1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * (C) Copyright 2000-2003
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 *
6 * Copyright (C) 2004-2009, 2015 Freescale Semiconductor, Inc.
7 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
8 * Chao Fu (B44548@freescale.com)
9 * Haikun Wang (B53464@freescale.com)
10 */
11
12 #include <common.h>
13 #include <dm.h>
14 #include <errno.h>
15 #include <common.h>
16 #include <spi.h>
17 #include <malloc.h>
18 #include <asm/io.h>
19 #include <fdtdec.h>
20 #ifndef CONFIG_M68K
21 #include <asm/arch/clock.h>
22 #endif
23 #include <fsl_dspi.h>
24
25 DECLARE_GLOBAL_DATA_PTR;
26
27 /* fsl_dspi_platdata flags */
28 #define DSPI_FLAG_REGMAP_ENDIAN_BIG BIT(0)
29
30 /* idle data value */
31 #define DSPI_IDLE_VAL 0x0
32
33 /* max chipselect signals number */
34 #define FSL_DSPI_MAX_CHIPSELECT 6
35
36 /* default SCK frequency, unit: HZ */
37 #define FSL_DSPI_DEFAULT_SCK_FREQ 10000000
38
39 /* tx/rx data wait timeout value, unit: us */
40 #define DSPI_TXRX_WAIT_TIMEOUT 1000000
41
42 /* CTAR register pre-configure value */
43 #define DSPI_CTAR_DEFAULT_VALUE (DSPI_CTAR_TRSZ(7) | \
44 DSPI_CTAR_PCSSCK_1CLK | \
45 DSPI_CTAR_PASC(0) | \
46 DSPI_CTAR_PDT(0) | \
47 DSPI_CTAR_CSSCK(0) | \
48 DSPI_CTAR_ASC(0) | \
49 DSPI_CTAR_DT(0))
50
51 /* CTAR register pre-configure mask */
52 #define DSPI_CTAR_SET_MODE_MASK (DSPI_CTAR_TRSZ(15) | \
53 DSPI_CTAR_PCSSCK(3) | \
54 DSPI_CTAR_PASC(3) | \
55 DSPI_CTAR_PDT(3) | \
56 DSPI_CTAR_CSSCK(15) | \
57 DSPI_CTAR_ASC(15) | \
58 DSPI_CTAR_DT(15))
59
60 /**
61 * struct fsl_dspi_platdata - platform data for Freescale DSPI
62 *
63 * @flags: Flags for DSPI DSPI_FLAG_...
64 * @speed_hz: Default SCK frequency
65 * @num_chipselect: Number of DSPI chipselect signals
66 * @regs_addr: Base address of DSPI registers
67 */
68 struct fsl_dspi_platdata {
69 uint flags;
70 uint speed_hz;
71 uint num_chipselect;
72 fdt_addr_t regs_addr;
73 };
74
75 /**
76 * struct fsl_dspi_priv - private data for Freescale DSPI
77 *
78 * @flags: Flags for DSPI DSPI_FLAG_...
79 * @mode: SPI mode to use for slave device (see SPI mode flags)
80 * @mcr_val: MCR register configure value
81 * @bus_clk: DSPI input clk frequency
82 * @speed_hz: Default SCK frequency
83 * @charbit: How many bits in every transfer
84 * @num_chipselect: Number of DSPI chipselect signals
85 * @ctar_val: CTAR register configure value of per chipselect slave device
86 * @regs: Point to DSPI register structure for I/O access
87 */
88 struct fsl_dspi_priv {
89 uint flags;
90 uint mode;
91 uint mcr_val;
92 uint bus_clk;
93 uint speed_hz;
94 uint charbit;
95 uint num_chipselect;
96 uint ctar_val[FSL_DSPI_MAX_CHIPSELECT];
97 struct dspi *regs;
98 };
99
100 #ifndef CONFIG_DM_SPI
101 struct fsl_dspi {
102 struct spi_slave slave;
103 struct fsl_dspi_priv priv;
104 };
105 #endif
106
cpu_dspi_port_conf(void)107 __weak void cpu_dspi_port_conf(void)
108 {
109 }
110
cpu_dspi_claim_bus(uint bus,uint cs)111 __weak int cpu_dspi_claim_bus(uint bus, uint cs)
112 {
113 return 0;
114 }
115
cpu_dspi_release_bus(uint bus,uint cs)116 __weak void cpu_dspi_release_bus(uint bus, uint cs)
117 {
118 }
119
dspi_read32(uint flags,uint * addr)120 static uint dspi_read32(uint flags, uint *addr)
121 {
122 return flags & DSPI_FLAG_REGMAP_ENDIAN_BIG ?
