• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) Marvell International Ltd. and its affiliates
4  */
5 
6 #include <common.h>
7 #include <i2c.h>
8 #include <spl.h>
9 #include <asm/io.h>
10 #include <asm/arch/cpu.h>
11 #include <asm/arch/soc.h>
12 
13 #include "ddr3_init.h"
14 #include "ddr3_hw_training.h"
15 #include "xor.h"
16 
17 #ifdef MV88F78X60
18 #include "ddr3_patterns_64bit.h"
19 #else
20 #include "ddr3_patterns_16bit.h"
21 #if defined(MV88F672X)
22 #include "ddr3_patterns_16bit.h"
23 #endif
24 #endif
25 
26 /*
27  * Debug
28  */
29 
30 #define DEBUG_MAIN_C(s, d, l) \
31 	DEBUG_MAIN_S(s); DEBUG_MAIN_D(d, l); DEBUG_MAIN_S("\n")
32 #define DEBUG_MAIN_FULL_C(s, d, l) \
33 	DEBUG_MAIN_FULL_S(s); DEBUG_MAIN_FULL_D(d, l); DEBUG_MAIN_FULL_S("\n")
34 
35 #ifdef MV_DEBUG_MAIN
36 #define DEBUG_MAIN_S(s)			puts(s)
37 #define DEBUG_MAIN_D(d, l)		printf("%x", d)
38 #else
39 #define DEBUG_MAIN_S(s)
40 #define DEBUG_MAIN_D(d, l)
41 #endif
42 
43 #ifdef MV_DEBUG_MAIN_FULL
44 #define DEBUG_MAIN_FULL_S(s)		puts(s)
45 #define DEBUG_MAIN_FULL_D(d, l)		printf("%x", d)
46 #else
47 #define DEBUG_MAIN_FULL_S(s)
48 #define DEBUG_MAIN_FULL_D(d, l)
49 #endif
50 
51 #ifdef MV_DEBUG_SUSPEND_RESUME
52 #define DEBUG_SUSPEND_RESUME_S(s)	puts(s)
53 #define DEBUG_SUSPEND_RESUME_D(d, l)	printf("%x", d)
54 #else
55 #define DEBUG_SUSPEND_RESUME_S(s)
56 #define DEBUG_SUSPEND_RESUME_D(d, l)
57 #endif
58 
59 static u32 ddr3_sw_wl_rl_debug;
60 static u32 ddr3_run_pbs = 1;
61 
ddr3_print_version(void)62 void ddr3_print_version(void)
63 {
64 	puts("DDR3 Training Sequence - Ver 5.7.");
65 }
66 
ddr3_set_sw_wl_rl_debug(u32 val)67 void ddr3_set_sw_wl_rl_debug(u32 val)
68 {
69 	ddr3_sw_wl_rl_debug = val;
70 }
71 
ddr3_set_pbs(u32 val)72 void ddr3_set_pbs(u32 val)
73 {
74 	ddr3_run_pbs = val;
75 }
76 
ddr3_hw_training(u32 target_freq,u32 ddr_width,int xor_bypass,u32 scrub_offs,u32 scrub_size,int dqs_clk_aligned,int debug_mode,int reg_dimm_skip_wl)77 int ddr3_hw_training(u32 target_freq, u32 ddr_width, int xor_bypass,
78 		     u32 scrub_offs, u32 scrub_size, int dqs_clk_aligned,
79 		     int debug_mode, int reg_dimm_skip_wl)
80 {
81 	/* A370 has no PBS mechanism */
82 	__maybe_unused u32 first_loop_flag = 0;
83 	u32 freq, reg;
84 	MV_DRAM_INFO dram_info;
85 	int ratio_2to1 = 0;
86 	int tmp_ratio = 1;
87 	int status;
88 
89 	if (debug_mode)
90 		DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 1\n");
91 
92 	memset(&dram_info, 0, sizeof(dram_info));
93 	dram_info.num_cs = ddr3_get_cs_num_from_reg();
94 	dram_info.cs_ena = ddr3_get_cs_ena_from_reg();
95 	dram_info.target_frequency = target_freq;
96 	dram_info.ddr_width = ddr_width;
97 	dram_info.num_of_std_pups = ddr_width / PUP_SIZE;
98 	dram_info.rl400_bug = 0;
99 	dram_info.multi_cs_mr_support = 0;
100 #ifdef MV88F67XX
101 	dram_info.rl400_bug = 1;
102 #endif
103 
104 	/* Ignore ECC errors - if ECC is enabled */
105 	reg = reg_read(REG_SDRAM_CONFIG_ADDR);
106 	if (reg & (1 << REG_SDRAM_CONFIG_ECC_OFFS)) {
107 		dram_info.ecc_ena = 1;
108 		reg |= (1 << REG_SDRAM_CONFIG_IERR_OFFS);
109 		reg_write(REG_SDRAM_CONFIG_ADDR, reg);
110 	} else {
111 		dram_info.ecc_ena = 0;
112 	}
113 
114 	reg = reg_read(REG_SDRAM_CONFIG_ADDR);
115 	if (reg & (1 << REG_SDRAM_CONFIG_REGDIMM_OFFS))
116 		dram_info.reg_dimm = 1;
117 	else
118 		dram_info.reg_dimm = 0;
119 
120 	dram_info.num_of_total_pups = ddr_width / PUP_SIZE + dram_info.ecc_ena;
121 
122 	/* Get target 2T value */
123 	reg = reg_read(REG_DUNIT_CTRL_LOW_ADDR);
124 	dram_info.mode_2t = (reg >> REG_DUNIT_CTRL_LOW_2T_OFFS) &
125 		REG_DUNIT_CTRL_LOW_2T_MASK;
126 
127 	/* Get target CL value */
128 #ifdef MV88F67XX
129 	reg = reg_read(REG_DDR3_MR0_ADDR) >> 2;
130 #else
131 	reg = reg_read(REG_DDR3_MR0_CS_ADDR) >> 2;
132 #endif
133 
134 	reg = (((reg >> 1) & 0xE) | (reg & 0x1)) & 0xF;
135 	dram_info.cl = ddr3_valid_cl_to_cl(reg);
136 
137 	/* Get target CWL value */
138 #ifdef MV88F67XX
139 	reg = reg_read(REG_DDR3_MR2_ADDR) >> REG_DDR3_MR2_CWL_OFFS;
140 #else
141 	reg = reg_read(REG_DDR3_MR2_CS_ADDR) >> REG_DDR3_MR2_CWL_OFFS;
142 #endif
143 
144 	reg &= REG_DDR3_MR2_CWL_MASK;
145 	dram_info.cwl = reg;
146 #if !defined(MV88F67XX)
147 	/* A370 has no PBS mechanism */
