• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * (C) Copyright 2000-2004
4  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5  *
6  * (C) Copyright 2007 Freescale Semiconductor, Inc.
7  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
8  */
9 
10 #include <common.h>
11 #include <environment.h>
12 #include <malloc.h>
13 
14 #include <command.h>
15 #include <net.h>
16 #include <netdev.h>
17 #include <miiphy.h>
18 
19 #include <asm/fec.h>
20 #include <asm/immap.h>
21 
22 #undef	ET_DEBUG
23 #undef	MII_DEBUG
24 
25 /* Ethernet Transmit and Receive Buffers */
26 #define DBUF_LENGTH		1520
27 #define TX_BUF_CNT		2
28 #define PKT_MAXBUF_SIZE		1518
29 #define PKT_MINBUF_SIZE		64
30 #define PKT_MAXBLR_SIZE		1520
31 #define LAST_PKTBUFSRX		PKTBUFSRX - 1
32 #define BD_ENET_RX_W_E		(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY)
33 #define BD_ENET_TX_RDY_LST	(BD_ENET_TX_READY | BD_ENET_TX_LAST)
34 
35 struct fec_info_s fec_info[] = {
36 #ifdef CONFIG_SYS_FEC0_IOBASE
37 	{
38 	 0,			/* index */
39 	 CONFIG_SYS_FEC0_IOBASE,	/* io base */
40 	 CONFIG_SYS_FEC0_PINMUX,	/* gpio pin muxing */
41 	 CONFIG_SYS_FEC0_MIIBASE,	/* mii base */
42 	 -1,			/* phy_addr */
43 	 0,			/* duplex and speed */
44 	 0,			/* phy name */
45 	 0,			/* phyname init */
46 	 0,			/* RX BD */
47 	 0,			/* TX BD */
48 	 0,			/* rx Index */
49 	 0,			/* tx Index */
50 	 0,			/* tx buffer */
51 	 0,			/* initialized flag */
52 	 (struct fec_info_s *)-1,
53 	 },
54 #endif
55 #ifdef CONFIG_SYS_FEC1_IOBASE
56 	{
57 	 1,			/* index */
58 	 CONFIG_SYS_FEC1_IOBASE,	/* io base */
59 	 CONFIG_SYS_FEC1_PINMUX,	/* gpio pin muxing */
60 	 CONFIG_SYS_FEC1_MIIBASE,	/* mii base */
61 	 -1,			/* phy_addr */
62 	 0,			/* duplex and speed */
63 	 0,			/* phy name */
64 	 0,			/* phy name init */
65 #ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
66 	 (cbd_t *)DBUF_LENGTH,	/* RX BD */
67 #else
68 	 0,			/* RX BD */
69 #endif
70 	 0,			/* TX BD */
71 	 0,			/* rx Index */
72 	 0,			/* tx Index */
73 	 0,			/* tx buffer */
74 	 0,			/* initialized flag */
75 	 (struct fec_info_s *)-1,
76 	 }
77 #endif
78 };
79 
80 int fec_recv(struct eth_device *dev);
81 int fec_init(struct eth_device *dev, bd_t * bd);
82 void fec_halt(struct eth_device *dev);
83 void fec_reset(struct eth_device *dev);
84 
setFecDuplexSpeed(volatile fec_t * fecp,bd_t * bd,int dup_spd)85 void setFecDuplexSpeed(volatile fec_t * fecp, bd_t * bd, int dup_spd)
86 {
87 	if ((dup_spd >> 16) == FULL) {
88 		/* Set maximum frame length */
89 		fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
90 		    FEC_RCR_PROM | 0x100;
91 		fecp->tcr = FEC_TCR_FDEN;
92 	} else {
93 		/* Half duplex mode */
94 		fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) |
95 		    FEC_RCR_MII_MODE | FEC_RCR_DRT;
96 		fecp->tcr &= ~FEC_TCR_FDEN;
97 	}
98 
99 	if ((dup_spd & 0xFFFF) == _100BASET) {
100 #ifdef CONFIG_MCF5445x
101 		fecp->rcr &= ~0x200;	/* disabled 10T base */
102 #endif
103 #ifdef MII_DEBUG
104 		printf("100Mbps\n");
105 #endif
106 		bd->bi_ethspeed = 100;
107 	} else {
108 #ifdef CONFIG_MCF5445x
