• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * wpa_supplicant/hostapd control interface library
3  * Copyright (c) 2004-2017, Jouni Malinen <j@w1.fi>
4  *
5  * This software may be distributed under the terms of the BSD license.
6  * See README for more details.
7  */
8 
9 #ifndef WPA_CTRL_H
10 #define WPA_CTRL_H
11 
12 #ifdef  __cplusplus
13 extern "C" {
14 #endif
15 
16 /* wpa_supplicant control interface - fixed message prefixes */
17 
18 /** Interactive request for identity/password/pin */
19 #define WPA_CTRL_REQ "CTRL-REQ-"
20 
21 /** Response to identity/password/pin request */
22 #define WPA_CTRL_RSP "CTRL-RSP-"
23 
24 /* Event messages with fixed prefix */
25 /** Authentication completed successfully and data connection enabled */
26 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
27 /** Disconnected, data connection is not available */
28 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
29 /** Association rejected during connection attempt */
30 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
31 /** Authentication rejected during connection attempt */
32 #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
33 /** wpa_supplicant is exiting */
34 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
35 /** Password change was completed successfully */
36 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
37 /** EAP-Request/Notification received */
38 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
39 /** EAP authentication started (EAP-Request/Identity received) */
40 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
41 /** EAP method proposed by the server */
42 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
43 /** EAP method selected */
44 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
45 /** EAP peer certificate from TLS */
46 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
47 /** EAP peer certificate alternative subject name component from TLS */
48 #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
49 /** EAP TLS certificate chain validation error */
50 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
51 /** EAP status */
52 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
53 /** Retransmit the previous request packet */
54 #define WPA_EVENT_EAP_RETRANSMIT "CTRL-EVENT-EAP-RETRANSMIT "
55 #define WPA_EVENT_EAP_RETRANSMIT2 "CTRL-EVENT-EAP-RETRANSMIT2 "
56 /** EAP authentication completed successfully */
57 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
58 #define WPA_EVENT_EAP_SUCCESS2 "CTRL-EVENT-EAP-SUCCESS2 "
59 /** EAP authentication failed (EAP-Failure received) */
60 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
61 #define WPA_EVENT_EAP_FAILURE2 "CTRL-EVENT-EAP-FAILURE2 "
62 /** EAP authentication failed due to no response received */
63 #define WPA_EVENT_EAP_TIMEOUT_FAILURE "CTRL-EVENT-EAP-TIMEOUT-FAILURE "
64 #define WPA_EVENT_EAP_TIMEOUT_FAILURE2 "CTRL-EVENT-EAP-TIMEOUT-FAILURE2 "
65 #define WPA_EVENT_EAP_ERROR_CODE "EAP-ERROR-CODE "
66 /** Network block temporarily disabled (e.g., due to authentication failure) */
67 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
68 /** Temporarily disabled network block re-enabled */
69 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
70 /** New scan started */
71 #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
72 /** New scan results available */
73 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
74 /** Scan command failed */
75 #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
76 /** wpa_supplicant state change */
77 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
78 /** A new BSS entry was added (followed by BSS entry id and BSSID) */
79 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
80 /** A BSS entry was removed (followed by BSS entry id and BSSID) */
81 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
82 /** No suitable network was found */
83 #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
84 /** Change in the signal level was reported by the driver */
85 #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
86 /** Beacon loss reported by the driver */
87 #define WPA_EVENT_BEACON_LOSS "CTRL-EVENT-BEACON-LOSS "
88 /** Regulatory domain channel */
89 #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
90 /** Channel switch started (followed by freq=<MHz> and other channel parameters)
91  */
92 #define WPA_EVENT_CHANNEL_SWITCH_STARTED "CTRL-EVENT-STARTED-CHANNEL-SWITCH "
93 /** Channel switch (followed by freq=<MHz> and other channel parameters) */
94 #define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH "
95 /** SAE authentication failed due to unknown password identifier */
96 #define WPA_EVENT_SAE_UNKNOWN_PASSWORD_IDENTIFIER \
97 	"CTRL-EVENT-SAE-UNKNOWN-PASSWORD-IDENTIFIER "
98 /** Unprotected Beacon frame dropped */
99 #define WPA_EVENT_UNPROT_BEACON "CTRL-EVENT-UNPROT-BEACON "
100 
101 /** IP subnet status change notification
102  *
103  * When using an offloaded roaming mechanism where driver/firmware takes care
104  * of roaming and IP subnet validation checks post-roaming, this event can
105  * indicate whether IP subnet has changed.
