1 /** @file 2 When installed, the MP Services Protocol produces a collection of services 3 that are needed for MP management. 4 5 The MP Services Protocol provides a generalized way of performing following tasks: 6 - Retrieving information of multi-processor environment and MP-related status of 7 specific processors. 8 - Dispatching user-provided function to APs. 9 - Maintain MP-related processor status. 10 11 The MP Services Protocol must be produced on any system with more than one logical 12 processor. 13 14 The Protocol is available only during boot time. 15 16 MP Services Protocol is hardware-independent. Most of the logic of this protocol 17 is architecturally neutral. It abstracts the multi-processor environment and 18 status of processors, and provides interfaces to retrieve information, maintain, 19 and dispatch. 20 21 MP Services Protocol may be consumed by ACPI module. The ACPI module may use this 22 protocol to retrieve data that are needed for an MP platform and report them to OS. 23 MP Services Protocol may also be used to program and configure processors, such 24 as MTRR synchronization for memory space attributes setting in DXE Services. 25 MP Services Protocol may be used by non-CPU DXE drivers to speed up platform boot 26 by taking advantage of the processing capabilities of the APs, for example, using 27 APs to help test system memory in parallel with other device initialization. 28 Diagnostics applications may also use this protocol for multi-processor. 29 30 Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR> 31 This program and the accompanying materials are licensed and made available under 32 the terms and conditions of the BSD License that accompanies this distribution. 33 The full text of the license may be found at 34 http://opensource.org/licenses/bsd-license.php. 35 36 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 37 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 38 39 @par Revision Reference: 40 This Protocol is defined in the UEFI Platform Initialization Specification 1.2, 41 Volume 2:Driver Execution Environment Core Interface. 42 43 **/ 44 45 #ifndef _MP_SERVICE_PROTOCOL_H_ 46 #define _MP_SERVICE_PROTOCOL_H_ 47 48 /// 49 /// Global ID for the EFI_MP_SERVICES_PROTOCOL. 50 /// 51 #define EFI_MP_SERVICES_PROTOCOL_GUID \ 52 { \ 53 0x3fdda605, 0xa76e, 0x4f46, {0xad, 0x29, 0x12, 0xf4, 0x53, 0x1b, 0x3d, 0x08} \ 54 } 55 56 /// 57 /// Forward declaration for the EFI_MP_SERVICES_PROTOCOL. 58 /// 59 typedef struct _EFI_MP_SERVICES_PROTOCOL EFI_MP_SERVICES_PROTOCOL; 60 61 /// 62 /// Terminator for a list of failed CPUs returned by StartAllAPs(). 63 /// 64 #define END_OF_CPU_LIST 0xffffffff 65 66 /// 67 /// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and 68 /// indicates whether the processor is playing the role of BSP. If the bit is 1, 69 /// then the processor is BSP. Otherwise, it is AP. 70 /// 71 #define PROCESSOR_AS_BSP_BIT 0x00000001 72 73 /// 74 /// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and 75 /// indicates whether the processor is enabled. If the bit is 1, then the 76 /// processor is enabled. Otherwise, it is disabled. 77 /// 78 #define PROCESSOR_ENABLED_BIT 0x00000002 79 80 /// 81 /// This bit is used in the StatusFlag field of EFI_PROCESSOR_INFORMATION and 82 /// indicates whether the processor is healthy. If the bit is 1, then the 83 /// processor is healthy. Otherwise, some fault has been detected for the processor. 84 /// 85 #define PROCESSOR_HEALTH_STATUS_BIT 0x00000004 86 87 /// 88 /// Structure that describes the pyhiscal location of a logical CPU. 89 /// 90 typedef struct { 91 /// 92 /// Zero-based physical package number that identifies the cartridge of the processor. 93 /// 94 UINT32 Package; 95 /// 96 /// Zero-based physical core number within package of the processor. 97 /// 98 UINT32 Core; 99 /// 100 /// Zero-based logical thread number within core of the processor. 