• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) Marvell International Ltd. and its affiliates
4  */
5 
6 #include <common.h>
7 #include <spl.h>
8 #include <asm/io.h>
9 #include <asm/arch/cpu.h>
10 #include <asm/arch/soc.h>
11 
12 #include "seq_exec.h"
13 #include "sys_env_lib.h"
14 
15 #ifdef CONFIG_ARMADA_38X
16 enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = {
17 /*                     6820    6810     6811     6828     */
18 /* PEX_UNIT_ID      */ { 4,     3,       3,       4},
19 /* ETH_GIG_UNIT_ID  */ { 3,	2,       3,       3},
20 /* USB3H_UNIT_ID    */ { 2,     2,       2,       2},
21 /* USB3D_UNIT_ID    */ { 1,     1,       1,       1},
22 /* SATA_UNIT_ID     */ { 2,     2,       2,       4},
23 /* QSGMII_UNIT_ID   */ { 1,     0,       0,       1},
24 /* XAUI_UNIT_ID     */ { 0,     0,       0,       0},
25 /* RXAUI_UNIT_ID    */ { 0,     0,       0,       0}
26 };
27 #else  /* if (CONFIG_ARMADA_39X) */
28 enum unit_id sys_env_soc_unit_nums[MAX_UNITS_ID][MAX_DEV_ID_NUM] = {
29 /*                      6920     6928     */
30 /* PEX_UNIT_ID      */ { 4,       4},
31 /* ETH_GIG_UNIT_ID  */ { 3,       4},
32 /* USB3H_UNIT_ID    */ { 1,       2},
33 /* USB3D_UNIT_ID    */ { 0,       1},
34 /* SATA_UNIT_ID     */ { 0,       4},
35 /* QSGMII_UNIT_ID   */ { 0,       1},
36 /* XAUI_UNIT_ID     */ { 1,       1},
37 /* RXAUI_UNIT_ID    */ { 1,	  1}
38 };
39 #endif
40 
41 u32 g_dev_id = -1;
42 
mv_board_id_get(void)43 u32 mv_board_id_get(void)
44 {
45 #if defined(CONFIG_TARGET_DB_88F6820_GP)
46 	return DB_GP_68XX_ID;
47 #else
48 	/*
49 	 * Return 0 here for custom board as this should not be used
50 	 * for custom boards.
51 	 */
52 	return 0;
53 #endif
54 }
55 
mv_board_tclk_get(void)56 u32 mv_board_tclk_get(void)
57 {
58 	u32 value;
59 
60 	value = (reg_read(DEVICE_SAMPLE_AT_RESET1_REG) >> 15) & 0x1;
61 
62 	switch (value) {
63 	case (0x0):
64 		return 250000000;
65 	case (0x1):
66 		return 200000000;
67 	default:
68 		return 0xffffffff;
69 	}
70 }
71 
mv_board_id_index_get(u32 board_id)72 u32 mv_board_id_index_get(u32 board_id)
73 {
74 	/*
75 	 * Marvell Boards use 0x10 as base for Board ID:
76 	 * mask MSB to receive index for board ID
77 	 */
78 	return board_id & (MARVELL_BOARD_ID_MASK - 1);
79 }
80 
81 /*
82  * sys_env_suspend_wakeup_check
83  * DESCRIPTION:		Reads GPIO input for suspend-wakeup indication.
84  * INPUT:		None.
85  * OUTPUT:
86  * RETURNS:		u32 indicating suspend wakeup status:
87  * 0 - Not supported,
88  * 1 - supported: read magic word detect wakeup,
89  * 2 - detected wakeup from GPIO.
90  */
sys_env_suspend_wakeup_check(void)91 enum suspend_wakeup_status sys_env_suspend_wakeup_check(void)
92 {
93 	u32 reg, board_id_index, gpio;
94 	struct board_wakeup_gpio board_gpio[] = MV_BOARD_WAKEUP_GPIO_INFO;
95 
96 	board_id_index = mv_board_id_index_get(mv_board_id_get());
97 	if (!(sizeof(board_gpio) / sizeof(struct board_wakeup_gpio) >
98 	      board_id_index)) {
99 		printf("\n_failed loading Suspend-Wakeup information (invalid board ID)\n");
100 		return SUSPEND_WAKEUP_DISABLED;
101 	}
102 
103 	/*
104 	 * - Detect if Suspend-Wakeup is supported on current board
105 	 * - Fetch the GPIO number for wakeup status input indication
106 	 */
107 	if (board_gpio[board_id_index].gpio_num == -1) {
108 		/* Suspend to RAM is not supported */
109 		return SUSPEND_WAKEUP_DISABLED;
110 	} else if (board_gpio[board_id_index].gpio_num == -2) {
111 		/*
112 		 * Suspend to RAM is supported but GPIO indication is
113 		 * not implemented - Skip
114 		 */
115 		return SUSPEND_WAKEUP_ENABLED;
116 	} else {
117 		gpio = board_gpio[board_id_index].gpio_num;
118 	}
119 
120 	/* Initialize MPP for GPIO (set MPP = 0x0) */
121 	reg = reg_read(MPP_CONTROL_REG(MPP_REG_NUM(gpio)));
122 	/* reset MPP21 to 0x0, keep rest of MPP settings*/
123 	reg &= ~MPP_MASK(gpio);