148 #if defined(MV88F78X60)
149 	if ((dram_info.target_frequency > DDR_400) && (ddr3_run_pbs))
150 		first_loop_flag = 1;
151 #else
152 	/* first_loop_flag = 1; skip mid freq at ALP/A375 */
153 	if ((dram_info.target_frequency > DDR_400) && (ddr3_run_pbs) &&
154 	    (mv_ctrl_revision_get() >= UMC_A0))
155 		first_loop_flag = 1;
156 	else
157 		first_loop_flag = 0;
158 #endif
159 #endif
160 
161 	freq = dram_info.target_frequency;
162 
163 	/* Set ODT to always on */
164 	ddr3_odt_activate(1);
165 
166 	/* Init XOR */
167 	mv_sys_xor_init(&dram_info);
168 
169 	/* Get DRAM/HCLK ratio */
170 	if (reg_read(REG_DDR_IO_ADDR) & (1 << REG_DDR_IO_CLK_RATIO_OFFS))
171 		ratio_2to1 = 1;
172 
173 	/*
174 	 * Xor Bypass - ECC support in AXP is currently available for 1:1
175 	 * modes frequency modes.
176 	 * Not all frequency modes support the ddr3 training sequence
177 	 * (Only 1200/300).
178 	 * Xor Bypass allows using the Xor initializations and scrubbing
179 	 * inside the ddr3 training sequence without running the training
180 	 * itself.
181 	 */
182 	if (xor_bypass == 0) {
183 		if (ddr3_run_pbs) {
184 			DEBUG_MAIN_S("DDR3 Training Sequence - Run with PBS.\n");
185 		} else {
186 			DEBUG_MAIN_S("DDR3 Training Sequence - Run without PBS.\n");
187 		}
188 
189 		if (dram_info.target_frequency > DFS_MARGIN) {
190 			tmp_ratio = 0;
191 			freq = DDR_100;
192 
193 			if (dram_info.reg_dimm == 1)
194 				freq = DDR_300;
195 
196 			if (MV_OK != ddr3_dfs_high_2_low(freq, &dram_info)) {
197 				/* Set low - 100Mhz DDR Frequency by HW */
198 				DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Dfs High2Low)\n");
199 				return MV_DDR3_TRAINING_ERR_DFS_H2L;
200 			}
201 
202 			if ((dram_info.reg_dimm == 1) &&
203 			    (reg_dimm_skip_wl == 0)) {
204 				if (MV_OK !=
205 				    ddr3_write_leveling_hw_reg_dimm(freq,
206 								    &dram_info))
207 					DEBUG_MAIN_S("DDR3 Training Sequence - Registered DIMM Low WL - SKIP\n");
208 			}
209 
210 			if (ddr3_get_log_level() >= MV_LOG_LEVEL_1)
211 				ddr3_print_freq(freq);
212 
213 			if (debug_mode)
214 				DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 2\n");
215 		} else {
216 			if (!dqs_clk_aligned) {
217 #ifdef MV88F67XX
218 				/*
219 				 * If running training sequence without DFS,
220 				 * we must run Write leveling before writing
221 				 * the patterns
222 				 */
223 
224 				/*
225 				 * ODT - Multi CS system use SW WL,
226 				 * Single CS System use HW WL
227 				 */
228 				if (dram_info.cs_ena > 1) {
229 					if (MV_OK !=
230 					    ddr3_write_leveling_sw(
231 						    freq, tmp_ratio,
232 						    &dram_info)) {
233 						DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Sw)\n");
234 						return MV_DDR3_TRAINING_ERR_WR_LVL_SW;
235 					}
236 				} else {
237 					if (MV_OK !=
238 					    ddr3_write_leveling_hw(freq,
239 								   &dram_info)) {
240 						DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n");
241 						return MV_DDR3_TRAINING_ERR_WR_LVL_HW;
242 					}
243 				}
244 #else
245 				if (MV_OK != ddr3_write_leveling_hw(
246 					    freq, &dram_info)) {
247 					DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n");
248 					if (ddr3_sw_wl_rl_debug) {
249 						if (MV_OK !=
250 						    ddr3_write_leveling_sw(
251 							    freq, tmp_ratio,
252 							    &dram_info)) {
253 							DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Sw)\n");
254 							return MV_DDR3_TRAINING_ERR_WR_LVL_SW;
255 						}
256 					} else {
257 						return MV_DDR3_TRAINING_ERR_WR_LVL_HW;
258 					}
259 				}
260 #endif
261 			}
262 
263 			if (debug_mode)
264 				DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 3\n");
265 		}
266 
267 		if (MV_OK != ddr3_load_patterns(&dram_info, 0)) {
268 			DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Loading Patterns)\n");
269 			return MV_DDR3_TRAINING_ERR_LOAD_PATTERNS;
270 		}
271 
272 		/*
273 		 * TODO:
274 		 * The mainline U-Boot port of the bin_hdr DDR training code
275 		 * needs a delay of minimum 20ms here (10ms is a bit too short
276 		 * and the CPU hangs). The bin_hdr code doesn't have this delay.
277 		 * To be save here, lets add a delay of 50ms here.
