1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (c) 2011 The Chromium OS Authors.
4 * (C) Copyright 2002
5 * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
6 */
7
8 /*
9 * Linux x86 zImage and bzImage loading
10 *
11 * based on the procdure described in
12 * linux/Documentation/i386/boot.txt
13 */
14
15 #include <common.h>
16 #include <malloc.h>
17 #include <asm/acpi_table.h>
18 #include <asm/io.h>
19 #include <asm/ptrace.h>
20 #include <asm/zimage.h>
21 #include <asm/byteorder.h>
22 #include <asm/bootm.h>
23 #include <asm/bootparam.h>
24 #ifdef CONFIG_SYS_COREBOOT
25 #include <asm/arch/timestamp.h>
26 #endif
27 #include <linux/compiler.h>
28 #include <linux/libfdt.h>
29
30 /*
31 * Memory lay-out:
32 *
33 * relative to setup_base (which is 0x90000 currently)
34 *
35 * 0x0000-0x7FFF Real mode kernel
36 * 0x8000-0x8FFF Stack and heap
37 * 0x9000-0x90FF Kernel command line
38 */
39 #define DEFAULT_SETUP_BASE 0x90000
40 #define COMMAND_LINE_OFFSET 0x9000
41 #define HEAP_END_OFFSET 0x8e00
42
43 #define COMMAND_LINE_SIZE 2048
44
build_command_line(char * command_line,int auto_boot)45 static void build_command_line(char *command_line, int auto_boot)
46 {
47 char *env_command_line;
48
49 command_line[0] = '\0';
50
51 env_command_line = env_get("bootargs");
52
53 /* set console= argument if we use a serial console */
54 if (!strstr(env_command_line, "console=")) {
55 if (!strcmp(env_get("stdout"), "serial")) {
56
57 /* We seem to use serial console */
58 sprintf(command_line, "console=ttyS0,%s ",
59 env_get("baudrate"));
60 }
61 }
62
63 if (auto_boot)
64 strcat(command_line, "auto ");
65
66 if (env_command_line)
67 strcat(command_line, env_command_line);
68
69 printf("Kernel command line: \"%s\"\n", command_line);
70 }
71
kernel_magic_ok(struct setup_header * hdr)72 static int kernel_magic_ok(struct setup_header *hdr)
73 {
74 if (KERNEL_MAGIC != hdr->boot_flag) {
75 printf("Error: Invalid Boot Flag "
76 "(found 0x%04x, expected 0x%04x)\n",
77 hdr->boot_flag, KERNEL_MAGIC);
78 return 0;
79 } else {
80 printf("Valid Boot Flag\n");
81 return 1;
82 }
83 }
84
get_boot_protocol(struct setup_header * hdr)85 static int get_boot_protocol(struct setup_header *hdr)
86 {
87 if (hdr->header == KERNEL_V2_MAGIC) {
88 printf("Magic signature found\n");
89 return hdr->version;
90 } else {
91 /* Very old kernel */
92 printf("Magic signature not found\n");
93 return 0x0100;
94 }
95 }
96
setup_device_tree(struct setup_header * hdr,const void * fdt_blob)97 static int setup_device_tree(struct setup_header *hdr, const void *fdt_blob)
98 {
99 int bootproto = get_boot_protocol(hdr);
100 struct setup_data *sd;
101 int size;
102
103 if (bootproto < 0x0209)
104 return -ENOTSUPP;
105
106 if (!fdt_blob)
107 return 0;
108
109 size = fdt_totalsize(fdt_blob);
110 if (size < 0)
111 return -EINVAL;
112
113 size += sizeof(struct setup_data);
114 sd = (struct setup_data *)malloc(size);
115 if (!sd) {
116 printf("Not enough memory for DTB setup data\n");
117 return -ENOMEM;
118 }
119
120 sd->next = hdr->setup_data;
121 sd->type = SETUP_DTB;
122 sd->len = fdt_totalsize(fdt_blob);
123 memcpy(sd->data, fdt_blob, sd->len);
124 hdr->setup_data = (unsigned long)sd;
125
126 return 0;
127 }
128
load_zimage(char * image,unsigned long kernel_size,ulong * load_addressp)129 struct boot_params *load_zimage(char *image, unsigned long kernel_size,
130 ulong *load_addressp)
131 {
132 struct boot_params *setup_base;