106  *
107  * The event has a status=<0/1/2> parameter where
108  * 0 = unknown
109  * 1 = IP subnet unchanged (can continue to use the old IP address)
110  * 2 = IP subnet changed (need to get a new IP address)
111  */
112 #define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE "
113 
114 /** RSN IBSS 4-way handshakes completed with specified peer */
115 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
116 
117 /** Notification of frequency conflict due to a concurrent operation.
118  *
119  * The indicated network is disabled and needs to be re-enabled before it can
120  * be used again.
121  */
122 #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
123 /** Frequency ranges that the driver recommends to avoid */
124 #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
125 /** WPS overlap detected in PBC mode */
126 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
127 /** Available WPS AP with active PBC found in scan results */
128 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
129 /** Available WPS AP with our address as authorized in scan results */
130 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
131 /** Available WPS AP with recently selected PIN registrar found in scan results
132  */
133 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
134 /** Available WPS AP found in scan results */
135 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
136 /** A new credential received */
137 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
138 /** M2D received */
139 #define WPS_EVENT_M2D "WPS-M2D "
140 /** WPS registration failed after M2/M2D */
141 #define WPS_EVENT_FAIL "WPS-FAIL "
142 /** WPS registration completed successfully */
143 #define WPS_EVENT_SUCCESS "WPS-SUCCESS "
144 /** WPS enrollment attempt timed out and was terminated */
145 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
146 /* PBC mode was activated */
147 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
148 /* PBC mode was disabled */
149 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
150 
151 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
152 
153 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
154 
155 /* WPS ER events */
156 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
157 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
158 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
159 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
160 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
161 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
162 
163 /* DPP events */
164 #define DPP_EVENT_AUTH_SUCCESS "DPP-AUTH-SUCCESS "
165 #define DPP_EVENT_AUTH_INIT_FAILED "DPP-AUTH-INIT-FAILED "
166 #define DPP_EVENT_NOT_COMPATIBLE "DPP-NOT-COMPATIBLE "
167 #define DPP_EVENT_RESPONSE_PENDING "DPP-RESPONSE-PENDING "
168 #define DPP_EVENT_SCAN_PEER_QR_CODE "DPP-SCAN-PEER-QR-CODE "
169 #define DPP_EVENT_AUTH_DIRECTION "DPP-AUTH-DIRECTION "
170 #define DPP_EVENT_CONF_RECEIVED "DPP-CONF-RECEIVED "
171 #define DPP_EVENT_CONF_SENT "DPP-CONF-SENT "
172 #define DPP_EVENT_CONF_FAILED "DPP-CONF-FAILED "
173 #define DPP_EVENT_CONN_STATUS_RESULT "DPP-CONN-STATUS-RESULT "
174 #define DPP_EVENT_CONFOBJ_AKM "DPP-CONFOBJ-AKM "
175 #define DPP_EVENT_CONFOBJ_SSID "DPP-CONFOBJ-SSID "
176 #define DPP_EVENT_CONFOBJ_SSID_CHARSET "DPP-CONFOBJ-SSID-CHARSET "
177 #define DPP_EVENT_CONFOBJ_PASS "DPP-CONFOBJ-PASS "
178 #define DPP_EVENT_CONFOBJ_PSK "DPP-CONFOBJ-PSK "
179 #define DPP_EVENT_CONNECTOR "DPP-CONNECTOR "
180 #define DPP_EVENT_C_SIGN_KEY "DPP-C-SIGN-KEY "
181 #define DPP_EVENT_NET_ACCESS_KEY "DPP-NET-ACCESS-KEY "
182 #define DPP_EVENT_MISSING_CONNECTOR "DPP-MISSING-CONNECTOR "
183 #define DPP_EVENT_NETWORK_ID "DPP-NETWORK-ID "
184 #define DPP_EVENT_CONFIGURATOR_ID "DPP-CONFIGURATOR-ID "
185 #define DPP_EVENT_RX "DPP-RX "
186 #define DPP_EVENT_TX "DPP-TX "
187 #define DPP_EVENT_TX_STATUS "DPP-TX-STATUS "
188 #define DPP_EVENT_FAIL "DPP-FAIL "
189 #define DPP_EVENT_PKEX_T_LIMIT "DPP-PKEX-T-LIMIT "
190 #define DPP_EVENT_INTRO "DPP-INTRO "
191 #define DPP_EVENT_CONF_REQ_RX "DPP-CONF-REQ-RX "
192 #define DPP_EVENT_CHIRP_STOPPED "DPP-CHIRP-STOPPED "
193 #define DPP_EVENT_MUD_URL "DPP-MUD-URL "
194 #define DPP_EVENT_BAND_SUPPORT "DPP-BAND-SUPPORT "
195 
196 /* MESH events */
197 #define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
