1 /* 2 * Char device interface. 3 * 4 * Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net> 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a 7 * copy of this software and associated documentation files (the "Software"), 8 * to deal in the Software without restriction, including without limitation 9 * the rights to use, copy, modify, merge, publish, distribute, sublicense, 10 * and/or sell copies of the Software, and to permit persons to whom the 11 * Software is furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice (including the next 14 * paragraph) shall be included in all copies or substantial portions of the 15 * Software. 16 * 17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR 21 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, 22 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 23 * DEALINGS IN THE SOFTWARE. 24 */ 25 26 #ifndef _LINUX_FIREWIRE_CDEV_H 27 #define _LINUX_FIREWIRE_CDEV_H 28 29 #include <linux/ioctl.h> 30 #include <linux/types.h> 31 #include <linux/firewire-constants.h> 32 33 /* available since kernel version 2.6.22 */ 34 #define FW_CDEV_EVENT_BUS_RESET 0x00 35 #define FW_CDEV_EVENT_RESPONSE 0x01 36 #define FW_CDEV_EVENT_REQUEST 0x02 37 #define FW_CDEV_EVENT_ISO_INTERRUPT 0x03 38 39 /* available since kernel version 2.6.30 */ 40 #define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED 0x04 41 #define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED 0x05 42 43 /* available since kernel version 2.6.36 */ 44 #define FW_CDEV_EVENT_REQUEST2 0x06 45 #define FW_CDEV_EVENT_PHY_PACKET_SENT 0x07 46 #define FW_CDEV_EVENT_PHY_PACKET_RECEIVED 0x08 47 #define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 0x09 48 49 /** 50 * struct fw_cdev_event_common - Common part of all fw_cdev_event_* types 51 * @closure: For arbitrary use by userspace 52 * @type: Discriminates the fw_cdev_event_* types 53 * 54 * This struct may be used to access generic members of all fw_cdev_event_* 55 * types regardless of the specific type. 56 * 57 * Data passed in the @closure field for a request will be returned in the 58 * corresponding event. It is big enough to hold a pointer on all platforms. 59 * The ioctl used to set @closure depends on the @type of event. 60 */ 61 struct fw_cdev_event_common { 62 __u64 closure; 63 __u32 type; 64 }; 65 66 /** 67 * struct fw_cdev_event_bus_reset - Sent when a bus reset occurred 68 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl 69 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET 70 * @node_id: New node ID of this node 71 * @local_node_id: Node ID of the local node, i.e. of the controller 72 * @bm_node_id: Node ID of the bus manager 73 * @irm_node_id: Node ID of the iso resource manager 74 * @root_node_id: Node ID of the root node 75 * @generation: New bus generation 76 * 77 * This event is sent when the bus the device belongs to goes through a bus 78 * reset. It provides information about the new bus configuration, such as 79 * new node ID for this device, new root ID, and others. 80 * 81 * If @bm_node_id is 0xffff right after bus reset it can be reread by an 82 * %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished. 83 * Kernels with ABI version < 4 do not set @bm_node_id. 84 */ 85 struct fw_cdev_event_bus_reset { 86 __u64 closure; 87 __u32 type; 88 __u32 node_id; 89 __u32 local_node_id; 90 __u32 bm_node_id; 91 __u32 irm_node_id; 92 __u32 root_node_id; 93 __u32 generation; 94 }; 95 96 /** 97 * struct fw_cdev_event_response - Sent when a response packet was received 98 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST 99 * or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST 100 * or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl 101 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE 102 * @rcode: Response code returned by the remote node 103 * @length: Data length, i.e. the response's payload size in bytes 104 * @data: Payload data, if any 105 * 106 * This event is sent when the stack receives a response to an outgoing request 107 * sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses 108 * carrying data (read and lock responses) follows immediately and can be 109 * accessed through the @data field. 110 * 111 * The event is also generated after conclusions of transactions that do not 112 * involve response packets. This includes unified write transactions, 113 * broadcast write transactions, and transmission of asynchronous stream 114 * packets. @rcode indicates success or failure of such transmissions. 115 */ 116 struct fw_cdev_event_response { 117 __u64 closure; 118 __u32 type; 119 __u32 rcode; 120 __u32 length; 121 __u32 data[0]; 122 }; 123 124 /** 125 * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2 126 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl 127 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST 128 * @tcode: Transaction code of the incoming request 129 * @offset: The offset into the 48-bit per-node address space 130 * @handle: Reference to the kernel-side pending request 131 * @length: Data length, i.e. the request's payload size in bytes 132 * @data: Incoming data, if any 133 * 134 * This event is sent instead of &fw_cdev_event_request2 if the kernel or 135 * the client implements ABI version <= 3. &fw_cdev_event_request lacks 136 * essential information; use &fw_cdev_event_request2 instead. 