Lines Matching +full:- +full:6
1 <6>[ 0.000000] Initializing cgroup subsys cpu
2 <5>[ 0.000000] Linux version 3.0.8-g6656123 (android-build@vpbs1.mtv.corp.google.com) (gcc versi…
6 <6>[ 0.000000] Partition (from atag) bootloader -- Offset:0x00000000 Size:0x00200000
7 <6>[ 0.000000] Partition (from atag) misc -- Offset:0x004c0000 Size:0x00140000
8 <6>[ 0.000000] Partition (from atag) boot -- Offset:0x00600000 Size:0x00800000
9 <6>[ 0.000000] Partition (from atag) recovery -- Offset:0x00e00000 Size:0x00800000
10 <6>[ 0.000000] Partition (from atag) cache -- Offset:0x01600000 Size:0x1d580000
11 <6>[ 0.000000] Partition (from atag) radio -- Offset:0x1eb80000 Size:0x00d80000
12 <6>[ 0.000000] Partition (from atag) efs -- Offset:0x1f900000 Size:0x006c0000
16 <6>[ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
17 …s3c24xx_register_clock: new clock sclk_csis, id -1, dev (null) uses same enable bit as mout_csis…
18 …0000] s3c24xx_register_clock: new clock lcd, id -1, dev (null) uses same enable bit as sclk_fimd…
19 …00000] s3c24xx_register_clock: new clock mfc, id -1, dev (null) uses same enable bit as sclk_mfc…
24 <6>[ 0.000000] S5PV210: PLL settings, A=800000000, M=667000000, E=96000000 V=54000000
25 <6>[ 0.000000] S5PV210: ARMCLK=800000000, HCLKM=200000000, HCLKD=166750000
26 <6>[ 0.000000] HCLKP=133400000, PCLKM=100000000, PCLKD=83375000, PCLKP=66700000
27 <6>[ 0.000000] sclk_dmc: source is mout_mpll (1), rate is 166750000
28 <6>[ 0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
29 <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 133400000
30 <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
31 <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
32 <6>[ 0.000000] sclk: source is mout_mpll (6), rate is 66700000
33 <6>[ 0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
34 <6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
35 <6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
36 <6>[ 0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
37 <6>[ 0.000000] sclk_cam: source is xusbxti (1), rate is 24000000
38 <6>[ 0.000000] sclk_cam: source is ext_xtal (0), rate is 24000000
39 <6>[ 0.000000] sclk_fimd: source is mout_mpll (6), rate is 166750000
40 <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 51307692
41 <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
42 <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
43 <6>[ 0.000000] sclk_mmc: source is mout_mpll (6), rate is 47642857
44 <6>[ 0.000000] sclk_mfc: source is sclk_a2m (0), rate is 200000000
45 <6>[ 0.000000] sclk_fimg2d: source is sclk_a2m (0), rate is 200000000
46 <6>[ 0.000000] sclk: source is mout_mpll (1), rate is 66700000
47 <6>[ 0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
48 <6>[ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000
49 <6>[ 0.000000] sclk_spi: source is mout_epll (7), rate is 96000000
50 <6>[ 0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
51 <6>[ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
