1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright 2017 NXP 4 */ 5 6 #ifndef __LS1088A_QDS_H 7 #define __LS1088A_QDS_H 8 9 #include "ls1088a_common.h" 10 11 12 #ifndef __ASSEMBLY__ 13 unsigned long get_board_sys_clk(void); 14 unsigned long get_board_ddr_clk(void); 15 #endif 16 17 #ifdef CONFIG_TFABOOT 18 #define CONFIG_SYS_MMC_ENV_DEV 0 19 20 #define CONFIG_MISC_INIT_R 21 #else 22 #if defined(CONFIG_QSPI_BOOT) 23 #elif defined(CONFIG_SD_BOOT) 24 #define CONFIG_SYS_MMC_ENV_DEV 0 25 #endif 26 #endif 27 28 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 29 #define CONFIG_QIXIS_I2C_ACCESS 30 #define SYS_NO_FLASH 31 32 #undef CONFIG_CMD_IMLS 33 #define CONFIG_SYS_CLK_FREQ 100000000 34 #define CONFIG_DDR_CLK_FREQ 100000000 35 #else 36 #define CONFIG_QIXIS_I2C_ACCESS 37 #ifndef CONFIG_DM_I2C 38 #define CONFIG_SYS_I2C_EARLY_INIT 39 #endif 40 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() 41 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 42 #endif 43 44 #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) 45 #define COUNTER_FREQUENCY 25000000 /* 25MHz */ 46 47 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 48 49 #define CONFIG_DDR_SPD 50 #define CONFIG_DDR_ECC 51 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 52 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 53 #define SPD_EEPROM_ADDRESS 0x51 54 #define CONFIG_SYS_SPD_BUS_NUM 0 55 56 57 /* 58 * IFC Definitions 59 */ 60 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) 61 #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) 62 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 63 #define CONFIG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024) 64 65 #define CONFIG_SYS_NOR0_CSPR \ 66 (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 67 CSPR_PORT_SIZE_16 | \ 68 CSPR_MSEL_NOR | \ 69 CSPR_V) 70 #define CONFIG_SYS_NOR0_CSPR_EARLY \ 71 (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ 72 CSPR_PORT_SIZE_16 | \ 73 CSPR_MSEL_NOR | \ 74 CSPR_V) 75 #define CONFIG_SYS_NOR1_CSPR \ 76 (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS) | \ 77 CSPR_PORT_SIZE_16 | \ 78 CSPR_MSEL_NOR | \ 79 CSPR_V) 80 #define CONFIG_SYS_NOR1_CSPR_EARLY \ 81 (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY) | \ 82 CSPR_PORT_SIZE_16 | \ 83 CSPR_MSEL_NOR | \ 84 CSPR_V) 85 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(12) 86 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 87 FTIM0_NOR_TEADC(0x5) | \ 88 FTIM0_NOR_TAVDS(0x6) | \ 89 FTIM0_NOR_TEAHC(0x5)) 90 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 91 FTIM1_NOR_TRAD_NOR(0x1a) | \ 92 FTIM1_NOR_TSEQRAD_NOR(0x13)) 93 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x8) | \ 94 FTIM2_NOR_TCH(0x8) | \ 95 FTIM2_NOR_TWPH(0xe) | \ 96 FTIM2_NOR_TWP(0x1c)) 97 #define CONFIG_SYS_NOR_FTIM3 0x04000000 98 #define CONFIG_SYS_IFC_CCR 0x01000000 99 100 #ifndef SYS_NO_FLASH 101 #define CONFIG_SYS_FLASH_QUIET_TEST 102 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 103 104 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 105 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 106 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 107 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 108 109 #define CONFIG_SYS_FLASH_EMPTY_INFO 110 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ 111 CONFIG_SYS_FLASH_BASE + 0x40000000} 112 #endif 113 #endif 114 115 #define CONFIG_NAND_FSL_IFC 116 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 117 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 118 119 #define CONFIG_SYS_NAND_CSPR_EXT (0x0) 120 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 121 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 122 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 123 | CSPR_V) 124 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) 125 126 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 127 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 128 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 129 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 130 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 131 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 132 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 133 134 #define CONFIG_SYS_NAND_ONFI_DETECTION 135 