278 		 *
279 		 * Tested on the Marvell DB-MV784MP-GP board
280 		 */
281 		mdelay(50);
282 
283 		do {
284 			freq = dram_info.target_frequency;
285 			tmp_ratio = ratio_2to1;
286 			DEBUG_MAIN_FULL_S("DDR3 Training Sequence - DEBUG - 4\n");
287 
288 #if defined(MV88F78X60)
289 			/*
290 			 * There is a difference on the DFS frequency at the
291 			 * first iteration of this loop
292 			 */
293 			if (first_loop_flag) {
294 				freq = DDR_400;
295 				tmp_ratio = 0;
296 			}
297 #endif
298 
299 			if (MV_OK != ddr3_dfs_low_2_high(freq, tmp_ratio,
300 							 &dram_info)) {
301 				DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Dfs Low2High)\n");
302 				return MV_DDR3_TRAINING_ERR_DFS_H2L;
303 			}
304 
305 			if (ddr3_get_log_level() >= MV_LOG_LEVEL_1) {
306 				ddr3_print_freq(freq);
307 			}
308 
309 			if (debug_mode)
310 				DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 5\n");
311 
312 			/* Write leveling */
313 			if (!dqs_clk_aligned) {
314 #ifdef MV88F67XX
315 				/*
316 				 * ODT - Multi CS system that not support Multi
317 				 * CS MRS commands must use SW WL
318 				 */
319 				if (dram_info.cs_ena > 1) {
320 					if (MV_OK != ddr3_write_leveling_sw(
321 						    freq, tmp_ratio, &dram_info)) {
322 						DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Sw)\n");
323 						return MV_DDR3_TRAINING_ERR_WR_LVL_SW;
324 					}
325 				} else {
326 					if (MV_OK != ddr3_write_leveling_hw(
327 						    freq, &dram_info)) {
328 						DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n");
329 						return MV_DDR3_TRAINING_ERR_WR_LVL_HW;
330 					}
331 				}
332 #else
333 				if ((dram_info.reg_dimm == 1) &&
334 				    (freq == DDR_400)) {
335 					if (reg_dimm_skip_wl == 0) {
336 						if (MV_OK != ddr3_write_leveling_hw_reg_dimm(
337 							    freq, &dram_info))
338 							DEBUG_MAIN_S("DDR3 Training Sequence - Registered DIMM WL - SKIP\n");
339 					}
340 				} else {
341 					if (MV_OK != ddr3_write_leveling_hw(
342 						    freq, &dram_info)) {
343 						DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n");
344 						if (ddr3_sw_wl_rl_debug) {
345 							if (MV_OK != ddr3_write_leveling_sw(
346 								    freq, tmp_ratio, &dram_info)) {
347 								DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Sw)\n");
348 								return MV_DDR3_TRAINING_ERR_WR_LVL_SW;
349 							}
350 						} else {
351 							return MV_DDR3_TRAINING_ERR_WR_LVL_HW;
352 						}
353 					}
354 				}
355 #endif
356 				if (debug_mode)
357 					DEBUG_MAIN_S
358 					    ("DDR3 Training Sequence - DEBUG - 6\n");
359 			}
360 
361 			/* Read Leveling */
362 			/*
363 			 * Armada 370 - Support for HCLK @ 400MHZ - must use
364 			 * SW read leveling
365 			 */
366 			if (freq == DDR_400 && dram_info.rl400_bug) {
367 				status = ddr3_read_leveling_sw(freq, tmp_ratio,
368 						       &dram_info);
369 				if (MV_OK != status) {
370 					DEBUG_MAIN_S
371 					    ("DDR3 Training Sequence - FAILED (Read Leveling Sw)\n");
372 					return status;
373 				}
374 			} else {
375 				if (MV_OK != ddr3_read_leveling_hw(
376 					    freq, &dram_info)) {
377 					DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Read Leveling Hw)\n");
378 					if (ddr3_sw_wl_rl_debug) {
379 						if (MV_OK != ddr3_read_leveling_sw(
380 							    freq, tmp_ratio,
381 							    &dram_info)) {
382 							DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Read Leveling Sw)\n");
383 							return MV_DDR3_TRAINING_ERR_WR_LVL_SW;
384 						}
385 					} else {
386 						return MV_DDR3_TRAINING_ERR_WR_LVL_HW;
387 					}
388 				}
389 			}
390 
391 			if (debug_mode)
392 				DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 7\n");
393 
394 			if (MV_OK != ddr3_wl_supplement(&dram_info)) {
395 				DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hi-Freq Sup)\n");
396 				return MV_DDR3_TRAINING_ERR_WR_LVL_HI_FREQ;
397 			}
398 
399 			if (debug_mode)
400 				DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 8\n");
401 #if !defined(MV88F67XX)
402 			/* A370 has no PBS mechanism */
403 #if defined(MV88F78X60) || defined(MV88F672X)
404 			if (first_loop_flag == 1) {
405 				first_loop_flag = 0;
406 
407 				status = MV_OK;
408 				status = ddr3_pbs_rx(&dram_info);
409 				if (MV_OK != status) {
410 					DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (PBS RX)\n");
411 					return status;
412 				}
413 
414 				if (debug_mode)
415 					DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 9\n");
416 
417 				status = ddr3_pbs_tx(&dram_info);
418 				if (MV_OK != status) {