101 /// 102 UINT32 Thread; 103 } EFI_CPU_PHYSICAL_LOCATION; 104 105 /// 106 /// Structure that describes information about a logical CPU. 107 /// 108 typedef struct { 109 /// 110 /// The unique processor ID determined by system hardware. For IA32 and X64, 111 /// the processor ID is the same as the Local APIC ID. Only the lower 8 bits 112 /// are used, and higher bits are reserved. For IPF, the lower 16 bits contains 113 /// id/eid, and higher bits are reserved. 114 /// 115 UINT64 ProcessorId; 116 /// 117 /// Flags indicating if the processor is BSP or AP, if the processor is enabled 118 /// or disabled, and if the processor is healthy. Bits 3..31 are reserved and 119 /// must be 0. 120 /// 121 /// <pre> 122 /// BSP ENABLED HEALTH Description 123 /// === ======= ====== =================================================== 124 /// 0 0 0 Unhealthy Disabled AP. 125 /// 0 0 1 Healthy Disabled AP. 126 /// 0 1 0 Unhealthy Enabled AP. 127 /// 0 1 1 Healthy Enabled AP. 128 /// 1 0 0 Invalid. The BSP can never be in the disabled state. 129 /// 1 0 1 Invalid. The BSP can never be in the disabled state. 130 /// 1 1 0 Unhealthy Enabled BSP. 131 /// 1 1 1 Healthy Enabled BSP. 132 /// </pre> 133 /// 134 UINT32 StatusFlag; 135 /// 136 /// The physical location of the processor, including the physical package number 137 /// that identifies the cartridge, the physical core number within package, and 138 /// logical thread number within core. 139 /// 140 EFI_CPU_PHYSICAL_LOCATION Location; 141 } EFI_PROCESSOR_INFORMATION; 142 143 /** 144 This service retrieves the number of logical processor in the platform 145 and the number of those logical processors that are enabled on this boot. 146 This service may only be called from the BSP. 147 148 This function is used to retrieve the following information: 149 - The number of logical processors that are present in the system. 150 - The number of enabled logical processors in the system at the instant 151 this call is made. 152 153 Because MP Service Protocol provides services to enable and disable processors 154 dynamically, the number of enabled logical processors may vary during the 155 course of a boot session. 156 157 If this service is called from an AP, then EFI_DEVICE_ERROR is returned. 158 If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then 159 EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors 160 is returned in NumberOfProcessors, the number of currently enabled processor 161 is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned. 162 163 @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL 164 instance. 165 @param[out] NumberOfProcessors Pointer to the total number of logical 166 processors in the system, including the BSP 167 and disabled APs. 168 @param[out] NumberOfEnabledProcessors Pointer to the number of enabled logical 169 processors that exist in system, including 170 the BSP. 171 172 @retval EFI_SUCCESS The number of logical processors and enabled 173 logical processors was retrieved. 174 @retval EFI_DEVICE_ERROR The calling processor is an AP. 175 @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL. 176 @retval EFI_INVALID_PARAMETER NumberOfEnabledProcessors is NULL. 177 178 **/ 179 typedef 180 EFI_STATUS 181 (EFIAPI *EFI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS)( 182 IN EFI_MP_SERVICES_PROTOCOL *This, 183 OUT UINTN *NumberOfProcessors, 184 OUT UINTN *NumberOfEnabledProcessors 185 ); 186 187 /** 188 Gets detailed MP-related information on the requested processor at the 189 instant this call is made. This service may only be called from the BSP. 190 191 This service retrieves detailed MP-related information about any processor 192 on the platform. Note the following: 193 - The processor information may change during the course of a boot session. 194 - The information presented here is entirely MP related. 195 196 Information regarding the number of caches and their sizes, frequency of operation, 197 slot numbers is all considered platform-related information and is not provided 198 by this service. 199 200 @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL 201 instance. 202 @param[in] ProcessorNumber The handle number of processor. 203 @param[out] ProcessorInfoBuffer A pointer to the buffer where information for 204 the requested processor is deposited. 205 206 @retval EFI_SUCCESS Processor information was returned. 