1 /****************************************************************************** 2 * 3 * Copyright 2014 The Android Open Source Project 4 * Copyright 2002 - 2004 Open Interface North America, Inc. All rights 5 * reserved. 6 * 7 * Licensed under the Apache License, Version 2.0 (the "License"); 8 * you may not use this file except in compliance with the License. 9 * You may obtain a copy of the License at: 10 * 11 * http://www.apache.org/licenses/LICENSE-2.0 12 * 13 * Unless required by applicable law or agreed to in writing, software 14 * distributed under the License is distributed on an "AS IS" BASIS, 15 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 16 * See the License for the specific language governing permissions and 17 * limitations under the License. 18 * 19 ******************************************************************************/ 20 #ifndef _OI_STATUS_H 21 #define _OI_STATUS_H 22 /** 23 * @file 24 * This file contains status codes for BLUEmagic 3.0 software. 25 */ 26 27 #include "oi_stddefs.h" 28 29 /** \addtogroup Misc Miscellaneous APIs */ 30 /**@{*/ 31 32 #ifdef __cplusplus 33 extern "C" { 34 #endif 35 36 /** test it **/ 37 38 /** 39 * OI_STATUS is 16 bits, so status codes can range from 0 to 66535, inclusive. 40 */ 41 42 typedef enum { 43 OI_STATUS_SUCCESS = 0, /**< function call succeeded alias for #OI_OK */ 44 OI_OK = 0, /**< function call succeeded alias for #OI_STATUS_SUCCESS */ 45 OI_STATUS_INVALID_PARAMETERS = 101, /**< invalid function input parameters */ 46 OI_STATUS_NOT_IMPLEMENTED = 47 102, /**< attempt to use an unimplemented function */ 48 OI_STATUS_NOT_INITIALIZED = 103, /**< data not initialized */ 49 OI_STATUS_NO_RESOURCES = 50 104, /**< generic resource allocation failure status */ 51 OI_STATUS_INTERNAL_ERROR = 105, /**< internal inconsistency */ 52 OI_STATUS_OUT_OF_MEMORY = 106, /**< generally, OI_Malloc failed */ 53 OI_ILLEGAL_REENTRANT_CALL = 54 107, /**< violation of non-reentrant module policy */ 55 OI_STATUS_INITIALIZATION_FAILED = 108, /**< module initialization failed */ 56 OI_STATUS_INITIALIZATION_PENDING = 57 109, /**< inititialization not yet complete */ 58 OI_STATUS_NO_SCO_SUPPORT = 59 110, /**< SCO operation rejected; system not configured for SCO */ 60 OI_STATUS_OUT_OF_STATIC_MEMORY = 111, /**< static malloc failed */ 61 OI_TIMEOUT = 112, /**< generic timeout */ 62 OI_OS_ERROR = 113, /**< some operating system error */ 63 OI_FAIL = 114, /**< generic failure */ 64 OI_STRING_FORMAT_ERROR = 115, /**< error in VarString formatting string */ 65 OI_STATUS_PENDING = 116, /**< The operation is pending. */ 66 OI_STATUS_INVALID_COMMAND = 117, /**< The command was invalid. */ 67 OI_BUSY_FAIL = 118, /**< command rejected due to busy */ 68 OI_STATUS_ALREADY_REGISTERED = 69 119, /**< The registration has already been performed. */ 70 OI_STATUS_NOT_FOUND = 120, /**< The referenced resource was not found. */ 71 OI_STATUS_NOT_REGISTERED = 121, /**< not registered */ 72 OI_STATUS_NOT_CONNECTED = 122, /**< not connected */ 73 OI_CALLBACK_FUNCTION_REQUIRED = 74 123, /**< A callback function parameter was required. */ 75 OI_STATUS_MBUF_OVERFLOW = 76 124, /**< There is no room to add another buffer to an mbuf. */ 77 OI_STATUS_MBUF_UNDERFLOW = 78 125, /**< There was an attempt to pull too many bytes from an mbuf. */ 79 OI_STATUS_CONNECTION_EXISTS = 126, /**< connection exists */ 80 OI_STATUS_NOT_CONFIGURED = 127, /**< module not configured */ 81 OI_LOWER_STACK_ERROR = 128, /**< An error was reported by lower stack API. 82 This is used for embedded platforms. */ 83 OI_STATUS_RESET_IN_PROGRESS = 84 129, /**< Request failed/rejected because we're busy resetting. */ 85 OI_STATUS_ACCESS_DENIED = 130, /**< Generic access denied error. */ 86 OI_STATUS_DATA_ERROR = 131, /**< Generic data error. */ 87 OI_STATUS_INVALID_ROLE = 132, /**< The requested role was invalid. */ 88 OI_STATUS_ALREADY_CONNECTED = 89 133, /**< The requested connection is already established. */ 90 OI_STATUS_PARSE_ERROR = 134, /**< Parse error */ 91 OI_STATUS_END_OF_FILE = 135, /**< End of file */ 92 OI_STATUS_READ_ERROR = 136, /**< Generic read error */ 93 OI_STATUS_WRITE_ERROR = 137, /**< Generic write error */ 94 OI_STATUS_NEGOTIATION_FAILURE = 138, /**< Error in negotiation */ 95 OI_STATUS_READ_IN_PROGRESS = 139, /**< A read is already in progress */ 96 OI_STATUS_ALREADY_INITIALIZED = 97 140, /**< Initialization has already been done */ 98 OI_STATUS_STILL_CONNECTED = 141, /**< The service cannot be shutdown because 99 there are still active connections. */ 100 OI_STATUS_MTU_EXCEEDED = 142, /**< The packet is too big */ 101 OI_STATUS_LINK_TERMINATED = 143, /**< The link was terminated */ 102 OI_STATUS_PIN_CODE_TOO_LONG = 103 144, /**< Application gave us a pin code that is too long */ 104 OI_STATUS_STILL_REGISTERED = 105 145, /**< The service cannot be shutdown because there are still active 106 registrations. */ 107 OI_STATUS_SPEC_VIOLATION = 108 146, /**< Some application behavior contrary to BT specifications */ 109 110 OI_STATUS_PSM_ALREADY_REGISTERED = 111 402, /**< L2CAP: The specified PSM has already been registered. */ 112 OI_STATUS_INVALID_CID = 403, /**< L2CAP: CID is invalid or no longer valid 113 (connection terminated) */ 114 OI_STATUS_CID_NOT_FOUND = 115 404, /**< L2CAP: CID does not represent a current connection */ 116 OI_STATUS_CHANNEL_NOT_FOUND = 117 406, /**< L2CAP: CID does not represent a current connection */ 118 OI_STATUS_PSM_NOT_FOUND = 407, /**< L2CAP: PSM not found */ 119 OI_STATUS_INVALID_STATE = 408, /**< L2CAP: invalid state */ 120 