1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Freescale SerDes initialization routine
4 *
5 * Copyright 2007,2011 Freescale Semiconductor, Inc.
6 * Copyright (C) 2008 MontaVista Software, Inc.
7 *
8 * Author: Li Yang <leoli@freescale.com>
9 */
10
11 #include <config.h>
12 #include <common.h>
13 #include <asm/io.h>
14 #include <asm/fsl_mpc83xx_serdes.h>
15
16 /* SerDes registers */
17 #define FSL_SRDSCR0_OFFS 0x0
18 #define FSL_SRDSCR0_DPP_1V2 0x00008800
19 #define FSL_SRDSCR0_TXEQA_MASK 0x00007000
20 #define FSL_SRDSCR0_TXEQA_SATA 0x00001000
21 #define FSL_SRDSCR0_TXEQE_MASK 0x00000700
22 #define FSL_SRDSCR0_TXEQE_SATA 0x00000100
23 #define FSL_SRDSCR1_OFFS 0x4
24 #define FSL_SRDSCR1_PLLBW 0x00000040
25 #define FSL_SRDSCR2_OFFS 0x8
26 #define FSL_SRDSCR2_VDD_1V2 0x00800000
27 #define FSL_SRDSCR2_SEIC_MASK 0x00001c1c
28 #define FSL_SRDSCR2_SEIC_SATA 0x00001414
29 #define FSL_SRDSCR2_SEIC_PEX 0x00001010
30 #define FSL_SRDSCR2_SEIC_SGMII 0x00000101
31 #define FSL_SRDSCR3_OFFS 0xc
32 #define FSL_SRDSCR3_KFR_SATA 0x10100000
33 #define FSL_SRDSCR3_KPH_SATA 0x04040000
34 #define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000
35 #define FSL_SRDSCR3_SDTXL_SATA 0x00000505
36 #define FSL_SRDSCR4_OFFS 0x10
37 #define FSL_SRDSCR4_PROT_SATA 0x00000808
38 #define FSL_SRDSCR4_PROT_PEX 0x00000101
39 #define FSL_SRDSCR4_PROT_SGMII 0x00000505
40 #define FSL_SRDSCR4_PLANE_X2 0x01000000
41 #define FSL_SRDSRSTCTL_OFFS 0x20
42 #define FSL_SRDSRSTCTL_RST 0x80000000
43 #define FSL_SRDSRSTCTL_SATA_RESET 0xf
44
fsl_setup_serdes(u32 offset,char proto,u32 rfcks,char vdd)45 void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd)
46 {
47 void *regs = (void *)CONFIG_SYS_IMMR + offset;
48 u32 tmp;
49
50 /* 1.0V corevdd */
51 if (vdd) {
52 /* DPPE/DPPA = 0 */
53 tmp = in_be32(regs + FSL_SRDSCR0_OFFS);
54 tmp &= ~FSL_SRDSCR0_DPP_1V2;
55 out_be32(regs + FSL_SRDSCR0_OFFS, tmp);
56
57 /* VDD = 0 */
58 tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
59 tmp &= ~FSL_SRDSCR2_VDD_1V2;
60 out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
61 }
62
63 /* protocol specific configuration */
64 switch (proto) {
65 case FSL_SERDES_PROTO_SATA:
66 /* Set and clear reset bits */
67 tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
68 tmp |= FSL_SRDSRSTCTL_SATA_RESET;
69 out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
70 udelay(1000);
71 tmp &= ~FSL_SRDSRSTCTL_SATA_RESET;
72 out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
73
74 /* Configure SRDSCR0 */
75 clrsetbits_be32(regs + FSL_SRDSCR0_OFFS,
76 FSL_SRDSCR0_TXEQA_MASK | FSL_SRDSCR0_TXEQE_MASK,
77 FSL_SRDSCR0_TXEQA_SATA | FSL_SRDSCR0_TXEQE_SATA);
78
79 /* Configure SRDSCR1 */
80 tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
81 tmp &= ~FSL_SRDSCR1_PLLBW;
82 out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
83
84 /* Configure SRDSCR2 */
85 tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
86 tmp &= ~FSL_SRDSCR2_SEIC_MASK;
87 tmp |= FSL_SRDSCR2_SEIC_SATA;
88 out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
89
90 /* Configure SRDSCR3 */
91 tmp = FSL_SRDSCR3_KFR_SATA | FSL_SRDSCR3_KPH_SATA |
92 FSL_SRDSCR3_SDFM_SATA_PEX |
93 FSL_SRDSCR3_SDTXL_SATA;
94 out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
95
96 /* Configure SRDSCR4 */
97 tmp = rfcks | FSL_SRDSCR4_PROT_SATA;
98 out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
99 break;
100 case FSL_SERDES_PROTO_PEX:
101 case FSL_SERDES_PROTO_PEX_X2:
102 /* Configure SRDSCR1 */
103 tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
104 tmp |= FSL_SRDSCR1_PLLBW;
105 out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
106
107 /* Configure SRDSCR2 */
108 tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
109 tmp &= ~FSL_SRDSCR2_SEIC_MASK;
110 tmp |= FSL_SRDSCR2_SEIC_PEX;
111 out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
112
113 /* Configure SRDSCR3 */
114 tmp = FSL_SRDSCR3_SDFM_SATA_PEX;
115 out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
116
117 /* Configure SRDSCR4 */
118 tmp = rfcks | FSL_SRDSCR4_PROT_PEX;
119 if (proto == FSL_SERDES_PROTO_PEX_X2)
120 tmp |= FSL_SRDSCR4_PLANE_X2;
121 out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
122 break;
123 case FSL_SERDES_PROTO_SGMII:
124 /* Configure SRDSCR1 */
125 tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
126 tmp &= ~FSL_SRDSCR1_PLLBW;
127 out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
128
129 /* Configure SRDSCR2 */
130 tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
131 tmp &= ~FSL_SRDSCR2_SEIC_MASK;
132 tmp |= FSL_SRDSCR2_SEIC_SGMII;
133 out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
134
135 /* Configure SRDSCR3 */
136 out_be32(regs + FSL_SRDSCR3_OFFS, 0);
137
138 /* Configure SRDSCR4 */
139 tmp = rfcks | FSL_SRDSCR4_PROT_SGMII;
140 out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
141 break;
142 default:
143 return;
144 }
145
146 /* Do a software reset */
147 tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
148 tmp |= FSL_SRDSRSTCTL_RST;
149 out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
150 }
151