1 /* 2 * The copyright in this software is being made available under the 2-clauses 3 * BSD License, included below. This software may be subject to other third 4 * party and contributor rights, including patent rights, and no such rights 5 * are granted under this license. 6 * 7 * Copyright (c) 2002-2014, Universite catholique de Louvain (UCL), Belgium 8 * Copyright (c) 2002-2014, Professor Benoit Macq 9 * Copyright (c) 2001-2003, David Janssens 10 * Copyright (c) 2002-2003, Yannick Verschueren 11 * Copyright (c) 2003-2007, Francois-Olivier Devaux 12 * Copyright (c) 2003-2014, Antonin Descampe 13 * Copyright (c) 2005, Herve Drolon, FreeImage Team 14 * Copyright (c) 2006-2007, Parvatha Elangovan 15 * Copyright (c) 2008, Jerome Fimes, Communications & Systemes <jerome.fimes@c-s.fr> 16 * Copyright (c) 2010-2011, Kaori Hagihara 17 * Copyright (c) 2011-2012, Centre National d'Etudes Spatiales (CNES), France 18 * Copyright (c) 2012, CS Systemes d'Information, France 19 * All rights reserved. 20 * 21 * Redistribution and use in source and binary forms, with or without 22 * modification, are permitted provided that the following conditions 23 * are met: 24 * 1. Redistributions of source code must retain the above copyright 25 * notice, this list of conditions and the following disclaimer. 26 * 2. Redistributions in binary form must reproduce the above copyright 27 * notice, this list of conditions and the following disclaimer in the 28 * documentation and/or other materials provided with the distribution. 29 * 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS `AS IS' 31 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 32 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 33 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 34 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 35 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 36 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 37 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 38 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 39 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 40 * POSSIBILITY OF SUCH DAMAGE. 41 */ 42 #ifndef OPENJPEG_H 43 #define OPENJPEG_H 44 45 46 /* 47 ========================================================== 48 Compiler directives 49 ========================================================== 50 */ 51 52 /* 53 The inline keyword is supported by C99 but not by C90. 54 Most compilers implement their own version of this keyword ... 55 */ 56 #ifndef INLINE 57 #if defined(_MSC_VER) 58 #define INLINE __forceinline 59 #elif defined(__GNUC__) 60 #define INLINE __inline__ 61 #elif defined(__MWERKS__) 62 #define INLINE inline 63 #else 64 /* add other compilers here ... */ 65 #define INLINE 66 #endif /* defined(<Compiler>) */ 67 #endif /* INLINE */ 68 69 /* deprecated attribute */ 70 #ifdef __GNUC__ 71 #define OPJ_DEPRECATED(func) func __attribute__ ((deprecated)) 72 #elif defined(_MSC_VER) 73 #define OPJ_DEPRECATED(func) __declspec(deprecated) func 74 #else 75 #pragma message("WARNING: You need to implement DEPRECATED for this compiler") 76 #define OPJ_DEPRECATED(func) func 77 #endif 78 79 #if defined(OPJ_STATIC) || !defined(_WIN32) 80 /* http://gcc.gnu.org/wiki/Visibility */ 81 # if __GNUC__ >= 4 82 # if defined(OPJ_STATIC) /* static library uses "hidden" */ 83 # define OPJ_API __attribute__ ((visibility ("hidden"))) 84 # else 85 # define OPJ_API __attribute__ ((visibility ("default"))) 86 # endif 87 # define OPJ_LOCAL __attribute__ ((visibility ("hidden"))) 88 # else 89 # define OPJ_API 90 # define OPJ_LOCAL 91 # endif 92 # define OPJ_CALLCONV 93 #else 94 # define OPJ_CALLCONV __stdcall 95 /* 96 The following ifdef block is the standard way of creating macros which make exporting 97 from a DLL simpler. All files within this DLL are compiled with the OPJ_EXPORTS 98 symbol defined on the command line. this symbol should not be defined on any project 99 that uses this DLL. This way any other project whose source files include this file see 100 OPJ_API functions as being imported from a DLL, whereas this DLL sees symbols 101 defined with this macro as being exported. 102 */ 103 # if defined(OPJ_EXPORTS) || defined(DLL_EXPORT) 104 # define OPJ_API __declspec(dllexport) 105 # else 106 # define OPJ_API __declspec(dllimport) 107 # endif /* OPJ_EXPORTS */ 108 #endif /* !OPJ_STATIC || !_WIN32 */ 109 110 typedef int OPJ_BOOL; 111 #define OPJ_TRUE 1 112 #define OPJ_FALSE 0 113 114 typedef char OPJ_CHAR; 115 typedef float OPJ_FLOAT32; 116 typedef double OPJ_FLOAT64; 117 typedef unsigned char OPJ_BYTE; 118 119 #include "opj_stdint.h" 120 121 typedef int8_t OPJ_INT8; 122 typedef uint8_t OPJ_UINT8; 123 typedef int16_t OPJ_INT16; 124 typedef uint16_t OPJ_UINT16; 125 typedef int32_t OPJ_INT32; 126 typedef uint32_t OPJ_UINT32; 127 typedef int64_t OPJ_INT64; 128 typedef uint64_t OPJ_UINT64; 129 130 typedef int64_t OPJ_OFF_T; /* 64-bit file offset type */ 131 132 #include <stdio.h> 133 typedef size_t OPJ_SIZE_T; 134 135 /* Avoid compile-time warning because parameter is not used */ 136 #define OPJ_ARG_NOT_USED(x) (void)(x) 137 138 /* 139 ========================================================== 140 Useful constant definitions 141 ========================================================== 142 */ 143 144 #define OPJ_PATH_LEN 4096 /**< Maximum allowed size for filenames */ 145 146 #define OPJ_J2K_MAXRLVLS 33 /**< Number of maximum resolution level authorized */ 147 #define OPJ_J2K_MAXBANDS (3*OPJ_J2K_MAXRLVLS-2) /**< Number of maximum sub-band linked to number of resolution level */ 148 149 #define OPJ_J2K_DEFAULT_NB_SEGS 10 150 #define OPJ_J2K_STREAM_CHUNK_SIZE 0x100000 /** 1 mega by default */ 151 #define OPJ_J2K_DEFAULT_HEADER_SIZE 1000 152 #define OPJ_J2K_MCC_DEFAULT_NB_RECORDS 10 153 #define OPJ_J2K_MCT_DEFAULT_NB_RECORDS 10 154 155 /* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */ 156 #define JPWL_MAX_NO_TILESPECS 16 /**< Maximum number of tile parts expected by JPWL: increase at your will */ 157 #define JPWL_MAX_NO_PACKSPECS 16 /**< Maximum number of packet parts expected by JPWL: increase at your will */ 158 #define JPWL_MAX_NO_MARKERS 512 /**< Maximum number of JPWL markers: increase at your will */ 159 #define JPWL_PRIVATEINDEX_NAME "jpwl_index_privatefilename" /**< index file name used when JPWL is on */ 160 #define JPWL_EXPECTED_COMPONENTS 3 /**< Expect this number of components, so you'll find better the first EPB */ 161 #define JPWL_MAXIMUM_TILES 8192 /**< Expect this maximum number of tiles, to avoid some crashes */ 162 #define JPWL_MAXIMUM_HAMMING 2 /**< Expect this maximum number of bit errors in marker id's */ 163 #define JPWL_MAXIMUM_EPB_ROOM 65450 /**< Expect this maximum number of bytes for composition of EPBs */ 164 /* <<UniPG */ 165 166 /** 167 * EXPERIMENTAL FOR THE MOMENT 168 * Supported options about file information used only in j2k_dump 169 */ 170 #define OPJ_IMG_INFO 1 /**< Basic image information provided to the user */ 171 #define OPJ_J2K_MH_INFO 2 /**< Codestream information based only on the main header */ 172 #define OPJ_J2K_TH_INFO 4 /**< Tile information based on the current tile header */ 173 #define OPJ_J2K_TCH_INFO 8 /**< Tile/Component information of all tiles */ 174 #define OPJ_J2K_MH_IND 16 /**< Codestream index based only on the main header */ 175 #define OPJ_J2K_TH_IND 32 /**< Tile index based on the current tile */ 176 /*FIXME #define OPJ_J2K_CSTR_IND 48*/ /**< */ 177 #define OPJ_JP2_INFO 128 /**< JP2 file information */ 178 #define OPJ_JP2_IND 256 /**< JP2 file index */ 179 180 /** 181 * JPEG 2000 Profiles, see Table A.10 from 15444-1 (updated in various AMD) 182 * These values help choosing the RSIZ value for the J2K codestream. 