• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h]
4  *
5  * Copyright (C) 2005 Ivan Kokshaysky
6  * Copyright (C) SAN People
7  * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
8  *
9  * Parallel I/O Controller (PIO) - System peripherals registers.
10  * Based on AT91RM9200 datasheet revision E.
11  */
12 
13 #ifndef AT91_PIO_H
14 #define AT91_PIO_H
15 
16 
17 #define AT91_ASM_PIO_RANGE	0x200
18 #define AT91_ASM_PIOC_ASR	\
19 	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x70)
20 #define AT91_ASM_PIOC_BSR	\
21 	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x74)
22 #define AT91_ASM_PIOC_PDR	\
23 	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x04)
24 #define AT91_ASM_PIOC_PUDR	\
25 	(ATMEL_BASE_PIO + AT91_PIO_PORTC * AT91_ASM_PIO_RANGE + 0x60)
26 
27 #define AT91_ASM_PIOD_PDR	\
28 	(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x04)
29 #define AT91_ASM_PIOD_PUDR	\
30 	(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x60)
31 #define AT91_ASM_PIOD_ASR	\
32 	(ATMEL_BASE_PIO + AT91_PIO_PORTD * AT91_ASM_PIO_RANGE + 0x70)
33 
34 #define PIO_SCDR_DIV		0x3fff	/* Slow Clock Divider Selection for Debouncing Mask */
35 
36 #ifndef __ASSEMBLY__
37 
38 typedef struct at91_port {
39 	u32	per;		/* 0x00 PIO Enable Register */
40 	u32	pdr;		/* 0x04 PIO Disable Register */
41 	u32	psr;		/* 0x08 PIO Status Register */
42 	u32	reserved0;
43 	u32	oer;		/* 0x10 Output Enable Register */
44 	u32	odr;		/* 0x14 Output Disable Registerr */
45 	u32	osr;		/* 0x18 Output Status Register */
46 	u32	reserved1;
47 	u32	ifer;		/* 0x20 Input Filter Enable Register */
48 	u32	ifdr;		/* 0x24 Input Filter Disable Register */
49 	u32	ifsr;		/* 0x28 Input Filter Status Register */
50 	u32	reserved2;
51 	u32	sodr;		/* 0x30 Set Output Data Register */
52 	u32	codr;		/* 0x34 Clear Output Data Register */
53 	u32	odsr;		/* 0x38 Output Data Status Register */
54 	u32	pdsr;		/* 0x3C Pin Data Status Register */
55 	u32	ier;		/* 0x40 Interrupt Enable Register */
56 	u32	idr;		/* 0x44 Interrupt Disable Register */
57 	u32	imr;		/* 0x48 Interrupt Mask Register */
58 	u32	isr;		/* 0x4C Interrupt Status Register */
59 	u32	mder;		/* 0x50 Multi-driver Enable Register */
60 	u32	mddr;		/* 0x54 Multi-driver Disable Register */
61 	u32	mdsr;		/* 0x58 Multi-driver Status Register */
62 	u32	reserved3;
63 	u32	pudr;		/* 0x60 Pull-up Disable Register */
64 	u32	puer;		/* 0x64 Pull-up Enable Register */
65 	u32	pusr;		/* 0x68 Pad Pull-up Status Register */
66 	u32	reserved4;
67 	union {
68 		struct {
69 			u32	abcdsr1;	/* 0x70 Peripheral ABCD Select Register 1 */
70 			u32	abcdsr2;	/* 0x74 Peripheral ABCD Select Register 2 */
71 			u32	reserved5[2];
72 			u32	ifscdr;		/* 0x80 Input Filter SCLK Disable Register */
73 			u32	ifscer;		/* 0x84 Input Filter SCLK Enable Register */
74 			u32	ifscsr;		/* 0x88 Input Filter SCLK Status Register */
75 			u32	scdr;		/* 0x8C SCLK Divider Debouncing Register */
76 			u32	ppddr;		/* 0x90 Pad Pull-down Disable Register */
77 			u32	ppder;		/* 0x94 Pad Pull-down Enable Register */
78 			u32	ppdsr;		/* 0x98 Pad Pull-down Status Register */
79 			u32	reserved6;	/*  */
80 		} pio3;
81 
82 		struct {
83 			u32	asr;		/* 0x70 Select A Register */
84 			u32	bsr;		/* 0x74 Select B Register */
