• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * Copyright (C) 2016 ARM Ltd.
3 * based on the Allwinner H3 dtsi:
4 *    Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This file is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License as
13 *     published by the Free Software Foundation; either version 2 of the
14 *     License, or (at your option) any later version.
15 *
16 *     This file is distributed in the hope that it will be useful,
17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 *     GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 *  b) Permission is hereby granted, free of charge, to any person
24 *     obtaining a copy of this software and associated documentation
25 *     files (the "Software"), to deal in the Software without
26 *     restriction, including without limitation the rights to use,
27 *     copy, modify, merge, publish, distribute, sublicense, and/or
28 *     sell copies of the Software, and to permit persons to whom the
29 *     Software is furnished to do so, subject to the following
30 *     conditions:
31 *
32 *     The above copyright notice and this permission notice shall be
33 *     included in all copies or substantial portions of the Software.
34 *
35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 *     OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45#include <dt-bindings/clock/sun50i-a64-ccu.h>
46#include <dt-bindings/interrupt-controller/arm-gic.h>
47#include <dt-bindings/reset/sun50i-a64-ccu.h>
48
49/ {
50	interrupt-parent = <&gic>;
51	#address-cells = <1>;
52	#size-cells = <1>;
53
54	cpus {
55		#address-cells = <1>;
56		#size-cells = <0>;
57
58		cpu0: cpu@0 {
59			compatible = "arm,cortex-a53", "arm,armv8";
60			device_type = "cpu";
61			reg = <0>;
62			enable-method = "psci";
63		};
64
65		cpu1: cpu@1 {
66			compatible = "arm,cortex-a53", "arm,armv8";
67			device_type = "cpu";
68			reg = <1>;
69			enable-method = "psci";
70		};
71
72		cpu2: cpu@2 {
73			compatible = "arm,cortex-a53", "arm,armv8";
74			device_type = "cpu";
75			reg = <2>;
76			enable-method = "psci";
77		};
78
79		cpu3: cpu@3 {
80			compatible = "arm,cortex-a53", "arm,armv8";
81			device_type = "cpu";
82			reg = <3>;
83			enable-method = "psci";
84		};
85	};
86
87	osc24M: osc24M_clk {
88		#clock-cells = <0>;
89		compatible = "fixed-clock";
90		clock-frequency = <24000000>;
91		clock-output-names = "osc24M";
92	};
93
94	osc32k: osc32k_clk {
95		#clock-cells = <0>;
96		compatible = "fixed-clock";
97		clock-frequency = <32768>;
98		clock-output-names = "osc32k";
99	};
100
101	iosc: internal-osc-clk {
102		#clock-cells = <0>;
103		compatible = "fixed-clock";
104		clock-frequency = <16000000>;
105		clock-accuracy = <300000000>;
106		clock-output-names = "iosc";
107	};
108
109	psci {
110		compatible = "arm,psci-0.2";
111		method = "smc";
112	};
113
114	timer {
115		compatible = "arm,armv8-timer";
116		interrupts = <GIC_PPI 13
117			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
118			     <GIC_PPI 14
119			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
120			     <GIC_PPI 11
121			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
122			     <GIC_PPI 10
123			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
124	};
125
126	soc {
127		compatible = "simple-bus";
128		#address-cells = <1>;
129		#size-cells = <1>;
130		ranges;
131
132		mmc0: mmc@1c0f000 {
133			compatible = "allwinner,sun50i-a64-mmc";
134			reg = <0x01c0f000 0x1000>;
135			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
136			clock-names = "ahb", "mmc";
137			resets = <&ccu RST_BUS_MMC0>;
138			reset-names = "ahb";
139			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
140			max-frequency = <150000000>;
141			status = "disabled";
142			#address-cells = <1>;
143			#size-cells = <0>;
144		};
145
146		mmc1: mmc@1c10000 {
147			compatible = "allwinner,sun50i-a64-mmc";
148			reg = <0x01c10000 0x1000>;
149			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
150			clock-names = "ahb", "mmc";
151			resets = <&ccu RST_BUS_MMC1>;
152			reset-names = "ahb";
153			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
154			max-frequency = <150000000>;
155			status = "disabled";
156			#address-cells = <1>;
157			#size-cells = <0>;
158		};
159
