1 /** @file 2 Provides services to load and relocate a PE/COFF image. 3 4 The PE/COFF Loader Library abstracts the implementation of a PE/COFF loader for 5 IA-32, x86, IPF, and EBC processor types. The library functions are memory-based 6 and can be ported easily to any environment. 7 8 Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR> 9 This program and the accompanying materials are licensed and made available under 10 the terms and conditions of the BSD License that accompanies this distribution. 11 The full text of the license may be found at 12 http://opensource.org/licenses/bsd-license.php. 13 14 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 15 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 16 17 **/ 18 19 #ifndef __BASE_PE_COFF_LIB_H__ 20 #define __BASE_PE_COFF_LIB_H__ 21 22 #include <IndustryStandard/PeImage.h> 23 // 24 // Return status codes from the PE/COFF Loader services 25 // 26 #define IMAGE_ERROR_SUCCESS 0 27 #define IMAGE_ERROR_IMAGE_READ 1 28 #define IMAGE_ERROR_INVALID_PE_HEADER_SIGNATURE 2 29 #define IMAGE_ERROR_INVALID_MACHINE_TYPE 3 30 #define IMAGE_ERROR_INVALID_SUBSYSTEM 4 31 #define IMAGE_ERROR_INVALID_IMAGE_ADDRESS 5 32 #define IMAGE_ERROR_INVALID_IMAGE_SIZE 6 33 #define IMAGE_ERROR_INVALID_SECTION_ALIGNMENT 7 34 #define IMAGE_ERROR_SECTION_NOT_LOADED 8 35 #define IMAGE_ERROR_FAILED_RELOCATION 9 36 #define IMAGE_ERROR_FAILED_ICACHE_FLUSH 10 37 #define IMAGE_ERROR_UNSUPPORTED 11 38 39 /** 40 Reads contents of a PE/COFF image. 41 42 A function of this type reads contents of the PE/COFF image specified by FileHandle. The read 43 operation copies ReadSize bytes from the PE/COFF image starting at byte offset FileOffset into 44 the buffer specified by Buffer. The size of the buffer actually read is returned in ReadSize. 45 If FileOffset specifies an offset past the end of the PE/COFF image, a ReadSize of 0 is returned. 46 A function of this type must be registered in the ImageRead field of a PE_COFF_LOADER_IMAGE_CONTEXT 47 structure for the PE/COFF Loader Library service to function correctly. This function abstracts access 48 to a PE/COFF image so it can be implemented in an environment specific manner. For example, SEC and PEI 49 environments may access memory directly to read the contents of a PE/COFF image, and DXE or UEFI 50 environments may require protocol services to read the contents of PE/COFF image 51 stored on FLASH, disk, or network devices. 52 53 If FileHandle is not a valid handle, then ASSERT(). 54 If ReadSize is NULL, then ASSERT(). 55 If Buffer is NULL, then ASSERT(). 56 57 @param FileHandle Pointer to the file handle to read the PE/COFF image. 58 @param FileOffset Offset into the PE/COFF image to begin the read operation. 59 @param ReadSize On input, the size in bytes of the requested read operation. 60 On output, the number of bytes actually read. 61 @param Buffer Output buffer that contains the data read from the PE/COFF image. 62 63 @retval RETURN_SUCCESS The specified portion of the PE/COFF image was 64 read and the size return in ReadSize. 65 @retval RETURN_DEVICE_ERROR The specified portion of the PE/COFF image 66 could not be read due to a device error. 67 68 **/ 69 typedef 70 RETURN_STATUS 71 (EFIAPI *PE_COFF_LOADER_READ_FILE)( 72 IN VOID *FileHandle, 73 IN UINTN FileOffset, 74 IN OUT UINTN *ReadSize, 75 OUT VOID *Buffer 76 ); 77 78 /// 79 /// The context structure used while PE/COFF image is being loaded and relocated. 80 /// 81 typedef struct { 82 /// 83 /// Set by PeCoffLoaderGetImageInfo() to the ImageBase in the PE/COFF header. 84 /// 85 PHYSICAL_ADDRESS ImageAddress; 86 /// 87 /// Set by PeCoffLoaderGetImageInfo() to the SizeOfImage in the PE/COFF header. 88 /// Image size includes the size of Debug Entry if it is present. 89 /// 90 UINT64 ImageSize; 91 /// 92 /// Is set to zero by PeCoffLoaderGetImageInfo(). If DestinationAddress is non-zero, 93 /// PeCoffLoaderRelocateImage() will relocate the image using this base address. 94 /// If the DestinationAddress is zero, the ImageAddress will be used as the base 95 /// address of relocation. 96 /// 97 PHYSICAL_ADDRESS DestinationAddress; 98 /// 99 /// PeCoffLoaderLoadImage() sets EntryPoint to to the entry point of the PE/COFF image. 