/external/u-boot/arch/arm/mach-tegra/tegra30/ |
D | pinmux.c | 10 #define PIN(pin, f0, f1, f2, f3) \ macro 25 PIN(ULPI_DATA0_PO1, SPI3, HSI, UARTA, ULPI), 26 PIN(ULPI_DATA1_PO2, SPI3, HSI, UARTA, ULPI), 27 PIN(ULPI_DATA2_PO3, SPI3, HSI, UARTA, ULPI), 28 PIN(ULPI_DATA3_PO4, SPI3, HSI, UARTA, ULPI), 29 PIN(ULPI_DATA4_PO5, SPI2, HSI, UARTA, ULPI), 30 PIN(ULPI_DATA5_PO6, SPI2, HSI, UARTA, ULPI), 31 PIN(ULPI_DATA6_PO7, SPI2, HSI, UARTA, ULPI), 32 PIN(ULPI_DATA7_PO0, SPI2, HSI, UARTA, ULPI), 33 PIN(ULPI_CLK_PY0, SPI1, RSVD2, UARTD, ULPI), [all …]
|
/external/u-boot/arch/arm/mach-tegra/tegra114/ |
D | pinmux.c | 10 #define PIN(pin, f0, f1, f2, f3) \ macro 25 PIN(ULPI_DATA0_PO1, SPI3, HSI, UARTA, ULPI), 26 PIN(ULPI_DATA1_PO2, SPI3, HSI, UARTA, ULPI), 27 PIN(ULPI_DATA2_PO3, SPI3, HSI, UARTA, ULPI), 28 PIN(ULPI_DATA3_PO4, SPI3, HSI, UARTA, ULPI), 29 PIN(ULPI_DATA4_PO5, SPI2, HSI, UARTA, ULPI), 30 PIN(ULPI_DATA5_PO6, SPI2, HSI, UARTA, ULPI), 31 PIN(ULPI_DATA6_PO7, SPI2, HSI, UARTA, ULPI), 32 PIN(ULPI_DATA7_PO0, SPI2, HSI, UARTA, ULPI), 33 PIN(ULPI_CLK_PY0, SPI1, SPI5, UARTD, ULPI), [all …]
|
/external/u-boot/arch/arm/mach-tegra/tegra124/ |
D | pinmux.c | 10 #define PIN(pin, f0, f1, f2, f3) \ macro 25 PIN(ULPI_DATA0_PO1, SPI3, HSI, UARTA, ULPI), 26 PIN(ULPI_DATA1_PO2, SPI3, HSI, UARTA, ULPI), 27 PIN(ULPI_DATA2_PO3, SPI3, HSI, UARTA, ULPI), 28 PIN(ULPI_DATA3_PO4, SPI3, HSI, UARTA, ULPI), 29 PIN(ULPI_DATA4_PO5, SPI2, HSI, UARTA, ULPI), 30 PIN(ULPI_DATA5_PO6, SPI2, HSI, UARTA, ULPI), 31 PIN(ULPI_DATA6_PO7, SPI2, HSI, UARTA, ULPI), 32 PIN(ULPI_DATA7_PO0, SPI2, HSI, UARTA, ULPI), 33 PIN(ULPI_CLK_PY0, SPI1, SPI5, UARTD, ULPI), [all …]
|
/external/u-boot/arch/arm/mach-tegra/tegra210/ |
D | pinmux.c | 10 #define PIN(pin, f0, f1, f2, f3) \ macro 25 PIN(SDMMC1_CLK_PM0, SDMMC1, RSVD1, RSVD2, RSVD3), 26 PIN(SDMMC1_CMD_PM1, SDMMC1, SPI3, RSVD2, RSVD3), 27 PIN(SDMMC1_DAT3_PM2, SDMMC1, SPI3, RSVD2, RSVD3), 28 PIN(SDMMC1_DAT2_PM3, SDMMC1, SPI3, RSVD2, RSVD3), 29 PIN(SDMMC1_DAT1_PM4, SDMMC1, SPI3, RSVD2, RSVD3), 30 PIN(SDMMC1_DAT0_PM5, SDMMC1, RSVD1, RSVD2, RSVD3), 33 PIN(SDMMC3_CLK_PP0, SDMMC3, RSVD1, RSVD2, RSVD3), 34 PIN(SDMMC3_CMD_PP1, SDMMC3, RSVD1, RSVD2, RSVD3), 35 PIN(SDMMC3_DAT0_PP5, SDMMC3, RSVD1, RSVD2, RSVD3), [all …]
|
/external/u-boot/drivers/pinctrl/meson/ |
D | pinctrl-meson-g12a.c | 21 static const unsigned int emmc_nand_d0_pins[] = { PIN(BOOT_0, EE_OFF) }; 22 static const unsigned int emmc_nand_d1_pins[] = { PIN(BOOT_1, EE_OFF) }; 23 static const unsigned int emmc_nand_d2_pins[] = { PIN(BOOT_2, EE_OFF) }; 24 static const unsigned int emmc_nand_d3_pins[] = { PIN(BOOT_3, EE_OFF) }; 25 static const unsigned int emmc_nand_d4_pins[] = { PIN(BOOT_4, EE_OFF) }; 26 static const unsigned int emmc_nand_d5_pins[] = { PIN(BOOT_5, EE_OFF) }; 27 static const unsigned int emmc_nand_d6_pins[] = { PIN(BOOT_6, EE_OFF) }; 28 static const unsigned int emmc_nand_d7_pins[] = { PIN(BOOT_7, EE_OFF) }; 29 static const unsigned int emmc_clk_pins[] = { PIN(BOOT_8, EE_OFF) }; 30 static const unsigned int emmc_cmd_pins[] = { PIN(BOOT_10, EE_OFF) }; [all …]
