1 /** @file
2 PCH SPI Common Driver implements the SPI Host Controller Compatibility Interface.
3
4 Copyright (c) 2013-2015 Intel Corporation.
5
6 This program and the accompanying materials
7 are licensed and made available under the terms and conditions of the BSD License
8 which accompanies this distribution. The full text of the license may be found at
9 http://opensource.org/licenses/bsd-license.php
10
11 THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
12 WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
13
14 **/
15
16 #include "PchSpi.h"
17
18 VOID
FillOutPublicInfoStruct(SPI_INSTANCE * SpiInstance)19 FillOutPublicInfoStruct (
20 SPI_INSTANCE *SpiInstance
21 )
22 /*++
23
24 Routine Description:
25
26 Fillout SpiInstance->InitInfo;
27
28 Arguments:
29
30 SpiInstance - Pointer to SpiInstance to initialize
31
32 Returns:
33
34 NONE
35
36 --*/
37 {
38 UINT8 Index;
39
40 SpiInstance->InitInfo.InitTable = &SpiInstance->SpiInitTable;
41
42 //
43 // Give invalid index in case operation not supported.
44 //
45 SpiInstance->InitInfo.JedecIdOpcodeIndex = 0xff;
46 SpiInstance->InitInfo.OtherOpcodeIndex = 0xff;
47 SpiInstance->InitInfo.WriteStatusOpcodeIndex = 0xff;
48 SpiInstance->InitInfo.ProgramOpcodeIndex = 0xff;
49 SpiInstance->InitInfo.ReadOpcodeIndex = 0xff;
50 SpiInstance->InitInfo.EraseOpcodeIndex = 0xff;
51 SpiInstance->InitInfo.ReadStatusOpcodeIndex = 0xff;
52 SpiInstance->InitInfo.FullChipEraseOpcodeIndex = 0xff;
53 for (Index = 0; Index < SPI_NUM_OPCODE; Index++) {
54 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationJedecId) {
55 SpiInstance->InitInfo.JedecIdOpcodeIndex = Index;
56 }
57 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationOther) {
58 SpiInstance->InitInfo.OtherOpcodeIndex = Index;
59 }
60 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationWriteStatus) {
61 SpiInstance->InitInfo.WriteStatusOpcodeIndex = Index;
62 }
63 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationProgramData_1_Byte ||
64 SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationProgramData_64_Byte) {
65 SpiInstance->InitInfo.ProgramOpcodeIndex = Index;
66 }
67 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationReadData ||
68 SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationFastRead ||
69 SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationDualOutputFastRead) {
70 SpiInstance->InitInfo.ReadOpcodeIndex = Index;
71 }
72 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationErase_256_Byte ||
73 SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationErase_4K_Byte ||
74 SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationErase_8K_Byte ||
75 SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationErase_64K_Byte) {
76 SpiInstance->InitInfo.EraseOpcodeIndex = Index;
77 }
78 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationReadStatus) {
79 SpiInstance->InitInfo.ReadStatusOpcodeIndex = Index;
80 }
81 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationFullChipErase) {
82 SpiInstance->InitInfo.FullChipEraseOpcodeIndex = Index;
83 }
84 }
85 }
86
87 EFI_STATUS
SpiProtocolConstructor(SPI_INSTANCE * SpiInstance)88 SpiProtocolConstructor (
89 SPI_INSTANCE *SpiInstance
90 )
91 /*++
92
93 Routine Description:
94
95 Initialize an SPI protocol instance.
96 The function will assert in debug if PCH RCBA has not been initialized
97
98 Arguments:
99
100 SpiInstance - Pointer to SpiInstance to initialize
101
102 Returns:
103
104 EFI_SUCCESS The protocol instance was properly initialized
105 EFI_UNSUPPORTED The PCH is not supported by this module
106
107 --*/
108 {
109 SpiInstance->InitDone = FALSE; // Indicate NOT READY.
110
111 //
112 // Check if the current PCH is known and supported by this code
113 //
114 if (!IsQncSupported ()) {
115 DEBUG ((DEBUG_ERROR, "PCH SPI Protocol not supported due to no proper QNC LPC found!\n"));
116 return EFI_UNSUPPORTED;
117 }
118 //
119 // Initialize the SPI protocol instance
120 //
121 SpiInstance->Signature = PCH_SPI_PRIVATE_DATA_SIGNATURE;
122 SpiInstance->Handle = NULL;
123 SpiInstance->SpiProtocol.Init = SpiProtocolInit;
124 SpiInstance->SpiProtocol.Lock = SpiProtocolLock;
125 SpiInstance->SpiProtocol.Execute = SpiProtocolExecute;
126 SpiInstance->SpiProtocol.Info = SpiProtocolInfo;
127
128 //
129 // Sanity check to ensure PCH RCBA initialization has occurred previously.
