1 /* 2 * Stack-less Just-In-Time compiler 3 * 4 * Copyright Zoltan Herczeg (hzmester@freemail.hu). All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without modification, are 7 * permitted provided that the following conditions are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright notice, this list of 10 * conditions and the following disclaimer. 11 * 12 * 2. Redistributions in binary form must reproduce the above copyright notice, this list 13 * of conditions and the following disclaimer in the documentation and/or other materials 14 * provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY 17 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 19 * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 21 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 22 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 24 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #ifndef _SLJIT_CONFIG_INTERNAL_H_ 28 #define _SLJIT_CONFIG_INTERNAL_H_ 29 30 /* 31 SLJIT defines the following architecture dependent types and macros: 32 33 Types: 34 sljit_s8, sljit_u8 : signed and unsigned 8 bit integer type 35 sljit_s16, sljit_u16 : signed and unsigned 16 bit integer type 36 sljit_s32, sljit_u32 : signed and unsigned 32 bit integer type 37 sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer 38 sljit_p : unsgined pointer value (usually the same as sljit_uw, but 39 some 64 bit ABIs may use 32 bit pointers) 40 sljit_f32 : 32 bit single precision floating point value 41 sljit_f64 : 64 bit double precision floating point value 42 43 Macros for feature detection (boolean): 44 SLJIT_32BIT_ARCHITECTURE : 32 bit architecture 45 SLJIT_64BIT_ARCHITECTURE : 64 bit architecture 46 SLJIT_LITTLE_ENDIAN : little endian architecture 47 SLJIT_BIG_ENDIAN : big endian architecture 48 SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!) 49 SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information 50 51 Constants: 52 SLJIT_NUMBER_OF_REGISTERS : number of available registers 53 SLJIT_NUMBER_OF_SCRATCH_REGISTERS : number of available scratch registers 54 SLJIT_NUMBER_OF_SAVED_REGISTERS : number of available saved registers 55 SLJIT_NUMBER_OF_FLOAT_REGISTERS : number of available floating point registers 56 SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS : number of available floating point scratch registers 57 SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS : number of available floating point saved registers 58 SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index 59 SLJIT_F32_SHIFT : the shift required to apply when accessing 60 a single precision floating point array by index 61 SLJIT_F64_SHIFT : the shift required to apply when accessing 62 a double precision floating point array by index 63 SLJIT_PREF_SHIFT_REG : x86 systems prefers ecx for shifting by register 64 the scratch register index of ecx is stored in this variable 65 SLJIT_LOCALS_OFFSET : local space starting offset (SLJIT_SP + SLJIT_LOCALS_OFFSET) 66 SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address 67 68 Other macros: 69 SLJIT_FUNC : calling convention attribute for both calling JIT from C and C calling back from JIT 70 SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper) 71 */ 72 73 /*****************/ 74 /* Sanity check. */ 75 /*****************/ 76 77 #if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 78 || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 79 || (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 80 || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 81 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 82 || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 83 || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 84 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 85 || (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 86 || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 87 || (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 88 || (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 89 || (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 90 || (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)) 91 #error "An architecture must be selected" 92 #endif 93 94 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 