an assembly optimized implementation of memcpy" 360 default y 361 depends on !ARM64 362 help 363 Enable the generation of an optimized version of memcpy. 364 Such implementation may be faster under some conditions 365 but may increase the binary size. 366 367config SPL_USE_ARCH_MEMCPY 368 bool "Use an assembly optimized implementation of memcpy for SPL" 369 default y if USE_ARCH_MEMCPY 370 depends on !ARM64 371 help 372 Enable the generation of an optimized version of memcpy. 373 Such implementation may be faster under some conditions 374 but may increase the binary size. 375 376config USE_ARCH_MEMSET 377 bool "Use an assembly optimized implementation of memset" 378 default y 379 depends on !ARM64 380 help 381 Enable the generation of an optimized version of memset. 382 Such implementation may be faster under some conditions 383 but may increase the binary size. 384 385config SPL_USE_ARCH_MEMSET 386 bool "Use an assembly optimized implementation of memset for SPL" 387 default y if USE_ARCH_MEMSET 388 depends on !ARM64 389 help 390 Enable the generation of an optimized version of memset. 391 Such implementation may be faster under some conditions 392 but may increase the binary size. 393 394config ARM64_SUPPORT_AARCH32 395 bool "ARM64 system support AArch32 execution state" 396 default y if ARM64 && !TARGET_THUNDERX_88XX 397 help 398 This ARM64 system supports AArch32 execution state. 399 400choice 401 prompt "Target select" 402 default TARGET_HIKEY 403 404config ARCH_AT91 405 bool "Atmel AT91" 406 select SPL_BOARD_INIT if SPL && !TARGET_SMARTWEB 407 408config TARGET_EDB93XX 409 bool "Support edb93xx" 410 select CPU_ARM920T 411 select PL010_SERIAL 412 413config TARGET_ASPENITE 414 bool "Support aspenite" 415 select CPU_ARM926EJS 416 417config TARGET_GPLUGD 418 bool "Support gplugd" 419 select CPU_ARM926EJS 420 421config ARCH_DAVINCI 422 bool "TI DaVinci" 423 select CPU_ARM926EJS 424 imply CMD_SAVES 425 help 426 Support for TI's DaVinci platform. 427 428config KIRKWOOD 429 bool "Marvell Kirkwood" 430 select CPU_ARM926EJS 431 select BOARD_EARLY_INIT_F 432 select ARCH_MISC_INIT 433 434config ARCH_MVEBU 435 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)" 436 select OF_CONTROL 437 select OF_SEPARATE 438 select DM 439 select DM_ETH 440 select DM_SERIAL 441 select DM_SPI 442 select DM_SPI_FLASH 443 select SPI 444 445config TARGET_DEVKIT3250 446 bool "Support devkit3250" 447 select CPU_ARM926EJS 448 select SUPPORT_SPL 449 450config TARGET_WORK_92105 451 bool "Support work_92105" 452 select CPU_ARM926EJS 453 select SUPPORT_SPL 454 455config TARGET_APF27 456 bool "Support apf27" 457 select CPU_ARM926EJS 458 select SUPPORT_SPL 459 460config ORION5X 461 bool "Marvell Orion" 462 select CPU_ARM926EJS 463 464config TARGET_SPEAR300 465 bool "Support spear300" 466 select CPU_ARM926EJS 467 select BOARD_EARLY_INIT_F 468 imply CMD_SAVES 469 select PL011_SERIAL 470 471config TARGET_SPEAR310 472 bool "Support spear310" 473 select CPU_ARM926EJS 474 select BOARD_EARLY_INIT_F 475 imply CMD_SAVES 476 select PL011_SERIAL 477 478config TARGET_SPEAR320 479 bool "Support spear320" 480 select CPU_ARM926EJS 481 select BOARD_EARLY_INIT_F 482 imply CMD_SAVES 483 select PL011_SERIAL 484 485config TARGET_SPEAR600 486 bool "Support spear600" 487 select CPU_ARM926EJS 488 select BOARD_EARLY_INIT_F 489 imply CMD_SAVES 490 select PL011_SERIAL 491 492config TARGET_STV0991 493 bool "Support stv0991" 494 select CPU_V7A 495 select DM 496 select DM_SERIAL 497 select DM_SPI 498 select DM_SPI_FLASH 499 select SPI 500 select SPI_FLASH 501 select PL01X_SERIAL 502 503config TARGET_X600 504 bool "Support x600" 505 select BOARD_LATE_INIT 506 select