/external/u-boot/board/kmc/kzm9g/ |
D | kzm9g.c | 302 gpio_request(GPIO_FN_SCIFA4_TXD, NULL); in board_init() 303 gpio_request(GPIO_FN_SCIFA4_RXD, NULL); in board_init() 304 gpio_request(GPIO_FN_SCIFA4_RTS_, NULL); in board_init() 305 gpio_request(GPIO_FN_SCIFA4_CTS_, NULL); in board_init() 308 gpio_request(GPIO_PORT224, NULL); in board_init() 312 gpio_request(GPIO_FN_CS4_, NULL); in board_init() 315 gpio_request(GPIO_FN_MMCCLK0, NULL); in board_init() 316 gpio_request(GPIO_FN_MMCCMD0_PU, NULL); in board_init() 317 gpio_request(GPIO_FN_MMCD0_0_PU, NULL); in board_init() 318 gpio_request(GPIO_FN_MMCD0_1_PU, NULL); in board_init() [all …]
|
/external/u-boot/board/siemens/corvus/ |
D | board.c | 40 gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "nand ena"); in corvus_request_gpio() 41 gpio_request(CONFIG_SYS_NAND_READY_PIN, "nand rdy"); in corvus_request_gpio() 42 gpio_request(AT91_PIN_PD7, "d0"); in corvus_request_gpio() 43 gpio_request(AT91_PIN_PD8, "d1"); in corvus_request_gpio() 44 gpio_request(AT91_PIN_PA12, "d2"); in corvus_request_gpio() 45 gpio_request(AT91_PIN_PA13, "d3"); in corvus_request_gpio() 46 gpio_request(AT91_PIN_PA15, "d4"); in corvus_request_gpio() 47 gpio_request(AT91_PIN_PB7, "recovery button"); in corvus_request_gpio() 48 gpio_request(AT91_PIN_PD1, "USB0"); in corvus_request_gpio() 49 gpio_request(AT91_PIN_PD3, "USB1"); in corvus_request_gpio() [all …]
|
/external/u-boot/board/atmark-techno/armadillo-800eva/ |
D | armadillo-800eva.c | 283 gpio_request(GPIO_FN_ET_CRS, NULL); in board_init() 284 gpio_request(GPIO_FN_ET_MDC, NULL); in board_init() 285 gpio_request(GPIO_FN_ET_MDIO, NULL); in board_init() 286 gpio_request(GPIO_FN_ET_TX_ER, NULL); in board_init() 287 gpio_request(GPIO_FN_ET_RX_ER, NULL); in board_init() 288 gpio_request(GPIO_FN_ET_ERXD0, NULL); in board_init() 289 gpio_request(GPIO_FN_ET_ERXD1, NULL); in board_init() 290 gpio_request(GPIO_FN_ET_ERXD2, NULL); in board_init() 291 gpio_request(GPIO_FN_ET_ERXD3, NULL); in board_init() 292 gpio_request(GPIO_FN_ET_TX_CLK, NULL); in board_init() [all …]
|
/external/u-boot/board/bosch/shc/ |
D | board.c | 79 gpio_request(LED_PWR_BL_GPIO, "LED PWR BL"); in shc_request_gpio() 80 gpio_request(LED_PWR_RD_GPIO, "LED PWR RD"); in shc_request_gpio() 81 gpio_request(RESET_GPIO, "reset"); in shc_request_gpio() 82 gpio_request(WIFI_REGEN_GPIO, "WIFI REGEN"); in shc_request_gpio() 83 gpio_request(WIFI_RST_GPIO, "WIFI rst"); in shc_request_gpio() 84 gpio_request(ZIGBEE_RST_GPIO, "ZigBee rst"); in shc_request_gpio() 85 gpio_request(BIDCOS_RST_GPIO, "BIDCOS rst"); in shc_request_gpio() 86 gpio_request(ENOC_RST_GPIO, "ENOC rst"); in shc_request_gpio() 88 gpio_request(LED_PWR_GN_GPIO, "LED PWR GN"); in shc_request_gpio() 89 gpio_request(LED_CONN_BL_GPIO, "LED CONN BL"); in shc_request_gpio() [all …]
|
/external/u-boot/board/teejet/mt_ventoux/ |
