| /external/u-boot/arch/powerpc/cpu/mpc85xx/ |
| D | cmd_errata.c | 126 puts("Work-around for Erratum A007212 enabled\n"); in check_erratum_a007212()
143 puts("Work-around for Erratum SATA A001 enabled\n"); in do_errata()
149 puts("Work-around for Erratum SERDES8 enabled\n"); in do_errata()
152 puts("Work-around for Erratum SERDES9 enabled\n"); in do_errata()
155 puts("Work-around for Erratum SERDES-A005 enabled\n"); in do_errata()
159 puts("Work-around for Erratum CPU22 enabled\n"); in do_errata()
168 puts("Work-around for Erratum CPU-A011 enabled\n"); in do_errata()
171 puts("Work-around for Erratum CPU-A003999 enabled\n"); in do_errata()
174 puts("Work-around for Erratum DDR-A003474 enabled\n"); in do_errata()
177 puts("Work-around for DDR MSYNC_IN Erratum enabled\n"); in do_errata()
[all …]
|
| D | cpu.c | 111 puts("Unicore software on multiprocessor system!!\n" in checkcpu()
117 puts("CPU: "); in checkcpu()
122 puts(cpu->name); in checkcpu()
124 puts("E"); in checkcpu()
137 puts("e500"); in checkcpu()
140 puts("e500mc"); in checkcpu()
143 puts("e5500"); in checkcpu()
146 puts("e6500"); in checkcpu()
149 puts("Unknown"); in checkcpu()
164 puts("Single Source Clock Configuration\n"); in checkcpu()
[all …]
|
| /external/ltp/testcases/open_posix_testsuite/conformance/interfaces/strftime/ |
| D | 1-1.c | 38 puts("Test Failed: \%a doesn't equal at least 3 bytes"); in main()
41 puts("PASS"); in main()
47 puts("Test Failed: \%A doesn't equal to 6 bytes"); in main()
50 puts("PASS"); in main()
56 puts("Test Failed: \%b doesn't equal to 3 bytes"); in main()
59 puts("PASS"); in main()
65 puts("Test Failed: \%B is less than3 bytes"); in main()
68 puts("PASS"); in main()
85 puts("Test Failed: \%C doesn't equal at least 2 bytes"); in main()
88 puts("PASS"); in main()
[all …]
|
| D | 2-1.c | 50 puts("Test Failed: \%EC doesn't equal to 2 bytes"); in main()
53 puts("PASS"); in main()
70 puts("Test Failed: \%EX doesn't equal to 3 bytes"); in main()
73 puts("PASS"); in main()
90 puts("Test Failed: \%EY doesn't equal at least 4 bytes"); in main()
93 puts("PASS"); in main()
99 puts("Test Failed: \%Od doesn't equal at least 2 bytes"); in main()
102 puts("PASS"); in main()
108 puts("Test Failed: \%Oe doesn't equal at least 2 bytes"); in main()
111 puts("PASS"); in main()
[all …]
|
| /external/libcups/cups/ |
| D | testcups.c | 167 puts("No password entered."); in main()
184 puts(buffer); in main()
217 puts("Unable to start document!"); in main()
227 puts("Unable to write bytes!"); in main()
240 puts("Unable to finish document!"); in main()
246 puts("Usage:"); in main()
247 puts(""); in main()
248 puts("Run basic unit tests:"); in main()
249 puts(""); in main()
250 puts(" ./testcups"); in main()
[all …]
|
| D | testppd.c | 190 puts("PASS"); in main()
207 puts("FAIL (not found)"); in main()
215 puts("PASS"); in main()
221 puts("FAIL (not found)"); in main()
229 puts("PASS"); in main()
235 puts("FAIL (not found)"); in main()
243 puts("PASS"); in main()
252 puts("PASS"); in main()
258 puts("PASS"); in main()
268 puts("PASS"); in main()
[all …]
|
| D | testfile.c | 97 puts("FAIL"); in main()
108 puts("PASS"); in main()
116 puts("PASS"); in main()
128 puts("FAIL"); in main()
133 puts("PASS"); in main()
143 puts("PASS"); in main()
148 puts("FAIL"); in main()