123 in_be32(addr) : in_le32(addr);
124 }
125
dspi_write32(uint flags,uint * addr,uint val)126 static void dspi_write32(uint flags, uint *addr, uint val)
127 {
128 flags & DSPI_FLAG_REGMAP_ENDIAN_BIG ?
129 out_be32(addr, val) : out_le32(addr, val);
130 }
131
dspi_halt(struct fsl_dspi_priv * priv,u8 halt)132 static void dspi_halt(struct fsl_dspi_priv *priv, u8 halt)
133 {
134 uint mcr_val;
135
136 mcr_val = dspi_read32(priv->flags, &priv->regs->mcr);
137
138 if (halt)
139 mcr_val |= DSPI_MCR_HALT;
140 else
141 mcr_val &= ~DSPI_MCR_HALT;
142
143 dspi_write32(priv->flags, &priv->regs->mcr, mcr_val);
144 }
145
fsl_dspi_init_mcr(struct fsl_dspi_priv * priv,uint cfg_val)146 static void fsl_dspi_init_mcr(struct fsl_dspi_priv *priv, uint cfg_val)
147 {
148 /* halt DSPI module */
149 dspi_halt(priv, 1);
150
151 dspi_write32(priv->flags, &priv->regs->mcr, cfg_val);
152
153 /* resume module */
154 dspi_halt(priv, 0);
155
156 priv->mcr_val = cfg_val;
157 }
158
fsl_dspi_cfg_cs_active_state(struct fsl_dspi_priv * priv,uint cs,uint state)159 static void fsl_dspi_cfg_cs_active_state(struct fsl_dspi_priv *priv,
160 uint cs, uint state)
161 {
162 uint mcr_val;
163
164 dspi_halt(priv, 1);
165
166 mcr_val = dspi_read32(priv->flags, &priv->regs->mcr);
167 if (state & SPI_CS_HIGH)
168 /* CSx inactive state is low */
169 mcr_val &= ~DSPI_MCR_PCSIS(cs);
170 else
171 /* CSx inactive state is high */
172 mcr_val |= DSPI_MCR_PCSIS(cs);
173 dspi_write32(priv->flags, &priv->regs->mcr, mcr_val);
174
175 dspi_halt(priv, 0);
176 }
177
fsl_dspi_cfg_ctar_mode(struct fsl_dspi_priv * priv,uint cs,uint mode)178 static int fsl_dspi_cfg_ctar_mode(struct fsl_dspi_priv *priv,
179 uint cs, uint mode)
180 {
181 uint bus_setup;
182
183 bus_setup = dspi_read32(priv->flags, &priv->regs->ctar[0]);
184
185 bus_setup &= ~DSPI_CTAR_SET_MODE_MASK;
186 bus_setup |= priv->ctar_val[cs];
187 bus_setup &= ~(DSPI_CTAR_CPOL | DSPI_CTAR_CPHA | DSPI_CTAR_LSBFE);
188
189 if (mode & SPI_CPOL)
190 bus_setup |= DSPI_CTAR_CPOL;
191 if (mode & SPI_CPHA)
192 bus_setup |= DSPI_CTAR_CPHA;
193 if (mode & SPI_LSB_FIRST)
194 bus_setup |= DSPI_CTAR_LSBFE;
195
196 dspi_write32(priv->flags, &priv->regs->ctar[0], bus_setup);
197
198 priv->charbit =
199 ((dspi_read32(priv->flags, &priv->regs->ctar[0]) &
200 DSPI_CTAR_TRSZ(15)) == DSPI_CTAR_TRSZ(15)) ? 16 : 8;
201
202 return 0;
203 }
204
fsl_dspi_clr_fifo(struct fsl_dspi_priv * priv)205 static void fsl_dspi_clr_fifo(struct fsl_dspi_priv *priv)
206 {
207 uint mcr_val;
208
209 dspi_halt(priv, 1);
210 mcr_val = dspi_read32(priv->flags, &priv->regs->mcr);
211 /* flush RX and TX FIFO */
212 mcr_val |= (DSPI_MCR_CTXF | DSPI_MCR_CRXF);
213 dspi_write32(priv->flags, &priv->regs->mcr, mcr_val);
214 dspi_halt(priv, 0);
215 }
216
dspi_tx(struct fsl_dspi_priv * priv,u32 ctrl,u16 data)217 static void dspi_tx(struct fsl_dspi_priv *priv, u32 ctrl, u16 data)
218 {
219 int timeout = DSPI_TXRX_WAIT_TIMEOUT;
220
221 /* wait for empty entries in TXFIFO or timeout */