207 @retval EFI_DEVICE_ERROR The calling processor is an AP. 208 @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL. 209 @retval EFI_NOT_FOUND The processor with the handle specified by 210 ProcessorNumber does not exist in the platform. 211 212 **/ 213 typedef 214 EFI_STATUS 215 (EFIAPI *EFI_MP_SERVICES_GET_PROCESSOR_INFO)( 216 IN EFI_MP_SERVICES_PROTOCOL *This, 217 IN UINTN ProcessorNumber, 218 OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer 219 ); 220 221 /** 222 This service executes a caller provided function on all enabled APs. APs can 223 run either simultaneously or one at a time in sequence. This service supports 224 both blocking and non-blocking requests. The non-blocking requests use EFI 225 events so the BSP can detect when the APs have finished. This service may only 226 be called from the BSP. 227 228 This function is used to dispatch all the enabled APs to the function specified 229 by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned 230 immediately and Procedure is not started on any AP. 231 232 If SingleThread is TRUE, all the enabled APs execute the function specified by 233 Procedure one by one, in ascending order of processor handle number. Otherwise, 234 all the enabled APs execute the function specified by Procedure simultaneously. 235 236 If WaitEvent is NULL, execution is in blocking mode. The BSP waits until all 237 APs finish or TimeoutInMicroSecs expires. Otherwise, execution is in non-blocking 238 mode, and the BSP returns from this service without waiting for APs. If a 239 non-blocking mode is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT 240 is signaled, then EFI_UNSUPPORTED must be returned. 241 242 If the timeout specified by TimeoutInMicroseconds expires before all APs return 243 from Procedure, then Procedure on the failed APs is terminated. All enabled APs 244 are always available for further calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() 245 and EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). If FailedCpuList is not NULL, its 246 content points to the list of processor handle numbers in which Procedure was 247 terminated. 248 249 Note: It is the responsibility of the consumer of the EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() 250 to make sure that the nature of the code that is executed on the BSP and the 251 dispatched APs is well controlled. The MP Services Protocol does not guarantee 252 that the Procedure function is MP-safe. Hence, the tasks that can be run in 253 parallel are limited to certain independent tasks and well-controlled exclusive 254 code. EFI services and protocols may not be called by APs unless otherwise 255 specified. 256 257 In blocking execution mode, BSP waits until all APs finish or 258 TimeoutInMicroSeconds expires. 259 260 In non-blocking execution mode, BSP is freed to return to the caller and then 261 proceed to the next task without having to wait for APs. The following 262 sequence needs to occur in a non-blocking execution mode: 263 264 -# The caller that intends to use this MP Services Protocol in non-blocking 265 mode creates WaitEvent by calling the EFI CreateEvent() service. The caller 266 invokes EFI_MP_SERVICES_PROTOCOL.StartupAllAPs(). If the parameter WaitEvent 267 is not NULL, then StartupAllAPs() executes in non-blocking mode. It requests 268 the function specified by Procedure to be started on all the enabled APs, 269 and releases the BSP to continue with other tasks. 270 -# The caller can use the CheckEvent() and WaitForEvent() services to check 271 the state of the WaitEvent created in step 1. 272 -# When the APs complete their task or TimeoutInMicroSecondss expires, the MP 273 Service signals WaitEvent by calling the EFI SignalEvent() function. If 274 FailedCpuList is not NULL, its content is available when WaitEvent is 275 signaled. If all APs returned from Procedure prior to the timeout, then 276 FailedCpuList is set to NULL. If not all APs return from Procedure before 277 the timeout, then FailedCpuList is filled in with the list of the failed 278 APs. The buffer is allocated by MP Service Protocol using AllocatePool(). 