1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (c) 2011 The Chromium OS Authors.
4 */
5
6 #include <common.h>
7 #include <dm.h>
8 #include <errno.h>
9 #include <malloc.h>
10 #include <usb.h>
11 #include <dm/device-internal.h>
12
13 #include "usb_ether.h"
14
15 #ifdef CONFIG_DM_ETH
16
17 #define USB_BULK_RECV_TIMEOUT 500
18
usb_ether_register(struct udevice * dev,struct ueth_data * ueth,int rxsize)19 int usb_ether_register(struct udevice *dev, struct ueth_data *ueth, int rxsize)
20 {
21 struct usb_device *udev = dev_get_parent_priv(dev);
22 struct usb_interface_descriptor *iface_desc;
23 bool ep_in_found = false, ep_out_found = false;
24 struct usb_interface *iface;
25 const int ifnum = 0; /* Always use interface 0 */
26 int ret, i;
27
28 iface = &udev->config.if_desc[ifnum];
29 iface_desc = &udev->config.if_desc[ifnum].desc;
30
31 /* Initialize the ueth_data structure with some useful info */
32 ueth->ifnum = ifnum;
33 ueth->subclass = iface_desc->bInterfaceSubClass;
34 ueth->protocol = iface_desc->bInterfaceProtocol;
35
36 /*
37 * We are expecting a minimum of 3 endpoints - in, out (bulk), and int.
38 * We will ignore any others.
39 */
40 for (i = 0; i < iface_desc->bNumEndpoints; i++) {
41 int ep_addr = iface->ep_desc[i].bEndpointAddress;
42
43 /* is it an BULK endpoint? */
44 if ((iface->ep_desc[i].bmAttributes &
45 USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
46 if (ep_addr & USB_DIR_IN && !ep_in_found) {
47 ueth->ep_in = ep_addr &
48 USB_ENDPOINT_NUMBER_MASK;
49 ep_in_found = true;
50 } else if (!(ep_addr & USB_DIR_IN) && !ep_out_found) {
51 ueth->ep_out = ep_addr &
52 USB_ENDPOINT_NUMBER_MASK;
53 ep_out_found = true;
54 }
55 }
56
57 /* is it an interrupt endpoint? */
58 if ((iface->ep_desc[i].bmAttributes &
59 USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
60 ueth->ep_int = iface->ep_desc[i].bEndpointAddress &
61 USB_ENDPOINT_NUMBER_MASK;
62 ueth->irqinterval = iface->ep_desc[i].bInterval;
63 }
64 }
65 debug("Endpoints In %d Out %d Int %d\n", ueth->ep_in, ueth->ep_out,
66 ueth->ep_int);
67
68 /* Do some basic sanity checks, and bail if we find a problem */
69 if (!ueth->ep_in || !ueth->ep_out || !ueth->ep_int) {
70 debug("%s: %s: Cannot find endpoints\n", __func__, dev->name);
71 return -ENXIO;
72 }
73
74 ueth->rxsize = rxsize;
75 ueth->rxbuf = memalign(ARCH_DMA_MINALIGN, rxsize);
76 if (!ueth->rxbuf)
77 return -ENOMEM;
78
79 ret = usb_set_interface(udev, iface_desc->bInterfaceNumber, ifnum);
80 if (ret) {
81 debug("%s: %s: Cannot set interface: %d\n", __func__, dev->name,
82 ret);
83 return ret;
84 }
85 ueth->pusb_dev = udev;
86
87 return 0;
88 }
89
usb_ether_deregister(struct ueth_data * ueth)90 int usb_ether_deregister(struct ueth_data *ueth)
91 {
92 return 0;
93 }
94
usb_ether_receive(struct ueth_data * ueth,int rxsize)95 int usb_ether_receive(struct ueth_data *ueth, int rxsize)
96 {
97 int actual_len;
98 int ret;
99
100 if (rxsize > ueth->rxsize)
101 return -EINVAL;
102 ret = usb_bulk_msg(ueth->pusb_dev,
103 usb_rcvbulkpipe(ueth->pusb_dev, ueth->ep_in),
104 ueth->rxbuf, rxsize, &actual_len,
105 USB_BULK_RECV_TIMEOUT);