OI_STATUS_WRITE_IN_PROGRESS = 410, /**< L2CAP: write in progress */ 121 OI_STATUS_INVALID_PACKET = 411, /**< L2CAP: invalid packet */ 122 OI_STATUS_SEND_COMPLETE = 412, /**< L2CAP: send is complete */ 123 OI_STATUS_INVALID_HANDLE = 414, /**< L2CAP: handle is invalid */ 124 OI_STATUS_GROUP_FULL = 125 418, /**< L2CAP: No more members can be added to the specified group. */ 126 OI_STATUS_DEVICE_ALREADY_IN_GROUP = 127 423, /**< L2CAP: The device already exists in the group. */ 128 OI_STATUS_DUPLICATE_GROUP = 129 425, /**< L2CAP: attempt to add more than one group */ 130 OI_STATUS_EMPTY_GROUP = 426, /**< L2CAP: group is empty */ 131 OI_STATUS_PACKET_NOT_FOUND = 427, /**< L2CAP: packet not found */ 132 OI_STATUS_BUFFER_TOO_SMALL = 428, /**< L2CAP: The buffer size is too small. */ 133 OI_STATUS_IDENTIFIER_NOT_FOUND = 429, /**< L2CAP: identifier not found */ 134 135 OI_L2CAP_DISCONNECT_LOWER_LAYER = 136 430, /**< L2CAP: The lower level forced a disconnect. */ 137 OI_L2CAP_DISCONNECT_REMOTE_REQUEST = 138 431, /**< L2CAP: The remote device requested a disconnect. */ 139 OI_L2CAP_GROUP_ADD_CONNECT_FAIL = 433, /**< L2CAP: Group add connect faiL */ 140 OI_L2CAP_GROUP_REMOVE_FAILURE = 434, /**< L2CAP: Group remove failure */ 141 OI_L2CAP_DATA_WRITE_ERROR_LINK_TERM = 142 435, /**< L2CAP: Data write error LINK_TERM */ 143 OI_L2CAP_DISCONNECT_LOCAL_REQUEST = 144 436, /**< L2CAP: Disconnect local request */ 145 146 OI_L2CAP_CONNECT_TIMEOUT = 437, /**< L2CAP: Connect timeout */ 147 OI_L2CAP_DISCONNECT_TIMEOUT = 439, /**< L2CAP: Disconnect timeout */ 148 OI_L2CAP_PING_TIMEOUT = 440, /**< L2CAP: Ping timeout */ 149 OI_L2CAP_GET_INFO_TIMEOUT = 441, /**< L2CAP: Get info timeout */ 150 OI_L2CAP_INVALID_ADDRESS = 444, /**< L2CAP: Invalid address */ 151 OI_L2CAP_CMD_REJECT_RCVD = 152 445, /**< L2CAP: remote sent us 'command reject' response */ 153 154 OI_L2CAP_CONNECT_BASE = 450, /**< L2CAP: Connect base */ 155 OI_L2CAP_CONNECT_PENDING = 451, /**< L2CAP: Connect pending */ 156 OI_L2CAP_CONNECT_REFUSED_INVALID_PSM = 157 452, /**< L2CAP: Connect refused invalid PSM */ 158 OI_L2CAP_CONNECT_REFUSED_SECURITY = 159 453, /**< L2CAP: Connect refused security */ 160 OI_L2CAP_CONNECT_REFUSED_NO_RESOURCES = 161 454, /**< L2CAP: Connect refused no resources */ 162 163 OI_L2CAP_CONFIG_BASE = 460, /**< L2CAP: Config base */ 164 OI_L2CAP_CONFIG_FAIL_INVALID_PARAMETERS = 165 461, /**< L2CAP: Config fail invalid parameters */ 166 OI_L2CAP_CONFIG_FAIL_NO_REASON = 462, /**< L2CAP: Config fail no reason */ 167 OI_L2CAP_CONFIG_FAIL_UNKNOWN_OPTIONS = 168 463, /**< L2CAP: Config fail unknown options */ 169 170 OI_L2CAP_GET_INFO_BASE = 470, /**< L2CAP: Get info base */ 171 OI_L2CAP_GET_INFO_NOT_SUPPORTED = 471, /**< L2CAP: Get info not supported */ 172 OI_L2CAP_MTU_EXCEEDED = 173 472, /**< L2CAP: The MTU of the channel was exceeded */ 174 OI_L2CAP_INVALID_PSM = 482, /**< L2CAP: Invalid PSM */ 175 OI_L2CAP_INVALID_MTU = 483, /**< L2CAP: Invalid MTU */ 176 OI_L2CAP_INVALID_FLUSHTO = 484, /**< L2CAP: Invalid flush timeout */ 177 178 OI_HCI_NO_SUCH_CONNECTION = 179 601, /**< HCI: caller specified a non-existent connection handle */ 180 OI_HCI_CB_LIST_FULL = 181 603, /**< HCI: callback list is full, cannot attempt to send command */ 182 OI_HCI_EVENT_UNDERRUN = 183 605, /**< HCI: parsing event packet, premature end-of-parameters */ 184 OI_HCI_UNKNOWN_EVENT_CODE = 185 607, /**< HCI: event received - event code is unknown */ 186 OI_HCI_BAD_EVENT_PARM_LEN = 187 608, /**< HCI: event - parameter length is incorrect */ 188 OI_HCI_CMD_QUEUE_FULL = 611, /**< HCI: command queue is full */ 189 OI_HCI_SHORT_EVENT = 190 612, /**< HCI: event received, missing event code and/or parm len */ 191 OI_HCI_TRANSMIT_NOT_READY = 613, /**< HCI: ACL/SCO transmit request failed - 192 busy or no buffers available */ 193 OI_HCI_ORPHAN_SENT_EVENT = 194 614, /**< HCI: got spurious 'sent' event from transport layer */ 195 OI_HCI_CMD_TABLE_ERROR = 196 615, /**< HCI: inconsistency in the internal command table */ 197 OI_HCI_UNKNOWN_CMD_ID = 616, /**< HCI: HciApi Command - unknown command id */ 198 OI_HCI_UNEXPECTED_EVENT = 199 619, /**< HCI: event received which only occurs in response to our cmd */ 200 OI_HCI_EVENT_TABLE_ERROR = 201 620, /**< HCI: inconsistency in the internal event table */ 202 OI_HCI_EXPECTED_EVENT_TIMOUT = 203 621, /**< HCI: timed out waiting for an expected event */ 204 OI_HCI_NO_CMD_DESC_FOR_OPCODE = 622, /**< HCI: event opcode is not known */ 205 OI_HCI_INVALID_OPCODE_ERROR = 623, /**< HCI: command opcode is invalid */ 206 OI_HCI_FLOW_CONTROL_DISABLED = 624, /**< HCI: can not use host flow control 207 APIs if disabled in configuration */ 208 OI_HCI_TX_COMPLETE = 209 625, /**< HCI: packet delivery to Host Controler complete */ 210 OI_HCI_TX_ERROR = 626, /**< HCI: failed to deliver packet to Host Controler */ 211 OI_HCI_DEVICE_NOT_INITIALIZED = 627, /**< HCI: commands from upper layers 212 disallowed until device is up and 213 running */ 214 OI_HCI_UNSUPPORTED_COMMAND = 215 628, /**< HCI: command requested is not supported by local device */ 216 OI_HCI_PASSTHROUGH_ERROR = 217 629, /**< HCI: Error processing passthrough command */ 218 OI_HCI_PASSTHROUGH_ALREADY_SET = 219 630, /**< HCI: Passthrough mode already enabled */ 220 OI_HCI_RESET_FAILURE = 631, /**< HCI: failed to reset the device/baseband */ 221 OI_HCI_TRANSPORT_RESET = 632, /**< HCI: some operation failed because of a 222 reset in the transport */ 223 OI_HCIERR_HCIIFC_INIT_FAILURE = 224 633, /**< HCI: failed to initialize transport layer interface */ 225 226 