1 /** @file 2 Defines library APIs used by modules to save EFI Boot Script Opcodes. 3 These OpCode will be restored by S3 related modules. 4 Note that some of the API defined in the Library class may not 5 be provided in the Framework version library instance, which means some of these 6 APIs cannot be used if the underlying firmware is Framework and not PI. 7 8 Copyright (c) 2006 - 2014, Intel Corporation. All rights reserved.<BR> 9 10 This program and the accompanying materials 11 are licensed and made available under the terms and conditions 12 of the BSD License which accompanies this distribution. The 13 full text of the license may be found at 14 http://opensource.org/licenses/bsd-license.php 15 16 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, 17 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. 18 19 **/ 20 21 #ifndef _S3_BOOT_SCRIPT_LIB_H_ 22 #define _S3_BOOT_SCRIPT_LIB_H_ 23 24 #include <Library/BaseLib.h> 25 #include <IndustryStandard/SmBus.h> 26 27 /** 28 Macro that converts PCI Bus, PCI Device, PCI Function and PCI Register to an 29 address that can be passed to the S3 Boot Script Library PCI functions. 30 31 @param Bus PCI Bus number. Range 0..255. 32 @param Device PCI Device number. Range 0..31. 33 @param Function PCI Function number. Range 0..7. 34 @param Register PCI Register number. Range 0..255 for PCI. Range 0..4095 35 for PCI Express. 36 37 @return The encoded PCI address. 38 39 **/ 40 #define S3_BOOT_SCRIPT_LIB_PCI_ADDRESS(Bus,Device,Function,Register) \ 41 (UINT64) ( \ 42 (((UINTN) Bus) << 24) | \ 43 (((UINTN) Device) << 16) | \ 44 (((UINTN) Function) << 8) | \ 45 (((UINTN) (Register)) < 256 ? ((UINTN) (Register)) : (UINT64) (LShiftU64 ((UINT64) (Register), 32)))) 46 47 /// 48 /// S3 Boot Script Width. 49 /// 50 typedef enum { 51 S3BootScriptWidthUint8, ///< 8-bit operation. 52 S3BootScriptWidthUint16, ///< 16-bit operation. 53 S3BootScriptWidthUint32, ///< 32-bit operation. 54 S3BootScriptWidthUint64, ///< 64-bit operation. 55 S3BootScriptWidthFifoUint8, ///< 8-bit FIFO operation. 56 S3BootScriptWidthFifoUint16, ///< 16-bit FIFO operation. 57 S3BootScriptWidthFifoUint32, ///< 32-bit FIFO operation. 58 S3BootScriptWidthFifoUint64, ///< 64-bit FIFO operation. 59 S3BootScriptWidthFillUint8, ///< 8-bit Fill operation. 60 S3BootScriptWidthFillUint16, ///< 16-bit Fill operation. 61 S3BootScriptWidthFillUint32, ///< 32-bit Fill operation. 62 S3BootScriptWidthFillUint64, ///< 64-bit Fill operation. 63 S3BootScriptWidthMaximum 64 } S3_BOOT_SCRIPT_LIB_WIDTH; 65 66 /** 67 Save I/O write to boot script. 68 69 @param[in] Width The width of the I/O operations. 70 @param[in] Address The base address of the I/O operations. 71 @param[in] Count The number of I/O operations to perform. 72 @param[in] Buffer The source buffer from which to write data. 73 74 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 75 the operation. 76 @retval RETURN_SUCCESS The opcode was added. 77 78 **/ 79 RETURN_STATUS 80 EFIAPI 81 S3BootScriptSaveIoWrite ( 82 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 83 IN UINT64 Address, 84 IN UINTN Count, 85 IN VOID *Buffer 86 ); 87 88 /** 89 Adds a record for an I/O modify operation into a S3 boot script table. 90 91 @param[in] Width The width of the I/O operations. 92 @param[in] Address The base address of the I/O operations. 93 @param[in] Data A pointer to the data to be OR-ed. 94 @param[in] DataMask A pointer to the data mask to be AND-ed with the data 95 read from the register. 96 97 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 98 the operation. 99 @retval RETURN_SUCCESS The opcode was added. 100 101 **/ 102 RETURN_STATUS 103 EFIAPI 104 S3BootScriptSaveIoReadWrite ( 105 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 106 IN UINT64 Address, 107 IN VOID *Data, 108 IN VOID *DataMask 109 ); 110 111 /** 112 Adds a record for a memory write operation into a specified boot script table. 113 114 @param[in] Width The width of the I/O operations. 115 @param[in] Address The base address of the memory operations 116 @param[in] Count The number of memory operations to perform. 117 @param[in] Buffer The source buffer from which to write the data. 118 119 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 120 the operation. 121 @retval RETURN_SUCCESS The opcode was added. 