• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Video driver for Marvell Armada XP SoC
4  *
5  * Initialization of LCD interface and setup of SPLASH screen image
6  */
7 
8 #include <common.h>
9 #include <video_fb.h>
10 #include <linux/mbus.h>
11 #include <asm/io.h>
12 #include <asm/arch/cpu.h>
13 #include <asm/arch/soc.h>
14 
15 #define MVEBU_LCD_WIN_CONTROL(w)        (MVEBU_LCD_BASE + 0xf000 + ((w) << 4))
16 #define MVEBU_LCD_WIN_BASE(w)           (MVEBU_LCD_BASE + 0xf004 + ((w) << 4))
17 #define MVEBU_LCD_WIN_REMAP(w)          (MVEBU_LCD_BASE + 0xf00c + ((w) << 4))
18 
19 #define MVEBU_LCD_CFG_DMA_START_ADDR_0	(MVEBU_LCD_BASE + 0x00cc)
20 #define MVEBU_LCD_CFG_DMA_START_ADDR_1	(MVEBU_LCD_BASE + 0x00dc)
21 
22 #define MVEBU_LCD_CFG_GRA_START_ADDR0	(MVEBU_LCD_BASE + 0x00f4)
23 #define MVEBU_LCD_CFG_GRA_START_ADDR1	(MVEBU_LCD_BASE + 0x00f8)
24 #define MVEBU_LCD_CFG_GRA_PITCH		(MVEBU_LCD_BASE + 0x00fc)
25 #define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN	(MVEBU_LCD_BASE + 0x0100)
26 #define MVEBU_LCD_SPU_GRA_HPXL_VLN	(MVEBU_LCD_BASE + 0x0104)
27 #define MVEBU_LCD_SPU_GZM_HPXL_VLN	(MVEBU_LCD_BASE + 0x0108)
28 #define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN	(MVEBU_LCD_BASE + 0x010c)
29 #define MVEBU_LCD_SPU_HWC_HPXL_VLN	(MVEBU_LCD_BASE + 0x0110)
30 #define MVEBU_LCD_SPUT_V_H_TOTAL	(MVEBU_LCD_BASE + 0x0114)
31 #define MVEBU_LCD_SPU_V_H_ACTIVE	(MVEBU_LCD_BASE + 0x0118)
32 #define MVEBU_LCD_SPU_H_PORCH		(MVEBU_LCD_BASE + 0x011c)
33 #define MVEBU_LCD_SPU_V_PORCH		(MVEBU_LCD_BASE + 0x0120)
34 #define MVEBU_LCD_SPU_BLANKCOLOR	(MVEBU_LCD_BASE + 0x0124)
35 #define MVEBU_LCD_SPU_ALPHA_COLOR1	(MVEBU_LCD_BASE + 0x0128)
36 #define MVEBU_LCD_SPU_ALPHA_COLOR2	(MVEBU_LCD_BASE + 0x012c)
37 #define MVEBU_LCD_SPU_COLORKEY_Y	(MVEBU_LCD_BASE + 0x0130)
38 #define MVEBU_LCD_SPU_COLORKEY_U	(MVEBU_LCD_BASE + 0x0134)
39 #define MVEBU_LCD_SPU_COLORKEY_V	(MVEBU_LCD_BASE + 0x0138)
40 #define MVEBU_LCD_CFG_RDREG4F		(MVEBU_LCD_BASE + 0x013c)
41 #define MVEBU_LCD_SPU_SPI_RXDATA	(MVEBU_LCD_BASE + 0x0140)
42 #define MVEBU_LCD_SPU_ISA_RXDATA	(MVEBU_LCD_BASE + 0x0144)
43 #define MVEBU_LCD_SPU_DBG_ISA		(MVEBU_LCD_BASE + 0x0148)
44 
45 #define MVEBU_LCD_SPU_HWC_RDDAT		(MVEBU_LCD_BASE + 0x0158)
46 #define MVEBU_LCD_SPU_GAMMA_RDDAT	(MVEBU_LCD_BASE + 0x015c)
47 #define MVEBU_LCD_SPU_PALETTE_RDDAT	(MVEBU_LCD_BASE + 0x0160)
48 #define MVEBU_LCD_SPU_IOPAD_IN		(MVEBU_LCD_BASE + 0x0178)
49 #define MVEBU_LCD_FRAME_COUNT		(MVEBU_LCD_BASE + 0x017c)
50 #define MVEBU_LCD_SPU_DMA_CTRL0		(MVEBU_LCD_BASE + 0x0190)
51 #define MVEBU_LCD_SPU_DMA_CTRL1		(MVEBU_LCD_BASE + 0x0194)
52 #define MVEBU_LCD_SPU_SRAM_CTRL		(MVEBU_LCD_BASE + 0x0198)
53 #define MVEBU_LCD_SPU_SRAM_WRDAT	(MVEBU_LCD_BASE + 0x019c)