106 debug("Rx: len = %u, actual = %u, err = %d\n", rxsize, actual_len, ret);
107 if (ret) {
108 printf("Rx: failed to receive: %d\n", ret);
109 return ret;
110 }
111 if (actual_len > rxsize) {
112 debug("Rx: received too many bytes %d\n", actual_len);
113 return -ENOSPC;
114 }
115 ueth->rxlen = actual_len;
116 ueth->rxptr = 0;
117
118 return actual_len ? 0 : -EAGAIN;
119 }
120
usb_ether_advance_rxbuf(struct ueth_data * ueth,int num_bytes)121 void usb_ether_advance_rxbuf(struct ueth_data *ueth, int num_bytes)
122 {
123 ueth->rxptr += num_bytes;
124 if (num_bytes < 0 || ueth->rxptr >= ueth->rxlen)
125 ueth->rxlen = 0;
126 }
127
usb_ether_get_rx_bytes(struct ueth_data * ueth,uint8_t ** ptrp)128 int usb_ether_get_rx_bytes(struct ueth_data *ueth, uint8_t **ptrp)
129 {
130 if (!ueth->rxlen)
131 return 0;
132
133 *ptrp = &ueth->rxbuf[ueth->rxptr];
134
135 return ueth->rxlen - ueth->rxptr;
136 }
137
138 #else
139
140 typedef void (*usb_eth_before_probe)(void);
141 typedef int (*usb_eth_probe)(struct usb_device *dev, unsigned int ifnum,
142 struct ueth_data *ss);
143 typedef int (*usb_eth_get_info)(struct usb_device *dev, struct ueth_data *ss,
144 struct eth_device *dev_desc);
145
146 struct usb_eth_prob_dev {
147 usb_eth_before_probe before_probe; /* optional */
148 usb_eth_probe probe;
149 usb_eth_get_info get_info;
150 };
151
152 /* driver functions go here, each bracketed by #ifdef CONFIG_USB_ETHER_xxx */
153 static const struct usb_eth_prob_dev prob_dev[] = {
154 #ifdef CONFIG_USB_ETHER_ASIX
155 {
156 .before_probe = asix_eth_before_probe,
157 .probe = asix_eth_probe,
158 .get_info = asix_eth_get_info,
159 },
160 #endif
161 #ifdef CONFIG_USB_ETHER_ASIX88179
162 {
163 .before_probe = ax88179_eth_before_probe,
164 .probe = ax88179_eth_probe,
165 .get_info = ax88179_eth_get_info,
166 },
167 #endif
168 #ifdef CONFIG_USB_ETHER_MCS7830
169 {
170 .before_probe = mcs7830_eth_before_probe,
171 .probe = mcs7830_eth_probe,
172 .get_info = mcs7830_eth_get_info,
173 },
174 #endif
175 #ifdef CONFIG_USB_ETHER_SMSC95XX
176 {
177 .before_probe = smsc95xx_eth_before_probe,
178 .probe = smsc95xx_eth_probe,
179 .get_info = smsc95xx_eth_get_info,
180 },
181 #endif
182 #ifdef CONFIG_USB_ETHER_RTL8152
183 {
184 .before_probe = r8152_eth_before_probe,
185 .probe = r8152_eth_probe,
186 .get_info = r8152_eth_get_info,
187 },
188 #endif
189 { }, /* END */
190 };
191
192 static int usb_max_eth_dev; /* number of highest available usb eth device */
193 static struct ueth_data usb_eth[USB_MAX_ETH_DEV];
194
195 /*******************************************************************************
196 * tell if current ethernet device is a usb dongle
197 */
is_eth_dev_on_usb_host(void)198 int is_eth_dev_on_usb_host(void)
199 {
200 int i;
201 struct eth_device *dev = eth_get_dev();
202
203 if (dev) {
204 for (i = 0; i < usb_max_eth_dev; i++)
205 if (&usb_eth[i].eth_dev == dev)
206 return 1;
207 }
208 return 0;
209 }
210
211 /*
212 * Given a USB device, ask each driver if it can support it, and attach it
213 * to the first driver that says 'yes'
214 */
probe_valid_drivers(struct usb_device * dev)215 static void probe_valid_drivers(struct usb_device *dev)
216 {