133 int setup_size;
134 int bootproto;
135 int big_image;
136
137 struct boot_params *params = (struct boot_params *)image;
138 struct setup_header *hdr = ¶ms->hdr;
139
140 /* base address for real-mode segment */
141 setup_base = (struct boot_params *)DEFAULT_SETUP_BASE;
142
143 if (!kernel_magic_ok(hdr))
144 return 0;
145
146 /* determine size of setup */
147 if (0 == hdr->setup_sects) {
148 printf("Setup Sectors = 0 (defaulting to 4)\n");
149 setup_size = 5 * 512;
150 } else {
151 setup_size = (hdr->setup_sects + 1) * 512;
152 }
153
154 printf("Setup Size = 0x%8.8lx\n", (ulong)setup_size);
155
156 if (setup_size > SETUP_MAX_SIZE)
157 printf("Error: Setup is too large (%d bytes)\n", setup_size);
158
159 /* determine boot protocol version */
160 bootproto = get_boot_protocol(hdr);
161
162 printf("Using boot protocol version %x.%02x\n",
163 (bootproto & 0xff00) >> 8, bootproto & 0xff);
164
165 if (bootproto >= 0x0200) {
166 if (hdr->setup_sects >= 15) {
167 printf("Linux kernel version %s\n",
168 (char *)params +
169 hdr->kernel_version + 0x200);
170 } else {
171 printf("Setup Sectors < 15 - "
172 "Cannot print kernel version.\n");
173 }
174 }
175
176 /* Determine image type */
177 big_image = (bootproto >= 0x0200) &&
178 (hdr->loadflags & BIG_KERNEL_FLAG);
179
180 /* Determine load address */
181 if (big_image)
182 *load_addressp = BZIMAGE_LOAD_ADDR;
183 else
184 *load_addressp = ZIMAGE_LOAD_ADDR;
185
186 printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base);
187 memset(setup_base, 0, sizeof(*setup_base));
188 setup_base->hdr = params->hdr;
189
190 if (bootproto >= 0x0204)
191 kernel_size = hdr->syssize * 16;
192 else
193 kernel_size -= setup_size;
194
195 if (bootproto == 0x0100) {
196 /*
197 * A very old kernel MUST have its real-mode code
198 * loaded at 0x90000
199 */
200 if ((ulong)setup_base != 0x90000) {
201 /* Copy the real-mode kernel */
202 memmove((void *)0x90000, setup_base, setup_size);
203
204 /* Copy the command line */
205 memmove((void *)0x99000,
206 (u8 *)setup_base + COMMAND_LINE_OFFSET,
207 COMMAND_LINE_SIZE);
208
209 /* Relocated */
210 setup_base = (struct boot_params *)0x90000;
211 }
212
213 /* It is recommended to clear memory up to the 32K mark */
214 memset((u8 *)0x90000 + setup_size, 0,
215 SETUP_MAX_SIZE - setup_size);
216 }
217
218 if (big_image) {
219 if (kernel_size > BZIMAGE_MAX_SIZE) {
220 printf("Error: bzImage kernel too big! "
221 "(size: %ld, max: %d)\n",
222 kernel_size, BZIMAGE_MAX_SIZE);
223 return 0;
224 }
225 } else if ((kernel_size) > ZIMAGE_MAX_SIZE) {
226 printf("Error: zImage kernel too big! (size: %ld, max: %d)\n",
227 kernel_size, ZIMAGE_MAX_SIZE);
228 return 0;
229 }
230
231 printf("Loading %s at address %lx (%ld bytes)\n",
232 big_image ? "bzImage" : "zImage", *load_addressp, kernel_size);
233
234 memmove((void *)*load_addressp, image + setup_size, kernel_size);
235
236 return setup_base;
237 }
238
setup_zimage(struct boot_params * setup_base,char * cmd_line,int auto_boot,unsigned long initrd_addr,unsigned long initrd_size)239 int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot,
240 unsigned long initrd_addr, unsigned long initrd_size)
241 {
242 struct setup_header *hdr = &setup_base->hdr;
243 int bootproto = get_boot_protocol(hdr);
244
245 setup_base->e820_entries = install_e820_map(
246 ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
247
248 if (bootproto == 0x0100) {
249 setup_base->screen_info.cl_magic = COMMAND_LINE_MAGIC;