OI_HCIERR_FIRST_ERROR_VALUE = 701, /**< marker for first HCI protocol error */ 227 OI_HCIERR_UNKNOWN_HCI_COMMAND = 701, /**< HCI: protocol error 0x01 */ 228 OI_HCIERR_NO_CONNECTION = 702, /**< HCI: protocol error 0x02 */ 229 OI_HCIERR_HARDWARE_FAILURE = 703, /**< HCI: protocol error 0x03 */ 230 OI_HCIERR_PAGE_TIMEOUT = 704, /**< HCI: protocol error 0x04 */ 231 OI_HCIERR_AUTHENTICATION_FAILURE = 705, /**< HCI: protocol error 0x05 */ 232 OI_HCIERR_KEY_MISSING = 706, /**< HCI: protocol error 0x06 */ 233 OI_HCIERR_MEMORY_FULL = 707, /**< HCI: protocol error 0x07 */ 234 OI_HCIERR_CONNECTION_TIMEOUT = 708, /**< HCI: protocol error 0x08 */ 235 OI_HCIERR_MAX_NUM_OF_CONNECTIONS = 709, /**< HCI: protocol error 0x09 */ 236 OI_HCIERR_MAX_NUM_OF_SCO_CONNECTIONS = 710, /**< HCI: protocol error 0x0A */ 237 OI_HCIERR_ACL_CONNECTION_ALREADY_EXISTS = 238 711, /**< HCI: protocol error 0x0B */ 239 OI_HCIERR_COMMAND_DISALLOWED = 712, /**< HCI: protocol error 0x0C */ 240 OI_HCIERR_HOST_REJECTED_RESOURCES = 713, /**< HCI: protocol error 0x0D */ 241 OI_HCIERR_HOST_REJECTED_SECURITY = 714, /**< HCI: protocol error 0x0E */ 242 OI_HCIERR_HOST_REJECTED_PERSONAL_DEVICE = 243 715, /**< HCI: protocol error 0x0F */ 244 OI_HCIERR_HOST_TIMEOUT = 716, /**< HCI: protocol error 0x10 */ 245 OI_HCIERR_UNSUPPORTED = 717, /**< HCI: protocol error 0x11 */ 246 OI_HCIERR_INVALID_PARAMETERS = 718, /**< HCI: protocol error 0x12 */ 247 OI_HCIERR_OTHER_END_USER_DISCONNECT = 719, /**< HCI: protocol error 0x13 */ 248 OI_HCIERR_OTHER_END_LOW_RESOURCES = 720, /**< HCI: protocol error 0x14 */ 249 OI_HCIERR_OTHER_END_POWERING_OFF = 721, /**< HCI: protocol error 0x15 */ 250 OI_HCIERR_CONNECTION_TERMINATED_LOCALLY = 251 722, /**< HCI: protocol error 0x16 */ 252 OI_HCIERR_REPEATED_ATTEMPTS = 723, /**< HCI: protocol error 0x17 */ 253 OI_HCIERR_PAIRING_NOT_ALLOWED = 724, /**< HCI: protocol error 0x18 */ 254 OI_HCIERR_UNKNOWN_LMP_PDU = 725, /**< HCI: protocol error 0x19 */ 255 OI_HCIERR_UNSUPPORTED_REMOTE_FEATURE = 726, /**< HCI: protocol error 0x1A */ 256 OI_HCIERR_SCO_OFFSET_REJECTED = 727, /**< HCI: protocol error 0x1B */ 257 OI_HCIERR_SCO_INTERVAL_REJECTED = 728, /**< HCI: protocol error 0x1C */ 258 OI_HCIERR_SCO_AIR_MODE_REJECTED = 729, /**< HCI: protocol error 0x1D */ 259 OI_HCIERR_INVALID_LMP_PARMS = 730, /**< HCI: protocol error 0x1E */ 260 OI_HCIERR_UNSPECIFIED_ERROR = 731, /**< HCI: protocol error 0x1F */ 261 OI_HCIERR_UNSUPPORTED_LMP_PARAMETERS = 732, /**< HCI: protocol error 0x20 */ 262 OI_HCIERR_ROLE_CHANGE_NOT_ALLOWED = 733, /**< HCI: protocol error 0x21 */ 263 OI_HCIERR_LMP_RESPONSE_TIMEOUT = 734, /**< HCI: protocol error 0x22 */ 264 OI_HCIERR_LMP_ERROR_TRANS_COLLISION = 735, /**< HCI: protocol error 0x23 */ 265 OI_HCIERR_LMP_PDU_NOT_ALLOWED = 736, /**< HCI: protocol error 0x24 */ 266 OI_HCIERR_ENCRYPTION_MODE_NOT_ACCEPTABLE = 267 737, /**< HCI: protocol error 0x25 */ 268 OI_HCIERR_UNIT_KEY_USED = 738, /**< HCI: protocol error 0x26 */ 269 OI_HCIERR_QOS_NOT_SUPPORTED = 739, /**< HCI: protocol error 0x27 */ 270 OI_HCIERR_INSTANT_PASSED = 740, /**< HCI: protocol error 0x28 */ 271 OI_HCIERR_UNIT_KEY_PAIRING_UNSUPPORTED = 741, /**< HCI: protocol error 0x29 */ 272 OI_HCIERR_DIFFERENT_TRANS_COLLISION = 742, /**< HCI: protocol error 0x2A */ 273 OI_HCIERR_RESERVED_2B = 743, /**< HCI: protocol error 0x2B */ 274 OI_HCIERR_QOS_UNACCEPTABLE_PARAMETER = 744, /**< HCI: protocol error 0x2C */ 275 OI_HCIERR_QOS_REJECTED = 745, /**< HCI: protocol error 0x2D */ 276 OI_HCIERR_CHANNEL_CLASSIFICATION_NS = 746, /**< HCI: protocol error 0x2E */ 277 OI_HCIERR_INSUFFICIENT_SECURITY = 747, /**< HCI: protocol error 0x2F */ 278 OI_HCIERR_PARM_OUT_OF_MANDATORY_RANGE = 748, /**< HCI: protocol error 0x30 */ 279 OI_HCIERR_RESERVED_31 = 749, /**< HCI: protocol error 0x31 */ 280 OI_HCIERR_ROLE_SWITCH_PENDING = 750, /**< HCI: protocol error 0x32 */ 281 OI_HCIERR_RESERVED_33 = 751, /**< HCI: protocol error 0x33 */ 282 OI_HCIERR_RESERVED_SLOT_VIOLATION = 752, /**< HCI: protocol error 0x34 */ 283 OI_HCIERR_ROLE_SWITCH_FAILED = 753, /**< HCI: protocol error 0x35 */ 284 OI_HCIERR_EIR_TOO_LARGE = 754, /**< HCI: protocol error 0x36 */ 285 OI_HCIERR_SSP_NOT_SUPPORTED_BY_HOST = 755, /**< HCI: protocol error 0x37 */ 286 OI_HCIERR_HOST_BUSY_PAIRING = 756, /**< HCI: protocol error 0x38 */ 287 288 OI_HCIERR_UNKNOWN_ERROR = 757, /**< HCI: unknown error code */ 289 OI_HCIERR_LAST_ERROR_VALUE = 757, /**< marker for last HCI protocol error */ 290 291 OI_SDP_SPEC_ERROR = 800, /**< SDP: Base error status for mapping OI_STATUS 292 codes to SDP errors */ 293 OI_SDP_INVALID_SERVICE_RECORD_HANDLE = 294 (OI_SDP_SPEC_ERROR + 295 2), /**< SDP: protocol error Invalid Service Record Handle */ 296 OI_SDP_INVALID_REQUEST_SYNTAX = 297 (OI_SDP_SPEC_ERROR + 298 3), /**< SDP: protocol error Invalid Request Syntax */ 299 OI_SDP_INVALID_PDU_SIZE = 300 (OI_SDP_SPEC_ERROR + 4), /**< SDP: protocol error Invalid PDU Size */ 301 OI_SDP_INVALID_CONTINUATION_STATE = 302 (OI_SDP_SPEC_ERROR + 303 5), /**< SDP: protocol error Invalid Continuation State */ 304 OI_SDP_INSUFFICIENT_RESOURCES = 305 (OI_SDP_SPEC_ERROR + 306 6), /**< SDP: protocol error Insufficient Resources */ 307 OI_SDP_ERROR = 807, /**< SDP: server returned an error code */ 308 OI_SDP_CORRUPT_DATA_ELEMENT = 309 808, /**< SDP: Invalid or corrupt data element representation */ 310 OI_SDP_SERVER_NOT_CONNECTED = 311 810, /**< SDP: Attempt to disconnect from an unconnected server */ 312 OI_SDP_ACCESS_DENIED = 811, /**< SDP: Server denied access to server */ 313 OI_SDP_ATTRIBUTES_OUT_OF_ORDER = 314 812, /**< SDP: Attributes in attribute