122 **/ 123 RETURN_STATUS 124 EFIAPI 125 S3BootScriptSaveMemWrite ( 126 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 127 IN UINT64 Address, 128 IN UINTN Count, 129 IN VOID *Buffer 130 ); 131 132 /** 133 Adds a record for a memory modify operation into a specified boot script table. 134 135 @param[in] Width The width of the I/O operations. 136 @param[in] Address The base address of the memory operations. Address needs 137 alignment, if required 138 @param[in] Data A pointer to the data to be OR-ed. 139 @param[in] DataMask A pointer to the data mask to be AND-ed with the data 140 read from the register. 141 142 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 143 the operation. 144 @retval RETURN_SUCCESS The opcode was added. 145 **/ 146 RETURN_STATUS 147 EFIAPI 148 S3BootScriptSaveMemReadWrite ( 149 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 150 IN UINT64 Address, 151 IN VOID *Data, 152 IN VOID *DataMask 153 ); 154 155 /** 156 Adds a record for a PCI configuration space write operation into a specified boot script table. 157 158 @param[in] Width The width of the I/O operations. 159 @param[in] Address The address within the PCI configuration space. 160 @param[in] Count The number of PCI operations to perform. 161 @param[in] Buffer The source buffer from which to write the data. 162 163 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 164 the operation. 165 @retval RETURN_SUCCESS The opcode was added. 166 **/ 167 RETURN_STATUS 168 EFIAPI 169 S3BootScriptSavePciCfgWrite ( 170 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 171 IN UINT64 Address, 172 IN UINTN Count, 173 IN VOID *Buffer 174 ); 175 176 /** 177 Adds a record for a PCI configuration space modify operation into a specified boot script table. 178 179 @param[in] Width The width of the I/O operations. 180 @param[in] Address The address within the PCI configuration space. 181 @param[in] Data A pointer to the data to be OR-ed.The size depends on Width. 182 @param[in] DataMask A pointer to the data mask to be AND-ed. 183 184 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 185 the operation. 186 @retval RETURN__SUCCESS The opcode was added. 187 **/ 188 RETURN_STATUS 189 EFIAPI 190 S3BootScriptSavePciCfgReadWrite ( 191 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 192 IN UINT64 Address, 193 IN VOID *Data, 194 IN VOID *DataMask 195 ); 196 197 /** 198 Adds a record for a PCI configuration space modify operation into a specified boot script table. 199 200 @param[in] Width The width of the I/O operations. 201 @param[in] Segment The PCI segment number for Address. 202 @param[in] Address The address within the PCI configuration space. 203 @param[in] Count The number of PCI operations to perform. 204 @param[in] Buffer The source buffer from which to write the data. 205 206 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 207 the operation. 208 @retval RETURN_SUCCESS The opcode was added. 209 **/ 210 RETURN_STATUS 211 EFIAPI 212 S3BootScriptSavePciCfg2Write ( 213 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 214 IN UINT16 Segment, 215 IN UINT64 Address, 216 IN UINTN Count, 217 IN VOID *Buffer 218 ); 219 220 /** 221 Adds a record for a PCI configuration space modify operation into a specified boot script table. 222 223 @param[in] Width The width of the I/O operations. 224 @param[in] Segment The PCI segment number for Address. 225 @param[in] Address The address within the PCI configuration space. 226 @param[in] Data A pointer to the data to be OR-ed. The size depends on Width. 227 @param[in] DataMask A pointer to the data mask to be AND-ed. 228 229 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 230 the operation. 231 @retval RETURN_SUCCESS The opcode was added. 232 **/ 233 RETURN_STATUS 234 EFIAPI 235 S3BootScriptSavePciCfg2ReadWrite ( 236 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 237 IN UINT16 Segment, 238 IN UINT64 Address, 239 IN VOID *Data, 240 IN VOID *DataMask 241 ); 242 243 /** 244 Adds a record for an SMBus command execution into a specified boot script table. 245 246 @param[in] SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS 247 Command, SMBUS Data Length, and PEC. 248 @param[in] Operation Indicates which particular SMBus protocol it will use 249 to execute the SMBus transactions. 