137 */ 138 struct fw_cdev_event_request { 139 __u64 closure; 140 __u32 type; 141 __u32 tcode; 142 __u64 offset; 143 __u32 handle; 144 __u32 length; 145 __u32 data[0]; 146 }; 147 148 /** 149 * struct fw_cdev_event_request2 - Sent on incoming request to an address region 150 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl 151 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2 152 * @tcode: Transaction code of the incoming request 153 * @offset: The offset into the 48-bit per-node address space 154 * @source_node_id: Sender node ID 155 * @destination_node_id: Destination node ID 156 * @card: The index of the card from which the request came 157 * @generation: Bus generation in which the request is valid 158 * @handle: Reference to the kernel-side pending request 159 * @length: Data length, i.e. the request's payload size in bytes 160 * @data: Incoming data, if any 161 * 162 * This event is sent when the stack receives an incoming request to an address 163 * region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is 164 * guaranteed to be completely contained in the specified region. Userspace is 165 * responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl, 166 * using the same @handle. 167 * 168 * The payload data for requests carrying data (write and lock requests) 169 * follows immediately and can be accessed through the @data field. 170 * 171 * Unlike &fw_cdev_event_request, @tcode of lock requests is one of the 172 * firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT, 173 * i.e. encodes the extended transaction code. 174 * 175 * @card may differ from &fw_cdev_get_info.card because requests are received 176 * from all cards of the Linux host. @source_node_id, @destination_node_id, and 177 * @generation pertain to that card. Destination node ID and bus generation may 178 * therefore differ from the corresponding fields of the last 179 * &fw_cdev_event_bus_reset. 180 * 181 * @destination_node_id may also differ from the current node ID because of a 182 * non-local bus ID part or in case of a broadcast write request. Note, a 183 * client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a 184 * broadcast write request; the kernel will then release the kernel-side pending 185 * request but will not actually send a response packet. 186 * 187 * In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already 188 * sent a write response immediately after the request was received; in this 189 * case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to 190 * release the kernel-side pending request, though another response won't be 191 * sent. 192 * 193 * If the client subsequently needs to initiate requests to the sender node of 194 * an &fw_cdev_event_request2, it needs to use a device file with matching 195 * card index, node ID, and generation for outbound requests. 196 */ 197 struct fw_cdev_event_request2 { 198 __u64 closure; 199 __u32 type; 200 __u32 tcode; 201 __u64 offset; 202 __u32 source_node_id; 203 __u32 destination_node_id; 204 __u32 card; 205 __u32 generation; 206 __u32 handle; 207 __u32 length; 208 __u32 data[0]; 209 }; 210 211 /** 212 * struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed 213 * @closure: See &fw_cdev_event_common; 214 * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl 215 * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT 216 * @cycle: Cycle counter of the last completed packet 217 * @header_length: Total length of following headers, in bytes 218 * @header: Stripped headers, if any 219 * 220 * This event is sent when the controller has completed an &fw_cdev_iso_packet 221 * with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with 222 * %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets 223 * without the interrupt bit set that the kernel's internal buffer for @header 224 * is about to overflow. (In the last case, ABI versions < 5 drop header data 225 * up to the next interrupt packet.) 226 * 227 * Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT): 228 * 229 * In version 3 and some implementations of version 2 of the ABI, &header_length 230 * is a multiple of 4 and &header contains timestamps of all packets up until 231 * the interrupt packet. The format of the timestamps is as described below for 232 * isochronous reception. In version 1 of the ABI, &header_length was 0. 233 * 234 * Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE): 235 * 236 * The headers stripped of all packets up until and including the interrupt 237 * packet are returned in the @header field. The amount of header data per 238 * packet is as specified at iso context creation by 239 * &fw_cdev_create_iso_context.header_size. 240 * 241 * Hence, _interrupt.header_length / _context.header_size is the number of 242 * packets received in this interrupt event. The client can now iterate 243 * through the mmap()'ed DMA buffer according to this number of packets and 244 * to the buffer sizes as the client specified in &fw_cdev_queue_iso. 245 * 246 * Since version 2 of this ABI, the portion for each packet in _interrupt.header 247 * consists of the 1394 isochronous packet header, followed by a timestamp 248 * quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets 249 * from the packet payload if &fw_cdev_create_iso_context.header_size > 8. 250 * 251 * Format of 1394 iso packet header: 16 bits data_length, 2 bits tag, 6 bits 252 * channel, 4 bits tcode, 4 bits sy, in big endian byte order. 253 * data_length is the actual received size of the packet without the four 254 * 1394 iso packet header bytes. 255 * 256 * Format of timestamp: 16 bits invalid, 3 bits cycleSeconds, 13 bits 257 * cycleCount, in big endian byte order. 258 * 259 * In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload 260 * data followed directly after the 1394 is header if header_size > 4. 261 * Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2. 