136 /* ONFI NAND Flash mode0 Timing Params */ 137 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 138 FTIM0_NAND_TWP(0x18) | \ 139 FTIM0_NAND_TWCHT(0x07) | \ 140 FTIM0_NAND_TWH(0x0a)) 141 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 142 FTIM1_NAND_TWBE(0x39) | \ 143 FTIM1_NAND_TRR(0x0e) | \ 144 FTIM1_NAND_TRP(0x18)) 145 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 146 FTIM2_NAND_TREH(0x0a) | \ 147 FTIM2_NAND_TWHRE(0x1e)) 148 #define CONFIG_SYS_NAND_FTIM3 0x0 149 150 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 151 #define CONFIG_SYS_MAX_NAND_DEVICE 1 152 #define CONFIG_MTD_NAND_VERIFY_WRITE 153 #define CONFIG_CMD_NAND 154 155 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 156 157 #define CONFIG_FSL_QIXIS 158 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 159 #define QIXIS_LBMAP_SWITCH 6 160 #define QIXIS_QMAP_MASK 0xe0 161 #define QIXIS_QMAP_SHIFT 5 162 #define QIXIS_LBMAP_MASK 0x0f 163 #define QIXIS_LBMAP_SHIFT 0 164 #define QIXIS_LBMAP_DFLTBANK 0x0e 165 #define QIXIS_LBMAP_ALTBANK 0x2e 166 #define QIXIS_LBMAP_SD 0x00 167 #define QIXIS_LBMAP_EMMC 0x00 168 #define QIXIS_LBMAP_IFC 0x00 169 #define QIXIS_LBMAP_SD_QSPI 0x0e 170 #define QIXIS_LBMAP_QSPI 0x0e 171 #define QIXIS_RCW_SRC_IFC 0x25 172 #define QIXIS_RCW_SRC_SD 0x40 173 #define QIXIS_RCW_SRC_EMMC 0x41 174 #define QIXIS_RCW_SRC_QSPI 0x62 175 #define QIXIS_RST_CTL_RESET 0x41 176 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 177 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 178 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 179 #define QIXIS_RST_FORCE_MEM 0x01 180 #define QIXIS_STAT_PRES1 0xb 181 #define QIXIS_SDID_MASK 0x07 182 #define QIXIS_ESDHC_NO_ADAPTER 0x7 183 184 #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) 185 #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ 186 | CSPR_PORT_SIZE_8 \ 187 | CSPR_MSEL_GPCM \ 188 | CSPR_V) 189 #define SYS_FPGA_CSPR_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 190 | CSPR_PORT_SIZE_8 \ 191 | CSPR_MSEL_GPCM \ 192 | CSPR_V) 193 194 #define SYS_FPGA_AMASK IFC_AMASK(64 * 1024) 195 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 196 #define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0) 197 #else 198 #define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(12) 199 #endif 200 /* QIXIS Timing parameters*/ 201 #define SYS_FPGA_CS_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 202 FTIM0_GPCM_TEADC(0x0e) | \ 203 FTIM0_GPCM_TEAHC(0x0e)) 204 #define SYS_FPGA_CS_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ 205 FTIM1_GPCM_TRAD(0x3f)) 206 #define SYS_FPGA_CS_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ 207 FTIM2_GPCM_TCH(0xf) | \ 208 FTIM2_GPCM_TWP(0x3E)) 209 #define SYS_FPGA_CS_FTIM3 0x0 210 211 #ifdef CONFIG_TFABOOT 212 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 213 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY 214 #define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR 215 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 216 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 217 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 218 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 219 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 220 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 221 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 222 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY 223 #define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR 224 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK_EARLY 225 #define CONFIG_SYS_AMASK1_FINAL CONFIG_SYS_NOR_AMASK 226 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 227 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 228 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 229 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 230 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 231 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 232 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 233 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 234 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 235 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 236 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 237 