CPU_ARM926EJS 507 select SUPPORT_SPL 508 select PL011_SERIAL 509 510config TARGET_WOODBURN 511 bool "Support woodburn" 512 select CPU_ARM1136 513 514config TARGET_WOODBURN_SD 515 bool "Support woodburn_sd" 516 select CPU_ARM1136 517 select SUPPORT_SPL 518 519config TARGET_FLEA3 520 bool "Support flea3" 521 select CPU_ARM1136 522 523config TARGET_MX35PDK 524 bool "Support mx35pdk" 525 select BOARD_LATE_INIT 526 select CPU_ARM1136 527 528config ARCH_BCM283X 529 bool "Broadcom BCM283X family" 530 select DM 531 select DM_SERIAL 532 select DM_GPIO 533 select OF_CONTROL 534 select PL01X_SERIAL 535 select SERIAL_SEARCH_ALL 536 imply FAT_WRITE 537 538config TARGET_VEXPRESS_CA15_TC2 539 bool "Support vexpress_ca15_tc2" 540 select CPU_V7A 541 select CPU_V7_HAS_NONSEC 542 select CPU_V7_HAS_VIRT 543 select PL011_SERIAL 544 545config TARGET_VEXPRESS_CA5X2 546 bool "Support vexpress_ca5x2" 547 select CPU_V7A 548 select PL011_SERIAL 549 550config TARGET_VEXPRESS_CA9X4 551 bool "Support vexpress_ca9x4" 552 select CPU_V7A 553 select PL011_SERIAL 554 555config TARGET_BCM23550_W1D 556 bool "Support bcm23550_w1d" 557 select CPU_V7A 558 imply CRC32_VERIFY 559 imply FAT_WRITE 560 561config TARGET_BCM28155_AP 562 bool "Support bcm28155_ap" 563 select CPU_V7A 564 imply CRC32_VERIFY 565 imply FAT_WRITE 566 567config TARGET_BCMCYGNUS 568 bool "Support bcmcygnus" 569 select CPU_V7A 570 imply CRC32_VERIFY 571 imply CMD_HASH 572 imply FAT_WRITE 573 imply HASH_VERIFY 574 imply NETDEVICES 575 imply BCM_SF2_ETH 576 imply BCM_SF2_ETH_GMAC 577 578config TARGET_BCMNSP 579 bool "Support bcmnsp" 580 select CPU_V7A 581 582config TARGET_BCMNS2 583 bool "Support Broadcom Northstar2" 584 select ARM64 585 help 586 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit 587 ARMv8 Cortex-A57 processors targeting a broad range of networking 588 applications 589 590config ARCH_EXYNOS 591 bool "Samsung EXYNOS" 592 select DM 593 select DM_I2C 594 select DM_SPI_FLASH 595 select DM_SERIAL 596 select DM_SPI 597 select DM_GPIO 598 select DM_KEYBOARD 599 select SPI 600 imply FAT_WRITE 601 602config ARCH_S5PC1XX 603 bool "Samsung S5PC1XX" 604 select CPU_V7A 605 select DM 606 select DM_SERIAL 607 select DM_GPIO 608 select DM_I2C 609 610config ARCH_HIGHBANK 611 bool "Calxeda Highbank" 612 select CPU_V7A 613 select PL011_SERIAL 614 615config ARCH_INTEGRATOR 616 bool "ARM Ltd. Integrator family" 617 select DM 618 select DM_SERIAL 619 select PL01X_SERIAL 620 621config ARCH_KEYSTONE 622 bool "TI Keystone" 623 select CPU_V7A 624 select SUPPORT_SPL 625 select SYS_THUMB_BUILD 626 select CMD_POWEROFF 627 select SYS_ARCH_TIMER 628 imply CMD_MTDPARTS 629 imply FIT 630 imply CMD_SAVES 631 632config ARCH_OMAP2PLUS 633 bool "TI OMAP2+" 634 select CPU_V7A 635 select SPL_BOARD_INIT if SPL 636 select SPL_STACK_R if SPL 637 select SUPPORT_SPL 638 imply FIT 639 640config ARCH_MESON 641 bool "Amlogic Meson" 642 imply DISTRO_DEFAULTS 643 help 644 Support for the Meson SoC family developed by Amlogic Inc., 645 targeted at media players and tablet computers. We currently 646 support the S905 (GXBaby) 64-bit SoC. 647 648config ARCH_MX8M 649 bool "NXP i.MX8M platform" 650 select ARM64 651 select DM 652 select SUPPORT_SPL 653 654config ARCH_MX23 655 bool "NXP i.MX23 family" 656 select CPU_ARM926EJS 657 select PL011_SERIAL 658 select SUPPORT_SPL 659 660config ARCH_MX25 661 bool "NXP MX25" 662 select CPU_ARM926EJS 663 imply MXC_GPIO 664 665config ARCH_MX28 666 bool "NXP i.MX28 family" 667 select CPU_ARM926EJS 668 select PL011_SERIAL 669 select SUPPORT_SPL 670 671config ARCH_MX31 672 bool "NXP i.MX31 family" 673 select CPU_ARM1136 674 675config ARCH_MX7ULP 676 bool "NXP MX7ULP" 677 select CPU_V7A 