124 	reg_write(MPP_CONTROL_REG(MPP_REG_NUM(gpio)), reg);
125 
126 	/* Initialize GPIO as input */
127 	reg = reg_read(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio)));
128 	reg |= GPP_MASK(gpio);
129 	reg_write(GPP_DATA_OUT_EN_REG(GPP_REG_NUM(gpio)), reg);
130 
131 	/*
132 	 * Check GPP for input status from PIC: 0 - regular init,
133 	 * 1 - suspend wakeup
134 	 */
135 	reg = reg_read(GPP_DATA_IN_REG(GPP_REG_NUM(gpio)));
136 
137 	/* if GPIO is ON: wakeup from S2RAM indication detected */
138 	return (reg & GPP_MASK(gpio)) ? SUSPEND_WAKEUP_ENABLED_GPIO_DETECTED :
139 		SUSPEND_WAKEUP_DISABLED;
140 }
141 
142 /*
143  * mv_ctrl_dev_id_index_get
144  *
145  * DESCRIPTION: return SOC device index
146  * INPUT: None
147  * OUTPUT: None
148  * RETURN:
149  *        return SOC device index
150  */
sys_env_id_index_get(u32 ctrl_model)151 u32 sys_env_id_index_get(u32 ctrl_model)
152 {
153 	switch (ctrl_model) {
154 	case MV_6820_DEV_ID:
155 		return MV_6820_INDEX;
156 	case MV_6810_DEV_ID:
157 		return MV_6810_INDEX;
158 	case MV_6811_DEV_ID:
159 		return MV_6811_INDEX;
160 	case MV_6828_DEV_ID:
161 		return MV_6828_INDEX;
162 	case MV_6920_DEV_ID:
163 		return MV_6920_INDEX;
164 	case MV_6928_DEV_ID:
165 		return MV_6928_INDEX;
166 	default:
167 		return MV_6820_INDEX;
168 	}
169 }
170 
sys_env_unit_max_num_get(enum unit_id unit)171 u32 sys_env_unit_max_num_get(enum unit_id unit)
172 {
173 	u32 dev_id_index;
174 
175 	if (unit >= MAX_UNITS_ID) {
176 		printf("%s: Error: Wrong unit type (%u)\n", __func__, unit);
177 		return 0;
178 	}
179 
180 	dev_id_index = sys_env_id_index_get(sys_env_model_get());
181 	return sys_env_soc_unit_nums[unit][dev_id_index];
182 }
183 
184 /*
185  * sys_env_model_get
186  * DESCRIPTION:	Returns 16bit describing the device model (ID) as defined
187  *		in Vendor ID configuration register
188  */
sys_env_model_get(void)189 u16 sys_env_model_get(void)
190 {
191 	u32 default_ctrl_id, ctrl_id = reg_read(DEV_ID_REG);
192 	ctrl_id = (ctrl_id & (DEV_ID_REG_DEVICE_ID_MASK)) >>
193 		DEV_ID_REG_DEVICE_ID_OFFS;
194 
195 	switch (ctrl_id) {
196 	case MV_6820_DEV_ID:
197 	case MV_6810_DEV_ID:
198 	case MV_6811_DEV_ID:
199 	case MV_6828_DEV_ID:
200 	case MV_6920_DEV_ID:
201 	case MV_6928_DEV_ID:
202 		return ctrl_id;
203 	default:
204 		/* Device ID Default for A38x: 6820 , for A39x: 6920 */
205 	#ifdef CONFIG_ARMADA_38X
206 		default_ctrl_id =  MV_6820_DEV_ID;
207 	#else
208 		default_ctrl_id = MV_6920_DEV_ID;
209 	#endif
210 		printf("%s: Error retrieving device ID (%x), using default ID = %x\n",
211 		       __func__, ctrl_id, default_ctrl_id);
212 		return default_ctrl_id;
213 	}
214 }
215 
216 /*
217  * sys_env_device_id_get
218  * DESCRIPTION:	Returns enum (0..7) index of the device model (ID)
219  */
sys_env_device_id_get(void)220 u32 sys_env_device_id_get(void)
221 {
222 	char *device_id_str[7] = {
223 		"6810", "6820", "6811", "6828", "NONE", "6920", "6928"
224 	};
225 
226 	if (g_dev_id != -1)
227 		return g_dev_id;
228 
229 	g_dev_id = reg_read(DEVICE_SAMPLE_AT_RESET1_REG);
230 	g_dev_id = g_dev_id >> SAR_DEV_ID_OFFS & SAR_DEV_ID_MASK;
231 	printf("Detected Device ID %s\n", device_id_str[g_dev_id]);
232 
233 	return g_dev_id;
234 }
235 
236 /*
237  * sys_env_device_rev_get - Get Marvell controller device revision number
238  *
239  * DESCRIPTION:
240  *       This function returns 8bit describing the device revision as defined
241  *       Revision ID Register.
242  *
243  * INPUT:
244  *       None.
245  *
246  * OUTPUT:
247  *       None.
248  *
249  * RETURN:
250  *       8bit desscribing Marvell controller revision number
251  */
sys_env_device_rev_get(void)252 u8 sys_env_device_rev_get(void)
253 {
254 	u32 value;
255 
256 	value = reg_read(DEV_VERSION_ID_REG);
257 	return (value & (REVISON_ID_MASK)) >> REVISON_ID_OFFS;
258 }
259