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 238 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 239 #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT 240 #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR 241 #define CONFIG_SYS_CSPR3_FINAL SYS_FPGA_CSPR_FINAL 242 #define CONFIG_SYS_AMASK3 SYS_FPGA_AMASK 243 #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR 244 #define CONFIG_SYS_CS3_FTIM0 SYS_FPGA_CS_FTIM0 245 #define CONFIG_SYS_CS3_FTIM1 SYS_FPGA_CS_FTIM1 246 #define CONFIG_SYS_CS3_FTIM2 SYS_FPGA_CS_FTIM2 247 #define CONFIG_SYS_CS3_FTIM3 SYS_FPGA_CS_FTIM3 248 #else 249 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 250 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 251 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 252 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 253 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 254 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 255 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 256 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 257 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 258 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_FPGA_CSPR_EXT 259 #define CONFIG_SYS_CSPR2 CONFIG_SYS_FPGA_CSPR 260 #define CONFIG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL 261 #define CONFIG_SYS_AMASK2 SYS_FPGA_AMASK 262 #define CONFIG_SYS_CSOR2 CONFIG_SYS_FPGA_CSOR 263 #define CONFIG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0 264 #define CONFIG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1 265 #define CONFIG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2 266 #define CONFIG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3 267 #else 268 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 269 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY 270 #define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR 271 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 272 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 273 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 274 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 275 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 276 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 277 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 278 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY 279 #define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR 280 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK_EARLY 281 #define CONFIG_SYS_AMASK1_FINAL CONFIG_SYS_NOR_AMASK 282 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 283 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 284 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 285 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 286 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 287 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 288 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 289 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 290 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 291 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 292 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 293 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 294 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 295 #define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT 296 #define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR 297 #define CONFIG_SYS_CSPR3_FINAL SYS_FPGA_CSPR_FINAL 298 #define CONFIG_SYS_AMASK3 SYS_FPGA_AMASK 299 #define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR 300 #define CONFIG_SYS_CS3_FTIM0 SYS_FPGA_CS_FTIM0 301 #define CONFIG_SYS_CS3_FTIM1 SYS_FPGA_CS_FTIM1 302 #define CONFIG_SYS_CS3_FTIM2 SYS_FPGA_CS_FTIM2 303 #define CONFIG_SYS_CS3_FTIM3 SYS_FPGA_CS_FTIM3 304 #endif 305 #endif 306 307 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 308 309 /* 310 * I2C bus multiplexer 311 */ 312 #define I2C_MUX_PCA_ADDR_PRI 0x77 313 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */ 314 #define I2C_RETIMER_ADDR 0x18 315 #define I2C_RETIMER_ADDR2 0x19 316 #define I2C_MUX_CH_DEFAULT 0x8 317 #define I2C_MUX_CH5 0xD 318 319 #define I2C_MUX_CH_VOL_MONITOR 0xA 320 321 /* Voltage monitor on channel 2*/ 322 #define I2C_VOL_MONITOR_ADDR 0x63 323 