262 */ 263 struct fw_cdev_event_iso_interrupt { 264 __u64 closure; 265 __u32 type; 266 __u32 cycle; 267 __u32 header_length; 268 __u32 header[0]; 269 }; 270 271 /** 272 * struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed 273 * @closure: See &fw_cdev_event_common; 274 * set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl 275 * @type: %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 276 * @completed: Offset into the receive buffer; data before this offset is valid 277 * 278 * This event is sent in multichannel contexts (context type 279 * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer 280 * chunks that have been completely filled and that have the 281 * %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with 282 * %FW_CDEV_IOC_FLUSH_ISO. 283 * 284 * The buffer is continuously filled with the following data, per packet: 285 * - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt, 286 * but in little endian byte order, 287 * - packet payload (as many bytes as specified in the data_length field of 288 * the 1394 iso packet header) in big endian byte order, 289 * - 0...3 padding bytes as needed to align the following trailer quadlet, 290 * - trailer quadlet, containing the reception timestamp as described at 291 * &fw_cdev_event_iso_interrupt, but in little endian byte order. 292 * 293 * Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8. 294 * When processing the data, stop before a packet that would cross the 295 * @completed offset. 296 * 297 * A packet near the end of a buffer chunk will typically spill over into the 298 * next queued buffer chunk. It is the responsibility of the client to check 299 * for this condition, assemble a broken-up packet from its parts, and not to 300 * re-queue any buffer chunks in which as yet unread packet parts reside. 301 */ 302 struct fw_cdev_event_iso_interrupt_mc { 303 __u64 closure; 304 __u32 type; 305 __u32 completed; 306 }; 307 308 /** 309 * struct fw_cdev_event_iso_resource - Iso resources were allocated or freed 310 * @closure: See &fw_cdev_event_common; 311 * set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl 312 * @type: %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or 313 * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED 314 * @handle: Reference by which an allocated resource can be deallocated 315 * @channel: Isochronous channel which was (de)allocated, if any 316 * @bandwidth: Bandwidth allocation units which were (de)allocated, if any 317 * 318 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous 319 * resource was allocated at the IRM. The client has to check @channel and 320 * @bandwidth for whether the allocation actually succeeded. 321 * 322 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous 323 * resource was deallocated at the IRM. It is also sent when automatic 324 * reallocation after a bus reset failed. 325 * 326 * @channel is <0 if no channel was (de)allocated or if reallocation failed. 327 * @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed. 328 */ 329 struct fw_cdev_event_iso_resource { 330 __u64 closure; 331 __u32 type; 332 __u32 handle; 333 __s32 channel; 334 __s32 bandwidth; 335 }; 336 337 /** 338 * struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received 339 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET 340 * or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl 341 * @type: %FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED 342 * @rcode: %RCODE_..., indicates success or failure of transmission 343 * @length: Data length in bytes 344 * @data: Incoming data 345 * 346 * If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty, 347 * except in case of a ping packet: Then, @length is 4, and @data[0] is the 348 * ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE. 349 * 350 * If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data 351 * consists of the two PHY packet quadlets, in host byte order. 352 */ 353 struct fw_cdev_event_phy_packet { 354 __u64 closure; 355 __u32 type; 356 __u32 rcode; 357 __u32 length; 358 __u32 data[0]; 359 }; 360 361 /** 362 * union fw_cdev_event - Convenience union of fw_cdev_event_* types 363 * @common: Valid for all types 364 * @bus_reset: Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET 365 * @response: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE 366 * @request: Valid if @common.type == %FW_CDEV_EVENT_REQUEST 367 * @request2: Valid if @common.type == %FW_CDEV_EVENT_REQUEST2 368 * @iso_interrupt: Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT 369 * @iso_interrupt_mc: Valid if @common.type == 370 * %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 371 * @iso_resource: Valid if @common.type == 372 * %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or 373 * %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED 374 * @phy_packet: Valid if @common.type == 375 * %FW_CDEV_EVENT_PHY_PACKET_SENT or 376 * %FW_CDEV_EVENT_PHY_PACKET_RECEIVED 377 * 378 * Convenience union for userspace use. Events could be read(2) into an 379 * appropriately aligned char buffer and then cast to this union for further 380 * processing. Note that for a request, response or iso_interrupt event, 381 * the data[] or header[] may make the size of the full event larger than 382 * sizeof(union fw_cdev_event). Also note that if you attempt to read(2) 383 * an event into a buffer that is not large enough for it, the data that does 384 * not fit will be discarded so that the next read(2) will return a new event. 