100 /// 101 PHYSICAL_ADDRESS EntryPoint; 102 /// 103 /// Passed in by the caller to PeCoffLoaderGetImageInfo() and PeCoffLoaderLoadImage() 104 /// to abstract accessing the image from the library. 105 /// 106 PE_COFF_LOADER_READ_FILE ImageRead; 107 /// 108 /// Used as the FileHandle passed into the ImageRead function when it's called. 109 /// 110 VOID *Handle; 111 /// 112 /// Caller allocated buffer of size FixupDataSize that can be optionally allocated 113 /// prior to calling PeCoffLoaderRelocateImage(). 114 /// This buffer is filled with the information used to fix up the image. 115 /// The fixups have been applied to the image and this entry is just for information. 116 /// 117 VOID *FixupData; 118 /// 119 /// Set by PeCoffLoaderGetImageInfo() to the Section Alignment in the PE/COFF header. 120 /// If the image is a TE image, then this field is set to 0. 121 /// 122 UINT32 SectionAlignment; 123 /// 124 /// Set by PeCoffLoaderGetImageInfo() to offset to the PE/COFF header. 125 /// If the PE/COFF image does not start with a DOS header, this value is zero. 126 /// Otherwise, it's the offset to the PE/COFF header. 127 /// 128 UINT32 PeCoffHeaderOffset; 129 /// 130 /// Set by PeCoffLoaderGetImageInfo() to the Relative Virtual Address of the debug directory, 131 /// if it exists in the image 132 /// 133 UINT32 DebugDirectoryEntryRva; 134 /// 135 /// Set by PeCoffLoaderLoadImage() to CodeView area of the PE/COFF Debug directory. 136 /// 137 VOID *CodeView; 138 /// 139 /// Set by PeCoffLoaderLoadImage() to point to the PDB entry contained in the CodeView area. 140 /// The PdbPointer points to the filename of the PDB file used for source-level debug of 141 /// the image by a debugger. 142 /// 143 CHAR8 *PdbPointer; 144 /// 145 /// Is set by PeCoffLoaderGetImageInfo() to the Section Alignment in the PE/COFF header. 146 /// 147 UINTN SizeOfHeaders; 148 /// 149 /// Not used by this library class. Other library classes that layer on top of this library 150 /// class fill in this value as part of their GetImageInfo call. 151 /// This allows the caller of the library to know what type of memory needs to be allocated 152 /// to load and relocate the image. 153 /// 154 UINT32 ImageCodeMemoryType; 155 /// 156 /// Not used by this library class. Other library classes that layer on top of this library 157 /// class fill in this value as part of their GetImageInfo call. 158 /// This allows the caller of the library to know what type of memory needs to be allocated 159 /// to load and relocate the image. 160 /// 161 UINT32 ImageDataMemoryType; 162 /// 163 /// Set by any of the library functions if they encounter an error. 164 /// 165 UINT32 ImageError; 166 /// 167 /// Set by PeCoffLoaderLoadImage() to indicate the size of FixupData that the caller must 168 /// allocate before calling PeCoffLoaderRelocateImage(). 169 /// 170 UINTN FixupDataSize; 171 /// 172 /// Set by PeCoffLoaderGetImageInfo() to the machine type stored in the PE/COFF header. 173 /// 174 UINT16 Machine; 175 /// 176 /// Set by PeCoffLoaderGetImageInfo() to the subsystem type stored in the PE/COFF header. 177 /// 178 UINT16 ImageType; 179 /// 180 /// Set by PeCoffLoaderGetImageInfo() to TRUE if the PE/COFF image does not contain 181 /// relocation information. 182 /// 183 BOOLEAN RelocationsStripped; 184 /// 185 /// Set by PeCoffLoaderGetImageInfo() to TRUE if the image is a TE image. 186 /// For a definition of the TE Image format, see the Platform Initialization Pre-EFI 187 /// Initialization Core Interface Specification. 188 /// 189 BOOLEAN IsTeImage; 190 /// 191 /// Set by PeCoffLoaderLoadImage() to the HII resource offset 192 /// if the image contains a custom PE/COFF resource with the type 'HII'. 193 /// Otherwise, the entry remains to be 0. 194 /// 195 PHYSICAL_ADDRESS HiiResourceData; 196 /// 197 /// Private storage for implementation specific data. 198 /// 199 UINT64 Context; 200 } PE_COFF_LOADER_IMAGE_CONTEXT; 201 202 /** 203 Retrieves information about a PE/COFF image. 204 205 Computes the PeCoffHeaderOffset, IsTeImage, ImageType, ImageAddress, ImageSize, 206 DestinationAddress, RelocationsStripped, SectionAlignment, SizeOfHeaders, and 207 DebugDirectoryEntryRva fields of the ImageContext structure. 208 If ImageContext is NULL, then return RETURN_INVALID_PARAMETER. 