1 /** @file
2 I/O APIC library.
3
4 I/O APIC library assumes I/O APIC is enabled. It does not
5 handles cases where I/O APIC is disabled.
6
7 Copyright (c) 2011, Intel Corporation. All rights reserved.<BR>
8 This program and the accompanying materials
9 are licensed and made available under the terms and conditions of the BSD License
10 which accompanies this distribution. The full text of the license may be found at
11 http://opensource.org/licenses/bsd-license.php
12
13 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
14 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
15
16 **/
17
18 #include <Base.h>
19
20 #include <Library/IoApicLib.h>
21
22 #include <Library/DebugLib.h>
23 #include <Library/PcdLib.h>
24 #include <Library/IoLib.h>
25 #include <Library/LocalApicLib.h>
26
27 #include <Register/IoApic.h>
28
29 /**
30 Read a 32-bit I/O APIC register.
31
32 If Index is >= 0x100, then ASSERT().
33
34 @param Index Specifies the I/O APIC register to read.
35
36 @return The 32-bit value read from the I/O APIC register specified by Index.
37 **/
38 UINT32
39 EFIAPI
IoApicRead(IN UINTN Index)40 IoApicRead (
41 IN UINTN Index
42 )
43 {
44 ASSERT (Index < 0x100);
45 MmioWrite8 (PcdGet32 (PcdIoApicBaseAddress) + IOAPIC_INDEX_OFFSET, (UINT8)Index);
46 return MmioRead32 (PcdGet32 (PcdIoApicBaseAddress) + IOAPIC_DATA_OFFSET);
47 }
48
49 /**
50 Write a 32-bit I/O APIC register.
51
52 If Index is >= 0x100, then ASSERT().
53
54 @param Index Specifies the I/O APIC register to write.
55 @param Value Specifies the value to write to the I/O APIC register specified by Index.
56
57 @return The 32-bit value written to I/O APIC register specified by Index.
58 **/
59 UINT32
60 EFIAPI
IoApicWrite(IN UINTN Index,IN UINT32 Value)61 IoApicWrite (
62 IN UINTN Index,
63 IN UINT32 Value
64 )
65 {
66 ASSERT (Index < 0x100);
67 MmioWrite8 (PcdGet32 (PcdIoApicBaseAddress) + IOAPIC_INDEX_OFFSET, (UINT8)Index);
68 return MmioWrite32 (PcdGet32 (PcdIoApicBaseAddress) + IOAPIC_DATA_OFFSET, Value);
69 }
70
71 /**
72 Set the interrupt mask of an I/O APIC interrupt.
73
74 If Irq is larger than the maximum number I/O APIC redirection entries, then ASSERT().
75
76 @param Irq Specifies the I/O APIC interrupt to enable or disable.
77 @param Enable If TRUE, then enable the I/O APIC interrupt specified by Irq.
78 If FALSE, then disable the I/O APIC interrupt specified by Irq.
79 **/
80 VOID
81 EFIAPI
IoApicEnableInterrupt(IN UINTN Irq,IN BOOLEAN Enable)82 IoApicEnableInterrupt (
83 IN UINTN Irq,
84 IN BOOLEAN Enable
85 )
86 {
87 IO_APIC_VERSION_REGISTER Version;
88 IO_APIC_REDIRECTION_TABLE_ENTRY Entry;
89
90 Version.Uint32 = IoApicRead (IO_APIC_VERSION_REGISTER_INDEX);
91 ASSERT (Version.Bits.MaximumRedirectionEntry < 0xF0);
92 ASSERT (Irq <= Version.Bits.MaximumRedirectionEntry);
93
94 Entry.Uint32.Low = IoApicRead (IO_APIC_REDIRECTION_TABLE_ENTRY_INDEX + Irq * 2);
95 Entry.Bits.Mask = Enable ? 0 : 1;
96 IoApicWrite (IO_APIC_REDIRECTION_TABLE_ENTRY_INDEX + Irq * 2, Entry.Uint32.Low);
97 }
98
99 /**
100 Configures an I/O APIC interrupt.
101
102 Configure an I/O APIC Redirection Table Entry to deliver an interrupt in physical
103 mode to the Local APIC of the currntly executing CPU. The default state of the
104 entry is for the interrupt to be disabled (masked). IoApicEnableInterrupts() must
105 be used to enable(unmask) the I/O APIC Interrupt.