279 It is the caller's responsibility to free the buffer with FreePool() service. 280 -# This invocation of SignalEvent() function informs the caller that invoked 281 EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() that either all the APs completed 282 the specified task or a timeout occurred. The contents of FailedCpuList 283 can be examined to determine which APs did not complete the specified task 284 prior to the timeout. 285 286 @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL 287 instance. 288 @param[in] Procedure A pointer to the function to be run on 289 enabled APs of the system. See type 290 EFI_AP_PROCEDURE. 291 @param[in] SingleThread If TRUE, then all the enabled APs execute 292 the function specified by Procedure one by 293 one, in ascending order of processor handle 294 number. If FALSE, then all the enabled APs 295 execute the function specified by Procedure 296 simultaneously. 297 @param[in] WaitEvent The event created by the caller with CreateEvent() 298 service. If it is NULL, then execute in 299 blocking mode. BSP waits until all APs finish 300 or TimeoutInMicroSeconds expires. If it's 301 not NULL, then execute in non-blocking mode. 302 BSP requests the function specified by 303 Procedure to be started on all the enabled 304 APs, and go on executing immediately. If 305 all return from Procedure, or TimeoutInMicroSeconds 306 expires, this event is signaled. The BSP 307 can use the CheckEvent() or WaitForEvent() 308 services to check the state of event. Type 309 EFI_EVENT is defined in CreateEvent() in 310 the Unified Extensible Firmware Interface 311 Specification. 312 @param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for 313 APs to return from Procedure, either for 314 blocking or non-blocking mode. Zero means 315 infinity. If the timeout expires before 316 all APs return from Procedure, then Procedure 317 on the failed APs is terminated. All enabled 318 APs are available for next function assigned 319 by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() 320 or EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). 321 If the timeout expires in blocking mode, 322 BSP returns EFI_TIMEOUT. If the timeout 323 expires in non-blocking mode, WaitEvent 324 is signaled with SignalEvent(). 325 @param[in] ProcedureArgument The parameter passed into Procedure for 326 all APs. 327 @param[out] FailedCpuList If NULL, this parameter is ignored. Otherwise, 328 if all APs finish successfully, then its 329 content is set to NULL. If not all APs 330 finish before timeout expires, then its 331 content is set to address of the buffer 332 holding handle numbers of the failed APs. 333 The buffer is allocated by MP Service Protocol, 334 and it's the caller's responsibility to 335 free the buffer with FreePool() service. 336 In blocking mode, it is ready for consumption 337 when the call returns. In non-blocking mode, 338 it is ready when WaitEvent is signaled. The 339 list of failed CPU is terminated by 340 END_OF_CPU_LIST. 341 342 @retval EFI_SUCCESS In blocking mode, all APs have finished before 343 the timeout expired. 344 @retval EFI_SUCCESS In non-blocking mode, function has been dispatched 345 to all enabled APs. 346 @retval EFI_UNSUPPORTED A non-blocking mode request was made after the 347 UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was 348 signaled. 349 @retval EFI_DEVICE_ERROR Caller processor is AP. 350 @retval EFI_NOT_STARTED No enabled APs exist in the system. 351 @retval EFI_NOT_READY Any enabled APs are busy. 352 @retval EFI_TIMEOUT In blocking mode, the timeout expired before 353 all enabled APs have finished. 354 @retval EFI_INVALID_PARAMETER Procedure is NULL. 355 356 **/ 357 typedef 358 EFI_STATUS 359 (EFIAPI *EFI_MP_SERVICES_STARTUP_ALL_APS)( 360 IN EFI_MP_SERVICES_PROTOCOL *This, 361 IN EFI_AP_PROCEDURE Procedure, 362 IN BOOLEAN SingleThread, 363 IN EFI_EVENT WaitEvent OPTIONAL, 364 IN UINTN TimeoutInMicroSeconds, 365 IN VOID *ProcedureArgument OPTIONAL, 366 OUT UINTN **FailedCpuList OPTIONAL 367 ); 368 369 /** 370 This service lets the caller get one enabled AP to execute a caller-provided 371 function. The caller can request the BSP to either wait for the completion 372 of the AP or just proceed with the next task by using the EFI event mechanism. 