153 puts("PASS"); in main()
162 puts("PASS"); in main()
184 puts("FAIL"); in main()
[all …]
|
| D | testi18n.c | 154 puts("Usage: ./testi18n [filename charset]"); in main()
226 puts("PASS"); in main()
251 puts("PASS"); in main()
270 puts("PASS"); in main()
290 puts("FAIL (results do not match)"); in main()
297 puts("FAIL (replacement characters do not work!)"); in main()
301 puts("PASS"); in main()
311 puts("FAIL"); in main()
320 puts("FAIL (unknown character)"); in main()
324 puts("PASS"); in main()
[all …]
|
| D | testarray.c | 71 puts("PASS"); in main()
74 puts("FAIL (returned NULL, expected pointer)"); in main()
84 puts("PASS"); in main()
100 puts("FAIL (\"One Fish\")"); in main()
107 puts("FAIL (\"Two Fish\")"); in main()
114 puts("FAIL (\"Red Fish\")"); in main()
121 puts("FAIL (\"Blue Fish\")"); in main()
125 puts("PASS"); in main()
136 puts("PASS"); in main()
150 puts("PASS"); in main()
[all …]
|
| D | testpwg.c | 55 puts("Usage: ./testpwg filename.ppd [jobfile]"); in main()
75 puts("PASS"); in main()
80 puts("FAIL"); in main()
85 puts("PASS"); in main()
120 puts("FAIL (Not Found)"); in main()
147 puts("PASS"); in main()
153 puts("FAIL (not found)"); in main()
167 puts("PASS"); in main()
172 puts("FAIL (not found)"); in main()
186 puts("FAIL (not found)"); in main()
[all …]
|
| /external/u-boot/drivers/ddr/fsl/ |
| D | util.c | 205 puts(" (DDR not enabled)\n"); in print_ddr_info()
209 puts(" (DDR"); in print_ddr_info()
213 puts("1"); in print_ddr_info()
216 puts("2"); in print_ddr_info()
219 puts("3"); in print_ddr_info()
222 puts("4"); in print_ddr_info()
225 puts("?"); in print_ddr_info()
230 puts(", 32-bit"); in print_ddr_info()
232 puts(", 16-bit"); in print_ddr_info()
234 puts(", 64-bit"); in print_ddr_info()
[all …]
|
| /external/u-boot/cmd/ |
| D | pcmcia.c | 107 puts (indent); in print_funcid()
110 puts (" Multi-Function"); in print_funcid()
113 puts (" Memory"); in print_funcid()
116 puts (" Serial Port"); in print_funcid()
119 puts (" Parallel Port"); in print_funcid()
122 puts (" Fixed Disk"); in print_funcid()
125 puts (" Video Adapter"); in print_funcid()
128 puts (" Network Adapter"); in print_funcid()
131 puts (" AIMS Card"); in print_funcid()
134 puts (" SCSI Adapter"); in print_funcid()
[all …]
|
| D | i2c.c | 162 puts("No I2C bus selected\n"); in i2c_get_cur_bus()
594 puts (" "); in do_i2c_md()
598 puts ("."); in do_i2c_md()
968 puts ("Valid chip addresses:"); in do_i2c_probe()
997 puts ("Excluded chip addresses:"); in do_i2c_probe()
1115 puts ("25 ns\n"); in print_ddr2_tcyc()
1118 puts ("33 ns\n"); in print_ddr2_tcyc()
1121 puts ("66 ns\n"); in print_ddr2_tcyc()
1124 puts ("75 ns\n"); in print_ddr2_tcyc()
1127 puts ("?? ns\n"); in print_ddr2_tcyc()
[all …]
|
| /external/libcap-ng/libcap-ng-0.7/src/test/ |
| D | lib_test.c | 36 puts("Doing basic bit tests..."); in main()
39 puts("Failed clearing capabilities"); in main()
45 puts("Failed filling capabilities"); in main()
57 puts("Failed restoring capabilities"); in main()
66 puts("Failed update test 1"); in main()
71 puts("Failed have capability test 1"); in main()
77 puts("Failed have capabilities test 1"); in main()
85 puts("Failed bset update test 2"); in main()
90 puts("Failed bset have capability test 2"); in main()
96 puts("Failed bset have capabilities test 2"); in main()
