1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * Copyright (c) 1999-2002 Vojtech Pavlik 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 as published by 7 * the Free Software Foundation. 8 */ 9 #ifndef _UAPI_INPUT_H 10 #define _UAPI_INPUT_H 11 12 13 #ifndef __KERNEL__ 14 #include <sys/time.h> 15 #include <sys/ioctl.h> 16 #include <sys/types.h> 17 #include <linux/types.h> 18 #endif 19 20 #include "input-event-codes.h" 21 22 /* 23 * The event structure itself 24 * Note that __USE_TIME_BITS64 is defined by libc based on 25 * application's request to use 64 bit time_t. 26 */ 27 28 struct input_event { 29 #if (__BITS_PER_LONG != 32 || !defined(__USE_TIME_BITS64)) && !defined(__KERNEL__) 30 struct timeval time; 31 #define input_event_sec time.tv_sec 32 #define input_event_usec time.tv_usec 33 #else 34 __kernel_ulong_t __sec; 35 #if defined(__sparc__) && defined(__arch64__) 36 unsigned int __usec; 37 #else 38 __kernel_ulong_t __usec; 39 #endif 40 #define input_event_sec __sec 41 #define input_event_usec __usec 42 #endif 43 __u16 type; 44 __u16 code; 45 __s32 value; 46 }; 47 48 /* 49 * Protocol version. 50 */ 51 52 #define EV_VERSION 0x010001 53 54 /* 55 * IOCTLs (0x00 - 0x7f) 56 */ 57 58 struct input_id { 59 __u16 bustype; 60 __u16 vendor; 61 __u16 product; 62 __u16 version; 63 }; 64 65 /** 66 * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls 67 * @value: latest reported value for the axis. 68 * @minimum: specifies minimum value for the axis. 69 * @maximum: specifies maximum value for the axis. 70 * @fuzz: specifies fuzz value that is used to filter noise from 71 * the event stream. 72 * @flat: values that are within this value will be discarded by 73 * joydev interface and reported as 0 instead. 74 * @resolution: specifies resolution for the values reported for 75 * the axis. 76 * 77 * Note that input core does not clamp reported values to the 78 * [minimum, maximum] limits, such task is left to userspace. 79 * 80 * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z) 81 * is reported in units per millimeter (units/mm), resolution 82 * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported 83 * in units per radian. 84 * When INPUT_PROP_ACCELEROMETER is set the resolution changes. 85 * The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in 86 * in units per g (units/g) and in units per degree per second 87 * (units/deg/s) for rotational axes (ABS_RX, ABS_RY, ABS_RZ). 88 */ 89 struct input_absinfo { 90 __s32 value; 91 __s32 minimum; 92 __s32 maximum; 93 __s32 fuzz; 94 __s32 flat; 95 __s32 resolution; 96 }; 97 98 /** 99 * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls 100 * @scancode: scancode represented in machine-endian form. 101 * @len: length of the scancode that resides in @scancode buffer. 102 * @index: index in the keymap, may be used instead of scancode 103 * @flags: allows to specify how kernel should handle the request. For 104 * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel 105 * should perform lookup in keymap by @index instead of @scancode 106 * @keycode: key code assigned to this scancode 107 * 108 * The structure is used to retrieve and modify keymap data. Users have 109 * option of performing lookup either by @scancode itself or by @index 110 * in keymap entry. EVIOCGKEYCODE will also return scancode or index 111 * (depending on which element was used to perform lookup). 112 */ 113 struct input_keymap_entry { 114 #define INPUT_KEYMAP_BY_INDEX (1 << 0) 115 __u8 flags; 116 __u8 len; 117 __u16 index; 118 __u32 keycode; 119 __u8 scancode[32]; 120 }; 121 122 struct input_mask { 123 __u32 type; 124 __u32 codes_size; 125 __u64 codes_ptr; 126 }; 127 128 #define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ 129 #define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ 130 #define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ 131 #define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ 132 133 #define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ 134 #define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) 135 #define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ 136 #define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) 137 138 #define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ 139 #define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ 140 #define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ 141 #define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ 142 143 /** 144 * EVIOCGMTSLOTS(len) - get MT slot values 145 * @len: size of the data buffer in bytes 146 * 147 * The ioctl buffer argument should be binary equivalent to 148 * 149 * struct input_mt_request_layout { 150 * __u32 code; 151 * __s32 values[num_slots]; 152 * }; 153 * 154 * where num_slots is the (arbitrary) number of MT slots to extract. 