52 <6>[ 0.000000] sclk_mdnie: source is mout_mpll (6), rate is 166750000
53 <6>[ 0.000000] sclk_mdnie_pwm: source is ext_xtal (0), rate is 24000000
54 <6>[ 0.000000] s5p: 37748736 bytes system memory reserved for mfc at 0x32c00000, 0-bank base(0x3…
55 <6>[ 0.000000] s5p: 37748736 bytes system memory reserved for mfc at 0x4dc00000, 1-bank base(0x4…
56 <6>[ 0.000000] s5p: 6291456 bytes system memory reserved for fimc0 at 0x4d600000, 1-bank base(0x…
57 <6>[ 0.000000] s5p: 10137600 bytes system memory reserved for fimc1 at 0x4cc55000, 1-bank base(0…
58 <6>[ 0.000000] s5p: 6291456 bytes system memory reserved for fimc2 at 0x4c655000, 1-bank base(0x…
59 <6>[ 0.000000] s5p: 8388608 bytes system memory reserved for jpeg at 0x32400000, 0-bank base(0x3…
60 <6>[ 0.000000] s5p: 15360000 bytes system memory reserved for fimd at 0x4b7af000, 1-bank base(0x…
65 <7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
66 <7>[ 0.000000] pcpu-alloc: [0] 0
68 …0x0,0 androidboot.carrier=SPR gain_code=0 s3cfb.bootloaderfb=0x34a00000 mach-herring.lcd_type=0x00…
69 <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
70 <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
71 <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
72 <6>[ 0.000000] Memory: 36MB 183MB 127MB = 346MB total
75 <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
76 <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
77 <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
78 <5>[ 0.000000] vmalloc : 0xe8000000 - 0xfc000000 ( 320 MB)
79 <5>[ 0.000000] lowmem : 0xc0000000 - 0xe7f00000 ( 639 MB)
80 <5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
81 <5>[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
82 <5>[ 0.000000] .text : 0xc0032000 - 0xc065b000 (6308 kB)
83 <5>[ 0.000000] .data : 0xc065c000 - 0xc06a2d80 ( 284 kB)
84 <5>[ 0.000000] .bss : 0xc06a2da4 - 0xc07e1550 (1274 kB)
85 <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
86 <6>[ 0.000000] Preemptible hierarchical RCU implementation.
87 <6>[ 0.000000] NR_IRQS:339
88 <6>[ 0.000000] VIC @fc000000: id 0x00041192, vendor 0x41
89 <6>[ 0.000000] VIC @fc010000: id 0x00041192, vendor 0x41
90 <6>[ 0.000000] VIC @fc020000: id 0x00041192, vendor 0x41
91 <6>[ 0.000000] VIC @fc030000: id 0x00041192, vendor 0x41
92 <6>[ 0.000000] mult[140737]
93 <6>[ 0.000000] max_delta_ns[2937815369]
94 <6>[ 0.000000] min_delta_ns[30517]
95 <6>[ 0.000000] rate[32768]
96 <6>[ 0.000000] HZ[256]
97 <6>[ 0.000082] Calibrating delay loop... 795.12 BogoMIPS (lpj=1554432)
98 <6>[ 0.027254] pid_max: default: 32768 minimum: 301
99 <6>[ 0.027422] Mount-cache hash table entries: 512
100 <6>[ 0.027727] Initializing cgroup subsys debug
101 <6>[ 0.027740] Initializing cgroup subsys cpuacct
102 <6>[ 0.027758] Initializing cgroup subsys freezer
103 <6>[ 0.027788] CPU: Testing write buffer coherency: ok
104 <6>[ 0.029931] print_constraints: dummy:
105 <6>[ 0.030063] NET: Registered protocol family 16
107 <6>[ 0.036305] console [ttyFIQ0] enabled
108 <6>[ 0.036382] Registered FIQ tty driver e7856cc0