222 while (DSPI_SR_TXCTR(dspi_read32(priv->flags, &priv->regs->sr)) >= 4 &&
223 timeout--)
224 udelay(1);
225
226 if (timeout >= 0)
227 dspi_write32(priv->flags, &priv->regs->tfr, (ctrl | data));
228 else
229 debug("dspi_tx: waiting timeout!\n");
230 }
231
dspi_rx(struct fsl_dspi_priv * priv)232 static u16 dspi_rx(struct fsl_dspi_priv *priv)
233 {
234 int timeout = DSPI_TXRX_WAIT_TIMEOUT;
235
236 /* wait for valid entries in RXFIFO or timeout */
237 while (DSPI_SR_RXCTR(dspi_read32(priv->flags, &priv->regs->sr)) == 0 &&
238 timeout--)
239 udelay(1);
240
241 if (timeout >= 0)
242 return (u16)DSPI_RFR_RXDATA(
243 dspi_read32(priv->flags, &priv->regs->rfr));
244 else {
245 debug("dspi_rx: waiting timeout!\n");
246 return (u16)(~0);
247 }
248 }
249
dspi_xfer(struct fsl_dspi_priv * priv,uint cs,unsigned int bitlen,const void * dout,void * din,unsigned long flags)250 static int dspi_xfer(struct fsl_dspi_priv *priv, uint cs, unsigned int bitlen,
251 const void *dout, void *din, unsigned long flags)
252 {
253 u16 *spi_rd16 = NULL, *spi_wr16 = NULL;
254 u8 *spi_rd = NULL, *spi_wr = NULL;
255 static u32 ctrl;
256 uint len = bitlen >> 3;
257
258 if (priv->charbit == 16) {
259 bitlen >>= 1;
260 spi_wr16 = (u16 *)dout;
261 spi_rd16 = (u16 *)din;
262 } else {
263 spi_wr = (u8 *)dout;
264 spi_rd = (u8 *)din;
265 }
266
267 if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN)
268 ctrl |= DSPI_TFR_CONT;
269
270 ctrl = ctrl & DSPI_TFR_CONT;
271 ctrl = ctrl | DSPI_TFR_CTAS(0) | DSPI_TFR_PCS(cs);
272
273 if (len > 1) {
274 int tmp_len = len - 1;
275 while (tmp_len--) {
276 if (dout != NULL) {
277 if (priv->charbit == 16)
278 dspi_tx(priv, ctrl, *spi_wr16++);
279 else
280 dspi_tx(priv, ctrl, *spi_wr++);
281 dspi_rx(priv);
282 }
283
284 if (din != NULL) {
285 dspi_tx(priv, ctrl, DSPI_IDLE_VAL);
286 if (priv->charbit == 16)
287 *spi_rd16++ = dspi_rx(priv);
288 else
289 *spi_rd++ = dspi_rx(priv);
290 }
291 }
292
293 len = 1; /* remaining byte */
294 }
295
296 if ((flags & SPI_XFER_END) == SPI_XFER_END)
297 ctrl &= ~DSPI_TFR_CONT;
298
299 if (len) {
300 if (dout != NULL) {
301 if (priv->charbit == 16)
302 dspi_tx(priv, ctrl, *spi_wr16);
303 else
304 dspi_tx(priv, ctrl, *spi_wr);
305 dspi_rx(priv);
306 }
307
308 if (din != NULL) {
309 dspi_tx(priv, ctrl, DSPI_IDLE_VAL);
310 if (priv->charbit == 16)
311 *spi_rd16 = dspi_rx(priv);
312 else
313 *spi_rd = dspi_rx(priv);
314 }
315 } else {
316 /* dummy read */
317 dspi_tx(priv, ctrl, DSPI_IDLE_VAL);
318 dspi_rx(priv);
319 }
320
321 return 0;
322 }
323
324 /**
325 * Calculate the divide value between input clk frequency and expected SCK frequency
326 * Formula: SCK = (clkrate/pbr) x ((1+dbr)/br)
327 * Dbr: use default value 0
328 *
329 * @pbr: return Baud Rate Prescaler value
330 * @br: return Baud Rate Scaler value
331 * @speed_hz: expected SCK frequency
332 * @clkrate: input clk frequency
333 */
fsl_dspi_hz_to_spi_baud(int * pbr,int * br,int speed_hz,uint clkrate)334 static int fsl_dspi_hz_to_spi_baud(int *pbr, int *br,