419 					DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (PBS TX)\n");
420 					return status;
421 				}
422 
423 				if (debug_mode)
424 					DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 10\n");
425 			}
426 #endif
427 #endif
428 		} while (freq != dram_info.target_frequency);
429 
430 		status = ddr3_dqs_centralization_rx(&dram_info);
431 		if (MV_OK != status) {
432 			DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (DQS Centralization RX)\n");
433 			return status;
434 		}
435 
436 		if (debug_mode)
437 			DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 11\n");
438 
439 		status = ddr3_dqs_centralization_tx(&dram_info);
440 		if (MV_OK != status) {
441 			DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (DQS Centralization TX)\n");
442 			return status;
443 		}
444 
445 		if (debug_mode)
446 			DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 12\n");
447 	}
448 
449 	ddr3_set_performance_params(&dram_info);
450 
451 	if (dram_info.ecc_ena) {
452 		/* Need to SCRUB the DRAM memory area to load U-Boot */
453 		mv_sys_xor_finish();
454 		dram_info.num_cs = 1;
455 		dram_info.cs_ena = 1;
456 		mv_sys_xor_init(&dram_info);
457 		mv_xor_mem_init(0, scrub_offs, scrub_size, 0xdeadbeef,
458 				0xdeadbeef);
459 
460 		/* Wait for previous transfer completion */
461 		while (mv_xor_state_get(0) != MV_IDLE)
462 			;
463 
464 		if (debug_mode)
465 			DEBUG_MAIN_S("DDR3 Training Sequence - DEBUG - 13\n");
466 	}
467 
468 	/* Return XOR State */
469 	mv_sys_xor_finish();
470 
471 #if defined(MV88F78X60)
472 	/* Save training results in memeory for resume state */
473 	ddr3_save_training(&dram_info);
474 #endif
475 	/* Clear ODT always on */
476 	ddr3_odt_activate(0);
477 
478 	/* Configure Dynamic read ODT */
479 	ddr3_odt_read_dynamic_config(&dram_info);
480 
481 	return MV_OK;
482 }
483 
ddr3_set_performance_params(MV_DRAM_INFO * dram_info)484 void ddr3_set_performance_params(MV_DRAM_INFO *dram_info)
485 {
486 	u32 twr2wr, trd2rd, trd2wr_wr2rd;
487 	u32 tmp1, tmp2, reg;
488 
489 	DEBUG_MAIN_FULL_C("Max WL Phase: ", dram_info->wl_max_phase, 2);
490 	DEBUG_MAIN_FULL_C("Min WL Phase: ", dram_info->wl_min_phase, 2);
491 	DEBUG_MAIN_FULL_C("Max RL Phase: ", dram_info->rl_max_phase, 2);
492 	DEBUG_MAIN_FULL_C("Min RL Phase: ", dram_info->rl_min_phase, 2);
493 
494 	if (dram_info->wl_max_phase < 2)
495 		twr2wr = 0x2;
496 	else
497 		twr2wr = 0x3;
498 
499 	trd2rd = 0x1 + (dram_info->rl_max_phase + 1) / 2 +
500 		(dram_info->rl_max_phase + 1) % 2;
501 
502 	tmp1 = (dram_info->rl_max_phase - dram_info->wl_min_phase) / 2 +
503 		(((dram_info->rl_max_phase - dram_info->wl_min_phase) % 2) >
504 		 0 ? 1 : 0);
505 	tmp2 = (dram_info->wl_max_phase - dram_info->rl_min_phase) / 2 +
506 		((dram_info->wl_max_phase - dram_info->rl_min_phase) % 2 >
507 		 0 ? 1 : 0);
508 	trd2wr_wr2rd = (tmp1 >= tmp2) ? tmp1 : tmp2;
509 
510 	trd2wr_wr2rd += 2;
511 	trd2rd += 2;
512 	twr2wr += 2;
513 
514 	DEBUG_MAIN_FULL_C("WR 2 WR: ", twr2wr, 2);
515 	DEBUG_MAIN_FULL_C("RD 2 RD: ", trd2rd, 2);
516 	DEBUG_MAIN_FULL_C("RD 2 WR / WR 2 RD: ", trd2wr_wr2rd, 2);
517 
518 	reg = reg_read(REG_SDRAM_TIMING_HIGH_ADDR);
519 
520 	reg &= ~(REG_SDRAM_TIMING_H_W2W_MASK << REG_SDRAM_TIMING_H_W2W_OFFS);
521 	reg |= ((twr2wr & REG_SDRAM_TIMING_H_W2W_MASK) <<
522 		REG_SDRAM_TIMING_H_W2W_OFFS);
523 
524 	reg &= ~(REG_SDRAM_TIMING_H_R2R_MASK << REG_SDRAM_TIMING_H_R2R_OFFS);
525 	reg &= ~(REG_SDRAM_TIMING_H_R2R_H_MASK <<
526 		 REG_SDRAM_TIMING_H_R2R_H_OFFS);
527 	reg |= ((trd2rd & REG_SDRAM_TIMING_H_R2R_MASK) <<
528 		REG_SDRAM_TIMING_H_R2R_OFFS);
529 	reg |= (((trd2rd >> 2) & REG_SDRAM_TIMING_H_R2R_H_MASK) <<
530 		REG_SDRAM_TIMING_H_R2R_H_OFFS);
531 
532 	reg &= ~(REG_SDRAM_TIMING_H_R2W_W2R_MASK <<
533 		 REG_SDRAM_TIMING_H_R2W_W2R_OFFS);
534 	reg &= ~(REG_SDRAM_TIMING_H_R2W_W2R_H_MASK <<
535 		 REG_SDRAM_TIMING_H_R2W_W2R_H_OFFS);
536 	reg |= ((trd2wr_wr2rd & REG_SDRAM_TIMING_H_R2W_W2R_MASK) <<
537 		REG_SDRAM_TIMING_H_R2W_W2R_OFFS);
538 	reg |= (((trd2wr_wr2rd >> 2) & REG_SDRAM_TIMING_H_R2W_W2R_H_MASK) <<
539 		REG_SDRAM_TIMING_H_R2W_W2R_H_OFFS);
540 
541 	reg_write(REG_SDRAM_TIMING_HIGH_ADDR, reg);
542 }
543 
544 /*
545  * Perform DDR3 PUP Indirect Write
546  */
ddr3_write_pup_reg(u32 mode,u32 cs,u32 pup,u32 phase,u32 delay)547 void ddr3_write_pup_reg(u32 mode, u32 cs, u32 pup, u32 phase, u32 delay)
548 {
549 	u32 reg = 0;
550 
551 	if (pup == PUP_BC)
552 		reg |= (1 << REG_PHY_BC_OFFS);
553 	else
554 		reg |= (pup << REG_PHY_PUP_OFFS);
555 
556 	reg |= ((0x4 * cs + mode) << REG_PHY_CS_OFFS);
557 	reg |= (phase << REG_PHY_PHASE_OFFS) | delay;