109 		fecp->rcr |= 0x200;	/* enabled 10T base */
110 #endif
111 #ifdef MII_DEBUG
112 		printf("10Mbps\n");
113 #endif
114 		bd->bi_ethspeed = 10;
115 	}
116 }
117 
fec_send(struct eth_device * dev,void * packet,int length)118 static int fec_send(struct eth_device *dev, void *packet, int length)
119 {
120 	struct fec_info_s *info = dev->priv;
121 	volatile fec_t *fecp = (fec_t *) (info->iobase);
122 	int j, rc;
123 	u16 phyStatus;
124 
125 	miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
126 
127 	/* section 16.9.23.3
128 	 * Wait for ready
129 	 */
130 	j = 0;
131 	while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) &&
132 	       (j < MCFFEC_TOUT_LOOP)) {
133 		udelay(1);
134 		j++;
135 	}
136 	if (j >= MCFFEC_TOUT_LOOP) {
137 		printf("TX not ready\n");
138 	}
139 
140 	info->txbd[info->txIdx].cbd_bufaddr = (uint) packet;
141 	info->txbd[info->txIdx].cbd_datlen = length;
142 	info->txbd[info->txIdx].cbd_sc |= BD_ENET_TX_RDY_LST;
143 
144 	/* Activate transmit Buffer Descriptor polling */
145 	fecp->tdar = 0x01000000;	/* Descriptor polling active    */
146 
147 #ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
148 	/*
149 	 * FEC unable to initial transmit data packet.
150 	 * A nop will ensure the descriptor polling active completed.
151 	 * CF Internal RAM has shorter cycle access than DRAM. If use
152 	 * DRAM as Buffer descriptor and data, a nop is a must.
153 	 * Affect only V2 and V3.
154 	 */
155 	__asm__ ("nop");
156 
157 #endif
158 
159 #ifdef CONFIG_SYS_UNIFY_CACHE
160 	icache_invalid();
161 #endif
162 
163 	j = 0;
164 	while ((info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_READY) &&
165 	       (j < MCFFEC_TOUT_LOOP)) {
166 		udelay(1);
167 		j++;
168 	}
169 	if (j >= MCFFEC_TOUT_LOOP) {
170 		printf("TX timeout\n");
171 	}
172 
173 #ifdef ET_DEBUG
174 	printf("%s[%d] %s: cycles: %d    status: %x  retry cnt: %d\n",
175 	       __FILE__, __LINE__, __FUNCTION__, j,
176 	       info->txbd[info->txIdx].cbd_sc,
177 	       (info->txbd[info->txIdx].cbd_sc & 0x003C) >> 2);
178 #endif
179 
180 	/* return only status bits */
181 	rc = (info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS);
182 	info->txIdx = (info->txIdx + 1) % TX_BUF_CNT;
183 
184 	return rc;
185 }
186 
fec_recv(struct eth_device * dev)187 int fec_recv(struct eth_device *dev)
188 {
189 	struct fec_info_s *info = dev->priv;
190 	volatile fec_t *fecp = (fec_t *) (info->iobase);
191 	int length;
192 
193 	for (;;) {
194 #ifndef CONFIG_SYS_FEC_BUF_USE_SRAM
195 #endif
196 #ifdef CONFIG_SYS_UNIFY_CACHE
197 		icache_invalid();
198 #endif
199 		/* section 16.9.23.2 */
200 		if (info->rxbd[info->rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
201 			length = -1;
202 			break;	/* nothing received - leave for() loop */
203 		}
204 
205 		length = info->rxbd[info->rxIdx].cbd_datlen;
206 
207 		if (info->rxbd[info->rxIdx].cbd_sc & 0x003f) {
208 			printf("%s[%d] err: %x\n",
209 			       __FUNCTION__, __LINE__,
210 			       info->rxbd[info->rxIdx].cbd_sc);
211 #ifdef ET_DEBUG
212 			printf("%s[%d] err: %x\n",