list not in ascending order */ 315 OI_SDP_DEVICE_DOES_NOT_SUPPORT_SDP = 316 813, /**< SDP: Tried to connect to a device that does not support SDP */ 317 OI_SDP_NO_MORE_DATA = 318 815, /**< SDP: Server does not have more continuation data */ 319 OI_SDP_REQUEST_PARAMS_TOO_LONG = 320 816, /**< SDP: Parameters for a request exceed the L2CAP buffer size */ 321 OI_SDP_REQUEST_PENDING = 817, /**< SDP: Cannot make a request when another 322 request is being processed */ 323 OI_SDP_SERVER_CONNECT_FAILED = 324 819, /**< SDP: Failed attempt to connect to an SDP server */ 325 OI_SDP_SERVER_TOO_MANY_CONNECTIONS = 326 821, /**< SDP: Exceeded maximum number of simultaneous server connections 327 */ 328 OI_SDP_NO_MATCHING_SERVICE_RECORD = 329 823, /**< SDP: No service record matched the UUID list */ 330 OI_SDP_PARTIAL_RESPONSE = 824, /**< SDP: Internal use only */ 331 OI_SDP_ILLEGAL_ARGUMENT = 332 825, /**< SDP: Illegal argument passed to an SDP function */ 333 OI_SDP_ATTRIBUTE_NOT_FOUND = 334 826, /**< SDP: A requested attribute was not found in a service record */ 335 OI_SDP_DATABASE_OUT_OF_RESOURCES = 336 827, /**< SDP: server database is out of memory */ 337 OI_SDP_SHORT_PDU = 829, /**< SDP: Not enough bytes in the packet */ 338 OI_SDP_TRANSACTION_ID_MISMATCH = 339 830, /**< SDP: Transaction Id was not as expected */ 340 OI_SDP_UNEXPECTED_RESPONSE_PDU_ID = 341 831, /**< SDP: Did not expect this response PDU */ 342 OI_SDP_REQUEST_TIMEOUT = 343 832, /**< SDP: Did not get a response within the timeout period */ 344 OI_SDP_INVALID_RESPONSE_SYNTAX = 345 833, /**< SDP: Response is not correctly formatted */ 346 OI_SDP_CONNECTION_TIMEOUT = 347 834, /**< SDP: Connection attempt timed out at a lower layer */ 348 OI_SDP_RESPONSE_DATA_ERROR = 349 835, /**< SDP: Response to a service request appears to be corrupt */ 350 OI_SDP_TOO_MANY_ATTRIBUTE_BYTES = 351 836, /**< SDP: Response contained more bytes than requested. */ 352 OI_SDP_TOO_MANY_SERVICE_RECORDS = 353 837, /**< SDP: Response contained more service records than requested. */ 354 OI_SDP_INVALID_CONNECTION_ID = 355 838, /**< SDP: Invalid connection ID in an SDP request */ 356 OI_SDP_CANNOT_SET_ATTRIBUTE = 357 839, /**< SDP: Attempt to set a dynamic attribute value failed */ 358 OI_SDP_BADLY_FORMED_ATTRIBUTE_VALUE = 359 840, /**< SDP: An attribute value has the wrong type or structure */ 360 OI_SDP_NO_ATTRIBUTE_LIST_TO_REMOVE = 361 841, /**< SDP: Attempt to remove a non-existent attribute list from a 362 service record */ 363 OI_SDP_ATTRIBUTE_LIST_ALREADY_ADDED = 842, /**< SDP: An attribute list has 364 already been added to the 365 service record */ 366 OI_SDP_DATA_ELEMENT_TRUNCATED = 367 843, /**< SDP: Data element truncated (too few bytes) */ 368 369 OI_RFCOMM_WRITE_IN_PROGRESS = 901, /**< RFCOMM: Write in progress */ 370 OI_RFCOMM_INVALID_BAUDRATE = 903, /**< RFCOMM: Invalid baudrate */ 371 OI_RFCOMM_INVALID_DATABIT = 904, /**< RFCOMM: Invalid databit */ 372 OI_RFCOMM_INVALID_STOPBIT = 905, /**< RFCOMM: Invalid stopbit */ 373 OI_RFCOMM_INVALID_PARITY = 906, /**< RFCOMM: Invalid parity */ 374 OI_RFCOMM_INVALID_PARITYTYPE = 907, /**< RFCOMM: Invalid paritytype */ 375 OI_RFCOMM_INVALID_FLOWCONTROL = 908, /**< RFCOMM: Invalid flowcontrol */ 376 OI_RFCOMM_SESSION_EXISTS = 909, /**< RFCOMM: Session exists */ 377 OI_RFCOMM_INVALID_CHANNEL = 910, /**< RFCOMM: Invalid channel */ 378 OI_RFCOMM_DLCI_EXISTS = 911, /**< RFCOMM: DLCI exists */ 379 OI_RFCOMM_LINK_NOT_FOUND = 912, /**< RFCOMM: Link not found */ 380 OI_RFCOMM_REMOTE_REJECT = 913, /**< RFCOMM: Remote reject */ 381 OI_RFCOMM_TEST_IN_PROGRESS = 915, /**< RFCOMM: Test in progress */ 382 OI_RFCOMM_SESSION_NOT_FOUND = 916, /**< RFCOMM: Session not found */ 383 OI_RFCOMM_INVALID_PACKET = 917, /**< RFCOMM: Invalid packet */ 384 OI_RFCOMM_FRAMESIZE_EXCEEDED = 918, /**< RFCOMM: Framesize exceeded */ 385 OI_RFCOMM_INVALID_DLCI = 920, /**< RFCOMM: Invalid dlci */ 386 OI_RFCOMM_SERVER_NOT_REGISTERED = 921, /**< RFCOMM: Server not registered */ 387 OI_RFCOMM_CREDIT_ERROR = 922, /**< RFCOMM: Credit error */ 388 OI_RFCOMM_NO_CHANNEL_NUMBER = 923, /**< RFCOMM: No channel number */ 389 OI_RFCOMM_QUERY_IN_PROGRESS = 924, /**< RFCOMM: Query in progress */ 390 OI_RFCOMM_SESSION_SHUTDOWN = 925, /**< RFCOMM: Session shutdown */ 391 OI_RFCOMM_LOCAL_DEVICE_DISCONNECTED = 392 926, /**< RFCOMM: Local device disconnected */ 393 OI_RFCOMM_REMOTE_DEVICE_DISCONNECTED = 394 927, /**< RFCOMM: Remote device disconnected */ 395 OI_RFCOMM_OUT_OF_SERVER_CHANNELS = 928, /**< RFCOMM: Out of server channels */ 396 397 OI_DISPATCH_INVALID_CB_HANDLE = 398 1001, /**< Dispatcher was handed an invalid callback handle */ 399 OI_DISPATCH_TABLE_OVERFLOW = 1002, /**< Dispatcher table is full */ 400 401 OI_TEST_UNKNOWN_TEST = 1101, /**< TEST: Unknown test */ 402 OI_TEST_FAIL = 1102, /**< TEST: Fail */ 403 404 OI_HCITRANS_CANNOT_CONNECT_TO_DEVICE = 405 1201, /**< TRANSPORT: Cannot connect to device */ 406 OI_HCITRANS_BUFFER_TOO_SMALL = 1203, /**< TRANSPORT: Buffer too small */ 407 OI_HCITRANS_NULL_DEVICE_HANDLE = 1204, /**< TRANSPORT: Null device handle */ 408 OI_HCITRANS_IO_ERROR = 1205, /**< TRANSPORT: IO error */ 409 OI_HCITRANS_DEVICE_NOT_READY = 1206, /**< TRANSPORT: Device not ready */ 410 OI_HCITRANS_FUNCTION_NOT_SUPPORTED = 411 1207, /**< TRANSPORT: Function not supporteD */ 412 OI_HCITRANS_ACCESS_DENIED = 1209, /**< TRANSPORT: win32 */ 413 OI_HCITRANS_ACL_DATA_ERROR = 1210, /**< TRANSPORT: ACL data error */ 414 OI_HCITRANS_SCO_DATA_ERROR = 1211, /**< TRANSPORT: SCO data error */ 415 OI_HCITRANS_EVENT_DATA_ERROR = 