335 int speed_hz, uint clkrate)
336 {
337 /* Valid baud rate pre-scaler values */
338 int pbr_tbl[4] = {2, 3, 5, 7};
339 int brs[16] = {2, 4, 6, 8,
340 16, 32, 64, 128,
341 256, 512, 1024, 2048,
342 4096, 8192, 16384, 32768};
343 int temp, i = 0, j = 0;
344
345 temp = clkrate / speed_hz;
346
347 for (i = 0; i < ARRAY_SIZE(pbr_tbl); i++)
348 for (j = 0; j < ARRAY_SIZE(brs); j++) {
349 if (pbr_tbl[i] * brs[j] >= temp) {
350 *pbr = i;
351 *br = j;
352 return 0;
353 }
354 }
355
356 debug("Can not find valid baud rate,speed_hz is %d, ", speed_hz);
357 debug("clkrate is %d, we use the max prescaler value.\n", clkrate);
358
359 *pbr = ARRAY_SIZE(pbr_tbl) - 1;
360 *br = ARRAY_SIZE(brs) - 1;
361 return -EINVAL;
362 }
363
fsl_dspi_cfg_speed(struct fsl_dspi_priv * priv,uint speed)364 static int fsl_dspi_cfg_speed(struct fsl_dspi_priv *priv, uint speed)
365 {
366 int ret;
367 uint bus_setup;
368 int best_i, best_j, bus_clk;
369
370 bus_clk = priv->bus_clk;
371
372 debug("DSPI set_speed: expected SCK speed %u, bus_clk %u.\n",
373 speed, bus_clk);
374
375 bus_setup = dspi_read32(priv->flags, &priv->regs->ctar[0]);
376 bus_setup &= ~(DSPI_CTAR_DBR | DSPI_CTAR_PBR(0x3) | DSPI_CTAR_BR(0xf));
377
378 ret = fsl_dspi_hz_to_spi_baud(&best_i, &best_j, speed, bus_clk);
379 if (ret) {
380 speed = priv->speed_hz;
381 debug("DSPI set_speed use default SCK rate %u.\n", speed);
382 fsl_dspi_hz_to_spi_baud(&best_i, &best_j, speed, bus_clk);
383 }
384
385 bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j));
386 dspi_write32(priv->flags, &priv->regs->ctar[0], bus_setup);
387
388 priv->speed_hz = speed;
389
390 return 0;
391 }
392 #ifndef CONFIG_DM_SPI
spi_init(void)393 void spi_init(void)
394 {
395 /* Nothing to do */
396 }
397
spi_cs_is_valid(unsigned int bus,unsigned int cs)398 int spi_cs_is_valid(unsigned int bus, unsigned int cs)
399 {
400 if (((cs >= 0) && (cs < 8)) && ((bus >= 0) && (bus < 8)))
401 return 1;
402 else
403 return 0;
404 }
405
spi_setup_slave(unsigned int bus,unsigned int cs,unsigned int max_hz,unsigned int mode)406 struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
407 unsigned int max_hz, unsigned int mode)
408 {
409 struct fsl_dspi *dspi;
410 uint mcr_cfg_val;
411
412 dspi = spi_alloc_slave(struct fsl_dspi, bus, cs);
413 if (!dspi)
414 return NULL;
415
416 cpu_dspi_port_conf();
417
418 #ifdef CONFIG_SYS_FSL_DSPI_BE
419 dspi->priv.flags |= DSPI_FLAG_REGMAP_ENDIAN_BIG;
420 #endif
421
422 dspi->priv.regs = (struct dspi *)MMAP_DSPI;
423
424 #ifdef CONFIG_M68K
425 dspi->priv.bus_clk = gd->bus_clk;
426 #else
427 dspi->priv.bus_clk = mxc_get_clock(MXC_DSPI_CLK);
428 #endif
429 dspi->priv.speed_hz = FSL_DSPI_DEFAULT_SCK_FREQ;
430
431 /* default: all CS signals inactive state is high */
432 mcr_cfg_val = DSPI_MCR_MSTR | DSPI_MCR_PCSIS_MASK |
433 DSPI_MCR_CRXF | DSPI_MCR_CTXF;
434 fsl_dspi_init_mcr(&dspi->priv, mcr_cfg_val);
435
436 for (i = 0; i < FSL_DSPI_MAX_CHIPSELECT; i++)
437 dspi->priv.ctar_val[i] = DSPI_CTAR_DEFAULT_VALUE;