678 select ROM_UNIFIED_SECTIONS 679 imply MXC_GPIO 680 681config ARCH_MX7 682 bool "Freescale MX7" 683 select CPU_V7A 684 select SYS_FSL_HAS_SEC if SECURE_BOOT 685 select SYS_FSL_SEC_COMPAT_4 686 select SYS_FSL_SEC_LE 687 select BOARD_EARLY_INIT_F 688 select ARCH_MISC_INIT 689 imply MXC_GPIO 690 691config ARCH_MX6 692 bool "Freescale MX6" 693 select CPU_V7A 694 select SYS_FSL_HAS_SEC if SECURE_BOOT 695 select SYS_FSL_SEC_COMPAT_4 696 select SYS_FSL_SEC_LE 697 select SYS_THUMB_BUILD if SPL 698 imply MXC_GPIO 699 700if ARCH_MX6 701config SPL_LDSCRIPT 702 default "arch/arm/mach-omap2/u-boot-spl.lds" 703endif 704 705config ARCH_MX5 706 bool "Freescale MX5" 707 select CPU_V7A 708 select BOARD_EARLY_INIT_F 709 imply MXC_GPIO 710 711config ARCH_QEMU 712 bool "QEMU Virtual Platform" 713 select DM 714 select DM_SERIAL 715 select OF_CONTROL 716 select PL01X_SERIAL 717 718config ARCH_RMOBILE 719 bool "Renesas ARM SoCs" 720 select DM 721 select DM_SERIAL 722 select BOARD_EARLY_INIT_F 723 imply FAT_WRITE 724 imply SYS_THUMB_BUILD 725 726config TARGET_S32V234EVB 727 bool "Support s32v234evb" 728 select ARM64 729 select SYS_FSL_ERRATUM_ESDHC111 730 731config ARCH_SNAPDRAGON 732 bool "Qualcomm Snapdragon SoCs" 733 select ARM64 734 select DM 735 select DM_GPIO 736 select DM_SERIAL 737 select SPMI 738 select OF_CONTROL 739 select OF_SEPARATE 740 741config ARCH_SOCFPGA 742 bool "Altera SOCFPGA family" 743 select ARCH_EARLY_INIT_R 744 select ARCH_MISC_INIT 745 select CPU_V7A 746 select DM 747 select DM_SERIAL 748 select ENABLE_ARM_SOC_BOOT0_HOOK 749 select OF_CONTROL 750 select SPL_LIBCOMMON_SUPPORT 751 select SPL_LIBDISK_SUPPORT 752 select SPL_LIBGENERIC_SUPPORT 753 select SPL_MMC_SUPPORT if DM_MMC 754 select SPL_NAND_SUPPORT if SPL_NAND_DENALI 755 select SPL_OF_CONTROL 756 select SPL_SERIAL_SUPPORT 757 select SPL_DM_SERIAL 758 select SPL_SPI_FLASH_SUPPORT if SPL_SPI_SUPPORT 759 select SPL_SPI_SUPPORT if DM_SPI 760 select SPL_WATCHDOG_SUPPORT 761 select SUPPORT_SPL 762 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE 763 select SYS_NS16550 764 select SYS_THUMB_BUILD 765 imply CMD_MTDPARTS 766 imply CRC32_VERIFY 767 imply DM_SPI 768 imply DM_SPI_FLASH 769 imply FAT_WRITE 770 imply HW_WATCHDOG 771 imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION 772 773config ARCH_SUNXI 774 bool "Support sunxi (Allwinner) SoCs" 775 select BINMAN 776 select CMD_GPIO 777 select CMD_MMC if MMC 778 select CMD_USB if DISTRO_DEFAULTS 779 select DM 780 select DM_ETH 781 select DM_GPIO 782 select DM_KEYBOARD 783 select DM_SERIAL 784 select DM_USB if DISTRO_DEFAULTS 785 select OF_BOARD_SETUP 786 select OF_CONTROL 787 select OF_SEPARATE 788 select SPECIFY_CONSOLE_INDEX 789 select SPL_STACK_R if SPL 790 select SPL_SYS_MALLOC_SIMPLE if SPL 791 select SYS_NS16550 792 select SPL_SYS_THUMB_BUILD if !ARM64 793 select SYS_THUMB_BUILD if !ARM64 794 select USB if DISTRO_DEFAULTS 795 select USB_STORAGE if DISTRO_DEFAULTS 796 select USB_KEYBOARD if DISTRO_DEFAULTS 797 select USE_TINY_PRINTF 798 imply CMD_GPT 799 imply DISTRO_DEFAULTS 800 imply FAT_WRITE 801 imply OF_LIBFDT_OVERLAY 802 imply PRE_CONSOLE_BUFFER 803 imply SPL_GPIO_SUPPORT 804 imply SPL_LIBCOMMON_SUPPORT 805 imply SPL_LIBDISK_SUPPORT 806 imply SPL_LIBGENERIC_SUPPORT 807 imply SPL_MMC_SUPPORT if MMC 808 imply SPL_POWER_SUPPORT 809 imply SPL_SERIAL_SUPPORT 810 imply USB_GADGET 811 812config ARCH_VF610 813 bool "Freescale Vybrid" 814 select CPU_V7A 815 select SYS_FSL_ERRATUM_ESDHC111 816 imply CMD_MTDPARTS 817 imply NAND 818 819config ARCH_ZYNQ 820 bool "Xilinx Zynq based platform" 821 select BOARD_LATE_INIT 822 select CPU_V7A 823 select SUPPORT_SPL 824 select OF_CONTROL 825 select SPL_BOARD_INIT