D | mt_ventoux.c | 146 gpio_request(FPGA_RESET, "FPGA_RESET"); in fpga_pre_config_fn() 148 gpio_request(FPGA_PROG, "FPGA_PROG"); in fpga_pre_config_fn() 150 gpio_request(FPGA_CCLK, "FPGA_CCLK"); in fpga_pre_config_fn() 152 gpio_request(FPGA_DIN, "FPGA_DIN"); in fpga_pre_config_fn() 154 gpio_request(FPGA_INIT, "FPGA_INIT"); in fpga_pre_config_fn() 156 gpio_request(FPGA_DONE, "FPGA_DONE"); in fpga_pre_config_fn() 237 gpio_request(BUZZER, "BUZZER_MUTE"); in board_init() 238 gpio_request(SPEAKER, "SPEAKER"); in board_init() 243 gpio_request(USB1_PWR, "USB1_PWR"); in board_init() 244 gpio_request(USB2_PWR, "USB2_PWR"); in board_init() [all …]
|
/external/u-boot/board/tqc/tqma6/ |
D | tqma6_wru4.c | 123 ret = gpio_request(USDHC2_CD_GPIO, "mmc-cd"); in tqma6_bb_board_mmc_init() 126 ret = gpio_request(USDHC2_WP_GPIO, "mmc-wp"); in tqma6_bb_board_mmc_init() 176 ret = gpio_request(ENET_PHY_RESET_GPIO, "phy-reset"); in setup_iomuxc_enet() 236 ret = gpio_request(GPIO_USB_H_PWR, "usb-h-pwr"); in gpio_init() 239 ret = gpio_request(GPIO_USB_OTG_PWR, "usb-otg-pwr"); in gpio_init() 242 ret = gpio_request(GPIO_PCIE_RST, "pcie-reset"); in gpio_init() 245 ret = gpio_request(GPIO_UART1_PWRON, "uart1-pwr"); in gpio_init() 248 ret = gpio_request(GPIO_UART2_PWRON, "uart2-pwr"); in gpio_init() 251 ret = gpio_request(GPIO_UART3_PWRON, "uart3-pwr"); in gpio_init() 316 ret = gpio_request(WRU4_USB_H1_PWR, "usb-h1-pwr"); in board_ehci_hcd_init() [all …]
|
/external/u-boot/board/gateworks/gw_ventana/ |
D | common.c | 1017 gpio_request(gpio_cfg[board].rs232_en, "rs232_en#"); in setup_iomux_gpio() 1026 gpio_request(gpio_cfg[board].pcie_rst, "pci_rst#"); in setup_iomux_gpio() 1034 gpio_request(gpio_cfg[board].leds[i], name); in setup_iomux_gpio() 1041 gpio_request(gpio_cfg[board].msata_en, "msata_en"); in setup_iomux_gpio() 1047 gpio_request(gpio_cfg[board].mezz_pwren, "mezz_pwr"); in setup_iomux_gpio() 1051 gpio_request(gpio_cfg[board].mezz_irq, "mezz_irq#"); in setup_iomux_gpio() 1057 gpio_request(gpio_cfg[board].rs485en, "rs485_en"); in setup_iomux_gpio() 1063 gpio_request(gpio_cfg[board].gps_shdn, "gps_shdn"); in setup_iomux_gpio() 1069 gpio_request(gpio_cfg[board].vidin_en, "anavidin_en"); in setup_iomux_gpio() 1075 gpio_request(gpio_cfg[board].dioi2c_en, "dioi2c_dis#"); in setup_iomux_gpio() [all …]
|
/external/u-boot/board/calao/usb_a9263/ |
D | usb_a9263.c | 55 gpio_request(CONFIG_SYS_NAND_READY_PIN, "NAND ready/busy"); in usb_a9263_nand_hw_init() 59 gpio_request(CONFIG_SYS_NAND_ENABLE_PIN, "NAND enable"); in usb_a9263_nand_hw_init() 77 gpio_request(GPIO_PIN_PC(25), "PHY mode"); in usb_a9263_macb_hw_init() 80 gpio_request(GPIO_PIN_PE(25), "PHY ADDR0"); in usb_a9263_macb_hw_init() 83 gpio_request(GPIO_PIN_PE(26), "PHY ADDR1"); in usb_a9263_macb_hw_init()
|
/external/u-boot/board/aristainetos/ |
D | aristainetos-v1.c | 254 gpio_request(IMX_GPIO_NR(1, 7), "i2c4_scl"); in setup_i2c4() 256 gpio_request(IMX_GPIO_NR(1, 8), "i2c4_sda"); in setup_i2c4() 263 gpio_request(IMX_GPIO_NR(2, 13), "LED ena"); in setup_board_gpio() 266 gpio_request(IMX_GPIO_NR(1, 3), "LED yellow"); in setup_board_gpio() 268 gpio_request(IMX_GPIO_NR(1, 4), "LED red"); in setup_board_gpio() 270 gpio_request(IMX_GPIO_NR(1, 5), "LED green"); in setup_board_gpio() 272 gpio_request(IMX_GPIO_NR(1, 6), "LED blue"); in setup_board_gpio()
|
