// Copyright 2017 The Chromium OS Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

use libc::{
    c_int, pthread_kill, pthread_sigmask, pthread_t, sigaction, sigaddset, sigemptyset, siginfo_t,
    sigismember, sigpending, sigset_t, sigtimedwait, sigwait, timespec, waitpid, EAGAIN, EINTR,
    EINVAL, SA_RESTART, SIG_BLOCK, SIG_DFL, SIG_UNBLOCK, WNOHANG,
};

use std::cmp::Ordering;
use std::convert::TryFrom;
use std::fmt::{self, Display};
use std::io;
use std::mem;
use std::os::unix::thread::JoinHandleExt;
use std::process::Child;
use std::ptr::{null, null_mut};
use std::result;
use std::thread::JoinHandle;
use std::time::{Duration, Instant};

use crate::{duration_to_timespec, errno, errno_result, getsid, Pid, Result};
use std::ops::{Deref, DerefMut};

const POLL_RATE: Duration = Duration::from_millis(50);
const DEFAULT_KILL_TIMEOUT: Duration = Duration::from_secs(5);

#[derive(Debug)]
pub enum Error {
    /// Couldn't create a sigset.
    CreateSigset(errno::Error),
    /// The wrapped signal has already been blocked.
    SignalAlreadyBlocked(c_int),
    /// Failed to check if the requested signal is in the blocked set already.
    CompareBlockedSignals(errno::Error),
    /// The signal could not be blocked.
    BlockSignal(errno::Error),
    /// The signal mask could not be retrieved.
    RetrieveSignalMask(i32),
    /// The signal could not be unblocked.
    UnblockSignal(errno::Error),
    /// Failed to wait for given signal.
    ClearWaitPending(errno::Error),
    /// Failed to get pending signals.
    ClearGetPending(errno::Error),
    /// Failed to check if given signal is in the set of pending signals.
    ClearCheckPending(errno::Error),
    /// Failed to send signal to pid.
    Kill(errno::Error),
    /// Failed to get session id.
    GetSid(errno::Error),
    /// Failed to wait for signal.
    WaitForSignal(errno::Error),
    /// Failed to wait for pid.
    WaitPid(errno::Error),
    /// Timeout reached.
    TimedOut,
    /// Failed to convert signum to Signal.
    UnrecognizedSignum(i32),
    /// Converted signum greater than SIGRTMAX.
    RtSignumGreaterThanMax(Signal),
}

impl Display for Error {
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        use self::Error::*;

        match self {
            CreateSigset(e) => write!(f, "couldn't create a sigset: {}", e),
            SignalAlreadyBlocked(num) => write!(f, "signal {} already blocked", num),
            CompareBlockedSignals(e) => write!(
                f,
                "failed to check whether requested signal is in the blocked set: {}",
                e,
            ),
            BlockSignal(e) => write!(f, "signal could not be blocked: {}", e),
            RetrieveSignalMask(errno) => write!(
                f,
                "failed to retrieve signal mask: {}",
                io::Error::from_raw_os_error(*errno),
            ),
            UnblockSignal(e) => write!(f, "signal could not be unblocked: {}", e),
            ClearWaitPending(e) => write!(f, "failed to wait for given signal: {}", e),
            ClearGetPending(e) => write!(f, "failed to get pending signals: {}", e),
            ClearCheckPending(e) => write!(
                f,
                "failed to check whether given signal is in the pending set: {}",
                e,
            ),
            Kill(e) => write!(f, "failed to send signal: {}", e),
            GetSid(e) => write!(f, "failed to get session id: {}", e),
            WaitForSignal(e) => write!(f, "failed to wait for signal: {}", e),
            WaitPid(e) => write!(f, "failed to wait for process: {}", e),
            TimedOut => write!(f, "timeout reached."),
            UnrecognizedSignum(signum) => write!(f, "unrecoginized signal number: {}", signum),
            RtSignumGreaterThanMax(signal) => {
                write!(f, "got RT signal greater than max: {:?}", signal)
            }
        }
    }
}