|
D | pinctrl-meson-axg.c | 20 static const unsigned int emmc_nand_d0_pins[] = { PIN(BOOT_0, EE_OFF) }; 21 static const unsigned int emmc_nand_d1_pins[] = { PIN(BOOT_1, EE_OFF) }; 22 static const unsigned int emmc_nand_d2_pins[] = { PIN(BOOT_2, EE_OFF) }; 23 static const unsigned int emmc_nand_d3_pins[] = { PIN(BOOT_3, EE_OFF) }; 24 static const unsigned int emmc_nand_d4_pins[] = { PIN(BOOT_4, EE_OFF) }; 25 static const unsigned int emmc_nand_d5_pins[] = { PIN(BOOT_5, EE_OFF) }; 26 static const unsigned int emmc_nand_d6_pins[] = { PIN(BOOT_6, EE_OFF) }; 27 static const unsigned int emmc_nand_d7_pins[] = { PIN(BOOT_7, EE_OFF) }; 29 static const unsigned int emmc_clk_pins[] = { PIN(BOOT_8, EE_OFF) }; 30 static const unsigned int emmc_cmd_pins[] = { PIN(BOOT_10, EE_OFF) }; [all …]
|
D | pinctrl-meson-gxl.c | 19 PIN(BOOT_0, EE_OFF), PIN(BOOT_1, EE_OFF), PIN(BOOT_2, EE_OFF), 20 PIN(BOOT_3, EE_OFF), PIN(BOOT_4, EE_OFF), PIN(BOOT_5, EE_OFF), 21 PIN(BOOT_6, EE_OFF), PIN(BOOT_7, EE_OFF), 23 static const unsigned int emmc_clk_pins[] = { PIN(BOOT_8, EE_OFF) }; 24 static const unsigned int emmc_cmd_pins[] = { PIN(BOOT_10, EE_OFF) }; 25 static const unsigned int emmc_ds_pins[] = { PIN(BOOT_15, EE_OFF) }; 27 static const unsigned int nor_d_pins[] = { PIN(BOOT_11, EE_OFF) }; 28 static const unsigned int nor_q_pins[] = { PIN(BOOT_12, EE_OFF) }; 29 static const unsigned int nor_c_pins[] = { PIN(BOOT_13, EE_OFF) }; 30 static const unsigned int nor_cs_pins[] = { PIN(BOOT_15, EE_OFF) }; [all …]
|
D | pinctrl-meson-gxbb.c | 19 PIN(BOOT_0, EE_OFF), PIN(BOOT_1, EE_OFF), PIN(BOOT_2, EE_OFF), 20 PIN(BOOT_3, EE_OFF), PIN(BOOT_4, EE_OFF), PIN(BOOT_5, EE_OFF), 21 PIN(BOOT_6, EE_OFF), PIN(BOOT_7, EE_OFF), 23 static const unsigned int emmc_clk_pins[] = { PIN(BOOT_8, EE_OFF) }; 24 static const unsigned int emmc_cmd_pins[] = { PIN(BOOT_10, EE_OFF) }; 25 static const unsigned int emmc_ds_pins[] = { PIN(BOOT_15, EE_OFF) }; 27 static const unsigned int sdcard_d0_pins[] = { PIN(CARD_1, EE_OFF) }; 28 static const unsigned int sdcard_d1_pins[] = { PIN(CARD_0, EE_OFF) }; 29 static const unsigned int sdcard_d2_pins[] = { PIN(CARD_5, EE_OFF) }; 30 static const unsigned int sdcard_d3_pins[] = { PIN(CARD_4, EE_OFF) }; [all …]
|
D | pinctrl-meson.h | 104 #define PIN(x, b) (b + x) macro 132 #define MESON_PIN(x, b) PINCTRL_PIN(PIN(x, b), #x)
|
D | pinctrl-meson-gx.h | 38 .pins = (const unsigned int[]){ PIN(gpio, b) }, \