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 324 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 325 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 326 #define I2C_SVDD_MONITOR_ADDR 0x4F 327 328 #define CONFIG_VID_FLS_ENV "ls1088aqds_vdd_mv" 329 #define CONFIG_VID 330 331 /* The lowest and highest voltage allowed for LS1088AQDS */ 332 #define VDD_MV_MIN 819 333 #define VDD_MV_MAX 1212 334 335 #define CONFIG_VOL_MONITOR_LTC3882_SET 336 #define CONFIG_VOL_MONITOR_LTC3882_READ 337 338 /* PM Bus commands code for LTC3882*/ 339 #define PMBUS_CMD_PAGE 0x0 340 #define PMBUS_CMD_READ_VOUT 0x8B 341 #define PMBUS_CMD_PAGE_PLUS_WRITE 0x05 342 #define PMBUS_CMD_VOUT_COMMAND 0x21 343 344 #define PWM_CHANNEL0 0x0 345 346 /* 347 * RTC configuration 348 */ 349 #define RTC 350 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ 351 352 /* EEPROM */ 353 #define CONFIG_ID_EEPROM 354 #define CONFIG_SYS_I2C_EEPROM_NXID 355 #define CONFIG_SYS_EEPROM_BUS_NUM 0 356 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 357 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 358 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 359 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 360 361 /* QSPI device */ 362 #if defined(CONFIG_TFABOOT) || \ 363 defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) 364 #define FSL_QSPI_FLASH_SIZE (1 << 26) 365 #define FSL_QSPI_FLASH_NUM 2 366 367 #endif 368 369 #ifdef CONFIG_FSL_DSPI 370 #define CONFIG_SPI_FLASH_STMICRO 371 #define CONFIG_SPI_FLASH_SST 372 #define CONFIG_SPI_FLASH_EON 373 #if !defined(CONFIG_TFABOOT) && \ 374 !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) 375 #endif 376 #endif 377 378 #define CONFIG_CMD_MEMINFO 379 #define CONFIG_SYS_MEMTEST_START 0x80000000 380 #define CONFIG_SYS_MEMTEST_END 0x9fffffff 381 382 #ifdef CONFIG_SPL_BUILD 383 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 384 #else 385 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 386 #endif 387 388 #define CONFIG_FSL_MEMAC 389 390 /* MMC */ 391 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 392 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \ 393 QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER) 394 395 /* Initial environment variables */ 396 #ifdef CONFIG_NXP_ESBC 397 #undef CONFIG_EXTRA_ENV_SETTINGS 398 #define CONFIG_EXTRA_ENV_SETTINGS \ 399 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 400 "loadaddr=0x90100000\0" \ 401 "kernel_addr=0x100000\0" \ 402 "ramdisk_addr=0x800000\0" \ 403 "ramdisk_size=0x2000000\0" \ 404 "fdt_high=0xa0000000\0" \ 405 "initrd_high=0xffffffffffffffff\0" \ 406 "kernel_start=0x1000000\0" \ 407 "kernel_load=0xa0000000\0" \ 408 "kernel_size=0x2800000\0" \ 409 "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;" \ 410 "sf read 0xa0700000 0x700000 0x4000; esbc_validate 0xa0700000;" \ 411 "sf read 0xa0e00000 0xe00000 0x100000;" \ 412 "sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;" \ 413 "fsl_mc start mc 0xa0a00000 0xa0e00000\0" \ 414 "mcmemsize=0x70000000 \0" 415 #else /* if !(CONFIG_NXP_ESBC) */ 416 #ifdef CONFIG_TFABOOT 417 #define QSPI_MC_INIT_CMD \ 418 "sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ 419 "sf read 0x80100000 0xE00000 0x100000;" \ 420 "fsl_mc start mc 0x80000000 0x80100000\0" 421 #define SD_MC_INIT_CMD \ 422 "mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ 423 "mmc read 0x80100000 0x7000 0x800;" \ 424 "fsl_mc start mc 0x80000000 0x80100000\0" 425 #define IFC_MC_INIT_CMD \ 426 "fsl_mc start mc 0x580A00000 0x580E00000\0" 427 428 #undef CONFIG_EXTRA_ENV_SETTINGS 429 #define CONFIG_EXTRA_ENV_SETTINGS \ 430 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 431 "loadaddr=0x90100000\0" \ 432 "kernel_addr=0x100000\0" \ 433 "kernel_addr_sd=0x800\0" \ 434 "ramdisk_addr=0x800000\0" \ 435 "ramdisk_size=0x2000000\0" \ 436 "fdt_high=0xa0000000\0" \ 437 "initrd_high=0xffffffffffffffff\0" \ 438 "kernel_start=0x1000000\0" \ 439 "kernel_start_sd=0x8000\0" \ 440 "kernel_load=0xa0000000\0" \ 441 "kernel_size=0x2800000\0" \ 442 "kernel_size_sd=0x14000\0" \ 443 "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ 444 "sf read 0x80100000 0xE00000 0x100000;" \ 445 "fsl_mc start mc 0x80000000 0x80100000\0" \ 446 "mcmemsize=0x70000000 \0" 447 #define QSPI_NOR_BOOTCOMMAND "sf probe 0:0;" \ 448 "sf read 0x80001000 0xd00000 0x100000;"\ 449 " fsl_mc lazyapply dpl 0x80001000 &&" \ 450 " sf read $kernel_load $kernel_start" \ 451 " $kernel_size && bootm $kernel_load" 452 #define SD_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\ 453 " fsl_mc lazyapply dpl 0x80001000 &&" \ 454 " mmc read $kernel_load $kernel_start_sd" \ 455 " $kernel_size_sd && bootm $kernel_load" 456 #define IFC_NOR_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \ 457 " cp.b $kernel_start $kernel_load" \ 458 " $kernel_size && bootm $kernel_load" 459 #else 460 #if defined(CONFIG_QSPI_BOOT) 461 #undef CONFIG_EXTRA_ENV_SETTINGS 462 #define CONFIG_EXTRA_ENV_SETTINGS \ 463 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 464 "loadaddr=0x90100000\0" \ 465 "kernel_addr=0x100000\0" \ 466 "ramdisk_addr=0x800000\0" \ 467 "ramdisk_size=0x2000000\0" \ 468 "fdt_high=0xa0000000\0" \ 469 "initrd_high=0xffffffffffffffff\0" \ 470 "kernel_start=0x1000000\0" \ 471 "kernel_load=0xa0000000\0" \ 472 "kernel_size=0x2800000\0" \ 473 "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;" \ 474 "sf read 0x80100000 0xE00000 0x100000;" \ 475 "fsl_mc start mc 0x80000000 0x80100000\0" \ 476 "mcmemsize=0x70000000 \0" 477 #elif defined(CONFIG_SD_BOOT) 478 #undef CONFIG_EXTRA_ENV_SETTINGS 479 #define CONFIG_EXTRA_ENV_SETTINGS \ 480 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 481 "loadaddr=0x90100000\0" \ 482 "kernel_addr=0x800\0" \ 483 "ramdisk_addr=0x800000\0" \ 484 "ramdisk_size=0x2000000\0" \ 485 "fdt_high=0xa0000000\0" \ 486 "initrd_high=0xffffffffffffffff\0" \ 487 "kernel_start=0x8000\0" \ 488 "kernel_load=0xa0000000\0" \ 489 "kernel_size=0x14000\0" \ 490 "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ 491 "mmc read 0x80100000 0x7000 0x800;" \ 492 "fsl_mc start mc 0x80000000 0x80100000\0" \ 493 "mcmemsize=0x70000000 \0" 494 #else /* NOR BOOT */ 495 #undef CONFIG_EXTRA_ENV_SETTINGS 496 #define CONFIG_EXTRA_ENV_SETTINGS \ 497 "hwconfig=fsl_ddr:bank_intlv=auto\0" \ 498 "loadaddr=0x90100000\0" \ 499 "kernel_addr=0x100000\0" \ 500 "ramdisk_addr=0x800000\0" \ 501 "ramdisk_size=0x2000000\0" \ 502 "fdt_high=0xa0000000\0" \ 503 "initrd_high=0xffffffffffffffff\0" \ 504 "kernel_start=0x1000000\0" \ 505 "kernel_load=0xa0000000\0" \ 506 "kernel_size=0x2800000\0" \ 507 "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0" \ 508 "mcmemsize=0x70000000 \0" 509 #endif 510 #endif /* CONFIG_TFABOOT */ 511 #endif /* CONFIG_NXP_ESBC */ 512 513 #ifdef CONFIG_FSL_MC_ENET 514 #define CONFIG_FSL_MEMAC 515 #define CONFIG_PHYLIB 516 #define CONFIG_PHYLIB_10G 517 #define CONFIG_PHY_VITESSE 518 #define CONFIG_PHY_REALTEK 519 #define CONFIG_PHY_TERANETICS 520 #define RGMII_PHY1_ADDR 0x1 521 #define RGMII_PHY2_ADDR 0x2 522 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 523 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d 524 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 525 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F 526 527 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0 528 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1 529 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2 530 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3 531 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4 532 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5 533 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6 534 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7 535 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8 536 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9 537 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa 538 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb 539 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc 540 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd 541 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe 542 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf 543 544 #define CONFIG_ETHPRIME "DPMAC1@xgmii" 545 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 546 547 #endif 548 549 #define BOOT_TARGET_DEVICES(func) \ 550 func(USB, usb, 0) \ 551 func(MMC, mmc, 0) \ 552 func(SCSI, scsi, 0) \ 553 func(DHCP, dhcp, na) 554 #include <config_distro_bootcmd.h> 555 556 #include <asm/fsl_secure_boot.h> 557 558 #endif /* __LS1088A_QDS_H */ 559