1 /**************************************************************************** 2 * 3 * ttobjs.h 4 * 5 * Objects manager (specification). 6 * 7 * Copyright 1996-2018 by 8 * David Turner, Robert Wilhelm, and Werner Lemberg. 9 * 10 * This file is part of the FreeType project, and may only be used, 11 * modified, and distributed under the terms of the FreeType project 12 * license, LICENSE.TXT. By continuing to use, modify, or distribute 13 * this file you indicate that you have read the license and 14 * understand and accept it fully. 15 * 16 */ 17 18 19 #ifndef TTOBJS_H_ 20 #define TTOBJS_H_ 21 22 23 #include <ft2build.h> 24 #include FT_INTERNAL_OBJECTS_H 25 #include FT_INTERNAL_TRUETYPE_TYPES_H 26 27 28 FT_BEGIN_HEADER 29 30 31 /************************************************************************** 32 * 33 * @Type: 34 * TT_Driver 35 * 36 * @Description: 37 * A handle to a TrueType driver object. 38 */ 39 typedef struct TT_DriverRec_* TT_Driver; 40 41 42 /************************************************************************** 43 * 44 * @Type: 45 * TT_GlyphSlot 46 * 47 * @Description: 48 * A handle to a TrueType glyph slot object. 49 * 50 * @Note: 51 * This is a direct typedef of FT_GlyphSlot, as there is nothing 52 * specific about the TrueType glyph slot. 53 */ 54 typedef FT_GlyphSlot TT_GlyphSlot; 55 56 57 /************************************************************************** 58 * 59 * @Struct: 60 * TT_GraphicsState 61 * 62 * @Description: 63 * The TrueType graphics state used during bytecode interpretation. 64 */ 65 typedef struct TT_GraphicsState_ 66 { 67 FT_UShort rp0; 68 FT_UShort rp1; 69 FT_UShort rp2; 70 71 FT_UnitVector dualVector; 72 FT_UnitVector projVector; 73 FT_UnitVector freeVector; 74 75 FT_Long loop; 76 FT_F26Dot6 minimum_distance; 77 FT_Int round_state; 78 79 FT_Bool auto_flip; 80 FT_F26Dot6 control_value_cutin; 81 FT_F26Dot6 single_width_cutin; 82 FT_F26Dot6 single_width_value; 83 FT_UShort delta_base; 84 FT_UShort delta_shift; 85 86 FT_Byte instruct_control; 87 /* According to Greg Hitchcock from Microsoft, the `scan_control' */ 88 /* variable as documented in the TrueType specification is a 32-bit */ 89 /* integer; the high-word part holds the SCANTYPE value, the low-word */ 90 /* part the SCANCTRL value. We separate it into two fields. */ 91 FT_Bool scan_control; 92 FT_Int scan_type; 93 94 FT_UShort gep0; 95 FT_UShort gep1; 96 FT_UShort gep2; 97 98 } TT_GraphicsState; 99 100 101 #ifdef TT_USE_BYTECODE_INTERPRETER 102 103 FT_LOCAL( void ) 104 tt_glyphzone_done( TT_GlyphZone zone ); 105 106 FT_LOCAL( FT_Error ) 107 tt_glyphzone_new( FT_Memory memory, 108 FT_UShort maxPoints, 109 FT_Short maxContours, 110 TT_GlyphZone zone ); 111 112 #endif /* TT_USE_BYTECODE_INTERPRETER */ 113 114 115 116 /************************************************************************** 117 * 118 * EXECUTION SUBTABLES 119 * 120 * These sub-tables relate to instruction execution. 121 * 122 */ 123 124 125 #define TT_MAX_CODE_RANGES 3 126 127 128 /************************************************************************** 129 * 130 * There can only be 3 active code ranges at once: 131 * - the Font Program 132 * - the CVT Program 133 * - a glyph's instructions set 134 */ 135 typedef enum TT_CodeRange_Tag_ 136 { 137 tt_coderange_none = 0, 138 tt_coderange_font, 139 tt_coderange_cvt, 140 tt_coderange_glyph 141 142 } TT_CodeRange_Tag; 143 144 145 typedef struct TT_CodeRange_ 146 { 147 FT_Byte* base; 148 FT_Long size; 149 150 } TT_CodeRange; 151 152 typedef TT_CodeRange TT_CodeRangeTable[TT_MAX_CODE_RANGES]; 153 154 155 /************************************************************************** 156 * 157 * Defines a function/instruction definition record. 