|
D | pinctrl-meson-axg.h | 56 .pins = (const unsigned int[]){ PIN(gpio, b) }, \
|
/external/u-boot/arch/arm/mach-tegra/tegra20/ |
D | pinmux.c | 270 #define PIN(pingrp, f0, f1, f2, f3) \ macro 279 PIN(NONE, RSVD1, RSVD2, RSVD3, RSVD4) 285 PIN(ATA, IDE, NAND, GMI, RSVD4), 286 PIN(ATB, IDE, NAND, GMI, SDIO4), 287 PIN(ATC, IDE, NAND, GMI, SDIO4), 288 PIN(ATD, IDE, NAND, GMI, SDIO4), 289 PIN(CDEV1, OSC, PLLA_OUT, PLLM_OUT1, AUDIO_SYNC), 290 PIN(CDEV2, OSC, AHB_CLK, APB_CLK, PLLP_OUT4), 291 PIN(CSUS, PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK), 292 PIN(DAP1, DAP1, RSVD2, GMI, SDIO2), [all …]
|
/external/u-boot/drivers/video/ |
D | bus_vcxk.c | 23 #define VCXK_INIT_PIN(PORT, PIN, DDR, I0O1) \ argument 25 writel(PIN, &pio->PORT.per); \ 26 writel(PIN, &pio->PORT.DDR); \ 27 writel(PIN, &pio->PORT.mddr); \ 29 writel(PIN, &pio->PORT.puer); \ 32 #define VCXK_SET_PIN(PORT, PIN) writel(PIN, &pio->PORT.sodr); argument 33 #define VCXK_CLR_PIN(PORT, PIN) writel(PIN, &pio->PORT.codr); argument 44 #define VCXK_INIT_PIN(PORT, PIN, DDR, I0O1) \ argument 45 if (I0O1) DDR |= PIN; else DDR &= ~PIN; 47 #define VCXK_SET_PIN(PORT, PIN) PORT |= PIN; argument [all …]
|
/external/wpa_supplicant_8/hostapd/ |
D | README-WPS | 16 with PIN method and push-button configuration (PBC) being the most 20 wireless network, it should be noted that the use of the PIN and 91 # Enable control interface for PBC/PIN entry 120 WPS requires either a device PIN code (usually, 8-digit number) or a 125 The PIN value used in the commands must be processed by an UI to 127 digit. "hostapd_cli wps_check_pin <PIN>" can be used to do such 128 processing. It returns FAIL if the PIN is invalid, or FAIL-CHECKSUM if 129 the checksum digit is incorrect, or the processed PIN (non-digit 130 characters removed) if the PIN is valid. 133 Registrar) in order to start PIN mode negotiation for WPS, an [all …]
|
/external/wpa_supplicant_8/wpa_supplicant/ |
D | README-WPS | 17 with PIN method and push-button configuration (PBC) being the most 21 wireless network, it should be noted that the use of the PIN and 98 WPS requires either a device PIN code (usually, 8-digit number) or a 103 The PIN value used in the commands must be processed by an UI to 105 digit. "wpa_cli wps_check_pin <PIN>" can be used to do such processing. 106 It returns FAIL if the PIN is invalid, or FAIL-CHECKSUM if the checksum 107 digit is incorrect, or the processed PIN (non-digit characters removed) 108 if the PIN is valid. 110 If the client device has a display, a random PIN has to be generated 116 This will return the generated 8-digit PIN which will then need to be [all …]
|