438
439 #ifdef CONFIG_SYS_DSPI_CTAR0
440 if (FSL_DSPI_MAX_CHIPSELECT > 0)
441 dspi->priv.ctar_val[0] = CONFIG_SYS_DSPI_CTAR0;
442 #endif
443 #ifdef CONFIG_SYS_DSPI_CTAR1
444 if (FSL_DSPI_MAX_CHIPSELECT > 1)
445 dspi->priv.ctar_val[1] = CONFIG_SYS_DSPI_CTAR1;
446 #endif
447 #ifdef CONFIG_SYS_DSPI_CTAR2
448 if (FSL_DSPI_MAX_CHIPSELECT > 2)
449 dspi->priv.ctar_val[2] = CONFIG_SYS_DSPI_CTAR2;
450 #endif
451 #ifdef CONFIG_SYS_DSPI_CTAR3
452 if (FSL_DSPI_MAX_CHIPSELECT > 3)
453 dspi->priv.ctar_val[3] = CONFIG_SYS_DSPI_CTAR3;
454 #endif
455 #ifdef CONFIG_SYS_DSPI_CTAR4
456 if (FSL_DSPI_MAX_CHIPSELECT > 4)
457 dspi->priv.ctar_val[4] = CONFIG_SYS_DSPI_CTAR4;
458 #endif
459 #ifdef CONFIG_SYS_DSPI_CTAR5
460 if (FSL_DSPI_MAX_CHIPSELECT > 5)
461 dspi->priv.ctar_val[5] = CONFIG_SYS_DSPI_CTAR5;
462 #endif
463 #ifdef CONFIG_SYS_DSPI_CTAR6
464 if (FSL_DSPI_MAX_CHIPSELECT > 6)
465 dspi->priv.ctar_val[6] = CONFIG_SYS_DSPI_CTAR6;
466 #endif
467 #ifdef CONFIG_SYS_DSPI_CTAR7
468 if (FSL_DSPI_MAX_CHIPSELECT > 7)
469 dspi->priv.ctar_val[7] = CONFIG_SYS_DSPI_CTAR7;
470 #endif
471
472 fsl_dspi_cfg_speed(&dspi->priv, max_hz);
473
474 /* configure transfer mode */
475 fsl_dspi_cfg_ctar_mode(&dspi->priv, cs, mode);
476
477 /* configure active state of CSX */
478 fsl_dspi_cfg_cs_active_state(&dspi->priv, cs, mode);
479
480 return &dspi->slave;
481 }
482
spi_free_slave(struct spi_slave * slave)483 void spi_free_slave(struct spi_slave *slave)
484 {
485 free(slave);
486 }
487
spi_claim_bus(struct spi_slave * slave)488 int spi_claim_bus(struct spi_slave *slave)
489 {
490 uint sr_val;
491 struct fsl_dspi *dspi = (struct fsl_dspi *)slave;
492
493 cpu_dspi_claim_bus(slave->bus, slave->cs);
494
495 fsl_dspi_clr_fifo(&dspi->priv);
496
497 /* check module TX and RX status */
498 sr_val = dspi_read32(dspi->priv.flags, &dspi->priv.regs->sr);
499 if ((sr_val & DSPI_SR_TXRXS) != DSPI_SR_TXRXS) {
500 debug("DSPI RX/TX not ready!\n");
501 return -EIO;
502 }
503
504 return 0;
505 }
506
spi_release_bus(struct spi_slave * slave)507 void spi_release_bus(struct spi_slave *slave)
508 {
509 struct fsl_dspi *dspi = (struct fsl_dspi *)slave;
510
511 dspi_halt(&dspi->priv, 1);
512 cpu_dspi_release_bus(slave->bus.slave->cs);
513 }
514
spi_xfer(struct spi_slave * slave,unsigned int bitlen,const void * dout,void * din,unsigned long flags)515 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
516 void *din, unsigned long flags)
517 {
518 struct fsl_dspi *dspi = (struct fsl_dspi *)slave;
519 return dspi_xfer(&dspi->priv, slave->cs, bitlen, dout, din, flags);
520 }
521 #else
fsl_dspi_child_pre_probe(struct udevice * dev)522 static int fsl_dspi_child_pre_probe(struct udevice *dev)
523 {
524 struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
525 struct fsl_dspi_priv *priv = dev_get_priv(dev->parent);
526
527 if (slave_plat->cs >= priv->num_chipselect) {
528 debug("DSPI invalid chipselect number %d(max %d)!\n",
529 slave_plat->cs, priv->num_chipselect - 1);
530 return -EINVAL;