213 			       __FUNCTION__, __LINE__,
214 			       info->rxbd[info->rxIdx].cbd_sc);
215 #endif
216 		} else {
217 
218 			length -= 4;
219 			/* Pass the packet up to the protocol layers. */
220 			net_process_received_packet(net_rx_packets[info->rxIdx],
221 						    length);
222 
223 			fecp->eir |= FEC_EIR_RXF;
224 		}
225 
226 		/* Give the buffer back to the FEC. */
227 		info->rxbd[info->rxIdx].cbd_datlen = 0;
228 
229 		/* wrap around buffer index when necessary */
230 		if (info->rxIdx == LAST_PKTBUFSRX) {
231 			info->rxbd[PKTBUFSRX - 1].cbd_sc = BD_ENET_RX_W_E;
232 			info->rxIdx = 0;
233 		} else {
234 			info->rxbd[info->rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
235 			info->rxIdx++;
236 		}
237 
238 		/* Try to fill Buffer Descriptors */
239 		fecp->rdar = 0x01000000;	/* Descriptor polling active    */
240 	}
241 
242 	return length;
243 }
244 
245 #ifdef ET_DEBUG
dbgFecRegs(struct eth_device * dev)246 void dbgFecRegs(struct eth_device *dev)
247 {
248 	struct fec_info_s *info = dev->priv;
249 	volatile fec_t *fecp = (fec_t *) (info->iobase);
250 
251 	printf("=====\n");
252 	printf("ievent       %x - %x\n", (int)&fecp->eir, fecp->eir);
253 	printf("imask        %x - %x\n", (int)&fecp->eimr, fecp->eimr);
254 	printf("r_des_active %x - %x\n", (int)&fecp->rdar, fecp->rdar);
255 	printf("x_des_active %x - %x\n", (int)&fecp->tdar, fecp->tdar);
256 	printf("ecntrl       %x - %x\n", (int)&fecp->ecr, fecp->ecr);
257 	printf("mii_mframe   %x - %x\n", (int)&fecp->mmfr, fecp->mmfr);
258 	printf("mii_speed    %x - %x\n", (int)&fecp->mscr, fecp->mscr);
259 	printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc);
260 	printf("r_cntrl      %x - %x\n", (int)&fecp->rcr, fecp->rcr);
261 	printf("x_cntrl      %x - %x\n", (int)&fecp->tcr, fecp->tcr);
262 	printf("padr_l       %x - %x\n", (int)&fecp->palr, fecp->palr);
263 	printf("padr_u       %x - %x\n", (int)&fecp->paur, fecp->paur);
264 	printf("op_pause     %x - %x\n", (int)&fecp->opd, fecp->opd);
265 	printf("iadr_u       %x - %x\n", (int)&fecp->iaur, fecp->iaur);
266 	printf("iadr_l       %x - %x\n", (int)&fecp->ialr, fecp->ialr);
267 	printf("gadr_u       %x - %x\n", (int)&fecp->gaur, fecp->gaur);
268 	printf("gadr_l       %x - %x\n", (int)&fecp->galr, fecp->galr);
269 	printf("x_wmrk       %x - %x\n", (int)&fecp->tfwr, fecp->tfwr);
270 	printf("r_bound      %x - %x\n", (int)&fecp->frbr, fecp->frbr);
271 	printf("r_fstart     %x - %x\n", (int)&fecp->frsr, fecp->frsr);
272 	printf("r_drng       %x - %x\n", (int)&fecp->erdsr, fecp->erdsr);
273 	printf("x_drng       %x - %x\n", (int)&fecp->etdsr, fecp->etdsr);
274 	printf("r_bufsz      %x - %x\n", (int)&fecp->emrbr, fecp->emrbr);
275 
276 	printf("\n");
277 	printf("rmon_t_drop        %x - %x\n", (int)&fecp->rmon_t_drop,
278 	       fecp->rmon_t_drop);
279 	printf("rmon_t_packets     %x - %x\n", (int)&fecp->rmon_t_packets,
280 	       fecp->rmon_t_packets);
281 	printf("rmon_t_bc_pkt      %x - %x\n", (int)&fecp->rmon_t_bc_pkt,
282 	       fecp->rmon_t_bc_pkt);