85 			u32	absr;		/* 0x78 AB Select Status Register */
86 			u32	reserved5[9];	/*  */
87 		} pio2;
88 	} mux;
89 
90 	u32	ower;		/* 0xA0 Output Write Enable Register */
91 	u32	owdr;		/* 0xA4 Output Write Disable Register */
92 	u32	owsr;		/* OxA8 Output Write Status Register */
93 	u32	reserved7;	/*  */
94 	u32	aimer;		/* 0xB0 Additional INT Modes Enable Register */
95 	u32	aimdr;		/* 0xB4 Additional INT Modes Disable Register */
96 	u32	aimmr;		/* 0xB8 Additional INT Modes Mask Register */
97 	u32	reserved8;	/* */
98 	u32	esr;		/* 0xC0 Edge Select Register */
99 	u32	lsr;		/* 0xC4 Level Select Register */
100 	u32	elsr;		/* 0xC8 Edge/Level Status Register */
101 	u32	reserved9;	/* 0xCC */
102 	u32	fellsr;		/* 0xD0 Falling /Low Level Select Register */
103 	u32	rehlsr;		/* 0xD4 Rising /High Level Select Register */
104 	u32	frlhsr;		/* 0xD8 Fall/Rise - Low/High Status Register */
105 	u32	reserved10;	/* */
106 	u32	locksr;		/* 0xE0 Lock Status */
107 	u32	wpmr;		/* 0xE4 Write Protect Mode Register */
108 	u32	wpsr;		/* 0xE8 Write Protect Status Register */
109 	u32	reserved11[5];	/* */
110 	u32	schmitt;	/* 0x100 Schmitt Trigger Register */
111 	u32	reserved12[4];	/* 0x104 ~ 0x110 */
112 	u32	driver1;	/* 0x114 I/O Driver Register1(AT91SAM9x5's driver1) */
113 	u32	driver12;	/* 0x118 I/O Driver Register12(AT91SAM9x5's driver2 or SAMA5D3x's driver1 ) */
114 	u32	driver2;	/* 0x11C I/O Driver Register2(SAMA5D3x's driver2) */
115 	u32	reserved13[12];	/* 0x120 ~ 0x14C */
116 } at91_port_t;
117 
118 typedef union at91_pio {
119 	struct {
120 		at91_port_t	pioa;
121 		at91_port_t	piob;
122 		at91_port_t	pioc;
123 		at91_port_t	piod;	/* not present in all hardware */
124 		at91_port_t	pioe;/* not present in all hardware */
125 	};
126 	at91_port_t port[5];
127 } at91_pio_t;
128 
129 #ifdef CONFIG_AT91_GPIO
130 int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup);
131 int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup);
132 int at91_set_pio_input(unsigned port, unsigned pin, int use_pullup);
133 int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on);
134 int at91_set_pio_output(unsigned port, unsigned pin, int value);
135 int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup);
136 int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup);
137 int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on);
138 int at91_set_pio_value(unsigned port, unsigned pin, int value);
139 int at91_get_pio_value(unsigned port, unsigned pin);
140 
141 int at91_pio3_set_a_periph(unsigned port, unsigned pin, int use_pullup);
142 int at91_pio3_set_b_periph(unsigned port, unsigned pin, int use_pullup);
143 int at91_pio3_set_c_periph(unsigned port, unsigned pin, int use_pullup);
144 int at91_pio3_set_d_periph(unsigned port, unsigned pin, int use_pullup);
145 int at91_pio3_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div);
146 int at91_pio3_set_pio_pullup(unsigned port, unsigned pin, int use_pullup);
147 int at91_pio3_set_pio_pulldown(unsigned port, unsigned pin, int is_on);
148 int at91_pio3_set_pio_disable_schmitt_trig(unsigned port, unsigned pin);
149 #endif
150 #endif
151 
152 #define	AT91_PIO_PORTA		0x0
153 #define	AT91_PIO_PORTB		0x1
154 #define	AT91_PIO_PORTC		0x2
155 #define	AT91_PIO_PORTD		0x3
156 #define	AT91_PIO_PORTE		0x4
157 
158 #endif
159