54 #define MVEBU_LCD_SPU_SRAM_PARA0	(MVEBU_LCD_BASE + 0x01a0)
55 #define MVEBU_LCD_SPU_SRAM_PARA1	(MVEBU_LCD_BASE + 0x01a4)
56 #define MVEBU_LCD_CFG_SCLK_DIV		(MVEBU_LCD_BASE + 0x01a8)
57 #define MVEBU_LCD_SPU_CONTRAST		(MVEBU_LCD_BASE + 0x01ac)
58 #define MVEBU_LCD_SPU_SATURATION	(MVEBU_LCD_BASE + 0x01b0)
59 #define MVEBU_LCD_SPU_CBSH_HUE		(MVEBU_LCD_BASE + 0x01b4)
60 #define MVEBU_LCD_SPU_DUMB_CTRL		(MVEBU_LCD_BASE + 0x01b8)
61 #define MVEBU_LCD_SPU_IOPAD_CONTROL	(MVEBU_LCD_BASE + 0x01bc)
62 #define MVEBU_LCD_SPU_IRQ_ENA_2		(MVEBU_LCD_BASE + 0x01d8)
63 #define MVEBU_LCD_SPU_IRQ_ISR_2		(MVEBU_LCD_BASE + 0x01dc)
64 #define MVEBU_LCD_SPU_IRQ_ENA		(MVEBU_LCD_BASE + 0x01c0)
65 #define MVEBU_LCD_SPU_IRQ_ISR		(MVEBU_LCD_BASE + 0x01c4)
66 #define MVEBU_LCD_ADLL_CTRL		(MVEBU_LCD_BASE + 0x01c8)
67 #define MVEBU_LCD_CLK_DIS		(MVEBU_LCD_BASE + 0x01cc)
68 #define MVEBU_LCD_VGA_HVSYNC_DELAY	(MVEBU_LCD_BASE + 0x01d4)
69 #define MVEBU_LCD_CLK_CFG_0		(MVEBU_LCD_BASE + 0xf0a0)
70 #define MVEBU_LCD_CLK_CFG_1		(MVEBU_LCD_BASE + 0xf0a4)
71 #define MVEBU_LCD_LVDS_CLK_CFG		(MVEBU_LCD_BASE + 0xf0ac)
72 
73 #define MVEBU_LVDS_PADS_REG		(MVEBU_SYSTEM_REG_BASE + 0xf0)
74 
75 /* Setup Mbus Bridge Windows for LCD */
mvebu_lcd_conf_mbus_registers(void)76 static void mvebu_lcd_conf_mbus_registers(void)
77 {
78 	const struct mbus_dram_target_info *dram;
79 	int i;
80 
81 	dram = mvebu_mbus_dram_info();
82 
83 	/* Disable windows, set size/base/remap to 0  */
84 	for (i = 0; i < 6; i++) {
85 		writel(0, MVEBU_LCD_WIN_CONTROL(i));
86 		writel(0, MVEBU_LCD_WIN_BASE(i));
87 		writel(0, MVEBU_LCD_WIN_REMAP(i));
88 	}
89 
90 	/* Write LCD bridge window registers */
91 	for (i = 0; i < dram->num_cs; i++) {
92 		const struct mbus_dram_window *cs = dram->cs + i;
93 		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
94 		       (dram->mbus_dram_target_id << 4) | 1,
95 		       MVEBU_LCD_WIN_CONTROL(i));
96 
97 		writel(cs->base & 0xffff0000, MVEBU_LCD_WIN_BASE(i));
98 	}
99 }
100 
101 /* Initialize LCD registers */
mvebu_lcd_register_init(struct mvebu_lcd_info * lcd_info)102 int mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info)
103 {
104 	/* Local variable for easier handling */
105 	int x = lcd_info->x_res;
106 	int y = lcd_info->y_res;
107 	u32 val;
108 
109 	/* Setup Mbus Bridge Windows */
110 	mvebu_lcd_conf_mbus_registers();
111 
112 	/*
113 	 * Set LVDS Pads Control Register
114 	 * wr 0 182F0 FFE00000
115 	 */
116 	clrbits_le32(MVEBU_LVDS_PADS_REG, 0x1f << 16);
117 
118 	/*
119 	 * Set the LCD_CFG_GRA_START_ADDR0/1 Registers
120 	 * This is supposed to point to the "physical" memory at memory
121 	 * end (currently 1GB-64MB but also may be 2GB-64MB).