[all …]
|
| /external/u-boot/board/freescale/ls1012ardb/ |
| D | ls1012ardb.c | 33 puts("Board: LS1012ARDB "); in checkboard()
43 puts("Version"); in checkboard()
46 puts(": RevA"); in checkboard()
49 puts(": RevB"); in checkboard()
52 puts(": RevC"); in checkboard()
55 puts(": RevC1"); in checkboard()
58 puts(": RevC2"); in checkboard()
61 puts(": RevD"); in checkboard()
64 puts(": RevE"); in checkboard()
67 puts(": unknown"); in checkboard()
[all …]
|
| /external/elfutils/tests/ |
| D | show-die-info.c | 101 puts (""); in handle()
113 puts ("************* DW_AT_low_pc verify failed ************"); in handle()
115 puts ("************* DW_AT_low_pc form failed ************"); in handle()
117 puts ("************* DW_AT_low_pc form (2) failed ************"); in handle()
119 puts ("************* DW_AT_low_pc attr failed ************"); in handle()
130 puts ("************* DW_AT_high_pc verify failed ************"); in handle()
132 puts ("************* DW_AT_high_pc form failed ************"); in handle()
134 puts ("************* DW_AT_high_pc form (2) failed ************"); in handle()
136 puts ("************* DW_AT_high_pc attr failed ************"); in handle()
148 puts ("************* DW_AT_byte_size verify failed ************"); in handle()
[all …]
|
| /external/u-boot/board/toradex/apalis_imx6/ |
| D | pf0100.c | 37 puts("PMIC: "); in pmic_init()
40 puts("i2c bus failed\n"); in pmic_init()
45 puts("i2c pmic devid read failed\n"); in pmic_init()
49 puts("i2c pmic revid read failed\n"); in pmic_init()
73 puts("i2c write failed\n"); in pmic_init()
90 puts("i2c write failed\n"); in pmic_init()
108 puts("i2c write failed\n"); in pmic_init()
112 puts("i2c fuse_por read failed\n"); in pmic_init()
119 puts("i2c fuse_por read failed\n"); in pmic_init()
126 puts("i2c fuse_por read failed\n"); in pmic_init()
[all …]
|
| /external/u-boot/arch/arm/mach-uniphier/ |
| D | cpu-info.c | 23 puts("SoC: "); in print_cpuinfo()
27 puts("LD4"); in print_cpuinfo()
31 puts("Pro4"); in print_cpuinfo()
34 puts("sLD8"); in print_cpuinfo()
37 puts("Pro5"); in print_cpuinfo()
40 puts("PXs2"); in print_cpuinfo()
43 puts("LD6b"); in print_cpuinfo()
46 puts("LD11"); in print_cpuinfo()
49 puts("LD20"); in print_cpuinfo()
52 puts("PXs3"); in print_cpuinfo()
|
| /external/u-boot/board/toradex/colibri_imx6/ |
| D | pf0100.c | 36 puts("PMIC: "); in pmic_init()
39 puts("i2c bus failed\n"); in pmic_init()
44 puts("i2c pmic devid read failed\n"); in pmic_init()
48 puts("i2c pmic revid read failed\n"); in pmic_init()
72 puts("i2c write failed\n"); in pmic_init()
89 puts("i2c write failed\n"); in pmic_init()
107 puts("i2c write failed\n"); in pmic_init()
111 puts("i2c fuse_por read failed\n"); in pmic_init()
118 puts("i2c fuse_por read failed\n"); in pmic_init()
125 puts("i2c fuse_por read failed\n"); in pmic_init()
[all …]
|
| /external/mesa3d/src/gallium/drivers/ddebug/ |
| D | dd_screen.c | 441 puts("Gallium driver debugger"); in ddebug_screen_create()
442 puts(""); in ddebug_screen_create()
443 puts("Usage:"); in ddebug_screen_create()
444 puts(""); in ddebug_screen_create()
445 …puts(" GALLIUM_DDEBUG=\"[<timeout in ms>] [(always|apitrace <call#)] [flush] [transfers] [verbose… in ddebug_screen_create()
446 puts(" GALLIUM_DDEBUG_SKIP=[count]"); in ddebug_screen_create()
