• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Configuration file for the SAMA5D27 SOM1 EK Board.
4  *
5  * Copyright (C) 2017 Microchip Corporation
6  *		      Wenyou Yang <wenyou.yang@microchip.com>
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #include "at91-sama5_common.h"
13 
14 #undef CONFIG_SYS_AT91_MAIN_CLOCK
15 #define CONFIG_SYS_AT91_MAIN_CLOCK      24000000 /* from 24 MHz crystal */
16 
17 #define CONFIG_MISC_INIT_R
18 
19 /* SDRAM */
20 #define CONFIG_NR_DRAM_BANKS		1
21 #define CONFIG_SYS_SDRAM_BASE		0x20000000
22 #define CONFIG_SYS_SDRAM_SIZE		0x8000000
23 
24 #ifdef CONFIG_SPL_BUILD
25 #define CONFIG_SYS_INIT_SP_ADDR		0x218000
26 #else
27 #define CONFIG_SYS_INIT_SP_ADDR \
28 	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
29 #endif
30 
31 #define CONFIG_SYS_LOAD_ADDR		0x22000000 /* load address */
32 
33 /* NAND flash */
34 #undef CONFIG_CMD_NAND
35 
36 /* SPI flash */
37 #define CONFIG_SF_DEFAULT_SPEED		66000000
38 
39 #undef CONFIG_BOOTCOMMAND
40 #ifdef CONFIG_SD_BOOT
41 /* u-boot env in sd/mmc card */
42 #define FAT_ENV_INTERFACE	"mmc"
43 #define FAT_ENV_DEVICE_AND_PART	"0"
44 #define FAT_ENV_FILE		"uboot.env"
45 #define CONFIG_ENV_SIZE		0x4000
46 /* bootstrap + u-boot + env in sd card */
47 #define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x21000000 at91-sama5d27_som1_ek.dtb; " \
48 				"fatload mmc 0:1 0x22000000 zImage; " \
49 				"bootz 0x22000000 - 0x21000000"
50 #undef CONFIG_BOOTARGS
51 #define CONFIG_BOOTARGS \
52 	"console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
53 #endif
54 
55 #ifdef CONFIG_QSPI_BOOT
56 #define CONFIG_ENV_OFFSET		0xb0000
57 #define CONFIG_ENV_SIZE			0x10000
58 #define CONFIG_ENV_SECT_SIZE		0x10000
59 #define CONFIG_BOOTCOMMAND		"sf probe 0; "				\
60 					"sf read 0x21000000 0xc0000 0x20000; "	\
61 					"sf read 0x22000000 0xe0000 0x400000; "	\
62 					"bootz 0x22000000 - 0x21000000"
63 #undef CONFIG_BOOTARGS
64 #define CONFIG_BOOTARGS \
65 	"console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
66 #endif
67 
68 /* SPL */
69 #define CONFIG_SPL_TEXT_BASE		0x200000
70 #define CONFIG_SPL_MAX_SIZE		0x10000
71 #define CONFIG_SPL_BSS_START_ADDR	0x20000000
72 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
73 #define CONFIG_SYS_SPL_MALLOC_START	0x20080000
74 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000
75 
76 #define CONFIG_SYS_MONITOR_LEN		(512 << 10)
77 
78 #ifdef CONFIG_SD_BOOT
79 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
80 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"
81 #endif
82 
83 #ifdef CONFIG_QSPI_BOOT
84 #define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000
85 #endif
86 
87 #endif
88