160		mmc2: mmc@1c11000 {
161			compatible = "allwinner,sun50i-a64-emmc";
162			reg = <0x01c11000 0x1000>;
163			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
164			clock-names = "ahb", "mmc";
165			resets = <&ccu RST_BUS_MMC2>;
166			reset-names = "ahb";
167			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
168			max-frequency = <200000000>;
169			status = "disabled";
170			#address-cells = <1>;
171			#size-cells = <0>;
172		};
173
174		usb_otg: usb@01c19000 {
175			compatible = "allwinner,sun8i-a33-musb";
176			reg = <0x01c19000 0x0400>;
177			clocks = <&ccu CLK_BUS_OTG>;
178			resets = <&ccu RST_BUS_OTG>;
179			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
180			interrupt-names = "mc";
181			phys = <&usbphy 0>;
182			phy-names = "usb";
183			extcon = <&usbphy 0>;
184			status = "disabled";
185		};
186
187		usbphy: phy@01c19400 {
188			compatible = "allwinner,sun50i-a64-usb-phy";
189			reg = <0x01c19400 0x14>,
190			      <0x01c1a800 0x4>,
191			      <0x01c1b800 0x4>;
192			reg-names = "phy_ctrl",
193				    "pmu0",
194				    "pmu1";
195			clocks = <&ccu CLK_USB_PHY0>,
196				 <&ccu CLK_USB_PHY1>;
197			clock-names = "usb0_phy",
198				      "usb1_phy";
199			resets = <&ccu RST_USB_PHY0>,
200				 <&ccu RST_USB_PHY1>;
201			reset-names = "usb0_reset",
202				      "usb1_reset";
203			status = "disabled";
204			#phy-cells = <1>;
205		};
206
207		ehci0: usb@01c1a000 {
208			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
209			reg = <0x01c1a000 0x100>;
210			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
211			clocks = <&ccu CLK_BUS_OHCI0>,
212				 <&ccu CLK_BUS_EHCI0>,
213				 <&ccu CLK_USB_OHCI0>;
214			resets = <&ccu RST_BUS_OHCI0>,
215				 <&ccu RST_BUS_EHCI0>;
216			status = "disabled";
217		};
218
219		ohci0: usb@01c1a400 {
220			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
221			reg = <0x01c1a400 0x100>;
222			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
223			clocks = <&ccu CLK_BUS_OHCI0>,
224				 <&ccu CLK_USB_OHCI0>;
225			resets = <&ccu RST_BUS_OHCI0>;
226			status = "disabled";
227		};
228
229		ehci1: usb@01c1b000 {
230			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
231			reg = <0x01c1b000 0x100>;
232			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
233			clocks = <&ccu CLK_BUS_OHCI1>,
234				 <&ccu CLK_BUS_EHCI1>,
235				 <&ccu CLK_USB_OHCI1>;
236			resets = <&ccu RST_BUS_OHCI1>,
237				 <&ccu RST_BUS_EHCI1>;
238			phys = <&usbphy 1>;
239			phy-names = "usb";
240			status = "disabled";
241		};
242
243		ohci1: usb@01c1b400 {
244			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
245			reg = <0x01c1b400 0x100>;
246			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
247			clocks = <&ccu CLK_BUS_OHCI1>,
248				 <&ccu CLK_USB_OHCI1>;
249			resets = <&ccu RST_BUS_OHCI1>;
250			phys = <&usbphy 1>;
251			phy-names = "usb";
252			status = "disabled";
253		};
254
255		ccu: clock@01c20000 {
256			compatible = "allwinner,sun50i-a64-ccu";
257			reg = <0x01c20000 0x400>;
258			clocks = <&osc24M>, <&osc32k>;
259			clock-names = "hosc", "losc";
260			#clock-cells = <1>;
261			#reset-cells = <1>;
262		};
263
264		pio: pinctrl@1c20800 {
265			compatible = "allwinner,sun50i-a64-pinctrl";
266			reg = <0x01c20800 0x400>;
267			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
268				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
269				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
270			clocks = <&ccu 58>;
271			gpio-controller;
272			#gpio-cells = <3>;
273			interrupt-controller;
274			#interrupt-cells = <3>;
275
276			i2c1_pins: i2c1_pins {
277				pins = "PH2", "PH3";
278				function = "i2c1";
279			};
280
281			mmc0_pins: mmc0-pins {
282				pins = "PF0", "PF1", "PF2", "PF3",
283				       "PF4", "PF5";
284				function = "mmc0";
285				drive-strength = <30>;
286				bias-pull-up;
287			};
288
289			mmc1_pins: mmc1-pins {
290				pins = "PG0", "PG1", "PG2", "PG3",
291				       "PG4", "PG5";
292				function = "mmc1";
293				drive-strength = <30>;
294				bias-pull-up;
295			};
296
297			mmc2_pins: mmc2-pins {
298				pins = "PC1", "PC5", "PC6", "PC8", "PC9",
299				       "PC10","PC11", "PC12", "PC13",
300				       "PC14", "PC15", "PC16";
301				function = "mmc2";
302				drive-strength = <30>;