198 #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
199 #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
200 #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
201 /** Mesh SAE authentication failure. Wrong password suspected. */
202 #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
203 #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
204 
205 /* WMM AC events */
206 #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
207 #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
208 #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
209 
210 /** P2P device found */
211 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
212 
213 /** P2P device lost */
214 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
215 
216 /** A P2P device requested GO negotiation, but we were not ready to start the
217  * negotiation */
218 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
219 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
220 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
221 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
222 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
223 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
224 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
225 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
226 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
227 /* parameters: <peer address> <PIN> */
228 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
229 /* parameters: <peer address> */
230 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
231 /* parameters: <peer address> */
232 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
233 /* parameters: <peer address> */
234 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
235 /* parameters: <peer address> <status> */
236 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
237 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
238 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
239 /* parameters: <src addr> <update indicator> <TLVs> */
240 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
241 #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
242 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
243 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
244 #define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED "
245 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
246 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
247 #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
248 #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
249 #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
250 #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
251 #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
252 #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
253 
254 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
255 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
256 #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
257 
258 #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
259 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
260 
261 #define INTERWORKING_AP "INTERWORKING-AP "
262 #define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED "
263 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
264 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
265 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
266 
267 /* Credential block added; parameters: <id> */
268 #define CRED_ADDED "CRED-ADDED "
269 /* Credential block modified; parameters: <id> <field> */
270 #define CRED_MODIFIED "CRED-MODIFIED "
271 /* Credential block removed; parameters: <id> */
272 #define CRED_REMOVED "CRED-REMOVED "
273 
274 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
275 /* parameters: <addr> <dialog_token> <freq> */
276 #define GAS_QUERY_START "GAS-QUERY-START "
277 /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
278 #define GAS_QUERY_DONE "GAS-QUERY-DONE "
279 
280 /* parameters: <addr> <result> */
281 #define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
282 
283 #define RX_ANQP "RX-ANQP "
284 #define RX_HS20_ANQP "RX-HS20-ANQP "
285 #define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON "
286 #define RX_HS20_ICON "RX-HS20-ICON "
287 #define RX_MBO_ANQP "RX-MBO-ANQP "
288 
289 /* parameters: <Venue Number> <Venue URL> */
290 #define RX_VENUE_URL "RX-VENUE-URL "
291 