250 @param[in] Length A pointer to signify the number of bytes that this 251 operation will do. 252 @param[in] Buffer Contains the value of data to execute to the SMBUS 253 slave device. 254 255 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 256 the operation. 257 @retval RETURN_SUCCESS The opcode was added. 258 **/ 259 RETURN_STATUS 260 EFIAPI 261 S3BootScriptSaveSmbusExecute ( 262 IN UINTN SmBusAddress, 263 IN EFI_SMBUS_OPERATION Operation, 264 IN UINTN *Length, 265 IN VOID *Buffer 266 ); 267 268 /** 269 Adds a record for an execution stall on the processor into a specified boot script table. 270 271 @param[in] Duration The duration in microseconds of the stall. 272 273 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 274 the operation. 275 @retval RETURN_SUCCESS The opcode was added. 276 **/ 277 RETURN_STATUS 278 EFIAPI 279 S3BootScriptSaveStall ( 280 IN UINTN Duration 281 ); 282 283 /** 284 Adds a record for dispatching specified arbitrary code into a specified boot script table. 285 286 @param[in] EntryPoint The entry point of the code to be dispatched. 287 @param[in] Context The argument to be passed into the EntryPoint of the code 288 to be dispatched. 289 290 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 291 the operation. 292 @retval RETURN_SUCCESS The opcode was added. 293 **/ 294 RETURN_STATUS 295 EFIAPI 296 S3BootScriptSaveDispatch2 ( 297 IN VOID *EntryPoint, 298 IN VOID *Context 299 ); 300 301 /** 302 Adds a record for dispatching specified arbitrary code into a specified boot script table. 303 304 @param[in] EntryPoint The entry point of the code to be dispatched. 305 306 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 307 the operation. 308 @retval RETURN_SUCCESS The opcode was added. 309 **/ 310 RETURN_STATUS 311 EFIAPI 312 S3BootScriptSaveDispatch ( 313 IN VOID *EntryPoint 314 ); 315 316 /** 317 Adds a record for memory reads of the memory location and continues when the exit 318 criteria is satisfied, or after a defined duration. 319 320 Please aware, below interface is different with PI specification, Vol 5: 321 EFI_S3_SAVE_STATE_PROTOCOL.Write() for EFI_BOOT_SCRIPT_MEM_POLL_OPCODE. 322 "Duration" below is microseconds, while "Delay" in PI specification means 323 the number of 100ns units to poll. 324 325 @param[in] Width The width of the memory operations. 326 @param[in] Address The base address of the memory operations. 327 @param[in] BitMask A pointer to the bit mask to be AND-ed with the data read 328 from the register. 329 @param[in] BitValue A pointer to the data value after to be Masked. 330 @param[in] Duration The duration in microseconds of the stall. 331 @param[in] LoopTimes The times of the register polling. 332 333 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 334 the operation. 335 @retval RETURN_SUCCESS The opcode was added. 336 337 **/ 338 RETURN_STATUS 339 EFIAPI 340 S3BootScriptSaveMemPoll ( 341 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 342 IN UINT64 Address, 343 IN VOID *BitMask, 344 IN VOID *BitValue, 345 IN UINTN Duration, 346 IN UINT64 LoopTimes 347 ); 348 349 /** 350 Store arbitrary information in the boot script table. This opcode is a no-op on 351 dispatch and is only used for debugging script issues. 352 353 @param[in] InformationLength Length of the data in bytes 354 @param[in] Information Information to be logged in the boot scrpit 355 356 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 357 the operation. 358 @retval RETURN_SUCCESS The opcode was added. 359 360 **/ 361 RETURN_STATUS 362 EFIAPI 363 S3BootScriptSaveInformation ( 364 IN UINT32 InformationLength, 365 IN VOID *Information 366 ); 367 /** 368 Adds a record for I/O reads the I/O location and continues when the exit criteria 369 is satisfied, or after a defined duration. 370 371 @param Width The width of the I/O operations. 372 @param Address The base address of the I/O operations. 373 @param Data The comparison value used for the polling exit criteria. 374 @param DataMask The mask used for the polling criteria. The bits in 375 the bytes below Width which are zero in Data are 376 ignored when polling the memory address. 377 @param Delay The number of 100ns units to poll. Note that timer 378 available may be of insufficient granularity, so the 379 delay may be longer. 