130 //
131 SpiInstance->PchRootComplexBar = MmioRead32 (
132 PciDeviceMmBase (PCI_BUS_NUMBER_QNC,
133 PCI_DEVICE_NUMBER_QNC_LPC,
134 PCI_FUNCTION_NUMBER_QNC_LPC) + R_QNC_LPC_RCBA
135 ) & B_QNC_LPC_RCBA_MASK;
136 ASSERT (SpiInstance->PchRootComplexBar != 0);
137
138 return EFI_SUCCESS;
139 }
140
141 EFI_STATUS
142 EFIAPI
UnlockFlashComponents(IN EFI_SPI_PROTOCOL * This,IN UINT8 UnlockCmdOpcodeIndex)143 UnlockFlashComponents (
144 IN EFI_SPI_PROTOCOL *This,
145 IN UINT8 UnlockCmdOpcodeIndex
146 )
147 /*++
148
149 Routine Description:
150
151 Issue unlock command to disable block protection, this only needs to be done once per SPI power on
152
153 Arguments:
154
155 This A pointer to "EFI_SPI_PROTOCOL" for issuing commands
156 UnlockCmdOpcodeIndex The index of the Unlock command
157
158 Returns:
159
160 EFI_SUCCESS UnLock operation succeed.
161 EFI_DEVICE_ERROR Device error, operation failed.
162
163 --*/
164 {
165 EFI_STATUS Status;
166 SPI_INSTANCE *SpiInstance;
167 UINT8 SpiStatus;
168
169 if (UnlockCmdOpcodeIndex >= SPI_NUM_OPCODE) {
170 return EFI_UNSUPPORTED;
171 }
172
173 SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
174
175 //
176 // Issue unlock command to disable block protection, this only needs to be done once per SPI power on
177 //
178 SpiStatus = 0;
179 //
180 // Issue unlock command to the flash component 1 at first
181 //
182 Status = SpiProtocolExecute (
183 This,
184 UnlockCmdOpcodeIndex,
185 SpiInstance->SpiInitTable.PrefixOpcode[0] == PCH_SPI_COMMAND_WRITE_ENABLE ? 0 : 1,
186 TRUE,
187 TRUE,
188 TRUE,
189 (UINTN) 0,
190 sizeof (SpiStatus),
191 &SpiStatus,
192 EnumSpiRegionAll
193 );
194 if (EFI_ERROR (Status)) {
195 DEBUG ((EFI_D_ERROR, "Unlock flash component 1 fail!\n"));
196 return Status;
197 }
198
199 return EFI_SUCCESS;
200 }
201
202 EFI_STATUS
203 EFIAPI
SpiProtocolInit(IN EFI_SPI_PROTOCOL * This,IN SPI_INIT_TABLE * InitTable)204 SpiProtocolInit (
205 IN EFI_SPI_PROTOCOL *This,
206 IN SPI_INIT_TABLE *InitTable
207 )
208 /*++
209
210 Routine Description:
211
212 Initialize the host controller to execute SPI command.
213
214 Arguments:
215
216 This Pointer to the EFI_SPI_PROTOCOL instance.
217 InitTable Initialization data to be programmed into the SPI host controller.
218
219 Returns:
220
221 EFI_SUCCESS Initialization completed.
222 EFI_ACCESS_DENIED The SPI static configuration interface has been locked-down.
223 EFI_INVALID_PARAMETER Bad input parameters.
224 EFI_UNSUPPORTED Can't get Descriptor mode VSCC values
225 --*/
226 {
227 EFI_STATUS Status;
228 UINT8 Index;
229 UINT16 OpcodeType;
230 SPI_INSTANCE *SpiInstance;
231 UINTN PchRootComplexBar;
232 UINT8 UnlockCmdOpcodeIndex;
233 UINT8 FlashPartId[3];
234
235 SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
236 PchRootComplexBar = SpiInstance->PchRootComplexBar;
237
238 if (InitTable != NULL) {
239 //
240 // Copy table into SPI driver Private data structure
241 //
242 CopyMem (
243 &SpiInstance->SpiInitTable,
244 InitTable,
245 sizeof (SPI_INIT_TABLE)
246 );
247 } else {
248 return EFI_INVALID_PARAMETER;
249 }
250 //
251 // Check if the SPI interface has been locked-down.
252 //
253 if ((MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIS) & B_QNC_RCRB_SPIS_SCL) != 0) {
254 ASSERT_EFI_ERROR (EFI_ACCESS_DENIED);
255 return EFI_ACCESS_DENIED;
256 }
257 //
258 // Clear all the status bits for status regs.
259 //
260 MmioOr16 (
261 (UINTN) (PchRootComplexBar + R_QNC_RCRB_SPIS),
262 (UINT16) ((B_QNC_RCRB_SPIS_CDS | B_QNC_RCRB_SPIS_BAS))
263 );
264 MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIS);
265
266 //
267 // Set the Prefix Opcode registers.
268 //
269 MmioWrite16 (
270 PchRootComplexBar + R_QNC_RCRB_SPIPREOP,
271 (SpiInstance->SpiInitTable.PrefixOpcode[1] << 8) | InitTable->PrefixOpcode[0]
272 );
273 MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIPREOP);
274
275 //
276 // Set Opcode Type Configuration registers.
