• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0+
2 
3 /*
4  * sun9i specific clock code
5  *
6  * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
7  *
8  * (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
9  *                    Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
10  */
11 
12 #include <common.h>
13 #include <asm/io.h>
14 #include <asm/arch/clock.h>
15 #include <asm/arch/prcm.h>
16 #include <asm/arch/sys_proto.h>
17 
18 
19 #ifdef CONFIG_SPL_BUILD
20 
clock_init_safe(void)21 void clock_init_safe(void)
22 {
23 	struct sunxi_ccm_reg * const ccm =
24 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
25 
26 	/* Set up PLL12 (peripheral 1) */
27 	clock_set_pll12(1200000000);
28 
29 	/* Set up PLL1 (cluster 0) and PLL2 (cluster 1) */
30 	clock_set_pll1(408000000);
31 	clock_set_pll2(408000000);
32 
33 	/* Set up PLL4 (peripheral 0) */
34 	clock_set_pll4(960000000);
35 
36 	/* Set up dividers for AXI0 and APB0 on cluster 0: PLL1 / 2 = 204MHz */
37 	writel(C0_CFG_AXI0_CLK_DIV_RATIO(2) |
38 	       C0_CFG_APB0_CLK_DIV_RATIO(2), &ccm->c0_cfg);
39 
40 	/* AHB0: 120 MHz (PLL_PERIPH0 / 8) */
41 	writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
42 	       &ccm->ahb0_cfg);
43 	/* AHB1: 240 MHz (PLL_PERIPH0 / 4) */
44 	writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(4),
45 	       &ccm->ahb1_cfg);
46 	/* AHB2: 120 MHz (PLL_PERIPH0 / 8) */
47 	writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
48 	       &ccm->ahb2_cfg);
49 	/* APB0: 120 MHz (PLL_PERIPH0 / 8) */
50 	writel(APB0_SRC_PLL_PERIPH0 | APB0_CLK_DIV_RATIO(8),
51 	       &ccm->apb0_cfg);
52 
53 	/* GTBUS: 400MHz (PERIPH0 div 3) */
54 	writel(GTBUS_SRC_PLL_PERIPH1 | GTBUS_CLK_DIV_RATIO(3),
55 	       &ccm->gtbus_cfg);
56 	/* CCI400: 480MHz (PERIPH1 div 2) */
57 	writel(CCI400_SRC_PLL_PERIPH0 | CCI400_CLK_DIV_RATIO(2),
58 	       &ccm->cci400_cfg);
59 
60 	/* Deassert DMA reset and open clock gating for DMA */
61 	setbits_le32(&ccm->ahb_reset1_cfg, (1 << 24));
62 	setbits_le32(&ccm->apb1_gate, (1 << 24));
63 
64 	/* set enable-bit in TSTAMP_CTRL_REG */
65 	writel(1, 0x01720000);
66 }
67 #endif
68 
clock_init_uart(void)69 void clock_init_uart(void)
70 {
71 	struct sunxi_ccm_reg *const ccm =
72 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
73 
74 	/* open the clock for uart */
75 	setbits_le32(&ccm->apb1_gate,
76 		     CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT +
77 				       CONFIG_CONS_INDEX - 1));
78 	/* deassert uart reset */
79 	setbits_le32(&ccm->apb1_reset_cfg,
80 		     1 << (APB1_RESET_UART_SHIFT +
81 			   CONFIG_CONS_INDEX - 1));
82 }
83 
84 #ifdef CONFIG_SPL_BUILD
clock_set_pll1(unsigned int clk)85 void clock_set_pll1(unsigned int clk)
86 {
87 	struct sunxi_ccm_reg * const ccm =
88 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
89 	const int p = 0;
90 
91 	/* Switch cluster 0 to 24MHz clock while changing PLL1 */
92 	clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
93 			C0_CPUX_CLK_SRC_OSC24M);
94 
95 	writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) |
96 	       CCM_PLL1_CLOCK_TIME_2 |
97 	       CCM_PLL1_CTRL_N(clk / 24000000),
98 	       &ccm->pll1_c0_cfg);
99 	/*
100 	 * Don't bother with the stable-time registers, as it doesn't
101 	 * wait until the PLL is stable.  Note, that even Allwinner
102 	 * just uses a delay loop (or rather the AVS timer) for this
103 	 * instead of the PLL_STABLE_STATUS register.