if SPL 826 select BOARD_EARLY_INIT_F if WDT 827 select SPL_OF_CONTROL if SPL 828 select DM 829 select DM_ETH if NET 830 select SPL_DM if SPL 831 select DM_MMC if MMC 832 select DM_SPI 833 select DM_SERIAL 834 select DM_SPI_FLASH 835 select SPL_SEPARATE_BSS if SPL 836 select DM_USB if USB 837 select CLK 838 select SPL_CLK if SPL 839 select CLK_ZYNQ 840 select SPI 841 imply CMD_CLK 842 imply FAT_WRITE 843 imply CMD_SPL 844 imply ARCH_EARLY_INIT_R 845 846config ARCH_ZYNQMP_R5 847 bool "Xilinx ZynqMP R5 based platform" 848 select CPU_V7R 849 select OF_CONTROL 850 select DM 851 select DM_SERIAL 852 select CLK 853 854config ARCH_ZYNQMP 855 bool "Xilinx ZynqMP based platform" 856 select ARM64 857 select BOARD_LATE_INIT 858 select DM 859 select OF_CONTROL 860 select DM_SERIAL 861 select SUPPORT_SPL 862 select CLK 863 select SPL_BOARD_INIT if SPL 864 select SPL_CLK if SPL 865 select DM_USB if USB 866 imply FAT_WRITE 867 868config TEGRA 869 bool "NVIDIA Tegra" 870 imply DISTRO_DEFAULTS 871 imply FAT_WRITE 872 873config TARGET_VEXPRESS64_AEMV8A 874 bool "Support vexpress_aemv8a" 875 select ARM64 876 select PL01X_SERIAL 877 878config TARGET_VEXPRESS64_BASE_FVP 879 bool "Support Versatile Express ARMv8a FVP BASE model" 880 select ARM64 881 select SEMIHOSTING 882 select PL01X_SERIAL 883 884config TARGET_VEXPRESS64_BASE_FVP_DRAM 885 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM" 886 select ARM64 887 select PL01X_SERIAL 888 help 889 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides 890 the default config to allow the user to load the images directly into 891 DRAM using model parameters rather than by using semi-hosting to load 892 the files from the host filesystem. 893 894config TARGET_VEXPRESS64_JUNO 895 bool "Support Versatile Express Juno Development Platform" 896 select ARM64 897 select PL01X_SERIAL 898 899config TARGET_LS2080A_EMU 900 bool "Support ls2080a_emu" 901 select ARCH_LS2080A 902 select ARM64 903 select ARMV8_MULTIENTRY 904 select ARCH_MISC_INIT 905 help 906 Support for Freescale LS2080A_EMU platform 907 The LS2080A Development System (EMULATOR) is a pre silicon 908 development platform that supports the QorIQ LS2080A 909 Layerscape Architecture processor. 910 911config TARGET_LS2080A_SIMU 912 bool "Support ls2080a_simu" 913 select ARCH_LS2080A 914 select ARM64 915 select ARMV8_MULTIENTRY 916 select ARCH_MISC_INIT 917 help 918 Support for Freescale LS2080A_SIMU platform 919 The LS2080A Development System (QDS) is a pre silicon 920 development platform that supports the QorIQ LS2080A 921 Layerscape Architecture processor. 922 923config TARGET_LS1088AQDS 924 bool "Support ls1088aqds" 925 select ARCH_LS1088A 926 select ARM64 927 select ARMV8_MULTIENTRY 928 select ARCH_MISC_INIT 929 select BOARD_LATE_INIT 930 select SUPPORT_SPL 931 help 932 Support for NXP LS1088AQDS platform 933 The LS1088A Development System (QDS) is a high-performance 934 development platform that supports the QorIQ LS1088A 935 Layerscape Architecture processor. 936 937config TARGET_LS2080AQDS 938 bool "Support ls2080aqds" 939 select ARCH_LS2080A 940 select ARM64 941 select ARMV8_MULTIENTRY 942 select BOARD_LATE_INIT 943 select SUPPORT_SPL 944 select ARCH_MISC_INIT 945 imply SCSI 946 imply SCSI_AHCI 947 help 948 Support for Freescale LS2080AQDS platform 949 The LS2080A Development System (QDS) is a high-performance 950 development platform that supports the QorIQ LS2080A 951 Layerscape Architecture processor. 952 953config TARGET_LS2080ARDB 954 bool "Support ls2080ardb" 955 select ARCH_LS2080A 956 select ARM64 957 select ARMV8_MULTIENTRY 958 select BOARD_LATE_INIT 959 select SUPPORT_SPL 960 select ARCH_MISC_INIT 961 imply SCSI 962 imply SCSI_AHCI 963 help 964 Support for Freescale LS2080ARDB platform. 