README
1Freescale MCF52277EVB ColdFire Development Board
2================================================
3
4TsiChung Liew(Tsi-Chung.Liew@freescale.com)
5Created Jan 8, 2008
6===========================================
7
8
9Changed files:
10==============
11
12- board/freescale/m52277evb/m52277evb.c Dram setup
13- board/freescale/m52277evb/Makefile Makefile
14- board/freescale/m52277evb/config.mk config make
15- board/freescale/m52277evb/u-boot.lds Linker description
16
17- arch/m68k/cpu/mcf5227x/cpu.c cpu specific code
18- arch/m68k/cpu/mcf5227x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
19- arch/m68k/cpu/mcf5227x/interrupts.c cpu specific interrupt support
20- arch/m68k/cpu/mcf5227x/speed.c system, flexbus, and cpu clock
21- arch/m68k/cpu/mcf5227x/Makefile Makefile
22- arch/m68k/cpu/mcf5227x/config.mk config make
23- arch/m68k/cpu/mcf5227x/start.S start up assembly code
24
25- doc/README.m52277evb This readme file
26
27- drivers/serial/mcfuart.c ColdFire common UART driver
28- drivers/rtc/mcfrtc.c Realtime clock Driver
29
30- include/asm-m68k/bitops.h Bit operation function export
31- include/asm-m68k/byteorder.h Byte order functions
32- include/asm-m68k/crossbar.h CrossBar structure and definition
33- include/asm-m68k/dspi.h DSPI structure and definition
34- include/asm-m68k/edma.h eDMA structure and definition
35- include/asm-m68k/flexbus.h FlexBus structure and definition
36- include/asm-m68k/fsl_i2c.h I2C structure and definition
37- include/asm-m68k/global_data.h Global data structure
38- include/asm-m68k/immap.h ColdFire specific header file and driver macros
39- include/asm-m68k/immap_5227x.h mcf5227x specific header file
40- include/asm-m68k/io.h io functions
41- include/asm-m68k/lcd.h LCD structure and definition
42- include/asm-m68k/m5227x.h mcf5227x specific header file
43- include/asm-m68k/posix_types.h Posix
44- include/asm-m68k/processor.h header file
45- include/asm-m68k/ptrace.h Exception structure
46- include/asm-m68k/rtc.h Realtime clock header file
47- include/asm-m68k/ssi.h SSI structure and definition
48- include/asm-m68k/string.h String function export
49- include/asm-m68k/timer.h Timer structure and definition
50- include/asm-m68k/types.h Data types definition
51- include/asm-m68k/uart.h Uart structure and definition
52- include/asm-m68k/u-boot.h U-Boot structure
53
54- include/configs/M52277EVB.h Board specific configuration file
55
56- arch/m68k/lib/board.c board init function
57- arch/m68k/lib/cache.c
58- arch/m68k/lib/interrupts Coldfire common interrupt functions
59- arch/m68k/lib/m68k_linux.c
60- arch/m68k/lib/time.c Timer functions (Dma timer and PIT)
61- arch/m68k/lib/traps.c Exception init code
62
631 MCF52277 specific Options/Settings
64====================================
651.1 pre-loader is no longer suppoer in this coldfire family
66
671.2 Configuration settings for M52277EVB Development Board
68CONFIG_MCF5227x -- define for all MCF5227x CPUs
69CONFIG_M52277 -- define for all Freescale MCF52277 CPUs
70
71CONFIG_MCFUART -- define to use common CF Uart driver
72CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
73CONFIG_BAUDRATE -- define UART baudrate
74
75CONFIG_MCFRTC -- define to use common CF RTC driver
76CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
77CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
78RTC_DEBUG -- define to show RTC debug message
79CONFIG_CMD_DATE -- enable to use date feature in U-Boot
80
81CONFIG_MCFTMR -- define to use DMA timer
82CONFIG_MCFPIT -- define to use PIT timer
83
84CONFIG_SYS_I2C_FSL -- define to use FSL common I2C driver
85CONFIG_SYS_I2C_SOFT -- define for I2C bit-banged
86CONFIG_SYS_I2C_SPEED -- define for I2C speed
87CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
88CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
89CONFIG_SYS_IMMR -- define for MBAR offset
90
91CONFIG_SYS_MBAR -- define MBAR offset
92
93CONFIG_MONITOR_IS_IN_RAM -- Not support
94
95CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF52277 internal SRAM
96
97CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
98CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
99CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
100
101CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
102
103CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot,
104update will be provided at later time
105
1062. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
107===========================================
1082.1. System memory map:
109 Flash: 0x00000000-0x3FFFFFFF (1024MB)
110 DDR: 0x40000000-0x7FFFFFFF (1024MB)
111 SRAM: 0x80000000-0x8FFFFFFF (256MB)
112 IP: 0xF0000000-0xFFFFFFFF (256MB)
113
1142.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
115 linux kernel, you can customize it based on your system requirements:
116 Flash0: 0x00000000-0x00FFFFFF (16MB)
117
118 DDR: 0x40000000-0x4FFFFFFF (64MB)
119 SRAM: 0x80000000-0x80007FFF (32KB)
120 IP: 0xFC000000-0xFC0FFFFF (64KB)
121
1223. COMPILATION
123==============
1243.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
125uClinux version) from codesourcery.com was used. Download it from:
126http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
127
1283.2 Compilation
129 export CROSS_COMPILE=cross-compile-prefix
130 cd u-boot-1.x.x
131 make distclean
132 make M52277EVB_config
133 make
134
1354. SCREEN DUMP
136==============
1374.1 M52277EVB Development board
138 (NOTE: May not show exactly the same)
139
140U-Boot 1.3.1 (Jan 8 2008 - 12:44:08)
141
142CPU: Freescale MCF52277 (Mask:6c Version:0)
143 CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ
144 INP CLK 16 Mhz VCO CLK 480 Mhz
145Board: Freescale 52277 EVB
146I2C: ready
147DRAM: 64 MB
148FLASH: 16 MB
149In: serial
150Out: serial
151Err: serial
152-> print
153baudrate=115200
154hostname=M52277EVB
155inpclk=16000000
156loadaddr=(0x40000000 + 0x10000)
157load=tftp ${loadaddr) ${u-boot}
158upd=run load; run prog
159prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
160u-boot=u-boot.bin
161stdin=serial
162stdout=serial
163stderr=serial
164mem=65024k
165
166Environment size: 280/32764 bytes
167-> bdinfo
168memstart = 0x40000000
169memsize = 0x04000000
170flashstart = 0x00000000
171flashsize = 0x01000000
172flashoffset = 0x00000000
173sramstart = 0x80000000
174sramsize = 0x00008000
175mbar = 0xFC000000
176busfreq = 80 MHz
177flbfreq = 80 Mhz
178inpfreq = 16 Mhz
179vcofreq = 480 Mhz
180
181baudrate = 115200 bps
182->
183-> help
184? - alias for 'help'
185base - print or set address offset
186bdinfo - print Board Info structure
187boot - boot default, i.e., run 'bootcmd'
188bootd - boot default, i.e., run 'bootcmd'
189bootelf - Boot from an ELF image in memory
190bootm - boot application image from memory
191bootp - boot image via network using BootP/TFTP protocol
192bootvx - Boot vxWorks from an ELF image
193cmp - memory compare
194coninfo - print console devices and information
195cp - memory copy
196crc32 - checksum calculation
197date - get/set/reset date & time
198dcache - enable or disable data cache
199echo - echo args to console
200erase - erase FLASH memory
201flinfo - print FLASH memory information
202go - start application at address 'addr'
203help - print online help
204i2c - I2C sub-system
205icache - enable or disable instruction cache
206iminfo - print header information for application image
207imls - list all images found in flash
208itest - return true/false on integer compare
209loadb - load binary file over serial line (kermit mode)
210loads - load S-Record file over serial line
211loady - load binary file over serial line (ymodem mode)
212loop - infinite loop on address range
213ls - list files in a directory (default /)
214md - memory display
215mm - memory modify (auto-incrementing)
216mtest - simple RAM test
217mw - memory write (fill)
218nm - memory modify (constant address)
219ping - send ICMP ECHO_REQUEST to network host
220printenv- print environment variables
221protect - enable or disable FLASH write protection
222reset - Perform RESET of the CPU
223run - run commands in an environment variable
224saveenv - save environment variables to persistent storage
225setenv - set environment variables
226sleep - delay execution for some time
227source - run script from memory
228version - print monitor version
229->
230