1 // © 2016 and later: Unicode, Inc. and others.
2 // License & terms of use: http://www.unicode.org/copyright.html
3 /*
4 **********************************************************************
5 * Copyright (c) 2003-2013, International Business Machines
6 * Corporation and others. All Rights Reserved.
7 **********************************************************************
8 * Author: Alan Liu
9 * Created: July 21 2003
10 * Since: ICU 2.8
11 **********************************************************************
12 */
13 #ifndef OLSONTZ_H
14 #define OLSONTZ_H
15
16 #include "unicode/utypes.h"
17
18 #if !UCONFIG_NO_FORMATTING
19
20 #include "unicode/basictz.h"
21 #include "umutex.h"
22
23 struct UResourceBundle;
24
25 U_NAMESPACE_BEGIN
26
27 class SimpleTimeZone;
28
29 /**
30 * A time zone based on the Olson tz database. Olson time zones change
31 * behavior over time. The raw offset, rules, presence or absence of
32 * daylight savings time, and even the daylight savings amount can all
33 * vary.
34 *
35 * This class uses a resource bundle named "zoneinfo". Zoneinfo is a
36 * table containing different kinds of resources. In several places,
37 * zones are referred to using integers. A zone's integer is a number
38 * from 0..n-1, where n is the number of zones, with the zones sorted
39 * in lexicographic order.
40 *
41 * 1. Zones. These have keys corresponding to the Olson IDs, e.g.,
42 * "Asia/Shanghai". Each resource describes the behavior of the given
43 * zone. Zones come in two different formats.
44 *
45 * a. Zone (table). A zone is a table resource contains several
46 * type of resources below:
47 *
48 * - typeOffsets:intvector (Required)
49 *
50 * Sets of UTC raw/dst offset pairs in seconds. Entries at
51 * 2n represents raw offset and 2n+1 represents dst offset
52 * paired with the raw offset at 2n. The very first pair represents
53 * the initial zone offset (before the first transition) always.
54 *
55 * - trans:intvector (Optional)
56 *
57 * List of transition times represented by 32bit seconds from the
58 * epoch (1970-01-01T00:00Z) in ascending order.
59 *
60 * - transPre32/transPost32:intvector (Optional)
61 *
62 * List of transition times before/after 32bit minimum seconds.
63 * Each time is represented by a pair of 32bit integer.
64 *
65 * - typeMap:bin (Optional)
66 *
67 * Array of bytes representing the mapping between each transition
68 * time (transPre32/trans/transPost32) and its corresponding offset
69 * data (typeOffsets).
70 *
71 * - finalRule:string (Optional)
72 *
73 * If a recurrent transition rule is applicable to a zone forever
74 * after the final transition time, finalRule represents the rule
75 * in Rules data.
76 *
77 * - finalRaw:int (Optional)
78 *
79 * When finalRule is available, finalRaw is required and specifies
80 * the raw (base) offset of the rule.
81 *
82 * - finalYear:int (Optional)
83 *
84 * When finalRule is available, finalYear is required and specifies
85 * the start year of the rule.
86 *
87 * - links:intvector (Optional)
88 *
89 * When this zone data is shared with other zones, links specifies
90 * all zones including the zone itself. Each zone is referenced by
91 * integer index.
92 *
93 * b. Link (int, length 1). A link zone is an int resource. The
94 * integer is the zone number of the target zone. The key of this
95 * resource is an alternate name for the target zone. This data
96 * is corresponding to Link data in the tz database.
97 *
98 *
99 * 2. Rules. These have keys corresponding to the Olson rule IDs,
100 * with an underscore prepended, e.g., "_EU". Each resource describes
101 * the behavior of the given rule using an intvector, containing the
102 * onset list, the cessation list, and the DST savings. The onset and
103 * cessation lists consist of the month, dowim, dow, time, and time
104 * mode. The end result is that the 11 integers describing the rule
105 * can be passed directly into the SimpleTimeZone 13-argument
106 * constructor (the other two arguments will be the raw offset, taken
107 * from the complex zone element 5, and the ID string, which is not
108 * used), with the times and the DST savings multiplied by 1000 to
109 * scale from seconds to milliseconds.