109 <6>[ 0.038338] ram_console: got buffer at 57f00000, size ff000
110 <6>[ 0.038517] ram_console: uncorrectable error in header
111 <6>[ 0.038527] ram_console: no valid data in buffer (sig = 0xfffffffc)
112 <6>[ 0.049175] console [ram-1] enabled
113 <6>[ 0.049403] S5PC110 Hardware version : EVT1
114 <6>[ 0.049555] HWREV is 0x0
122 <6>[ 0.051037] pmstats at 57fff000
123 <6>[ 0.052111] S5PV210: Initializing architecture
124 <6>[ 0.052442] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
125 <6>[ 0.052619] s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
126 <6>[ 0.052734] s3c24xx-pwm s3c24xx-pwm.2: tin at 66700000, tdiv at 66700000, tin=divclk, base 12
127 <6>[ 0.052910] s3c24xx-pwm s3c24xx-pwm.3: tin at 66700000, tdiv at 66700000, tin=divclk, base 16
128 <6>[ 0.053201] print_constraints: pd_audio_supply: 5000 mV normal
129 <6>[ 0.053444] print_constraints: pd_cam_supply: 5000 mV normal
130 <6>[ 0.053626] print_constraints: pd_tv_supply: 5000 mV normal
131 <6>[ 0.053859] print_constraints: pd_lcd_supply: 5000 mV normal
132 <6>[ 0.054029] print_constraints: pd_g3d_supply: 5000 mV normal
133 <6>[ 0.054263] print_constraints: pd_mfc_supply: 5000 mV normal
134 <6>[ 0.059056] bio: create slab <bio-0> at 0
136 <6>[ 0.060018] usbcore: registered new interface driver usbfs
137 <6>[ 0.060175] usbcore: registered new interface driver hub
138 <6>[ 0.060414] usbcore: registered new device driver usb
139 <6>[ 0.060760] i2c-gpio i2c-gpio.4: using pins 247 (SDA) and 246 (SCL)
140 <3>[ 0.061095] max8998 6-0066: No interrupt base specified, no interrupts
142 <6>[ 0.064303] print_constraints: VALIVE_1.2V: 1200 mV
143 <6>[ 0.064928] print_constraints: VUSB_1.1V: 1100 mV
144 <6>[ 0.065996] print_constraints: VADC_3.3V: 3300 mV
145 <6>[ 0.067164] print_constraints: VLCD_1.8V: 1800 mV
146 <6>[ 0.067790] print_constraints: VUSB_3.3V: 3300 mV
147 <6>[ 0.068928] print_constraints: VCC_2.8V_PDA: 2800 mV
148 <6>[ 0.069556] print_constraints: CAM_AF_3.0V: 3000 mV
149 <6>[ 0.070269] print_constraints: VGA_VDDIO_2.8V: 2800 mV
150 <6>[ 0.070899] print_constraints: VGA_DVDD_1.8V: 1800 mV
151 <6>[ 0.071524] print_constraints: CAM_ISP_HOST_2.8V: 2800 mV
152 <6>[ 0.072220] print_constraints: VGA_AVDD_2.8V: 2800 mV
153 <6>[ 0.073303] print_constraints: VCC_3.0V_LCD: 3000 mV
154 <6>[ 0.073807] print_constraints: VDD_ARM: 750 <--> 1500 mV at 1200 mV
155 <6>[ 0.074263] print_constraints: VDD_INT: 750 <--> 1500 mV at 1100 mV
156 <6>[ 0.075217] print_constraints: VCC_1.8V: 1800 mV
157 <6>[ 0.075654] print_constraints: CAM_ISP_CORE_1.2V: 1200 mV
158 <3>[ 0.075976] i2c i2c-6: Failed to register i2c client rtc_max8998 at 0x06 (-16)
159 <3>[ 0.076060] i2c i2c-6: Can't create device at 0x06
160 <6>[ 0.076146] i2c-gpio i2c-gpio.6: using pins 206 (SDA) and 209 (SCL)
161 <6>[ 0.076356] i2c-gpio i2c-gpio.7: using pins 201 (SDA) and 202 (SCL)
162 <6>[ 0.076577] i2c-gpio i2c-gpio.8: using pins 42 (SDA) and 43 (SCL)
163 <6>[ 0.076849] i2c-gpio i2c-gpio.9: using pins 245 (SDA) and 244 (SCL)