385 */ 386 union fw_cdev_event { 387 struct fw_cdev_event_common common; 388 struct fw_cdev_event_bus_reset bus_reset; 389 struct fw_cdev_event_response response; 390 struct fw_cdev_event_request request; 391 struct fw_cdev_event_request2 request2; /* added in 2.6.36 */ 392 struct fw_cdev_event_iso_interrupt iso_interrupt; 393 struct fw_cdev_event_iso_interrupt_mc iso_interrupt_mc; /* added in 2.6.36 */ 394 struct fw_cdev_event_iso_resource iso_resource; /* added in 2.6.30 */ 395 struct fw_cdev_event_phy_packet phy_packet; /* added in 2.6.36 */ 396 }; 397 398 /* available since kernel version 2.6.22 */ 399 #define FW_CDEV_IOC_GET_INFO _IOWR('#', 0x00, struct fw_cdev_get_info) 400 #define FW_CDEV_IOC_SEND_REQUEST _IOW('#', 0x01, struct fw_cdev_send_request) 401 #define FW_CDEV_IOC_ALLOCATE _IOWR('#', 0x02, struct fw_cdev_allocate) 402 #define FW_CDEV_IOC_DEALLOCATE _IOW('#', 0x03, struct fw_cdev_deallocate) 403 #define FW_CDEV_IOC_SEND_RESPONSE _IOW('#', 0x04, struct fw_cdev_send_response) 404 #define FW_CDEV_IOC_INITIATE_BUS_RESET _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset) 405 #define FW_CDEV_IOC_ADD_DESCRIPTOR _IOWR('#', 0x06, struct fw_cdev_add_descriptor) 406 #define FW_CDEV_IOC_REMOVE_DESCRIPTOR _IOW('#', 0x07, struct fw_cdev_remove_descriptor) 407 #define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context) 408 #define FW_CDEV_IOC_QUEUE_ISO _IOWR('#', 0x09, struct fw_cdev_queue_iso) 409 #define FW_CDEV_IOC_START_ISO _IOW('#', 0x0a, struct fw_cdev_start_iso) 410 #define FW_CDEV_IOC_STOP_ISO _IOW('#', 0x0b, struct fw_cdev_stop_iso) 411 412 /* available since kernel version 2.6.24 */ 413 #define FW_CDEV_IOC_GET_CYCLE_TIMER _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer) 414 415 /* available since kernel version 2.6.30 */ 416 #define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource) 417 #define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE _IOW('#', 0x0e, struct fw_cdev_deallocate) 418 #define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource) 419 #define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource) 420 #define FW_CDEV_IOC_GET_SPEED _IO('#', 0x11) /* returns speed code */ 421 #define FW_CDEV_IOC_SEND_BROADCAST_REQUEST _IOW('#', 0x12, struct fw_cdev_send_request) 422 #define FW_CDEV_IOC_SEND_STREAM_PACKET _IOW('#', 0x13, struct fw_cdev_send_stream_packet) 423 424 /* available since kernel version 2.6.34 */ 425 #define FW_CDEV_IOC_GET_CYCLE_TIMER2 _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2) 426 427 /* available since kernel version 2.6.36 */ 428 #define FW_CDEV_IOC_SEND_PHY_PACKET _IOWR('#', 0x15, struct fw_cdev_send_phy_packet) 429 #define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets) 430 #define FW_CDEV_IOC_SET_ISO_CHANNELS _IOW('#', 0x17, struct fw_cdev_set_iso_channels) 431 432 /* available since kernel version 3.4 */ 433 #define FW_CDEV_IOC_FLUSH_ISO _IOW('#', 0x18, struct fw_cdev_flush_iso) 434 435 /* 436 * ABI version history 437 * 1 (2.6.22) - initial version 438 * (2.6.24) - added %FW_CDEV_IOC_GET_CYCLE_TIMER 439 * 2 (2.6.30) - changed &fw_cdev_event_iso_interrupt.header if 440 * &fw_cdev_create_iso_context.header_size is 8 or more 441 * - added %FW_CDEV_IOC_*_ISO_RESOURCE*, 442 * %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST, 443 * %FW_CDEV_IOC_SEND_STREAM_PACKET 444 * (2.6.32) - added time stamp to xmit &fw_cdev_event_iso_interrupt 445 * (2.6.33) - IR has always packet-per-buffer semantics now, not one of 446 * dual-buffer or packet-per-buffer depending on hardware 447 * - shared use and auto-response for FCP registers 448 * 3 (2.6.34) - made &fw_cdev_get_cycle_timer reliable 449 * - added %FW_CDEV_IOC_GET_CYCLE_TIMER2 450 * 4 (2.6.36) - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*, 451 * and &fw_cdev_allocate.region_end 452 * - implemented &fw_cdev_event_bus_reset.bm_node_id 453 * - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS 454 * - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL, 455 * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and 456 * %FW_CDEV_IOC_SET_ISO_CHANNELS 457 * 5 (3.4) - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to 458 * avoid dropping data 459 * - added %FW_CDEV_IOC_FLUSH_ISO 460 */ 461 462 /** 463 * struct fw_cdev_get_info - General purpose information ioctl 464 * @version: The version field is just a running serial number. Both an 465 * input parameter (ABI version implemented by the client) and 466 * output parameter (ABI version implemented by the kernel). 467 * A client shall fill in the ABI @version for which the client 468 * was implemented. This is necessary for forward compatibility. 469 * @rom_length: If @rom is non-zero, up to @rom_length bytes of Configuration 470 * ROM will be copied into that user space address. In either 471 * case, @rom_length is updated with the actual length of the 472 * Configuration ROM. 473 * @rom: If non-zero, address of a buffer to be filled by a copy of the 474 * device's Configuration ROM 475 * @bus_reset: If non-zero, address of a buffer to be filled by a 476 * &struct fw_cdev_event_bus_reset with the current state 477 * of the bus. This does not cause a bus reset to happen. 478 * @bus_reset_closure: Value of &closure in this and subsequent bus reset events 479 * @card: The index of the card this device belongs to 480 * 481 * The %FW_CDEV_IOC_GET_INFO ioctl is usually the very first one which a client 482 * performs right after it opened a /dev/fw* file. 483 * 484 * As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2) 485 * is started by this ioctl. 486 */ 487 struct fw_cdev_get_info { 488 __u32 version; 489 __u32 rom_length; 490 __u64 rom; 491 __u64 bus_reset; 492 __u64 bus_reset_closure; 493 __u32 card; 494 }; 495 496 /** 497 * struct fw_cdev_send_request - Send an asynchronous request packet 498 * @tcode: Transaction code of the request 499 * @length: Length of outgoing payload, in bytes 500 * @offset: 48-bit offset at destination node 501 * @closure: Passed back to userspace in the response event 502 * @data: Userspace pointer to payload 503 * @generation: The bus generation where packet is valid 504 * 505 * Send a request to the device. This ioctl implements all outgoing requests. 