283 	printf("rmon_t_mc_pkt      %x - %x\n", (int)&fecp->rmon_t_mc_pkt,
284 	       fecp->rmon_t_mc_pkt);
285 	printf("rmon_t_crc_align   %x - %x\n", (int)&fecp->rmon_t_crc_align,
286 	       fecp->rmon_t_crc_align);
287 	printf("rmon_t_undersize   %x - %x\n", (int)&fecp->rmon_t_undersize,
288 	       fecp->rmon_t_undersize);
289 	printf("rmon_t_oversize    %x - %x\n", (int)&fecp->rmon_t_oversize,
290 	       fecp->rmon_t_oversize);
291 	printf("rmon_t_frag        %x - %x\n", (int)&fecp->rmon_t_frag,
292 	       fecp->rmon_t_frag);
293 	printf("rmon_t_jab         %x - %x\n", (int)&fecp->rmon_t_jab,
294 	       fecp->rmon_t_jab);
295 	printf("rmon_t_col         %x - %x\n", (int)&fecp->rmon_t_col,
296 	       fecp->rmon_t_col);
297 	printf("rmon_t_p64         %x - %x\n", (int)&fecp->rmon_t_p64,
298 	       fecp->rmon_t_p64);
299 	printf("rmon_t_p65to127    %x - %x\n", (int)&fecp->rmon_t_p65to127,
300 	       fecp->rmon_t_p65to127);
301 	printf("rmon_t_p128to255   %x - %x\n", (int)&fecp->rmon_t_p128to255,
302 	       fecp->rmon_t_p128to255);
303 	printf("rmon_t_p256to511   %x - %x\n", (int)&fecp->rmon_t_p256to511,
304 	       fecp->rmon_t_p256to511);
305 	printf("rmon_t_p512to1023  %x - %x\n", (int)&fecp->rmon_t_p512to1023,
306 	       fecp->rmon_t_p512to1023);
307 	printf("rmon_t_p1024to2047 %x - %x\n", (int)&fecp->rmon_t_p1024to2047,
308 	       fecp->rmon_t_p1024to2047);
309 	printf("rmon_t_p_gte2048   %x - %x\n", (int)&fecp->rmon_t_p_gte2048,
310 	       fecp->rmon_t_p_gte2048);
311 	printf("rmon_t_octets      %x - %x\n", (int)&fecp->rmon_t_octets,
312 	       fecp->rmon_t_octets);
313 
314 	printf("\n");
315 	printf("ieee_t_drop      %x - %x\n", (int)&fecp->ieee_t_drop,
316 	       fecp->ieee_t_drop);
317 	printf("ieee_t_frame_ok  %x - %x\n", (int)&fecp->ieee_t_frame_ok,
318 	       fecp->ieee_t_frame_ok);
319 	printf("ieee_t_1col      %x - %x\n", (int)&fecp->ieee_t_1col,
320 	       fecp->ieee_t_1col);
321 	printf("ieee_t_mcol      %x - %x\n", (int)&fecp->ieee_t_mcol,
322 	       fecp->ieee_t_mcol);
323 	printf("ieee_t_def       %x - %x\n", (int)&fecp->ieee_t_def,
324 	       fecp->ieee_t_def);
325 	printf("ieee_t_lcol      %x - %x\n", (int)&fecp->ieee_t_lcol,
326 	       fecp->ieee_t_lcol);
327 	printf("ieee_t_excol     %x - %x\n", (int)&fecp->ieee_t_excol,
328 	       fecp->ieee_t_excol);
329 	printf("ieee_t_macerr    %x - %x\n", (int)&fecp->ieee_t_macerr,
330 	       fecp->ieee_t_macerr);
331 	printf("ieee_t_cserr     %x - %x\n", (int)&fecp->ieee_t_cserr,
332 	       fecp->ieee_t_cserr);
333 	printf("ieee_t_sqe       %x - %x\n", (int)&fecp->ieee_t_sqe,
334 	       fecp->ieee_t_sqe);
335 	printf("ieee_t_fdxfc     %x - %x\n", (int)&fecp->ieee_t_fdxfc,
336 	       fecp->ieee_t_fdxfc);
337 	printf("ieee_t_octets_ok %x - %x\n", (int)&fecp->ieee_t_octets_ok,
338 	       fecp->ieee_t_octets_ok);
339 
340 	printf("\n");
341 	printf("rmon_r_drop        %x - %x\n", (int)&fecp->rmon_r_drop,
342 	       fecp->rmon_r_drop);
343 	printf("rmon_r_packets     %x - %x\n", (int)&fecp->rmon_r_packets,
344 	       fecp->rmon_r_packets);