164 <6>[ 0.077063] i2c-gpio i2c-gpio.11: using pins 114 (SDA) and 98 (SCL)
165 <6>[ 0.077288] i2c-gpio i2c-gpio.12: using pins 173 (SDA) and 172 (SCL)
166 <6>[ 0.077497] i2c-gpio i2c-gpio.14: using pins 240 (SDA) and 239 (SCL)
167 <6>[ 0.077775] i2c-gpio i2c-gpio.10: using pins 197 (SDA) and 198 (SCL)
168 <6>[ 0.077943] i2c-gpio i2c-gpio.5: using pins 203 (SDA) and 204 (SCL)
169 <6>[ 0.078686] print_constraints: max8893_buck: 1200 mV
170 <6>[ 0.079236] print_constraints: max8893_ldo1: 2800 mV
171 <6>[ 0.079839] print_constraints: max8893_ldo2: 2800 mV
172 <6>[ 0.080386] print_constraints: max8893_ldo3: 3300 mV
173 <6>[ 0.080986] print_constraints: max8893_ldo4: 2900 mV
174 <6>[ 0.081513] print_constraints: max8893_ldo5: 2800 mV
175 <6>[ 0.081680] max8893 15-003e: Maxim 8893 regulator driver loaded
176 <6>[ 0.081769] i2c-gpio i2c-gpio.15: using pins 29 (SDA) and 31 (SCL)
177 <6>[ 0.082168] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
178 <6>[ 0.082442] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
179 <6>[ 0.082728] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
180 <6>[ 0.083019] Advanced Linux Sound Architecture Driver Version 1.0.24.
181 <6>[ 0.083521] Bluetooth: Core ver 2.16
182 <6>[ 0.083636] NET: Registered protocol family 31
183 <6>[ 0.083716] Bluetooth: HCI device and connection manager initialized
184 <6>[ 0.083862] Bluetooth: HCI socket layer initialized
185 <6>[ 0.083942] Bluetooth: L2CAP socket layer initialized
186 <6>[ 0.084094] Bluetooth: SCO socket layer initialized
187 <6>[ 0.084271] Switching to clocksource clock_source_systimer
188 <6>[ 0.085188] NET: Registered protocol family 2
189 <6>[ 0.085422] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
190 <6>[ 0.085884] Switched to NOHz mode on CPU #0
191 <6>[ 0.086226] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
192 <6>[ 0.086624] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
193 <6>[ 0.086850] TCP: Hash tables configured (established 16384 bind 16384)
194 <6>[ 0.086992] TCP reno registered
195 <6>[ 0.087074] UDP hash table entries: 256 (order: 0, 4096 bytes)
196 <6>[ 0.087227] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
197 <6>[ 0.087561] NET: Registered protocol family 1
198 <6>[ 0.087864] Trying to unpack rootfs image as initramfs...
199 <6>[ 0.098882] Freeing initrd memory: 160K
200 <6>[ 0.099108] PMU: registered new PMU device of type 0
202 <6>[ 0.256393] wake enabled for irq 165
203 <6>[ 0.256609] wake disabled for irq 165
204 <6>[ 0.256985] S5PV210 ADC driver, (c) 2010 Samsung Electronics
205 <6>[ 0.257394] Loaded driver for PL330 DMAC-0 s3c-pl330
206 <6>[ 0.257478] DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
207 <6>[ 0.257685] Loaded driver for PL330 DMAC-1 s3c-pl330
208 <6>[ 0.257766] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
209 <6>[ 0.257972] Loaded driver for PL330 DMAC-2 s3c-pl330
210 <6>[ 0.258053] DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
211 <6>[ 0.265485] ashmem: initialized
212 <6>[ 0.272892] ROMFS MTD (C) 2007 Red Hat, Inc.