277 //
278 for (Index = 0, OpcodeType = 0; Index < SPI_NUM_OPCODE; Index++) {
279 switch (SpiInstance->SpiInitTable.OpcodeMenu[Index].Type) {
280 case EnumSpiOpcodeRead:
281 OpcodeType |= (UINT16) (B_QNC_RCRB_SPIOPTYPE_ADD_READ << (Index * 2));
282 break;
283 case EnumSpiOpcodeWrite:
284 OpcodeType |= (UINT16) (B_QNC_RCRB_SPIOPTYPE_ADD_WRITE << (Index * 2));
285 break;
286 case EnumSpiOpcodeWriteNoAddr:
287 OpcodeType |= (UINT16) (B_QNC_RCRB_SPIOPTYPE_NOADD_WRITE << (Index * 2));
288 break;
289 default:
290 OpcodeType |= (UINT16) (B_QNC_RCRB_SPIOPTYPE_NOADD_READ << (Index * 2));
291 break;
292 }
293 }
294 MmioWrite16 (PchRootComplexBar + R_QNC_RCRB_SPIOPTYPE, OpcodeType);
295 MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIOPTYPE);
296
297 //
298 // Setup the Opcode Menu registers.
299 //
300 UnlockCmdOpcodeIndex = SPI_NUM_OPCODE;
301 for (Index = 0; Index < SPI_NUM_OPCODE; Index++) {
302 MmioWrite8 (
303 PchRootComplexBar + R_QNC_RCRB_SPIOPMENU + Index,
304 SpiInstance->SpiInitTable.OpcodeMenu[Index].Code
305 );
306 MmioRead8 (PchRootComplexBar + R_QNC_RCRB_SPIOPMENU + Index);
307 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationJedecId) {
308 Status = SpiProtocolExecute (
309 This,
310 Index,
311 0,
312 TRUE,
313 TRUE,
314 FALSE,
315 (UINTN) 0,
316 3,
317 FlashPartId,
318 EnumSpiRegionDescriptor
319 );
320 if (EFI_ERROR (Status)) {
321 return Status;
322 }
323 if (FlashPartId[0] != SpiInstance->SpiInitTable.VendorId ||
324 FlashPartId[1] != SpiInstance->SpiInitTable.DeviceId0 ||
325 FlashPartId[2] != SpiInstance->SpiInitTable.DeviceId1) {
326 return EFI_INVALID_PARAMETER;
327 }
328 }
329
330 if (SpiInstance->SpiInitTable.OpcodeMenu[Index].Operation == EnumSpiOperationWriteStatus) {
331 UnlockCmdOpcodeIndex = Index;
332 }
333 }
334
335 Status = UnlockFlashComponents (
336 This,
337 UnlockCmdOpcodeIndex
338 );
339 if (EFI_ERROR (Status)) {
340 DEBUG ((EFI_D_ERROR, "Unlock flash components fail!\n"));
341 }
342
343 SpiPhaseInit ();
344 FillOutPublicInfoStruct (SpiInstance);
345 SpiInstance->InitDone = TRUE;
346 return EFI_SUCCESS;
347 }
348
349 EFI_STATUS
350 EFIAPI
SpiProtocolLock(IN EFI_SPI_PROTOCOL * This)351 SpiProtocolLock (
352 IN EFI_SPI_PROTOCOL *This
353 )
354 /*++
355
356 Routine Description:
357
358 Lock the SPI Static Configuration Interface.
359 Once locked, the interface can not be changed and can only be clear by system reset.
360
361 Arguments:
362
363 This Pointer to the EFI_SPI_PROTOCOL instance.
364
365 Returns:
366
367 EFI_SUCCESS Lock operation succeed.
368 EFI_DEVICE_ERROR Device error, operation failed.
369 EFI_ACCESS_DENIED The interface has already been locked.
370
371 --*/
372 {
373 SPI_INSTANCE *SpiInstance;
374 UINTN PchRootComplexBar;
375
376 SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
377 PchRootComplexBar = SpiInstance->PchRootComplexBar;
378
379 //
380 // Check if the SPI interface has been locked-down.
381 //
382 if ((MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIS) & B_QNC_RCRB_SPIS_SCL) != 0) {
383 return EFI_ACCESS_DENIED;
384 }
385
386 //
387 // Lock-down the configuration interface.
388 //
389 MmioOr16 ((UINTN) (PchRootComplexBar + R_QNC_RCRB_SPIS), (UINT16) (B_QNC_RCRB_SPIS_SCL));
390
391 //
392 // Verify if it's really locked.
393 //
394 if ((MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIS) & B_QNC_RCRB_SPIS_SCL) == 0) {
395 return EFI_DEVICE_ERROR;
396 } else {
397 //
398 // Save updated register in S3 Boot script.
