| /external/u-boot/tools/ |
| D | vybridimage.c | 48 uint8_t bit6 = (byte & (1 << 6)) ? 1 : 0; in vybridimage_sw_ecc() local
52 res |= ((bit6 ^ bit5 ^ bit3 ^ bit2) << 0); in vybridimage_sw_ecc()
54 res |= ((bit7 ^ bit6 ^ bit5 ^ bit1 ^ bit0) << 2); in vybridimage_sw_ecc()
56 res |= ((bit6 ^ bit4 ^ bit3 ^ bit2 ^ bit1 ^ bit0) << 4); in vybridimage_sw_ecc()
|
| /external/vixl/src/aarch64/ |
| D | instructions-aarch64.cc | 171 uint16_t bit6 = (bits >> 6) & 0x1; in Imm8ToFloat16() local
173 uint16_t result = (bit7 << 15) | ((4 - bit6) << 12) | (bit5_to_0 << 6); in Imm8ToFloat16()
184 uint32_t bit6 = (bits >> 6) & 0x1; in Imm8ToFP32() local
186 uint32_t result = (bit7 << 31) | ((32 - bit6) << 25) | (bit5_to_0 << 19); in Imm8ToFP32()
205 uint64_t bit6 = (bits >> 6) & 0x1; in Imm8ToFP64() local
207 uint64_t result = (bit7 << 63) | ((256 - bit6) << 54) | (bit5_to_0 << 48); in Imm8ToFP64()
|
| /external/u-boot/board/raidsonic/ib62x0/ |
| D | kwbimage.cfg | 34 # bit6: 0x0, use recommended falling edge of clk for addr/cmd
54 # bit6-0: TRFC
86 # bit6-4: 0x4, CL=5
98 # bit6: 0, DDR ODT control msb, (disabled)
108 # bit6-4: 0x7, required
|
| /external/u-boot/board/iomega/iconnect/ |
| D | kwbimage.cfg | 33 # bit6: 0x0, use recommended falling edge of clk for addr/cmd
53 # bit6-0: TRFC
85 # bit6-4: 0x4, CL=5
97 # bit6: 1, DDR ODT control msb, (disabled)
107 # bit6-4: 0x7, required
|
| /external/u-boot/board/Seagate/nas220/ |
| D | kwbimage.cfg | 57 # bit6-0: TRFC
90 # bit6-4: 4, CL=5
103 # bit6: 1, DDR ODT control msb, (disabled)
113 # bit6-4: 111, required
|
| /external/u-boot/board/Seagate/goflexhome/ |
| D | kwbimage.cfg | 59 # bit6-0: TRFC
91 # bit6-4: 4, CL=5
103 # bit6: 1, DDR ODT control msb, (disabled)
113 # bit6-4: 111, required
|
| /external/u-boot/board/Marvell/guruplug/ |
| D | kwbimage.cfg | 53 # bit6-0: TRFC
85 # bit6-4: 4, CL=5
97 # bit6: 1, DDR ODT control msb, (disabled)
107 # bit6-4: 111, required
|
| /external/u-boot/board/Seagate/dockstar/ |
| D | kwbimage.cfg | 56 # bit6-0: TRFC
88 # bit6-4: 4, CL=5
100 # bit6: 1, DDR ODT control msb, (disabled)
110 # bit6-4: 111, required
|
| /external/u-boot/board/Marvell/dreamplug/ |
| D | kwbimage.cfg | 54 # bit6-0: TRFC
86 # bit6-4: 4, CL=5
98 # bit6: 1, DDR ODT control msb, (disabled)
108 # bit6-4: 111, required
|
| /external/u-boot/board/Marvell/sheevaplug/ |
| D | kwbimage.cfg | 53 # bit6-0: TRFC
85 # bit6-4: 4, CL=5
97 # bit6: 1, DDR ODT control msb, (disabled)
107 # bit6-4: 111, required
|
| /external/u-boot/board/Synology/ds109/ |
| D | kwbimage.cfg | 57 # bit6-0: TRFC
89 # bit6-4: 4, CL=5
101 # bit6: 1, DDR ODT control msb, (disabled)
111 # bit6-4: 111, required
|
| /external/u-boot/board/buffalo/lsxl/ |
| D | kwbimage-lsxhl.cfg | 40 # bit6: 0, use recommended falling edge of clk for addr/cmd
67 # bit6-0: 0x32, 50 cycle tRFC
103 # bit6-4: 5, CAS Latency (CL) 5
116 # bit6: 0, ODT control Rtt[1] (Rtt=1, 75 ohm termination)
127 # bit6-4: 0x7 required
|
| D | kwbimage-lschl.cfg | 40 # bit6: 0, use recommended falling edge of clk for addr/cmd