965 The LS2080A Reference design board (RDB) is a high-performance 966 development platform that supports the QorIQ LS2080A 967 Layerscape Architecture processor. 968 969config TARGET_LS2081ARDB 970 bool "Support ls2081ardb" 971 select ARCH_LS2080A 972 select ARM64 973 select ARMV8_MULTIENTRY 974 select BOARD_LATE_INIT 975 select SUPPORT_SPL 976 select ARCH_MISC_INIT 977 help 978 Support for Freescale LS2081ARDB platform. 979 The LS2081A Reference design board (RDB) is a high-performance 980 development platform that supports the QorIQ LS2081A/LS2041A 981 Layerscape Architecture processor. 982 983config TARGET_HIKEY 984 bool "Support HiKey 96boards Consumer Edition Platform" 985 select ARM64 986 select DM 987 select DM_GPIO 988 select DM_SERIAL 989 select OF_CONTROL 990 select PL01X_SERIAL 991 select SPECIFY_CONSOLE_INDEX 992 help 993 Support for HiKey 96boards platform. It features a HI6220 994 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM. 995 996config TARGET_POPLAR 997 bool "Support Poplar 96boards Enterprise Edition Platform" 998 select ARM64 999 select DM 1000 select OF_CONTROL 1001 select DM_SERIAL 1002 select DM_USB 1003 select PL01X_SERIAL 1004 help 1005 Support for Poplar 96boards EE platform. It features a HI3798cv200 1006 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU 1007 making it capable of running any commercial set-top solution based on 1008 Linux or Android. 1009 1010config TARGET_LS1012AQDS 1011 bool "Support ls1012aqds" 1012 select ARCH_LS1012A 1013 select ARM64 1014 select BOARD_LATE_INIT 1015 help 1016 Support for Freescale LS1012AQDS platform. 1017 The LS1012A Development System (QDS) is a high-performance 1018 development platform that supports the QorIQ LS1012A 1019 Layerscape Architecture processor. 1020 1021config TARGET_LS1012ARDB 1022 bool "Support ls1012ardb" 1023 select ARCH_LS1012A 1024 select ARM64 1025 select BOARD_LATE_INIT 1026 imply SCSI 1027 imply SCSI_AHCI 1028 help 1029 Support for Freescale LS1012ARDB platform. 1030 The LS1012A Reference design board (RDB) is a high-performance 1031 development platform that supports the QorIQ LS1012A 1032 Layerscape Architecture processor. 1033 1034config TARGET_LS1012A2G5RDB 1035 bool "Support ls1012a2g5rdb" 1036 select ARCH_LS1012A 1037 select ARM64 1038 select BOARD_LATE_INIT 1039 imply SCSI 1040 help 1041 Support for Freescale LS1012A2G5RDB platform. 1042 The LS1012A 2G5 Reference design board (RDB) is a high-performance 1043 development platform that supports the QorIQ LS1012A 1044 Layerscape Architecture processor. 1045 1046config TARGET_LS1012AFRWY 1047 bool "Support ls1012afrwy" 1048 select ARCH_LS1012A 1049 select BOARD_LATE_INIT 1050 select ARM64 1051 imply SCSI 1052 imply SCSI_AHCI 1053 help 1054 Support for Freescale LS1012AFRWY platform. 1055 The LS1012A FRWY board (FRWY) is a high-performance 1056 development platform that supports the QorIQ LS1012A 1057 Layerscape Architecture processor. 1058 1059config TARGET_LS1012AFRDM 1060 bool "Support ls1012afrdm" 1061 select ARCH_LS1012A 1062 select ARM64 1063 help 1064 Support for Freescale LS1012AFRDM platform. 1065 The LS1012A Freedom board (FRDM) is a high-performance 1066 development platform that supports the QorIQ LS1012A 1067 Layerscape Architecture processor. 1068 1069config TARGET_LS1088ARDB 1070 bool "Support ls1088ardb" 1071 select ARCH_LS1088A 1072 select ARM64 1073 select ARMV8_MULTIENTRY 1074 select ARCH_MISC_INIT 1075 select BOARD_LATE_INIT 1076 select SUPPORT_SPL 1077 help 1078 Support for NXP LS1088ARDB platform. 