158 */ 159 typedef struct TT_DefRecord_ 160 { 161 FT_Int range; /* in which code range is it located? */ 162 FT_Long start; /* where does it start? */ 163 FT_Long end; /* where does it end? */ 164 FT_UInt opc; /* function #, or instruction code */ 165 FT_Bool active; /* is it active? */ 166 FT_Bool inline_delta; /* is function that defines inline delta? */ 167 FT_ULong sph_fdef_flags; /* flags to identify special functions */ 168 169 } TT_DefRecord, *TT_DefArray; 170 171 172 /************************************************************************** 173 * 174 * Subglyph transformation record. 175 */ 176 typedef struct TT_Transform_ 177 { 178 FT_Fixed xx, xy; /* transformation matrix coefficients */ 179 FT_Fixed yx, yy; 180 FT_F26Dot6 ox, oy; /* offsets */ 181 182 } TT_Transform; 183 184 185 /************************************************************************** 186 * 187 * A note regarding non-squared pixels: 188 * 189 * (This text will probably go into some docs at some time; for now, it 190 * is kept here to explain some definitions in the TT_Size_Metrics 191 * record). 192 * 193 * The CVT is a one-dimensional array containing values that control 194 * certain important characteristics in a font, like the height of all 195 * capitals, all lowercase letter, default spacing or stem width/height. 196 * 197 * These values are found in FUnits in the font file, and must be scaled 198 * to pixel coordinates before being used by the CVT and glyph programs. 199 * Unfortunately, when using distinct x and y resolutions (or distinct x 200 * and y pointsizes), there are two possible scalings. 201 * 202 * A first try was to implement a `lazy' scheme where all values were 203 * scaled when first used. However, while some values are always used 204 * in the same direction, some others are used under many different 205 * circumstances and orientations. 206 * 207 * I have found a simpler way to do the same, and it even seems to work 208 * in most of the cases: 209 * 210 * - All CVT values are scaled to the maximum ppem size. 211 * 212 * - When performing a read or write in the CVT, a ratio factor is used 213 * to perform adequate scaling. Example: 214 * 215 * x_ppem = 14 216 * y_ppem = 10 217 * 218 * We choose ppem = x_ppem = 14 as the CVT scaling size. All cvt 219 * entries are scaled to it. 220 * 221 * x_ratio = 1.0 222 * y_ratio = y_ppem/ppem (< 1.0) 223 * 224 * We compute the current ratio like: 225 * 226 * - If projVector is horizontal, 227 * ratio = x_ratio = 1.0 228 * 229 * - if projVector is vertical, 230 * ratio = y_ratio 231 * 232 * - else, 233 * ratio = sqrt( (proj.x * x_ratio) ^ 2 + (proj.y * y_ratio) ^ 2 ) 234 * 235 * Reading a cvt value returns 236 * ratio * cvt[index] 237 * 238 * Writing a cvt value in pixels: 239 * cvt[index] / ratio 240 * 241 * The current ppem is simply 242 * ratio * ppem 243 * 244 */ 245 246 247 /************************************************************************** 248 * 249 * Metrics used by the TrueType size and context objects. 250 */ 251 typedef struct TT_Size_Metrics_ 252 { 253 /* for non-square pixels */ 254 FT_Long x_ratio; 255 FT_Long y_ratio; 256 257 FT_UShort ppem; /* maximum ppem size */ 258 FT_Long ratio; /* current ratio */ 259 FT_Fixed scale; 260 261 FT_F26Dot6 compensations[4]; /* device-specific compensations */ 262 263 FT_Bool valid; 264 265 FT_Bool rotated; /* `is the glyph rotated?'-flag */ 266 FT_Bool stretched; /* `is the glyph stretched?'-flag */ 267 268 } TT_Size_Metrics; 269 270 271 /************************************************************************** 272 * 273 * TrueType size class. 