399 //
400 S3BootScriptSaveMemWrite (
401 S3BootScriptWidthUint16,
402 (UINTN) (PchRootComplexBar + R_QNC_RCRB_SPIS),
403 1,
404 (VOID *) (UINTN) (PchRootComplexBar + R_QNC_RCRB_SPIS)
405 );
406 }
407
408 return EFI_SUCCESS;
409 }
410
411 EFI_STATUS
412 EFIAPI
SpiProtocolExecute(IN EFI_SPI_PROTOCOL * This,IN UINT8 OpcodeIndex,IN UINT8 PrefixOpcodeIndex,IN BOOLEAN DataCycle,IN BOOLEAN Atomic,IN BOOLEAN ShiftOut,IN UINTN Address,IN UINT32 DataByteCount,IN OUT UINT8 * Buffer,IN SPI_REGION_TYPE SpiRegionType)413 SpiProtocolExecute (
414 IN EFI_SPI_PROTOCOL *This,
415 IN UINT8 OpcodeIndex,
416 IN UINT8 PrefixOpcodeIndex,
417 IN BOOLEAN DataCycle,
418 IN BOOLEAN Atomic,
419 IN BOOLEAN ShiftOut,
420 IN UINTN Address,
421 IN UINT32 DataByteCount,
422 IN OUT UINT8 *Buffer,
423 IN SPI_REGION_TYPE SpiRegionType
424 )
425 /*++
426
427 Routine Description:
428
429 Execute SPI commands from the host controller.
430 This function would be called by runtime driver, please do not use any MMIO marco here
431
432 Arguments:
433
434 This Pointer to the EFI_SPI_PROTOCOL instance.
435 OpcodeIndex Index of the command in the OpCode Menu.
436 PrefixOpcodeIndex Index of the first command to run when in an atomic cycle sequence.
437 DataCycle TRUE if the SPI cycle contains data
438 Atomic TRUE if the SPI cycle is atomic and interleave cycles are not allowed.
439 ShiftOut If DataByteCount is not zero, TRUE to shift data out and FALSE to shift data in.
440 Address In Descriptor Mode, for Descriptor Region, GbE Region, ME Region and Platform
441 Region, this value specifies the offset from the Region Base; for BIOS Region,
442 this value specifies the offset from the start of the BIOS Image. In Non
443 Descriptor Mode, this value specifies the offset from the start of the BIOS Image.
444 Please note BIOS Image size may be smaller than BIOS Region size (in Descriptor
445 Mode) or the flash size (in Non Descriptor Mode), and in this case, BIOS Image is
446 supposed to be placed at the top end of the BIOS Region (in Descriptor Mode) or
447 the flash (in Non Descriptor Mode)
448 DataByteCount Number of bytes in the data portion of the SPI cycle. This function may break the
449 data transfer into multiple operations. This function ensures each operation does
450 not cross 256 byte flash address boundary.
451 *NOTE: if there is some SPI chip that has a stricter address boundary requirement
452 (e.g., its write page size is < 256 byte), then the caller cannot rely on this
453 function to cut the data transfer at proper address boundaries, and it's the
454 caller's reponsibility to pass in a properly cut DataByteCount parameter.
455 Buffer Pointer to caller-allocated buffer containing the dada received or sent during the
456 SPI cycle.
457 SpiRegionType SPI Region type. Values EnumSpiRegionBios, EnumSpiRegionGbE, EnumSpiRegionMe,
458 EnumSpiRegionDescriptor, and EnumSpiRegionPlatformData are only applicable in
459 Descriptor mode. Value EnumSpiRegionAll is applicable to both Descriptor Mode
460 and Non Descriptor Mode, which indicates "SpiRegionOffset" is actually relative
461 to base of the 1st flash device (i.e., it is a Flash Linear Address).
462
463 Returns:
464
465 EFI_SUCCESS Command succeed.
466 EFI_INVALID_PARAMETER The parameters specified are not valid.
467 EFI_UNSUPPORTED Command not supported.
468 EFI_DEVICE_ERROR Device error, command aborts abnormally.
469
470 --*/
471 {
472 EFI_STATUS Status;
473 UINT16 BiosCtlSave;
474 UINT32 SmiEnSave;
475
476 BiosCtlSave = 0;
477 SmiEnSave = 0;
478
479 //
480 // Check if the parameters are valid.
481 //
482 if ((OpcodeIndex >= SPI_NUM_OPCODE) || (PrefixOpcodeIndex >= SPI_NUM_PREFIX_OPCODE)) {
483 return EFI_INVALID_PARAMETER;
484 }
485 //
486 // Make sure it's safe to program the command.
487 //
488 if (!WaitForSpiCycleComplete (This, FALSE)) {
489 return EFI_DEVICE_ERROR;
490 }
491
492 //
493 // Acquire access to the SPI interface is not required any more.