95 + (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 96 + (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \ 97 + (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 98 + (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 99 + (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 100 + (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 101 + (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 102 + (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) \ 103 + (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 104 + (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 105 + (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \ 106 + (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \ 107 + (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2 108 #error "Multiple architectures are selected" 109 #endif 110 111 /********************************************************/ 112 /* Automatic CPU detection (requires compiler support). */ 113 /********************************************************/ 114 115 #if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) 116 117 #ifndef _WIN32 118 119 #if defined(__i386__) || defined(__i386) 120 #define SLJIT_CONFIG_X86_32 1 121 #elif defined(__x86_64__) 122 #define SLJIT_CONFIG_X86_64 1 123 #elif defined(__arm__) || defined(__ARM__) 124 #ifdef __thumb2__ 125 #define SLJIT_CONFIG_ARM_THUMB2 1 126 #elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__) 127 #define SLJIT_CONFIG_ARM_V7 1 128 #else 129 #define SLJIT_CONFIG_ARM_V5 1 130 #endif 131 #elif defined (__aarch64__) 132 #define SLJIT_CONFIG_ARM_64 1 133 #elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__)) 134 #define SLJIT_CONFIG_PPC_64 1 135 #elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER) 136 #define SLJIT_CONFIG_PPC_32 1 137 #elif defined(__mips__) && !defined(_LP64) 138 #define SLJIT_CONFIG_MIPS_32 1 139 #elif defined(__mips64) 140 #define SLJIT_CONFIG_MIPS_64 1 141 #elif defined(__sparc__) || defined(__sparc) 142 #define SLJIT_CONFIG_SPARC_32 1 143 #elif defined(__tilegx__) 144 #define SLJIT_CONFIG_TILEGX 1 145 #else 146 /* Unsupported architecture */ 147 #define SLJIT_CONFIG_UNSUPPORTED 1 148 #endif 149 150 #else /* _WIN32 */ 151 152 #if defined(_M_X64) || defined(__x86_64__) 153 #define SLJIT_CONFIG_X86_64 1 154 #elif (defined(_M_ARM) && _M_ARM >= 7 && defined(_M_ARMT)) || defined(__thumb2__) 155 #define SLJIT_CONFIG_ARM_THUMB2 1 156 #elif (defined(_M_ARM) && _M_ARM >= 7) 157 #define SLJIT_CONFIG_ARM_V7 1 158 #elif defined(_ARM_) 159 #define SLJIT_CONFIG_ARM_V5 1 160 #elif defined(_M_ARM64) || defined(__aarch64__) 161 #define SLJIT_CONFIG_ARM_64 1 162 #else 163 #define SLJIT_CONFIG_X86_32 1 164 #endif 165 166 #endif /* !_WIN32 */ 167 #endif /* SLJIT_CONFIG_AUTO */ 168 169 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 170 #undef SLJIT_EXECUTABLE_ALLOCATOR 171 #endif 172 173 /******************************/ 174 /* CPU family type detection. */ 175 /******************************/ 176 177 #if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 178 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 179 #define SLJIT_CONFIG_ARM_32 1 180 #endif 181 182 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 183 #define SLJIT_CONFIG_X86 1 184 #elif (defined SLJIT_CONFIG_ARM_32 && SLJIT_CONFIG_ARM_32) || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 185 #define SLJIT_CONFIG_ARM 1 186 #elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 187 #define SLJIT_CONFIG_PPC 1 188 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 189 #define SLJIT_CONFIG_MIPS 1 190 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) || (defined SLJIT_CONFIG_SPARC_64 && SLJIT_CONFIG_SPARC_64) 191 #define SLJIT_CONFIG_SPARC 1 192 #endif 193 194 /**********************************/ 195 /* External function definitions. */ 196 /**********************************/ 197 198 /* General macros: 199 Note: SLJIT is designed to be independent from them as possible. 