558 
559 	if (mode == PUP_WL_MODE)
560 		reg |= ((INIT_WL_DELAY + delay) << REG_PHY_DQS_REF_DLY_OFFS);
561 
562 	reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg);	/* 0x16A0 */
563 	reg |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR;
564 	reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg);	/* 0x16A0 */
565 
566 	do {
567 		reg = reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR) &
568 			REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE;
569 	} while (reg);	/* Wait for '0' to mark the end of the transaction */
570 
571 	/* If read Leveling mode - need to write to register 3 separetly */
572 	if (mode == PUP_RL_MODE) {
573 		reg = 0;
574 
575 		if (pup == PUP_BC)
576 			reg |= (1 << REG_PHY_BC_OFFS);
577 		else
578 			reg |= (pup << REG_PHY_PUP_OFFS);
579 
580 		reg |= ((0x4 * cs + mode + 1) << REG_PHY_CS_OFFS);
581 		reg |= (INIT_RL_DELAY);
582 
583 		reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */
584 		reg |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR;
585 		reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg); /* 0x16A0 */
586 
587 		do {
588 			reg = reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR) &
589 				REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE;
590 		} while (reg);
591 	}
592 }
593 
594 /*
595  * Perform DDR3 PUP Indirect Read
596  */
ddr3_read_pup_reg(u32 mode,u32 cs,u32 pup)597 u32 ddr3_read_pup_reg(u32 mode, u32 cs, u32 pup)
598 {
599 	u32 reg;
600 
601 	reg = (pup << REG_PHY_PUP_OFFS) |
602 		((0x4 * cs + mode) << REG_PHY_CS_OFFS);
603 	reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg);	/* 0x16A0 */
604 
605 	reg |= REG_PHY_REGISTRY_FILE_ACCESS_OP_RD;
606 	reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, reg);	/* 0x16A0 */
607 
608 	do {
609 		reg = reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR) &
610 			REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE;
611 	} while (reg);	/* Wait for '0' to mark the end of the transaction */
612 
613 	return reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR);	/* 0x16A0 */
614 }
615 
616 /*
617  * Set training patterns
618  */
ddr3_load_patterns(MV_DRAM_INFO * dram_info,int resume)619 int ddr3_load_patterns(MV_DRAM_INFO *dram_info, int resume)
620 {
621 	u32 reg;
622 
623 	/* Enable SW override - Required for the ECC Pup */
624 	reg = reg_read(REG_DRAM_TRAINING_2_ADDR) |
625 		(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
626 
627 	/* [0] = 1 - Enable SW override  */
628 	/* 0x15B8 - Training SW 2 Register */
629 	reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
630 
631 	reg = (1 << REG_DRAM_TRAINING_AUTO_OFFS);
632 	reg_write(REG_DRAM_TRAINING_ADDR, reg);	/* 0x15B0 - Training Register */
633 
634 	if (resume == 0) {
635 #if defined(MV88F78X60) || defined(MV88F672X)
636 		ddr3_load_pbs_patterns(dram_info);
637 #endif
638 		ddr3_load_dqs_patterns(dram_info);
639 	}
640 
641 	/* Disable SW override - Must be in a different stage */
642 	/* [0]=0 - Enable SW override  */
643 	reg = reg_read(REG_DRAM_TRAINING_2_ADDR);
644 	reg &= ~(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS);
645 	/* 0x15B8 - Training SW 2 Register */
646 	reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
647 
648 	reg = reg_read(REG_DRAM_TRAINING_1_ADDR) |
649 		(1 << REG_DRAM_TRAINING_1_TRNBPOINT_OFFS);
650 	reg_write(REG_DRAM_TRAINING_1_ADDR, reg);
651 
652 	/* Set Base Addr */
653 #if defined(MV88F67XX)
654 	reg_write(REG_DRAM_TRAINING_PATTERN_BASE_ADDR, 0);
655 #else
656 	if (resume == 0)
657 		reg_write(REG_DRAM_TRAINING_PATTERN_BASE_ADDR, 0);
658 	else
659 		reg_write(REG_DRAM_TRAINING_PATTERN_BASE_ADDR,
660 			  RESUME_RL_PATTERNS_ADDR);
661 #endif
662 
663 	/* Set Patterns */
664 	if (resume == 0) {
665 		reg = (dram_info->cs_ena << REG_DRAM_TRAINING_CS_OFFS) |
666 			(1 << REG_DRAM_TRAINING_PATTERNS_OFFS);
667 	} else {
668 		reg = (0x1 << REG_DRAM_TRAINING_CS_OFFS) |
669 			(1 << REG_DRAM_TRAINING_PATTERNS_OFFS);
670 	}
671 
672 	reg |= (1 << REG_DRAM_TRAINING_AUTO_OFFS);
673 
674 	reg_write(REG_DRAM_TRAINING_ADDR, reg);
675 
676 	udelay(100);
677 
678 	/* Check if Successful */
679 	if (reg_read(REG_DRAM_TRAINING_ADDR) &
680 	    (1 << REG_DRAM_TRAINING_ERROR_OFFS))
681 		return MV_OK;
682 	else
683 		return MV_FAIL;
684 }
685 
686 #if !defined(MV88F67XX)
687 /*
688  * Name:     ddr3_save_training(MV_DRAM_INFO *dram_info)
689  * Desc:     saves the training results to memeory (RL,WL,PBS,Rx/Tx
690  *           Centeralization)
691  * Args:     MV_DRAM_INFO *dram_info
692  * Notes:
693  * Returns:  None.