494 //
495 //
496 // Disable SMIs to make sure normal mode flash access is not interrupted by an SMI
497 // whose SMI handler accesses flash (e.g. for error logging)
498 //
499 SmiEnSave = QNCPortRead (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC);
500 QNCPortWrite (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC, (SmiEnSave & ~SMI_EN));
501
502 //
503 // Save BIOS Ctrl register
504 //
505 BiosCtlSave = PciRead16 (
506 PCI_LIB_ADDRESS (PCI_BUS_NUMBER_QNC,
507 PCI_DEVICE_NUMBER_QNC_LPC,
508 PCI_FUNCTION_NUMBER_QNC_LPC,
509 R_QNC_LPC_BIOS_CNTL)
510 ) & (B_QNC_LPC_BIOS_CNTL_BCD | B_QNC_LPC_BIOS_CNTL_PFE | B_QNC_LPC_BIOS_CNTL_BIOSWE | B_QNC_LPC_BIOS_CNTL_SMM_BWP);
511
512 //
513 // Enable flash writing
514 //
515 PciOr16 (
516 PCI_LIB_ADDRESS (PCI_BUS_NUMBER_QNC,
517 PCI_DEVICE_NUMBER_QNC_LPC,
518 PCI_FUNCTION_NUMBER_QNC_LPC,
519 R_QNC_LPC_BIOS_CNTL),
520 (UINT16) (B_QNC_LPC_BIOS_CNTL_BIOSWE | B_QNC_LPC_BIOS_CNTL_SMM_BWP)
521 );
522
523 //
524 // If shifts the data out, disable Prefetching and Caching.
525 //
526 if (ShiftOut) {
527 PciAndThenOr16 (
528 PCI_LIB_ADDRESS (PCI_BUS_NUMBER_QNC,
529 PCI_DEVICE_NUMBER_QNC_LPC,
530 PCI_FUNCTION_NUMBER_QNC_LPC,
531 R_QNC_LPC_BIOS_CNTL),
532 (UINT16) (~(B_QNC_LPC_BIOS_CNTL_BCD | B_QNC_LPC_BIOS_CNTL_PFE)),
533 (UINT16) ((B_QNC_LPC_BIOS_CNTL_BCD))
534 );
535 }
536 //
537 // Sends the command to the SPI interface to execute.
538 //
539 Status = SendSpiCmd (
540 This,
541 OpcodeIndex,
542 PrefixOpcodeIndex,
543 DataCycle,
544 Atomic,
545 ShiftOut,
546 Address,
547 DataByteCount,
548 Buffer,
549 SpiRegionType
550 );
551
552 //
553 // Restore BIOS Ctrl register
554 //
555 PciAndThenOr16 (
556 PCI_LIB_ADDRESS (PCI_BUS_NUMBER_QNC,
557 PCI_DEVICE_NUMBER_QNC_LPC,
558 PCI_FUNCTION_NUMBER_QNC_LPC,
559 R_QNC_LPC_BIOS_CNTL),
560 (UINT16) (~(B_QNC_LPC_BIOS_CNTL_BCD | B_QNC_LPC_BIOS_CNTL_PFE | B_QNC_LPC_BIOS_CNTL_BIOSWE | B_QNC_LPC_BIOS_CNTL_SMM_BWP)),
561 (UINT16) (BiosCtlSave)
562 );
563 //
564 // Restore SMIs.
565 //
566 QNCPortWrite (QUARK_NC_HOST_BRIDGE_SB_PORT_ID, QNC_MSG_FSBIC_REG_HMISC, SmiEnSave);
567
568 return Status;
569 }
570
571 VOID
SpiOffset2Physical(IN EFI_SPI_PROTOCOL * This,IN UINTN SpiRegionOffset,IN SPI_REGION_TYPE SpiRegionType,OUT UINTN * HardwareSpiAddress,OUT UINTN * BaseAddress,OUT UINTN * LimitAddress)572 SpiOffset2Physical (
573 IN EFI_SPI_PROTOCOL *This,
574 IN UINTN SpiRegionOffset,
575 IN SPI_REGION_TYPE SpiRegionType,
576 OUT UINTN *HardwareSpiAddress,
577 OUT UINTN *BaseAddress,
578 OUT UINTN *LimitAddress
579 )
580 /*++
581
582 Routine Description:
583
584 Convert SPI offset to Physical address of SPI hardware
585
586 Arguments:
587
588 This Pointer to the EFI_SPI_PROTOCOL instance.
589 SpiRegionOffset In Descriptor Mode, for Descriptor Region, GbE Region, ME Region and Platform
590 Region, this value specifies the offset from the Region Base; for BIOS Region,
591 this value specifies the offset from the start of the BIOS Image. In Non
592 Descriptor Mode, this value specifies the offset from the start of the BIOS Image.
593 Please note BIOS Image size may be smaller than BIOS Region size (in Descriptor
594 Mode) or the flash size (in Non Descriptor Mode), and in this case, BIOS Image is
595 supposed to be placed at the top end of the BIOS Region (in Descriptor Mode) or
596 the flash (in Non Descriptor Mode)
597 BaseAddress Base Address of the region.
598 SpiRegionType SPI Region type. Values EnumSpiRegionBios, EnumSpiRegionGbE, EnumSpiRegionMe,
599 EnumSpiRegionDescriptor, and EnumSpiRegionPlatformData are only applicable in
600 Descriptor mode. Value EnumSpiRegionAll is applicable to both Descriptor Mode
601 and Non Descriptor Mode, which indicates "SpiRegionOffset" is actually relative
602 to base of the 1st flash device (i.e., it is a Flash Linear Address).