200 201 In release mode (SLJIT_DEBUG is not defined) only the following 202 external functions are needed: 203 */ 204 205 #ifndef SLJIT_MALLOC 206 #define SLJIT_MALLOC(size, allocator_data) malloc(size) 207 #endif 208 209 #ifndef SLJIT_FREE 210 #define SLJIT_FREE(ptr, allocator_data) free(ptr) 211 #endif 212 213 #ifndef SLJIT_MEMCPY 214 #define SLJIT_MEMCPY(dest, src, len) memcpy(dest, src, len) 215 #endif 216 217 #ifndef SLJIT_ZEROMEM 218 #define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len) 219 #endif 220 221 /***************************/ 222 /* Compiler helper macros. */ 223 /***************************/ 224 225 #if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) 226 227 #if defined(__GNUC__) && (__GNUC__ >= 3) 228 #define SLJIT_LIKELY(x) __builtin_expect((x), 1) 229 #define SLJIT_UNLIKELY(x) __builtin_expect((x), 0) 230 #else 231 #define SLJIT_LIKELY(x) (x) 232 #define SLJIT_UNLIKELY(x) (x) 233 #endif 234 235 #endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */ 236 237 #ifndef SLJIT_INLINE 238 /* Inline functions. Some old compilers do not support them. */ 239 #if defined(__SUNPRO_C) && __SUNPRO_C <= 0x510 240 #define SLJIT_INLINE 241 #else 242 #define SLJIT_INLINE __inline 243 #endif 244 #endif /* !SLJIT_INLINE */ 245 246 #ifndef SLJIT_NOINLINE 247 /* Not inline functions. */ 248 #if defined(__GNUC__) 249 #define SLJIT_NOINLINE __attribute__ ((noinline)) 250 #else 251 #define SLJIT_NOINLINE 252 #endif 253 #endif /* !SLJIT_INLINE */ 254 255 #ifndef SLJIT_UNUSED_ARG 256 /* Unused arguments. */ 257 #define SLJIT_UNUSED_ARG(arg) (void)arg 258 #endif 259 260 /*********************************/ 261 /* Type of public API functions. */ 262 /*********************************/ 263 264 #if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) 265 /* Static ABI functions. For all-in-one programs. */ 266 267 #if defined(__GNUC__) 268 /* Disable unused warnings in gcc. */ 269 #define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused)) 270 #else 271 #define SLJIT_API_FUNC_ATTRIBUTE static 272 #endif 273 274 #else 275 #define SLJIT_API_FUNC_ATTRIBUTE 276 #endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */ 277 278 /****************************/ 279 /* Instruction cache flush. */ 280 /****************************/ 281 282 #if (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) 283 #if __has_builtin(__builtin___clear_cache) 284 285 #define SLJIT_CACHE_FLUSH(from, to) \ 286 __builtin___clear_cache((char*)from, (char*)to) 287 288 #endif /* __has_builtin(__builtin___clear_cache) */ 289 #endif /* (!defined SLJIT_CACHE_FLUSH && defined __has_builtin) */ 290 291 #ifndef SLJIT_CACHE_FLUSH 292 293 #if (defined SLJIT_CONFIG_X86 && SLJIT_CONFIG_X86) 294 295 /* Not required to implement on archs with unified caches. */ 296 #define SLJIT_CACHE_FLUSH(from, to) 297 298 #elif defined __APPLE__ 299 300 /* Supported by all macs since Mac OS 10.5. 301 However, it does not work on non-jailbroken iOS devices, 302 although the compilation is successful. */ 303 304 #define SLJIT_CACHE_FLUSH(from, to) \ 305 sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from)) 306 307 #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 308 309 /* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */ 310 #define SLJIT_CACHE_FLUSH(from, to) \ 311 ppc_cache_flush((from), (to)) 312 #define SLJIT_CACHE_FLUSH_OWN_IMPL 1 313 314 #elif (defined(__GNUC__) && (__GNUC__ >= 5 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 3))) 315 316 #define SLJIT_CACHE_FLUSH(from, to) \ 317 __builtin___clear_cache((char*)from, (char*)to) 318 319 #elif defined __ANDROID__ 320 321 /* Android lacks __clear_cache; instead, cacheflush should be used. */ 322 323 #define SLJIT_CACHE_FLUSH(from, to) \ 324 cacheflush((long)(from), (long)(to), 0) 325 326 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 327 328 /* The __clear_cache() implementation of GCC is a dummy function on Sparc. */ 329 #define SLJIT_CACHE_FLUSH(from, to) \ 330 sparc_cache_flush((from), (to)) 331 #define SLJIT_CACHE_FLUSH_OWN_IMPL 1 332 333 #elif defined _WIN32 334 335 #define SLJIT_CACHE_FLUSH(from, to) \ 336 FlushInstructionCache(GetCurrentProcess(), (char*)(from), (char*)(to) - (char*)(from)) 337 338 #else 339 340 /* Calls __ARM_NR_cacheflush on ARM-Linux. */ 341 #define SLJIT_CACHE_FLUSH(from, to) \ 342 __clear_cache((char*)(from), (char*)(to)) 343 344 #endif 345 346 #endif /* !SLJIT_CACHE_FLUSH */ 347 348 /******************************************************/ 349 /* Integer and floating point type definitions. */ 350 /******************************************************/ 351 352 /* 8 bit byte type. */ 353 typedef unsigned char sljit_u8; 354 typedef signed char sljit_s8; 355 356 /* 16 bit half-word type. */ 357 typedef unsigned short int sljit_u16; 358 typedef signed short int sljit_s16; 359 360 /* 32 bit integer type. */ 361 typedef unsigned int sljit_u32; 362 typedef signed int sljit_s32; 363 364 /* Machine word type. Enough for storing a pointer. 