• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
4  */
5 
6 #ifndef _LPC32XX_CPU_H
7 #define _LPC32XX_CPU_H
8 
9 /* LPC32XX Memory map */
10 
11 /* AHB physical base addresses */
12 #define SLC_NAND_BASE	0x20020000	/* SLC NAND Flash registers base    */
13 #define SSP0_BASE	0x20084000	/* SSP0 registers base              */
14 #define SD_CARD_BASE	0x20098000	/* SD card interface registers base */
15 #define MLC_NAND_BASE	0x200A8000	/* MLC NAND Flash registers base    */
16 #define DMA_BASE	0x31000000	/* DMA controller registers base    */
17 #define USB_BASE	0x31020000	/* USB registers base               */
18 #define LCD_BASE	0x31040000	/* LCD registers base               */
19 #define ETHERNET_BASE	0x31060000	/* Ethernet registers base          */
20 #define EMC_BASE	0x31080000	/* EMC configuration registers base */
21 
22 /* FAB peripherals base addresses */
23 #define CLK_PM_BASE	0x40004000	/* System control registers base    */
24 #define HS_UART1_BASE	0x40014000	/* High speed UART 1 registers base */
25 #define HS_UART2_BASE	0x40018000	/* High speed UART 2 registers base */
26 #define HS_UART7_BASE	0x4001C000	/* High speed UART 7 registers base */
27 #define RTC_BASE	0x40024000	/* RTC registers base               */
28 #define GPIO_BASE	0x40028000	/* GPIO registers base              */
29 #define MUX_BASE	0x40028000	/* MUX registers base               */
30 #define WDT_BASE	0x4003C000	/* Watchdog timer registers base    */
31 #define TIMER0_BASE	0x40044000	/* Timer0 registers base            */
32 #define TIMER1_BASE	0x4004C000	/* Timer1 registers base            */
33 #define UART_CTRL_BASE	0x40054000	/* UART control regsisters base     */
34 
35 /* APB peripherals base addresses */
36 #define UART3_BASE	0x40080000	/* UART 3 registers base            */
37 #define UART4_BASE	0x40088000	/* UART 4 registers base            */
38 #define UART5_BASE	0x40090000	/* UART 5 registers base            */
39 #define UART6_BASE	0x40098000	/* UART 6 registers base            */
40 #define I2C1_BASE	0x400A0000	/* I2C  1 registers base            */
41 #define I2C2_BASE	0x400A8000	/* I2C  2 registers base            */
42 
43 /* External SDRAM Memory Bank base addresses */
44 #define EMC_DYCS0_BASE	0x80000000	/* SDRAM DYCS0 base address         */
45 #define EMC_DYCS1_BASE	0xA0000000	/* SDRAM DYCS1 base address         */
46 
47 /* External Static Memory Bank base addresses */
48 #define EMC_CS0_BASE	0xE0000000
49 #define EMC_CS1_BASE	0xE1000000
50 #define EMC_CS2_BASE	0xE2000000
51 #define EMC_CS3_BASE	0xE3000000
52 
53 #endif /* _LPC32XX_CPU_H */
54