603 HardwareSpiAddress Return absolution SPI address (i.e., Flash Linear Address)
604 BaseAddress Return base address of the region type
605 LimitAddress Return limit address of the region type
606
607 Returns:
608
609 EFI_SUCCESS Command succeed.
610
611 --*/
612 {
613 SPI_INSTANCE *SpiInstance;
614
615 SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
616
617 if (SpiRegionType == EnumSpiRegionAll) {
618 //
619 // EnumSpiRegionAll indicates address is relative to flash device (i.e., address is Flash
620 // Linear Address)
621 //
622 *HardwareSpiAddress = SpiRegionOffset;
623 } else {
624 //
625 // Otherwise address is relative to BIOS image
626 //
627 *HardwareSpiAddress = SpiRegionOffset + SpiInstance->SpiInitTable.BiosStartOffset;
628 }
629 }
630
631 EFI_STATUS
SendSpiCmd(IN EFI_SPI_PROTOCOL * This,IN UINT8 OpcodeIndex,IN UINT8 PrefixOpcodeIndex,IN BOOLEAN DataCycle,IN BOOLEAN Atomic,IN BOOLEAN ShiftOut,IN UINTN Address,IN UINT32 DataByteCount,IN OUT UINT8 * Buffer,IN SPI_REGION_TYPE SpiRegionType)632 SendSpiCmd (
633 IN EFI_SPI_PROTOCOL *This,
634 IN UINT8 OpcodeIndex,
635 IN UINT8 PrefixOpcodeIndex,
636 IN BOOLEAN DataCycle,
637 IN BOOLEAN Atomic,
638 IN BOOLEAN ShiftOut,
639 IN UINTN Address,
640 IN UINT32 DataByteCount,
641 IN OUT UINT8 *Buffer,
642 IN SPI_REGION_TYPE SpiRegionType
643 )
644 /*++
645
646 Routine Description:
647
648 This function sends the programmed SPI command to the slave device.
649
650 Arguments:
651
652 OpcodeIndex Index of the command in the OpCode Menu.
653 PrefixOpcodeIndex Index of the first command to run when in an atomic cycle sequence.
654 DataCycle TRUE if the SPI cycle contains data
655 Atomic TRUE if the SPI cycle is atomic and interleave cycles are not allowed.
656 ShiftOut If DataByteCount is not zero, TRUE to shift data out and FALSE to shift data in.
657 Address In Descriptor Mode, for Descriptor Region, GbE Region, ME Region and Platform
658 Region, this value specifies the offset from the Region Base; for BIOS Region,
659 this value specifies the offset from the start of the BIOS Image. In Non
660 Descriptor Mode, this value specifies the offset from the start of the BIOS Image.
661 Please note BIOS Image size may be smaller than BIOS Region size (in Descriptor
662 Mode) or the flash size (in Non Descriptor Mode), and in this case, BIOS Image is
663 supposed to be placed at the top end of the BIOS Region (in Descriptor Mode) or
664 the flash (in Non Descriptor Mode)
665 DataByteCount Number of bytes in the data portion of the SPI cycle. This function may break the
666 data transfer into multiple operations. This function ensures each operation does
667 not cross 256 byte flash address boundary.
668 *NOTE: if there is some SPI chip that has a stricter address boundary requirement
669 (e.g., its write page size is < 256 byte), then the caller cannot rely on this
670 function to cut the data transfer at proper address boundaries, and it's the
671 caller's reponsibility to pass in a properly cut DataByteCount parameter.
672 Buffer Data received or sent during the SPI cycle.
673 SpiRegionType SPI Region type. Values EnumSpiRegionBios, EnumSpiRegionGbE, EnumSpiRegionMe,
674 EnumSpiRegionDescriptor, and EnumSpiRegionPlatformData are only applicable in
675 Descriptor mode. Value EnumSpiRegionAll is applicable to both Descriptor Mode
676 and Non Descriptor Mode, which indicates "SpiRegionOffset" is actually relative
677 to base of the 1st flash device (i.e., it is a Flash Linear Address).
