/* * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef EMMC_REGISTERS_H #define EMMC_REGISTERS_H /* MMC channel select */ #define MMC_CH0 (0U) /* SDHI2/MMC0 */ #define MMC_CH1 (1U) /* SDHI3/MMC1 */ #if (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RZ_G2M) #define USE_MMC_CH (MMC_CH1) /* R-Car E3 or RZ/G2M */ #else /* RCAR_LSI == RCAR_E3 || RCAR_LSI == RZ_G2M */ #define USE_MMC_CH (MMC_CH0) /* R-Car H3/M3/M3N */ #endif /* RCAR_LSI == RCAR_E3 || RCAR_LSI == RZ_G2M */ #define BIT0 (0x00000001U) #define BIT1 (0x00000002U) #define BIT2 (0x00000004U) #define BIT3 (0x00000008U) #define BIT4 (0x00000010U) #define BIT5 (0x00000020U) #define BIT6 (0x00000040U) #define BIT7 (0x00000080U) #define BIT8 (0x00000100U) #define BIT9 (0x00000200U) #define BIT10 (0x00000400U) #define BIT11 (0x00000800U) #define BIT12 (0x00001000U) #define BIT13 (0x00002000U) #define BIT14 (0x00004000U) #define BIT15 (0x00008000U) #define BIT16 (0x00010000U) #define BIT17 (0x00020000U) #define BIT18 (0x00040000U) #define BIT19 (0x00080000U) #define BIT20 (0x00100000U) #define BIT21 (0x00200000U) #define BIT22 (0x00400000U) #define BIT23 (0x00800000U) #define BIT24 (0x01000000U) #define BIT25 (0x02000000U) #define BIT26 (0x04000000U) #define BIT27 (0x08000000U) #define BIT28 (0x10000000U) #define BIT29 (0x20000000U) #define BIT30 (0x40000000U) #define BIT31 (0x80000000U) /* Clock Pulse Generator (CPG) registers */ #define CPG_BASE (0xE6150000U) /* Module stop status register 3 */ #define CPG_MSTPSR3 (CPG_BASE + 0x0048U) /* System module stop control register 3 */ #define CPG_SMSTPCR3 (CPG_BASE + 0x013CU) /* SDHI2 clock frequency control register */ #define CPG_SD2CKCR (CPG_BASE + 0x0268U) /* SDHI3 clock frequency control register */ #define CPG_SD3CKCR (CPG_BASE + 0x026CU) /* CPG Write Protect Register */ #define CPG_CPGWPR (CPG_BASE + 0x0900U) #if USE_MMC_CH == MMC_CH0 #define CPG_SDxCKCR (CPG_SD2CKCR) /* SDHI2/MMC0 */ #else /* USE_MMC_CH == MMC_CH0 */ #define CPG_SDxCKCR (CPG_SD3CKCR) /* SDHI3/MMC1 */ #endif /* USE_MMC_CH == MMC_CH0 */ /* Boot Status register */ #define MFISBTSTSR (0xE6260604U) #define MFISBTSTSR_BOOT_PARTITION (0x00000010U) /* eMMC registers */ #define MMC0_SD_BASE (0xEE140000U) #define MMC1_SD_BASE (0xEE160000U) #if USE_MMC_CH == MMC_CH0 #define MMC_SD_BASE (MMC0_SD_BASE) #else /* USE_MMC_CH == MMC_CH0 */ #define MMC_SD_BASE (MMC1_SD_BASE) #endif /* USE_MMC_CH == MMC_CH0 */ #define SD_CMD (MMC_SD_BASE + 0x0000U) #define SD_PORTSEL (MMC_SD_BASE + 0x0008U) #define SD_ARG (MMC_SD_BASE + 0x0010U) #define SD_ARG1 (MMC_SD_BASE + 0x0018U) #define SD_STOP (MMC_SD_BASE + 0x0020U) #define SD_SECCNT (MMC_SD_BASE + 0x0028U) #define SD_RSP10 (MMC_SD_BASE + 0x0030U) #define