110 *
111 * 3. Regions. An array specifies mapping between zones and regions.
112 * Each item is either a 2-letter ISO country code or "001"
113 * (UN M.49 - World). This data is generated from "zone.tab"
114 * in the tz database.
115 */
116 class U_I18N_API OlsonTimeZone: public BasicTimeZone {
117 public:
118 /**
119 * Construct from a resource bundle.
120 * @param top the top-level zoneinfo resource bundle. This is used
121 * to lookup the rule that `res' may refer to, if there is one.
122 * @param res the resource bundle of the zone to be constructed
123 * @param tzid the time zone ID
124 * @param ec input-output error code
125 */
126 OlsonTimeZone(const UResourceBundle* top,
127 const UResourceBundle* res,
128 const UnicodeString& tzid,
129 UErrorCode& ec);
130
131 /**
132 * Copy constructor
133 */
134 OlsonTimeZone(const OlsonTimeZone& other);
135
136 /**
137 * Destructor
138 */
139 virtual ~OlsonTimeZone();
140
141 /**
142 * Assignment operator
143 */
144 OlsonTimeZone& operator=(const OlsonTimeZone& other);
145
146 /**
147 * Returns true if the two TimeZone objects are equal.
148 */
149 virtual UBool operator==(const TimeZone& other) const;
150
151 /**
152 * TimeZone API.
153 */
154 virtual TimeZone* clone() const;
155
156 /**
157 * TimeZone API.
158 */
159 static UClassID U_EXPORT2 getStaticClassID();
160
161 /**
162 * TimeZone API.
163 */
164 virtual UClassID getDynamicClassID() const;
165
166 /**
167 * TimeZone API. Do not call this; prefer getOffset(UDate,...).
168 */
169 virtual int32_t getOffset(uint8_t era, int32_t year, int32_t month,
170 int32_t day, uint8_t dayOfWeek,
171 int32_t millis, UErrorCode& ec) const;
172
173 /**
174 * TimeZone API. Do not call this; prefer getOffset(UDate,...).
175 */
176 virtual int32_t getOffset(uint8_t era, int32_t year, int32_t month,
177 int32_t day, uint8_t dayOfWeek,
178 int32_t millis, int32_t monthLength,
179 UErrorCode& ec) const;
180
181 /**
182 * TimeZone API.
183 */
184 virtual void getOffset(UDate date, UBool local, int32_t& rawOffset,
185 int32_t& dstOffset, UErrorCode& ec) const;
186
187 /**
188 * BasicTimeZone API.
189 */
190 virtual void getOffsetFromLocal(UDate date, int32_t nonExistingTimeOpt, int32_t duplicatedTimeOpt,
191 int32_t& rawoff, int32_t& dstoff, UErrorCode& ec) const;
192
193 /**
194 * TimeZone API. This method has no effect since objects of this
195 * class are quasi-immutable (the base class allows the ID to be
196 * changed).
197 */
198 virtual void setRawOffset(int32_t offsetMillis);
199
200 /**
201 * TimeZone API. For a historical zone, the raw offset can change
202 * over time, so this API is not useful. In order to approximate
203 * expected behavior, this method returns the raw offset for the
204 * current moment in time.
205 */
206 virtual int32_t getRawOffset() const;
207
208 /**
209 * TimeZone API. For a historical zone, whether DST is used or
210 * not varies over time. In order to approximate expected
211 * behavior, this method returns TRUE if DST is observed at any
212 * point in the current year.
213 */
214 virtual UBool useDaylightTime() const;
215
216 /**
217 * TimeZone API.
218 */
219 virtual UBool inDaylightTime(UDate date, UErrorCode& ec) const;
220
221 /**
222 * TimeZone API.
223 */
224 virtual int32_t getDSTSavings() const;
225
226 /**
227 * TimeZone API. Also comare historic transitions.
228 */
229 virtual UBool hasSameRules(const TimeZone& other) const;
230
231 /**
232 * BasicTimeZone API.
233 * Gets the first time zone transition after the base time.
234 * @param base The base time.
235 * @param inclusive Whether the base time is inclusive or not.
236 * @param result Receives the first transition after the base time.
237 * @return TRUE if the transition is found.