292 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
293 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
294 #define HS20_T_C_ACCEPTANCE "HS20-T-C-ACCEPTANCE "
295 
296 #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
297 #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
298 
299 #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
300 #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
301 
302 /* hostapd control interface - fixed message prefixes */
303 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
304 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
305 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
306 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
307 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
308 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
309 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
310 #define WPS_EVENT_PIN_ACTIVE "WPS-PIN-ACTIVE "
311 #define WPS_EVENT_CANCEL "WPS-CANCEL "
312 #define AP_STA_CONNECTED "AP-STA-CONNECTED "
313 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
314 #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
315 #define AP_STA_POLL_OK "AP-STA-POLL-OK "
316 
317 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
318 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
319 
320 #define HS20_T_C_FILTERING_ADD "HS20-T-C-FILTERING-ADD "
321 #define HS20_T_C_FILTERING_REMOVE "HS20-T-C-FILTERING-REMOVE "
322 
323 #define AP_EVENT_ENABLED "AP-ENABLED "
324 #define AP_EVENT_DISABLED "AP-DISABLED "
325 
326 #define INTERFACE_ENABLED "INTERFACE-ENABLED "
327 #define INTERFACE_DISABLED "INTERFACE-DISABLED "
328 
329 #define ACS_EVENT_STARTED "ACS-STARTED "
330 #define ACS_EVENT_COMPLETED "ACS-COMPLETED "
331 #define ACS_EVENT_FAILED "ACS-FAILED "
332 
333 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
334 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
335 #define DFS_EVENT_CAC_START "DFS-CAC-START "
336 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
337 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
338 #define DFS_EVENT_PRE_CAC_EXPIRED "DFS-PRE-CAC-EXPIRED "
339 
340 #define AP_CSA_FINISHED "AP-CSA-FINISHED "
341 
342 #define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED "
343 #define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON "
344 
345 /* BSS Transition Management Response frame received */
346 #define BSS_TM_RESP "BSS-TM-RESP "
347 
348 /* Collocated Interference Request frame received;
349  * parameters: <dialog token> <automatic report enabled> <report timeout> */
350 #define COLOC_INTF_REQ "COLOC-INTF-REQ "
351 /* Collocated Interference Report frame received;
352  * parameters: <STA address> <dialog token> <hexdump of report elements> */
353 #define COLOC_INTF_REPORT "COLOC-INTF-REPORT "
354 
355 /* MBO IE with cellular data connection preference received */
356 #define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE "
357 
358 /* BSS Transition Management Request received with MBO transition reason */
359 #define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON "
360 
361 /* parameters: <STA address> <dialog token> <ack=0/1> */
362 #define BEACON_REQ_TX_STATUS "BEACON-REQ-TX-STATUS "
363 /* parameters: <STA address> <dialog token> <report mode> <beacon report> */
364 #define BEACON_RESP_RX "BEACON-RESP-RX "
365 
366 /* PMKSA cache entry added; parameters: <BSSID> <network_id> */
367 #define PMKSA_CACHE_ADDED "PMKSA-CACHE-ADDED "
368 /* PMKSA cache entry removed; parameters: <BSSID> <network_id> */
369 #define PMKSA_CACHE_REMOVED "PMKSA-CACHE-REMOVED "
370 
371 /* FILS HLP Container receive; parameters: dst=<addr> src=<addr> frame=<hexdump>
372  */
373 #define FILS_HLP_RX "FILS-HLP-RX "
374 
375 /* Event to indicate Probe Request frame;
376  * parameters: sa=<STA MAC address> signal=<signal> */
377 #define RX_PROBE_REQUEST "RX-PROBE-REQUEST "
378 
379 /* Event to indicate station's HT/VHT operation mode change information */
380 #define STA_OPMODE_MAX_BW_CHANGED "STA-OPMODE-MAX-BW-CHANGED "
381 #define STA_OPMODE_SMPS_MODE_CHANGED "STA-OPMODE-SMPS-MODE-CHANGED "
382 #define STA_OPMODE_N_SS_CHANGED "STA-OPMODE-N_SS-CHANGED "
383 
384 /* New interface addition or removal for 4addr WDS SDA */
385 #define WDS_STA_INTERFACE_ADDED "WDS-STA-INTERFACE-ADDED "
386 #define WDS_STA_INTERFACE_REMOVED "WDS-STA-INTERFACE-REMOVED "