447 puts(""); in ddebug_screen_create()
448 puts("Dump context and driver information of draw calls into"); in ddebug_screen_create()
449 puts("$HOME/"DD_DIR"/. By default, watch for GPU hangs and only dump information"); in ddebug_screen_create()
450 puts("about draw calls related to the hang."); in ddebug_screen_create()
[all …]
|
| /external/u-boot/lib/efi/ |
| D | efi_stub.c | 79 void puts(const char *str) in puts() function
194 puts("\ngdt: "); in get_codeseg32()
196 puts(", addr: "); in get_codeseg32()
202 puts("\n"); in get_codeseg32()
204 puts(": "); in get_codeseg32()
206 puts(" "); in get_codeseg32()
209 puts("\n "); in get_codeseg32()
210 puts("32-bit code segment: "); in get_codeseg32()
212 puts("\n "); in get_codeseg32()
214 puts("page_table: "); in get_codeseg32()
[all …]
|
| /external/u-boot/arch/microblaze/cpu/ |
| D | exception.c | 25 puts("Unaligned data access exception\n"); in _hw_exception_handler()
28 puts("Illegal op-code exception\n"); in _hw_exception_handler()
31 puts("Instruction bus error exception\n"); in _hw_exception_handler()
34 puts("Data bus error exception\n"); in _hw_exception_handler()
37 puts("Divide by zero exception\n"); in _hw_exception_handler()
41 puts("Priviledged or stack protection violation exception\n"); in _hw_exception_handler()
44 puts("Exception in delay slot\n"); in _hw_exception_handler()
48 puts("Undefined cause\n"); in _hw_exception_handler()
60 puts("User vector_exception\n"); in _exception_handler()
|
| /external/u-boot/arch/powerpc/cpu/mpc86xx/ |
| D | cpu.c | 48 puts("Unicore software on multiprocessor system!!\n" in checkcpu()
52 puts("CPU: "); in checkcpu()
56 puts(cpu->name); in checkcpu()
59 puts("Core: "); in checkcpu()
67 puts("\n Core1Translation Enabled"); in checkcpu()
74 puts("Clock Configuration:\n"); in checkcpu()
88 puts("L1: D-cache 32 KiB enabled\n"); in checkcpu()
89 puts(" I-cache 32 KiB enabled\n"); in checkcpu()
91 puts("L2: "); in checkcpu()
94 puts("256"); in checkcpu()
[all …]
|
| /external/libcups/filter/ |
| D | testraster.c | 235 puts("Usage: testraster [-o name=value ...] [filename.ppd ...]"); in main()
236 puts(" testraster [filename.ras ...]"); in main()
243 puts("Usage: testraster [-o name=value ...] [filename.ppd ...]"); in main()
244 puts(" testraster [filename.ras ...]"); in main()
257 puts("Usage: testraster [-o name=value ...] [filename.ppd ...]"); in main()
258 puts(" testraster [filename.ras ...]"); in main()
294 puts("FAIL (bad PPD file)"); in do_ppd_tests()
305 puts("FAIL (error from function)"); in do_ppd_tests()
306 puts(cupsRasterErrorString()); in do_ppd_tests()
312 puts("PASS"); in do_ppd_tests()
[all …]
|
| /external/u-boot/board/CZ.NIC/turris_omnia/ |
| D | turris_omnia.c | 96 puts("SERDES0 card detect: "); in omnia_detect_sata()
99 puts("Cannot find MCU bus!\n"); in omnia_detect_sata()
105 puts("Cannot get MCU chip!\n"); in omnia_detect_sata()
116 puts("I2C read failed! Default PEX\n"); in omnia_detect_sata()
121 puts("NONE\n"); in omnia_detect_sata()
126 puts("SATA\n"); in omnia_detect_sata()
129 puts("PEX\n"); in omnia_detect_sata()
160 puts("Cannot find EEPROM bus\n"); in omnia_read_eeprom()
166 puts("Cannot get EEPROM chip\n"); in omnia_read_eeprom()
176 puts("I2C EEPROM missing magic number!\n"); in omnia_read_eeprom()
[all …]
|