380 381 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform the 382 operation. 383 @retval RETURN_SUCCESS The opcode was added. 384 @note The FRAMEWORK version implementation does not support this API 385 **/ 386 RETURN_STATUS 387 EFIAPI 388 S3BootScriptSaveIoPoll ( 389 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 390 IN UINT64 Address, 391 IN VOID *Data, 392 IN VOID *DataMask, 393 IN UINT64 Delay 394 ); 395 396 /** 397 Adds a record for PCI configuration space reads and continues when the exit 398 criteria is satisfied ,or after a defined duration. 399 400 @param Width The width of the I/O operations. 401 @param Address The address within the PCI configuration space. 402 @param Data The comparison value used for the polling exit 403 criteria. 404 @param DataMask Mask used for the polling criteria. The bits in 405 the bytes below Width which are zero in Data are 406 ignored when polling the memory address. 407 @param Delay The number of 100ns units to poll. Note that timer 408 available may be of insufficient granularity, so the 409 delay may be longer. 410 411 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform the 412 operation. 413 @retval RETURN_SUCCESS The opcode was added. 414 @note The FRAMEWORK version implementation does not support this API 415 **/ 416 RETURN_STATUS 417 EFIAPI 418 S3BootScriptSavePciPoll ( 419 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 420 IN UINT64 Address, 421 IN VOID *Data, 422 IN VOID *DataMask, 423 IN UINT64 Delay 424 ); 425 /** 426 Adds a record for PCI configuration space reads and continues when the exit criteria 427 is satisfied, or after a defined duration. 428 429 @param Width The width of the I/O operations. 430 @param Segment The PCI segment number for Address. 431 @param Address The address within the PCI configuration space. 432 @param Data The comparison value used for the polling exit 433 criteria. 434 @param DataMask Mask used for the polling criteria. The bits in 435 the bytes below Width which are zero 436 in Data are ignored when polling the memory address 437 @param Delay The number of 100ns units to poll. Note that timer 438 available may be of insufficient granularity so the delay 439 may be longer. 440 441 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform the 442 operation. 443 @retval RETURN_SUCCESS The opcode was added. 444 @note A known Limitations in the implementation: When interpreting the opcode 445 EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE, EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE 446 and EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL_OPCODE, the 'Segment' parameter is assumed as 447 Zero, or else, assert. 448 The FRAMEWORK version implementation does not support this API. 449 450 **/ 451 RETURN_STATUS 452 EFIAPI 453 S3BootScriptSavePci2Poll ( 454 IN S3_BOOT_SCRIPT_LIB_WIDTH Width, 455 IN UINT16 Segment, 456 IN UINT64 Address, 457 IN VOID *Data, 458 IN VOID *DataMask, 459 IN UINT64 Delay 460 ); 461 /** 462 Save ASCII string information specified by Buffer to boot script with opcode 463 EFI_BOOT_SCRIPT_INFORMATION_OPCODE. 464 465 @param[in] String The Null-terminated ASCII string to store into the S3 boot 466 script table. 467 468 @retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform 469 the operation. 470 @retval RETURN_SUCCESS The opcode was added. 471 472 **/ 473 RETURN_STATUS 474 EFIAPI 475 S3BootScriptSaveInformationAsciiString ( 476 IN CONST CHAR8 *String 477 ); 478 479 /** 480 This is an function to close the S3 boot script table. The function could only 481 be called in BOOT time phase. To comply with the Framework spec definition on 482 EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable(), this function will fulfill following things: 483 1. Closes the specified boot script table 484 2. It allocates a new memory pool to duplicate all the boot scripts in the specified table. 485 Once this function is called, the table maintained by the library will be destroyed 486 after it is copied into the allocated pool. 487 3. Any attempts to add a script record after calling this function will cause a 488 new table to be created by the library. 