• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2011
4  * eInfochips Ltd. <www.einfochips.com>
5  * Written-by: Ajay Bhargav <contact@8051projects.net>
6  *
7  * Based on Aspenite:
8  * (C) Copyright 2010
9  * Marvell Semiconductor <www.marvell.com>
10  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
11  * Contributor: Mahavir Jain <mjain@marvell.com>
12  */
13 
14 #ifndef __CONFIG_GPLUGD_H
15 #define __CONFIG_GPLUGD_H
16 
17 /*
18  * High Level Configuration Options
19  */
20 #define CONFIG_SHEEVA_88SV331xV5	1	/* CPU Core subversion */
21 #define CONFIG_ARMADA100		1	/* SOC Family Name */
22 #define CONFIG_ARMADA168		1	/* SOC Used on this Board */
23 #define CONFIG_MACH_TYPE		MACH_TYPE_GPLUGD /* Machine type */
24 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
25 
26 /*
27  * There is no internal RAM in ARMADA100, using DRAM
28  * TBD: dcache to be used for this
29  */
30 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE - 0x00200000)
31 
32 /*
33  * Commands configuration
34  */
35 
36 /* Network configuration */
37 #ifdef CONFIG_CMD_NET
38 #define CONFIG_ARMADA100_FEC
39 
40 /* DHCP Support */
41 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY		50000
42 #endif /* CONFIG_CMD_NET */
43 
44 /* GPIO Support */
45 #define CONFIG_MARVELL_GPIO
46 
47 /* PHY configuration */
48 #define CONFIG_RESET_PHY_R
49 /* 88E3015 register definition */
50 #define PHY_LED_PAR_SEL_REG		22
51 #define PHY_LED_MAN_REG			25
52 #define PHY_LED_VAL			0x5b	/* LINK LED1, ACT LED2 */
53 /* GPIO Configuration for PHY */
54 #define CONFIG_SYS_GPIO_PHY_RST		104	/* GPIO104 */
55 
56 /* Flash Support */
57 
58 /*
59  * mv-common.h should be defined after CMD configs since it used them
60  * to enable certain macros
61  */
62 #include "mv-common.h"
63 
64 #ifdef CONFIG_SYS_NS16550_COM1
65 #undef CONFIG_SYS_NS16550_COM1
66 #endif /* CONFIG_SYS_NS16550_COM1 */
67 
68 #define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
69 
70 /*
71  * Environment variables configurations
72  */
73 
74 #ifdef CONFIG_CMD_USB
75 #define CONFIG_USB_EHCI_ARMADA100
76 #define CONFIG_EHCI_IS_TDI
77 #endif /* CONFIG_CMD_USB */
78 
79 #endif	/* __CONFIG_GPLUGD_H */
80