217 struct eth_device *eth;
218 int j;
219
220 for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) {
221 if (!prob_dev[j].probe(dev, 0, &usb_eth[usb_max_eth_dev]))
222 continue;
223 /*
224 * ok, it is a supported eth device. Get info and fill it in
225 */
226 eth = &usb_eth[usb_max_eth_dev].eth_dev;
227 if (prob_dev[j].get_info(dev,
228 &usb_eth[usb_max_eth_dev],
229 eth)) {
230 /* found proper driver */
231 /* register with networking stack */
232 usb_max_eth_dev++;
233
234 /*
235 * usb_max_eth_dev must be incremented prior to this
236 * call since eth_current_changed (internally called)
237 * relies on it
238 */
239 eth_register(eth);
240 if (eth_write_hwaddr(eth, "usbeth",
241 usb_max_eth_dev - 1))
242 puts("Warning: failed to set MAC address\n");
243 break;
244 }
245 }
246 }
247
248 /*******************************************************************************
249 * scan the usb and reports device info
250 * to the user if mode = 1
251 * returns current device or -1 if no
252 */
usb_host_eth_scan(int mode)253 int usb_host_eth_scan(int mode)
254 {
255 int i, old_async;
256
257 if (mode == 1)
258 printf(" scanning usb for ethernet devices... ");
259
260 old_async = usb_disable_asynch(1); /* asynch transfer not allowed */
261
262 /* unregister a previously detected device */
263 for (i = 0; i < usb_max_eth_dev; i++)
264 eth_unregister(&usb_eth[i].eth_dev);
265
266 memset(usb_eth, 0, sizeof(usb_eth));
267
268 for (i = 0; prob_dev[i].probe; i++) {
269 if (prob_dev[i].before_probe)
270 prob_dev[i].before_probe();
271 }
272
273 usb_max_eth_dev = 0;
274 #ifdef CONFIG_DM_USB
275 /*
276 * TODO: We should add U_BOOT_USB_DEVICE() declarations to each USB
277 * Ethernet driver and then most of this file can be removed.
278 */
279 struct udevice *bus;
280 struct uclass *uc;
281 int ret;
282
283 ret = uclass_get(UCLASS_USB, &uc);
284 if (ret)
285 return ret;
286 uclass_foreach_dev(bus, uc) {
287 for (i = 0; i < USB_MAX_DEVICE; i++) {
288 struct usb_device *dev;
289
290 dev = usb_get_dev_index(bus, i); /* get device */
291 debug("i=%d, %s\n", i, dev ? dev->dev->name : "(done)");
292 if (!dev)
293 break; /* no more devices available */
294
295 /*
296 * find valid usb_ether driver for this device,
297 * if any
298 */
299 probe_valid_drivers(dev);
300
301 /* check limit */
302 if (usb_max_eth_dev == USB_MAX_ETH_DEV)
303 break;
304 } /* for */
305 }
306 #else
307 for (i = 0; i < USB_MAX_DEVICE; i++) {
308 struct usb_device *dev;
309
310 dev = usb_get_dev_index(i); /* get device */
311 debug("i=%d\n", i);
312 if (!dev)
313 break; /* no more devices available */
314
315 /* find valid usb_ether driver for this device, if any */
316 probe_valid_drivers(dev);
317
318 /* check limit */
319 if (usb_max_eth_dev == USB_MAX_ETH_DEV)
320 break;
321 } /* for */
322 #endif
323 if (usb_max_eth_dev == USB_MAX_ETH_DEV) {
324 printf("max USB Ethernet Device reached: %d stopping\n",
325 usb_max_eth_dev);
326 }
327 usb_disable_asynch(old_async); /* restore asynch value */
328 printf("%d Ethernet Device(s) found\n", usb_max_eth_dev);
329 if (usb_max_eth_dev > 0)
330 return 0;
331 return -1;
332 }
333 #endif
334