373 See EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() for more details on non-blocking 374 execution support. This service may only be called from the BSP. 375 376 This function is used to dispatch one enabled AP to the function specified by 377 Procedure passing in the argument specified by ProcedureArgument. If WaitEvent 378 is NULL, execution is in blocking mode. The BSP waits until the AP finishes or 379 TimeoutInMicroSecondss expires. Otherwise, execution is in non-blocking mode. 380 BSP proceeds to the next task without waiting for the AP. If a non-blocking mode 381 is requested after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, 382 then EFI_UNSUPPORTED must be returned. 383 384 If the timeout specified by TimeoutInMicroseconds expires before the AP returns 385 from Procedure, then execution of Procedure by the AP is terminated. The AP is 386 available for subsequent calls to EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() and 387 EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). 388 389 @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL 390 instance. 391 @param[in] Procedure A pointer to the function to be run on the 392 designated AP of the system. See type 393 EFI_AP_PROCEDURE. 394 @param[in] ProcessorNumber The handle number of the AP. The range is 395 from 0 to the total number of logical 396 processors minus 1. The total number of 397 logical processors can be retrieved by 398 EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). 399 @param[in] WaitEvent The event created by the caller with CreateEvent() 400 service. If it is NULL, then execute in 401 blocking mode. BSP waits until this AP finish 402 or TimeoutInMicroSeconds expires. If it's 403 not NULL, then execute in non-blocking mode. 404 BSP requests the function specified by 405 Procedure to be started on this AP, 406 and go on executing immediately. If this AP 407 return from Procedure or TimeoutInMicroSeconds 408 expires, this event is signaled. The BSP 409 can use the CheckEvent() or WaitForEvent() 410 services to check the state of event. Type 411 EFI_EVENT is defined in CreateEvent() in 412 the Unified Extensible Firmware Interface 413 Specification. 414 @param[in] TimeoutInMicrosecsond Indicates the time limit in microseconds for 415 this AP to finish this Procedure, either for 416 blocking or non-blocking mode. Zero means 417 infinity. If the timeout expires before 418 this AP returns from Procedure, then Procedure 419 on the AP is terminated. The 420 AP is available for next function assigned 421 by EFI_MP_SERVICES_PROTOCOL.StartupAllAPs() 422 or EFI_MP_SERVICES_PROTOCOL.StartupThisAP(). 423 If the timeout expires in blocking mode, 424 BSP returns EFI_TIMEOUT. If the timeout 425 expires in non-blocking mode, WaitEvent 426 is signaled with SignalEvent(). 427 @param[in] ProcedureArgument The parameter passed into Procedure on the 428 specified AP. 429 @param[out] Finished If NULL, this parameter is ignored. In 430 blocking mode, this parameter is ignored. 431 In non-blocking mode, if AP returns from 432 Procedure before the timeout expires, its 433 content is set to TRUE. Otherwise, the 434 value is set to FALSE. The caller can 435 determine if the AP returned from Procedure 436 by evaluating this value. 437 438 @retval EFI_SUCCESS In blocking mode, specified AP finished before 439 the timeout expires. 440 @retval EFI_SUCCESS In non-blocking mode, the function has been 441 dispatched to specified AP. 442 @retval EFI_UNSUPPORTED A non-blocking mode request was made after the 443 UEFI event EFI_EVENT_GROUP_READY_TO_BOOT was 444 signaled. 445 @retval EFI_DEVICE_ERROR The calling processor is an AP. 446 @retval EFI_TIMEOUT In blocking mode, the timeout expired before 447 the specified AP has finished. 448 @retval EFI_NOT_READY The specified AP is busy. 449 @retval EFI_NOT_FOUND The processor with the handle specified by 450 ProcessorNumber does not exist. 