303				bias-pull-up;
304			};
305
306			uart0_pins_a: uart0@0 {
307				pins = "PB8", "PB9";
308				function = "uart0";
309			};
310
311			uart1_pins: uart1_pins {
312				pins = "PG6", "PG7";
313				function = "uart1";
314			};
315
316			uart1_rts_cts_pins: uart1_rts_cts_pins {
317				pins = "PG8", "PG9";
318				function = "uart1";
319			};
320		};
321
322		pwm: pwm@01c21400 {
323			compatible = "allwinner,sun50i-a64-pwm",
324				     "allwinner,sun5i-a13-pwm";
325			reg = <0x01c21400 0x8>;
326			clocks = <&osc24M>;
327			#pwm-cells = <3>;
328			status = "disabled";
329		};
330
331		uart0: serial@1c28000 {
332			compatible = "snps,dw-apb-uart";
333			reg = <0x01c28000 0x400>;
334			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
335			reg-shift = <2>;
336			reg-io-width = <4>;
337			clocks = <&ccu 67>;
338			resets = <&ccu 46>;
339			status = "disabled";
340		};
341
342		uart1: serial@1c28400 {
343			compatible = "snps,dw-apb-uart";
344			reg = <0x01c28400 0x400>;
345			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
346			reg-shift = <2>;
347			reg-io-width = <4>;
348			clocks = <&ccu 68>;
349			resets = <&ccu 47>;
350			status = "disabled";
351		};
352
353		uart2: serial@1c28800 {
354			compatible = "snps,dw-apb-uart";
355			reg = <0x01c28800 0x400>;
356			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
357			reg-shift = <2>;
358			reg-io-width = <4>;
359			clocks = <&ccu 69>;
360			resets = <&ccu 48>;
361			status = "disabled";
362		};
363
364		uart3: serial@1c28c00 {
365			compatible = "snps,dw-apb-uart";
366			reg = <0x01c28c00 0x400>;
367			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
368			reg-shift = <2>;
369			reg-io-width = <4>;
370			clocks = <&ccu 70>;
371			resets = <&ccu 49>;
372			status = "disabled";
373		};
374
375		uart4: serial@1c29000 {
376			compatible = "snps,dw-apb-uart";
377			reg = <0x01c29000 0x400>;
378			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
379			reg-shift = <2>;
380			reg-io-width = <4>;
381			clocks = <&ccu 71>;
382			resets = <&ccu 50>;
383			status = "disabled";
384		};
385
386		i2c0: i2c@1c2ac00 {
387			compatible = "allwinner,sun6i-a31-i2c";
388			reg = <0x01c2ac00 0x400>;
389			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
390			clocks = <&ccu 63>;
391			resets = <&ccu 42>;
392			status = "disabled";
393			#address-cells = <1>;
394			#size-cells = <0>;
395		};
396
397		i2c1: i2c@1c2b000 {
398			compatible = "allwinner,sun6i-a31-i2c";
399			reg = <0x01c2b000 0x400>;
400			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
401			clocks = <&ccu 64>;
402			resets = <&ccu 43>;
403			status = "disabled";
404			#address-cells = <1>;
405			#size-cells = <0>;
406		};
407
408		i2c2: i2c@1c2b400 {
409			compatible = "allwinner,sun6i-a31-i2c";
410			reg = <0x01c2b400 0x400>;
411			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
412			clocks = <&ccu 65>;
413			resets = <&ccu 44>;
414			status = "disabled";
415			#address-cells = <1>;
416			#size-cells = <0>;
417		};
418
419		gic: interrupt-controller@1c81000 {
420			compatible = "arm,gic-400";
421			reg = <0x01c81000 0x1000>,
422			      <0x01c82000 0x2000>,
423			      <0x01c84000 0x2000>,
424			      <0x01c86000 0x2000>;
425			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
426			interrupt-controller;
427			#interrupt-cells = <3>;
428		};
429
430		rtc: rtc@1f00000 {
431			compatible = "allwinner,sun6i-a31-rtc";
432			reg = <0x01f00000 0x54>;
433			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
434				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
435		};
436
437		r_ccu: clock@1f01400 {
438			compatible = "allwinner,sun50i-a64-r-ccu";
439			reg = <0x01f01400 0x100>;
440			clocks = <&osc24M>, <&osc32k>, <&iosc>;
441			clock-names = "hosc", "losc", "iosc";
442			#clock-cells = <1>;
443			#reset-cells = <1>;
444		};
445
446		r_pio: pinctrl@01f02c00 {
447			compatible = "allwinner,sun50i-a64-r-pinctrl";
448			reg = <0x01f02c00 0x400>;
449			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
450			clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
451			clock-names = "apb", "hosc", "losc";
452			gpio-controller;
453			#gpio-cells = <3>;
454			interrupt-controller;
455			#interrupt-cells = <3>;
456		};
457	};
458};
459