678
679 Returns:
680
681 EFI_SUCCESS SPI command completes successfully.
682 EFI_DEVICE_ERROR Device error, the command aborts abnormally.
683 EFI_ACCESS_DENIED Some unrecognized command encountered in hardware sequencing mode
684 EFI_INVALID_PARAMETER The parameters specified are not valid.
685
686 --*/
687 {
688 UINT32 Index;
689 SPI_INSTANCE *SpiInstance;
690 UINTN HardwareSpiAddr;
691 UINTN SpiBiosSize;
692 UINTN BaseAddress;
693 UINTN LimitAddress;
694 UINT32 SpiDataCount;
695 UINT8 OpCode;
696 UINTN PchRootComplexBar;
697
698 SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
699 PchRootComplexBar = SpiInstance->PchRootComplexBar;
700 SpiBiosSize = SpiInstance->SpiInitTable.BiosSize;
701 OpCode = MmioRead8 (PchRootComplexBar + R_QNC_RCRB_SPIOPMENU + OpcodeIndex);
702
703 //
704 // Check if the value of opcode register is 0 or the BIOS Size of SpiInitTable is 0
705 //
706 if (OpCode == 0 || SpiBiosSize == 0) {
707 ASSERT (FALSE);
708 return EFI_INVALID_PARAMETER;
709 }
710
711 SpiOffset2Physical (This, Address, SpiRegionType, &HardwareSpiAddr, &BaseAddress, &LimitAddress);
712 //
713 // Have direct access to BIOS region in Descriptor mode,
714 //
715 if (SpiInstance->SpiInitTable.OpcodeMenu[OpcodeIndex].Type == EnumSpiOpcodeRead &&
716 SpiRegionType == EnumSpiRegionBios) {
717 CopyMem (
718 Buffer,
719 (UINT8 *) ((HardwareSpiAddr - BaseAddress) + (UINT32) (~(SpiBiosSize - 1))),
720 DataByteCount
721 );
722 return EFI_SUCCESS;
723 }
724 //
725 // DEBUG((EFI_D_ERROR, "SPIADDR %x, %x, %x, %x\n", Address, HardwareSpiAddr, BaseAddress,
726 // LimitAddress));
727 //
728 if ((DataCycle == FALSE) && (DataByteCount > 0)) {
729 DataByteCount = 0;
730 }
731
732 do {
733 //
734 // Trim at 256 byte boundary per operation,
735 // - PCH SPI controller requires trimming at 4KB boundary
736 // - Some SPI chips require trimming at 256 byte boundary for write operation
737 // - Trimming has limited performance impact as we can read / write atmost 64 byte
738 // per operation
739 //
740 if (HardwareSpiAddr + DataByteCount > ((HardwareSpiAddr + BIT8) &~(BIT8 - 1))) {
741 SpiDataCount = (((UINT32) (HardwareSpiAddr) + BIT8) &~(BIT8 - 1)) - (UINT32) (HardwareSpiAddr);
742 } else {
743 SpiDataCount = DataByteCount;
744 }
745 //
746 // Calculate the number of bytes to shift in/out during the SPI data cycle.
747 // Valid settings for the number of bytes duing each data portion of the
748 // PCH SPI cycles are: 0, 1, 2, 3, 4, 5, 6, 7, 8, 16, 24, 32, 40, 48, 56, 64
749 //
750 if (SpiDataCount >= 64) {
751 SpiDataCount = 64;
752 } else if ((SpiDataCount &~0x07) != 0) {
753 SpiDataCount = SpiDataCount &~0x07;
754 }
755 //
756 // If shifts data out, load data into the SPI data buffer.
757 //
758 if (ShiftOut) {
759 for (Index = 0; Index < SpiDataCount; Index++) {
760 MmioWrite8 (PchRootComplexBar + R_QNC_RCRB_SPID0 + Index, Buffer[Index]);
761 MmioRead8 (PchRootComplexBar + R_QNC_RCRB_SPID0 + Index);
762 }
763 }
764
765 MmioWrite32 (
766 (PchRootComplexBar + R_QNC_RCRB_SPIA),
767 (UINT32) (HardwareSpiAddr & B_QNC_RCRB_SPIA_MASK)
768 );
769 MmioRead32 (PchRootComplexBar + R_QNC_RCRB_SPIA);
770
771 //
772 // Execute the command on the SPI compatible mode
773 //
774
775 //
776 // Clear error flags
777 //
778 MmioOr16 ((PchRootComplexBar + R_QNC_RCRB_SPIS), B_QNC_RCRB_SPIS_BAS);
779
780 //
781 // Initialte the SPI cycle
782 //
783 if (DataCycle) {
784 MmioWrite16 (
785 (PchRootComplexBar + R_QNC_RCRB_SPIC),
786 ( (UINT16) (B_QNC_RCRB_SPIC_DC) | (UINT16) (((SpiDataCount - 1) << 8) & B_QNC_RCRB_SPIC_DBC) |
787 (UINT16) ((OpcodeIndex << 4) & B_QNC_RCRB_SPIC_COP) |
788 (UINT16) ((PrefixOpcodeIndex << 3) & B_QNC_RCRB_SPIC_SPOP) |
789 (UINT16) (Atomic ? B_QNC_RCRB_SPIC_ACS : 0) |
790 (UINT16) (B_QNC_RCRB_SPIC_SCGO)));
791 } else {
792 MmioWrite16 (
793 (PchRootComplexBar + R_QNC_RCRB_SPIC),
794 ( (UINT16) ((OpcodeIndex << 4) & B_QNC_RCRB_SPIC_COP) |
795 (UINT16) ((PrefixOpcodeIndex << 3) & B_QNC_RCRB_SPIC_SPOP) |
796 (UINT16) (Atomic ? B_QNC_RCRB_SPIC_ACS : 0) |
797 (UINT16) (B_QNC_RCRB_SPIC_SCGO)));
798 }
799
800 MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIC);
801
802 //
803 // end of command execution
804 //
805 // Wait the SPI cycle to complete.