106
107 If Irq is larger than the maximum number I/O APIC redirection entries, then ASSERT().
108 If Vector >= 0x100, then ASSERT().
109 If DeliveryMode is not supported, then ASSERT().
110
111 @param Irq Specifies the I/O APIC interrupt to initialize.
112 @param Vector The 8-bit interrupt vector associated with the I/O APIC
113 Interrupt. Must be in the range 0x10..0xFE.
114 @param DeliveryMode A 3-bit value that specifies how the recept of the I/O APIC
115 interrupt is handled. The only supported values are:
116 0: IO_APIC_DELIVERY_MODE_FIXED
117 1: IO_APIC_DELIVERY_MODE_LOWEST_PRIORITY
118 2: IO_APIC_DELIVERY_MODE_SMI
119 4: IO_APIC_DELIVERY_MODE_NMI
120 5: IO_APIC_DELIVERY_MODE_INIT
121 7: IO_APIC_DELIVERY_MODE_EXTINT
122 @param LevelTriggered TRUE specifies a level triggered interrupt.
123 FALSE specifies an edge triggered interrupt.
124 @param AssertionLevel TRUE specified an active high interrupt.
125 FALSE specifies an active low interrupt.
126 **/
127 VOID
128 EFIAPI
IoApicConfigureInterrupt(IN UINTN Irq,IN UINTN Vector,IN UINTN DeliveryMode,IN BOOLEAN LevelTriggered,IN BOOLEAN AssertionLevel)129 IoApicConfigureInterrupt (
130 IN UINTN Irq,
131 IN UINTN Vector,
132 IN UINTN DeliveryMode,
133 IN BOOLEAN LevelTriggered,
134 IN BOOLEAN AssertionLevel
135 )
136 {
137 IO_APIC_VERSION_REGISTER Version;
138 IO_APIC_REDIRECTION_TABLE_ENTRY Entry;
139
140 Version.Uint32 = IoApicRead (IO_APIC_VERSION_REGISTER_INDEX);
141 ASSERT (Version.Bits.MaximumRedirectionEntry < 0xF0);
142 ASSERT (Irq <= Version.Bits.MaximumRedirectionEntry);
143 ASSERT (Vector <= 0xFF);
144 ASSERT (DeliveryMode < 8 && DeliveryMode != 6 && DeliveryMode != 3);
145
146 Entry.Uint32.Low = IoApicRead (IO_APIC_REDIRECTION_TABLE_ENTRY_INDEX + Irq * 2);
147 Entry.Bits.Vector = (UINT8)Vector;
148 Entry.Bits.DeliveryMode = (UINT32)DeliveryMode;
149 Entry.Bits.DestinationMode = 0;
150 Entry.Bits.Polarity = AssertionLevel ? 0 : 1;
151 Entry.Bits.TriggerMode = LevelTriggered ? 1 : 0;
152 Entry.Bits.Mask = 1;
153 IoApicWrite (IO_APIC_REDIRECTION_TABLE_ENTRY_INDEX + Irq * 2, Entry.Uint32.Low);
154
155 Entry.Uint32.High = IoApicRead (IO_APIC_REDIRECTION_TABLE_ENTRY_INDEX + Irq * 2 + 1);
156 Entry.Bits.DestinationID = GetApicId ();
157 IoApicWrite (IO_APIC_REDIRECTION_TABLE_ENTRY_INDEX + Irq * 2 + 1, Entry.Uint32.High);
158 }
159