155 * 156 * The ioctl size argument (len) is the size of the buffer, which 157 * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is 158 * too small to fit all available slots, the first num_slots are 159 * returned. 160 * 161 * Before the call, code is set to the wanted ABS_MT event type. On 162 * return, values[] is filled with the slot values for the specified 163 * ABS_MT code. 164 * 165 * If the request code is not an ABS_MT value, -EINVAL is returned. 166 */ 167 #define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) 168 169 #define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ 170 #define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ 171 #define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ 172 #define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ 173 174 #define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ 175 #define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ 176 #define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ 177 178 #define EVIOCSFF _IOW('E', 0x80, struct ff_effect) /* send a force effect to a force feedback device */ 179 #define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ 180 #define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ 181 182 #define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ 183 #define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */ 184 185 /** 186 * EVIOCGMASK - Retrieve current event mask 187 * 188 * This ioctl allows user to retrieve the current event mask for specific 189 * event type. The argument must be of type "struct input_mask" and 190 * specifies the event type to query, the address of the receive buffer and 191 * the size of the receive buffer. 192 * 193 * The event mask is a per-client mask that specifies which events are 194 * forwarded to the client. Each event code is represented by a single bit 195 * in the event mask. If the bit is set, the event is passed to the client 196 * normally. Otherwise, the event is filtered and will never be queued on 197 * the client's receive buffer. 198 * 199 * Event masks do not affect global state of the input device. They only 200 * affect the file descriptor they are applied to. 201 * 202 * The default event mask for a client has all bits set, i.e. all events 203 * are forwarded to the client. If the kernel is queried for an unknown 204 * event type or if the receive buffer is larger than the number of 205 * event codes known to the kernel, the kernel returns all zeroes for those 206 * codes. 207 * 208 * At maximum, codes_size bytes are copied. 209 * 210 * This ioctl may fail with ENODEV in case the file is revoked, EFAULT 211 * if the receive-buffer points to invalid memory, or EINVAL if the kernel 212 * does not implement the ioctl. 213 */ 214 #define EVIOCGMASK _IOR('E', 0x92, struct input_mask) /* Get event-masks */ 215 216 /** 217 * EVIOCSMASK - Set event mask 218 * 219 * This ioctl is the counterpart to EVIOCGMASK. Instead of receiving the 220 * current event mask, this changes the client's event mask for a specific 221 * type. See EVIOCGMASK for a description of event-masks and the 222 * argument-type. 223 * 224 * This ioctl provides full forward compatibility. If the passed event type 225 * is unknown to the kernel, or if the number of event codes specified in 226 * the mask is bigger than what is known to the kernel, the ioctl is still 227 * accepted and applied. However, any unknown codes are left untouched and 228 * stay cleared. That means, the kernel always filters unknown codes 229 * regardless of what the client requests. If the new mask doesn't cover 230 * all known event-codes, all remaining codes are automatically cleared and 231 * thus filtered. 