531 }
532
533 priv->ctar_val[slave_plat->cs] = DSPI_CTAR_DEFAULT_VALUE;
534
535 debug("DSPI pre_probe slave device on CS %u, max_hz %u, mode 0x%x.\n",
536 slave_plat->cs, slave_plat->max_hz, slave_plat->mode);
537
538 return 0;
539 }
540
fsl_dspi_probe(struct udevice * bus)541 static int fsl_dspi_probe(struct udevice *bus)
542 {
543 struct fsl_dspi_platdata *plat = dev_get_platdata(bus);
544 struct fsl_dspi_priv *priv = dev_get_priv(bus);
545 struct dm_spi_bus *dm_spi_bus;
546 uint mcr_cfg_val;
547
548 dm_spi_bus = bus->uclass_priv;
549
550 /* cpu speical pin muxing configure */
551 cpu_dspi_port_conf();
552
553 /* get input clk frequency */
554 priv->regs = (struct dspi *)plat->regs_addr;
555 priv->flags = plat->flags;
556 #ifdef CONFIG_M68K
557 priv->bus_clk = gd->bus_clk;
558 #else
559 priv->bus_clk = mxc_get_clock(MXC_DSPI_CLK);
560 #endif
561 priv->num_chipselect = plat->num_chipselect;
562 priv->speed_hz = plat->speed_hz;
563 /* frame data length in bits, default 8bits */
564 priv->charbit = 8;
565
566 dm_spi_bus->max_hz = plat->speed_hz;
567
568 /* default: all CS signals inactive state is high */
569 mcr_cfg_val = DSPI_MCR_MSTR | DSPI_MCR_PCSIS_MASK |
570 DSPI_MCR_CRXF | DSPI_MCR_CTXF;
571 fsl_dspi_init_mcr(priv, mcr_cfg_val);
572
573 debug("%s probe done, bus-num %d.\n", bus->name, bus->seq);
574
575 return 0;
576 }
577
fsl_dspi_claim_bus(struct udevice * dev)578 static int fsl_dspi_claim_bus(struct udevice *dev)
579 {
580 uint sr_val;
581 struct fsl_dspi_priv *priv;
582 struct udevice *bus = dev->parent;
583 struct dm_spi_slave_platdata *slave_plat =
584 dev_get_parent_platdata(dev);
585
586 priv = dev_get_priv(bus);
587
588 /* processor special preparation work */
589 cpu_dspi_claim_bus(bus->seq, slave_plat->cs);
590
591 /* configure transfer mode */
592 fsl_dspi_cfg_ctar_mode(priv, slave_plat->cs, priv->mode);
593
594 /* configure active state of CSX */
595 fsl_dspi_cfg_cs_active_state(priv, slave_plat->cs,
596 priv->mode);
597
598 fsl_dspi_clr_fifo(priv);
599
600 /* check module TX and RX status */
601 sr_val = dspi_read32(priv->flags, &priv->regs->sr);
602 if ((sr_val & DSPI_SR_TXRXS) != DSPI_SR_TXRXS) {
603 debug("DSPI RX/TX not ready!\n");
604 return -EIO;
605 }
606
607 return 0;
608 }
609
fsl_dspi_release_bus(struct udevice * dev)610 static int fsl_dspi_release_bus(struct udevice *dev)
611 {
612 struct udevice *bus = dev->parent;
613 struct fsl_dspi_priv *priv = dev_get_priv(bus);
614 struct dm_spi_slave_platdata *slave_plat =
615 dev_get_parent_platdata(dev);
616
617 /* halt module */
618 dspi_halt(priv, 1);
619
620 /* processor special release work */
621 cpu_dspi_release_bus(bus->seq, slave_plat->cs);
622
623 return 0;
624 }
625
626 /**
627 * This function doesn't do anything except help with debugging
628 */
fsl_dspi_bind(struct udevice * bus)629 static int fsl_dspi_bind(struct udevice *bus)
630 {
631 debug("%s assigned req_seq %d.\n", bus->name, bus->req_seq);
632 return 0;
633 }
634