506 * Both quadlet and block request specify the payload as a pointer to the data 507 * in the @data field. Once the transaction completes, the kernel writes an 508 * &fw_cdev_event_response event back. The @closure field is passed back to 509 * user space in the response event. 510 */ 511 struct fw_cdev_send_request { 512 __u32 tcode; 513 __u32 length; 514 __u64 offset; 515 __u64 closure; 516 __u64 data; 517 __u32 generation; 518 }; 519 520 /** 521 * struct fw_cdev_send_response - Send an asynchronous response packet 522 * @rcode: Response code as determined by the userspace handler 523 * @length: Length of outgoing payload, in bytes 524 * @data: Userspace pointer to payload 525 * @handle: The handle from the &fw_cdev_event_request 526 * 527 * Send a response to an incoming request. By setting up an address range using 528 * the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests. An 529 * incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must 530 * send a reply using this ioctl. The event has a handle to the kernel-side 531 * pending transaction, which should be used with this ioctl. 532 */ 533 struct fw_cdev_send_response { 534 __u32 rcode; 535 __u32 length; 536 __u64 data; 537 __u32 handle; 538 }; 539 540 /** 541 * struct fw_cdev_allocate - Allocate a CSR in an address range 542 * @offset: Start offset of the address range 543 * @closure: To be passed back to userspace in request events 544 * @length: Length of the CSR, in bytes 545 * @handle: Handle to the allocation, written by the kernel 546 * @region_end: First address above the address range (added in ABI v4, 2.6.36) 547 * 548 * Allocate an address range in the 48-bit address space on the local node 549 * (the controller). This allows userspace to listen for requests with an 550 * offset within that address range. Every time when the kernel receives a 551 * request within the range, an &fw_cdev_event_request2 event will be emitted. 552 * (If the kernel or the client implements ABI version <= 3, an 553 * &fw_cdev_event_request will be generated instead.) 554 * 555 * The @closure field is passed back to userspace in these request events. 556 * The @handle field is an out parameter, returning a handle to the allocated 557 * range to be used for later deallocation of the range. 558 * 559 * The address range is allocated on all local nodes. The address allocation 560 * is exclusive except for the FCP command and response registers. If an 561 * exclusive address region is already in use, the ioctl fails with errno set 562 * to %EBUSY. 563 * 564 * If kernel and client implement ABI version >= 4, the kernel looks up a free 565 * spot of size @length inside [@offset..@region_end) and, if found, writes 566 * the start address of the new CSR back in @offset. I.e. @offset is an 567 * in and out parameter. If this automatic placement of a CSR in a bigger 568 * address range is not desired, the client simply needs to set @region_end 569 * = @offset + @length. 570 * 571 * If the kernel or the client implements ABI version <= 3, @region_end is 572 * ignored and effectively assumed to be @offset + @length. 573 * 574 * @region_end is only present in a kernel header >= 2.6.36. If necessary, 575 * this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2. 576 */ 577 struct fw_cdev_allocate { 578 __u64 offset; 579 __u64 closure; 580 __u32 length; 581 __u32 handle; 582 __u64 region_end; /* available since kernel version 2.6.36 */ 583 }; 584 585 /** 586 * struct fw_cdev_deallocate - Free a CSR address range or isochronous resource 587 * @handle: Handle to the address range or iso resource, as returned by the 588 * kernel when the range or resource was allocated 589 */ 590 struct fw_cdev_deallocate { 591 __u32 handle; 592 }; 593 594 #define FW_CDEV_LONG_RESET 0 595 #define FW_CDEV_SHORT_RESET 1 596 597 /** 598 * struct fw_cdev_initiate_bus_reset - Initiate a bus reset 599 * @type: %FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET 600 * 601 * Initiate a bus reset for the bus this device is on. The bus reset can be 602 * either the original (long) bus reset or the arbitrated (short) bus reset 603 * introduced in 1394a-2000. 604 * 605 * The ioctl returns immediately. A subsequent &fw_cdev_event_bus_reset 606 * indicates when the reset actually happened. Since ABI v4, this may be 607 * considerably later than the ioctl because the kernel ensures a grace period 608 * between subsequent bus resets as per IEEE 1394 bus management specification. 609 */ 610 struct fw_cdev_initiate_bus_reset { 611 __u32 type; 612 }; 613 614 /** 615 * struct fw_cdev_add_descriptor - Add contents to the local node's config ROM 616 * @immediate: If non-zero, immediate key to insert before pointer 617 * @key: Upper 8 bits of root directory pointer 618 * @data: Userspace pointer to contents of descriptor block 619 * @length: Length of descriptor block data, in quadlets 620 * @handle: Handle to the descriptor, written by the kernel 621 * 622 * Add a descriptor block and optionally a preceding immediate key to the local 623 * node's Configuration ROM. 624 * 625 * The @key field specifies the upper 8 bits of the descriptor root directory 626 * pointer and the @data and @length fields specify the contents. The @key 627 * should be of the form 0xXX000000. The offset part of the root directory entry 628 * will be filled in by the kernel. 629 * 630 * If not 0, the @immediate field specifies an immediate key which will be 631 * inserted before the root directory pointer. 632 * 633 * @immediate, @key, and @data array elements are CPU-endian quadlets. 