345 	printf("rmon_r_bc_pkt      %x - %x\n", (int)&fecp->rmon_r_bc_pkt,
346 	       fecp->rmon_r_bc_pkt);
347 	printf("rmon_r_mc_pkt      %x - %x\n", (int)&fecp->rmon_r_mc_pkt,
348 	       fecp->rmon_r_mc_pkt);
349 	printf("rmon_r_crc_align   %x - %x\n", (int)&fecp->rmon_r_crc_align,
350 	       fecp->rmon_r_crc_align);
351 	printf("rmon_r_undersize   %x - %x\n", (int)&fecp->rmon_r_undersize,
352 	       fecp->rmon_r_undersize);
353 	printf("rmon_r_oversize    %x - %x\n", (int)&fecp->rmon_r_oversize,
354 	       fecp->rmon_r_oversize);
355 	printf("rmon_r_frag        %x - %x\n", (int)&fecp->rmon_r_frag,
356 	       fecp->rmon_r_frag);
357 	printf("rmon_r_jab         %x - %x\n", (int)&fecp->rmon_r_jab,
358 	       fecp->rmon_r_jab);
359 	printf("rmon_r_p64         %x - %x\n", (int)&fecp->rmon_r_p64,
360 	       fecp->rmon_r_p64);
361 	printf("rmon_r_p65to127    %x - %x\n", (int)&fecp->rmon_r_p65to127,
362 	       fecp->rmon_r_p65to127);
363 	printf("rmon_r_p128to255   %x - %x\n", (int)&fecp->rmon_r_p128to255,
364 	       fecp->rmon_r_p128to255);
365 	printf("rmon_r_p256to511   %x - %x\n", (int)&fecp->rmon_r_p256to511,
366 	       fecp->rmon_r_p256to511);
367 	printf("rmon_r_p512to1023  %x - %x\n", (int)&fecp->rmon_r_p512to1023,
368 	       fecp->rmon_r_p512to1023);
369 	printf("rmon_r_p1024to2047 %x - %x\n", (int)&fecp->rmon_r_p1024to2047,
370 	       fecp->rmon_r_p1024to2047);
371 	printf("rmon_r_p_gte2048   %x - %x\n", (int)&fecp->rmon_r_p_gte2048,
372 	       fecp->rmon_r_p_gte2048);
373 	printf("rmon_r_octets      %x - %x\n", (int)&fecp->rmon_r_octets,
374 	       fecp->rmon_r_octets);
375 
376 	printf("\n");
377 	printf("ieee_r_drop      %x - %x\n", (int)&fecp->ieee_r_drop,
378 	       fecp->ieee_r_drop);
379 	printf("ieee_r_frame_ok  %x - %x\n", (int)&fecp->ieee_r_frame_ok,
380 	       fecp->ieee_r_frame_ok);
381 	printf("ieee_r_crc       %x - %x\n", (int)&fecp->ieee_r_crc,
382 	       fecp->ieee_r_crc);
383 	printf("ieee_r_align     %x - %x\n", (int)&fecp->ieee_r_align,
384 	       fecp->ieee_r_align);
385 	printf("ieee_r_macerr    %x - %x\n", (int)&fecp->ieee_r_macerr,
386 	       fecp->ieee_r_macerr);
387 	printf("ieee_r_fdxfc     %x - %x\n", (int)&fecp->ieee_r_fdxfc,
388 	       fecp->ieee_r_fdxfc);
389 	printf("ieee_r_octets_ok %x - %x\n", (int)&fecp->ieee_r_octets_ok,
390 	       fecp->ieee_r_octets_ok);
391 
392 	printf("\n\n\n");
393 }
394 #endif
395 
fec_init(struct eth_device * dev,bd_t * bd)396 int fec_init(struct eth_device *dev, bd_t * bd)
397 {
398 	struct fec_info_s *info = dev->priv;
399 	volatile fec_t *fecp = (fec_t *) (info->iobase);
400 	int i;
401 	uchar ea[6];
402 
403 	fecpin_setclear(dev, 1);
404 
405 	fec_reset(dev);
406 
407 #if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
408 	defined (CONFIG_SYS_DISCOVER_PHY)
409 
410 	mii_init();
411 
412 	setFecDuplexSpeed(fecp, bd, info->dup_spd);
413 #else
414 #ifndef CONFIG_SYS_DISCOVER_PHY
415 	setFecDuplexSpeed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
416 #endif				/* ifndef CONFIG_SYS_DISCOVER_PHY */