fsl_dspi_ofdata_to_platdata(struct udevice * bus)635 static int fsl_dspi_ofdata_to_platdata(struct udevice *bus)
636 {
637 fdt_addr_t addr;
638 struct fsl_dspi_platdata *plat = bus->platdata;
639 const void *blob = gd->fdt_blob;
640 int node = dev_of_offset(bus);
641
642 if (fdtdec_get_bool(blob, node, "big-endian"))
643 plat->flags |= DSPI_FLAG_REGMAP_ENDIAN_BIG;
644
645 plat->num_chipselect =
646 fdtdec_get_int(blob, node, "num-cs", FSL_DSPI_MAX_CHIPSELECT);
647
648 addr = devfdt_get_addr(bus);
649 if (addr == FDT_ADDR_T_NONE) {
650 debug("DSPI: Can't get base address or size\n");
651 return -ENOMEM;
652 }
653 plat->regs_addr = addr;
654
655 plat->speed_hz = fdtdec_get_int(blob,
656 node, "spi-max-frequency", FSL_DSPI_DEFAULT_SCK_FREQ);
657
658 debug("DSPI: regs=%pa, max-frequency=%d, endianess=%s, num-cs=%d\n",
659 &plat->regs_addr, plat->speed_hz,
660 plat->flags & DSPI_FLAG_REGMAP_ENDIAN_BIG ? "be" : "le",
661 plat->num_chipselect);
662
663 return 0;
664 }
665
fsl_dspi_xfer(struct udevice * dev,unsigned int bitlen,const void * dout,void * din,unsigned long flags)666 static int fsl_dspi_xfer(struct udevice *dev, unsigned int bitlen,
667 const void *dout, void *din, unsigned long flags)
668 {
669 struct fsl_dspi_priv *priv;
670 struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
671 struct udevice *bus;
672
673 bus = dev->parent;
674 priv = dev_get_priv(bus);
675
676 return dspi_xfer(priv, slave_plat->cs, bitlen, dout, din, flags);
677 }
678
fsl_dspi_set_speed(struct udevice * bus,uint speed)679 static int fsl_dspi_set_speed(struct udevice *bus, uint speed)
680 {
681 struct fsl_dspi_priv *priv = dev_get_priv(bus);
682
683 return fsl_dspi_cfg_speed(priv, speed);
684 }
685
fsl_dspi_set_mode(struct udevice * bus,uint mode)686 static int fsl_dspi_set_mode(struct udevice *bus, uint mode)
687 {
688 struct fsl_dspi_priv *priv = dev_get_priv(bus);
689
690 debug("DSPI set_mode: mode 0x%x.\n", mode);
691
692 /*
693 * We store some chipselect special configure value in priv->ctar_val,
694 * and we can't get the correct chipselect number here,
695 * so just store mode value.
696 * Do really configuration when claim_bus.
697 */
698 priv->mode = mode;
699
700 return 0;
701 }
702
703 static const struct dm_spi_ops fsl_dspi_ops = {
704 .claim_bus = fsl_dspi_claim_bus,
705 .release_bus = fsl_dspi_release_bus,
706 .xfer = fsl_dspi_xfer,
707 .set_speed = fsl_dspi_set_speed,
708 .set_mode = fsl_dspi_set_mode,
709 };
710
711 static const struct udevice_id fsl_dspi_ids[] = {
712 { .compatible = "fsl,vf610-dspi" },
713 { }
714 };
715
716 U_BOOT_DRIVER(fsl_dspi) = {
717 .name = "fsl_dspi",
718 .id = UCLASS_SPI,
719 .of_match = fsl_dspi_ids,
720 .ops = &fsl_dspi_ops,
721 .ofdata_to_platdata = fsl_dspi_ofdata_to_platdata,
722 .platdata_auto_alloc_size = sizeof(struct fsl_dspi_platdata),
723 .priv_auto_alloc_size = sizeof(struct fsl_dspi_priv),
724 .probe = fsl_dspi_probe,
725 .child_pre_probe = fsl_dspi_child_pre_probe,
726 .bind = fsl_dspi_bind,
727 };
728 #endif
729