209 If the PE/COFF image accessed through the ImageRead service in the ImageContext 210 structure is not a supported PE/COFF image type, then return RETURN_UNSUPPORTED. 211 If any errors occur while computing the fields of ImageContext, 212 then the error status is returned in the ImageError field of ImageContext. 213 If the image is a TE image, then SectionAlignment is set to 0. 214 The ImageRead and Handle fields of ImageContext structure must be valid prior 215 to invoking this service. 216 217 @param ImageContext The pointer to the image context structure that 218 describes the PE/COFF image that needs to be 219 examined by this function. 220 221 @retval RETURN_SUCCESS The information on the PE/COFF image was collected. 222 @retval RETURN_INVALID_PARAMETER ImageContext is NULL. 223 @retval RETURN_UNSUPPORTED The PE/COFF image is not supported. 224 225 **/ 226 RETURN_STATUS 227 EFIAPI 228 PeCoffLoaderGetImageInfo ( 229 IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext 230 ); 231 232 /** 233 Applies relocation fixups to a PE/COFF image that was loaded with PeCoffLoaderLoadImage(). 234 235 If the DestinationAddress field of ImageContext is 0, then use the ImageAddress field of 236 ImageContext as the relocation base address. Otherwise, use the DestinationAddress field 237 of ImageContext as the relocation base address. The caller must allocate the relocation 238 fixup log buffer and fill in the FixupData field of ImageContext prior to calling this function. 239 240 The ImageRead, Handle, PeCoffHeaderOffset, IsTeImage, Machine, ImageType, ImageAddress, 241 ImageSize, DestinationAddress, RelocationsStripped, SectionAlignment, SizeOfHeaders, 242 DebugDirectoryEntryRva, EntryPoint, FixupDataSize, CodeView, PdbPointer, and FixupData of 243 the ImageContext structure must be valid prior to invoking this service. 244 245 If ImageContext is NULL, then ASSERT(). 246 247 Note that if the platform does not maintain coherency between the instruction cache(s) and the data 248 cache(s) in hardware, then the caller is responsible for performing cache maintenance operations 249 prior to transferring control to a PE/COFF image that is loaded using this library. 250 251 @param ImageContext The pointer to the image context structure that describes the PE/COFF 252 image that is being relocated. 253 254 @retval RETURN_SUCCESS The PE/COFF image was relocated. 255 Extended status information is in the ImageError field of ImageContext. 256 @retval RETURN_LOAD_ERROR The image in not a valid PE/COFF image. 257 Extended status information is in the ImageError field of ImageContext. 258 @retval RETURN_UNSUPPORTED A relocation record type is not supported. 259 Extended status information is in the ImageError field of ImageContext. 260 261 **/ 262 RETURN_STATUS 263 EFIAPI 264 PeCoffLoaderRelocateImage ( 265 IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext 266 ); 267 268 /** 269 Loads a PE/COFF image into memory. 270 271 Loads the PE/COFF image accessed through the ImageRead service of ImageContext into the buffer 272 specified by the ImageAddress and ImageSize fields of ImageContext. The caller must allocate 273 the load buffer and fill in the ImageAddress and ImageSize fields prior to calling this function. 274 The EntryPoint, FixupDataSize, CodeView, PdbPointer and HiiResourceData fields of ImageContext are computed. 275 The ImageRead, Handle, PeCoffHeaderOffset, IsTeImage, Machine, ImageType, ImageAddress, ImageSize, 276 DestinationAddress, RelocationsStripped, SectionAlignment, SizeOfHeaders, and DebugDirectoryEntryRva 277 fields of the ImageContext structure must be valid prior to invoking this service. 278 279 If ImageContext is NULL, then ASSERT(). 280 281 Note that if the platform does not maintain coherency between the instruction cache(s) and the data 282 cache(s) in hardware, then the caller is responsible for performing cache maintenance operations 283 prior to transferring control to a PE/COFF image that is loaded using this library. 284 285 @param ImageContext The pointer to the image context structure that describes the PE/COFF 286 image that is being loaded. 287 288 @retval RETURN_SUCCESS The PE/COFF image was loaded into the buffer specified by 289 the ImageAddress and ImageSize fields of ImageContext. 290 Extended status information is in the ImageError field of ImageContext. 