D | README-P2P | 140 02:01:02:03:04:05 display" would request the peer to display a PIN for 142 to enter a PIN that we display. 146 mainly used with "display" to request it to display a PIN. The "auto" 151 p2p_connect <peer device address> <pbc|pin|PIN#|p2ps> [display|keypad|p2ps] 160 The <pbc|pin|PIN#> parameter specifies the WPS provisioning 161 method. "pbc" string starts pushbutton method, "pin" string start PIN 162 method using an automatically generated PIN (which will be returned as 163 the command return code), PIN# means that a pre-selected PIN can be 164 used (e.g., 12345670). [display|keypad] is used with PIN method 165 to specify which PIN is used (display=dynamically generated random PIN [all …]
|
/external/wpa_supplicant_8/wpa_supplicant/wpa_gui-qt4/lang/ |
D | wpa_gui_de.ts | 371 <source>WPS PIN needed</source> 372 <translation>WPS PIN wird benötigt</translation> 396 <source>Enter WPS PIN</source> 397 <translation>WPS PIN Eingabe</translation> 426 <source>PIN:</source> 431 <source>PIN for </source> 436 <source>Failed to set the WPS PIN.</source> 437 <translation>Setzten des WPS PIN fehlgeschlagen.</translation> 526 <source> (Default PIN)</source> 531 <source> (User-specified PIN)</source> [all …]
|
/external/autotest/client/cros/ |
D | tpm_store.py | 20 PIN = '11111' variable in TPMStore 70 (self.CHAPS_CLIENT_COMMAND, self._directory, self.PIN))
|
/external/u-boot/doc/uImage.FIT/ |
D | signature.txt | 528 Signature PIN ....: forced 530 Max. PIN lengths .: 32 32 32 531 PIN retry counter : 3 0 3 542 PIN = '123456' Admin PIN = '12345678' 581 …ed;manufacturer=ZeitControl;serial=000xxxxxxxxx;token=OpenPGP%20card%20%28User%20PIN%20%28sig%29%29 582 Label: OpenPGP card (User PIN (sig)) 591 …315%20emulated;manufacturer=ZeitControl;serial=000xxxxxxxxx;token=OpenPGP%20card%20%28User%20PIN%29 592 Label: OpenPGP card (User PIN) 605 …d;manufacturer=ZeitControl;serial=000xxxxxxxxx;token=OpenPGP%20card%20%28User%20PIN%20%28sig%29%29" 606 …PIN (sig))' with URL 'pkcs11:model=PKCS%2315%20emulated;manufacturer=ZeitControl;serial=000xxxxxxx… [all …]
|
/external/autotest/client/site_tests/network_VPNConnect/ |
D | network_VPNConnect.py | 126 'L2TPIPsec.PIN': tpm.PIN, 144 'OpenVPN.Pkcs11.PIN': tpm.PIN,
|
/external/wpa_supplicant_8/wpa_supplicant/wpa_gui-qt4/ |
D | wpagui.ui | 321 <string>Generate PIN</string> 328 <string>PIN:</string> 348 <string>Use AP PIN</string> 355 <string>AP PIN:</string>
|
/external/u-boot/doc/ |
D | README.bus_vcxk | 41 defines the number of the I/O line PIN in the port
|
/external/autotest/client/common_lib/cros/network/ |
D | xmlrpc_security_types.py | 432 self.pin = tpm_store.PIN 436 self.pin = tpm_store.PIN
|
/external/avb/proto/crypto/keyspb/ |
D | keyspb.proto | 90 // The PIN for the specific token.
|
/external/icu/icu4c/source/data/brkitr/ |
D | de.txt | 192 "PIN.",
|