#[derive(Clone, Copy, Debug, Eq, PartialEq)]
#[repr(i32)]
pub enum Signal {
    Abort = libc::SIGABRT,
    Alarm = libc::SIGALRM,
    Bus = libc::SIGBUS,
    Child = libc::SIGCHLD,
    Continue = libc::SIGCONT,
    ExceededFileSize = libc::SIGXFSZ,
    FloatingPointException = libc::SIGFPE,
    HangUp = libc::SIGHUP,
    IllegalInstruction = libc::SIGILL,
    Interrupt = libc::SIGINT,
    Io = libc::SIGIO,
    Kill = libc::SIGKILL,
    Pipe = libc::SIGPIPE,
    Power = libc::SIGPWR,
    Profile = libc::SIGPROF,
    Quit = libc::SIGQUIT,
    SegmentationViolation = libc::SIGSEGV,
    StackFault = libc::SIGSTKFLT,
    Stop = libc::SIGSTOP,
    Sys = libc::SIGSYS,
    Trap = libc::SIGTRAP,
    Terminate = libc::SIGTERM,
    TtyIn = libc::SIGTTIN,
    TtyOut = libc::SIGTTOU,
    TtyStop = libc::SIGTSTP,
    Urgent = libc::SIGURG,
    User1 = libc::SIGUSR1,
    User2 = libc::SIGUSR2,
    VtAlarm = libc::SIGVTALRM,
    Winch = libc::SIGWINCH,
    Xcpu = libc::SIGXCPU,
    // Rt signal numbers are be adjusted in the conversion to integer.
    Rt0 = libc::SIGSYS + 1,
    Rt1,
    Rt2,
    Rt3,
    Rt4,
    Rt5,
    Rt6,
    Rt7,
    // Only 8 are guaranteed by POSIX, Linux has 32, but only 29 or 30 are usable.
    Rt8,
    Rt9,
    Rt10,
    Rt11,
    Rt12,
    Rt13,
    Rt14,
    Rt15,
    Rt16,
    Rt17,
    Rt18,
    Rt19,
    Rt20,
    Rt21,
    Rt22,
    Rt23,
    Rt24,
    Rt25,
    Rt26,
    Rt27,
    Rt28,
    Rt29,
    Rt30,
    Rt31,
}

impl From<Signal> for c_int {
    fn from(signal: Signal) -> c_int {
        let num = signal as libc::c_int;
        if num >= Signal::Rt0 as libc::c_int {
            return num - (Signal::Rt0 as libc::c_int) + SIGRTMIN();
        }
        num
    }
}

impl TryFrom<c_int> for Signal {
    type Error = Error;

    fn try_from(value: c_int) -> result::Result<Self, Self::Error> {
        use Signal::*;

        Ok(match value {
            libc::SIGABRT => Abort,
            libc::SIGALRM => Alarm,
            libc::SIGBUS => Bus,
            libc::SIGCHLD => Child,
            libc::SIGCONT => Continue,
            libc::SIGXFSZ => ExceededFileSize,
            libc::SIGFPE => FloatingPointException,
            libc::SIGHUP => HangUp,
            libc::SIGILL => IllegalInstruction,
            libc::SIGINT => Interrupt,
            libc::SIGIO => Io,
            libc::SIGKILL => Kill,
            libc::SIGPIPE => Pipe,
            libc::SIGPWR => Power,
            libc::SIGPROF => Profile,
            libc::SIGQUIT => Quit,
            libc::SIGSEGV => SegmentationViolation,
            libc::SIGSTKFLT => StackFault,
            libc::SIGSTOP => Stop,
            libc::SIGSYS => Sys,
            libc::SIGTRAP => Trap,
            libc::SIGTERM => Terminate,
            libc::SIGTTIN => TtyIn,
            libc::SIGTTOU => TtyOut,
            libc::SIGTSTP => TtyStop,
            libc::SIGURG => Urgent,
            libc::SIGUSR1 => User1,
            libc::SIGUSR2 => User2,
            libc::SIGVTALRM => VtAlarm,
            libc::SIGWINCH => Winch,
            libc::SIGXCPU => Xcpu,
            _ => {
                if value < SIGRTMIN() {
                    return Err(Error::UnrecognizedSignum(value));
                }
                let signal = match value - SIGRTMIN() {
                    0 => Rt0,
                    1 => Rt1,
                    2 => Rt2,
                    3 => Rt3,
                    4 => Rt4,
                    5 => Rt5,
                    6 => Rt6,
                    7 => Rt7,
                    8 => Rt8,
                    9 => Rt9,
                    10 => Rt10,
                    11 => Rt11,
                    12 => Rt12,
                    13 => Rt13,
                    14 => Rt14,
                    15 => Rt15,
                    16 => Rt16,
                    17 => Rt17,
                    18 => Rt18,
                    19 => Rt19,
                    20 => Rt20,
                    21 => Rt21,
                    22 => Rt22,
                    23 => Rt23,
                    24 => Rt24,
                    25 => Rt25,
                    26 => Rt26,
                    27 => Rt27,
                    28 => Rt28,
                    29 => Rt29,
                    30 => Rt30,
                    31 => Rt31,
                    _ => {
                        return Err(Error::UnrecognizedSignum(value));
                    }
                };
                if value > SIGRTMAX() {
                    return Err(Error::RtSignumGreaterThanMax(signal));
                }
                signal
            }
        })
    }
}

pub type SignalResult<T> = result::Result<T, Error>;