183 * The RSIZ value triggers various encoding options, as detailed in Table A.10. 184 * If OPJ_PROFILE_PART2 is chosen, it has to be combined with one or more extensions 185 * described hereunder. 186 * Example: rsiz = OPJ_PROFILE_PART2 | OPJ_EXTENSION_MCT; 187 * For broadcast profiles, the OPJ_PROFILE value has to be combined with the targeted 188 * mainlevel (3-0 LSB, value between 0 and 11): 189 * Example: rsiz = OPJ_PROFILE_BC_MULTI | 0x0005; (here mainlevel 5) 190 * For IMF profiles, the OPJ_PROFILE value has to be combined with the targeted mainlevel 191 * (3-0 LSB, value between 0 and 11) and sublevel (7-4 LSB, value between 0 and 9): 192 * Example: rsiz = OPJ_PROFILE_IMF_2K | 0x0040 | 0x0005; (here main 5 and sublevel 4) 193 * */ 194 #define OPJ_PROFILE_NONE 0x0000 /** no profile, conform to 15444-1 */ 195 #define OPJ_PROFILE_0 0x0001 /** Profile 0 as described in 15444-1,Table A.45 */ 196 #define OPJ_PROFILE_1 0x0002 /** Profile 1 as described in 15444-1,Table A.45 */ 197 #define OPJ_PROFILE_PART2 0x8000 /** At least 1 extension defined in 15444-2 (Part-2) */ 198 #define OPJ_PROFILE_CINEMA_2K 0x0003 /** 2K cinema profile defined in 15444-1 AMD1 */ 199 #define OPJ_PROFILE_CINEMA_4K 0x0004 /** 4K cinema profile defined in 15444-1 AMD1 */ 200 #define OPJ_PROFILE_CINEMA_S2K 0x0005 /** Scalable 2K cinema profile defined in 15444-1 AMD2 */ 201 #define OPJ_PROFILE_CINEMA_S4K 0x0006 /** Scalable 4K cinema profile defined in 15444-1 AMD2 */ 202 #define OPJ_PROFILE_CINEMA_LTS 0x0007 /** Long term storage cinema profile defined in 15444-1 AMD2 */ 203 #define OPJ_PROFILE_BC_SINGLE 0x0100 /** Single Tile Broadcast profile defined in 15444-1 AMD3 */ 204 #define OPJ_PROFILE_BC_MULTI 0x0200 /** Multi Tile Broadcast profile defined in 15444-1 AMD3 */ 205 #define OPJ_PROFILE_BC_MULTI_R 0x0300 /** Multi Tile Reversible Broadcast profile defined in 15444-1 AMD3 */ 206 #define OPJ_PROFILE_IMF_2K 0x0400 /** 2K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */ 207 #define OPJ_PROFILE_IMF_4K 0x0401 /** 4K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */ 208 #define OPJ_PROFILE_IMF_8K 0x0402 /** 8K Single Tile Lossy IMF profile defined in 15444-1 AMD 8 */ 209 #define OPJ_PROFILE_IMF_2K_R 0x0403 /** 2K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */ 210 #define OPJ_PROFILE_IMF_4K_R 0x0800 /** 4K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */ 211 #define OPJ_PROFILE_IMF_8K_R 0x0801 /** 8K Single/Multi Tile Reversible IMF profile defined in 15444-1 AMD 8 */ 212 213 /** 214 * JPEG 2000 Part-2 extensions 215 * */ 216 #define OPJ_EXTENSION_NONE 0x0000 /** No Part-2 extension */ 217 #define OPJ_EXTENSION_MCT 0x0100 /** Custom MCT support */ 218 219 /** 220 * JPEG 2000 profile macros 221 * */ 222 #define OPJ_IS_CINEMA(v) (((v) >= OPJ_PROFILE_CINEMA_2K)&&((v) <= OPJ_PROFILE_CINEMA_S4K)) 223 #define OPJ_IS_STORAGE(v) ((v) == OPJ_PROFILE_CINEMA_LTS) 224 #define OPJ_IS_BROADCAST(v) (((v) >= OPJ_PROFILE_BC_SINGLE)&&((v) <= ((OPJ_PROFILE_BC_MULTI_R) | (0x000b)))) 225 #define OPJ_IS_IMF(v) (((v) >= OPJ_PROFILE_IMF_2K)&&((v) <= ((OPJ_PROFILE_IMF_8K_R) | (0x009b)))) 226 #define OPJ_IS_PART2(v) ((v) & OPJ_PROFILE_PART2) 227 228 /** 229 * JPEG 2000 codestream and component size limits in cinema profiles 230 * */ 231 #define OPJ_CINEMA_24_CS 1302083 /** Maximum codestream length for 24fps */ 232 #define OPJ_CINEMA_48_CS 651041 /** Maximum codestream length for 48fps */ 233 #define OPJ_CINEMA_24_COMP 1041666 /** Maximum size per color component for 2K & 4K @ 24fps */ 234 #define OPJ_CINEMA_48_COMP 520833 /** Maximum size per color component for 2K @ 48fps */ 235 236 /* 237 ========================================================== 238 enum definitions 239 ========================================================== 240 */ 241 242 /** 243 * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead 244 * Rsiz Capabilities 245 * */ 246 typedef enum RSIZ_CAPABILITIES { 247 OPJ_STD_RSIZ = 0, /** Standard JPEG2000 profile*/ 248 OPJ_CINEMA2K = 3, /** Profile name for a 2K image*/ 249 OPJ_CINEMA4K = 4, /** Profile name for a 4K image*/ 250 OPJ_MCT = 0x8100 251 } OPJ_RSIZ_CAPABILITIES; 252 253 /** 254 * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead 255 * Digital cinema operation mode 256 * */ 257 typedef enum CINEMA_MODE { 258 OPJ_OFF = 0, /** Not Digital Cinema*/ 259 OPJ_CINEMA2K_24 = 1, /** 2K Digital Cinema at 24 fps*/ 260 OPJ_CINEMA2K_48 = 2, /** 2K Digital Cinema at 48 fps*/ 261 OPJ_CINEMA4K_24 = 3 /** 4K Digital Cinema at 24 fps*/ 262 } OPJ_CINEMA_MODE; 263 264 /** 265 * Progression order 266 * */ 267 typedef enum PROG_ORDER { 268 OPJ_PROG_UNKNOWN = -1, /**< place-holder */ 269 OPJ_LRCP = 0, /**< layer-resolution-component-precinct order */ 270 OPJ_RLCP = 1, /**< resolution-layer-component-precinct order */ 271 OPJ_RPCL = 2, /**< resolution-precinct-component-layer order */ 272 OPJ_PCRL = 3, /**< precinct-component-resolution-layer order */ 273 OPJ_CPRL = 4 /**< component-precinct-resolution-layer order */ 274 } OPJ_PROG_ORDER; 275 276 /** 277 * Supported image color spaces 278 */ 279 typedef enum COLOR_SPACE { 280 OPJ_CLRSPC_UNKNOWN = -1, /**< not supported by the library */ 281 OPJ_CLRSPC_UNSPECIFIED = 0, /**< not specified in the codestream */ 282 OPJ_CLRSPC_SRGB = 1, /**< sRGB */ 283 OPJ_CLRSPC_GRAY = 2, /**< grayscale */ 284 OPJ_CLRSPC_SYCC = 3, /**< YUV */ 285 OPJ_CLRSPC_EYCC = 4, /**< e-YCC */ 286 OPJ_CLRSPC_CMYK = 5 /**< CMYK */ 287 } OPJ_COLOR_SPACE; 288 289 /** 290 * Supported codec 291 */ 292 typedef enum CODEC_FORMAT { 293 OPJ_CODEC_UNKNOWN = -1, /**< place-holder */ 294 OPJ_CODEC_J2K = 0, /**< JPEG-2000 codestream : read/write */ 295 OPJ_CODEC_JPT = 1, /**< JPT-stream (JPEG 2000, JPIP) : read only */ 296 OPJ_CODEC_JP2 = 2, /**< JP2 file format : read/write */ 297 OPJ_CODEC_JPP = 3, /**< JPP-stream (JPEG 2000, JPIP) : to be coded */ 298 OPJ_CODEC_JPX = 4 /**< JPX file format (JPEG 2000 Part-2) : to be coded */ 299 } OPJ_CODEC_FORMAT; 300 301 302 /* 303 ========================================================== 304 event manager typedef definitions 305 ========================================================== 306 */ 307 308 /** 309 * Callback function prototype for events 310 * @param msg Event message 311 * @param client_data Client object where will be return the event message 312 * */ 313 typedef void (*opj_msg_callback)(const char *msg, void *client_data); 314 315 /* 316 ========================================================== 317 codec typedef definitions 318 ========================================================== 319 */ 320 321 /** 322 * Progression order changes 323 * 324 */ 325 typedef struct opj_poc { 326 /** Resolution num start, Component num start, given by POC */ 327 OPJ_UINT32 resno0, compno0; 328 /** Layer num end,Resolution num end, Component num end, given by POC */ 329 OPJ_UINT32 layno1, resno1, compno1; 330 /** Layer num start,Precinct num start, Precinct num end */ 331 OPJ_UINT32 layno0, precno0, precno1; 332 /** Progression order enum*/ 333 OPJ_PROG_ORDER prg1, prg; 334 /** Progression order string*/ 335 OPJ_CHAR progorder[5]; 336 /** Tile number */ 337 OPJ_UINT32 tile; 338 /** Start and end values for Tile width and height*/ 339 OPJ_INT32 tx0, tx1, ty0, ty1; 340 /** Start value, initialised in pi_initialise_encode*/ 341 OPJ_UINT32 layS, resS, compS, prcS; 342 /** End value, initialised in pi_initialise_encode */ 343 OPJ_UINT32 layE, resE, compE, prcE; 344 /** Start and end values of Tile width and height, initialised in pi_initialise_encode*/ 345 OPJ_UINT32 txS, txE, tyS, tyE, dx, dy; 346 /** Temporary values for Tile parts, initialised in pi_create_encode */ 347 OPJ_UINT32 lay_t, res_t, comp_t, prc_t, tx0_t, ty0_t; 348 } opj_poc_t; 349 350 /** 351 * Compression parameters 352 * */ 353 typedef struct opj_cparameters { 354 /** size of tile: tile_size_on = false (not in argument) or = true (in argument) */ 355 OPJ_BOOL tile_size_on; 356 /** XTOsiz */ 357 int cp_tx0; 358 /** YTOsiz */ 359 int cp_ty0; 360 /** XTsiz */ 361 int cp_tdx; 362 /** YTsiz */ 363 int cp_tdy; 364 /** allocation by rate/distortion */ 365 int cp_disto_alloc; 366 /** allocation by fixed layer */ 367 int cp_fixed_alloc; 368 /** add fixed_quality */ 369 int cp_fixed_quality; 370 /** fixed layer */ 371 int *cp_matrice; 372 /** comment for coding */ 373 char *cp_comment; 374 /** csty : coding style */ 375 int csty; 376 /** progression order (default OPJ_LRCP) */ 377 OPJ_PROG_ORDER prog_order; 378 /** progression order changes */ 379 opj_poc_t POC[32]; 380 /** number of progression order changes (POC), default to 0 */ 381 OPJ_UINT32 numpocs; 382 /** number of layers */ 383 int tcp_numlayers; 384 /** rates of layers - might be subsequently limited by the max_cs_size field. 