122 	 * See also the Window 0 settings!
123 	 */
124 	writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR0);
125 	writel(lcd_info->fb_base, MVEBU_LCD_CFG_GRA_START_ADDR1);
126 
127 	/*
128 	 * Set the LCD_CFG_GRA_PITCH Register
129 	 * Bits 31-28: Duty Cycle of Backlight. value/16=High (0x8=Mid Setting)
130 	 * Bits 25-16: Backlight divider from 32kHz Clock
131 	 *             (here 16=0x10 for 1kHz)
132 	 * Bits 15-00: Line Length in Bytes
133 	 *             240*2 (for RGB1555)=480=0x1E0
134 	 */
135 	writel(0x80100000 + 2 * x, MVEBU_LCD_CFG_GRA_PITCH);
136 
137 	/*
138 	 * Set the LCD_SPU_GRA_OVSA_HPXL_VLN Register
139 	 * Bits 31-16: Vertical start of graphical overlay on screen
140 	 * Bits 15-00: Horizontal start of graphical overlay on screen
141 	 */
142 	writel(0x00000000, MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN);
143 
144 	/*
145 	 * Set the LCD_SPU_GRA_HPXL_VLN Register
146 	 * Bits 31-16: Vertical size of graphical overlay 320=0x140
147 	 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0
148 	 * Values before zooming
149 	 */
150 	writel((y << 16) | x, MVEBU_LCD_SPU_GRA_HPXL_VLN);
151 
152 	/*
153 	 * Set the LCD_SPU_GZM_HPXL_VLN Register
154 	 * Bits 31-16: Vertical size of graphical overlay 320=0x140
155 	 * Bits 15-00: Horizontal size of graphical overlay 240=0xF0
156 	 * Values after zooming
157 	 */
158 	writel((y << 16) | x, MVEBU_LCD_SPU_GZM_HPXL_VLN);
159 
160 	/*
161 	 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
162 	 * Bits 31-16: Vertical position of HW Cursor 320=0x140
163 	 * Bits 15-00: Horizontal position of HW Cursor 240=0xF0
164 	 */
165 	writel((y << 16) | x, MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN);
166 
167 	/*
168 	 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
169 	 * Bits 31-16: Vertical size of HW Cursor
170 	 * Bits 15-00: Horizontal size of HW Cursor
171 	 */
172 	writel(0x00000000, MVEBU_LCD_SPU_HWC_HPXL_VLN);
173 
174 	/*
175 	 * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register
176 	 * Bits 31-16: Screen total vertical lines:
177 	 *             VSYNC                = 1
178 	 *             Vertical Front Porch = 2
179 	 *             Vertical Lines       = 320
180 	 *             Vertical Back Porch  = 2
181 	 *             SUM                  = 325 = 0x0145
182 	 * Bits 15-00: Screen total horizontal pixels:
183 	 *             HSYNC                  = 1
184 	 *             Horizontal Front Porch = 44
185 	 *             Horizontal Lines       = 240
186 	 *             Horizontal Back Porch  = 2
187 	 *             SUM                    = 287 = 0x011F
188 	 * Note: For the display the backporch is between SYNC and
189 	 *       the start of the pixels.
190 	 *       This is not certain for the Marvell (!?)