#[link(name = "c")]
extern "C" {
    fn __libc_current_sigrtmin() -> c_int;
    fn __libc_current_sigrtmax() -> c_int;
}

/// Returns the minimum (inclusive) real-time signal number.
#[allow(non_snake_case)]
pub fn SIGRTMIN() -> c_int {
    unsafe { __libc_current_sigrtmin() }
}

/// Returns the maximum (inclusive) real-time signal number.
#[allow(non_snake_case)]
pub fn SIGRTMAX() -> c_int {
    unsafe { __libc_current_sigrtmax() }
}

fn valid_rt_signal_num(num: c_int) -> bool {
    num >= SIGRTMIN() && num <= SIGRTMAX()
}

/// Registers `handler` as the signal handler of signum `num`.
///
/// # Safety
///
/// This is considered unsafe because the given handler will be called asynchronously, interrupting
/// whatever the thread was doing and therefore must only do async-signal-safe operations.
pub unsafe fn register_signal_handler(
    num: c_int,
    handler: extern "C" fn(c_int),
) -> errno::Result<()> {
    let mut sigact: sigaction = mem::zeroed();
    sigact.sa_flags = SA_RESTART;
    sigact.sa_sigaction = handler as *const () as usize;

    let ret = sigaction(num, &sigact, null_mut());
    if ret < 0 {
        return errno_result();
    }

    Ok(())
}

/// Resets the signal handler of signum `num` back to the default.
pub fn clear_signal_handler(num: c_int) -> errno::Result<()> {
    // Safe because sigaction is owned and expected to be initialized ot zeros.
    let mut sigact: sigaction = unsafe { mem::zeroed() };
    sigact.sa_flags = SA_RESTART;
    sigact.sa_sigaction = SIG_DFL;

    // Safe because sigact is owned, and this is restoring the default signal handler.
    let ret = unsafe { sigaction(num, &sigact, null_mut()) };
    if ret < 0 {
        return errno_result();
    }

    Ok(())
}

/// Returns true if the signal handler for signum `num` is the default.
pub fn has_default_signal_handler(num: c_int) -> errno::Result<bool> {
    // Safe because sigaction is owned and expected to be initialized ot zeros.
    let mut sigact: sigaction = unsafe { mem::zeroed() };

    // Safe because sigact is owned, and this is just querying the existing state.
    let ret = unsafe { sigaction(num, null(), &mut sigact) };
    if ret < 0 {
        return errno_result();
    }

    Ok(sigact.sa_sigaction == SIG_DFL)
}

/// Registers `handler` as the signal handler for the real-time signal with signum `num`.
///
/// The value of `num` must be within [`SIGRTMIN`, `SIGRTMAX`] range.
///
/// # Safety
///
/// This is considered unsafe because the given handler will be called asynchronously, interrupting
/// whatever the thread was doing and therefore must only do async-signal-safe operations.
pub unsafe fn register_rt_signal_handler(
    num: c_int,
    handler: extern "C" fn(c_int),
) -> errno::Result<()> {
    if !valid_rt_signal_num(num) {
        return Err(errno::Error::new(EINVAL));
    }

    register_signal_handler(num, handler)
}

/// Creates `sigset` from an array of signal numbers.
///
/// This is a helper function used when we want to manipulate signals.
pub fn create_sigset(signals: &[c_int]) -> errno::Result<sigset_t> {
    // sigset will actually be initialized by sigemptyset below.
    let mut sigset: sigset_t = unsafe { mem::zeroed() };

    // Safe - return value is checked.
    let ret = unsafe { sigemptyset(&mut sigset) };
    if ret < 0 {
        return errno_result();
    }

    for signal in signals {
        // Safe - return value is checked.
        let ret = unsafe { sigaddset(&mut sigset, *signal) };
        if ret < 0 {
            return errno_result();
        }
    }

    Ok(sigset)
}

/// Wait for signal before continuing. The signal number of the consumed signal is returned on
/// success. EAGAIN means the timeout was reached.
pub fn wait_for_signal(signals: &[c_int], timeout: Option<Duration>) -> errno::Result<c_int> {
    let sigset = create_sigset(signals)?;

    match timeout {
        Some(timeout) => {
            let ts = duration_to_timespec(timeout);
            // Safe - return value is checked.
            let ret = handle_eintr_errno!(unsafe { sigtimedwait(&sigset, null_mut(), &ts) });
            if ret < 0 {
                errno_result()
            } else {
                Ok(ret)
            }
        }
        None => {
            let mut ret: c_int = 0;
            let err = handle_eintr_rc!(unsafe { sigwait(&sigset, &mut ret as *mut c_int) });
            if err != 0 {
                Err(errno::Error::new(err))
            } else {
                Ok(ret)
            }
        }
    }
}