214 <6>[ 0.273258] msgmni has been set to 669
215 <6>[ 0.274370] io scheduler noop registered
216 <6>[ 0.274517] io scheduler deadline registered
217 <6>[ 0.274644] io scheduler cfq registered (default)
218 <6>[ 0.276079] s3cfb s3cfb: [fb2] dma: 0x4bc14000, cpu: 0xe9000000, size: 0x00a41000
219 <6>[ 0.307818] FIMD src sclk = 166750000
220 <6>[ 0.307905] s3cfb s3cfb: pixclock adjusted from 39019 to 41979
221 <6>[ 0.308076] s3cfb s3cfb: registered successfully
222 <6>[ 0.308449] s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
223 <6>[ 0.315018] s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
224 <6>[ 0.322846] s5pv210-uart.3: s3c2410_serial3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
237 <6>[ 0.336607] brd: module loaded
238 <6>[ 0.338560] loop: module loaded
239 <6>[ 0.338750] pmem: 1 init
241 <4>[ 0.338913] android_pmem: probe of android_pmem.0 failed with error -1
242 <6>[ 0.339066] pmem_gpu1: 1 init
243 <4>[ 0.339256] android_pmem: probe of android_pmem.1 failed with error -1
244 <6>[ 0.339410] pmem_adsp: 1 init
245 <4>[ 0.339578] android_pmem: probe of android_pmem.2 failed with error -1
246 <6>[ 0.339721] Android kernel panic handler initialized (bind=kpanic)
247 <6>[ 0.346879] Loading pn544 driver
248 <6>[ 0.347033] pn544_probe : requesting IRQ 44
249 <6>[ 0.347256] sec_jack_probe : Registering jack driver
250 <6>[ 0.347558] wake enabled for irq 38
251 <6>[ 0.348935] wake enabled for irq 167
252 <6>[ 0.349453] fsa9480 7-0025: dev1: 0x4, dev2: 0x0
253 <4>[ 0.349565] i2c-core: driver [fsa9480] using legacy resume method
254 <6>[ 0.350949] [MODEM] bp_irq() PHONE_ACTIVE_PIN=0
255 <6>[ 0.351051] wake enabled for irq 47
256 <6>[ 0.351130] wake enabled for irq 43
257 <6>[ 0.351857] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
258 <6>[ 0.351938] OneNAND version = 0x0241
262 <6>[ 0.352323] Scanning device for bad blocks
263 <6>[ 2.048537] OneNAND eraseblock 2047 is an initial bad block
265 <5>[ 2.048772] 0x000000000000-0x000000200000 : "bootloader"
266 <5>[ 2.049504] 0x0000004c0000-0x000000600000 : "misc"
267 <5>[ 2.050194] 0x000000600000-0x000000e00000 : "boot"
268 <5>[ 2.050838] 0x000000e00000-0x000001600000 : "recovery"
269 <5>[ 2.051399] 0x000001600000-0x00001eb80000 : "cache"
270 <5>[ 2.052966] 0x00001eb80000-0x00001f900000 : "radio"
271 <5>[ 2.053596] 0x00001f900000-0x00001ffc0000 : "efs"
272 <6>[ 2.147053] tl2796: c0, b-93b4111a, got v 1880054, factory wants 1925000
273 <6>[ 2.147141] tl2796: c1, b-97bd18b9, got v 1947186, factory wants 1939000
274 <6>[ 2.147288] tl2796: c2, b-7f02c214, got v 1717805, factory wants 1568000
275 <6>[ 2.291579] tl2796_probe successfully proved
276 <6>[ 2.291780] PPP generic driver version 2.4.2
277 <6>[ 2.291964] PPP Deflate Compression module registered
278 <6>[ 2.292107] PPP BSD Compression module registered
279 <6>[ 2.292752] PPP MPPE Compression module registered
280 <6>[ 2.292839] NET: Registered protocol family 24
281 <6>[ 2.294265] tun: Universal TUN/TAP device driver, 1.6
282 <6>[ 2.294348] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
283 <6>[ 3.115969] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
284 <6>[ 3.115978] s3c-udc : version 15 March 2009 (DMA Mode)
285 <6>[ 3.117121] android_usb gadget: Mass Storage Function, version: 2009/09/11