365 32 bit for 32 bit machines. 366 64 bit for 64 bit machines. */ 367 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 368 /* Just to have something. */ 369 #define SLJIT_WORD_SHIFT 0 370 typedef unsigned long int sljit_uw; 371 typedef long int sljit_sw; 372 #elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 373 && !(defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 374 && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \ 375 && !(defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) \ 376 && !(defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) 377 #define SLJIT_32BIT_ARCHITECTURE 1 378 #define SLJIT_WORD_SHIFT 2 379 typedef unsigned int sljit_uw; 380 typedef int sljit_sw; 381 #else 382 #define SLJIT_64BIT_ARCHITECTURE 1 383 #define SLJIT_WORD_SHIFT 3 384 #ifdef _WIN32 385 #ifdef __GNUC__ 386 /* These types do not require windows.h */ 387 typedef unsigned long long sljit_uw; 388 typedef long long sljit_sw; 389 #else 390 typedef unsigned __int64 sljit_uw; 391 typedef __int64 sljit_sw; 392 #endif 393 #else /* !_WIN32 */ 394 typedef unsigned long int sljit_uw; 395 typedef long int sljit_sw; 396 #endif /* _WIN32 */ 397 #endif 398 399 typedef sljit_uw sljit_p; 400 401 /* Floating point types. */ 402 typedef float sljit_f32; 403 typedef double sljit_f64; 404 405 /* Shift for pointer sized data. */ 406 #define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT 407 408 /* Shift for double precision sized data. */ 409 #define SLJIT_F32_SHIFT 2 410 #define SLJIT_F64_SHIFT 3 411 412 #ifndef SLJIT_W 413 414 /* Defining long constants. */ 415 #if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 416 #define SLJIT_W(w) (w##l) 417 #elif (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE) 418 #define SLJIT_W(w) (w##ll) 419 #else 420 #define SLJIT_W(w) (w) 421 #endif 422 423 #endif /* !SLJIT_W */ 424 425 /*************************/ 426 /* Endianness detection. */ 427 /*************************/ 428 429 #if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) 430 431 /* These macros are mostly useful for the applications. */ 432 #if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 433 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 434 435 #ifdef __LITTLE_ENDIAN__ 436 #define SLJIT_LITTLE_ENDIAN 1 437 #else 438 #define SLJIT_BIG_ENDIAN 1 439 #endif 440 441 #elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \ 442 || (defined SLJIT_CONFIG_MIPS_64 && SLJIT_CONFIG_MIPS_64) 443 444 #ifdef __MIPSEL__ 445 #define SLJIT_LITTLE_ENDIAN 1 446 #else 447 #define SLJIT_BIG_ENDIAN 1 448 #endif 449 450 #elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 451 452 #define SLJIT_BIG_ENDIAN 1 453 454 #else 455 #define SLJIT_LITTLE_ENDIAN 1 456 #endif 457 458 #endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */ 459 460 /* Sanity check. */ 461 #if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 462 #error "Exactly one endianness must be selected" 463 #endif 464 465 #if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN) 466 #error "Exactly one endianness must be selected" 467 #endif 468 469 #ifndef SLJIT_UNALIGNED 470 471 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \ 472 || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \ 473 || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \ 474 || (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \ 475 || (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) \ 476 || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \ 477 || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) 478 #define SLJIT_UNALIGNED 1 479 #endif 480 481 #endif /* !SLJIT_UNALIGNED */ 482 483 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 484 /* Auto detect SSE2 support using CPUID. 