1212, /**< TRANSPORT: HCI event data error */ 416 OI_HCITRANS_INTERNAL_ERROR = 417 1214, /**< TRANSPORT: Internal error in the transport */ 418 OI_HCITRANS_LINK_NOT_ACTIVE = 419 1215, /**< TRANSPORT: Link to the device is not currently active */ 420 OI_HCITRANS_INITIALIZING = 1216, /**< TRANSPORT: Transport is initializing */ 421 422 OI_DEVMGR_NO_CONNECTION = 1301, /**< DEVMGR: No connection */ 423 OI_DEVMGR_HARDWARE_ERROR = 1305, /**< DEVMGR: error reported by HCI */ 424 OI_DEVMGR_PENDING_CONNECT_LIST_FULL = 425 1307, /**< DEVMGR: Pending connect list full */ 426 OI_DEVMGR_CONNECTION_LIST_FULL = 1309, /**< DEVMGR: Connection list full */ 427 OI_DEVMGR_NO_SUCH_CONNECTION = 1310, /**< DEVMGR: No such connection */ 428 OI_DEVMGR_INQUIRY_IN_PROGRESS = 1311, /**< DEVMGR: Inquiry in progress */ 429 OI_DEVMGR_PERIODIC_INQUIRY_ACTIVE = 430 1312, /**< DEVMGR: Periodic inquiry active */ 431 OI_DEVMGR_NO_INQUIRIES_ACTIVE = 432 1313, /**< DEVMGR: can not cancel/exit if not active */ 433 OI_DEVMGR_DUPLICATE_CONNECTION = 1314, /**< DEVMGR: internal error */ 434 OI_DEVMGR_DUPLICATE_EVENT_CALLBACK = 435 1316, /**< DEVMGR: attempt to register same callback twice */ 436 OI_DEVMGR_EVENT_CALLBACK_LIST_FULL = 437 1317, /**< DEVMGR: can not register event callback, list is full */ 438 OI_DEVMGR_EVENT_CALLBACK_NOT_FOUND = 439 1318, /**< DEVMGR: attempt to unregister callback failed */ 440 OI_DEVMGR_BUSY = 441 1319, /**< DEVMGR: some operations can only execute one at a time */ 442 OI_DEVMGR_ENUM_UNEXPECTED_INQ_COMPLETE = 1320, /**< DEVMGR: inquiry complete 443 event in inappropriate 444 enumeration state */ 445 OI_DEVMGR_ENUM_UNEXPECTED_INQ_RESULT = 1321, /**< DEVMGR: inquiry result event 446 in inappropriate enumeration 447 state */ 448 OI_DEVMGR_ENUM_DATABASE_FULL = 449 1322, /**< DEVMGR: device enumeration, database is full, couldn't add a 450 new device */ 451 OI_DEVMGR_ENUM_INQUIRIES_OVERLAP = 1323, /**< DEVMGR: device enumeration, 452 periodic inquiries occurring too 453 close together */ 454 OI_DEVMGR_UNKNOWN_LINK_TYPE = 455 1324, /**< DEVMGR: HCI connect request with unkown link type */ 456 OI_DEVMGR_PARAM_IO_ACTIVE = 1325, /**< DEVMGR: request for parameter 457 read/write while param read/write active 458 */ 459 OI_DEVMGR_UNKNOWN_IAC_LAP = 1326, /**< DEVMGR: unrecognized IAC LAP */ 460 OI_DEVMGR_SCO_ALREADY_REGISTERED = 461 1327, /**< DEVMGR: only one application can use SCO */ 462 OI_DEVMGR_SCO_NOT_REGISTERED = 463 1328, /**< DEVMGR: SCO applications must register before using the API */ 464 OI_DEVMGR_SCO_WITHOUT_ACL = 465 1329, /**< DEVMGR: Got SCO connection but there is no underlying ACL 466 connection */ 467 OI_DEVMGR_NO_SUPPORT = 468 1330, /**< DEVMGR: Request is not supported by the device */ 469 OI_DEVMGR_WRITE_POLICY_FAILED = 1331, /**< DEVMGR: connection attempt failed - 470 unable to write link policy */ 471 OI_DEVMGR_NOT_IN_MASTER_MODE = 1332, /**< DEVMGR: OI_DEVMGR EndMasterMode 472 without prior 473 OI_DEVMGR_BeginMasterMode */ 474 OI_DEVMGR_POLICY_VIOLATION = 475 1333, /**< DEVMGR: low-power request is rejected - link policy does not 476 allow it */ 477 OI_DEVMGR_BUSY_TIMEOUT = 1334, /**< DEVMGR: queued operation timed out while 478 in the queue; \n 479 timeout configurable via @ref OI_CONFIG_DEVMGR::connectQueueTimeoutSecs 480 "connectQueueTimeoutSecs" */ 481 OI_DEVMGR_REENCRYPT_FAILED = 482 1335, /**< DEVMGR: failed to re-encrypt link after role switch */ 483 OI_DEVMGR_ROLE_POLICY_CONFLICT = 484 1336, /**< DEVMGR: requested role conflicts with current policy */ 485 OI_DEVMGR_BAD_INTERVAL = 1337, /**< DEVMGR: current linkTO outside range of 486 requested min/max interval */ 487 OI_DEVMGR_INVALID_SCO_HANDLE = 488 1338, /**< DEVMGR: HCI SCO event, invalid handle */ 489 OI_DEVMGR_CONNECTION_OVERLAP = 1339, /**< DEVMGR: Connection failed due to 490 race condition with remote side */ 491 OI_DEVMGR_ORPHAN_SUBRATE_COMPLETE = 492 1340, /**< DEVMGR: sniff subrate complete, but no callback */ 493 OI_DEVMGR_EIR_RESPONSE_2_LARGE = 494 1341, /**< DEVMGR: eir builder, response length would exceed spec max */ 495 496 OI_SECMGR_NO_POLICY = 497 1401, /**< SECMGR: no security policy has been established */ 498 OI_SECMGR_INTERNAL_ERROR = 1402, /**< SECMGR: internal inconsistency */ 499 OI_SECMGR_ORPHANED_CALLBACK = 500 1403, /**< SECMGR: we've been called back, but CB context is gone */ 501 OI_SECMGR_BUSY = 502 1404, /**< SECMGR: configure and access request cannot be concurrent */ 503 OI_SECMGR_DEVICE_NOT_TRUSTED = 504 1405, /**< SECMGR: l2cap access denied - device is not trusted */ 505 OI_SECMGR_DEVICE_ENCRYPT_FAIL = 506 1407, /**< SECMGR: l2cap access denied - failed to start encryption */ 507 OI_SECMGR_DISCONNECTED_FAIL = 508 1408, /**< SECMGR: l2cap access denied - disconnected */ 509 OI_SECMGR_ACCESS_PENDING = 510 1409, /**< SECMGR: l2cap access request is still pending */ 511 OI_SECMGR_PIN_CODE_TOO_SHORT = 512 1410, /**< SECMGR: Higher-layer process gave us a pin code that is too 513 short */ 514 OI_SECMGR_UNKNOWN_ENCRYPT_VALUE = 1411, /**< SECMGR: got EncryptionChange 515 event, unknown encryption enable 516 value */ 517 OI_SECMGR_INVALID_POLICY = 1412, /**< SECMGR: the specified security policy is 518 not valid for security mode */ 519 OI_SECMGR_AUTHORIZATION_FAILED = 520 1413, /**< SECMGR: device authorization failed */ 521 OI_SECMGR_ENCRYPTION_FAILED = 1414, /**< SECMGR: device encryption failed */ 522 OI_SECMGR_UNIT_KEY_UNSUPPORTED = 523 1415, /**< SECMGR: authentication failed due to non-support of unit keys 524 */ 525 OI_SECMGR_NOT_REGISTERED = 526 1416, /**< SECMGR: required registrations have not yet occurred */ 527 OI_SECMGR_ILLEGAL_WRITE_SSP_MODE = 528 1417, /**< SECMGR: 2.1 HCI spec does not allow SSP mode to be disabled */ 529 OI_SECMGR_INVALID_SEC_LEVEL = 530 1418, /**< SECMGR: security level for a service is not a valid value */ 531 OI_SECMGR_INSUFFICIENT_LINK_KEY = 1419, /**< SECMGR: link key type is not 532 sufficient to meet service 533 requirements */ 534 OI_SECMGR_INVALID_KEY_TYPE = 535 1420, /**< SECMGR: link key type is not a valid value */ 536 OI_SECMGR_SSP_NOT_ENCRYPTED = 537 1421, /**< SECMGR: ssp required encryption on incoming link */ 538 OI_SECMGR_ORPHAN_EVENT = 1422, /**< SECMGR: some HCI security event unrelated 539 to current processes */ 540 OI_SECMGR_NOT_BONDABLE = 1423, /**< SECMGR: not in bondable mode */ 541 542 OI_TCS_INVALID_ELEMENT_TYPE = 1602, /**< TCS: element type is invalid */ 543 OI_TCS_INVALID_PACKET = 1603, /**< TCS: packet is invalide */ 544 OI_TCS_CALL_IN_PROGRESS = 1604, /**< TCS: call is in progress */ 545 OI_TCS_NO_CALL_IN_PROGRESS = 1605, /**< TCS: no call in progress */ 546 547 OI_OBEX_CONTINUE = 1701, /**< OBEX: Continue processing OBEX request */ 548 OI_OBEX_COMMAND_ERROR = 549 1702, /**< OBEX: An unrecognized OBEX command opcode */ 550 OI_OBEX_CONNECTION_TIMEOUT = 551 1703, /**< OBEX: Timeout waiting for a response to a request */ 552 OI_OBEX_CONNECT_FAILED = 553 1704, /**< OBEX: An OBEX connection request did not succeed */ 554 OI_OBEX_DISCONNECT_FAILED = 1705, /**< OBEX: A disconnect failed probably 555 because the connection did not exist */ 556 OI_OBEX_ERROR = 1706, /**< OBEX: Unspecified OBEX error */ 557 OI_OBEX_INCOMPLETE_PACKET = 1707, /**< OBEX: Packet too short or corrupt */ 558 OI_OBEX_LENGTH_REQUIRED = 559 1708, /**< OBEX: Length header required in OBEX command */ 560 OI_OBEX_NOT_CONNECTED = 1709, /**< OBEX: No connection to OBEX server */ 561 OI_OBEX_NO_MORE_CONNECTIONS = 562 1710, /**< OBEX: Reached max connections limit */ 563 OI_OBEX_OPERATION_IN_PROGRESS = 564 1711, /**< OBEX: Another operation is still in progress on a connection */ 565 OI_OBEX_PUT_RESPONSE_ERROR = 566 1712, /**< OBEX: An error in the response to a PUT command */ 567 OI_OBEX_GET_RESPONSE_ERROR = 568 1713, /**< OBEX: An error in the response to a GET command */ 569 OI_OBEX_REQUIRED_HEADER_NOT_FOUND = 570 1714, /**< OBEX: packet was missing a required header */ 571 OI_OBEX_SERVICE_UNAVAILABLE = 572 1715, /**< OBEX: Unown OBEX target or required service */ 573 OI_OBEX_TOO_MANY_HEADER_BYTES = 574 1716, /**< OBEX: Headers will not fit in single OBEX packet */ 575 OI_OBEX_UNKNOWN_COMMAND = 1717, /**< OBEX: Unrecognized OBEX command */ 576 OI_OBEX_UNSUPPORTED_VERSION = 1718, /**< OBEX: Version mismatch */ 577 OI_OBEX_CLIENT_ABORTED_COMMAND = 578 1719, /**< OBEX: server received abort command */ 579 OI_OBEX_BAD_PACKET = 1720, /**< OBEX: Any malformed OBEX packet */ 580 OI_OBEX_BAD_REQUEST = 581 1721, /**< OBEX: Maps to OBEX response of the same name */ 582 OI_OBEX_OBJECT_OVERFLOW = 1723, /**< OBEX: Too many bytes received. */ 583 OI_OBEX_NOT_FOUND = 1724, /**< OBEX: Maps to obex response of same name */ 584 OI_OBEX_ACCESS_DENIED = 585 1735, /**< OBEX: Object could not be read or written. */ 586 OI_OBEX_VALUE_NOT_ACCEPTABLE = 587 1736, /**< OBEX: Value in a command was not in the acceptable range. */ 588 OI_OBEX_PACKET_OVERFLOW = 589 1737, /**< OBEX: Buffer will not fit in a single OBEX packet. */ 590 OI_OBEX_NO_SUCH_FOLDER = 591 1738, /**< OBEX: Error returned by a setpath operation. */ 592 OI_OBEX_NAME_REQUIRED = 593 1739, /**< OBEX: Name must be non-null and non-empty. */ 594 OI_OBEX_PASSWORD_TOO_LONG = 595 1740, /**< OBEX: Password exceeds implementation imposed length limit. */ 596 OI_OBEX_PRECONDITION_FAILED = 1741, /**< OBEX: response Precondition Failed */ 597 OI_OBEX_UNAUTHORIZED = 1742, /**< OBEX: authentication was not successful. */ 598 OI_OBEX_NOT_IMPLEMENTED = 1743, /**< OBEX: Unimplemented feature. */ 599 OI_OBEX_INVALID_AUTH_DIGEST = 600 1744, /**< OBEX: An authentication digest was bad. */ 601 OI_OBEX_INVALID_OPERATION = 602 1745, /**< OBEX: Operation not allowed at this time. */ 603 OI_OBEX_DATABASE_FULL = 1746, /**< OBEX: Sync database full. */ 604 OI_OBEX_DATABASE_LOCKED = 1747, /**< OBEX: Sync database locked. */ 605 OI_OBEX_INTERNAL_SERVER_ERROR = 606 1748, /**< OBEX: response Internal Server Error */ 607 OI_OBEX_UNSUPPORTED_MEDIA_TYPE = 608 1749, /**< OBEX: response Unsupported Media Type */ 609 OI_OBEX_PARTIAL_CONTENT = 1750, /**< OBEX: response Partial Content */ 610 OI_OBEX_METHOD_NOT_ALLOWED = 1751, /**< OBEX: response Method Not Allowed */ 611 OI_OBEXSRV_INCOMPLETE_GET = 1752, /**< OBEX: Indicates to a GET handler that 612 the request phase is still in progress */ 613 OI_OBEX_FOLDER_BROWSING_NOT_ALLOWED = 1753, /**< OBEX: Indicates that an FTP 614 server does not allow folder 615 browsing */ 616 OI_OBEX_SERVER_FORCED_DISCONNECT = 617 1754, /**< OBEX: connection was forcibly terminated by the server */ 618 OI_OBEX_OFS_ERROR = 1755, /**< OBEX: OPP object file system error occurred */ 619 OI_OBEX_FILEOP_ERROR = 620 1756, /**< OBEX: FTP/PBAP file operation system error occurred */ 621 OI_OBEX_USERID_TOO_LONG = 622 1757, /**< OBEX: User Id exceeds spec limited length limit. */ 623 624 OI_HANDSFREE_EVENT_REPORTING_DISABLED = 625 1801, /**< HANDSFREE: Event reporting disabled */ 626 OI_HANDSFREE_NOT_CONNECTED = 1802, /**< HANDSFREE: Not connected */ 627 OI_HANDSFREE_SERVICE_NOT_STARTED = 1803, /**< HANDSFREE: Cannot connect to 628 handsfree AG if handsfree service 629 not