806 //
807 if (!WaitForSpiCycleComplete (This, TRUE)) {
808 return EFI_DEVICE_ERROR;
809 }
810 //
811 // If shifts data in, get data from the SPI data buffer.
812 //
813 if (!ShiftOut) {
814 for (Index = 0; Index < SpiDataCount; Index++) {
815 Buffer[Index] = MmioRead8 (PchRootComplexBar + R_QNC_RCRB_SPID0 + Index);
816 }
817 }
818
819 HardwareSpiAddr += SpiDataCount;
820 Buffer += SpiDataCount;
821 DataByteCount -= SpiDataCount;
822 } while (DataByteCount > 0);
823
824 return EFI_SUCCESS;
825 }
826
827 BOOLEAN
WaitForSpiCycleComplete(IN EFI_SPI_PROTOCOL * This,IN BOOLEAN ErrorCheck)828 WaitForSpiCycleComplete (
829 IN EFI_SPI_PROTOCOL *This,
830 IN BOOLEAN ErrorCheck
831 )
832 /*++
833
834 Routine Description:
835
836 Wait execution cycle to complete on the SPI interface. Check both Hardware
837 and Software Sequencing status registers
838
839 Arguments:
840
841 This - The SPI protocol instance
842 UseSoftwareSequence - TRUE if this is a Hardware Sequencing operation
843 ErrorCheck - TRUE if the SpiCycle needs to do the error check
844
845 Returns:
846
847 TRUE SPI cycle completed on the interface.
848 FALSE Time out while waiting the SPI cycle to complete.
849 It's not safe to program the next command on the SPI interface.
850
851 --*/
852 {
853 UINT64 WaitTicks;
854 UINT64 WaitCount;
855 UINT16 Data16;
856 SPI_INSTANCE *SpiInstance;
857 UINTN PchRootComplexBar;
858
859 SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
860 PchRootComplexBar = SpiInstance->PchRootComplexBar;
861
862 //
863 // Convert the wait period allowed into to tick count
864 //
865 WaitCount = WAIT_TIME / WAIT_PERIOD;
866
867 //
868 // Wait for the SPI cycle to complete.
869 //
870 for (WaitTicks = 0; WaitTicks < WaitCount; WaitTicks++) {
871 Data16 = MmioRead16 (PchRootComplexBar + R_QNC_RCRB_SPIS);
872 if ((Data16 & B_QNC_RCRB_SPIS_SCIP) == 0) {
873 MmioWrite16 (PchRootComplexBar + R_QNC_RCRB_SPIS, (B_QNC_RCRB_SPIS_BAS | B_QNC_RCRB_SPIS_CDS));
874 if ((Data16 & B_QNC_RCRB_SPIS_BAS) && (ErrorCheck == TRUE)) {
875 return FALSE;
876 } else {
877 return TRUE;
878 }
879 }
880
881 MicroSecondDelay (WAIT_PERIOD);
882 }
883
884 return FALSE;
885 }
886
887 EFI_STATUS
888 EFIAPI
SpiProtocolInfo(IN EFI_SPI_PROTOCOL * This,OUT SPI_INIT_INFO ** InitInfoPtr)889 SpiProtocolInfo (
890 IN EFI_SPI_PROTOCOL *This,
891 OUT SPI_INIT_INFO **InitInfoPtr
892 )
893 /*++
894
895 Routine Description:
896
897 Return info about SPI host controller, to help callers usage of Execute
898 service.
899
900 If 0xff is returned as an opcode index in init info struct
901 then device does not support the operation.
902
903 Arguments:
904
905 This Pointer to the EFI_SPI_PROTOCOL instance.
906 InitInfoPtr Pointer to init info written to this memory location.
907
908 Returns:
909
910 EFI_SUCCESS Information returned.
911 EFI_INVALID_PARAMETER Invalid parameter.
912 EFI_NOT_READY Required resources not setup.
913 Others Unexpected error happened.
914
915 --*/
916 {
917 SPI_INSTANCE *SpiInstance;
918
919 if (This == NULL || InitInfoPtr == NULL) {
920 return EFI_INVALID_PARAMETER;
921 }
922 SpiInstance = SPI_INSTANCE_FROM_SPIPROTOCOL (This);
923 if (SpiInstance->Signature != PCH_SPI_PRIVATE_DATA_SIGNATURE) {
924 return EFI_INVALID_PARAMETER;
925 }
926
927 if (!SpiInstance->InitDone) {
928 *InitInfoPtr = NULL;
929 return EFI_NOT_READY;
930 }
931 *InitInfoPtr = &SpiInstance->InitInfo;
932 return EFI_SUCCESS;
933 }
934