1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * (C) Copyright 2007
4 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
5 */
6
7 #ifndef __FDT_SUPPORT_H
8 #define __FDT_SUPPORT_H
9
10 #ifdef CONFIG_OF_LIBFDT
11
12 #include <linux/libfdt.h>
13
14 u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell,
15 const char *prop, const u32 dflt);
16 u32 fdt_getprop_u32_default(const void *fdt, const char *path,
17 const char *prop, const u32 dflt);
18
19 /**
20 * Add data to the root of the FDT before booting the OS.
21 *
22 * See doc/device-tree-bindings/root.txt
23 *
24 * @param fdt FDT address in memory
25 * @return 0 if ok, or -FDT_ERR_... on error
26 */
27 int fdt_root(void *fdt);
28
29 /**
30 * Add chosen data the FDT before booting the OS.
31 *
32 * In particular, this adds the kernel command line (bootargs) to the FDT.
33 *
34 * @param fdt FDT address in memory
35 * @return 0 if ok, or -FDT_ERR_... on error
36 */
37 int fdt_chosen(void *fdt);
38
39 /**
40 * Add initrd information to the FDT before booting the OS.
41 *
42 * @param fdt FDT address in memory
43 * @return 0 if ok, or -FDT_ERR_... on error
44 */
45 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end);
46
47 void do_fixup_by_path(void *fdt, const char *path, const char *prop,
48 const void *val, int len, int create);
49 void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop,
50 u32 val, int create);
51
do_fixup_by_path_string(void * fdt,const char * path,const char * prop,const char * status)52 static inline void do_fixup_by_path_string(void *fdt, const char *path,
53 const char *prop, const char *status)
54 {
55 do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1);
56 }
57
58 void do_fixup_by_prop(void *fdt,
59 const char *pname, const void *pval, int plen,
60 const char *prop, const void *val, int len,
61 int create);
62 void do_fixup_by_prop_u32(void *fdt,
63 const char *pname, const void *pval, int plen,
64 const char *prop, u32 val, int create);
65 void do_fixup_by_compat(void *fdt, const char *compat,
66 const char *prop, const void *val, int len, int create);
67 void do_fixup_by_compat_u32(void *fdt, const char *compat,
68 const char *prop, u32 val, int create);
69 /**
70 * Setup the memory node in the DT. Creates one if none was existing before.
71 * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the
72 * whole memory.
73 *
74 * @param blob FDT blob to update
75 * @param start Begin of DRAM mapping in physical memory
76 * @param size Size of the single memory bank
77 * @return 0 if ok, or -1 or -FDT_ERR_... on error
78 */
79 int fdt_fixup_memory(void *blob, u64 start, u64 size);
80
81 /**
82 * Fill the DT memory node with multiple memory banks.
83 * Creates the node if none was existing before.
84 * If banks is 0, it will not touch the existing reg property. This allows
85 * boards to not mess with the existing DT setup, which may have been
86 * filled in properly before.
87 *
88 * @param blob FDT blob to update
89 * @param start Array of size <banks> to hold the start addresses.
90 * @param size Array of size <banks> to hold the size of each region.
91 * @param banks Number of memory banks to create. If 0, the reg
92 * property will be left untouched.
93 * @return 0 if ok, or -1 or -FDT_ERR_... on error
94 */
95 #ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY
96 int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks);
97 #else
fdt_fixup_memory_banks(void * blob,u64 start[],u64 size[],int banks)98 static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[],
99 int banks)
100 {
101 return 0;
102 }
103 #endif
104
105 void fdt_fixup_ethernet(void *fdt);
106 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
107 const void *val, int len, int create);
108 void fdt_fixup_qe_firmware(void *fdt);
109
110 /**
111 * Update native-mode property of display-timings node to the phandle
112 * of the timings matching a display by name (case insensitive).
113 *
114 * see kernel Documentation/devicetree/bindings/video/display-timing.txt
115 *
116 * @param blob FDT blob to update
117 * @param path path within dt
118 * @param display name of display timing to match
119 * @return 0 if ok, or -FDT_ERR_... on error
120 */
121 int fdt_fixup_display(void *blob, const char *path, const char *display);
122
123 #if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL)
124 void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd);
125 #else
fsl_fdt_fixup_dr_usb(void * blob,bd_t * bd)126 static inline void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
127 #endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */
128
129 #if defined(CONFIG_SYS_FSL_SEC_COMPAT)
130 void fdt_fixup_crypto_node(void *blob, int sec_rev);
131 #else
fdt_fixup_crypto_node(void * blob,int sec_rev)132 static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
133 #endif
134
135 /**
136 * Record information about a processed loadable in /fit-images (creating
137 * /fit-images if necessary).
138 *
139 * @param blob FDT blob to update
140 * @param index index of this loadable
141 * @param name name of the loadable
142 * @param load_addr address the loadable was loaded to
143 * @param size number of bytes loaded
144 * @param entry_point entry point (if specified, otherwise pass -1)
145 * @param type type (if specified, otherwise pass NULL)
146 * @param os os-type (if specified, otherwise pass NULL)
147 * @return 0 if ok, or -1 or -FDT_ERR_... on error
148 */
149 int fdt_record_loadable(void *blob, u32 index, const char *name,
150 uintptr_t load_addr, u32 size, uintptr_t entry_point,
151 const char *type, const char *os);
152
153 #ifdef CONFIG_PCI
154 #include <pci.h>
155 int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose);
156 #endif
157
158 int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name);
159
160 /**
161 * Add board-specific data to the FDT before booting the OS.
