| /external/u-boot/arch/arm/mach-rockchip/rk3288/ |
| D | Kconfig | 38 HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet, It
56 HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet, It
82 1 micro USB OTG port, HDMI, VGA, micro-SD card, audio, WiFi, Gigabit
108 HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet, It
|
| /external/u-boot/arch/x86/cpu/queensbay/ |
| D | Kconfig | 63 show in the PCI configuration space as a VGA disaplay controller.
65 card's VGA BIOS and use that card for the graphics console.
|
| /external/u-boot/doc/ |
| D | README.vxworks | 88 VGA text mode driver. The other one is the EFI console bitmapped graphics mode
89 driver. To make these drivers function, U-Boot needs to load and run the VGA
92 - If the kernel is configured with 80x25 VGA text mode driver,
|
| D | README.video | 47 vga: Selects video output over the VGA connector.
|
| D | README.x86 | 273 Obtain the VGA RAM (Vga.dat at the time of writing) and put it into the same
348 Note the FSP package for Braswell does not ship a traditional legacy VGA BIOS
467 show QEMU's VGA console window. Note this will disable QEMU's serial output.
895 device on your board, SeaBIOS needs to be patched manually to get its VGA ROM
896 loaded and run by SeaBIOS. SeaBIOS locates VGA ROM via the PCI expansion ROM
897 register, but IGD device does not have its VGA ROM mapped by this register.
898 Its VGA ROM is packaged as part of u-boot.rom at a configurable flash address
915 Note: the patch above expects IGD device is at PCI b.d.f 0.2.0 and its VGA ROM
|
| /external/u-boot/arch/arm/mach-aspeed/ast2500/ |
| D | Kconfig | 11 4 Serial ports, 4 USB ports, VGA port, PCIe, SD card slot,
|
| /external/python/cpython2/Lib/plat-irix5/ |
| D | GET.py | 17 VGA = 4 variable
|
| /external/python/cpython2/Lib/plat-irix6/ |
| D | GET.py | 17 VGA = 4 variable
|
| /external/u-boot/board/advantech/ |
| D | Kconfig | 20 HDMI/DisplayPort/DVI, LVDS, VGA
|
| /external/u-boot/board/intel/ |
| D | Kconfig | 16 4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC,
34 peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI.
|
| /external/u-boot/arch/x86/ |
| D | Kconfig | 534 bool "Add a VGA BIOS image"
536 Select this option if you have a VGA BIOS image that you would
540 string "VGA BIOS image filename"
544 The filename of the VGA BIOS image in the board directory.
547 hex "VGA BIOS image location"
551 The location of VGA BIOS image in the SPI flash. For example, base
672 bool "Re-run VGA option ROMs on S3 resume"
675 Execute VGA option ROMs in U-Boot when resuming from S3. Normally
679 graphics console won't work without VGA options ROMs. Set it to N
|
| /external/autotest/client/site_tests/video_WebRtcCamera/ |
| D | control | 23 This test will test VGA and 720p (if supported by the device) and check
|
| /external/autotest/client/site_tests/video_VEAPerf/ |
| D | control.cfm | 28 #VGA
|
| /external/u-boot/arch/arm/mach-sunxi/ |
| D | Kconfig | 707 bool "Enable graphical uboot console on HDMI, LCD or VGA"
719 or VGA output found on most sunxi devices. See doc/README.video for
730 bool "VGA output support"
734 Say Y here to add support for outputting video over VGA.
737 bool "VGA via LCD controller support"
742 LCD interface driving a VGA connector, such as found on the
746 bool "Force sync active high for VGA via LCD controller support"
760 Set the enable pin for the external VGA DAC. This takes a string in the
|
| /external/u-boot/arch/arm/dts/ |
| D | tegra20-colibri.dts | 30 /* VESA VGA */
|
| /external/u-boot/doc/device-tree-bindings/ |
| D | config.txt | 14 Tells U-Boot not to expect an attached keyboard with a VGA console
|
| /external/u-boot/arch/x86/include/asm/arch-quark/acpi/ |
| D | southcluster.asl | 31 /* VGA memory (0xa0000-0xbffff) */
|
| /external/u-boot/arch/x86/include/asm/arch-baytrail/acpi/ |
| D | southcluster.asl | 34 /* VGA memory (0xa0000-0xbffff) */
|
| /external/u-boot/drivers/video/ |
| D | Kconfig | 440 devices. Initialisation is mostly performed by a VGA boot ROM, with
444 a special tool which configures the VGA ROM, but the graphics
452 devices. Initialisation is mostly performed by a VGA boot ROM, with
456 a special tool which configures the VGA ROM, but the graphics
|
| /external/autotest/client/site_tests/suite_HWQual/ |
| D | README.txt | 142 example, if the DUT has one HDMI and one VGA out port, run:
|
| /external/mesa3d/docs/specs/OLD/ |
| D | EGL_MESA_screen_surface.txt | 216 two RAMDACs but three ports (VGA, DVI, TV).
|
| /external/libexif/po/ |
| D | ja.po | 4204 msgid "VGA basic"
4205 msgstr "VGA 基本"
4208 msgid "VGA normal"
4209 msgstr "VGA 通常"
4212 msgid "VGA fine"
4213 msgstr "VGA ファイン"
|
| D | sv.po | 4267 msgid "VGA basic"
4268 msgstr "VGA Grundläggande"
4272 msgid "VGA normal"
4273 msgstr "VGA Normal"
4277 msgid "VGA fine"
4278 msgstr "VGA Fin"
|
| D | cs.po | 4318 msgid "VGA basic"
4319 msgstr "VGA basic"
4322 msgid "VGA normal"
4323 msgstr "VGA normal"
4326 msgid "VGA fine"
4327 msgstr "VGA fine"
|
| D | bs.po | 4573 msgid "VGA basic"
4574 msgstr "VGA osnovni"
4577 msgid "VGA normal"
4578 msgstr "VGA normalni"
4581 msgid "VGA fine"
4582 msgstr "VGA fini"
|