485 On 64 bit x86 cpus, sse2 must be present. */ 486 #define SLJIT_DETECT_SSE2 1 487 #endif 488 489 /*****************************************************************************************/ 490 /* Calling convention of functions generated by SLJIT or called from the generated code. */ 491 /*****************************************************************************************/ 492 493 #ifndef SLJIT_FUNC 494 495 #if (defined SLJIT_USE_CDECL_CALLING_CONVENTION && SLJIT_USE_CDECL_CALLING_CONVENTION) 496 497 /* Force cdecl. */ 498 #define SLJIT_FUNC 499 500 #elif (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 501 502 #if defined(__GNUC__) && !defined(__APPLE__) 503 504 #define SLJIT_FUNC __attribute__ ((fastcall)) 505 #define SLJIT_X86_32_FASTCALL 1 506 507 #elif defined(_MSC_VER) 508 509 #define SLJIT_FUNC __fastcall 510 #define SLJIT_X86_32_FASTCALL 1 511 512 #elif defined(__BORLANDC__) 513 514 #define SLJIT_FUNC __msfastcall 515 #define SLJIT_X86_32_FASTCALL 1 516 517 #else /* Unknown compiler. */ 518 519 /* The cdecl attribute is the default. */ 520 #define SLJIT_FUNC 521 522 #endif 523 524 #else /* Non x86-32 architectures. */ 525 526 #define SLJIT_FUNC 527 528 #endif /* SLJIT_CONFIG_X86_32 */ 529 530 #endif /* !SLJIT_FUNC */ 531 532 #ifndef SLJIT_INDIRECT_CALL 533 #if ((defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) && (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN)) \ 534 || ((defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) && defined _AIX) 535 /* It seems certain ppc compilers use an indirect addressing for functions 536 which makes things complicated. */ 537 #define SLJIT_INDIRECT_CALL 1 538 #endif 539 #endif /* SLJIT_INDIRECT_CALL */ 540 541 /* The offset which needs to be substracted from the return address to 542 determine the next executed instruction after return. */ 543 #ifndef SLJIT_RETURN_ADDRESS_OFFSET 544 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 545 #define SLJIT_RETURN_ADDRESS_OFFSET 8 546 #else 547 #define SLJIT_RETURN_ADDRESS_OFFSET 0 548 #endif 549 #endif /* SLJIT_RETURN_ADDRESS_OFFSET */ 550 551 /***************************************************/ 552 /* Functions of the built-in executable allocator. */ 553 /***************************************************/ 554 555 #if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR) 556 SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size); 557 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr); 558 SLJIT_API_FUNC_ATTRIBUTE void sljit_free_unused_memory_exec(void); 559 #define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size) 560 #define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr) 561 562 #if (defined SLJIT_PROT_EXECUTABLE_ALLOCATOR && SLJIT_PROT_EXECUTABLE_ALLOCATOR) 563 SLJIT_API_FUNC_ATTRIBUTE sljit_sw sljit_exec_offset(void* ptr); 564 #define SLJIT_EXEC_OFFSET(ptr) sljit_exec_offset(ptr) 565 #else 566 #define SLJIT_EXEC_OFFSET(ptr) 0 567 #endif 568 569 #endif 570 571 /**********************************************/ 572 /* Registers and locals offset determination. */ 573 /**********************************************/ 574 575 #if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) 576 577 #define SLJIT_NUMBER_OF_REGISTERS 12 578 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 9 579 #define SLJIT_LOCALS_OFFSET_BASE (compiler->locals_offset) 580 #define SLJIT_PREF_SHIFT_REG SLJIT_R2 581 582 #elif (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) 583 584 #define SLJIT_NUMBER_OF_REGISTERS 13 585 #ifndef _WIN64 586 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 6 587 #define SLJIT_LOCALS_OFFSET_BASE 0 588 #else /* _WIN64 */ 589 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 590 #define SLJIT_LOCALS_OFFSET_BASE (compiler->locals_offset) 591 #endif /* !