191 	 */
192 	val = ((y + lcd_info->y_fp + lcd_info->y_bp + 1) << 16) |
193 		(x + lcd_info->x_fp + lcd_info->x_bp + 1);
194 	writel(val, MVEBU_LCD_SPUT_V_H_TOTAL);
195 
196 	/*
197 	 * Set the LCD_SPU_V_H_ACTIVE Register
198 	 * Bits 31-16: Screen active vertical lines 320=0x140
199 	 * Bits 15-00: Screen active horizontakl pixels 240=0x00F0
200 	 */
201 	writel((y << 16) | x, MVEBU_LCD_SPU_V_H_ACTIVE);
202 
203 	/*
204 	 * Set the LCD_SPU_H_PORCH Register
205 	 * Bits 31-16: Screen horizontal backporch 44=0x2c
206 	 * Bits 15-00: Screen horizontal frontporch 2=0x02
207 	 * Note: The terms "front" and "back" for the Marvell seem to be
208 	 *       exactly opposite to the display.
209 	 */
210 	writel((lcd_info->x_fp << 16) | lcd_info->x_bp, MVEBU_LCD_SPU_H_PORCH);
211 
212 	/*
213 	 * Set the LCD_SPU_V_PORCH Register
214 	 * Bits 31-16: Screen vertical backporch  2=0x02
215 	 * Bits 15-00: Screen vertical frontporch 2=0x02
216 	 * Note: The terms "front" and "back" for the Marvell seem to be exactly
217 	 *       opposite to the display.
218 	 */
219 	writel((lcd_info->y_fp << 16) | lcd_info->y_bp, MVEBU_LCD_SPU_V_PORCH);
220 
221 	/*
222 	 * Set the LCD_SPU_BLANKCOLOR Register
223 	 * This should be black = 0
224 	 * For tests this is magenta=00FF00FF
225 	 */
226 	writel(0x00FF00FF, MVEBU_LCD_SPU_BLANKCOLOR);
227 
228 	/*
229 	 * Registers in the range of 0x0128 to 0x012C are colors for the cursor
230 	 * Registers in the range of 0x0130 to 0x0138 are colors for video
231 	 * color keying
232 	 */
233 
234 	/*
235 	 * Set the LCD_SPU_RDREG4F Register
236 	 * Bits 31-12: Reservd
237 	 * Bit     11: SRAM Wait
238 	 * Bit     10: Smart display fast TX (must be 1)
239 	 * Bit      9: DMA Arbitration Video/Graphics overlay: 0=interleaved
240 	 * Bit      8: FIFO watermark for DMA: 0=disable
241 	 * Bits 07-00: Empty 8B FIFO entries to trigger DMA, default=0x80
242 	 */
243 	writel(0x00000780, MVEBU_LCD_CFG_RDREG4F);
244 
245 	/*
246 	 * Set the LCD_SPU_DMACTRL 0 Register
247 	 * Bit     31: Disable overlay blending 1=disable
248 	 * Bit     30: Gamma correction enable, 0=disable
249 	 * Bit     29: Video Contrast/Saturation/Hue Adjust enable, 0=disable
250 	 * Bit     28: Color palette enable, 0=disable
251 	 * Bit     27: DMA AXI Arbiter, 1=default
252 	 * Bit     26: HW Cursor 1-bit mode
253 	 * Bit     25: HW Cursor or 1- or 2-bit mode
254 	 * Bit     24: HW Cursor enabled, 0=disable
255 	 * Bits 23-20: Graphics Memory Color Format: 0x1=RGB1555
256 	 * Bits 19-16: Video Memory Color Format:    0x1=RGB1555
257 	 * Bit     15: Memory Toggle between frame 0 and 1: 0=disable
258 	 * Bit     14: Graphics horizontal scaling enable: 0=disable
259 	 * Bit     13: Graphics test mode: 0=disable
260 	 * Bit     12: Graphics SWAP R and B: 0=disable
261 	 * Bit     11: Graphics SWAP U and V: 0=disable
262 	 * Bit     10: Graphics SWAP Y and U/V: 0=disable
263 	 * Bit     09: Graphic YUV to RGB Conversion: 0=disable
264 	 * Bit     08: Graphic Transfer: 1=enable
265 	 * Bit     07: Memory Toggle: 0=disable
266 	 * Bit     06: Video horizontal scaling enable: 0=disable
267 	 * Bit     05: Video test mode: 0=disable
268 	 * Bit     04: Video SWAP R and B: 0=disable
269 	 * Bit     03: Video SWAP U and V: 0=disable
270 	 * Bit     02: Video SWAP Y and U/V: 0=disable
271 	 * Bit     01: Video YUV to RGB Conversion: 0=disable
272 	 * Bit     00: Video  Transfer: 0=disable
273 	 */
274 	writel(0x88111100, MVEBU_LCD_SPU_DMA_CTRL0);
275 
276 	/*
277 	 * Set the LCD_SPU_DMA_CTRL1 Register
278 	 * Bit     31: Manual DMA Trigger = 0
279 	 * Bits 30-28: DMA Trigger Source: 0x2 VSYNC
280 	 * Bit     28: VSYNC_INV: 0=Rising Edge, 1=Falling Edge
281 	 * Bits 26-24: Color Key Mode: 0=disable
282 	 * Bit     23: Fill low bits: 0=fill with zeroes
283 	 * Bit     22: Reserved
284 	 * Bit     21: Gated Clock: 0=disable
285 	 * Bit     20: Power Save enable: 0=disable
286 	 * Bits 19-18: Reserved
287 	 * Bits 17-16: Configure Video/Graphic Path: 0x1: Graphic path alpha.
