1#Uncommenting these urls would only enable 2#the power up auto injection and force injection(test case). 3#XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin 4#XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin 5#XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin 6 7#Version check for XTRA 8#DISABLE = 0 9#AUTO = 1 10#XTRA2 = 2 11#XTRA3 = 3 12XTRA_VERSION_CHECK=0 13 14# Error Estimate 15# _SET = 1 16# _CLEAR = 0 17ERR_ESTIMATE=0 18 19#Test 20NTP_SERVER=time.gpsonextra.net 21#Asia 22# NTP_SERVER=asia.pool.ntp.org 23#Europe 24# NTP_SERVER=europe.pool.ntp.org 25#North America 26# NTP_SERVER=north-america.pool.ntp.org 27 28# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info 29# 4 - Debug, 5 - Verbose 30# If DEBUG_LEVEL is commented, Android's logging levels will be used 31DEBUG_LEVEL = 3 32 33# Intermediate position report, 1=enable, 0=disable 34INTERMEDIATE_POS=0 35 36# Below bit mask configures how GPS functionalities 37# should be locked when user turns off GPS on Settings 38# Set bit 0x1 if MO GPS functionalities are to be locked 39# Set bit 0x2 if NI GPS functionalities are to be locked 40# default - non is locked for backward compatibility 41#GPS_LOCK = 0 42 43# supl version 1.0 44SUPL_VER=0x10000 45 46# Emergency SUPL, 1=enable, 0=disable 47SUPL_ES=1 48 49#Choose PDN for Emergency SUPL 50#1 - Use emergency PDN 51#0 - Use regular SUPL PDN for Emergency SUPL 52USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 53 54#SUPL_MODE is a bit mask set in config.xml per carrier by default. 55#If it is uncommented here, this value will over write the value from 56#config.xml. 57#MSA=0X2 58#MSB=0X1 59#SUPL_MODE= 60 61# GPS Capabilities bit mask 62# SCHEDULING = 0x01 63# MSB = 0x02 64# MSA = 0x04 65# ON_DEMAND_TIME = 0x10 66# GEOFENCE = 0x20 67# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE 68CAPABILITIES=0x37 69 70# Accuracy threshold for intermediate positions 71# less accurate positions are ignored, 0 for passing all positions 72# ACCURACY_THRES=5000 73 74################################ 75##### AGPS server settings ##### 76################################ 77 78# FOR SUPL SUPPORT, set the following 79# SUPL_HOST=supl.host.com or IP 80# SUPL_PORT=1234 81 82# FOR C2K PDE SUPPORT, set the following 83# C2K_HOST=c2k.pde.com or IP 84# C2K_PORT=1234 85 86# Bitmask of slots that are available 87# for write/install to, where 1s indicate writable, 88# and the default value is 0 where no slots 89# are writable. For example, AGPS_CERT_WRITABLE_MASK 90# of b1000001010 makes 3 slots available 91# and the remaining 7 slots unwritable. 92#AGPS_CERT_WRITABLE_MASK=0 93 94#################################### 95# LTE Positioning Profile Settings 96#################################### 97# 0: Enable RRLP on LTE(Default) 98# 1: Enable LPP_User_Plane on LTE 99# 2: Enable LPP_Control_Plane 100# 3: Enable both LPP_User_Plane and LPP_Control_Plane 101LPP_PROFILE = 0 102 103################################ 104# EXTRA SETTINGS 105################################ 106# NMEA provider (1=Modem Processor, 0=Application Processor) 107NMEA_PROVIDER=0 108# Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) 109SGLTE_TARGET=0 110 111################################################## 112# Select Positioning Protocol on A-GLONASS system 113################################################## 114# 0x1: RRC CPlane 115# 0x2: RRLP UPlane 116# 0x4: LLP Uplane 117A_GLONASS_POS_PROTOCOL_SELECT = 0 118