1079 The LS1088A Reference design board (RDB) is a high-performance 1080 development platform that supports the QorIQ LS1088A 1081 Layerscape Architecture processor. 1082 1083config TARGET_LS1021AQDS 1084 bool "Support ls1021aqds" 1085 select BOARD_LATE_INIT 1086 select CPU_V7A 1087 select CPU_V7_HAS_NONSEC 1088 select CPU_V7_HAS_VIRT 1089 select SUPPORT_SPL 1090 select ARCH_LS1021A 1091 select ARCH_SUPPORT_PSCI 1092 select LS1_DEEP_SLEEP 1093 select SYS_FSL_DDR 1094 select BOARD_EARLY_INIT_F 1095 imply SCSI 1096 1097config TARGET_LS1021ATWR 1098 bool "Support ls1021atwr" 1099 select BOARD_LATE_INIT 1100 select CPU_V7A 1101 select CPU_V7_HAS_NONSEC 1102 select CPU_V7_HAS_VIRT 1103 select SUPPORT_SPL 1104 select ARCH_LS1021A 1105 select ARCH_SUPPORT_PSCI 1106 select LS1_DEEP_SLEEP 1107 select BOARD_EARLY_INIT_F 1108 imply SCSI 1109 1110config TARGET_LS1021AIOT 1111 bool "Support ls1021aiot" 1112 select BOARD_LATE_INIT 1113 select CPU_V7A 1114 select CPU_V7_HAS_NONSEC 1115 select CPU_V7_HAS_VIRT 1116 select SUPPORT_SPL 1117 select ARCH_LS1021A 1118 select ARCH_SUPPORT_PSCI 1119 imply SCSI 1120 help 1121 Support for Freescale LS1021AIOT platform. 1122 The LS1021A Freescale board (IOT) is a high-performance 1123 development platform that supports the QorIQ LS1021A 1124 Layerscape Architecture processor. 1125 1126config TARGET_LS1043AQDS 1127 bool "Support ls1043aqds" 1128 select ARCH_LS1043A 1129 select ARM64 1130 select ARMV8_MULTIENTRY 1131 select BOARD_LATE_INIT 1132 select SUPPORT_SPL 1133 select BOARD_EARLY_INIT_F 1134 imply SCSI 1135 help 1136 Support for Freescale LS1043AQDS platform. 1137 1138config TARGET_LS1043ARDB 1139 bool "Support ls1043ardb" 1140 select ARCH_LS1043A 1141 select ARM64 1142 select ARMV8_MULTIENTRY 1143 select BOARD_LATE_INIT 1144 select SUPPORT_SPL 1145 select BOARD_EARLY_INIT_F 1146 imply SCSI 1147 help 1148 Support for Freescale LS1043ARDB platform. 1149 1150config TARGET_LS1046AQDS 1151 bool "Support ls1046aqds" 1152 select ARCH_LS1046A 1153 select ARM64 1154 select ARMV8_MULTIENTRY 1155 select BOARD_LATE_INIT 1156 select SUPPORT_SPL 1157 select DM_SPI_FLASH if DM_SPI 1158 select BOARD_EARLY_INIT_F 1159 imply SCSI 1160 help 1161 Support for Freescale LS1046AQDS platform. 1162 The LS1046A Development System (QDS) is a high-performance 1163 development platform that supports the QorIQ LS1046A 1164 Layerscape Architecture processor. 1165 1166config TARGET_LS1046ARDB 1167 bool "Support ls1046ardb" 1168 select ARCH_LS1046A 1169 select ARM64 1170 select ARMV8_MULTIENTRY 1171 select BOARD_LATE_INIT 1172 select SUPPORT_SPL 1173 select DM_SPI_FLASH if DM_SPI 1174 select POWER_MC34VR500 1175 select BOARD_EARLY_INIT_F 1176 imply SCSI 1177 help 1178 Support for Freescale LS1046ARDB platform. 1179 The LS1046A Reference Design Board (RDB) is a high-performance 1180 development platform that supports the QorIQ LS1046A 1181 Layerscape Architecture processor. 1182 1183config TARGET_H2200 1184 bool "Support h2200" 1185 select CPU_PXA 1186 1187config TARGET_ZIPITZ2 1188 bool "Support zipitz2" 1189 select CPU_PXA 1190 1191config TARGET_COLIBRI_PXA270 1192 bool "Support colibri_pxa270" 1193 select CPU_PXA 1194 1195config ARCH_UNIPHIER 1196 bool "Socionext UniPhier SoCs" 1197 select BOARD_LATE_INIT 1198 select DM 1199 select DM_GPIO 1200 select DM_I2C 1201 select DM_MMC 1202 select DM_RESET 1203 select DM_SERIAL 1204 select DM_USB 1205 select OF_CONTROL 1206 select OF_LIBFDT 1207 select PINCTRL 1208 select SPL_BOARD_INIT if SPL 1209 select SPL_DM if SPL 1210 select SPL_LIBCOMMON_SUPPORT if SPL 1211 select SPL_LIBGENERIC_SUPPORT if SPL 1212 select SPL_OF_CONTROL if SPL 1213 select SPL_PINCTRL if SPL 1214 select SUPPORT_SPL 1215 imply FAT_WRITE 1216 help 1217 Support for UniPhier SoC family developed by Socionext Inc. 1218 (formerly, System LSI Business Division of Panasonic Corporation) 1219 1220config STM32 1221 bool "Support STMicroelectronics STM32 MCU with cortex M" 1222 select CPU_V7M 1223 select DM 1224 select DM_SERIAL 1225 select SYS_THUMB_BUILD 1226 1227config ARCH_STI 1228 bool "Support STMicrolectronics SoCs" 1229 select CPU_V7A 1230 select DM 1231 select DM_SERIAL 1232 select BLK 1233 select DM_MMC 1234 select DM_RESET 1235 help 1236 Support for STMicroelectronics STiH407/10 SoC family. 