162 *
163 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
164 * This function is called if CONFIG_OF_BOARD_SETUP is defined
165 *
166 * @param blob FDT blob to update
167 * @param bd_t Pointer to board data
168 * @return 0 if ok, or -FDT_ERR_... on error
169 */
170 int ft_board_setup(void *blob, bd_t *bd);
171
172 /*
173 * The keystone2 SOC requires all 32 bit aliased addresses to be converted
174 * to their 36 physical format. This has to happen after all fdt nodes
175 * are added or modified by the image_setup_libfdt(). The ft_board_setup_ex()
176 * called at the end of the image_setup_libfdt() is to do that convertion.
177 */
178 void ft_board_setup_ex(void *blob, bd_t *bd);
179 void ft_cpu_setup(void *blob, bd_t *bd);
180 void ft_pci_setup(void *blob, bd_t *bd);
181
182 /**
183 * Add system-specific data to the FDT before booting the OS.
184 *
185 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space.
186 * This function is called if CONFIG_OF_SYSTEM_SETUP is defined
187 *
188 * @param blob FDT blob to update
189 * @param bd_t Pointer to board data
190 * @return 0 if ok, or -FDT_ERR_... on error
191 */
192 int ft_system_setup(void *blob, bd_t *bd);
193
194 void set_working_fdt_addr(ulong addr);
195
196 /**
197 * shrink down the given blob to minimum size + some extrasize if required
198 *
199 * @param blob FDT blob to update
200 * @param extrasize additional bytes needed
201 * @return 0 if ok, or -FDT_ERR_... on error
202 */
203 int fdt_shrink_to_minimum(void *blob, uint extrasize);
204 int fdt_increase_size(void *fdt, int add_len);
205
206 int fdt_fixup_nor_flash_size(void *blob);
207
208 #if defined(CONFIG_FDT_FIXUP_PARTITIONS)
209 void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size);
210 #else
fdt_fixup_mtdparts(void * fdt,void * node_info,int node_info_size)211 static inline void fdt_fixup_mtdparts(void *fdt, void *node_info,
212 int node_info_size) {}
213 #endif
214
215 void fdt_del_node_and_alias(void *blob, const char *alias);
216 u64 fdt_translate_address(const void *blob, int node_offset,
217 const __be32 *in_addr);
218 int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
219 phys_addr_t compat_off);
220 int fdt_alloc_phandle(void *blob);
221 int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle);
222 unsigned int fdt_create_phandle(void *fdt, int nodeoffset);
223 int fdt_add_edid(void *blob, const char *compat, unsigned char *buf);
224
225 int fdt_verify_alias_address(void *fdt, int anode, const char *alias,
226 u64 addr);
227 u64 fdt_get_base_address(const void *fdt, int node);
228 int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr,
229 uint64_t *addr, uint64_t *len);
230
231 enum fdt_status {
232 FDT_STATUS_OKAY,
233 FDT_STATUS_DISABLED,
234 FDT_STATUS_FAIL,
235 FDT_STATUS_FAIL_ERROR_CODE,
236 };
237 int fdt_set_node_status(void *fdt, int nodeoffset,
238 enum fdt_status status, unsigned int error_code);
fdt_status_okay(void * fdt,int nodeoffset)239 static inline int fdt_status_okay(void *fdt, int nodeoffset)
240 {
241 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0);
242 }
fdt_status_disabled(void * fdt,int nodeoffset)243 static inline int fdt_status_disabled(void *fdt, int nodeoffset)
244 {
245 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0);
246 }
fdt_status_fail(void * fdt,int nodeoffset)247 static inline int fdt_status_fail(void *fdt, int nodeoffset)
248 {
249 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0);
250 }
251
252 int fdt_set_status_by_alias(void *fdt, const char *alias,
253 enum fdt_status status, unsigned int error_code);
fdt_status_okay_by_alias(void * fdt,const char * alias)254 static inline int fdt_status_okay_by_alias(void *fdt, const char *alias)
255 {
256 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0);
257 }
fdt_status_disabled_by_alias(void * fdt,const char * alias)258 static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias)
259 {
260 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0);
261 }
fdt_status_fail_by_alias(void * fdt,const char * alias)262 static inline int fdt_status_fail_by_alias(void *fdt, const char *alias)
263 {
264 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0);
265 }
266
267 /* Helper to read a big number; size is in cells (not bytes) */
fdt_read_number(const fdt32_t * cell,int size)268 static inline u64 fdt_read_number(const fdt32_t *cell, int size)
269 {
270 u64 r = 0;
271 while (size--)
272 r = (r << 32) | fdt32_to_cpu(*(cell++));
273 return r;
274 }
275
276 void fdt_support_default_count_cells(const void *blob, int parentoffset,
277 int *addrc, int *sizec);
278 int ft_verify_fdt(void *fdt);
279 int arch_fixup_memory_node(void *blob);
280
281 int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width,
282 u32 height, u32 stride, const char *format);
283
284 int fdt_overlay_apply_verbose(void *fdt, void *fdto);
285
286 #endif /* ifdef CONFIG_OF_LIBFDT */
287
288 #ifdef USE_HOSTCC
289 int fdtdec_get_int(const void *blob, int node, const char *prop_name,
290 int default_val);
291 #endif
292 #ifdef CONFIG_FMAN_ENET
293 int fdt_update_ethernet_dt(void *blob);
294 #endif
295 #ifdef CONFIG_FSL_MC_ENET
296 void fdt_fixup_board_enet(void *blob);
297 #endif
298 #endif /* ifndef __FDT_SUPPORT_H */
299