451 @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP. 452 @retval EFI_INVALID_PARAMETER Procedure is NULL. 453 454 **/ 455 typedef 456 EFI_STATUS 457 (EFIAPI *EFI_MP_SERVICES_STARTUP_THIS_AP)( 458 IN EFI_MP_SERVICES_PROTOCOL *This, 459 IN EFI_AP_PROCEDURE Procedure, 460 IN UINTN ProcessorNumber, 461 IN EFI_EVENT WaitEvent OPTIONAL, 462 IN UINTN TimeoutInMicroseconds, 463 IN VOID *ProcedureArgument OPTIONAL, 464 OUT BOOLEAN *Finished OPTIONAL 465 ); 466 467 /** 468 This service switches the requested AP to be the BSP from that point onward. 469 This service changes the BSP for all purposes. This call can only be performed 470 by the current BSP. 471 472 This service switches the requested AP to be the BSP from that point onward. 473 This service changes the BSP for all purposes. The new BSP can take over the 474 execution of the old BSP and continue seamlessly from where the old one left 475 off. This service may not be supported after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT 476 is signaled. 477 478 If the BSP cannot be switched prior to the return from this service, then 479 EFI_UNSUPPORTED must be returned. 480 481 @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance. 482 @param[in] ProcessorNumber The handle number of AP that is to become the new 483 BSP. The range is from 0 to the total number of 484 logical processors minus 1. The total number of 485 logical processors can be retrieved by 486 EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). 487 @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an 488 enabled AP. Otherwise, it will be disabled. 489 490 @retval EFI_SUCCESS BSP successfully switched. 491 @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to 492 this service returning. 493 @retval EFI_UNSUPPORTED Switching the BSP is not supported. 494 @retval EFI_SUCCESS The calling processor is an AP. 495 @retval EFI_NOT_FOUND The processor with the handle specified by 496 ProcessorNumber does not exist. 497 @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or 498 a disabled AP. 499 @retval EFI_NOT_READY The specified AP is busy. 500 501 **/ 502 typedef 503 EFI_STATUS 504 (EFIAPI *EFI_MP_SERVICES_SWITCH_BSP)( 505 IN EFI_MP_SERVICES_PROTOCOL *This, 506 IN UINTN ProcessorNumber, 507 IN BOOLEAN EnableOldBSP 508 ); 509 510 /** 511 This service lets the caller enable or disable an AP from this point onward. 512 This service may only be called from the BSP. 513 514 This service allows the caller enable or disable an AP from this point onward. 515 The caller can optionally specify the health status of the AP by Health. If 516 an AP is being disabled, then the state of the disabled AP is implementation 517 dependent. If an AP is enabled, then the implementation must guarantee that a 518 complete initialization sequence is performed on the AP, so the AP is in a state 519 that is compatible with an MP operating system. This service may not be supported 520 after the UEFI Event EFI_EVENT_GROUP_READY_TO_BOOT is signaled. 521 522 If the enable or disable AP operation cannot be completed prior to the return 523 from this service, then EFI_UNSUPPORTED must be returned. 524 525 @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance. 526 @param[in] ProcessorNumber The handle number of AP. 527 The range is from 0 to the total number of 528 logical processors minus 1. The total number of 529 logical processors can be retrieved by 530 EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). 531 @param[in] EnableAP Specifies the new state for the processor for 532 enabled, FALSE for disabled. 533 @param[in] HealthFlag If not NULL, a pointer to a value that specifies 534 the new health status of the AP. This flag 535 corresponds to StatusFlag defined in 536 EFI_MP_SERVICES_PROTOCOL.GetProcessorInfo(). Only 537 the PROCESSOR_HEALTH_STATUS_BIT is used. All other 538 bits are ignored. If it is NULL, this parameter 539 is ignored. 540 541 @retval EFI_SUCCESS The specified AP was enabled or disabled successfully. 542 @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed 543 prior to this service returning. 544 @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported. 