104 	 */
105 	sdelay(2000);
106 
107 	/* Switch cluster 0 back to PLL1 */
108 	clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
109 			C0_CPUX_CLK_SRC_PLL1);
110 }
111 
clock_set_pll2(unsigned int clk)112 void clock_set_pll2(unsigned int clk)
113 {
114 	struct sunxi_ccm_reg * const ccm =
115 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
116 	const int p = 0;
117 
118 	/* Switch cluster 1 to 24MHz clock while changing PLL2 */
119 	clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
120 			C1_CPUX_CLK_SRC_OSC24M);
121 
122 	writel(CCM_PLL2_CTRL_EN | CCM_PLL2_CTRL_P(p) |
123 	       CCM_PLL2_CLOCK_TIME_2 | CCM_PLL2_CTRL_N(clk / 24000000),
124 	       &ccm->pll2_c1_cfg);
125 
126 	sdelay(2000);
127 
128 	/* Switch cluster 1 back to PLL2 */
129 	clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
130 			C1_CPUX_CLK_SRC_PLL2);
131 }
132 
clock_set_pll6(unsigned int clk)133 void clock_set_pll6(unsigned int clk)
134 {
135 	struct sunxi_ccm_reg * const ccm =
136 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
137 	const int p = 0;
138 
139 	writel(CCM_PLL6_CTRL_EN | CCM_PLL6_CFG_UPDATE | CCM_PLL6_CTRL_P(p)
140 	       | CCM_PLL6_CTRL_N(clk / 24000000),
141 	       &ccm->pll6_ddr_cfg);
142 	do { } while (!(readl(&ccm->pll_stable_status) & PLL_DDR_STATUS));
143 
144 	sdelay(2000);
145 }
146 
clock_set_pll12(unsigned int clk)147 void clock_set_pll12(unsigned int clk)
148 {
149 	struct sunxi_ccm_reg * const ccm =
150 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
151 
152 	if (readl(&ccm->pll12_periph1_cfg) & CCM_PLL12_CTRL_EN)
153 		return;
154 
155 	writel(CCM_PLL12_CTRL_EN | CCM_PLL12_CTRL_N(clk / 24000000),
156 	       &ccm->pll12_periph1_cfg);
157 
158 	sdelay(2000);
159 }
160 
161 
clock_set_pll4(unsigned int clk)162 void clock_set_pll4(unsigned int clk)
163 {
164 	struct sunxi_ccm_reg * const ccm =
165 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
166 
167 	writel(CCM_PLL4_CTRL_EN | CCM_PLL4_CTRL_N(clk / 24000000),
168 	       &ccm->pll4_periph0_cfg);
169 
170 	sdelay(2000);
171 }
172 #endif
173 
clock_twi_onoff(int port,int state)174 int clock_twi_onoff(int port, int state)
175 {
176 	struct sunxi_ccm_reg *const ccm =
177 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
178 
179 	if (port > 4)
180 		return -1;
181 
182 	/* set the apb reset and clock gate for twi */
183 	if (state) {
184 		setbits_le32(&ccm->apb1_gate,
185 			     CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
186 		setbits_le32(&ccm->apb1_reset_cfg,
187 			     1 << (APB1_RESET_TWI_SHIFT + port));
188 	} else {
189 		clrbits_le32(&ccm->apb1_reset_cfg,
190 			     1 << (APB1_RESET_TWI_SHIFT + port));
191 		clrbits_le32(&ccm->apb1_gate,
192 			     CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
193 	}
194 
195 	return 0;
196 }
197 
clock_get_pll4_periph0(void)198 unsigned int clock_get_pll4_periph0(void)
199 {
200 	struct sunxi_ccm_reg *const ccm =
201 		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
202 	uint32_t rval = readl(&ccm->pll4_periph0_cfg);
203 	int n = ((rval & CCM_PLL4_CTRL_N_MASK) >> CCM_PLL4_CTRL_N_SHIFT);
204 	int p = ((rval & CCM_PLL4_CTRL_P_MASK) >> CCM_PLL4_CTRL_P_SHIFT);
205 	int m = ((rval & CCM_PLL4_CTRL_M_MASK) >> CCM_PLL4_CTRL_M_SHIFT) + 1;
206 	const int k = 1;
207 
208 	return ((24000000 * n * k) >> p) / m;
209 }
210