385 * Should be decreasing. 1 can be 386 * used as last value to indicate the last layer is lossless. */ 387 float tcp_rates[100]; 388 /** different psnr for successive layers. Should be increasing. 0 can be 389 * used as last value to indicate the last layer is lossless. */ 390 float tcp_distoratio[100]; 391 /** number of resolutions */ 392 int numresolution; 393 /** initial code block width, default to 64 */ 394 int cblockw_init; 395 /** initial code block height, default to 64 */ 396 int cblockh_init; 397 /** mode switch (cblk_style) */ 398 int mode; 399 /** 1 : use the irreversible DWT 9-7, 0 : use lossless compression (default) */ 400 int irreversible; 401 /** region of interest: affected component in [0..3], -1 means no ROI */ 402 int roi_compno; 403 /** region of interest: upshift value */ 404 int roi_shift; 405 /* number of precinct size specifications */ 406 int res_spec; 407 /** initial precinct width */ 408 int prcw_init[OPJ_J2K_MAXRLVLS]; 409 /** initial precinct height */ 410 int prch_init[OPJ_J2K_MAXRLVLS]; 411 412 /**@name command line encoder parameters (not used inside the library) */ 413 /*@{*/ 414 /** input file name */ 415 char infile[OPJ_PATH_LEN]; 416 /** output file name */ 417 char outfile[OPJ_PATH_LEN]; 418 /** DEPRECATED. Index generation is now handeld with the opj_encode_with_info() function. Set to NULL */ 419 int index_on; 420 /** DEPRECATED. Index generation is now handeld with the opj_encode_with_info() function. Set to NULL */ 421 char index[OPJ_PATH_LEN]; 422 /** subimage encoding: origin image offset in x direction */ 423 int image_offset_x0; 424 /** subimage encoding: origin image offset in y direction */ 425 int image_offset_y0; 426 /** subsampling value for dx */ 427 int subsampling_dx; 428 /** subsampling value for dy */ 429 int subsampling_dy; 430 /** input file format 0: PGX, 1: PxM, 2: BMP 3:TIF*/ 431 int decod_format; 432 /** output file format 0: J2K, 1: JP2, 2: JPT */ 433 int cod_format; 434 /*@}*/ 435 436 /* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */ 437 /**@name JPWL encoding parameters */ 438 /*@{*/ 439 /** enables writing of EPC in MH, thus activating JPWL */ 440 OPJ_BOOL jpwl_epc_on; 441 /** error protection method for MH (0,1,16,32,37-128) */ 442 int jpwl_hprot_MH; 443 /** tile number of header protection specification (>=0) */ 444 int jpwl_hprot_TPH_tileno[JPWL_MAX_NO_TILESPECS]; 445 /** error protection methods for TPHs (0,1,16,32,37-128) */ 446 int jpwl_hprot_TPH[JPWL_MAX_NO_TILESPECS]; 447 /** tile number of packet protection specification (>=0) */ 448 int jpwl_pprot_tileno[JPWL_MAX_NO_PACKSPECS]; 449 /** packet number of packet protection specification (>=0) */ 450 int jpwl_pprot_packno[JPWL_MAX_NO_PACKSPECS]; 451 /** error protection methods for packets (0,1,16,32,37-128) */ 452 int jpwl_pprot[JPWL_MAX_NO_PACKSPECS]; 453 /** enables writing of ESD, (0=no/1/2 bytes) */ 454 int jpwl_sens_size; 455 /** sensitivity addressing size (0=auto/2/4 bytes) */ 456 int jpwl_sens_addr; 457 /** sensitivity range (0-3) */ 458 int jpwl_sens_range; 459 /** sensitivity method for MH (-1=no,0-7) */ 460 int jpwl_sens_MH; 461 /** tile number of sensitivity specification (>=0) */ 462 int jpwl_sens_TPH_tileno[JPWL_MAX_NO_TILESPECS]; 463 /** sensitivity methods for TPHs (-1=no,0-7) */ 464 int jpwl_sens_TPH[JPWL_MAX_NO_TILESPECS]; 465 /*@}*/ 466 /* <<UniPG */ 467 468 /** 469 * DEPRECATED: use RSIZ, OPJ_PROFILE_* and MAX_COMP_SIZE instead 470 * Digital Cinema compliance 0-not compliant, 1-compliant 471 * */ 472 OPJ_CINEMA_MODE cp_cinema; 473 /** 474 * Maximum size (in bytes) for each component. 475 * If == 0, component size limitation is not considered 476 * */ 477 int max_comp_size; 478 /** 479 * DEPRECATED: use RSIZ, OPJ_PROFILE_* and OPJ_EXTENSION_* instead 480 * Profile name 481 * */ 482 OPJ_RSIZ_CAPABILITIES cp_rsiz; 483 /** Tile part generation*/ 484 char tp_on; 485 /** Flag for Tile part generation*/ 486 char tp_flag; 487 /** MCT (multiple component transform) */ 488 char tcp_mct; 489 /** Enable JPIP indexing*/ 490 OPJ_BOOL jpip_on; 491 /** Naive implementation of MCT restricted to a single reversible array based 492 encoding without offset concerning all the components. */ 493 void * mct_data; 494 /** 495 * Maximum size (in bytes) for the whole codestream. 496 * If == 0, codestream size limitation is not considered 497 * If it does not comply with tcp_rates, max_cs_size prevails 498 * and a warning is issued. 499 * */ 500 int max_cs_size; 501 /** RSIZ value 502 To be used to combine OPJ_PROFILE_*, OPJ_EXTENSION_* and (sub)levels values. */ 503 OPJ_UINT16 rsiz; 504 } opj_cparameters_t; 505 506 #define OPJ_DPARAMETERS_IGNORE_PCLR_CMAP_CDEF_FLAG 0x0001 507 #define OPJ_DPARAMETERS_DUMP_FLAG 0x0002 508 509 /** 510 * Decompression parameters 511 * */ 512 typedef struct opj_dparameters { 513 /** 514 Set the number of highest resolution levels to be discarded. 515 The image resolution is effectively divided by 2 to the power of the number of discarded levels. 516 The reduce factor is limited by the smallest total number of decomposition levels among tiles. 517 if != 0, then original dimension divided by 2^(reduce); 518 if == 0 or not used, image is decoded to the full resolution 519 */ 520 OPJ_UINT32 cp_reduce; 521 /** 522 Set the maximum number of quality layers to decode. 523 If there are less quality layers than the specified number, all the quality layers are decoded. 524 if != 0, then only the first "layer" layers are decoded; 525 if == 0 or not used, all the quality layers are decoded 526 */ 527 OPJ_UINT32 cp_layer; 528 529 /**@name command line decoder parameters (not used inside the library) */ 530 /*@{*/ 531 /** input file name */ 532 char infile[OPJ_PATH_LEN]; 533 /** output file name */ 534 char outfile[OPJ_PATH_LEN]; 535 /** input file format 0: J2K, 1: JP2, 2: JPT */ 536 int decod_format; 537 /** output file format 0: PGX, 1: PxM, 2: BMP */ 538 int cod_format; 539 540 /** Decoding area left boundary */ 541 OPJ_UINT32 DA_x0; 542 /** Decoding area right boundary */ 543 OPJ_UINT32 DA_x1; 544 /** Decoding area up boundary */ 545 OPJ_UINT32 DA_y0; 546 /** Decoding area bottom boundary */ 547 OPJ_UINT32 DA_y1; 548 /** Verbose mode */ 549 OPJ_BOOL m_verbose; 550 551 /** tile number ot the decoded tile*/ 552 OPJ_UINT32 tile_index; 553 /** Nb of tile to decode */ 554 OPJ_UINT32 nb_tile_to_decode; 555 556 /*@}*/ 557 558 /* UniPG>> */ /* NOT YET USED IN THE V2 VERSION OF OPENJPEG */ 559 /**@name JPWL decoding parameters */ 560 /*@{*/ 561 /** activates the JPWL correction capabilities */ 562 OPJ_BOOL jpwl_correct; 563 /** expected number of components */ 564 int jpwl_exp_comps; 565 /** maximum number of tiles */ 566 int jpwl_max_tiles; 567 /*@}*/ 568 /* <<UniPG */ 569 570 unsigned int flags; 571 572 } opj_dparameters_t; 573 574 575 /** 576 * JPEG2000 codec V2. 