634 * 635 * If successful, the kernel adds the descriptor and writes back a @handle to 636 * the kernel-side object to be used for later removal of the descriptor block 637 * and immediate key. The kernel will also generate a bus reset to signal the 638 * change of the Configuration ROM to other nodes. 639 * 640 * This ioctl affects the Configuration ROMs of all local nodes. 641 * The ioctl only succeeds on device files which represent a local node. 642 */ 643 struct fw_cdev_add_descriptor { 644 __u32 immediate; 645 __u32 key; 646 __u64 data; 647 __u32 length; 648 __u32 handle; 649 }; 650 651 /** 652 * struct fw_cdev_remove_descriptor - Remove contents from the Configuration ROM 653 * @handle: Handle to the descriptor, as returned by the kernel when the 654 * descriptor was added 655 * 656 * Remove a descriptor block and accompanying immediate key from the local 657 * nodes' Configuration ROMs. The kernel will also generate a bus reset to 658 * signal the change of the Configuration ROM to other nodes. 659 */ 660 struct fw_cdev_remove_descriptor { 661 __u32 handle; 662 }; 663 664 #define FW_CDEV_ISO_CONTEXT_TRANSMIT 0 665 #define FW_CDEV_ISO_CONTEXT_RECEIVE 1 666 #define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL 2 /* added in 2.6.36 */ 667 668 /** 669 * struct fw_cdev_create_iso_context - Create a context for isochronous I/O 670 * @type: %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or 671 * %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL 672 * @header_size: Header size to strip in single-channel reception 673 * @channel: Channel to bind to in single-channel reception or transmission 674 * @speed: Transmission speed 675 * @closure: To be returned in &fw_cdev_event_iso_interrupt or 676 * &fw_cdev_event_iso_interrupt_multichannel 677 * @handle: Handle to context, written back by kernel 678 * 679 * Prior to sending or receiving isochronous I/O, a context must be created. 680 * The context records information about the transmit or receive configuration 681 * and typically maps to an underlying hardware resource. A context is set up 682 * for either sending or receiving. It is bound to a specific isochronous 683 * @channel. 684 * 685 * In case of multichannel reception, @header_size and @channel are ignored 686 * and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS. 687 * 688 * For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4 689 * and must be a multiple of 4. It is ignored in other context types. 690 * 691 * @speed is ignored in receive context types. 692 * 693 * If a context was successfully created, the kernel writes back a handle to the 694 * context, which must be passed in for subsequent operations on that context. 695 * 696 * Limitations: 697 * No more than one iso context can be created per fd. 698 * The total number of contexts that all userspace and kernelspace drivers can 699 * create on a card at a time is a hardware limit, typically 4 or 8 contexts per 700 * direction, and of them at most one multichannel receive context. 701 */ 702 struct fw_cdev_create_iso_context { 703 __u32 type; 704 __u32 header_size; 705 __u32 channel; 706 __u32 speed; 707 __u64 closure; 708 __u32 handle; 709 }; 710 711 /** 712 * struct fw_cdev_set_iso_channels - Select channels in multichannel reception 713 * @channels: Bitmask of channels to listen to 714 * @handle: Handle of the mutichannel receive context 715 * 716 * @channels is the bitwise or of 1ULL << n for each channel n to listen to. 717 * 718 * The ioctl fails with errno %EBUSY if there is already another receive context 719 * on a channel in @channels. In that case, the bitmask of all unoccupied 720 * channels is returned in @channels. 721 */ 722 struct fw_cdev_set_iso_channels { 723 __u64 channels; 724 __u32 handle; 725 }; 726 727 #define FW_CDEV_ISO_PAYLOAD_LENGTH(v) (v) 728 #define FW_CDEV_ISO_INTERRUPT (1 << 16) 729 #define FW_CDEV_ISO_SKIP (1 << 17) 730 #define FW_CDEV_ISO_SYNC (1 << 17) 731 #define FW_CDEV_ISO_TAG(v) ((v) << 18) 732 #define FW_CDEV_ISO_SY(v) ((v) << 20) 733 #define FW_CDEV_ISO_HEADER_LENGTH(v) ((v) << 24) 734 735 /** 736 * struct fw_cdev_iso_packet - Isochronous packet 737 * @control: Contains the header length (8 uppermost bits), 738 * the sy field (4 bits), the tag field (2 bits), a sync flag 739 * or a skip flag (1 bit), an interrupt flag (1 bit), and the 740 * payload length (16 lowermost bits) 741 * @header: Header and payload in case of a transmit context. 742 * 743 * &struct fw_cdev_iso_packet is used to describe isochronous packet queues. 744 * Use the FW_CDEV_ISO_* macros to fill in @control. 745 * The @header array is empty in case of receive contexts. 746 * 747 * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT: 748 * 749 * @control.HEADER_LENGTH must be a multiple of 4. It specifies the numbers of 750 * bytes in @header that will be prepended to the packet's payload. These bytes 751 * are copied into the kernel and will not be accessed after the ioctl has 752 * returned. 753 * 754 * The @control.SY and TAG fields are copied to the iso packet header. These 755 * fields are specified by IEEE 1394a and IEC 61883-1. 756 * 757 * The @control.SKIP flag specifies that no packet is to be sent in a frame. 758 * When using this, all other fields except @control.INTERRUPT must be zero. 759 * 760 * When a packet with the @control.INTERRUPT flag set has been completed, an 761 * &fw_cdev_event_iso_interrupt event will be sent. 762 * 763 * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE: 764 * 765 * @control.HEADER_LENGTH must be a multiple of the context's header_size. 766 * If the HEADER_LENGTH is larger than the context's header_size, multiple 767 * packets are queued for this entry. 768 * 769 * The @control.SY and TAG fields are ignored. 