291 @retval RETURN_BUFFER_TOO_SMALL The caller did not provide a large enough buffer. 292 Extended status information is in the ImageError field of ImageContext. 293 @retval RETURN_LOAD_ERROR The PE/COFF image is an EFI Runtime image with no relocations. 294 Extended status information is in the ImageError field of ImageContext. 295 @retval RETURN_INVALID_PARAMETER The image address is invalid. 296 Extended status information is in the ImageError field of ImageContext. 297 298 **/ 299 RETURN_STATUS 300 EFIAPI 301 PeCoffLoaderLoadImage ( 302 IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext 303 ); 304 305 306 /** 307 Reads contents of a PE/COFF image from a buffer in system memory. 308 309 This is the default implementation of a PE_COFF_LOADER_READ_FILE function 310 that assumes FileHandle pointer to the beginning of a PE/COFF image. 311 This function reads contents of the PE/COFF image that starts at the system memory 312 address specified by FileHandle. The read operation copies ReadSize bytes from the 313 PE/COFF image starting at byte offset FileOffset into the buffer specified by Buffer. 314 The size of the buffer actually read is returned in ReadSize. 315 316 If FileHandle is NULL, then ASSERT(). 317 If ReadSize is NULL, then ASSERT(). 318 If Buffer is NULL, then ASSERT(). 319 320 @param FileHandle The pointer to base of the input stream 321 @param FileOffset Offset into the PE/COFF image to begin the read operation. 322 @param ReadSize On input, the size in bytes of the requested read operation. 323 On output, the number of bytes actually read. 324 @param Buffer Output buffer that contains the data read from the PE/COFF image. 325 326 @retval RETURN_SUCCESS The data is read from FileOffset from the Handle into 327 the buffer. 328 **/ 329 RETURN_STATUS 330 EFIAPI 331 PeCoffLoaderImageReadFromMemory ( 332 IN VOID *FileHandle, 333 IN UINTN FileOffset, 334 IN OUT UINTN *ReadSize, 335 OUT VOID *Buffer 336 ); 337 338 339 /** 340 Reapply fixups on a fixed up PE32/PE32+ image to allow virtual calling at EFI 341 runtime. 342 343 This function reapplies relocation fixups to the PE/COFF image specified by ImageBase 344 and ImageSize so the image will execute correctly when the PE/COFF image is mapped 345 to the address specified by VirtualImageBase. RelocationData must be identical 346 to the FiuxupData buffer from the PE_COFF_LOADER_IMAGE_CONTEXT structure 347 after this PE/COFF image was relocated with PeCoffLoaderRelocateImage(). 348 349 Note that if the platform does not maintain coherency between the instruction cache(s) and the data 350 cache(s) in hardware, then the caller is responsible for performing cache maintenance operations 351 prior to transferring control to a PE/COFF image that is loaded using this library. 352 353 @param ImageBase The base address of a PE/COFF image that has been loaded 354 and relocated into system memory. 355 @param VirtImageBase The request virtual address that the PE/COFF image is to 356 be fixed up for. 357 @param ImageSize The size, in bytes, of the PE/COFF image. 358 @param RelocationData A pointer to the relocation data that was collected when the PE/COFF 359 image was relocated using PeCoffLoaderRelocateImage(). 360 361 **/ 362 VOID 363 EFIAPI 364 PeCoffLoaderRelocateImageForRuntime ( 365 IN PHYSICAL_ADDRESS ImageBase, 366 IN PHYSICAL_ADDRESS VirtImageBase, 367 IN UINTN ImageSize, 368 IN VOID *RelocationData 369 ); 370 371 /** 372 Unloads a loaded PE/COFF image from memory and releases its taken resource. 373 Releases any environment specific resources that were allocated when the image 374 specified by ImageContext was loaded using PeCoffLoaderLoadImage(). 375 376 For NT32 emulator, the PE/COFF image loaded by system needs to release. 377 For real platform, the PE/COFF image loaded by Core doesn't needs to be unloaded, 378 this function can simply return RETURN_SUCCESS. 379 380 If ImageContext is NULL, then ASSERT(). 381 382 @param ImageContext Pointer to the image context structure that describes the PE/COFF 383 image to be unloaded. 384 385 @retval RETURN_SUCCESS The PE/COFF image was unloaded successfully. 386 **/ 387 RETURN_STATUS 388 EFIAPI 389 PeCoffLoaderUnloadImage ( 390 IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext 391 ); 392 #endif 393