577 * */ 578 typedef void * opj_codec_t; 579 580 /* 581 ========================================================== 582 I/O stream typedef definitions 583 ========================================================== 584 */ 585 586 /** 587 * Stream open flags. 588 * */ 589 /** The stream was opened for reading. */ 590 #define OPJ_STREAM_READ OPJ_TRUE 591 /** The stream was opened for writing. */ 592 #define OPJ_STREAM_WRITE OPJ_FALSE 593 594 /* 595 * Callback function prototype for read function 596 */ 597 typedef OPJ_SIZE_T(* opj_stream_read_fn)(void * p_buffer, OPJ_SIZE_T p_nb_bytes, 598 void * p_user_data) ; 599 600 /* 601 * Callback function prototype for write function 602 */ 603 typedef OPJ_SIZE_T(* opj_stream_write_fn)(void * p_buffer, 604 OPJ_SIZE_T p_nb_bytes, void * p_user_data) ; 605 606 /* 607 * Callback function prototype for skip function 608 */ 609 typedef OPJ_OFF_T(* opj_stream_skip_fn)(OPJ_OFF_T p_nb_bytes, 610 void * p_user_data) ; 611 612 /* 613 * Callback function prototype for seek function 614 */ 615 typedef OPJ_BOOL(* opj_stream_seek_fn)(OPJ_OFF_T p_nb_bytes, 616 void * p_user_data) ; 617 618 /* 619 * Callback function prototype for free user data function 620 */ 621 typedef void (* opj_stream_free_user_data_fn)(void * p_user_data) ; 622 623 /* 624 * JPEG2000 Stream. 625 */ 626 typedef void * opj_stream_t; 627 628 /* 629 ========================================================== 630 image typedef definitions 631 ========================================================== 632 */ 633 634 /** 635 * Defines a single image component 636 * */ 637 typedef struct opj_image_comp { 638 /** XRsiz: horizontal separation of a sample of ith component with respect to the reference grid */ 639 OPJ_UINT32 dx; 640 /** YRsiz: vertical separation of a sample of ith component with respect to the reference grid */ 641 OPJ_UINT32 dy; 642 /** data width */ 643 OPJ_UINT32 w; 644 /** data height */ 645 OPJ_UINT32 h; 646 /** x component offset compared to the whole image */ 647 OPJ_UINT32 x0; 648 /** y component offset compared to the whole image */ 649 OPJ_UINT32 y0; 650 /** precision */ 651 OPJ_UINT32 prec; 652 /** image depth in bits */ 653 OPJ_UINT32 bpp; 654 /** signed (1) / unsigned (0) */ 655 OPJ_UINT32 sgnd; 656 /** number of decoded resolution */ 657 OPJ_UINT32 resno_decoded; 658 /** number of division by 2 of the out image compared to the original size of image */ 659 OPJ_UINT32 factor; 660 /** image component data */ 661 OPJ_INT32 *data; 662 /** alpha channel */ 663 OPJ_UINT16 alpha; 664 } opj_image_comp_t; 665 666 /** 667 * Defines image data and characteristics 668 * */ 669 typedef struct opj_image { 670 /** XOsiz: horizontal offset from the origin of the reference grid to the left side of the image area */ 671 OPJ_UINT32 x0; 672 /** YOsiz: vertical offset from the origin of the reference grid to the top side of the image area */ 673 OPJ_UINT32 y0; 674 /** Xsiz: width of the reference grid */ 675 OPJ_UINT32 x1; 676 /** Ysiz: height of the reference grid */ 677 OPJ_UINT32 y1; 678 /** number of components in the image */ 679 OPJ_UINT32 numcomps; 680 /** color space: sRGB, Greyscale or YUV */ 681 OPJ_COLOR_SPACE color_space; 682 /** image components */ 683 opj_image_comp_t *comps; 684 /** 'restricted' ICC profile */ 685 OPJ_BYTE *icc_profile_buf; 686 /** size of ICC profile */ 687 OPJ_UINT32 icc_profile_len; 688 689 690 /** Whether to apply PCLR or not */ 691 OPJ_BOOL pdfium_use_colorspace; 692 } opj_image_t; 693 694 695 /** 696 * Component parameters structure used by the opj_image_create function 697 * */ 698 typedef struct opj_image_comptparm { 699 /** XRsiz: horizontal separation of a sample of ith component with respect to the reference grid */ 700 OPJ_UINT32 dx; 701 /** YRsiz: vertical separation of a sample of ith component with respect to the reference grid */ 702 OPJ_UINT32 dy; 703 /** data width */ 704 OPJ_UINT32 w; 705 /** data height */ 706 OPJ_UINT32 h; 707 /** x component offset compared to the whole image */ 708 OPJ_UINT32 x0; 709 /** y component offset compared to the whole image */ 710 OPJ_UINT32 y0; 711 /** precision */ 712 OPJ_UINT32 prec; 713 /** image depth in bits */ 714 OPJ_UINT32 bpp; 715 /** signed (1) / unsigned (0) */ 716 OPJ_UINT32 sgnd; 717 } opj_image_cmptparm_t; 718 719 720 /* 721 ========================================================== 722 Information on the JPEG 2000 codestream 723 ========================================================== 724 */ 725 /* QUITE EXPERIMENTAL FOR THE MOMENT */ 726 727 /** 728 * Index structure : Information concerning a packet inside tile 729 * */ 730 typedef struct opj_packet_info { 731 /** packet start position (including SOP marker if it exists) */ 732 OPJ_OFF_T start_pos; 733 /** end of packet header position (including EPH marker if it exists)*/ 734 OPJ_OFF_T end_ph_pos; 735 /** packet end position */ 736 OPJ_OFF_T end_pos; 737 /** packet distorsion */ 738 double disto; 739 } opj_packet_info_t; 740 741 742 /* UniPG>> */ 743 /** 744 * Marker structure 745 * */ 746 typedef struct opj_marker_info { 747 /** marker type */ 748 unsigned short int type; 749 /** position in codestream */ 750 OPJ_OFF_T pos; 751 /** length, marker val included */ 752 int len; 753 } opj_marker_info_t; 754 /* <<UniPG */ 755 756 /** 757 * Index structure : Information concerning tile-parts 758 */ 759 typedef struct opj_tp_info { 760 /** start position of tile part */ 761 int tp_start_pos; 762 /** end position of tile part header */ 763 int tp_end_header; 764 /** end position of tile part */ 765 int tp_end_pos; 766 /** start packet of tile part */ 767 int tp_start_pack; 768 /** number of packets of tile part */ 769 int tp_numpacks; 770 } opj_tp_info_t; 771 772 /** 773 * Index structure : information regarding tiles 774 */ 775 typedef struct opj_tile_info { 776 /** value of thresh for each layer by tile cfr. Marcela */ 777 double *thresh; 778 /** number of tile */ 779 int tileno; 780 /** start position */ 781 int start_pos; 782 /** end position of the header */ 783 int end_header; 784 /** end position */ 785 int end_pos; 786 /** precinct number for each resolution level (width) */ 787 int pw[33]; 788 /** precinct number for each resolution level (height) */ 789 int ph[33]; 790 /** precinct size (in power of 2), in X for each resolution level */ 791 int pdx[33]; 792 /** precinct size (in power of 2), in Y for each resolution level */ 793 int pdy[33]; 794 /** information concerning packets inside tile */ 795 opj_packet_info_t *packet; 796 /** add fixed_quality */ 797 int numpix; 798 /** add fixed_quality */ 799 double distotile; 800 /** number of markers */ 801 int marknum; 802 /** list of markers */ 803 opj_marker_info_t *marker; 804 /** actual size of markers array */ 805 int maxmarknum; 806 /** number of tile parts */ 807 int num_tps; 808 /** information concerning tile parts */ 809 opj_tp_info_t *tp; 810 } opj_tile_info_t; 811 812 /** 813 * Index structure of the codestream 814 */ 815 typedef struct opj_codestream_info { 816 /** maximum distortion reduction on the whole image (add for Marcela) */ 817 double D_max; 818 /** packet number */ 819 int packno; 820 /** writing the packet in the index with t2_encode_packets */ 821 int index_write; 822 /** image width */ 823 int image_w; 824 /** image height */ 825 int image_h; 826 /** progression order */ 827 OPJ_PROG_ORDER prog; 828 /** tile size in x */ 829 int tile_x; 830 /** tile size in y */ 831 int tile_y; 832 /** */ 833 int tile_Ox; 834 /** */ 835 int tile_Oy; 836 /** number of tiles in X */ 837 int tw; 838 /** number of tiles in Y */ 