770 * 771 * If the @control.SYNC flag is set, the context drops all packets until a 772 * packet with a sy field is received which matches &fw_cdev_start_iso.sync. 773 * 774 * @control.PAYLOAD_LENGTH defines how many payload bytes can be received for 775 * one packet (in addition to payload quadlets that have been defined as headers 776 * and are stripped and returned in the &fw_cdev_event_iso_interrupt structure). 777 * If more bytes are received, the additional bytes are dropped. If less bytes 778 * are received, the remaining bytes in this part of the payload buffer will not 779 * be written to, not even by the next packet. I.e., packets received in 780 * consecutive frames will not necessarily be consecutive in memory. If an 781 * entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally 782 * among them. 783 * 784 * When a packet with the @control.INTERRUPT flag set has been completed, an 785 * &fw_cdev_event_iso_interrupt event will be sent. An entry that has queued 786 * multiple receive packets is completed when its last packet is completed. 787 * 788 * Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL: 789 * 790 * Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since 791 * it specifies a chunk of the mmap()'ed buffer, while the number and alignment 792 * of packets to be placed into the buffer chunk is not known beforehand. 793 * 794 * @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room 795 * for header, payload, padding, and trailer bytes of one or more packets. 796 * It must be a multiple of 4. 797 * 798 * @control.HEADER_LENGTH, TAG and SY are ignored. SYNC is treated as described 799 * for single-channel reception. 800 * 801 * When a buffer chunk with the @control.INTERRUPT flag set has been filled 802 * entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent. 803 */ 804 struct fw_cdev_iso_packet { 805 __u32 control; 806 __u32 header[0]; 807 }; 808 809 /** 810 * struct fw_cdev_queue_iso - Queue isochronous packets for I/O 811 * @packets: Userspace pointer to an array of &fw_cdev_iso_packet 812 * @data: Pointer into mmap()'ed payload buffer 813 * @size: Size of the @packets array, in bytes 814 * @handle: Isochronous context handle 815 * 816 * Queue a number of isochronous packets for reception or transmission. 817 * This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs, 818 * which describe how to transmit from or receive into a contiguous region 819 * of a mmap()'ed payload buffer. As part of transmit packet descriptors, 820 * a series of headers can be supplied, which will be prepended to the 821 * payload during DMA. 822 * 823 * The kernel may or may not queue all packets, but will write back updated 824 * values of the @packets, @data and @size fields, so the ioctl can be 825 * resubmitted easily. 826 * 827 * In case of a multichannel receive context, @data must be quadlet-aligned 828 * relative to the buffer start. 829 */ 830 struct fw_cdev_queue_iso { 831 __u64 packets; 832 __u64 data; 833 __u32 size; 834 __u32 handle; 835 }; 836 837 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG0 1 838 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG1 2 839 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG2 4 840 #define FW_CDEV_ISO_CONTEXT_MATCH_TAG3 8 841 #define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS 15 842 843 /** 844 * struct fw_cdev_start_iso - Start an isochronous transmission or reception 845 * @cycle: Cycle in which to start I/O. If @cycle is greater than or 846 * equal to 0, the I/O will start on that cycle. 847 * @sync: Determines the value to wait for for receive packets that have 848 * the %FW_CDEV_ISO_SYNC bit set 849 * @tags: Tag filter bit mask. Only valid for isochronous reception. 850 * Determines the tag values for which packets will be accepted. 851 * Use FW_CDEV_ISO_CONTEXT_MATCH_* macros to set @tags. 852 * @handle: Isochronous context handle within which to transmit or receive 853 */ 854 struct fw_cdev_start_iso { 855 __s32 cycle; 856 __u32 sync; 857 __u32 tags; 858 __u32 handle; 859 }; 860 861 /** 862 * struct fw_cdev_stop_iso - Stop an isochronous transmission or reception 863 * @handle: Handle of isochronous context to stop 864 */ 865 struct fw_cdev_stop_iso { 866 __u32 handle; 867 }; 868 869 /** 870 * struct fw_cdev_flush_iso - flush completed iso packets 871 * @handle: handle of isochronous context to flush 872 * 873 * For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, 874 * report any completed packets. 875 * 876 * For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current 877 * offset in the receive buffer, if it has changed; this is typically in the 878 * middle of some buffer chunk. 879 * 880 * Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 881 * events generated by this ioctl are sent synchronously, i.e., are available 882 * for reading from the file descriptor when this ioctl returns. 883 */ 884 struct fw_cdev_flush_iso { 885 __u32 handle; 886 }; 887 888 /** 889 * struct fw_cdev_get_cycle_timer - read cycle timer register 890 * @local_time: system time, in microseconds since the Epoch 891 * @cycle_timer: Cycle Time register contents 892 * 893 * Same as %FW_CDEV_IOC_GET_CYCLE_TIMER2, but fixed to use %CLOCK_REALTIME 894 * and only with microseconds resolution. 895 * 896 * In version 1 and 2 of the ABI, this ioctl returned unreliable (non- 897 * monotonic) @cycle_timer values on certain controllers. 