545 @retval EFI_DEVICE_ERROR The calling processor is an AP. 546 @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber 547 does not exist. 548 @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP. 549 550 **/ 551 typedef 552 EFI_STATUS 553 (EFIAPI *EFI_MP_SERVICES_ENABLEDISABLEAP)( 554 IN EFI_MP_SERVICES_PROTOCOL *This, 555 IN UINTN ProcessorNumber, 556 IN BOOLEAN EnableAP, 557 IN UINT32 *HealthFlag OPTIONAL 558 ); 559 560 /** 561 This return the handle number for the calling processor. This service may be 562 called from the BSP and APs. 563 564 This service returns the processor handle number for the calling processor. 565 The returned value is in the range from 0 to the total number of logical 566 processors minus 1. The total number of logical processors can be retrieved 567 with EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). This service may be 568 called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER 569 is returned. Otherwise, the current processors handle number is returned in 570 ProcessorNumber, and EFI_SUCCESS is returned. 571 572 @param[in] This A pointer to the EFI_MP_SERVICES_PROTOCOL instance. 573 @param[in] ProcessorNumber Pointer to the handle number of AP. 574 The range is from 0 to the total number of 575 logical processors minus 1. The total number of 576 logical processors can be retrieved by 577 EFI_MP_SERVICES_PROTOCOL.GetNumberOfProcessors(). 578 579 @retval EFI_SUCCESS The current processor handle number was returned 580 in ProcessorNumber. 581 @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL. 582 583 **/ 584 typedef 585 EFI_STATUS 586 (EFIAPI *EFI_MP_SERVICES_WHOAMI)( 587 IN EFI_MP_SERVICES_PROTOCOL *This, 588 OUT UINTN *ProcessorNumber 589 ); 590 591 /// 592 /// When installed, the MP Services Protocol produces a collection of services 593 /// that are needed for MP management. 594 /// 595 /// Before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, the module 596 /// that produces this protocol is required to place all APs into an idle state 597 /// whenever the APs are disabled or the APs are not executing code as requested 598 /// through the StartupAllAPs() or StartupThisAP() services. The idle state of 599 /// an AP before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled is 600 /// implementation dependent. 601 /// 602 /// After the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, all the APs 603 /// must be placed in the OS compatible CPU state as defined by the UEFI 604 /// Specification. Implementations of this protocol may use the UEFI event 605 /// EFI_EVENT_GROUP_READY_TO_BOOT to force APs into the OS compatible state as 606 /// defined by the UEFI Specification. Modules that use this protocol must 607 /// guarantee that all non-blocking mode requests on all APs have been completed 608 /// before the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled. Since the 609 /// order that event notification functions in the same event group are executed 610 /// is not deterministic, an event of type EFI_EVENT_GROUP_READY_TO_BOOT cannot 611 /// be used to guarantee that APs have completed their non-blocking mode requests. 612 /// 613 /// When the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, the StartAllAPs() 614 /// and StartupThisAp() services must no longer support non-blocking mode requests. 615 /// The support for SwitchBSP() and EnableDisableAP() may no longer be supported 616 /// after this event is signaled. Since UEFI Applications and UEFI OS Loaders 617 /// execute after the UEFI event EFI_EVENT_GROUP_READY_TO_BOOT is signaled, these 618 /// UEFI images must be aware that the functionality of this protocol may be reduced. 619 /// 620 struct _EFI_MP_SERVICES_PROTOCOL { 621 EFI_MP_SERVICES_GET_NUMBER_OF_PROCESSORS GetNumberOfProcessors; 622 EFI_MP_SERVICES_GET_PROCESSOR_INFO GetProcessorInfo; 623 EFI_MP_SERVICES_STARTUP_ALL_APS StartupAllAPs; 624 EFI_MP_SERVICES_STARTUP_THIS_AP StartupThisAP; 625 EFI_MP_SERVICES_SWITCH_BSP SwitchBSP; 626 EFI_MP_SERVICES_ENABLEDISABLEAP EnableDisableAP; 627 EFI_MP_SERVICES_WHOAMI WhoAmI; 628 }; 629 630 extern EFI_GUID gEfiMpServiceProtocolGuid; 631 632 #endif 633