238 */
239 virtual UBool getNextTransition(UDate base, UBool inclusive, TimeZoneTransition& result) const;
240
241 /**
242 * BasicTimeZone API.
243 * Gets the most recent time zone transition before the base time.
244 * @param base The base time.
245 * @param inclusive Whether the base time is inclusive or not.
246 * @param result Receives the most recent transition before the base time.
247 * @return TRUE if the transition is found.
248 */
249 virtual UBool getPreviousTransition(UDate base, UBool inclusive, TimeZoneTransition& result) const;
250
251 /**
252 * BasicTimeZone API.
253 * Returns the number of <code>TimeZoneRule</code>s which represents time transitions,
254 * for this time zone, that is, all <code>TimeZoneRule</code>s for this time zone except
255 * <code>InitialTimeZoneRule</code>. The return value range is 0 or any positive value.
256 * @param status Receives error status code.
257 * @return The number of <code>TimeZoneRule</code>s representing time transitions.
258 */
259 virtual int32_t countTransitionRules(UErrorCode& status) const;
260
261 /**
262 * Gets the <code>InitialTimeZoneRule</code> and the set of <code>TimeZoneRule</code>
263 * which represent time transitions for this time zone. On successful return,
264 * the argument initial points to non-NULL <code>InitialTimeZoneRule</code> and
265 * the array trsrules is filled with 0 or multiple <code>TimeZoneRule</code>
266 * instances up to the size specified by trscount. The results are referencing the
267 * rule instance held by this time zone instance. Therefore, after this time zone
268 * is destructed, they are no longer available.
269 * @param initial Receives the initial timezone rule
270 * @param trsrules Receives the timezone transition rules
271 * @param trscount On input, specify the size of the array 'transitions' receiving
272 * the timezone transition rules. On output, actual number of
273 * rules filled in the array will be set.
274 * @param status Receives error status code.
275 */
276 virtual void getTimeZoneRules(const InitialTimeZoneRule*& initial,
277 const TimeZoneRule* trsrules[], int32_t& trscount, UErrorCode& status) const;
278
279 /**
280 * Internal API returning the canonical ID of this zone.
281 * This ID won't be affected by setID().
282 */
283 const UChar *getCanonicalID() const;
284
285 private:
286 /**
287 * Default constructor. Creates a time zone with an empty ID and
288 * a fixed GMT offset of zero.
289 */
290 OlsonTimeZone();
291
292 private:
293
294 void constructEmpty();
295
296 void getHistoricalOffset(UDate date, UBool local,
297 int32_t NonExistingTimeOpt, int32_t DuplicatedTimeOpt,
298 int32_t& rawoff, int32_t& dstoff) const;
299
300 int16_t transitionCount() const;
301
302 int64_t transitionTimeInSeconds(int16_t transIdx) const;
303 double transitionTime(int16_t transIdx) const;
304
305 /*
306 * Following 3 methods return an offset at the given transition time index.
307 * When the index is negative, return the initial offset.
308 */
309 int32_t zoneOffsetAt(int16_t transIdx) const;
310 int32_t rawOffsetAt(int16_t transIdx) const;
311 int32_t dstOffsetAt(int16_t transIdx) const;
312
313 /*
314 * Following methods return the initial offset.
315 */
316 int32_t initialRawOffset() const;
317 int32_t initialDstOffset() const;
318
319 /**
320 * Number of transitions in each time range
321 */
322 int16_t transitionCountPre32;
323 int16_t transitionCount32;
324 int16_t transitionCountPost32;
325
326 /**
327 * Time of each transition in seconds from 1970 epoch before 32bit second range (<= 1900).
328 * Each transition in this range is represented by a pair of int32_t.
329 * Length is transitionCount int32_t's. NULL if no transitions in this range.
330 */
331 const int32_t *transitionTimesPre32; // alias into res; do not delete
332
333 /**
334 * Time of each transition in seconds from 1970 epoch in 32bit second range.
335 * Length is transitionCount int32_t's. NULL if no transitions in this range.
336 */
337 const int32_t *transitionTimes32; // alias into res; do not delete
338
339 /**
340 * Time of each transition in seconds from 1970 epoch after 32bit second range (>= 2038).