898 */ 899 struct fw_cdev_get_cycle_timer { 900 __u64 local_time; 901 __u32 cycle_timer; 902 }; 903 904 /** 905 * struct fw_cdev_get_cycle_timer2 - read cycle timer register 906 * @tv_sec: system time, seconds 907 * @tv_nsec: system time, sub-seconds part in nanoseconds 908 * @clk_id: input parameter, clock from which to get the system time 909 * @cycle_timer: Cycle Time register contents 910 * 911 * The %FW_CDEV_IOC_GET_CYCLE_TIMER2 ioctl reads the isochronous cycle timer 912 * and also the system clock. This allows to correlate reception time of 913 * isochronous packets with system time. 914 * 915 * @clk_id lets you choose a clock like with POSIX' clock_gettime function. 916 * Supported @clk_id values are POSIX' %CLOCK_REALTIME and %CLOCK_MONOTONIC 917 * and Linux' %CLOCK_MONOTONIC_RAW. 918 * 919 * @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and 920 * 12 bits cycleOffset, in host byte order. Cf. the Cycle Time register 921 * per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394. 922 */ 923 struct fw_cdev_get_cycle_timer2 { 924 __s64 tv_sec; 925 __s32 tv_nsec; 926 __s32 clk_id; 927 __u32 cycle_timer; 928 }; 929 930 /** 931 * struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth 932 * @closure: Passed back to userspace in corresponding iso resource events 933 * @channels: Isochronous channels of which one is to be (de)allocated 934 * @bandwidth: Isochronous bandwidth units to be (de)allocated 935 * @handle: Handle to the allocation, written by the kernel (only valid in 936 * case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls) 937 * 938 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an 939 * isochronous channel and/or of isochronous bandwidth at the isochronous 940 * resource manager (IRM). Only one of the channels specified in @channels is 941 * allocated. An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after 942 * communication with the IRM, indicating success or failure in the event data. 943 * The kernel will automatically reallocate the resources after bus resets. 944 * Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event 945 * will be sent. The kernel will also automatically deallocate the resources 946 * when the file descriptor is closed. 947 * 948 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate 949 * deallocation of resources which were allocated as described above. 950 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation. 951 * 952 * The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation 953 * without automatic re- or deallocation. 954 * An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation, 955 * indicating success or failure in its data. 956 * 957 * The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like 958 * %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed 959 * instead of allocated. 960 * An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation. 961 * 962 * To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources 963 * for the lifetime of the fd or @handle. 964 * In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources 965 * for the duration of a bus generation. 966 * 967 * @channels is a host-endian bitfield with the least significant bit 968 * representing channel 0 and the most significant bit representing channel 63: 969 * 1ULL << c for each channel c that is a candidate for (de)allocation. 970 * 971 * @bandwidth is expressed in bandwidth allocation units, i.e. the time to send 972 * one quadlet of data (payload or header data) at speed S1600. 973 */ 974 struct fw_cdev_allocate_iso_resource { 975 __u64 closure; 976 __u64 channels; 977 __u32 bandwidth; 978 __u32 handle; 979 }; 980 981 /** 982 * struct fw_cdev_send_stream_packet - send an asynchronous stream packet 983 * @length: Length of outgoing payload, in bytes 984 * @tag: Data format tag 985 * @channel: Isochronous channel to transmit to 986 * @sy: Synchronization code 987 * @closure: Passed back to userspace in the response event 988 * @data: Userspace pointer to payload 989 * @generation: The bus generation where packet is valid 990 * @speed: Speed to transmit at 991 * 992 * The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet 993 * to every device which is listening to the specified channel. The kernel 994 * writes an &fw_cdev_event_response event which indicates success or failure of 995 * the transmission. 996 */ 997 struct fw_cdev_send_stream_packet { 998 __u32 length; 999 __u32 tag; 1000 __u32 channel; 1001 __u32 sy; 1002 __u64 closure; 1003 __u64 data; 1004 __u32 generation; 1005 __u32 speed; 1006 }; 1007 1008 /** 1009 * struct fw_cdev_send_phy_packet - send a PHY packet 1010 * @closure: Passed back to userspace in the PHY-packet-sent event 1011 * @data: First and second quadlet of the PHY packet 1012 * @generation: The bus generation where packet is valid 1013 * 1014 * The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes 1015 * on the same card as this device. After transmission, an 1016 * %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated. 1017 * 1018 * The payload @data\[\] shall be specified in host byte order. Usually, 1019 * @data\[1\] needs to be the bitwise inverse of @data\[0\]. VersaPHY packets 1020 * are an exception to this rule. 1021 * 1022 * The ioctl is only permitted on device files which represent a local node. 1023 */ 1024 struct fw_cdev_send_phy_packet { 1025 __u64 closure; 1026 __u32 data[2]; 1027 __u32 generation; 1028 }; 1029 1030 /** 1031 * struct fw_cdev_receive_phy_packets - start reception of PHY packets 1032 * @closure: Passed back to userspace in phy packet events 1033 * 1034 * This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to 1035 * incoming PHY packets from any node on the same bus as the device. 1036 * 1037 * The ioctl is only permitted on device files which represent a local node. 1038 */ 1039 struct fw_cdev_receive_phy_packets { 1040 __u64 closure; 1041 }; 1042 1043 #define FW_CDEV_VERSION 3 /* Meaningless legacy macro; don't use it. */ 1044 1045 #endif /* _LINUX_FIREWIRE_CDEV_H */ 1046