250 setup_base->screen_info.cl_offset = COMMAND_LINE_OFFSET;
251 }
252 if (bootproto >= 0x0200) {
253 hdr->type_of_loader = 8;
254
255 if (initrd_addr) {
256 printf("Initial RAM disk at linear address "
257 "0x%08lx, size %ld bytes\n",
258 initrd_addr, initrd_size);
259
260 hdr->ramdisk_image = initrd_addr;
261 hdr->ramdisk_size = initrd_size;
262 }
263 }
264
265 if (bootproto >= 0x0201) {
266 hdr->heap_end_ptr = HEAP_END_OFFSET;
267 hdr->loadflags |= HEAP_FLAG;
268 }
269
270 if (cmd_line) {
271 if (bootproto >= 0x0202) {
272 hdr->cmd_line_ptr = (uintptr_t)cmd_line;
273 } else if (bootproto >= 0x0200) {
274 setup_base->screen_info.cl_magic = COMMAND_LINE_MAGIC;
275 setup_base->screen_info.cl_offset =
276 (uintptr_t)cmd_line - (uintptr_t)setup_base;
277
278 hdr->setup_move_size = 0x9100;
279 }
280
281 /* build command line at COMMAND_LINE_OFFSET */
282 build_command_line(cmd_line, auto_boot);
283 }
284
285 #ifdef CONFIG_INTEL_MID
286 if (bootproto >= 0x0207)
287 hdr->hardware_subarch = X86_SUBARCH_INTEL_MID;
288 #endif
289
290 #ifdef CONFIG_GENERATE_ACPI_TABLE
291 if (bootproto >= 0x020e)
292 hdr->acpi_rsdp_addr = acpi_get_rsdp_addr();
293 #endif
294
295 setup_device_tree(hdr, (const void *)env_get_hex("fdtaddr", 0));
296 setup_video(&setup_base->screen_info);
297
298 return 0;
299 }
300
301 void setup_pcat_compatibility(void)
302 __attribute__((weak, alias("__setup_pcat_compatibility")));
303
__setup_pcat_compatibility(void)304 void __setup_pcat_compatibility(void)
305 {
306 }
307
do_zboot(cmd_tbl_t * cmdtp,int flag,int argc,char * const argv[])308 int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
309 {
310 struct boot_params *base_ptr;
311 void *bzImage_addr = NULL;
312 ulong load_address;
313 char *s;
314 ulong bzImage_size = 0;
315 ulong initrd_addr = 0;
316 ulong initrd_size = 0;
317
318 disable_interrupts();
319
320 /* Setup board for maximum PC/AT Compatibility */
321 setup_pcat_compatibility();
322
323 if (argc >= 2) {
324 /* argv[1] holds the address of the bzImage */
325 s = argv[1];
326 } else {
327 s = env_get("fileaddr");
328 }
329
330 if (s)
331 bzImage_addr = (void *)simple_strtoul(s, NULL, 16);
332
333 if (argc >= 3) {
334 /* argv[2] holds the size of the bzImage */
335 bzImage_size = simple_strtoul(argv[2], NULL, 16);
336 }
337
338 if (argc >= 4)
339 initrd_addr = simple_strtoul(argv[3], NULL, 16);
340 if (argc >= 5)
341 initrd_size = simple_strtoul(argv[4], NULL, 16);
342
343 /* Lets look for */
344 base_ptr = load_zimage(bzImage_addr, bzImage_size, &load_address);
345
346 if (!base_ptr) {
347 puts("## Kernel loading failed ...\n");
348 return -1;
349 }
350 if (setup_zimage(base_ptr, (char *)base_ptr + COMMAND_LINE_OFFSET,
351 0, initrd_addr, initrd_size)) {
352 puts("Setting up boot parameters failed ...\n");
353 return -1;
354 }
355
356 /* we assume that the kernel is in place */
357 return boot_linux_kernel((ulong)base_ptr, load_address, false);
358 }
359
360 U_BOOT_CMD(
361 zboot, 5, 0, do_zboot,
362 "Boot bzImage",
363 "[addr] [size] [initrd addr] [initrd size]\n"
364 " addr - The optional starting address of the bzimage.\n"
365 " If not set it defaults to the environment\n"
366 " variable \"fileaddr\".\n"
367 " size - The optional size of the bzimage. Defaults to\n"
368 " zero.\n"
369 " initrd addr - The address of the initrd image to use, if any.\n"
370 " initrd size - The size of the initrd image to use, if any.\n"
371 );
372