232 * 233 * This ioctl may fail with ENODEV in case the file is revoked. EFAULT is 234 * returned if the receive-buffer points to invalid memory. EINVAL is returned 235 * if the kernel does not implement the ioctl. 236 */ 237 #define EVIOCSMASK _IOW('E', 0x93, struct input_mask) /* Set event-masks */ 238 239 #define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ 240 241 /* 242 * IDs. 243 */ 244 245 #define ID_BUS 0 246 #define ID_VENDOR 1 247 #define ID_PRODUCT 2 248 #define ID_VERSION 3 249 250 #define BUS_PCI 0x01 251 #define BUS_ISAPNP 0x02 252 #define BUS_USB 0x03 253 #define BUS_HIL 0x04 254 #define BUS_BLUETOOTH 0x05 255 #define BUS_VIRTUAL 0x06 256 257 #define BUS_ISA 0x10 258 #define BUS_I8042 0x11 259 #define BUS_XTKBD 0x12 260 #define BUS_RS232 0x13 261 #define BUS_GAMEPORT 0x14 262 #define BUS_PARPORT 0x15 263 #define BUS_AMIGA 0x16 264 #define BUS_ADB 0x17 265 #define BUS_I2C 0x18 266 #define BUS_HOST 0x19 267 #define BUS_GSC 0x1A 268 #define BUS_ATARI 0x1B 269 #define BUS_SPI 0x1C 270 #define BUS_RMI 0x1D 271 #define BUS_CEC 0x1E 272 #define BUS_INTEL_ISHTP 0x1F 273 274 /* 275 * MT_TOOL types 276 */ 277 #define MT_TOOL_FINGER 0x00 278 #define MT_TOOL_PEN 0x01 279 #define MT_TOOL_PALM 0x02 280 #define MT_TOOL_DIAL 0x0a 281 #define MT_TOOL_MAX 0x0f 282 283 /* 284 * Values describing the status of a force-feedback effect 285 */ 286 #define FF_STATUS_STOPPED 0x00 287 #define FF_STATUS_PLAYING 0x01 288 #define FF_STATUS_MAX 0x01 289 290 /* 291 * Structures used in ioctls to upload effects to a device 292 * They are pieces of a bigger structure (called ff_effect) 293 */ 294 295 /* 296 * All duration values are expressed in ms. Values above 32767 ms (0x7fff) 297 * should not be used and have unspecified results. 298 */ 299 300 /** 301 * struct ff_replay - defines scheduling of the force-feedback effect 302 * @length: duration of the effect 303 * @delay: delay before effect should start playing 304 */ 305 struct ff_replay { 306 __u16 length; 307 __u16 delay; 308 }; 309 310 /** 311 * struct ff_trigger - defines what triggers the force-feedback effect 312 * @button: number of the button triggering the effect 313 * @interval: controls how soon the effect can be re-triggered 314 */ 315 struct ff_trigger { 316 __u16 button; 317 __u16 interval; 318 }; 319 320 /** 321 * struct ff_envelope - generic force-feedback effect envelope 322 * @attack_length: duration of the attack (ms) 323 * @attack_level: level at the beginning of the attack 324 * @fade_length: duration of fade (ms) 325 * @fade_level: level at the end of fade 326 * 327 * The @attack_level and @fade_level are absolute values; when applying 328 * envelope force-feedback core will convert to positive/negative 329 * value based on polarity of the default level of the effect. 330 * Valid range for the attack and fade levels is 0x0000 - 0x7fff 331 */ 332 struct ff_envelope { 333 __u16 attack_length; 334 __u16 attack_level; 335 __u16 fade_length; 336 __u16 fade_level; 337 }; 338 339 /** 340 * struct ff_constant_effect - defines parameters of a constant force-feedback effect 341 * @level: strength of the effect; may be negative 342 * @envelope: envelope data 343 */ 344 struct ff_constant_effect { 345 __s16 level; 346 struct ff_envelope envelope; 347 }; 348 349 /** 350 * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect 351 * @start_level: beginning strength of the effect; may be negative 352 * @end_level: final strength of the effect; may be negative 353 * @envelope: envelope data 354 */ 355 struct ff_ramp_effect { 356 __s16 start_level; 357 __s16 end_level; 358 struct ff_envelope envelope; 359 }; 360 361 /** 362 * struct ff_condition_effect - defines a spring or friction force-feedback effect 363 * @right_saturation: maximum level when joystick moved all way to the right 364 * @left_saturation: same for the left side 365 * @right_coeff: controls how fast the force grows when the joystick moves 366 * to the right 367 * @left_coeff: same for the left side 368 * @deadband: size of the dead zone, where no force is produced 369 * @center: position