274 */ 275 typedef struct TT_SizeRec_ 276 { 277 FT_SizeRec root; 278 279 /* we have our own copy of metrics so that we can modify */ 280 /* it without affecting auto-hinting (when used) */ 281 FT_Size_Metrics* metrics; /* for the current rendering mode */ 282 FT_Size_Metrics hinted_metrics; /* for the hinted rendering mode */ 283 284 TT_Size_Metrics ttmetrics; 285 286 FT_ULong strike_index; /* 0xFFFFFFFF to indicate invalid */ 287 288 #ifdef TT_USE_BYTECODE_INTERPRETER 289 290 FT_Long point_size; /* for the `MPS' bytecode instruction */ 291 292 FT_UInt num_function_defs; /* number of function definitions */ 293 FT_UInt max_function_defs; 294 TT_DefArray function_defs; /* table of function definitions */ 295 296 FT_UInt num_instruction_defs; /* number of ins. definitions */ 297 FT_UInt max_instruction_defs; 298 TT_DefArray instruction_defs; /* table of ins. definitions */ 299 300 FT_UInt max_func; 301 FT_UInt max_ins; 302 303 TT_CodeRangeTable codeRangeTable; 304 305 TT_GraphicsState GS; 306 307 FT_ULong cvt_size; /* the scaled control value table */ 308 FT_Long* cvt; 309 310 FT_UShort storage_size; /* The storage area is now part of */ 311 FT_Long* storage; /* the instance */ 312 313 TT_GlyphZoneRec twilight; /* The instance's twilight zone */ 314 315 TT_ExecContext context; 316 317 /* if negative, `fpgm' (resp. `prep'), wasn't executed yet; */ 318 /* otherwise it is the returned error code */ 319 FT_Error bytecode_ready; 320 FT_Error cvt_ready; 321 322 #endif /* TT_USE_BYTECODE_INTERPRETER */ 323 324 } TT_SizeRec; 325 326 327 /************************************************************************** 328 * 329 * TrueType driver class. 330 */ 331 typedef struct TT_DriverRec_ 332 { 333 FT_DriverRec root; 334 335 TT_GlyphZoneRec zone; /* glyph loader points zone */ 336 337 FT_UInt interpreter_version; 338 339 } TT_DriverRec; 340 341 342 /* Note: All of the functions below (except tt_size_reset()) are used */ 343 /* as function pointers in a FT_Driver_ClassRec. Therefore their */ 344 /* parameters are of types FT_Face, FT_Size, etc., rather than TT_Face, */ 345 /* TT_Size, etc., so that the compiler can confirm that the types and */ 346 /* number of parameters are correct. In all cases the FT_xxx types are */ 347 /* cast to their TT_xxx counterparts inside the functions since FreeType */ 348 /* will always use the TT driver to create them. */ 349 350 351 /************************************************************************** 352 * 353 * Face functions 354 */ 355 FT_LOCAL( FT_Error ) 356 tt_face_init( FT_Stream stream, 357 FT_Face ttface, /* TT_Face */ 358 FT_Int face_index, 359 FT_Int num_params, 360 FT_Parameter* params ); 361 362 FT_LOCAL( void ) 363 tt_face_done( FT_Face ttface ); /* TT_Face */ 364 365 366 /************************************************************************** 367 * 368 * Size functions 369 */ 370 FT_LOCAL( FT_Error ) 371 tt_size_init( FT_Size ttsize ); /* TT_Size */ 372 373 FT_LOCAL( void ) 374 tt_size_done( FT_Size ttsize ); /* TT_Size */ 375 376 #ifdef TT_USE_BYTECODE_INTERPRETER 377 378 FT_LOCAL( FT_Error ) 379 tt_size_run_fpgm( TT_Size size, 380 FT_Bool pedantic ); 381 382 FT_LOCAL( FT_Error ) 383 tt_size_run_prep( TT_Size size, 384 FT_Bool pedantic ); 385 386 FT_LOCAL( FT_Error ) 387 tt_size_ready_bytecode( TT_Size size, 388 FT_Bool pedantic ); 389 390 #endif /* TT_USE_BYTECODE_INTERPRETER */ 391 392 FT_LOCAL( FT_Error ) 393 tt_size_reset( TT_Size size, 394 FT_Bool only_height ); 395 396 397 /************************************************************************** 398 * 399 * Driver functions 400 */ 401 FT_LOCAL( FT_Error ) 402 tt_driver_init( FT_Module ttdriver ); /* TT_Driver */ 403 404 FT_LOCAL( void ) 405 tt_driver_done( FT_Module ttdriver ); /* TT_Driver */ 406 407 408 /************************************************************************** 409 * 410 * Slot functions 411 */ 412 FT_LOCAL( FT_Error ) 413 tt_slot_init( FT_GlyphSlot slot ); 414 415 416 /* auxiliary */ 417 #define IS_HINTED( flags ) ( ( flags & FT_LOAD_NO_HINTING ) == 0 ) 418 419 420 FT_END_HEADER 421 422 #endif /* TTOBJS_H_ */ 423 424 425 /* END */ 426