489 4. The base address of the allocated pool will be returned in Address. Note that 490 after using the boot script table, the CALLER is responsible for freeing the 491 pool that is allocated by this function. 492 493 In Spec PI1.1, this EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable() is retired. This 494 API is supplied here to meet the requirements of the Framework Spec. 495 496 If anyone does call CloseTable() on a real platform, then the caller is responsible 497 for figuring out how to get the script to run on an S3 resume because the boot script 498 maintained by the lib will be destroyed. 499 500 @return the base address of the new copy of the boot script table. 501 502 **/ 503 UINT8* 504 EFIAPI 505 S3BootScriptCloseTable ( 506 VOID 507 ); 508 509 /** 510 Executes the S3 boot script table. 511 512 @retval RETURN_SUCCESS The boot script table was executed successfully. 513 @retval RETURN_UNSUPPORTED Invalid script table or opcode. 514 515 **/ 516 RETURN_STATUS 517 EFIAPI 518 S3BootScriptExecute ( 519 VOID 520 ); 521 /** 522 Move the last boot script entry to the position 523 524 @param BeforeOrAfter Specifies whether the opcode is stored before 525 (TRUE) or after (FALSE) the positionin the boot 526 script table specified by Position. If Position 527 is NULL or points to NULL then the new opcode is 528 inserted at the beginning of the table (if TRUE) 529 or end of the table (if FALSE). 530 @param Position On entry, specifies the position in the boot script 531 table where the opcode will be inserted, either 532 before or after, depending on BeforeOrAfter. On 533 exit, specifies the position of the inserted opcode 534 in the boot script table. 535 536 @retval RETURN_OUT_OF_RESOURCES The table is not available. 537 @retval RETURN_INVALID_PARAMETER The Position is not a valid position in the 538 boot script table. 539 @retval RETURN_SUCCESS The opcode was inserted. 540 @note The FRAMEWORK version implementation does not support this API. 541 **/ 542 RETURN_STATUS 543 EFIAPI 544 S3BootScriptMoveLastOpcode ( 545 IN BOOLEAN BeforeOrAfter, 546 IN OUT VOID **Position OPTIONAL 547 ); 548 /** 549 Find a label within the boot script table and, if not present, optionally create it. 550 551 @param BeforeOrAfter Specifies whether the opcode is stored before (TRUE) 552 or after (FALSE) the position in the boot script table 553 specified by Position. 554 @param CreateIfNotFound Specifies whether the label will be created if the 555 label does not exists (TRUE) or not (FALSE). 556 @param Position On entry, specifies the position in the boot script 557 table where the opcode will be inserted, either 558 before or after, depending on BeforeOrAfter. On exit, 559 specifies the positionof the inserted opcode in 560 the boot script table. 561 @param Label Points to the label which will be inserted in the 562 boot script table. 563 @retval EFI_SUCCESS The operation succeeded. A record was added into 564 the specified script table. 565 @retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script 566 is not supported. If the opcode is unknow or not 567 supported because of the PCD Feature Flags. 568 @retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script. 569 @note The FRAMEWORK version implementation does not support this API 570 571 **/ 572 RETURN_STATUS 573 EFIAPI 574 S3BootScriptLabel ( 575 IN BOOLEAN BeforeOrAfter, 576 IN BOOLEAN CreateIfNotFound, 577 IN OUT VOID **Position OPTIONAL, 578 IN CONST CHAR8 *Label 579 ); 580 /** 581 Compare two positions in the boot script table and return their relative position. 582 @param Position1 The positions in the boot script table to compare 583 @param Position2 The positions in the boot script table to compare 584 @param RelativePosition On return, points to the result of the comparison 585 586 @retval EFI_SUCCESS The operation succeeded. A record was added into the 587 specified script table. 588 @retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script 589 is not supported. If the opcode is unknow or not s 590 upported because of the PCD Feature Flags. 591 @retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script. 592 @note The FRAMEWORK version implementation does not support this API 593 **/ 594 RETURN_STATUS 595 EFIAPI 596 S3BootScriptCompare ( 597 IN UINT8 *Position1, 598 IN UINT8 *Position2, 599 OUT UINTN *RelativePosition 600 ); 601 602 #endif 603