839 int th; 840 /** component numbers */ 841 int numcomps; 842 /** number of layer */ 843 int numlayers; 844 /** number of decomposition for each component */ 845 int *numdecompos; 846 /* UniPG>> */ 847 /** number of markers */ 848 int marknum; 849 /** list of markers */ 850 opj_marker_info_t *marker; 851 /** actual size of markers array */ 852 int maxmarknum; 853 /* <<UniPG */ 854 /** main header position */ 855 int main_head_start; 856 /** main header position */ 857 int main_head_end; 858 /** codestream's size */ 859 int codestream_size; 860 /** information regarding tiles inside image */ 861 opj_tile_info_t *tile; 862 } opj_codestream_info_t; 863 864 /* <----------------------------------------------------------- */ 865 /* new output management of the codestream information and index */ 866 867 /** 868 * Tile-component coding parameters information 869 */ 870 typedef struct opj_tccp_info { 871 /** component index */ 872 OPJ_UINT32 compno; 873 /** coding style */ 874 OPJ_UINT32 csty; 875 /** number of resolutions */ 876 OPJ_UINT32 numresolutions; 877 /** log2 of code-blocks width */ 878 OPJ_UINT32 cblkw; 879 /** log2 of code-blocks height */ 880 OPJ_UINT32 cblkh; 881 /** code-block coding style */ 882 OPJ_UINT32 cblksty; 883 /** discrete wavelet transform identifier: 0 = 9-7 irreversible, 1 = 5-3 reversible */ 884 OPJ_UINT32 qmfbid; 885 /** quantisation style */ 886 OPJ_UINT32 qntsty; 887 /** stepsizes used for quantization */ 888 OPJ_UINT32 stepsizes_mant[OPJ_J2K_MAXBANDS]; 889 /** stepsizes used for quantization */ 890 OPJ_UINT32 stepsizes_expn[OPJ_J2K_MAXBANDS]; 891 /** number of guard bits */ 892 OPJ_UINT32 numgbits; 893 /** Region Of Interest shift */ 894 OPJ_INT32 roishift; 895 /** precinct width */ 896 OPJ_UINT32 prcw[OPJ_J2K_MAXRLVLS]; 897 /** precinct height */ 898 OPJ_UINT32 prch[OPJ_J2K_MAXRLVLS]; 899 } 900 opj_tccp_info_t; 901 902 /** 903 * Tile coding parameters information 904 */ 905 typedef struct opj_tile_v2_info { 906 907 /** number (index) of tile */ 908 int tileno; 909 /** coding style */ 910 OPJ_UINT32 csty; 911 /** progression order */ 912 OPJ_PROG_ORDER prg; 913 /** number of layers */ 914 OPJ_UINT32 numlayers; 915 /** multi-component transform identifier */ 916 OPJ_UINT32 mct; 917 918 /** information concerning tile component parameters*/ 919 opj_tccp_info_t *tccp_info; 920 921 } opj_tile_info_v2_t; 922 923 /** 924 * Information structure about the codestream (FIXME should be expand and enhance) 925 */ 926 typedef struct opj_codestream_info_v2 { 927 /* Tile info */ 928 /** tile origin in x = XTOsiz */ 929 OPJ_UINT32 tx0; 930 /** tile origin in y = YTOsiz */ 931 OPJ_UINT32 ty0; 932 /** tile size in x = XTsiz */ 933 OPJ_UINT32 tdx; 934 /** tile size in y = YTsiz */ 935 OPJ_UINT32 tdy; 936 /** number of tiles in X */ 937 OPJ_UINT32 tw; 938 /** number of tiles in Y */ 939 OPJ_UINT32 th; 940 941 /** number of components*/ 942 OPJ_UINT32 nbcomps; 943 944 /** Default information regarding tiles inside image */ 945 opj_tile_info_v2_t m_default_tile_info; 946 947 /** information regarding tiles inside image */ 948 opj_tile_info_v2_t *tile_info; /* FIXME not used for the moment */ 949 950 } opj_codestream_info_v2_t; 951 952 953 /** 954 * Index structure about a tile part 955 */ 956 typedef struct opj_tp_index { 957 /** start position */ 958 OPJ_OFF_T start_pos; 959 /** end position of the header */ 960 OPJ_OFF_T end_header; 961 /** end position */ 962 OPJ_OFF_T end_pos; 963 964 } opj_tp_index_t; 965 966 /** 967 * Index structure about a tile 968 */ 969 typedef struct opj_tile_index { 970 /** tile index */ 971 OPJ_UINT32 tileno; 972 973 /** number of tile parts */ 974 OPJ_UINT32 nb_tps; 975 /** current nb of tile part (allocated)*/ 976 OPJ_UINT32 current_nb_tps; 977 /** current tile-part index */ 978 OPJ_UINT32 current_tpsno; 979 /** information concerning tile parts */ 980 opj_tp_index_t *tp_index; 981 982 /* UniPG>> */ /* NOT USED FOR THE MOMENT IN THE V2 VERSION */ 983 /** number of markers */ 984 OPJ_UINT32 marknum; 985 /** list of markers */ 986 opj_marker_info_t *marker; 987 /** actual size of markers array */ 988 OPJ_UINT32 maxmarknum; 989 /* <<UniPG */ 990 991 /** packet number */ 992 OPJ_UINT32 nb_packet; 993 /** information concerning packets inside tile */ 994 opj_packet_info_t *packet_index; 995 996 } opj_tile_index_t; 997 998 /** 999 * Index structure of the codestream (FIXME should be expand and enhance) 1000 */ 1001 typedef struct opj_codestream_index { 1002 /** main header start position (SOC position) */ 1003 OPJ_OFF_T main_head_start; 1004 /** main header end position (first SOT position) */ 1005 OPJ_OFF_T main_head_end; 1006 1007 /** codestream's size */ 1008 OPJ_UINT64 codestream_size; 1009 1010 /* UniPG>> */ /* NOT USED FOR THE MOMENT IN THE V2 VERSION */ 1011 /** number of markers */ 1012 OPJ_UINT32 marknum; 1013 /** list of markers */ 1014 opj_marker_info_t *marker; 1015 /** actual size of markers array */ 1016 OPJ_UINT32 maxmarknum; 1017 /* <<UniPG */ 1018 1019 /** */ 1020 OPJ_UINT32 nb_of_tiles; 1021 /** */ 1022 opj_tile_index_t *tile_index; /* FIXME not used for the moment */ 1023 1024 } opj_codestream_index_t; 1025 /* -----------------------------------------------------------> */ 1026 1027 /* 1028 ========================================================== 1029 Metadata from the JP2file 1030 ========================================================== 1031 */ 1032 1033 /** 1034 * Info structure of the JP2 file 1035 * EXPERIMENTAL FOR THE MOMENT 1036 */ 1037 typedef struct opj_jp2_metadata { 1038 /** */ 1039 OPJ_INT32 not_used; 1040 1041 } opj_jp2_metadata_t; 1042 1043 /** 1044 * Index structure of the JP2 file 1045 * EXPERIMENTAL FOR THE MOMENT 1046 */ 1047 typedef struct opj_jp2_index { 1048 /** */ 1049 OPJ_INT32 not_used; 1050 1051 } opj_jp2_index_t; 1052 1053 1054 #ifdef __cplusplus 1055 extern "C" { 1056 #endif 1057 1058 1059 /* 1060 ========================================================== 1061 openjpeg version 1062 ========================================================== 1063 */ 1064 1065 /* Get the version of the openjpeg library*/ 1066 OPJ_API const char * OPJ_CALLCONV opj_version(void); 1067 1068 /* 1069 ========================================================== 1070 image functions definitions 1071 ========================================================== 1072 */ 1073 1074 /** 1075 * Create an image 1076 * 1077 * @param numcmpts number of components 1078 * @param cmptparms components parameters 1079 * @param clrspc image color space 1080 * @return returns a new image structure if successful, returns NULL otherwise 1081 * */ 1082 OPJ_API opj_image_t* OPJ_CALLCONV opj_image_create(OPJ_UINT32 numcmpts, 1083 opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc); 1084 1085 /** 1086 * Deallocate any resources associated with an image 1087 * 1088 * @param image image to be destroyed 1089 */ 1090 OPJ_API void OPJ_CALLCONV opj_image_destroy(opj_image_t *image); 1091 1092 /** 1093 * Creates an image without allocating memory for the image (used in the new version of the library). 1094 * 1095 * @param numcmpts the number of components 1096 * @param cmptparms the components parameters 1097 * @param clrspc the image color space 1098 * 1099 * @return a new image structure if successful, NULL otherwise. 1100 */ 1101 OPJ_API opj_image_t* OPJ_CALLCONV opj_image_tile_create(OPJ_UINT32 numcmpts, 1102 opj_image_cmptparm_t *cmptparms, OPJ_COLOR_SPACE clrspc); 1103 1104 /** 1105 * Allocator for opj_image_t->comps[].data 1106 * To be paired with opj_image_data_free. 1107 * 1108 * @param size number of bytes to allocate 1109 * 1110 * @return a new pointer if successful, NULL otherwise. 