D | aristainetos-v2.c | 618 gpio_request(IMX_GPIO_NR(2, 13), "LED ena"); /* 25 */ in setup_board_gpio() 623 gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */ in setup_board_gpio() 625 gpio_request(IMX_GPIO_NR(2, 28), "LED red"); /* 60 */ in setup_board_gpio() 627 gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */ in setup_board_gpio() 629 gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */ in setup_board_gpio() 632 gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */ in setup_board_gpio() 634 gpio_request(IMX_GPIO_NR(5, 0), "LED red"); /* 128 */ in setup_board_gpio() 636 gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */ in setup_board_gpio() 638 gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */ in setup_board_gpio() 659 gpio_request(IMX_GPIO_NR(7, 6), "bootsel0"); in board_late_init() [all …]
|
/external/u-boot/board/isee/igep00x0/ |
D | igep00x0.c | 56 gpio_request(IGEP0030_USB_TRANSCEIVER_RESET, in get_board_revision() 60 gpio_request(GPIO_IGEP00X0_BOARD_DETECTION, "igep00x0_board_detection"); in get_board_revision() 65 gpio_request(GPIO_IGEP00X0_REVISION_DETECTION, in get_board_revision() 89 if (!gpio_request(gpio, "eth nrst")) { in reset_net_chip() 181 gpio_request(IGEP0020_GPIO_LED, "igep0020_gpio_led"); in set_led() 186 gpio_request(IGEP0030_GPIO_LED, "igep0030_gpio_led"); in set_led()
|
/external/u-boot/board/amazon/kc1/ |
D | kc1.c | 98 gpio_request(KC1_GPIO_USB_ID, "USB_ID"); in misc_init_r() 141 gpio_request(KC1_GPIO_MBID0, "MBID0"); in get_board_rev() 142 gpio_request(KC1_GPIO_MBID1, "MBID1"); in get_board_rev() 143 gpio_request(KC1_GPIO_MBID2, "MBID2"); in get_board_rev() 144 gpio_request(KC1_GPIO_MBID3, "MBID3"); in get_board_rev()
|
/external/u-boot/board/k+p/kp_imx53/ |
D | kp_imx53.c | 51 gpio_request(VBUS_PWR_EN, "VBUS_PWR_EN"); in board_ehci_hcd_init() 146 gpio_request(BOOSTER_OFF, "BOOSTER_OFF"); in setup_ups() 173 gpio_request(PHY_nRST, "PHY_nRST"); in eth_phy_reset() 184 gpio_request(LCD_BACKLIGHT, "LCD_BACKLIGHT"); in board_disable_display() 190 gpio_request(KEY1, "KEY1_GPIO"); in board_misc_setup()
|
/external/u-boot/board/toradex/apalis-tk1/ |
D | apalis-tk1.c | 134 gpio_request(LAN_DEV_OFF_N, "LAN_DEV_OFF_N"); in tegra_pcie_board_init() 135 gpio_request(LAN_RESET_N, "LAN_RESET_N"); in tegra_pcie_board_init() 136 gpio_request(LAN_WAKE_N, "LAN_WAKE_N"); in tegra_pcie_board_init() 139 gpio_request(PEX_PERST_N, "PEX_PERST_N"); in tegra_pcie_board_init() 140 gpio_request(RESET_MOCI_CTRL, "RESET_MOCI_CTRL"); in tegra_pcie_board_init()
|
/external/u-boot/board/samsung/odroid/ |
D | odroid.c | 363 gpio_request(EXYNOS4X12_GPIO_K12, "eMMC Reset"); in board_gpio_init() 370 gpio_request(EXYNOS4X12_GPIO_D00, "FAN Control"); in board_gpio_init() 377 gpio_request(EXYNOS4X12_GPIO_L20, "OTG Vbus"); in board_gpio_init() 384 gpio_request(EXYNOS4X12_GPIO_X31, "OTG INT"); in board_gpio_init() 391 gpio_request(EXYNOS4X12_GPIO_C10, "Blue LED"); in board_gpio_init() 397 gpio_request(EXYNOS4X12_GPIO_X30, "USB3503A RefFreq"); in board_gpio_init() 400 gpio_request(EXYNOS4X12_GPIO_X34, "USB3503A Connect"); in board_gpio_init() 403 gpio_request(EXYNOS4X12_GPIO_X35, "USB3503A Reset"); in board_gpio_init()