387 
388 /* Transition mode disabled indication - followed by bitmap */
389 #define TRANSITION_DISABLE "TRANSITION-DISABLE "
390 
391 #ifndef BIT
392 #define BIT(x) (1U << (x))
393 #endif
394 
395 /* BSS command information masks */
396 
397 #define WPA_BSS_MASK_ALL		0xFFFDFFFF
398 #define WPA_BSS_MASK_ID			BIT(0)
399 #define WPA_BSS_MASK_BSSID		BIT(1)
400 #define WPA_BSS_MASK_FREQ		BIT(2)
401 #define WPA_BSS_MASK_BEACON_INT		BIT(3)
402 #define WPA_BSS_MASK_CAPABILITIES	BIT(4)
403 #define WPA_BSS_MASK_QUAL		BIT(5)
404 #define WPA_BSS_MASK_NOISE		BIT(6)
405 #define WPA_BSS_MASK_LEVEL		BIT(7)
406 #define WPA_BSS_MASK_TSF		BIT(8)
407 #define WPA_BSS_MASK_AGE		BIT(9)
408 #define WPA_BSS_MASK_IE			BIT(10)
409 #define WPA_BSS_MASK_FLAGS		BIT(11)
410 #define WPA_BSS_MASK_SSID		BIT(12)
411 #define WPA_BSS_MASK_WPS_SCAN		BIT(13)
412 #define WPA_BSS_MASK_P2P_SCAN		BIT(14)
413 #define WPA_BSS_MASK_INTERNETW		BIT(15)
414 #define WPA_BSS_MASK_WIFI_DISPLAY	BIT(16)
415 #define WPA_BSS_MASK_DELIM		BIT(17)
416 #define WPA_BSS_MASK_MESH_SCAN		BIT(18)
417 #define WPA_BSS_MASK_SNR		BIT(19)
418 #define WPA_BSS_MASK_EST_THROUGHPUT	BIT(20)
419 #define WPA_BSS_MASK_FST		BIT(21)
420 #define WPA_BSS_MASK_UPDATE_IDX		BIT(22)
421 #define WPA_BSS_MASK_BEACON_IE		BIT(23)
422 #define WPA_BSS_MASK_FILS_INDICATION	BIT(24)
423 
424 
425 /* VENDOR_ELEM_* frame id values */
426 enum wpa_vendor_elem_frame {
427 	VENDOR_ELEM_PROBE_REQ_P2P = 0,
428 	VENDOR_ELEM_PROBE_RESP_P2P = 1,
429 	VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
430 	VENDOR_ELEM_BEACON_P2P_GO = 3,
431 	VENDOR_ELEM_P2P_PD_REQ = 4,
432 	VENDOR_ELEM_P2P_PD_RESP = 5,
433 	VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
434 	VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
435 	VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
436 	VENDOR_ELEM_P2P_INV_REQ = 9,
437 	VENDOR_ELEM_P2P_INV_RESP = 10,
438 	VENDOR_ELEM_P2P_ASSOC_REQ = 11,
439 	VENDOR_ELEM_P2P_ASSOC_RESP = 12,
440 	VENDOR_ELEM_ASSOC_REQ = 13,
441 	VENDOR_ELEM_PROBE_REQ = 14,
442 	NUM_VENDOR_ELEM_FRAMES
443 };
444 
445 
446 /* wpa_supplicant/hostapd control interface access */
447 
448 /**
449  * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
450  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
451  * Returns: Pointer to abstract control interface data or %NULL on failure
452  *
453  * This function is used to open a control interface to wpa_supplicant/hostapd.
454  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
455  * is configured in wpa_supplicant/hostapd and other programs using the control
456  * interface need to use matching path configuration.
457  */
458 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
459 
460 /**
461  * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
462  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
463  * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
464  *            is used.
465  * Returns: Pointer to abstract control interface data or %NULL on failure
466  *
467  * This function is used to open a control interface to wpa_supplicant/hostapd
468  * when the socket path for client need to be specified explicitly. Default
469  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
470  * socket path is /tmp.
471  */
472 struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
473 
474 
475 /**
476  * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
477  * @ctrl: Control interface data from wpa_ctrl_open()
478  *
479  * This function is used to close a control interface.
480  */
481 void wpa_ctrl_close(struct wpa_ctrl *ctrl);
482 
483 
484 /**
485  * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
486  * @ctrl: Control interface data from wpa_ctrl_open()
487  * @cmd: Command; usually, ASCII text, e.g., "PING"
488  * @cmd_len: Length of the cmd in bytes
489  * @reply: Buffer for the response
490  * @reply_len: Reply buffer length
491  * @msg_cb: Callback function for unsolicited messages or %NULL if not used
492  * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
493  *
494  * This function is used to send commands to wpa_supplicant/hostapd. Received
495  * response will be written to reply and reply_len is set to the actual length
496  * of the reply. This function will block for up to 10 seconds while waiting
497  * for the reply. If unsolicited messages are received, the blocking time may
498  * be longer.