1111 * @since 2.2.0 1112 */ 1113 OPJ_API void* OPJ_CALLCONV opj_image_data_alloc(OPJ_SIZE_T size); 1114 1115 /** 1116 * Destructor for opj_image_t->comps[].data 1117 * To be paired with opj_image_data_alloc. 1118 * 1119 * @param ptr Pointer to free 1120 * 1121 * @since 2.2.0 1122 */ 1123 OPJ_API void OPJ_CALLCONV opj_image_data_free(void* ptr); 1124 1125 /* 1126 ========================================================== 1127 stream functions definitions 1128 ========================================================== 1129 */ 1130 1131 /** 1132 * Creates an abstract stream. This function does nothing except allocating memory and initializing the abstract stream. 1133 * 1134 * @param p_is_input if set to true then the stream will be an input stream, an output stream else. 1135 * 1136 * @return a stream object. 1137 */ 1138 OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_default_create( 1139 OPJ_BOOL p_is_input); 1140 1141 /** 1142 * Creates an abstract stream. This function does nothing except allocating memory and initializing the abstract stream. 1143 * 1144 * @param p_buffer_size FIXME DOC 1145 * @param p_is_input if set to true then the stream will be an input stream, an output stream else. 1146 * 1147 * @return a stream object. 1148 */ 1149 OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create(OPJ_SIZE_T p_buffer_size, 1150 OPJ_BOOL p_is_input); 1151 1152 /** 1153 * Destroys a stream created by opj_create_stream. This function does NOT close the abstract stream. If needed the user must 1154 * close its own implementation of the stream. 1155 * 1156 * @param p_stream the stream to destroy. 1157 */ 1158 OPJ_API void OPJ_CALLCONV opj_stream_destroy(opj_stream_t* p_stream); 1159 1160 /** 1161 * Sets the given function to be used as a read function. 1162 * @param p_stream the stream to modify 1163 * @param p_function the function to use a read function. 1164 */ 1165 OPJ_API void OPJ_CALLCONV opj_stream_set_read_function(opj_stream_t* p_stream, 1166 opj_stream_read_fn p_function); 1167 1168 /** 1169 * Sets the given function to be used as a write function. 1170 * @param p_stream the stream to modify 1171 * @param p_function the function to use a write function. 1172 */ 1173 OPJ_API void OPJ_CALLCONV opj_stream_set_write_function(opj_stream_t* p_stream, 1174 opj_stream_write_fn p_function); 1175 1176 /** 1177 * Sets the given function to be used as a skip function. 1178 * @param p_stream the stream to modify 1179 * @param p_function the function to use a skip function. 1180 */ 1181 OPJ_API void OPJ_CALLCONV opj_stream_set_skip_function(opj_stream_t* p_stream, 1182 opj_stream_skip_fn p_function); 1183 1184 /** 1185 * Sets the given function to be used as a seek function, the stream is then seekable. 1186 * @param p_stream the stream to modify 1187 * @param p_function the function to use a skip function. 1188 */ 1189 OPJ_API void OPJ_CALLCONV opj_stream_set_seek_function(opj_stream_t* p_stream, 1190 opj_stream_seek_fn p_function); 1191 1192 /** 1193 * Sets the given data to be used as a user data for the stream. 1194 * @param p_stream the stream to modify 1195 * @param p_data the data to set. 1196 * @param p_function the function to free p_data when opj_stream_destroy() is called. 1197 */ 1198 OPJ_API void OPJ_CALLCONV opj_stream_set_user_data(opj_stream_t* p_stream, 1199 void * p_data, opj_stream_free_user_data_fn p_function); 1200 1201 /** 1202 * Sets the length of the user data for the stream. 1203 * 1204 * @param p_stream the stream to modify 1205 * @param data_length length of the user_data. 1206 */ 1207 OPJ_API void OPJ_CALLCONV opj_stream_set_user_data_length( 1208 opj_stream_t* p_stream, OPJ_UINT64 data_length); 1209 1210 /** 1211 * Create a stream from a file identified with its filename with default parameters (helper function) 1212 * @param fname the filename of the file to stream 1213 * @param p_is_read_stream whether the stream is a read stream (true) or not (false) 1214 */ 1215 OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_default_file_stream( 1216 const char *fname, OPJ_BOOL p_is_read_stream); 1217 1218 /** Create a stream from a file identified with its filename with a specific buffer size 1219 * @param fname the filename of the file to stream 1220 * @param p_buffer_size size of the chunk used to stream 1221 * @param p_is_read_stream whether the stream is a read stream (true) or not (false) 1222 */ 1223 OPJ_API opj_stream_t* OPJ_CALLCONV opj_stream_create_file_stream( 1224 const char *fname, 1225 OPJ_SIZE_T p_buffer_size, 1226 OPJ_BOOL p_is_read_stream); 1227 1228 /* 1229 ========================================================== 1230 event manager functions definitions 1231 ========================================================== 1232 */ 1233 /** 1234 * Set the info handler use by openjpeg. 1235 * @param p_codec the codec previously initialise 1236 * @param p_callback the callback function which will be used 1237 * @param p_user_data client object where will be returned the message 1238 */ 1239 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_info_handler(opj_codec_t * p_codec, 1240 opj_msg_callback p_callback, 1241 void * p_user_data); 1242 /** 1243 * Set the warning handler use by openjpeg. 1244 * @param p_codec the codec previously initialise 1245 * @param p_callback the callback function which will be used 1246 * @param p_user_data client object where will be returned the message 1247 */ 1248 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_warning_handler(opj_codec_t * p_codec, 1249 opj_msg_callback p_callback, 1250 void * p_user_data); 1251 /** 1252 * Set the error handler use by openjpeg. 1253 * @param p_codec the codec previously initialise 1254 * @param p_callback the callback function which will be used 1255 * @param p_user_data client object where will be returned the message 1256 */ 1257 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_error_handler(opj_codec_t * p_codec, 1258 opj_msg_callback p_callback, 1259 void * p_user_data); 1260 1261 /* 1262 ========================================================== 1263 codec functions definitions 1264 ========================================================== 1265 */ 1266 1267 /** 1268 * Creates a J2K/JP2 decompression structure 1269 * @param format Decoder to select 1270 * 1271 * @return Returns a handle to a decompressor if successful, returns NULL otherwise 1272 * */ 1273 OPJ_API opj_codec_t* OPJ_CALLCONV opj_create_decompress( 1274 OPJ_CODEC_FORMAT format); 1275 1276 /** 1277 * Destroy a decompressor handle 1278 * 1279 * @param p_codec decompressor handle to destroy 1280 */ 1281 OPJ_API void OPJ_CALLCONV opj_destroy_codec(opj_codec_t * p_codec); 1282 1283 /** 1284 * Read after the codestream if necessary 1285 * @param p_codec the JPEG2000 codec to read. 1286 * @param p_stream the JPEG2000 stream. 1287 */ 1288 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_end_decompress(opj_codec_t *p_codec, 1289 opj_stream_t *p_stream); 1290 1291 1292 /** 1293 * Set decoding parameters to default values 1294 * @param parameters Decompression parameters 1295 */ 1296 OPJ_API void OPJ_CALLCONV opj_set_default_decoder_parameters( 1297 opj_dparameters_t *parameters); 1298 1299 /** 1300 * Setup the decoder with decompression parameters provided by the user and with the message handler 1301 * provided by the user. 1302 * 1303 * @param p_codec decompressor handler 1304 * @param parameters decompression parameters 1305 * 1306 * @return true if the decoder is correctly set 1307 */ 1308 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_setup_decoder(opj_codec_t *p_codec, 1309 opj_dparameters_t *parameters); 1310 1311 /** 1312 * Allocates worker threads for the compressor/decompressor. 