1237 This SoC is used on Linaro 96Board STiH410-B2260 1238 1239config ARCH_STM32MP 1240 bool "Support STMicroelectronics STM32MP Socs with cortex A" 1241 select ARCH_MISC_INIT 1242 select BOARD_LATE_INIT 1243 select CLK 1244 select DM 1245 select DM_GPIO 1246 select DM_RESET 1247 select DM_SERIAL 1248 select OF_CONTROL 1249 select OF_LIBFDT 1250 select MISC 1251 select PINCTRL 1252 select REGMAP 1253 select SUPPORT_SPL 1254 select SYSCON 1255 select SYSRESET 1256 select SYS_THUMB_BUILD 1257 help 1258 Support for STM32MP SoC family developed by STMicroelectronics, 1259 MPUs based on ARM cortex A core 1260 U-BOOT is running in DDR and SPL support is the unsecure First Stage 1261 BootLoader (FSBL) 1262 1263config ARCH_ROCKCHIP 1264 bool "Support Rockchip SoCs" 1265 select OF_CONTROL 1266 select BLK 1267 select DM 1268 select SPL_DM if SPL 1269 select SYS_MALLOC_F 1270 select SYS_THUMB_BUILD if !ARM64 1271 select SPL_SYS_MALLOC_SIMPLE if SPL 1272 select DM_GPIO 1273 select DM_I2C 1274 select DM_MMC 1275 select DM_SERIAL 1276 select DM_SPI 1277 select DM_SPI_FLASH 1278 select DM_USB if USB 1279 select DM_PWM 1280 select DM_REGULATOR 1281 select ENABLE_ARM_SOC_BOOT0_HOOK 1282 select SPI 1283 imply DISTRO_DEFAULTS 1284 imply FAT_WRITE 1285 imply USB_FUNCTION_FASTBOOT 1286 imply SPL_SYSRESET 1287 imply TPL_SYSRESET 1288 imply ADC 1289 imply SARADC_ROCKCHIP 1290 imply SYS_NS16550 1291 1292config TARGET_THUNDERX_88XX 1293 bool "Support ThunderX 88xx" 1294 select ARM64 1295 select OF_CONTROL 1296 select SYS_CACHE_SHIFT_7 1297 select PL01X_SERIAL 1298 1299config ARCH_ASPEED 1300 bool "Support Aspeed SoCs" 1301 select OF_CONTROL 1302 select DM 1303 1304endchoice 1305 1306config TI_SECURE_DEVICE 1307 bool "HS Device Type Support" 1308 depends on ARCH_KEYSTONE || ARCH_OMAP2PLUS 1309 help 1310 If a high secure (HS) device type is being used, this config 1311 must be set. This option impacts various aspects of the 1312 build system (to create signed boot images that can be 1313 authenticated) and the code. See the doc/README.ti-secure 1314 file for further details. 1315 1316source "arch/arm/mach-aspeed/Kconfig" 1317 1318source "arch/arm/mach-at91/Kconfig" 1319 1320source "arch/arm/mach-bcm283x/Kconfig" 1321 1322source "arch/arm/mach-davinci/Kconfig" 1323 1324source "arch/arm/mach-exynos/Kconfig" 1325 1326source "arch/arm/mach-highbank/Kconfig" 1327 1328source "arch/arm/mach-integrator/Kconfig" 1329 1330source "arch/arm/mach-keystone/Kconfig" 1331 1332source "arch/arm/mach-kirkwood/Kconfig" 1333 1334source "arch/arm/mach-mvebu/Kconfig" 1335 1336source "arch/arm/cpu/armv7/ls102xa/Kconfig" 1337 1338source "arch/arm/mach-imx/mx2/Kconfig" 1339 1340source "arch/arm/mach-imx/mx3/Kconfig" 1341 1342source "arch/arm/mach-imx/mx5/Kconfig" 1343 1344source "arch/arm/mach-imx/mx6/Kconfig" 1345 1346source "arch/arm/mach-imx/mx7/Kconfig" 1347 1348source "arch/arm/mach-imx/mx7ulp/Kconfig" 1349 1350source "arch/arm/mach-imx/mx8m/Kconfig" 1351 1352source "arch/arm/mach-imx/mxs/Kconfig" 1353 1354source "arch/arm/mach-omap2/Kconfig" 1355 1356source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig" 1357 