started */ 630 OI_HANDSFREE_AG_SERVICE_NOT_STARTED = 631 1804, /**< HANDSFREE: Cannot connect to handsfree device if handsfree AG 632 service not started */ 633 OI_HANDSFREE_COMMAND_IN_PROGRESS = 634 1805, /**< HANDSFREE: Cannot accept a command at this time */ 635 OI_HANDSFREE_AUDIO_ALREADY_CONNECTED = 636 1806, /**< HANDSFREE: Audio is already connected */ 637 OI_HANDSFREE_AUDIO_NOT_CONNECTED = 638 1807, /**< HANDSFREE: Audio is not connected */ 639 OI_HANDSFREE_FEATURE_NOT_SUPPORTED = 1808, /**< HANDSFREE: Local or remote 640 feature not supported for 641 requested command */ 642 643 OI_HEADSET_SERVICE_NOT_STARTED = 644 1901, /**< HEADSET: Cannot connect to headset AG if headset service not 645 started */ 646 OI_HEADSET_AG_SERVICE_NOT_STARTED = 1902, /**< HEADSET: Cannot connect to 647 headset device if headset AG 648 service not started */ 649 OI_HEADSET_COMMAND_IN_PROGRESS = 650 1903, /**< HEADSET: Cannot accept a command at this time */ 651 652 OI_BNEP_INVALID_MTU = 653 2001, /**< BNEP: The remote device cannot support the minimum BNEP MTU */ 654 OI_BNEP_SETUP_TIMEOUT = 2002, /**< BNEP: The setup request timed out. */ 655 OI_BNEP_SERVICE_NOT_REGISTERED = 656 2003, /**< BNEP: The requested service was not found. */ 657 OI_BNEP_INVALID_HANDLE = 658 2004, /**< BNEP: The specified connection handle is not valid. */ 659 OI_BNEP_RESPONSE_TIMEOUT = 660 2005, /**< BNEP: The timer for receiving a response has expired. */ 661 OI_BNEP_INVALID_CONNECTION = 2006, /**< BNEP: Invalid connection */ 662 OI_BNEP_INVALID_FILTER = 2007, /**< BNEP: The supplied filter was invalid. */ 663 OI_BNEP_CONNECTION_EXISTS = 664 2008, /**< BNEP: An attempt was made to create a duplicate connection. */ 665 OI_BNEP_NOT_INITIALIZED = 2009, /**< BNEP: Init has not been called */ 666 OI_BNEP_CONNECT_BASE = 2010, /**< BNEP: connection response codes */ 667 OI_BNEP_CONNECT_FAILED_INVALID_DEST_UUID = 668 2011, /**< BNEP: connect response code Invalid Dest UUID */ 669 OI_BNEP_CONNECT_FAILED_INVALID_SOURCE_UUID = 670 2012, /**< BNEP: connect response code Invalid Source UUID */ 671 OI_BNEP_CONNECT_FAILED_INVALID_UUID_SIZE = 672 2013, /**< BNEP: connect response code Invalid UUID Size */ 673 OI_BNEP_CONNECT_FAILED_NOT_ALLOWED = 674 2014, /**< BNEP: connect response code Not Allowed */ 675 OI_BNEP_FILTER_NET_BASE = 2020, /**< BNEP: filter response codes */ 676 OI_BNEP_FILTER_NET_UNSUPPORTED_REQUEST = 677 2021, /**< BNEP: filter response code Unsupported Request */ 678 OI_BNEP_FILTER_NET_FAILED_INVALID_PROTOCOL_TYPE = 679 2022, /**< BNEP: filter response code Invalid Protocol Type */ 680 OI_BNEP_FILTER_NET_FAILED_MAX_LIMIT_REACHED = 681 2023, /**< BNEP: filter response code Max Limit Reached */ 682 OI_BNEP_FILTER_NET_FAILED_SECURITY = 683 2024, /**< BNEP: filter response code Security */ 684 OI_BNEP_FILTER_MULTI_BASE = 2030, /**< BNEP: multicast response codes */ 685 OI_BNEP_FILTER_MULTI_UNSUPPORTED_REQUEST = 686 2031, /**< BNEP: multicast response code Unsupported Request */ 687 OI_BNEP_FILTER_MULTI_FAILED_INVALID_ADDRESS = 688 2032, /**< BNEP: multicast response code Invalid Address */ 689 OI_BNEP_FILTER_MULTI_FAILED_MAX_LIMIT_REACHED = 690 2033, /**< BNEP: multicast response code Max Limit Reached */ 691 OI_BNEP_FILTER_MULTI_FAILED_SECURITY = 692 2034, /**< BNEP: multicast response code Security */ 693 OI_BNEP_LOCAL_DEVICE_MUST_BE_MASTER = 694 2040, /**< BNEP: Device must be master of the piconet for this function */ 695 OI_BNEP_PACKET_FILTERED_OUT = 696 2041, /**< BNEP: Packet did not pass current filters */ 697 698 OI_NETIFC_UP_FAILED = 699 2101, /**< NETIFC: Could not bring up network interface */ 700 OI_NETIFC_COULD_NOT_CREATE_THREAD = 701 2102, /**< NETIFC: Network interface could not create a read thread */ 702 OI_NETIFC_INITIALIZATION_FAILED = 703 2103, /**< NETIFC: Error in network interface initialization */ 704 OI_NETIFC_INTERFACE_ALREADY_UP = 705 2104, /**< NETIFC: Network interface is already up */ 706 OI_NETIFC_INTERFACE_NOT_UP = 2105, /**< NETIFC: Network interface is not up */ 707 OI_NETIFC_PACKET_TOO_BIG = 2106, /**< NETIFC: The packet is too big */ 708 709 OI_PAN_ROLE_ALREADY_REGISTERED = 710 2201, /**< PAN: This PAN role was already registered */ 711 OI_PAN_ROLE_NOT_ALLOWED = 712 2202, /**< PAN: The PAN role is not currently allowed */ 713 OI_PAN_INCOMPATIBLE_ROLES = 714 2203, /**< PAN: Only certain local and remote role combinations are 715 permitted */ 716 OI_PAN_INVALID_ROLE = 717 2204, /**< PAN: Role specified is not one the defined PAN roles */ 718 OI_PAN_CONNECTION_IN_PROGRESS = 719 2205, /**< PAN: A PAN connection is currently being established */ 720 OI_PAN_USER_ALREADY_CONNECTED = 721 2206, /**< PAN: PAN user role only allows a single connection */ 722 OI_PAN_DEVICE_CONNECTED = 723 2207, /**< PAN: A PAN connection already exists to specified device */ 724 725 OI_CODEC_SBC_NO_SYNCWORD = 2301, /**< CODEC: Couldn't find an SBC SYNCWORD */ 726 OI_CODEC_SBC_NOT_ENOUGH_HEADER_DATA = 727 2302, /**< CODEC: Not enough data provided to decode an SBC header */ 728 OI_CODEC_SBC_NOT_ENOUGH_BODY_DATA = 729 2303, /**< CODEC: Decoded the header, but not enough data to contain the 730 rest of the frame */ 731 OI_CODEC_SBC_NOT_ENOUGH_AUDIO_DATA = 732 2304, /**< CODEC: Not enough audio data for this frame */ 733 OI_CODEC_SBC_CHECKSUM_MISMATCH = 734 2305, /**< CODEC: The frame header didn't match the checksum */ 735 OI_CODEC_SBC_PARTIAL_DECODE = 736 2306, /**< CODEC: Decoding was successful, but frame data still remains. 