1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2010 4 * Marvell Semiconductor <www.marvell.com> 5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com> 6 * Contributor: Mahavir Jain <mjain@marvell.com> 7 */ 8 9 #ifndef _ASM_ARCH_ARMADA100_H 10 #define _ASM_ARCH_ARMADA100_H 11 12 #if defined (CONFIG_ARMADA100) 13 14 /* Common APB clock register bit definitions */ 15 #define APBC_APBCLK (1<<0) /* APB Bus Clock Enable */ 16 #define APBC_FNCLK (1<<1) /* Functional Clock Enable */ 17 #define APBC_RST (1<<2) /* Reset Generation */ 18 /* Functional Clock Selection Mask */ 19 #define APBC_FNCLKSEL(x) (((x) & 0xf) << 4) 20 21 /* Fast Ethernet Controller Clock register definition */ 22 #define FE_CLK_RST 0x1 23 #define FE_CLK_ENA 0x8 24 25 /* SSP2 Clock Control */ 26 #define SSP2_APBCLK 0x01 27 #define SSP2_FNCLK 0x02 28 29 /* USB Clock/reset control bits */ 30 #define USB_SPH_AXICLK_EN 0x10 31 #define USB_SPH_AXI_RST 0x02 32 33 /* MPMU Clocks */ 34 #define APB2_26M_EN (1 << 20) 35 #define AP_26M (1 << 4) 36 37 /* Register Base Addresses */ 38 #define ARMD1_DRAM_BASE 0xB0000000 39 #define ARMD1_FEC_BASE 0xC0800000 40 #define ARMD1_TIMER_BASE 0xD4014000 41 #define ARMD1_APBC1_BASE 0xD4015000 42 #define ARMD1_APBC2_BASE 0xD4015800 43 #define ARMD1_UART1_BASE 0xD4017000 44 #define ARMD1_UART2_BASE 0xD4018000 45 #define ARMD1_GPIO_BASE 0xD4019000 46 #define ARMD1_SSP1_BASE 0xD401B000 47 #define ARMD1_SSP2_BASE 0xD401C000 48 #define ARMD1_MFPR_BASE 0xD401E000 49 #define ARMD1_SSP3_BASE 0xD401F000 50 #define ARMD1_SSP4_BASE 0xD4020000 51 #define ARMD1_SSP5_BASE 0xD4021000 52 #define ARMD1_UART3_BASE 0xD4026000 53 #define ARMD1_MPMU_BASE 0xD4050000 54 #define ARMD1_USB_HOST_BASE 0xD4209000 55 #define ARMD1_APMU_BASE 0xD4282800 56 #define ARMD1_CPU_BASE 0xD4282C00 57 58 #endif /* CONFIG_ARMADA100 */ 59 #endif /* _ASM_ARCH_ARMADA100_H */ 60