SD_RSP1 (MMC_SD_BASE + 0x0038U) #define SD_RSP32 (MMC_SD_BASE + 0x0040U) #define SD_RSP3 (MMC_SD_BASE + 0x0048U) #define SD_RSP54 (MMC_SD_BASE + 0x0050U) #define SD_RSP5 (MMC_SD_BASE + 0x0058U) #define SD_RSP76 (MMC_SD_BASE + 0x0060U) #define SD_RSP7 (MMC_SD_BASE + 0x0068U) #define SD_INFO1 (MMC_SD_BASE + 0x0070U) #define SD_INFO2 (MMC_SD_BASE + 0x0078U) #define SD_INFO1_MASK (MMC_SD_BASE + 0x0080U) #define SD_INFO2_MASK (MMC_SD_BASE + 0x0088U) #define SD_CLK_CTRL (MMC_SD_BASE + 0x0090U) #define SD_SIZE (MMC_SD_BASE + 0x0098U) #define SD_OPTION (MMC_SD_BASE + 0x00A0U) #define SD_ERR_STS1 (MMC_SD_BASE + 0x00B0U) #define SD_ERR_STS2 (MMC_SD_BASE + 0x00B8U) #define SD_BUF0 (MMC_SD_BASE + 0x00C0U) #define SDIO_MODE (MMC_SD_BASE + 0x00D0U) #define SDIO_INFO1 (MMC_SD_BASE + 0x00D8U) #define SDIO_INFO1_MASK (MMC_SD_BASE + 0x00E0U) #define CC_EXT_MODE (MMC_SD_BASE + 0x0360U) #define SOFT_RST (MMC_SD_BASE + 0x0380U) #define VERSION (MMC_SD_BASE + 0x0388U) #define HOST_MODE (MMC_SD_BASE + 0x0390U) #define DM_CM_DTRAN_MODE (MMC_SD_BASE + 0x0820U) #define DM_CM_DTRAN_CTRL (MMC_SD_BASE + 0x0828U) #define DM_CM_RST (MMC_SD_BASE + 0x0830U) #define DM_CM_INFO1 (MMC_SD_BASE + 0x0840U) #define DM_CM_INFO1_MASK (MMC_SD_BASE + 0x0848U) #define DM_CM_INFO2 (MMC_SD_BASE + 0x0850U) #define DM_CM_INFO2_MASK (MMC_SD_BASE + 0x0858U) #define DM_DTRAN_ADDR (MMC_SD_BASE + 0x0880U) /* SD_INFO1 Registers */ #define SD_INFO1_HPIRES 0x00010000UL /* Response Reception Completion */ #define SD_INFO1_INFO10 0x00000400UL /* Indicates the SDDAT3 state */ #define SD_INFO1_INFO9 0x00000200UL /* SDDAT3 Card Insertion */ #define SD_INFO1_INFO8 0x00000100UL /* SDDAT3 Card Removal */ #define SD_INFO1_INFO7 0x00000080UL /* Write Protect */ #define SD_INFO1_INFO5 0x00000020UL /* Indicates the ISDCD state */ #define SD_INFO1_INFO4 0x00000010UL /* ISDCD Card Insertion */ #define SD_INFO1_INFO3 0x00000008UL /* ISDCD Card Removal */ #define SD_INFO1_INFO2 0x00000004UL /* Access end */ #define SD_INFO1_INFO0 0x00000001UL /* Response end */ /* SD_INFO2 Registers */ #define SD_INFO2_ILA 0x00008000UL /* Illegal Access Error */ #define SD_INFO2_CBSY 0x00004000UL /* Command Type Register Busy */ #define SD_INFO2_SCLKDIVEN 0x00002000UL #define SD_INFO2_BWE 0x00000200UL /* SD_BUF Write Enable */ #define SD_INFO2_BRE 0x00000100UL /* SD_BUF Read Enable */ #define SD_INFO2_DAT0 0x00000080UL /* SDDAT0 */ #define SD_INFO2_ERR6 0x00000040UL /* Response Timeout */ #define SD_INFO2_ERR5 0x00000020UL /* SD_BUF Illegal Read Access */ #define SD_INFO2_ERR4 0x00000010UL /* SD_BUF Illegal Write Access */ #define SD_INFO2_ERR3 0x00000008UL /* Data Timeout */ #define SD_INFO2_ERR2 0x00000004UL /* END Error */ #define SD_INFO2_ERR1 