Name | Date | Size | #Lines | LOC | ||
---|---|---|---|---|---|---|
.. | - | - | ||||
Kconfig | D | 03-May-2024 | 204 | 16 | 10 | |
MAINTAINERS | D | 03-May-2024 | 361 | 13 | 11 | |
Makefile | D | 03-May-2024 | 120 | 8 | 1 | |
README | D | 03-May-2024 | 1.8 KiB | 71 | 54 | |
evb-rk3328.c | D | 03-May-2024 | 97 | 6 | 0 |
README
1Introduction 2============ 3 4RK3328 key features we might use in U-Boot: 5* CPU: ARMv8 64bit quad-core Cortex-A53 6* IRAM: 36KB 7* DRAM: 4GB-16MB dual-channel 8* eMMC: support eMMC 5.0/5.1, suport HS400, HS200, DDR50 9* SD/MMC: support SD 3.0, MMC 4.51 10* USB: USB2.0 EHCI host port *2 11* Display: RGB/HDMI/DP/MIPI/EDP 12 13evb key features: 14* regulator: pwm regulator for CPU B/L 15* PMIC: rk808 16* debug console: UART2 17 18In order to support Arm Trust Firmware(ATF), we need to use the 19miniloader from rockchip which: 20* do DRAM init 21* load and verify ATF image 22* load and verify U-Boot image 23 24Here is the step-by-step to boot to U-Boot on rk3328. 25 26Get the Source and prebuild binary 27================================== 28 29 > mkdir ~/evb_rk3328 30 > cd ~/evb_rk3328 31 > git clone https://github.com/ARM-software/arm-trusted-firmware.git 32 > git clone https://github.com/rockchip-linux/rkbin 33 > git clone https://github.com/rockchip-linux/rkflashtool 34 35Compile ATF 36=============== 37 38 > cd arm-trusted-firmware 39 > make realclean 40 > make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3328 bl31 41 42Compile U-Boot 43================== 44 45 > cd ../u-boot 46 > make CROSS_COMPILE=aarch64-linux-gnu- evb-rk3328_defconfig all 47 48Compile rkflashtool 49======================= 50 51 > cd ../rkflashtool 52 > make 53 54Package image for miniloader 55================================ 56 > cd .. 57 > cp arm-trusted-firmware/build/rk3328/release/bl31.bin rkbin/rk33 58 > ./rkbin/tools/trust_merger rkbin/tools/RK3328TRUST.ini 59 > ./rkbin/tools/loaderimage --pack --uboot u-boot/u-boot-dtb.bin uboot.img 60 > mkdir image 61 > mv trust.img ./image/ 62 > mv uboot.img ./image/rk3328evb-uboot.bin 63 64Flash image 65=============== 66Power on(or reset with RESET KEY) with MASKROM KEY preesed, and then: 67 68 > ./rkflashtool/rkflashloader rk3328evb 69 70You should be able to get U-Boot log message in console/UART2 now. 71