286 <6>[ 3.117269] android_usb gadget: Number of LUNs=1
287 <6>[ 3.117351] lun0: LUN: removable file: (no medium)
288 <6>[ 3.117622] android_usb gadget: android_usb ready
290 <6>[ 3.132588] usbcore: registered new interface driver xpad
291 <6>[ 3.132779] usbcore: registered new interface driver usb_acecad
292 <6>[ 3.132860] acecad: v3.2:USB Acecad Flair tablet driver
293 <6>[ 3.133040] usbcore: registered new interface driver aiptek
294 <6>[ 3.133120] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
295 <6>[ 3.133264] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
296 <6>[ 3.133445] usbcore: registered new interface driver gtco
298 <6>[ 3.133706] usbcore: registered new interface driver hanwang
299 <6>[ 3.133894] usbcore: registered new interface driver kbtab
300 <6>[ 3.134037] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
301 <6>[ 3.134155] usbcore: registered new interface driver wacom
302 <6>[ 3.134235] wacom: v1.52:USB Wacom tablet driver
303 <6>[ 3.134517] input: mxt224_ts_input as /devices/virtual/input/input0
304 <6>[ 3.175205] Atmel MXT224 2-004a: family = 0x80, variant = 0x1, version = 0x16, build = 171
305 <6>[ 3.252886] input: gyro as /devices/virtual/input/input1
306 <6>[ 3.253298] wake enabled for irq 166
307 <6>[ 3.253401] wake enabled for irq 169
308 <6>[ 3.253500] wake enabled for irq 170
309 <6>[ 3.253643] GPIO Input Driver: Start gpio inputs for herring-keypad in interrupt mode
310 <6>[ 3.253872] input: herring-keypad as /devices/virtual/input/input2
311 <6>[ 3.254448] input: proximity as /devices/virtual/input/input3
312 <6>[ 3.254832] input: lightsensor-level as /devices/virtual/input/input4
313 <6>[ 3.255263] max8998-rtc max8998-rtc: RTC CHIP NAME: max8998-rtc
315 <6>[ 3.256286] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
316 <6>[ 3.256427] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
317 <6>[ 3.256579] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
318 <6>[ 3.256664] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
319 <6>[ 3.257039] using rtc device, s3c, for alarms
320 <6>[ 3.257142] s3c-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
321 <6>[ 3.257404] i2c /dev entries driver
322 <6>[ 3.258492] lirc_dev: IR Remote Control driver registered, major 250
323 <6>[ 3.258639] IR NEC protocol handler initialized
324 <6>[ 3.258717] IR RC5(x) protocol handler initialized
325 <6>[ 3.258796] IR RC6 protocol handler initialized
326 <6>[ 3.258937] IR JVC protocol handler initialized
327 <6>[ 3.259015] IR Sony protocol handler initialized
328 <6>[ 3.259156] IR RC5 (streamzap) protocol handler initialized
329 <6>[ 3.259235] IR LIRC bridge handler initialized
330 <6>[ 3.259375] Linux video capture interface: v2.00
331 <6>[ 3.259559] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
332 <6>[ 3.259566]
333 <6>[ 3.262823] S3C JPEG Driver, (c) 2007 Samsung Electronics
334 <6>[ 3.262910] JPEG driver for S5PV210
335 <6>[ 3.264948] max17040 9-0036: MAX17040 Fuel-Gauge Ver 02
336 <6>[ 3.265905] device-mapper: uevent: version 1.0.3
337 <6>[ 3.266243] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
338 <6>[ 3.266415] Bluetooth: HCI UART driver ver 2.2
339 <6>[ 3.266497] Bluetooth: HCI H4 protocol initialized
340 <6>[ 3.266699] cpuidle: using governor ladder
341 <6>[ 3.266837] cpuidle: using governor menu