499  *
500  * msg_cb can be used to register a callback function that will be called for
501  * unsolicited messages received while waiting for the command response. These
502  * messages may be received if wpa_ctrl_request() is called at the same time as
503  * wpa_supplicant/hostapd is sending such a message. This can happen only if
504  * the program has used wpa_ctrl_attach() to register itself as a monitor for
505  * event messages. Alternatively to msg_cb, programs can register two control
506  * interface connections and use one of them for commands and the other one for
507  * receiving event messages, in other words, call wpa_ctrl_attach() only for
508  * the control interface connection that will be used for event messages.
509  */
510 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
511 		     char *reply, size_t *reply_len,
512 		     void (*msg_cb)(char *msg, size_t len));
513 
514 
515 /**
516  * wpa_ctrl_attach - Register as an event monitor for the control interface
517  * @ctrl: Control interface data from wpa_ctrl_open()
518  * Returns: 0 on success, -1 on failure, -2 on timeout
519  *
520  * This function registers the control interface connection as a monitor for
521  * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
522  * control interface connection starts receiving event messages that can be
523  * read with wpa_ctrl_recv().
524  */
525 int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
526 
527 
528 /**
529  * wpa_ctrl_detach - Unregister event monitor from the control interface
530  * @ctrl: Control interface data from wpa_ctrl_open()
531  * Returns: 0 on success, -1 on failure, -2 on timeout
532  *
533  * This function unregisters the control interface connection as a monitor for
534  * wpa_supplicant/hostapd events, i.e., cancels the registration done with
535  * wpa_ctrl_attach().
536  */
537 int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
538 
539 
540 /**
541  * wpa_ctrl_recv - Receive a pending control interface message
542  * @ctrl: Control interface data from wpa_ctrl_open()
543  * @reply: Buffer for the message data
544  * @reply_len: Length of the reply buffer
545  * Returns: 0 on success, -1 on failure
546  *
547  * This function will receive a pending control interface message. The received
548  * response will be written to reply and reply_len is set to the actual length
549  * of the reply.
550 
551  * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
552  * must have been used to register the control interface as an event monitor.
553  */
554 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
555 
556 
557 /**
558  * wpa_ctrl_pending - Check whether there are pending event messages
559  * @ctrl: Control interface data from wpa_ctrl_open()
560  * Returns: 1 if there are pending messages, 0 if no, or -1 on error
561  *
562  * This function will check whether there are any pending control interface
563  * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
564  * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
565  * register the control interface as an event monitor.
566  */
567 int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
568 
569 
570 /**
571  * wpa_ctrl_get_fd - Get file descriptor used by the control interface
572  * @ctrl: Control interface data from wpa_ctrl_open()
573  * Returns: File descriptor used for the connection
574  *
575  * This function can be used to get the file descriptor that is used for the
576  * control interface connection. The returned value can be used, e.g., with
577  * select() while waiting for multiple events.
578  *
579  * The returned file descriptor must not be used directly for sending or
580  * receiving packets; instead, the library functions wpa_ctrl_request() and
581  * wpa_ctrl_recv() must be used for this.
582  */
583 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
584 
585 #ifdef ANDROID
586 /**
587  * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
588  * may be left over from clients that were previously connected to
589  * wpa_supplicant. This keeps these files from being orphaned in the
590  * event of crashes that prevented them from being removed as part
591  * of the normal orderly shutdown.
592  */
593 void wpa_ctrl_cleanup(void);
594 #endif /* ANDROID */
595 
596 #ifdef CONFIG_CTRL_IFACE_UDP
597 /* Port range for multiple wpa_supplicant instances and multiple VIFs */
598 #define WPA_CTRL_IFACE_PORT 9877
599 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
600 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878
601 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
602 
603 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
604 #endif /* CONFIG_CTRL_IFACE_UDP */
605 
606 
607 #ifdef  __cplusplus
608 }
609 #endif
610 
611 #endif /* WPA_CTRL_H */
612