Lines Matching refs:MHz

5 MPC8548 CPU, 8MB boot flash, 64MB user flash and, 256MB DDR2 400MHz
6 memory. It also has 128MB SDRAM 100MHz LBC memory, with both a PCI-e,
26 a base clock of 66MHz.	Note that you need both PCI enabled in U-Boot
29 The second enables PCI support and builds for a 33MHz clock rate.  Note
30 that if a 33MHz 32bit card is inserted in the slot, then the whole board
31 will clock down to a 33MHz base clock instead of the default 66MHz.  This
33 were previously running at 66MHz.  If you want to use a 33MHz PCI card,
35 to flash prior to powering down the board and inserting the 33MHz PCI
40 default 66MHz.	Options four and five are just repeats of option two
45 a 33MHz PCI configuration is currently untested.)
69 for 256MB of DDR2 @400MHz.  It does not by default use the DDR2 SPD
223 SerDes CLK(MHz)		SW5.1		SW5.2
246 D15		SYSCLK			66MHz		33MHz