737 Next call will provide audio without consuming input data. */ 738 739 OI_FIFOQ_QUEUE_NOT_ALIGNED = 2401, /**< FIFOQ: queue must be 32-bit aligned */ 740 OI_FIFOQ_INVALID_Q = 2402, /**< FIFOQ: queue parameter is not a valid queue */ 741 OI_FIFOQ_BUF_TOO_LARGE = 742 2403, /**< FIFOQ: attempt to queue a buffer which is too large */ 743 OI_FIFOQ_FULL = 2404, /**< FIFOQ: enqueue() failed, queue is full */ 744 OI_FIFOQ_NOT_ALLOCATED = 745 2405, /**< FIFOQ: Enqueue QBuf() failed, buffer not allocated */ 746 OI_FIFOQ_INVALID_DATA_PTR = 747 2406, /**< FIFOQ: Enqueue QBuf() failed, data pointer does not match */ 748 749 OI_HID_HOST_SERVICE_NOT_STARTED = 2601, /**< HID: Cannot connect to a HID 750 device unless HID host is started 751 */ 752 OI_HID_DEVICE_SERVICE_NOT_STARTED = 753 2602, /**< HID: Cannot connect to a HID host unless HID device is started 754 */ 755 756 OI_AT_ERROR = 2701, /**< AT: ERROR response */ 757 OI_AT_NO_CARRIER = 2702, /**< AT: NO CARRIER response */ 758 OI_AT_BUSY = 2703, /**< AT: BUSY response */ 759 OI_AT_NO_ANSWER = 2704, /**< AT: NO ANSWER response */ 760 OI_AT_DELAYED = 2705, /**< AT: DELAYED response */ 761 OI_AT_BLACKLISTED = 2706, /**< AT: BLACKLISTED response */ 762 OI_AT_CME_ERROR = 2707, /**< AT: +CME ERROR response */ 763 OI_AT_CMS_ERROR = 2708, /**< AT: +CMS ERROR response */ 764 765 OI_BLST_CHARACTER_TIMEOUT = 766 2801, /**< BLST: Timeout expired while waiting for a character from the 767 client. */ 768 OI_BLST_ACKNOWLDGE_TIMEOUT = 769 2802, /**< BLST: Timeout expired while waiting for event acknowledgment 770 from the client */ 771 OI_BLST_TX_NOT_READY = 2803, /**< BLST: BLST is not ready to send a BHAPI 772 message to the client. */ 773 OI_BLST_TX_BUSY = 2804, /**< BLST: BLST transmit buffer is in use. */ 774 775 OI_AVDTP_CONNECTION_SEQ_ERROR = 776 2901, /**< AVDTP: sequencing of signalling/media channel connections 777 broken. */ 778 OI_AVDTP_OUT_OF_RESOURCES = 2902, /**< AVDTP: Tried to allocate too many 779 endpoints or signalling channels. */ 780 781 OI_PBAP_REPOSITORY_NOT_SET = 782 3001, /**< PBAP: Phonebook repository must be set for operation to 783 complete. */ 784 OI_PBAP_PHONEBOOK_NOT_SET = 785 3002, /**< PBAP: Phonebook be set for operation to complete. */ 786 787 OI_AADP_BAD_ENDPOINT = 3101, /**< AADP: Invalid local endpoint specified */ 788 OI_AADP_BAD_STATE = 789 3102, /**< AADP: AADP State is not correct for this operation. */ 790 791 OI_UNICODE_INVALID_SOURCE = 3200, /**< Unicode Conversion: Source string has 792 invalid character encoding. */ 793 OI_UNICODE_SOURCE_EXHAUSTED = 3201, /**< Unicode Conversion: Incomplete 794 Unicode character at end of source 795 buffer. */ 796 OI_UNICODE_DESTINATION_EXHAUSTED = 3202, /**< Unicode Conversion: Destination 797 buffer not large enough to hold 798 resulting Unicode string. */ 799 800 OI_AVRCP_TOO_MANY_CONNECTIONS = 3300, /**< AVRCP: Exceeded maximum number of 801 simultaneous AVCTP connections. */ 802 OI_AVRCP_NOT_IMPLEMENTED = 803 3301, /**< AVRCP: The target does not implement the command specified by 804 the opcode and operand. */ 805 OI_AVRCP_REJECTED = 3302, /**< AVRCP: The target cannot respond because of 806 invalid operands in command packet. */ 807 OI_AVRCP_INVALID_RESPONSE = 3303, /**< AVRCP: The controller received the 808 response with invalid parameters */ 809 OI_AVRCP_RESPONSE_PACKET_OVERFLOW = 810 3304, /**< AVRCP: The response message does not fir in one AVRCP packet 811 (512 bytes), has to be fragmented. */ 812 OI_AVRCP_RESPONSE_INVALID_PDU = 3305, /**< AVRCP: Command rejected: target 813 received a PDU that it did not 814 understand. */ 815 OI_AVRCP_RESPONSE_INVALID_PARAMETER = 3306, /**< AVRCP: Command rejected: 816 target received a PDU with a 817 parameter ID that it did not 818 understand. */ 819 OI_AVRCP_RESPONSE_PARAMETER_NOT_FOUND = 820 3307, /**< AVRCP: Command rejected: specified parameter not found, sent if 821 the parameter ID is understood, but content is wrong or 822 corrupted.*/ 823 OI_AVRCP_RESPONSE_INTERNAL_ERROR = 824 3308, /**< AVRCP: Command rejected: target detected other error 825 conditions. */ 826 OI_MAX_BM3_STATUS_VAL, /* Maximum BM3 status code */ 827 828 /* Status code values reserved for BM3 SDK platform-specific implementations 829 */ 830 OI_STATUS_RESERVED_FOR_BCOT = 9000, 831 832 /* Status code values reserved for BHAPI products */ 833 OI_STATUS_RESERVED_FOR_BHAPI = 9200, 834 835 /* Status code values reserved for Soundabout products */ 836 OI_STATUS_RESERVED_FOR_SOUNDABOUT = 9400, 837 838 /* 839 * Status code values greater than or equal to this value are reserved for use 840 * by applications. 841 * However, because of differences between compilers, and differences between 842 * 16-bit and 32-bit 843 * platforms custom status codes should be in the 16-bit range, so status 844 * codes can range from 0 845 * to 65534, inclusive (65535 is reserved) 846 */ 847 OI_STATUS_RESERVED_FOR_APPS = 10000, 848 849 OI_STATUS_NONE = 0xffff /**< Special status code to indicate that there is no 850 status. (Only to be used for special cases 851 involving OI_SLOG_ERROR() and OI_SLOG_WARNING().) 852 */ 853 854 } OI_STATUS; 855 856 /* Remeber to update the #define below when new reserved blocks are added to 857 * the list above. */ 858 #define OI_NUM_RESERVED_STATUS_BLOCKS \ 859 4 /**< Number of status code blocks reserved, including user apps */ 860 861 /** 862 * Test for success 863 */ 864 #define OI_SUCCESS(x) ((x) == OI_OK) 865 866 /*****************************************************************************/ 867 #ifdef __cplusplus 868 } 869 #endif 870 871 /**@}*/ 872 873 #endif /* _OI_STATUS_H */ 874