1313 * 1314 * By default, only the main thread is used. If this function is not used, 1315 * but the OPJ_NUM_THREADS environment variable is set, its value will be 1316 * used to initialize the number of threads. The value can be either an integer 1317 * number, or "ALL_CPUS". If OPJ_NUM_THREADS is set and this function is called, 1318 * this function will override the behaviour of the environment variable. 1319 * 1320 * Note: currently only has effect on the decompressor. 1321 * 1322 * @param p_codec decompressor handler 1323 * @param num_threads number of threads. 1324 * 1325 * @return OPJ_TRUE if the decoder is correctly set 1326 */ 1327 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_codec_set_threads(opj_codec_t *p_codec, 1328 int num_threads); 1329 1330 /** 1331 * Decodes an image header. 1332 * 1333 * @param p_stream the jpeg2000 stream. 1334 * @param p_codec the jpeg2000 codec to read. 1335 * @param p_image the image structure initialized with the characteristics of encoded image. 1336 * 1337 * @return true if the main header of the codestream and the JP2 header is correctly read. 1338 */ 1339 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_read_header(opj_stream_t *p_stream, 1340 opj_codec_t *p_codec, 1341 opj_image_t **p_image); 1342 1343 1344 /** Restrict the number of components to decode. 1345 * 1346 * This function should be called after opj_read_header(). 1347 * 1348 * This function enables to restrict the set of decoded components to the 1349 * specified indices. 1350 * Note that the current implementation (apply_color_transforms == OPJ_FALSE) 1351 * is such that neither the multi-component transform at codestream level, 1352 * nor JP2 channel transformations will be applied. 1353 * Consequently the indices are relative to the codestream. 1354 * 1355 * Note: opj_decode_tile_data() should not be used together with opj_set_decoded_components(). 1356 * 1357 * @param p_codec the jpeg2000 codec to read. 1358 * @param numcomps Size of the comps_indices array. 1359 * @param comps_indices Array of numcomps values representing the indices 1360 * of the components to decode (relative to the 1361 * codestream, starting at 0) 1362 * @param apply_color_transforms Whether multi-component transform at codestream level 1363 * or JP2 channel transformations should be applied. 1364 * Currently this parameter should be set to OPJ_FALSE. 1365 * Setting it to OPJ_TRUE will result in an error. 1366 * 1367 * @return OPJ_TRUE in case of success. 1368 */ 1369 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_decoded_components(opj_codec_t *p_codec, 1370 OPJ_UINT32 numcomps, 1371 const OPJ_UINT32* comps_indices, 1372 OPJ_BOOL apply_color_transforms); 1373 1374 /** 1375 * Sets the given area to be decoded. This function should be called right after opj_read_header and before any tile header reading. 1376 * 1377 * The coordinates passed to this function should be expressed in the reference grid, 1378 * that is to say at the highest resolution level, even if requesting the image at lower 1379 * resolution levels. 1380 * 1381 * Generally opj_set_decode_area() should be followed by opj_decode(), and the 1382 * codec cannot be re-used. 1383 * In the particular case of an image made of a single tile, several sequences of 1384 * calls to opoj_set_decode_area() and opj_decode() are allowed, and will bring 1385 * performance improvements when reading an image by chunks. 1386 * 1387 * @param p_codec the jpeg2000 codec. 1388 * @param p_image the decoded image previously setted by opj_read_header 1389 * @param p_start_x the left position of the rectangle to decode (in image coordinates). 1390 * @param p_end_x the right position of the rectangle to decode (in image coordinates). 1391 * @param p_start_y the up position of the rectangle to decode (in image coordinates). 1392 * @param p_end_y the bottom position of the rectangle to decode (in image coordinates). 1393 * 1394 * @return true if the area could be set. 1395 */ 1396 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_decode_area(opj_codec_t *p_codec, 1397 opj_image_t* p_image, 1398 OPJ_INT32 p_start_x, OPJ_INT32 p_start_y, 1399 OPJ_INT32 p_end_x, OPJ_INT32 p_end_y); 1400 1401 /** 1402 * Decode an image from a JPEG-2000 codestream 1403 * 1404 * @param p_decompressor decompressor handle 1405 * @param p_stream Input buffer stream 1406 * @param p_image the decoded image 1407 * @return true if success, otherwise false 1408 * */ 1409 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_decode(opj_codec_t *p_decompressor, 1410 opj_stream_t *p_stream, 1411 opj_image_t *p_image); 1412 1413 /** 1414 * Get the decoded tile from the codec 1415 * 1416 * @param p_codec the jpeg2000 codec. 1417 * @param p_stream input streamm 1418 * @param p_image output image 1419 * @param tile_index index of the tile which will be decode 1420 * 1421 * @return true if success, otherwise false 1422 */ 1423 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_get_decoded_tile(opj_codec_t *p_codec, 1424 opj_stream_t *p_stream, 1425 opj_image_t *p_image, 1426 OPJ_UINT32 tile_index); 1427 1428 /** 1429 * Set the resolution factor of the decoded image 1430 * @param p_codec the jpeg2000 codec. 1431 * @param res_factor resolution factor to set 1432 * 1433 * @return true if success, otherwise false 1434 */ 1435 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_decoded_resolution_factor( 1436 opj_codec_t *p_codec, OPJ_UINT32 res_factor); 1437 1438 /** 1439 * Writes a tile with the given data. 1440 * 1441 * @param p_codec the jpeg2000 codec. 1442 * @param p_tile_index the index of the tile to write. At the moment, the tiles must be written from 0 to n-1 in sequence. 1443 * @param p_data pointer to the data to write. Data is arranged in sequence, data_comp0, then data_comp1, then ... NO INTERLEAVING should be set. 1444 * @param p_data_size this value os used to make sure the data being written is correct. The size must be equal to the sum for each component of 1445 * tile_width * tile_height * component_size. component_size can be 1,2 or 4 bytes, depending on the precision of the given component. 1446 * @param p_stream the stream to write data to. 1447 * 1448 * @return true if the data could be written. 1449 */ 1450 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_write_tile(opj_codec_t *p_codec, 1451 OPJ_UINT32 p_tile_index, 1452 OPJ_BYTE * p_data, 1453 OPJ_UINT32 p_data_size, 1454 opj_stream_t *p_stream); 1455 1456 /** 1457 * Reads a tile header. This function is compulsory and allows one to know the size of the tile that will be decoded. 1458 * The user may need to refer to the image got by opj_read_header to understand the size being taken by the tile. 1459 * 1460 * @param p_codec the jpeg2000 codec. 1461 * @param p_tile_index pointer to a value that will hold the index of the tile being decoded, in case of success. 1462 * @param p_data_size pointer to a value that will hold the maximum size of the decoded data, in case of success. In case 1463 * of truncated codestreams, the actual number of bytes decoded may be lower. The computation of the size is the same 1464 * as depicted in opj_write_tile. 1465 * @param p_tile_x0 pointer to a value that will hold the x0 pos of the tile (in the image). 1466 * @param p_tile_y0 pointer to a value that will hold the y0 pos of the tile (in the image). 1467 * @param p_tile_x1 pointer to a value that will hold the x1 pos of the tile (in the image). 1468 * @param p_tile_y1 pointer to a value that will hold the y1 pos of the tile (in the image). 1469 * @param p_nb_comps pointer to a value that will hold the number of components in the tile. 1470 * @param p_should_go_on pointer to a boolean that will hold the fact that the decoding should go on. In case the 1471 * codestream is over at the time of the call, the value will be set to false. The user should then stop 1472 * the decoding. 