0x00000002UL /* CRC Error */ #define SD_INFO2_ERR0 0x00000001UL /* CMD Error */ #define SD_INFO2_ALL_ERR 0x0000807FUL #define SD_INFO2_CLEAR 0x00000800UL /* BIT11 write value should always be 1. HWM_0003 */ /* SOFT_RST */ #define SOFT_RST_SDRST 0x00000001UL /* SD_CLK_CTRL */ #define SD_CLK_CTRL_SDCLKOFFEN 0x00000200UL #define SD_CLK_CTRL_SCLKEN 0x00000100UL #define SD_CLK_CTRL_CLKDIV_MASK 0x000000FFUL #define SD_CLOCK_ENABLE 0x00000100UL #define SD_CLOCK_DISABLE 0x00000000UL #define SD_CLK_WRITE_MASK 0x000003FFUL #define SD_CLK_CLKDIV_CLEAR_MASK 0xFFFFFF0FUL /* SD_OPTION */ #define SD_OPTION_TIMEOUT_CNT_MASK 0x000000F0UL /* * MMC Clock Frequency * 200MHz * 1/x = output clock */ #define MMC_CLK_OFF 0UL /* Clock output is disabled */ #define MMC_400KHZ 512UL /* 200MHz * 1/512 = 390 KHz */ #define MMC_20MHZ 16UL /* 200MHz * 1/16 = 12.5 MHz Normal speed mode */ #define MMC_26MHZ 8UL /* 200MHz * 1/8 = 25 MHz HS mode 26Mhz */ #define MMC_52MHZ 4UL /* 200MHz * 1/4 = 50 MHz HS mode 52Mhz */ #define MMC_100MHZ 2UL /* 200MHz * 1/2 = 100 MHz */ #define MMC_200MHZ 1UL /* 200MHz * 1/1 = 200 MHz */ #define MMC_FREQ_52MHZ 52000000UL #define MMC_FREQ_26MHZ 26000000UL #define MMC_FREQ_20MHZ 20000000UL /* MMC Clock DIV */ #define MMC_SD_CLK_START 0x00000100UL /* CLOCK On */ #define MMC_SD_CLK_STOP (~0x00000100UL) /* CLOCK stop */ #define MMC_SD_CLK_DIV1 0x000000FFUL /* 1/1 */ #define MMC_SD_CLK_DIV2 0x00000000UL /* 1/2 */ #define MMC_SD_CLK_DIV4 0x00000001UL /* 1/4 */ #define MMC_SD_CLK_DIV8 0x00000002UL /* 1/8 */ #define MMC_SD_CLK_DIV16 0x00000004UL /* 1/16 */ #define MMC_SD_CLK_DIV32 0x00000008UL /* 1/32 */ #define MMC_SD_CLK_DIV64 0x00000010UL /* 1/64 */ #define MMC_SD_CLK_DIV128 0x00000020UL /* 1/128 */ #define MMC_SD_CLK_DIV256 0x00000040UL /* 1/256 */ #define MMC_SD_CLK_DIV512 0x00000080UL /* 1/512 */ /* DM_CM_DTRAN_MODE */ #define DM_CM_DTRAN_MODE_CH0 0x00000000UL /* CH0(downstream) */ #define DM_CM_DTRAN_MODE_CH1 0x00010000UL /* CH1(upstream) */ #define DM_CM_DTRAN_MODE_BIT_WIDTH 0x00000030UL /* CC_EXT_MODE */ #define CC_EXT_MODE_DMASDRW_ENABLE 0x00000002UL /* SD_BUF Read/Write DMA Transfer */ #define CC_EXT_MODE_CLEAR 0x00001010UL /* BIT 12 & 4 always 1. */ /* DM_CM_INFO_MASK */ #define DM_CM_INFO_MASK_CLEAR 0xFFFCFFFEUL #define DM_CM_INFO_CH0_ENABLE 0x00010001UL #define DM_CM_INFO_CH1_ENABLE 0x00020001UL /* DM_DTRAN_ADDR */ #define DM_DTRAN_ADDR_WRITE_MASK 0xFFFFFFF8UL /* DM_CM_DTRAN_CTRL */ #define DM_CM_DTRAN_CTRL_START 0x00000001UL /* SYSC Registers */ #if USE_MMC_CH == MMC_CH0 #define CPG_MSTP_MMC (BIT12) /* SDHI2/MMC0 */ #else /* USE_MMC_CH == MMC_CH0 */ #define CPG_MSTP_MMC (BIT11) /* SDHI3/MMC1 */ #endif /* USE_MMC_CH == MMC_CH0 */ #endif /* EMMC_REGISTERS_H */