of the dead zone 370 */ 371 struct ff_condition_effect { 372 __u16 right_saturation; 373 __u16 left_saturation; 374 375 __s16 right_coeff; 376 __s16 left_coeff; 377 378 __u16 deadband; 379 __s16 center; 380 }; 381 382 /** 383 * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect 384 * @waveform: kind of the effect (wave) 385 * @period: period of the wave (ms) 386 * @magnitude: peak value 387 * @offset: mean value of the wave (roughly) 388 * @phase: 'horizontal' shift 389 * @envelope: envelope data 390 * @custom_len: number of samples (FF_CUSTOM only) 391 * @custom_data: buffer of samples (FF_CUSTOM only) 392 * 393 * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP, 394 * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined 395 * for the time being as no driver supports it yet. 396 * 397 * Note: the data pointed by custom_data is copied by the driver. 398 * You can therefore dispose of the memory after the upload/update. 399 */ 400 struct ff_periodic_effect { 401 __u16 waveform; 402 __u16 period; 403 __s16 magnitude; 404 __s16 offset; 405 __u16 phase; 406 407 struct ff_envelope envelope; 408 409 __u32 custom_len; 410 __s16 __user *custom_data; 411 }; 412 413 /** 414 * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect 415 * @strong_magnitude: magnitude of the heavy motor 416 * @weak_magnitude: magnitude of the light one 417 * 418 * Some rumble pads have two motors of different weight. Strong_magnitude 419 * represents the magnitude of the vibration generated by the heavy one. 420 */ 421 struct ff_rumble_effect { 422 __u16 strong_magnitude; 423 __u16 weak_magnitude; 424 }; 425 426 /** 427 * struct ff_effect - defines force feedback effect 428 * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING, 429 * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM) 430 * @id: an unique id assigned to an effect 431 * @direction: direction of the effect 432 * @trigger: trigger conditions (struct ff_trigger) 433 * @replay: scheduling of the effect (struct ff_replay) 434 * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect, 435 * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further 436 * defining effect parameters 437 * 438 * This structure is sent through ioctl from the application to the driver. 439 * To create a new effect application should set its @id to -1; the kernel 440 * will return assigned @id which can later be used to update or delete 441 * this effect. 442 * 443 * Direction of the effect is encoded as follows: 444 * 0 deg -> 0x0000 (down) 445 * 90 deg -> 0x4000 (left) 446 * 180 deg -> 0x8000 (up) 447 * 270 deg -> 0xC000 (right) 448 */ 449 struct ff_effect { 450 __u16 type; 451 __s16 id; 452 __u16 direction; 453 struct ff_trigger trigger; 454 struct ff_replay replay; 455 456 union { 457 struct ff_constant_effect constant; 458 struct ff_ramp_effect ramp; 459 struct ff_periodic_effect periodic; 460 struct ff_condition_effect condition[2]; /* One for each axis */ 461 struct ff_rumble_effect rumble; 462 } u; 463 }; 464 465 /* 466 * Force feedback effect types 467 */ 468 469 #define FF_RUMBLE 0x50 470 #define FF_PERIODIC 0x51 471 #define FF_CONSTANT 0x52 472 #define FF_SPRING 0x53 473 #define FF_FRICTION 0x54 474 #define FF_DAMPER 0x55 475 #define FF_INERTIA 0x56 476 #define FF_RAMP 0x57 477 478 #define FF_EFFECT_MIN FF_RUMBLE 479 #define FF_EFFECT_MAX FF_RAMP 480 481 /* 482 * Force feedback periodic effect types 483 */ 484 485 #define FF_SQUARE 0x58 486 #define FF_TRIANGLE 0x59 487 #define FF_SINE 0x5a 488 #define FF_SAW_UP 0x5b 489 #define FF_SAW_DOWN 0x5c 490 #define FF_CUSTOM 0x5d 491 492 #define FF_WAVEFORM_MIN FF_SQUARE 493 #define FF_WAVEFORM_MAX FF_CUSTOM 494 495 /* 496 * Set ff device properties 497 */ 498 499 #define FF_GAIN 0x60 500 #define FF_AUTOCENTER 0x61 501 502 /* 503 * ff->playback(effect_id = FF_GAIN) is the first effect_id to 504 * cause a collision with another ff method, in this case ff->set_gain(). 505 * Therefore the greatest safe value for effect_id is FF_GAIN - 1, 506 * and thus the total number of effects should never exceed FF_GAIN. 507 */ 508 #define FF_MAX_EFFECTS FF_GAIN 509 510 #define FF_MAX 0x7f 511 #define FF_CNT (FF_MAX+1) 512 513 #endif /* _UAPI_INPUT_H */ 514