342 <6>[ 3.267011] sdhci: Secure Digital Host Controller Interface driver
343 <6>[ 3.267090] sdhci: Copyright(c) Pierre Ossman
344 <6>[ 3.267316] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
345 <6>[ 3.267413] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (51307692 Hz)
346 <4>[ 3.267591] ------------[ cut here ]------------
348 <4>[ 3.267830] autorequest GPIO-195
383 <4>[ 3.275217] ---[ end trace def72bfc088655f8 ]---
384 <6>[ 3.275386] mmc0: no vmmc regulator found
385 <6>[ 3.275632] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
386 <6>[ 3.275844] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
387 <6>[ 3.276026] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
388 <6>[ 3.276146] mmc1: no vmmc regulator found
389 <6>[ 3.276378] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
390 <6>[ 3.276504] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
391 <6>[ 3.276661] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
392 <6>[ 3.276774] mmc2: no vmmc regulator found
393 <6>[ 3.276997] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
394 <6>[ 3.279049] usbcore: registered new interface driver usbhid
395 <6>[ 3.279195] usbhid: USB HID core driver
396 <6>[ 3.279552] logger: created 256K log 'log_main'
397 <6>[ 3.279773] logger: created 256K log 'log_events'
398 <6>[ 3.279948] logger: created 256K log 'log_radio'
399 <6>[ 3.280085] logger: created 256K log 'log_system'
400 <6>[ 3.281163] WM8994 Audio Codec 0.1
401 <6>[ 3.296362] s3c_idma_preallocate_buffer: VA-e8080000 PA-C0000000 163840bytes
402 <6>[ 3.296789] asoc: WM8994 PAIFRX <-> samsung-i2s.0 mapping ok
403 <6>[ 3.297182] ALSA device list:
404 <6>[ 3.297262] #0: smdkc110
405 <6>[ 3.297403] oprofile: hardware counters not available
406 <6>[ 3.297480] oprofile: using timer interrupt.
407 <6>[ 3.297856] GACT probability NOT on
408 <6>[ 3.297943] Mirror/redirect action on
409 <6>[ 3.298023] u32 classifier
410 <6>[ 3.298098] Actions configured
411 <6>[ 3.298239] Netfilter messages via NETLINK v0.30.
412 <6>[ 3.298369] nf_conntrack version 0.5.0 (5355 buckets, 21420 max)
413 <6>[ 3.299275] ctnetlink v0.93: registering with nfnetlink.
414 <6>[ 3.299434] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
415 <6>[ 3.299578] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
416 <6>[ 3.299851] xt_time: kernel timezone is -0000
417 <6>[ 3.301520] ip_tables: (C) 2000-2006 Netfilter Core Team
418 <6>[ 3.301830] arp_tables: (C) 2002 David S. Miller
419 <6>[ 3.302042] TCP cubic registered
420 <6>[ 3.302977] NET: Registered protocol family 10
421 <6>[ 3.311150] Mobile IPv6
422 <6>[ 3.311257] ip6_tables: (C) 2000-2006 Netfilter Core Team
423 <6>[ 3.311671] IPv6 over IPv4 tunneling driver
424 <6>[ 3.316332] NET: Registered protocol family 17
425 <6>[ 3.317550] NET: Registered protocol family 15
426 <6>[ 3.317732] Bluetooth: RFCOMM TTY layer initialized
427 <6>[ 3.319884] Bluetooth: RFCOMM socket layer initialized
428 <6>[ 3.320028] Bluetooth: RFCOMM ver 1.11
429 <6>[ 3.320108] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
430 <6>[ 3.320251] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
431 <6>[ 3.320443] NET: Registered protocol family 35
432 <6>[ 3.320727] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
433 <6>[ 3.320888] ThumbEE CPU extension supported.