67 # bit6-0: 0x23, 35 cycle tRFC
103 # bit6-4: 5, CAS Latency (CL) 5
116 # bit6: 1, ODT control Rtt[1] (Rtt=2, 150 ohm termination)
127 # bit6-4: 0x7 required
|
| /external/u-boot/board/Marvell/openrd/ |
| D | kwbimage.cfg | 53 # bit6-0: TRFC
85 # bit6-4: 4, CL=5
97 # bit6: 1, DDR ODT control msb, (disabled)
107 # bit6-4: 111, required
|
| /external/u-boot/board/LaCie/netspace_v2/ |
| D | kwbimage-is2.cfg | 53 # bit6-0: TRFC
85 # bit6-4: 4, CL=5
97 # bit6: 1, DDR ODT control msb, enabled
107 # bit6-4: 111, required
|
| D | kwbimage.cfg | 53 # bit6-0: TRFC
85 # bit6-4: 4, CL=5
97 # bit6: 1, DDR ODT control msb, enabled
107 # bit6-4: 111, required
|
| D | kwbimage-ns2l.cfg | 53 # bit6-0: TRFC
85 # bit6-4: 4, CL=5
97 # bit6: 1, DDR ODT control msb, enabled
107 # bit6-4: 111, required
|
| /external/u-boot/board/LaCie/net2big_v2/ |
| D | kwbimage.cfg | 53 # bit6-0: TRFC
85 # bit6-4: 4, CL=5
97 # bit6: 1, DDR ODT control msb, enabled
107 # bit6-4: 111, required
|
| /external/u-boot/board/cloudengines/pogo_e02/ |
| D | kwbimage.cfg | 57 # bit6-0: TRFC
89 # bit6-4: 4, CL=5
101 # bit6: 1, DDR ODT control msb, (disabled)
111 # bit6-4: 111, required
|
| /external/u-boot/board/d-link/dns325/ |
| D | kwbimage.cfg | 38 # bit6: 0, use recommended falling edge of clk for addr/cmd
63 # bit6-0: 0x33, 33 cycle tRFC
95 # bit6-4: 5, CAS Latency (CL) 5
107 # bit6: 1, ODT control Rtt[1] (Rtt=2, 150 ohm termination)
117 # bit6-4: 0x7 required
|
| /external/v8/src/codegen/arm64/ |
| D | instructions-arm64.h | 186 uint32_t bit6 = (bits >> 6) & 0x1; in Imm8ToFP32() local
188 uint32_t result = (bit7 << 31) | ((32 - bit6) << 25) | (bit5_to_0 << 19); in Imm8ToFP32()
200 uint64_t bit6 = (bits >> 6) & 0x1; in Imm8ToFP64() local
202 uint64_t result = (bit7 << 63) | ((256 - bit6) << 54) | (bit5_to_0 << 48); in Imm8ToFP64()
|
| /external/u-boot/board/keymile/km_arm/ |
| D | kwbimage.cfg | 74 # bit6-0: TRFC
109 # bit6: 1, DDR ODT control msb, enabled
119 # bit6-4: 111, required
|
| D | kwbimage-memphis.cfg | 77 # bit6-0: TRFC
112 # bit6: 0, DDR ODT control msb disabled
122 # bit6-4: 111, required
|
| /external/vixl/src/ |
| D | utils-vixl.h | 651 uint32_t bit6 = ((bits >> 29) & 0x1) << 6; in FP32ToImm8() local
654 return static_cast<uint32_t>(bit7 | bit6 | bit5_to_0); in FP32ToImm8()
663 uint64_t bit6 = ((bits >> 61) & 0x1) << 6; in FP64ToImm8() local
667 return static_cast<uint32_t>(bit7 | bit6 | bit5_to_0); in FP64ToImm8()
675 uint32_t bit6 = (bits >> 6) & 0x1; in Imm8ToFP32() local
677 uint32_t result = (bit7 << 31) | ((32 - bit6) << 25) | (bit5_to_0 << 19); in Imm8ToFP32()
688 uint64_t bit6 = (bits >> 6) & 0x1; in Imm8ToFP64() local
690 uint64_t result = (bit7 << 63) | ((256 - bit6) << 54) | (bit5_to_0 << 48); in Imm8ToFP64()
|
| /external/swiftshader/third_party/astc-encoder/Source/ |
| D | astc_color_unquantize.cpp | 395 int bit6 = (v3 >> 5) & 1; in hdr_rgbo_unpack3() local
409 scale |= bit6 << 5; in hdr_rgbo_unpack3()
433 red |= bit6 << 9; in hdr_rgbo_unpack3()
|