417 #endif				/* CONFIG_CMD_MII || CONFIG_MII */
418 
419 	/* We use strictly polling mode only */
420 	fecp->eimr = 0;
421 
422 	/* Clear any pending interrupt */
423 	fecp->eir = 0xffffffff;
424 
425 	/* Set station address   */
426 	if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE) {
427 #ifdef CONFIG_SYS_FEC1_IOBASE
428 		volatile fec_t *fecp1 = (fec_t *) (CONFIG_SYS_FEC1_IOBASE);
429 		eth_env_get_enetaddr("eth1addr", ea);
430 		fecp1->palr =
431 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
432 		fecp1->paur = (ea[4] << 24) | (ea[5] << 16);
433 #endif
434 		eth_env_get_enetaddr("ethaddr", ea);
435 		fecp->palr =
436 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
437 		fecp->paur = (ea[4] << 24) | (ea[5] << 16);
438 	} else {
439 #ifdef CONFIG_SYS_FEC0_IOBASE
440 		volatile fec_t *fecp0 = (fec_t *) (CONFIG_SYS_FEC0_IOBASE);
441 		eth_env_get_enetaddr("ethaddr", ea);
442 		fecp0->palr =
443 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
444 		fecp0->paur = (ea[4] << 24) | (ea[5] << 16);
445 #endif
446 #ifdef CONFIG_SYS_FEC1_IOBASE
447 		eth_env_get_enetaddr("eth1addr", ea);
448 		fecp->palr =
449 		    (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
450 		fecp->paur = (ea[4] << 24) | (ea[5] << 16);
451 #endif
452 	}
453 
454 	/* Clear unicast address hash table */
455 	fecp->iaur = 0;
456 	fecp->ialr = 0;
457 
458 	/* Clear multicast address hash table */
459 	fecp->gaur = 0;
460 	fecp->galr = 0;
461 
462 	/* Set maximum receive buffer size. */
463 	fecp->emrbr = PKT_MAXBLR_SIZE;
464 
465 	/*
466 	 * Setup Buffers and Buffer Descriptors
467 	 */
468 	info->rxIdx = 0;
469 	info->txIdx = 0;
470 
471 	/*
472 	 * Setup Receiver Buffer Descriptors (13.14.24.18)
473 	 * Settings:
474 	 *     Empty, Wrap
475 	 */
476 	for (i = 0; i < PKTBUFSRX; i++) {
477 		info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
478 		info->rxbd[i].cbd_datlen = 0;	/* Reset */
479 		info->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
480 	}
481 	info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
482 
483 	/*
484 	 * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
485 	 * Settings:
486 	 *    Last, Tx CRC
487 	 */
488 	for (i = 0; i < TX_BUF_CNT; i++) {
489 		info->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
490 		info->txbd[i].cbd_datlen = 0;	/* Reset */
491 		info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
492 	}
493 	info->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
494 
495 	/* Set receive and transmit descriptor base */
496 	fecp->erdsr = (unsigned int)(&info->rxbd[0]);
497 	fecp->etdsr = (unsigned int)(&info->txbd[0]);
498 
499 	/* Now enable the transmit and receive processing */
500 	fecp->ecr |= FEC_ECR_ETHER_EN;
501 
502 	/* And last, try to fill Rx Buffer Descriptors */
503 	fecp->rdar = 0x01000000;	/* Descriptor polling active    */
504 
505 	return 1;
506 }
507 
fec_reset(struct eth_device * dev)508 void fec_reset(struct eth_device *dev)
509 {
510 	struct fec_info_s *info = dev->priv;
511 	volatile fec_t *fecp = (fec_t *) (info->iobase);
512 	int i;
513 
514 	fecp->ecr = FEC_ECR_RESET;
515 	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
516 		udelay(1);
517 	}
518 	if (i == FEC_RESET_DELAY) {
519 		printf("FEC_RESET_DELAY timeout\n");
520 	}
521 }
522 
fec_halt(struct eth_device * dev)523 void fec_halt(struct eth_device *dev)
524 {
525 	struct fec_info_s *info = dev->priv;
526 
527 	fec_reset(dev);
528 
529 	fecpin_setclear(dev, 0);
530 
531 	info->rxIdx = info->txIdx = 0;
532 	memset(info->rxbd, 0, PKTBUFSRX * sizeof(cbd_t));
533 	memset(info->txbd, 0, TX_BUF_CNT * sizeof(cbd_t));
534 	memset(info->txbuf, 0, DBUF_LENGTH);
535 }
536 
mcffec_initialize(bd_t * bis)537 int mcffec_initialize(bd_t * bis)
538 {
539 	struct eth_device *dev;
540 	int i;
541 #ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
542 	u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000;
543 #endif
544 
545 	for (i = 0; i < ARRAY_SIZE(fec_info); i++) {
546 
547 		dev =
548 		    (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
549 						  sizeof *dev);
550 		if (dev == NULL)
551 			hang();
552 
553 		memset(dev, 0, sizeof(*dev));
554 
555 		sprintf(dev->name, "FEC%d", fec_info[i].index);
556 
557 		dev->priv = &fec_info[i];
558 		dev->init = fec_init;
559 		dev->halt = fec_halt;
560 		dev->send = fec_send;
561 		dev->recv = fec_recv;
562 
563 		/* setup Receive and Transmit buffer descriptor */
564 #ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
565 		fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
566 		tmp = (u32)fec_info[i].rxbd;
567 		fec_info[i].txbd =
568 		    (cbd_t *)((u32)fec_info[i].txbd + tmp +
569 		    (PKTBUFSRX * sizeof(cbd_t)));
570 		tmp = (u32)fec_info[i].txbd;
571 		fec_info[i].txbuf =
572 		    (char *)((u32)fec_info[i].txbuf + tmp +
573 		    (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
574 		tmp = (u32)fec_info[i].txbuf;
575 #else
576 		fec_info[i].rxbd =
577 		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
578 				       (PKTBUFSRX * sizeof(cbd_t)));
579 		fec_info[i].txbd =
580 		    (cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
581 				       (TX_BUF_CNT * sizeof(cbd_t)));
582 		fec_info[i].txbuf =
583 		    (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
584 #endif
585 
586 #ifdef ET_DEBUG
587 		printf("rxbd %x txbd %x\n",
588 		       (int)fec_info[i].rxbd, (int)fec_info[i].txbd);
589 #endif
590 
591 		fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
592 
593 		eth_register(dev);
594 
595 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
596 		int retval;
597 		struct mii_dev *mdiodev = mdio_alloc();
598 		if (!mdiodev)
599 			return -ENOMEM;
600 		strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
601 		mdiodev->read = mcffec_miiphy_read;
602 		mdiodev->write = mcffec_miiphy_write;
603 
604 		retval = mdio_register(mdiodev);
605 		if (retval < 0)
606 			return retval;
607 #endif
608 		if (i > 0)
609 			fec_info[i - 1].next = &fec_info[i];
610 	}
611 	fec_info[i - 1].next = &fec_info[0];
612 
613 	/* default speed */
614 	bis->bi_ethspeed = 10;
615 
616 	return 0;
617 }
618