434 <6>[ 3.321284] s5pv210_cpufreq_init: S5PV210 cpu-freq driver
435 <6>[ 3.326750] regulator_init_complete: pd_mfc_supply: disabling
436 <6>[ 3.326903] regulator_init_complete: pd_tv_supply: disabling
437 <6>[ 3.326986] regulator_init_complete: pd_cam_supply: disabling
438 <6>[ 3.382337] cypress_touchkey_driver 10-0020: cypress_touchkey_probe: hardware rev1 = 0xa, rev…
439 <6>[ 3.384057] input: cypress-touchkey as /devices/virtual/input/input5
440 <6>[ 3.387684] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
441 <6>[ 3.388860] s3c-rtc s3c2410-rtc: setting system clock to 2017-09-12 22:51:21 UTC (1505256681)
442 <6>[ 3.393219] FIMC0 registered successfully
443 <6>[ 3.396685] FIMC1 registered successfully
444 <6>[ 3.399860] FIMC2 registered successfully
445 <6>[ 3.401390] max8998_charger_probe : MAX8998 Charger Driver Loading
446 <6>[ 3.407445] max8998_charger_probe : pmic interrupt registered
447 <6>[ 3.413022] wake enabled for irq 39
448 <6>[ 3.415340] Freeing init memory: 168K
450 <6>[ 3.479198] keychord: using input dev herring-keypad for fevent
451 <6>[ 3.495102] yaffs: dev is 32505860 name is "mtdblock4" rw
452 <6>[ 3.495225] yaffs: passed flags ""
455 <6>[ 3.505685] yaffs: dev is 32505862 name is "mtdblock6" rw
456 <6>[ 3.505838] yaffs: passed flags ""
459 <6>[ 3.617878] mmc0: new high speed MMC card at address 0001
460 <6>[ 3.620641] mmcblk0: mmc0:0001 SEM16G 14.8 GiB
461 <6>[ 3.622287] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00 MiB
462 <6>[ 3.623403] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00 MiB
463 <6>[ 3.644810] mmcblk0: p1 p2 p3
464 <6>[ 3.662875] mmcblk0boot1: unknown partition table
465 <6>[ 3.680717] mmcblk0boot0: unknown partition table
466 <6>[ 3.688224] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
467 <6>[ 3.712638] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: nomblk_io_s…
469 <6>[ 3.914933] adb_bind_config
470 <6>[ 3.916490] warning: `adbd' uses 32-bit capabilities (legacy support in use)
471 <6>[ 3.918432] adb_open
472 <6>[ 3.922109] android_work: did not send uevent (0 0 (null))
486 <6>[ 4.085416] android_work: sent uevent USB_STATE=CONNECTED
527 <6>[ 4.156161] android_usb gadget: high speed config #1: android
528 <6>[ 4.156363] android_work: sent uevent USB_STATE=CONFIGURED
569 <6>[ 4.251049] PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [529, drivers/gpu/pv…
627 <6>[ 4.329424] [MODEM] modem_reset()
634 <6>[ 4.529738] [MODEM] bp_irq() PHONE_ACTIVE_PIN=1
635 <6>[ 4.990939] modemctl_ioctl() 0
636 <6>[ 5.329775] s3cfb s3cfb: [fb0] dma: 0x4b7af000, cpu: 0xeb800000, size: 0x00465000
637 <6>[ 5.391585] [MODEM] modem_start() normal
638 <6>[ 5.391875] [MODEM] modem_start() DONE
639 <6>[ 5.392023] modemctl_ioctl() 0
640 <6>[ 14.956155] wake enabled for irq 34
641 <6>[ 14.964007] input: compass as /devices/virtual/input/input6
642 <6>[ 15.027839] wake disabled for irq 34
643 <6>[ 20.604561] request_suspend_state: wakeup (3->0) at 20594375241 (2017-09-12 22:51:38.71491400…
644 <6>[ 20.881401] wake enabled for irq 165
645 <6>[ 21.250662] acc_open
646 <6>[ 21.250803] acc_release
647 <6>[ 23.922298] pn544_dev_ioctl power on
648 <6>[ 23.947776] pn544_dev_ioctl power off
649 <6>[ 24.014196] pn544_dev_ioctl power on
650 <6>[ 25.873966] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling