1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) 2014 Panasonic Corporation
4 * Copyright (C) 2015-2016 Socionext Inc.
5 */
6
7 #include <linux/bitops.h>
8 #include <linux/errno.h>
9 #include <linux/io.h>
10 #include <linux/printk.h>
11
12 #include "ddrphy-init.h"
13 #include "ddrphy-regs.h"
14
15 enum dram_freq {
16 DRAM_FREQ_1333M,
17 DRAM_FREQ_1600M,
18 DRAM_FREQ_NR,
19 };
20
21 static u32 ddrphy_ptr0[DRAM_FREQ_NR] = {0x0a806844, 0x0c807d04};
22 static u32 ddrphy_ptr1[DRAM_FREQ_NR] = {0x208e0124, 0x2710015E};
23 static u32 ddrphy_ptr3[DRAM_FREQ_NR] = {0x0f051616, 0x12061A80};
24 static u32 ddrphy_ptr4[DRAM_FREQ_NR] = {0x06ae08d6, 0x08027100};
25 static u32 ddrphy_dtpr0[DRAM_FREQ_NR] = {0x85589955, 0x999cbb66};
26 static u32 ddrphy_dtpr1[DRAM_FREQ_NR] = {0x1a8363c0, 0x1a878400};
27 static u32 ddrphy_dtpr2[DRAM_FREQ_NR] = {0x5002c200, 0xa00214f8};
28 static u32 ddrphy_mr0[DRAM_FREQ_NR] = {0x00000b51, 0x00000d71};
29 static u32 ddrphy_mr2[DRAM_FREQ_NR] = {0x00000290, 0x00000298};
30
uniphier_ld4_ddrphy_init(void __iomem * phy_base,int freq,bool ddr3plus)31 int uniphier_ld4_ddrphy_init(void __iomem *phy_base, int freq, bool ddr3plus)
32 {
33 enum dram_freq freq_e;
34 u32 tmp;
35
36 switch (freq) {
37 case 1333:
38 freq_e = DRAM_FREQ_1333M;
39 break;
40 case 1600:
41 freq_e = DRAM_FREQ_1600M;
42 break;
43 default:
44 pr_err("unsupported DRAM frequency %d MHz\n", freq);
45 return -EINVAL;
46 }
47
48 writel(0x0300c473, phy_base + PHY_PGCR1);
49 writel(ddrphy_ptr0[freq_e], phy_base + PHY_PTR0);
50 writel(ddrphy_ptr1[freq_e], phy_base + PHY_PTR1);
51 writel(0x00083DEF, phy_base + PHY_PTR2);
52 writel(ddrphy_ptr3[freq_e], phy_base + PHY_PTR3);
53 writel(ddrphy_ptr4[freq_e], phy_base + PHY_PTR4);
54 writel(0xF004001A, phy_base + PHY_DSGCR);
55
56 /* change the value of the on-die pull-up/pull-down registors */
57 tmp = readl(phy_base + PHY_DXCCR);
58 tmp &= ~0x0ee0;
59 tmp |= PHY_DXCCR_DQSNRES_688_OHM | PHY_DXCCR_DQSRES_688_OHM;
60 writel(tmp, phy_base + PHY_DXCCR);
61
62 writel(0x0000040B, phy_base + PHY_DCR);
63 writel(ddrphy_dtpr0[freq_e], phy_base + PHY_DTPR0);
64 writel(ddrphy_dtpr1[freq_e], phy_base + PHY_DTPR1);
65 writel(ddrphy_dtpr2[freq_e], phy_base + PHY_DTPR2);
66 writel(ddrphy_mr0[freq_e], phy_base + PHY_MR0);
67 writel(0x00000006, phy_base + PHY_MR1);
68 writel(ddrphy_mr2[freq_e], phy_base + PHY_MR2);
69 writel(ddr3plus ? 0x00000800 : 0x00000000, phy_base + PHY_MR3);
70
71 while (!(readl(phy_base + PHY_PGSR0) & PHY_PGSR0_IDONE))
72 ;
73
74 writel(0x0300C473, phy_base + PHY_PGCR1);
75 writel(0x0000005D, phy_base + PHY_ZQ_BASE + PHY_ZQ_CR1);
76
77 return 0;
78 }
79