|
/external/u-boot/board/avionic-design/common/ |
D | tamonten-ng.c | 44 gpio_request(TEGRA_GPIO(V, 2), "ALIVE"); in gpio_early_init() 48 gpio_request(TEGRA_GPIO(I, 4), "nRST_PERIPH"); in gpio_early_init() 75 gpio_request(TEGRA_GPIO(J, 2), "EN_3V3_EMMC"); in board_sdmmc_voltage_init()
|
/external/u-boot/board/renesas/stout/ |
D | cpld.c | 93 gpio_request(SCLK, "SCLK"); in cpld_init() 94 gpio_request(SSTBZ, "SSTBZ"); in cpld_init() 95 gpio_request(MOSI, "MOSI"); in cpld_init() 96 gpio_request(MISO, "MISO"); in cpld_init()
|
/external/u-boot/drivers/video/ |
D | hitachi_tx18d42vm_lcd.c | 59 if (gpio_request(cs, "tx18d42vm-spi-cs") != 0 || in hitachi_tx18d42vm_init() 60 gpio_request(clk, "tx18d42vm-spi-clk") != 0 || in hitachi_tx18d42vm_init() 61 gpio_request(mosi, "tx18d42vm-spi-mosi") != 0) { in hitachi_tx18d42vm_init()
|
D | ssd2828.c | 194 if (gpio_request(cfg->csx_pin, "ssd2828_csx")) { in ssd2828_enable_gpio() 198 if (gpio_request(cfg->sck_pin, "ssd2828_sck")) { in ssd2828_enable_gpio() 203 if (gpio_request(cfg->sdi_pin, "ssd2828_sdi")) { in ssd2828_enable_gpio() 209 if (gpio_request(cfg->reset_pin, "ssd2828_reset")) { in ssd2828_enable_gpio() 216 if (cfg->sdo_pin != -1 && gpio_request(cfg->sdo_pin, "ssd2828_sdo")) { in ssd2828_enable_gpio()
|
/external/u-boot/board/corscience/tricorder/ |
D | led.c | 45 gpio_request(toggle_gpio, ""); in __led_toggle() 55 gpio_request(TRICORDER_STATUS_LED_GREEN, ""); in __led_set() 62 gpio_request(TRICORDER_STATUS_LED_YELLOW, ""); in __led_set()
|
/external/u-boot/board/samsung/goni/ |
D | goni.c | 40 gpio_request(S5PC110_GPIO_J43, "i2c_clk"); in i2c_init_board() 41 gpio_request(S5PC110_GPIO_J40, "i2c_data"); in i2c_init_board() 81 gpio_request(S5PC110_GPIO_J27, "massmemory_en"); in board_mmc_init() 110 gpio_request(S5PC110_GPIO_H34, "t_flash_detect"); in board_mmc_init()
|
/external/u-boot/board/overo/ |
D | overo.c | 89 if (!gpio_request(130, "") && !gpio_request(139, "")) { in get_sdio2_config() 333 if (!gpio_request(64, "")) { in reset_net_chip() 405 if (!gpio_request(GUMSTIX_GPIO_USBH_CPEN, "usbh_cpen")) in ehci_hcd_init()
|
/external/u-boot/board/samsung/trats2/ |
D | trats2.c | 46 gpio_request(pin, str); in check_hw_revision() 55 gpio_request(pin, str); in check_hw_revision() 307 gpio_request(EXYNOS4X12_GPIO_C01, "lcd_2v2_en"); in exynos_lcd_power_on() 321 gpio_request(EXYNOS4X12_GPIO_F21, "lcd_reset"); in exynos_reset_lcd()
|
/external/u-boot/board/freescale/mx6slevk/ |
D | mx6slevk.c | 152 gpio_request(ETH_PHY_POWER, "eth_pwr"); in setup_iomux_fec() 236 gpio_request(IMX_GPIO_NR(4, 11), "spi_cs"); in board_init() 275 gpio_request(USDHC1_CD_GPIO, "cd1_gpio"); in board_mmc_getcd() 279 gpio_request(USDHC2_CD_GPIO, "cd2_gpio"); in board_mmc_getcd() 283 gpio_request(USDHC3_CD_GPIO, "cd3_gpio"); in board_mmc_getcd()
|
/external/u-boot/board/technexion/tao3530/ |
D | tao3530.c | 30 ret = gpio_request(65, ""); in tao3530_revision() 37 ret = gpio_request(1, ""); in tao3530_revision() 84 gpio_request(111, ""); in get_board_mem_timings()
|