288 	 * Bits 15-08: Configure Alpha: 0x00.
289 	 * Bits 07-00: Reserved.
290 	 */
291 	writel(0x20010000, MVEBU_LCD_SPU_DMA_CTRL1);
292 
293 	/*
294 	 * Set the LCD_SPU_SRAM_CTRL Register
295 	 * Reset to default = 0000C000
296 	 * Bits 15-14: SRAM control: init=0x3, Read=0, Write=2
297 	 * Bits 11-08: SRAM address ID: 0=gamma_yr, 1=gammy_ug, 2=gamma_vb,
298 	 *             3=palette, 15=cursor
299 	 */
300 	writel(0x0000C000, MVEBU_LCD_SPU_SRAM_CTRL);
301 
302 	/*
303 	 * LCD_SPU_SRAM_WRDAT register: 019C
304 	 * LCD_SPU_SRAM_PARA0 register: 01A0
305 	 * LCD_SPU_SRAM_PARA1 register: 01A4 - Cursor control/Power settings
306 	 */
307 	writel(0x00000000, MVEBU_LCD_SPU_SRAM_PARA1);
308 
309 
310 	/* Clock settings in the at 01A8 and in the range F0A0 see below */
311 
312 	/*
313 	 * Set LCD_SPU_CONTRAST
314 	 * Bits 31-16: Brightness sign ext. 8-bit value +255 to -255: default=0
315 	 * Bits 15-00: Contrast sign ext. 8-bit value +255 to -255: default=0
316 	 */
317 	writel(0x00000000, MVEBU_LCD_SPU_CONTRAST);
318 
319 	/*
320 	 * Set LCD_SPU_SATURATION
321 	 * Bits 31-16: Multiplier signed 4.12 fixed point value
322 	 * Bits 15-00: Saturation signed 4.12 fixed point value
323 	 */
324 	writel(0x10001000, MVEBU_LCD_SPU_SATURATION);
325 
326 	/*
327 	 * Set LCD_SPU_HUE
328 	 * Bits 31-16: Sine signed 2.14 fixed point value
329 	 * Bits 15-00: Cosine signed 2.14 fixed point value
330 	 */
331 	writel(0x00000000, MVEBU_LCD_SPU_CBSH_HUE);
332 
333 	/*
334 	 * Set LCD_SPU_DUMB_CTRL
335 	 * Bits 31-28: LCD Type: 3=18 bit RGB | 6=24 bit RGB888
336 	 * Bits 27-12: Reserved
337 	 * Bit     11: LCD DMA Pipeline Enable: 1=Enable
338 	 * Bits 10-09: Reserved
339 	 * Bit      8: LCD GPIO pin (??)
340 	 * Bit      7: Reverse RGB
341 	 * Bit      6: Invert composite blank signal DE/EN (??)
342 	 * Bit      5: Invert composite sync signal
343 	 * Bit      4: Invert Pixel Valid Enable DE/EN (??)
344 	 * Bit      3: Invert VSYNC
345 	 * Bit      2: Invert HSYNC
346 	 * Bit      1: Invert Pixel Clock
347 	 * Bit      0: Enable LCD Panel: 1=Enable
348 	 * Question: Do we have to disable Smart and Dumb LCD
349 	 * and separately enable LVDS?
350 	 */
351 	writel(0x6000080F, MVEBU_LCD_SPU_DUMB_CTRL);
352 
353 	/*
354 	 * Set LCD_SPU_IOPAD_CTRL
355 	 * Bits 31-20: Reserved
356 	 * Bits 19-18: Vertical Interpolation: 0=Disable
357 	 * Bits 17-16: Reserved
358 	 * Bit     15: Graphics Vertical Mirror enable: 0=disable
359 	 * Bit     14: Reserved
360 	 * Bit     13: Video Vertical Mirror enable: 0=disable
361 	 * Bit     12: Reserved
362 	 * Bit     11: Command Vertical Mirror enable: 0=disable
363 	 * Bit     10: Reserved
364 	 * Bits 09-08: YUV to RGB Color space conversion: 0 (Not used)
365 	 * Bits 07-04: AXI Bus Master: 0x4: no crossing of 4k boundary,
366 	 *             128 Bytes burst
367 	 * Bits 03-00: LCD pins: ??? 0=24-bit Dump panel ??
368 	 */
369 	writel(0x000000C0, MVEBU_LCD_SPU_IOPAD_CONTROL);
370 
371 	/*
372 	 * Set SUP_IRQ_ENA_2: Disable all interrupts
373 	 */
374 	writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA_2);
375 
376 	/*
377 	 * Set SUP_IRQ_ENA: Disable all interrupts.
378 	 */
379 	writel(0x00000000, MVEBU_LCD_SPU_IRQ_ENA);
380 
381 	/*
382 	 * Set up ADDL Control Register
383 	 * Bits 31-29: 0x0 = Fastest Delay Line (default)
384 	 *             0x3 = Slowest Delay Line (default)
385 	 * Bit     28: Calibration done status.
386 	 * Bit     27: Reserved
387 	 * Bit     26: Set Pixel Clock to ADDL output
388 	 * Bit     25: Reduce CAL Enable
389 	 * Bits 24-22: Manual calibration value.
390 	 * Bit     21: Manual calibration enable.
391 	 * Bit     20: Restart Auto Cal
392 	 * Bits 19-16: Calibration Threshold voltage, default= 0x2
393 	 * Bite 15-14: Reserved
394 	 * Bits 13-11: Divisor for ADDL Clock: 0x1=/2, 0x3=/8, 0x5=/16
395 	 * Bit     10: Power Down ADDL module, default = 1!
396 	 * Bits 09-08: Test point configuration: 0x2=Bias, 0x3=High-z
397 	 * Bit     07: Reset ADDL
398 	 * Bit     06: Invert ADLL Clock
399 	 * Bits 05-00: Delay taps, 0x3F=Half Cycle, 0x00=No delay
400 	 * Note: ADLL is used for a VGA interface with DAC - not used here
401 	 */
402 	writel(0x00000000, MVEBU_LCD_ADLL_CTRL);
403 
404 	/*
405 	 * Set the LCD_CLK_DIS Register:
406 	 * Bits 3 and 4 must be 1
407 	 */
408 	writel(0x00000018, MVEBU_LCD_CLK_DIS);
409 
410 	/*
411 	 * Set the LCD_VGA_HSYNC/VSYNC Delay Register:
412 	 * Bits 03-00: Sets the delay for the HSYNC and VSYNC signals
413 	 */
414 	writel(0x00000000, MVEBU_LCD_VGA_HVSYNC_DELAY);
415 
416 	/*
417 	 * Clock registers
418 	 * See page 475 in the functional spec.
419 	 */
420 
421 	/* Step 1 and 2: Disable the PLL */
422 
423 	/*
424 	 * Disable PLL, see "LCD Clock Configuration 1 Register" below
425 	 */
426 	writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1);
427 
428 	/*
429 	 * Powerdown, see "LCD Clock Configuration 0 Register" below
430 	 */
431 	writel(0x94000174, MVEBU_LCD_CLK_CFG_0);
432 
433 	/*
434 	 * Set the LCD_CFG_SCLK_DIV Register
435 	 * This is set fix to 0x40000001 for the LVDS output:
436 	 * Bits 31-30: SCLCK Source: 0=AXIBus, 1=AHBus, 2=PLLDivider0
437 	 * Bits 15-01: Clock Divider: Bypass for LVDS=0x0001
438 	 * See page 475 in section 28.5.
439 	 */
440 	writel(0x80000001, MVEBU_LCD_CFG_SCLK_DIV);
441 
442 	/*
443 	 * Set the LCD Clock Configuration 0 Register:
444 	 * Bit     31: Powerdown: 0=Power up
445 	 * Bits 30-29: Reserved
446 	 * Bits 28-26: PLL_KDIV: This encodes K
447 	 *             K=16 => 0x5
448 	 * Bits 25-17: PLL_MDIV: This is M-1:
449 	 *             M=1 => 0x0
450 	 * Bits 16-13: VCO band: 0x1 for 700-920MHz
451 	 * Bits 12-04: PLL_NDIV: This is N-1 and corresponds to R1_CTRL!
452 	 *             N=28=0x1C => 0x1B
453 	 * Bits 03-00: R1_CTRL (for N=28 => 0x4)
454 	 */
455 	writel(0x940021B4, MVEBU_LCD_CLK_CFG_0);
456 
457 	/*
458 	 * Set the LCD Clock Configuration 1 Register:
459 	 * Bits 31-19: Reserved
460 	 * Bit     18: Select PLL: Core PLL, 1=Dedicated PPL
461 	 * Bit     17: Clock Output Enable: 0=disable, 1=enable
462 	 * Bit     16: Select RefClk: 0=RefClk (25MHz), 1=External
463 	 * Bit     15: Half-Div, Device Clock by DIV+0.5*Half-Dev
464 	 * Bits 14-13: Reserved
465 	 * Bits 12-00: PLL Full Divider [Note: Assumed to be the Post-Divider
466 	 *             M' for LVDS=7!]
467 	 */
468 	writel(0x8FF40007, MVEBU_LCD_CLK_CFG_1);
469 
470 	/*
471 	 * Set the LVDS Clock Configuration Register:
472 	 * Bit     31: Clock Gating for the input clock to the LVDS
473 	 * Bit     30: LVDS Serializer enable: 1=Enabled
474 	 * Bits 29-11: Reserved
475 	 * Bit  11-08: LVDS Clock delay: 0x02 (default): by 2 pixel clock/7
476 	 * Bits 07-02: Reserved
477 	 * Bit     01: 24bbp Option: 0=Option_1,1=Option2
478 	 * Bit     00: 1=24bbp Panel: 0=18bpp Panel
479 	 * Note: Bits 0 and must be verified with the help of the
480 	 *       Interface/display
481 	 */
482 	writel(0xC0000201, MVEBU_LCD_LVDS_CLK_CFG);
483 
484 	/*
485 	 * Power up PLL (Clock Config 0)
486 	 */
487 	writel(0x140021B4, MVEBU_LCD_CLK_CFG_0);
488 
489 	/* wait 10 ms */
490 	mdelay(10);
491 
492 	/*
493 	 * Enable PLL (Clock Config 1)
494 	 */
495 	writel(0x8FF60007, MVEBU_LCD_CLK_CFG_1);
496 
497 	return 0;
498 }
499 
board_video_init(void)500 int __weak board_video_init(void)
501 {
502 	return -1;
503 }
504 
video_hw_init(void)505 void *video_hw_init(void)
506 {
507 	static GraphicDevice mvebufb;
508 	GraphicDevice *pGD = &mvebufb;
509 	u32 val;
510 
511 	/*
512 	 * The board code needs to call mvebu_lcd_register_init()
513 	 * in its board_video_init() implementation, with the board
514 	 * specific parameters for its LCD.
515 	 */
516 	if (board_video_init() || !readl(MVEBU_LCD_CFG_GRA_START_ADDR0))
517 		return NULL;
518 
519 	/* Provide the necessary values for the U-Boot video IF */
520 	val = readl(MVEBU_LCD_SPU_V_H_ACTIVE);
521 	pGD->winSizeY = val >> 16;
522 	pGD->winSizeX = val & 0x0000ffff;
523 	pGD->gdfBytesPP = 2;
524 	pGD->gdfIndex = GDF_15BIT_555RGB;
525 	pGD->frameAdrs = readl(MVEBU_LCD_CFG_GRA_START_ADDR0);
526 
527 	debug("LCD: buffer at 0x%08x resolution %dx%d\n", pGD->frameAdrs,
528 	      pGD->winSizeX, pGD->winSizeY);
529 
530 	return pGD;
531 }
532