1473 * @param p_stream the stream to decode. 1474 * @return true if the tile header could be decoded. In case the decoding should end, the returned value is still true. 1475 * returning false may be the result of a shortage of memory or an internal error. 1476 */ 1477 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_read_tile_header(opj_codec_t *p_codec, 1478 opj_stream_t * p_stream, 1479 OPJ_UINT32 * p_tile_index, 1480 OPJ_UINT32 * p_data_size, 1481 OPJ_INT32 * p_tile_x0, OPJ_INT32 * p_tile_y0, 1482 OPJ_INT32 * p_tile_x1, OPJ_INT32 * p_tile_y1, 1483 OPJ_UINT32 * p_nb_comps, 1484 OPJ_BOOL * p_should_go_on); 1485 1486 /** 1487 * Reads a tile data. This function is compulsory and allows one to decode tile data. opj_read_tile_header should be called before. 1488 * The user may need to refer to the image got by opj_read_header to understand the size being taken by the tile. 1489 * 1490 * Note: opj_decode_tile_data() should not be used together with opj_set_decoded_components(). 1491 * 1492 * @param p_codec the jpeg2000 codec. 1493 * @param p_tile_index the index of the tile being decoded, this should be the value set by opj_read_tile_header. 1494 * @param p_data pointer to a memory block that will hold the decoded data. 1495 * @param p_data_size size of p_data. p_data_size should be bigger or equal to the value set by opj_read_tile_header. 1496 * @param p_stream the stream to decode. 1497 * 1498 * @return true if the data could be decoded. 1499 */ 1500 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_decode_tile_data(opj_codec_t *p_codec, 1501 OPJ_UINT32 p_tile_index, 1502 OPJ_BYTE * p_data, 1503 OPJ_UINT32 p_data_size, 1504 opj_stream_t *p_stream); 1505 1506 /* COMPRESSION FUNCTIONS*/ 1507 1508 /** 1509 * Creates a J2K/JP2 compression structure 1510 * @param format Coder to select 1511 * @return Returns a handle to a compressor if successful, returns NULL otherwise 1512 */ 1513 OPJ_API opj_codec_t* OPJ_CALLCONV opj_create_compress(OPJ_CODEC_FORMAT format); 1514 1515 /** 1516 Set encoding parameters to default values, that means : 1517 <ul> 1518 <li>Lossless 1519 <li>1 tile 1520 <li>Size of precinct : 2^15 x 2^15 (means 1 precinct) 1521 <li>Size of code-block : 64 x 64 1522 <li>Number of resolutions: 6 1523 <li>No SOP marker in the codestream 1524 <li>No EPH marker in the codestream 1525 <li>No sub-sampling in x or y direction 1526 <li>No mode switch activated 1527 <li>Progression order: LRCP 1528 <li>No index file 1529 <li>No ROI upshifted 1530 <li>No offset of the origin of the image 1531 <li>No offset of the origin of the tiles 1532 <li>Reversible DWT 5-3 1533 </ul> 1534 @param parameters Compression parameters 1535 */ 1536 OPJ_API void OPJ_CALLCONV opj_set_default_encoder_parameters( 1537 opj_cparameters_t *parameters); 1538 1539 /** 1540 * Setup the encoder parameters using the current image and using user parameters. 1541 * @param p_codec Compressor handle 1542 * @param parameters Compression parameters 1543 * @param image Input filled image 1544 */ 1545 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_setup_encoder(opj_codec_t *p_codec, 1546 opj_cparameters_t *parameters, 1547 opj_image_t *image); 1548 1549 /** 1550 * Start to compress the current image. 1551 * @param p_codec Compressor handle 1552 * @param p_image Input filled image 1553 * @param p_stream Input stgream 1554 */ 1555 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_start_compress(opj_codec_t *p_codec, 1556 opj_image_t * p_image, 1557 opj_stream_t *p_stream); 1558 1559 /** 1560 * End to compress the current image. 1561 * @param p_codec Compressor handle 1562 * @param p_stream Input stgream 1563 */ 1564 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_end_compress(opj_codec_t *p_codec, 1565 opj_stream_t *p_stream); 1566 1567 /** 1568 * Encode an image into a JPEG-2000 codestream 1569 * @param p_codec compressor handle 1570 * @param p_stream Output buffer stream 1571 * 1572 * @return Returns true if successful, returns false otherwise 1573 */ 1574 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_encode(opj_codec_t *p_codec, 1575 opj_stream_t *p_stream); 1576 /* 1577 ========================================================== 1578 codec output functions definitions 1579 ========================================================== 1580 */ 1581 /* EXPERIMENTAL FUNCTIONS FOR NOW, USED ONLY IN J2K_DUMP*/ 1582 1583 /** 1584 Destroy Codestream information after compression or decompression 1585 @param cstr_info Codestream information structure 1586 */ 1587 OPJ_API void OPJ_CALLCONV opj_destroy_cstr_info(opj_codestream_info_v2_t 1588 **cstr_info); 1589 1590 1591 /** 1592 * Dump the codec information into the output stream 1593 * 1594 * @param p_codec the jpeg2000 codec. 1595 * @param info_flag type of information dump. 1596 * @param output_stream output stream where dump the information gotten from the codec. 1597 * 1598 */ 1599 OPJ_API void OPJ_CALLCONV opj_dump_codec(opj_codec_t *p_codec, 1600 OPJ_INT32 info_flag, 1601 FILE* output_stream); 1602 1603 /** 1604 * Get the codestream information from the codec 1605 * 1606 * @param p_codec the jpeg2000 codec. 1607 * 1608 * @return a pointer to a codestream information structure. 1609 * 1610 */ 1611 OPJ_API opj_codestream_info_v2_t* OPJ_CALLCONV opj_get_cstr_info( 1612 opj_codec_t *p_codec); 1613 1614 /** 1615 * Get the codestream index from the codec 1616 * 1617 * @param p_codec the jpeg2000 codec. 1618 * 1619 * @return a pointer to a codestream index structure. 1620 * 1621 */ 1622 OPJ_API opj_codestream_index_t * OPJ_CALLCONV opj_get_cstr_index( 1623 opj_codec_t *p_codec); 1624 1625 OPJ_API void OPJ_CALLCONV opj_destroy_cstr_index(opj_codestream_index_t 1626 **p_cstr_index); 1627 1628 1629 /** 1630 * Get the JP2 file information from the codec FIXME 1631 * 1632 * @param p_codec the jpeg2000 codec. 1633 * 1634 * @return a pointer to a JP2 metadata structure. 1635 * 1636 */ 1637 OPJ_API opj_jp2_metadata_t* OPJ_CALLCONV opj_get_jp2_metadata( 1638 opj_codec_t *p_codec); 1639 1640 /** 1641 * Get the JP2 file index from the codec FIXME 1642 * 1643 * @param p_codec the jpeg2000 codec. 1644 * 1645 * @return a pointer to a JP2 index structure. 1646 * 1647 */ 1648 OPJ_API opj_jp2_index_t* OPJ_CALLCONV opj_get_jp2_index(opj_codec_t *p_codec); 1649 1650 1651 /* 1652 ========================================================== 1653 MCT functions 1654 ========================================================== 1655 */ 1656 1657 /** 1658 * Sets the MCT matrix to use. 1659 * 1660 * @param parameters the parameters to change. 1661 * @param pEncodingMatrix the encoding matrix. 1662 * @param p_dc_shift the dc shift coefficients to use. 1663 * @param pNbComp the number of components of the image. 1664 * 1665 * @return true if the parameters could be set. 1666 */ 1667 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_set_MCT(opj_cparameters_t *parameters, 1668 OPJ_FLOAT32 * pEncodingMatrix, 1669 OPJ_INT32 * p_dc_shift, 1670 OPJ_UINT32 pNbComp); 1671 1672 /* 1673 ========================================================== 1674 Thread functions 1675 ========================================================== 1676 */ 1677 1678 /** Returns if the library is built with thread support. 1679 * OPJ_TRUE if mutex, condition, thread, thread pool are available. 1680 */ 1681 OPJ_API OPJ_BOOL OPJ_CALLCONV opj_has_thread_support(void); 1682 1683 /** Return the number of virtual CPUs */ 1684 OPJ_API int OPJ_CALLCONV opj_get_num_cpus(void); 1685 1686 1687 #ifdef __cplusplus 1688 } 1689 #endif 1690 1691 #endif /* OPENJPEG_H */ 1692