_WIN64 */ 592 #define SLJIT_PREF_SHIFT_REG SLJIT_R3 593 594 #elif (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) 595 596 #define SLJIT_NUMBER_OF_REGISTERS 12 597 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 598 #define SLJIT_LOCALS_OFFSET_BASE 0 599 600 #elif (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) 601 602 #define SLJIT_NUMBER_OF_REGISTERS 12 603 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 604 #define SLJIT_LOCALS_OFFSET_BASE 0 605 606 #elif (defined SLJIT_CONFIG_ARM_64 && SLJIT_CONFIG_ARM_64) 607 608 #define SLJIT_NUMBER_OF_REGISTERS 26 609 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 10 610 #define SLJIT_LOCALS_OFFSET_BASE 0 611 612 #elif (defined SLJIT_CONFIG_PPC && SLJIT_CONFIG_PPC) 613 614 #define SLJIT_NUMBER_OF_REGISTERS 23 615 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 17 616 #if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined _AIX) 617 #define SLJIT_LOCALS_OFFSET_BASE ((6 + 8) * sizeof(sljit_sw)) 618 #elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) 619 /* Add +1 for double alignment. */ 620 #define SLJIT_LOCALS_OFFSET_BASE ((3 + 1) * sizeof(sljit_sw)) 621 #else 622 #define SLJIT_LOCALS_OFFSET_BASE (3 * sizeof(sljit_sw)) 623 #endif /* SLJIT_CONFIG_PPC_64 || _AIX */ 624 625 #elif (defined SLJIT_CONFIG_MIPS && SLJIT_CONFIG_MIPS) 626 627 #define SLJIT_NUMBER_OF_REGISTERS 21 628 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 8 629 #if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) 630 #define SLJIT_LOCALS_OFFSET_BASE (4 * sizeof(sljit_sw)) 631 #else 632 #define SLJIT_LOCALS_OFFSET_BASE 0 633 #endif 634 635 #elif (defined SLJIT_CONFIG_SPARC && SLJIT_CONFIG_SPARC) 636 637 #define SLJIT_NUMBER_OF_REGISTERS 18 638 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 14 639 #if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) 640 /* saved registers (16), return struct pointer (1), space for 6 argument words (1), 641 4th double arg (2), double alignment (1). */ 642 #define SLJIT_LOCALS_OFFSET_BASE ((16 + 1 + 6 + 2 + 1) * sizeof(sljit_sw)) 643 #endif 644 645 #elif (defined SLJIT_CONFIG_TILEGX && SLJIT_CONFIG_TILEGX) 646 647 #define SLJIT_NUMBER_OF_REGISTERS 10 648 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 5 649 #define SLJIT_LOCALS_OFFSET_BASE 0 650 651 #elif (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) 652 653 #define SLJIT_NUMBER_OF_REGISTERS 0 654 #define SLJIT_NUMBER_OF_SAVED_REGISTERS 0 655 #define SLJIT_LOCALS_OFFSET_BASE 0 656 657 #endif 658 659 #define SLJIT_LOCALS_OFFSET (SLJIT_LOCALS_OFFSET_BASE) 660 661 #define SLJIT_NUMBER_OF_SCRATCH_REGISTERS \ 662 (SLJIT_NUMBER_OF_REGISTERS - SLJIT_NUMBER_OF_SAVED_REGISTERS) 663 664 #define SLJIT_NUMBER_OF_FLOAT_REGISTERS 6 665 #if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && (defined _WIN64) 666 #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 1 667 #else 668 #define SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS 0 669 #endif 670 671 #define SLJIT_NUMBER_OF_SCRATCH_FLOAT_REGISTERS \ 672 (SLJIT_NUMBER_OF_FLOAT_REGISTERS - SLJIT_NUMBER_OF_SAVED_FLOAT_REGISTERS) 673 674 /*************************************/ 675 /* Debug and verbose related macros. */ 676 /*************************************/ 677 678 #if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) 679 #include <stdio.h> 680 #endif 681 682 #if (defined SLJIT_DEBUG && SLJIT_DEBUG) 683 684 #if !defined(SLJIT_ASSERT) || !defined(SLJIT_UNREACHABLE) 685 686 /* SLJIT_HALT_PROCESS must halt the process. */ 687 #ifndef SLJIT_HALT_PROCESS 688 #include <stdlib.h> 689 690 #define SLJIT_HALT_PROCESS() \ 691 abort(); 692 #endif /* !SLJIT_HALT_PROCESS */ 693 694 #include <stdio.h> 695 696 #endif /* !SLJIT_ASSERT || !SLJIT_UNREACHABLE */ 697 698 /* Feel free to redefine these two macros. */ 699 #ifndef SLJIT_ASSERT 700 701 #define SLJIT_ASSERT(x) \ 702 do { \ 703 if (SLJIT_UNLIKELY(!(x))) { \ 704 printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \ 705 SLJIT_HALT_PROCESS(); \ 706 } \ 707 } while (0) 708 709 #endif /* !SLJIT_ASSERT */ 710 711 #ifndef SLJIT_UNREACHABLE 712 713 #define SLJIT_UNREACHABLE() \ 714 do { \ 715 printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \ 716 SLJIT_HALT_PROCESS(); \ 717 } while (0) 718 719 #endif /* !SLJIT_UNREACHABLE */ 720 721 #else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 722 723 /* Forcing empty, but valid statements. */ 724 #undef SLJIT_ASSERT 725 #undef SLJIT_UNREACHABLE 726 727 #define SLJIT_ASSERT(x) \ 728 do { } while (0) 729 #define SLJIT_UNREACHABLE() \ 730 do { } while (0) 731 732 #endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */ 733 734 #ifndef SLJIT_COMPILE_ASSERT 735 736 #define SLJIT_COMPILE_ASSERT(x, description) \ 737 switch(0) { case 0: case ((x) ? 1 : 0): break; } 738 739 #endif /* !SLJIT_COMPILE_ASSERT */ 740 741 #endif 742