1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (C) 2013-2014 Panasonic Corporation
4 * Copyright (C) 2015-2016 Socionext Inc.
5 */
6
7 #include <linux/delay.h>
8 #include <linux/io.h>
9
10 #include "../init.h"
11 #include "../sc-regs.h"
12 #include "../sg-regs.h"
13 #include "pll.h"
14
vpll_init(void)15 static void vpll_init(void)
16 {
17 u32 tmp, clk_mode_axosel;
18
19 /* Set VPLL27A & VPLL27B */
20 tmp = readl(SG_PINMON0);
21 clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
22
23 /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
24 if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
25 clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
26 return;
27
28 /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
29 tmp = readl(SC_VPLL27ACTRL);
30 tmp |= 0x00000001;
31 writel(tmp, SC_VPLL27ACTRL);
32 tmp = readl(SC_VPLL27BCTRL);
33 tmp |= 0x00000001;
34 writel(tmp, SC_VPLL27BCTRL);
35
36 /* Unset VPLA_K_LD and VPLB_K_LD bit */
37 tmp = readl(SC_VPLL27ACTRL3);
38 tmp &= ~0x10000000;
39 writel(tmp, SC_VPLL27ACTRL3);
40 tmp = readl(SC_VPLL27BCTRL3);
41 tmp &= ~0x10000000;
42 writel(tmp, SC_VPLL27BCTRL3);
43
44 /* Set VPLA_M and VPLB_M to 0x20 */
45 tmp = readl(SC_VPLL27ACTRL2);
46 tmp &= ~0x0000007f;
47 tmp |= 0x00000020;
48 writel(tmp, SC_VPLL27ACTRL2);
49 tmp = readl(SC_VPLL27BCTRL2);
50 tmp &= ~0x0000007f;
51 tmp |= 0x00000020;
52 writel(tmp, SC_VPLL27BCTRL2);
53
54 if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
55 clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
56 /* Set VPLA_K and VPLB_K for AXO: 25MHz */
57 tmp = readl(SC_VPLL27ACTRL3);
58 tmp &= ~0x000fffff;
59 tmp |= 0x00066666;
60 writel(tmp, SC_VPLL27ACTRL3);
61 tmp = readl(SC_VPLL27BCTRL3);
62 tmp &= ~0x000fffff;
63 tmp |= 0x00066666;
64 writel(tmp, SC_VPLL27BCTRL3);
65 } else {
66 /* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
67 tmp = readl(SC_VPLL27ACTRL3);
68 tmp &= ~0x000fffff;
69 tmp |= 0x000f5800;
70 writel(tmp, SC_VPLL27ACTRL3);
71 tmp = readl(SC_VPLL27BCTRL3);
72 tmp &= ~0x000fffff;
73 tmp |= 0x000f5800;
74 writel(tmp, SC_VPLL27BCTRL3);
75 }
76
77 /* wait 1 usec */
78 udelay(1);
79
80 /* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
81 tmp = readl(SC_VPLL27ACTRL3);
82 tmp |= 0x10000000;
83 writel(tmp, SC_VPLL27ACTRL3);
84 tmp = readl(SC_VPLL27BCTRL3);
85 tmp |= 0x10000000;
86 writel(tmp, SC_VPLL27BCTRL3);
87
88 /* Unset VPLA_SNRST and VPLB_SNRST bit */
89 tmp = readl(SC_VPLL27ACTRL2);
90 tmp |= 0x10000000;
91 writel(tmp, SC_VPLL27ACTRL2);
92 tmp = readl(SC_VPLL27BCTRL2);
93 tmp |= 0x10000000;
94 writel(tmp, SC_VPLL27BCTRL2);
95
96 /* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
97 tmp = readl(SC_VPLL27ACTRL);
98 tmp &= ~0x00000001;
99 writel(tmp, SC_VPLL27ACTRL);
100 tmp = readl(SC_VPLL27BCTRL);
101 tmp &= ~0x00000001;
102 writel(tmp, SC_VPLL27BCTRL);
103 }
104
uniphier_pro4_pll_init(void)105 void uniphier_pro4_pll_init(void)
106 {
107 vpll_init();
108 uniphier_ld4_dpll_ssc_en();
109 }
110