341 * Each transition in this range is represented by a pair of int32_t.
342 * Length is transitionCount int32_t's. NULL if no transitions in this range.
343 */
344 const int32_t *transitionTimesPost32; // alias into res; do not delete
345
346 /**
347 * Number of types, 1..255
348 */
349 int16_t typeCount;
350
351 /**
352 * Offset from GMT in seconds for each type.
353 * Length is typeCount int32_t's. At least one type (a pair of int32_t)
354 * is required.
355 */
356 const int32_t *typeOffsets; // alias into res; do not delete
357
358 /**
359 * Type description data, consisting of transitionCount uint8_t
360 * type indices (from 0..typeCount-1).
361 * Length is transitionCount int16_t's. NULL if no transitions.
362 */
363 const uint8_t *typeMapData; // alias into res; do not delete
364
365 /**
366 * A SimpleTimeZone that governs the behavior for date >= finalMillis.
367 */
368 SimpleTimeZone *finalZone; // owned, may be NULL
369
370 /**
371 * For date >= finalMillis, the finalZone will be used.
372 */
373 double finalStartMillis;
374
375 /**
376 * For year >= finalYear, the finalZone will be used.
377 */
378 int32_t finalStartYear;
379
380 /*
381 * Canonical (CLDR) ID of this zone
382 */
383 const UChar *canonicalID;
384
385 /* BasicTimeZone support */
386 void clearTransitionRules(void);
387 void deleteTransitionRules(void);
388 void checkTransitionRules(UErrorCode& status) const;
389
390 public: // Internal, for access from plain C code
391 void initTransitionRules(UErrorCode& status);
392 private:
393
394 InitialTimeZoneRule *initialRule;
395 TimeZoneTransition *firstTZTransition;
396 int16_t firstTZTransitionIdx;
397 TimeZoneTransition *firstFinalTZTransition;
398 TimeArrayTimeZoneRule **historicRules;
399 int16_t historicRuleCount;
400 SimpleTimeZone *finalZoneWithStartYear; // hack
401 UInitOnce transitionRulesInitOnce;
402 };
403
404 inline int16_t
transitionCount()405 OlsonTimeZone::transitionCount() const {
406 return transitionCountPre32 + transitionCount32 + transitionCountPost32;
407 }
408
409 inline double
transitionTime(int16_t transIdx)410 OlsonTimeZone::transitionTime(int16_t transIdx) const {
411 return (double)transitionTimeInSeconds(transIdx) * U_MILLIS_PER_SECOND;
412 }
413
414 inline int32_t
zoneOffsetAt(int16_t transIdx)415 OlsonTimeZone::zoneOffsetAt(int16_t transIdx) const {
416 int16_t typeIdx = (transIdx >= 0 ? typeMapData[transIdx] : 0) << 1;
417 return typeOffsets[typeIdx] + typeOffsets[typeIdx + 1];
418 }
419
420 inline int32_t
rawOffsetAt(int16_t transIdx)421 OlsonTimeZone::rawOffsetAt(int16_t transIdx) const {
422 int16_t typeIdx = (transIdx >= 0 ? typeMapData[transIdx] : 0) << 1;
423 return typeOffsets[typeIdx];
424 }
425
426 inline int32_t
dstOffsetAt(int16_t transIdx)427 OlsonTimeZone::dstOffsetAt(int16_t transIdx) const {
428 int16_t typeIdx = (transIdx >= 0 ? typeMapData[transIdx] : 0) << 1;
429 return typeOffsets[typeIdx + 1];
430 }
431
432 inline int32_t
initialRawOffset()433 OlsonTimeZone::initialRawOffset() const {
434 return typeOffsets[0];
435 }
436
437 inline int32_t
initialDstOffset()438 OlsonTimeZone::initialDstOffset() const {
439 return typeOffsets[1];
440 }
441
442 inline const UChar*
getCanonicalID()443 OlsonTimeZone::getCanonicalID() const {
444 return canonicalID;
445 }
446
447
448 U_NAMESPACE_END
449
450 #endif // !UCONFIG_NO_FORMATTING
451 #endif // OLSONTZ_H
452
453 //eof
454