694  */
ddr3_save_training(MV_DRAM_INFO * dram_info)695 void ddr3_save_training(MV_DRAM_INFO *dram_info)
696 {
697 	u32 val, pup, tmp_cs, cs, i, dq;
698 	u32 crc = 0;
699 	u32 regs = 0;
700 	u32 *sdram_offset = (u32 *)RESUME_TRAINING_VALUES_ADDR;
701 	u32 mode_config[MAX_TRAINING_MODE];
702 
703 	mode_config[DQS_WR_MODE] = PUP_DQS_WR;
704 	mode_config[WL_MODE_] = PUP_WL_MODE;
705 	mode_config[RL_MODE_] = PUP_RL_MODE;
706 	mode_config[DQS_RD_MODE] = PUP_DQS_RD;
707 	mode_config[PBS_TX_DM_MODE] = PUP_PBS_TX_DM;
708 	mode_config[PBS_TX_MODE] = PUP_PBS_TX;
709 	mode_config[PBS_RX_MODE] = PUP_PBS_RX;
710 
711 	/* num of training modes */
712 	for (i = 0; i < MAX_TRAINING_MODE; i++) {
713 		tmp_cs = dram_info->cs_ena;
714 		/* num of CS */
715 		for (cs = 0; cs < MAX_CS; cs++) {
716 			if (tmp_cs & (1 << cs)) {
717 				/* num of PUPs */
718 				for (pup = 0; pup < dram_info->num_of_total_pups;
719 				     pup++) {
720 					if (pup == dram_info->num_of_std_pups &&
721 					    dram_info->ecc_ena)
722 						pup = ECC_PUP;
723 					if (i == PBS_TX_DM_MODE) {
724 						/*
725 						 * Change CS bitmask because
726 						 * PBS works only with CS0
727 						 */
728 						tmp_cs = 0x1;
729 						val = ddr3_read_pup_reg(
730 							mode_config[i], CS0, pup);
731 					} else if (i == PBS_TX_MODE ||
732 						   i == PBS_RX_MODE) {
733 						/*
734 						 * Change CS bitmask because
735 						 * PBS works only with CS0
736 						 */
737 						tmp_cs = 0x1;
738 						for (dq = 0; dq <= DQ_NUM;
739 						     dq++) {
740 							val = ddr3_read_pup_reg(
741 								mode_config[i] + dq,
742 								CS0,
743 								pup);
744 							(*sdram_offset) = val;
745 							crc += *sdram_offset;
746 							sdram_offset++;
747 							regs++;
748 						}
749 						continue;
750 					} else {
751 						val = ddr3_read_pup_reg(
752 							mode_config[i], cs, pup);
753 					}
754 
755 					*sdram_offset = val;
756 					crc += *sdram_offset;
757 					sdram_offset++;
758 					regs++;
759 				}
760 			}
761 		}
762 	}
763 
764 	*sdram_offset = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR);
765 	crc += *sdram_offset;
766 	sdram_offset++;
767 	regs++;
768 	*sdram_offset = reg_read(REG_READ_DATA_READY_DELAYS_ADDR);
769 	crc += *sdram_offset;
770 	sdram_offset++;
771 	regs++;
772 	sdram_offset = (u32 *)NUM_OF_REGISTER_ADDR;
773 	*sdram_offset = regs;
774 	DEBUG_SUSPEND_RESUME_S("Training Results CheckSum write= ");
775 	DEBUG_SUSPEND_RESUME_D(crc, 8);
776 	DEBUG_SUSPEND_RESUME_S("\n");
777 	sdram_offset = (u32 *)CHECKSUM_RESULT_ADDR;
778 	*sdram_offset = crc;
779 }
780 
781 /*
782  * Name:     ddr3_read_training_results()
783  * Desc:     Reads the training results from memeory (RL,WL,PBS,Rx/Tx
784  *           Centeralization)
785  *           and writes them to the relevant registers
786  * Args:     MV_DRAM_INFO *dram_info
787  * Notes:
788  * Returns:  None.
789  */
ddr3_read_training_results(void)790 int ddr3_read_training_results(void)
791 {
792 	u32 val, reg, idx, dqs_wr_idx = 0, crc = 0;
793 	u32 *sdram_offset = (u32 *)RESUME_TRAINING_VALUES_ADDR;
794 	u32 training_val[RESUME_TRAINING_VALUES_MAX] = { 0 };
795 	u32 regs = *((u32 *)NUM_OF_REGISTER_ADDR);
796 
797 	/*
798 	 * Read Training results & Dunit registers from memory and write
799 	 * it to an array
800 	 */
801 	for (idx = 0; idx < regs; idx++) {
802 		training_val[idx] = *sdram_offset;
803 		crc += *sdram_offset;
804 		sdram_offset++;
805 	}
806 
807 	sdram_offset = (u32 *)CHECKSUM_RESULT_ADDR;
808 
809 	if ((*sdram_offset) == crc) {
810 		DEBUG_SUSPEND_RESUME_S("Training Results CheckSum read PASS= ");
811 		DEBUG_SUSPEND_RESUME_D(crc, 8);
812 		DEBUG_SUSPEND_RESUME_S("\n");
813 	} else {
814 		DEBUG_MAIN_S("Wrong Training Results CheckSum\n");
815 		return MV_FAIL;
816 	}
817 
818 	/*
819 	 * We iterate through all the registers except for the last 2 since
820 	 * they are Dunit registers (and not PHY registers)
821 	 */
822 	for (idx = 0; idx < (regs - 2); idx++) {
823 		val = training_val[idx];
824 		reg = (val >> REG_PHY_CS_OFFS) & 0x3F; /*read the phy address */
825 
826 		/* Check if the values belongs to the DQS WR */
827 		if (reg == PUP_WL_MODE) {
828 			/* bit[5:0] in DQS_WR are delay */