1358source "arch/arm/mach-orion5x/Kconfig" 1359 1360source "arch/arm/mach-rmobile/Kconfig" 1361 1362source "arch/arm/mach-meson/Kconfig" 1363 1364source "arch/arm/mach-qemu/Kconfig" 1365 1366source "arch/arm/mach-rockchip/Kconfig" 1367 1368source "arch/arm/mach-s5pc1xx/Kconfig" 1369 1370source "arch/arm/mach-snapdragon/Kconfig" 1371 1372source "arch/arm/mach-socfpga/Kconfig" 1373 1374source "arch/arm/mach-sti/Kconfig" 1375 1376source "arch/arm/mach-stm32/Kconfig" 1377 1378source "arch/arm/mach-stm32mp/Kconfig" 1379 1380source "arch/arm/mach-sunxi/Kconfig" 1381 1382source "arch/arm/mach-tegra/Kconfig" 1383 1384source "arch/arm/mach-uniphier/Kconfig" 1385 1386source "arch/arm/cpu/armv7/vf610/Kconfig" 1387 1388source "arch/arm/mach-zynq/Kconfig" 1389 1390source "arch/arm/mach-zynqmp-r5/Kconfig" 1391 1392source "arch/arm/cpu/armv7/Kconfig" 1393 1394source "arch/arm/cpu/armv8/zynqmp/Kconfig" 1395 1396source "arch/arm/cpu/armv8/Kconfig" 1397 1398source "arch/arm/mach-imx/Kconfig" 1399 1400source "board/bosch/shc/Kconfig" 1401source "board/CarMediaLab/flea3/Kconfig" 1402source "board/Marvell/aspenite/Kconfig" 1403source "board/Marvell/gplugd/Kconfig" 1404source "board/armadeus/apf27/Kconfig" 1405source "board/armltd/vexpress/Kconfig" 1406source "board/armltd/vexpress64/Kconfig" 1407source "board/broadcom/bcm23550_w1d/Kconfig" 1408source "board/broadcom/bcm28155_ap/Kconfig" 1409source "board/broadcom/bcmcygnus/Kconfig" 1410source "board/broadcom/bcmnsp/Kconfig" 1411source "board/broadcom/bcmns2/Kconfig" 1412source "board/cavium/thunderx/Kconfig" 1413source "board/cirrus/edb93xx/Kconfig" 1414source "board/eets/pdu001/Kconfig" 1415source "board/freescale/ls2080a/Kconfig" 1416source "board/freescale/ls2080aqds/Kconfig" 1417source "board/freescale/ls2080ardb/Kconfig" 1418source "board/freescale/ls1088a/Kconfig" 1419source "board/freescale/ls1021aqds/Kconfig" 1420source "board/freescale/ls1043aqds/Kconfig" 1421source "board/freescale/ls1021atwr/Kconfig" 1422source "board/freescale/ls1021aiot/Kconfig" 1423source "board/freescale/ls1046aqds/Kconfig" 1424source "board/freescale/ls1043ardb/Kconfig" 1425source "board/freescale/ls1046ardb/Kconfig" 1426source "board/freescale/ls1012aqds/Kconfig" 1427source "board/freescale/ls1012ardb/Kconfig" 1428source "board/freescale/ls1012afrdm/Kconfig" 1429source "board/freescale/mx35pdk/Kconfig" 1430source "board/freescale/s32v234evb/Kconfig" 1431source "board/gdsys/a38x/Kconfig" 1432source "board/grinn/chiliboard/Kconfig" 1433source "board/gumstix/pepper/Kconfig" 1434source "board/h2200/Kconfig" 1435source "board/hisilicon/hikey/Kconfig" 1436source "board/hisilicon/poplar/Kconfig" 1437source "board/isee/igep003x/Kconfig" 1438source "board/phytec/pcm051/Kconfig" 1439source "board/silica/pengwyn/Kconfig" 1440source "board/spear/spear300/Kconfig" 1441source "board/spear/spear310/Kconfig" 1442source "board/spear/spear320/Kconfig" 1443source "board/spear/spear600/Kconfig" 1444source "board/spear/x600/Kconfig" 1445source "board/st/stv0991/Kconfig" 1446source "board/tcl/sl50/Kconfig" 1447source "board/birdland/bav335x/Kconfig" 1448source "board/timll/devkit3250/Kconfig" 1449source "board/toradex/colibri_pxa270/Kconfig" 1450source "board/vscom/baltos/Kconfig" 1451source "board/woodburn/Kconfig" 1452source "board/work-microwave/work_92105/Kconfig" 1453source "board/xilinx/zynqmp/Kconfig" 1454source "board/zipitz2/Kconfig" 1455 1456source "arch/arm/Kconfig.debug" 1457 1458endmenu 1459 1460config SPL_LDSCRIPT 1461 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK 1462 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 1463 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 1464 1465 1466