829 			val = (training_val[dqs_wr_idx++] & 0x3F);
830 			/*
831 			 * bit[15:10] are DQS_WR delay & bit[9:0] are
832 			 * WL phase & delay
833 			 */
834 			val = (val << REG_PHY_DQS_REF_DLY_OFFS) |
835 				(training_val[idx] & 0x3C003FF);
836 			/* Add Request pending and write operation bits */
837 			val |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR;
838 		} else if (reg == PUP_DQS_WR) {
839 			/*
840 			 * Do nothing since DQS_WR will be done in PUP_WL_MODE
841 			 */
842 			continue;
843 		}
844 
845 		val |= REG_PHY_REGISTRY_FILE_ACCESS_OP_WR;
846 		reg_write(REG_PHY_REGISTRY_FILE_ACCESS_ADDR, val);
847 		do {
848 			val = (reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR)) &
849 				REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE;
850 		} while (val);	/* Wait for '0' to mark the end of the transaction */
851 	}
852 
853 	/* write last 2 Dunit configurations */
854 	val = training_val[idx];
855 	reg_write(REG_READ_DATA_SAMPLE_DELAYS_ADDR, val);	/* reg 0x1538 */
856 	val = training_val[idx + 1];
857 	reg_write(REG_READ_DATA_READY_DELAYS_ADDR, val);	/* reg 0x153c */
858 
859 	return MV_OK;
860 }
861 
862 /*
863  * Name:     ddr3_check_if_resume_mode()
864  * Desc:     Reads the address (0x3000) of the Resume Magic word (0xDEADB002)
865  * Args:     MV_DRAM_INFO *dram_info
866  * Notes:
867  * Returns:  return (magic_word == SUSPEND_MAGIC_WORD)
868  */
ddr3_check_if_resume_mode(MV_DRAM_INFO * dram_info,u32 freq)869 int ddr3_check_if_resume_mode(MV_DRAM_INFO *dram_info, u32 freq)
870 {
871 	u32 magic_word;
872 	u32 *sdram_offset = (u32 *)BOOT_INFO_ADDR;
873 
874 	if (dram_info->reg_dimm != 1) {
875 		/*
876 		 * Perform write levleling in order initiate the phy with
877 		 * low frequency
878 		 */
879 		if (MV_OK != ddr3_write_leveling_hw(freq, dram_info)) {
880 			DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Write Leveling Hw)\n");
881 			return MV_DDR3_TRAINING_ERR_WR_LVL_HW;
882 		}
883 	}
884 
885 	if (MV_OK != ddr3_load_patterns(dram_info, 1)) {
886 		DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Loading Patterns)\n");
887 		return MV_DDR3_TRAINING_ERR_LOAD_PATTERNS;
888 	}
889 
890 	/* Enable CS0 only for RL */
891 	dram_info->cs_ena = 0x1;
892 
893 	/* Perform Read levleling in order to get stable memory */
894 	if (MV_OK != ddr3_read_leveling_hw(freq, dram_info)) {
895 		DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Read Leveling Hw)\n");
896 		return MV_DDR3_TRAINING_ERR_WR_LVL_HW;
897 	}
898 
899 	/* Back to relevant CS */
900 	dram_info->cs_ena = ddr3_get_cs_ena_from_reg();
901 
902 	magic_word = *sdram_offset;
903 	return magic_word == SUSPEND_MAGIC_WORD;
904 }
905 
906 /*
907  * Name:     ddr3_training_suspend_resume()
908  * Desc:     Execute the Resume state
909  * Args:     MV_DRAM_INFO *dram_info
910  * Notes:
911  * Returns:  return (magic_word == SUSPEND_MAGIC_WORD)
912  */
ddr3_training_suspend_resume(MV_DRAM_INFO * dram_info)913 int ddr3_training_suspend_resume(MV_DRAM_INFO *dram_info)
914 {
915 	u32 freq, reg;
916 	int tmp_ratio;
917 
918 	/* Configure DDR */
919 	if (MV_OK != ddr3_read_training_results())
920 		return MV_FAIL;
921 
922 	/* Reset read FIFO */
923 	reg = reg_read(REG_DRAM_TRAINING_ADDR);
924 
925 	/* Start Auto Read Leveling procedure */
926 	reg |= (1 << REG_DRAM_TRAINING_RL_OFFS);
927 	reg_write(REG_DRAM_TRAINING_ADDR, reg);	/* 0x15B0 - Training Register */
928 
929 	reg = reg_read(REG_DRAM_TRAINING_2_ADDR);
930 	reg |= ((1 << REG_DRAM_TRAINING_2_FIFO_RST_OFFS) +
931 		(1 << REG_DRAM_TRAINING_2_SW_OVRD_OFFS));
932 
933 	/* [0] = 1 - Enable SW override, [4] = 1 - FIFO reset  */
934 	/* 0x15B8 - Training SW 2 Register */
935 	reg_write(REG_DRAM_TRAINING_2_ADDR, reg);
936 
937 	udelay(2);
938 
939 	reg = reg_read(REG_DRAM_TRAINING_ADDR);
940 	/* Clear Auto Read Leveling procedure */
941 	reg &= ~(1 << REG_DRAM_TRAINING_RL_OFFS);
942 	reg_write(REG_DRAM_TRAINING_ADDR, reg);	/* 0x15B0 - Training Register */
943 
944 	/* Return to target frequency */
945 	freq = dram_info->target_frequency;
946 	tmp_ratio = 1;
947 	if (MV_OK != ddr3_dfs_low_2_high(freq, tmp_ratio, dram_info)) {
948 		DEBUG_MAIN_S("DDR3 Training Sequence - FAILED (Dfs Low2High)\n");
949 		return MV_DDR3_TRAINING_ERR_DFS_H2L;
950 	}
951 
952 	if (dram_info->ecc_ena) {
953 		/* Scabbling the RL area pattern and the training area */
954 		mv_sys_xor_finish();
955 		dram_info->num_cs = 1;
956 		dram_info->cs_ena = 1;
957 		mv_sys_xor_init(dram_info);
958 		mv_xor_mem_init(0, RESUME_RL_PATTERNS_ADDR,
959 				RESUME_RL_PATTERNS_SIZE, 0xFFFFFFFF, 0xFFFFFFFF);
960 
961 		/* Wait for previous transfer completion */
962 
963 		while (mv_xor_state_get(0) != MV_IDLE)
964 			;
965 
966 		/* Return XOR State */
967 		mv_sys_xor_finish();
968 	}
969 
970 	return MV_OK;
971 }
972 #endif
973 
ddr3_print_freq(u32 freq)974 void ddr3_print_freq(u32 freq)
975 {
976 	u32 tmp_freq;
977 
978 	switch (freq) {
979 	case 0:
980 		tmp_freq = 100;
981 		break;
982 	case 1:
983 		tmp_freq = 300;
984 		break;
985 	case 2:
986 		tmp_freq = 360;
987 		break;
988 	case 3:
989 		tmp_freq = 400;
990 		break;
991 	case 4:
992 		tmp_freq = 444;
993 		break;
994 	case 5:
995 		tmp_freq = 500;
996 		break;
997 	case 6:
998 		tmp_freq = 533;
999 		break;
1000 	case 7:
1001 		tmp_freq = 600;
1002 		break;
1003 	case 8:
1004 		tmp_freq = 666;
1005 		break;
1006 	case 9:
1007 		tmp_freq = 720;
1008 		break;
1009 	case 10:
1010 		tmp_freq = 800;
1011 		break;
1012 	default:
1013 		tmp_freq = 100;
1014 	}
1015 
1016 	printf("Current frequency is: %dMHz\n", tmp_freq);
1017 }
1018 
ddr3_get_min_max_read_sample_delay(u32 cs_enable,u32 reg,u32 * min,u32 * max,u32 * cs_max)1019 int ddr3_get_min_max_read_sample_delay(u32 cs_enable, u32 reg, u32 *min,
1020 				       u32 *max, u32 *cs_max)
1021 {
1022 	u32 cs, delay;
1023 
1024 	*min = 0xFFFFFFFF;
1025 	*max = 0x0;
1026 
1027 	for (cs = 0; cs < MAX_CS; cs++) {
1028 		if ((cs_enable & (1 << cs)) == 0)
1029 			continue;
1030 
1031 		delay = ((reg >> (cs * 8)) & 0x1F);
1032 
1033 		if (delay < *min)
1034 			*min = delay;
1035 
1036 		if (delay > *max) {
1037 			*max = delay;
1038 			*cs_max = cs;
1039 		}
1040 	}
1041 
1042 	return MV_OK;
1043 }
1044 
ddr3_get_min_max_rl_phase(MV_DRAM_INFO * dram_info,u32 * min,u32 * max,u32 cs)1045 int ddr3_get_min_max_rl_phase(MV_DRAM_INFO *dram_info, u32 *min, u32 *max,
1046 			      u32 cs)
1047 {
1048 	u32 pup, reg, phase;
1049 
1050 	*min = 0xFFFFFFFF;
1051 	*max = 0x0;
1052 
1053 	for (pup = 0; pup < dram_info->num_of_total_pups; pup++) {
1054 		reg = ddr3_read_pup_reg(PUP_RL_MODE, cs, pup);
1055 		phase = ((reg >> 8) & 0x7);
1056 
1057 		if (phase < *min)
1058 			*min = phase;
1059 
1060 		if (phase > *max)
1061 			*max = phase;
1062 	}
1063 
1064 	return MV_OK;
1065 }
1066 
ddr3_odt_activate(int activate)1067 int ddr3_odt_activate(int activate)
1068 {
1069 	u32 reg, mask;
1070 
1071 	mask = (1 << REG_DUNIT_ODT_CTRL_OVRD_OFFS) |
1072 		(1 << REG_DUNIT_ODT_CTRL_OVRD_VAL_OFFS);
1073 	/* {0x0000149C}  -   DDR Dunit ODT Control Register */
1074 	reg = reg_read(REG_DUNIT_ODT_CTRL_ADDR);
1075 	if (activate)
1076 		reg |= mask;
1077 	else
1078 		reg &= ~mask;
1079 
1080 	reg_write(REG_DUNIT_ODT_CTRL_ADDR, reg);
1081 
1082 	return MV_OK;
1083 }
1084 
ddr3_odt_read_dynamic_config(MV_DRAM_INFO * dram_info)1085 int ddr3_odt_read_dynamic_config(MV_DRAM_INFO *dram_info)
1086 {
1087 	u32 min_read_sample_delay, max_read_sample_delay, max_rl_phase;
1088 	u32 min, max, cs_max;
1089 	u32 cs_ena, reg;
1090 
1091 	reg = reg_read(REG_READ_DATA_SAMPLE_DELAYS_ADDR);
1092 	cs_ena = ddr3_get_cs_ena_from_reg();
1093 
1094 	/* Get minimum and maximum of read sample delay of all CS */
1095 	ddr3_get_min_max_read_sample_delay(cs_ena, reg, &min_read_sample_delay,
1096 					   &max_read_sample_delay, &cs_max);
1097 
1098 	/*
1099 	 * Get minimum and maximum read leveling phase which belongs to the
1100 	 * maximal read sample delay
1101 	 */
1102 	ddr3_get_min_max_rl_phase(dram_info, &min, &max, cs_max);
1103 	max_rl_phase = max;
1104 
1105 	/* DDR ODT Timing (Low) Register calculation */
1106 	reg = reg_read(REG_ODT_TIME_LOW_ADDR);
1107 	reg &= ~(0x1FF << REG_ODT_ON_CTL_RD_OFFS);
1108 	reg |= (((min_read_sample_delay - 1) & 0xF) << REG_ODT_ON_CTL_RD_OFFS);
1109 	reg |= (((max_read_sample_delay + 4 + (((max_rl_phase + 1) / 2) + 1)) &
1110 		 0x1F) << REG_ODT_OFF_CTL_RD_OFFS);
1111 	reg_write(REG_ODT_TIME_LOW_ADDR, reg);
1112 
1113 	return MV_OK;
1114 }
1115