/// Retrieves the signal mask of the current thread as a vector of c_ints.
pub fn get_blocked_signals() -> SignalResult<Vec<c_int>> {
    let mut mask = Vec::new();

    // Safe - return values are checked.
    unsafe {
        let mut old_sigset: sigset_t = mem::zeroed();
        let ret = pthread_sigmask(SIG_BLOCK, null(), &mut old_sigset as *mut sigset_t);
        if ret < 0 {
            return Err(Error::RetrieveSignalMask(ret));
        }

        for num in 0..=SIGRTMAX() {
            if sigismember(&old_sigset, num) > 0 {
                mask.push(num);
            }
        }
    }

    Ok(mask)
}

/// Masks given signal.
///
/// If signal is already blocked the call will fail with Error::SignalAlreadyBlocked
/// result.
pub fn block_signal(num: c_int) -> SignalResult<()> {
    let sigset = create_sigset(&[num]).map_err(Error::CreateSigset)?;

    // Safe - return values are checked.
    unsafe {
        let mut old_sigset: sigset_t = mem::zeroed();
        let ret = pthread_sigmask(SIG_BLOCK, &sigset, &mut old_sigset as *mut sigset_t);
        if ret < 0 {
            return Err(Error::BlockSignal(errno::Error::last()));
        }
        let ret = sigismember(&old_sigset, num);
        match ret.cmp(&0) {
            Ordering::Less => {
                return Err(Error::CompareBlockedSignals(errno::Error::last()));
            }
            Ordering::Greater => {
                return Err(Error::SignalAlreadyBlocked(num));
            }
            _ => (),
        };
    }
    Ok(())
}

/// Unmasks given signal.
pub fn unblock_signal(num: c_int) -> SignalResult<()> {
    let sigset = create_sigset(&[num]).map_err(Error::CreateSigset)?;

    // Safe - return value is checked.
    let ret = unsafe { pthread_sigmask(SIG_UNBLOCK, &sigset, null_mut()) };
    if ret < 0 {
        return Err(Error::UnblockSignal(errno::Error::last()));
    }
    Ok(())
}

/// Clears pending signal.
pub fn clear_signal(num: c_int) -> SignalResult<()> {
    let sigset = create_sigset(&[num]).map_err(Error::CreateSigset)?;

    while {
        // This is safe as we are rigorously checking return values
        // of libc calls.
        unsafe {
            let mut siginfo: siginfo_t = mem::zeroed();
            let ts = timespec {
                tv_sec: 0,
                tv_nsec: 0,
            };
            // Attempt to consume one instance of pending signal. If signal
            // is not pending, the call will fail with EAGAIN or EINTR.
            let ret = sigtimedwait(&sigset, &mut siginfo, &ts);
            if ret < 0 {
                let e = errno::Error::last();
                match e.errno() {
                    EAGAIN | EINTR => {}
                    _ => {
                        return Err(Error::ClearWaitPending(errno::Error::last()));
                    }
                }
            }

            // This sigset will be actually filled with `sigpending` call.
            let mut chkset: sigset_t = mem::zeroed();
            // See if more instances of the signal are pending.
            let ret = sigpending(&mut chkset);
            if ret < 0 {
                return Err(Error::ClearGetPending(errno::Error::last()));
            }

            let ret = sigismember(&chkset, num);
            if ret < 0 {
                return Err(Error::ClearCheckPending(errno::Error::last()));
            }

            // This is do-while loop condition.
            ret != 0
        }
    } {}

    Ok(())
}

/// # Safety
/// This is marked unsafe because it allows signals to be sent to arbitrary PIDs. Sending some
/// signals may lead to undefined behavior. Also, the return codes of the child processes need to be
/// reaped to avoid leaking zombie processes.
pub unsafe fn kill(pid: Pid, signum: c_int) -> Result<()> {
    let ret = libc::kill(pid, signum);

    if ret != 0 {
        errno_result()
    } else {
        Ok(())
    }
}

/// Trait for threads that can be signalled via `pthread_kill`.
///
/// Note that this is only useful for signals between SIGRTMIN and SIGRTMAX because these are
/// guaranteed to not be used by the C runtime.
///
/// This is marked unsafe because the implementation of this trait must guarantee that the returned
/// pthread_t is valid and has a lifetime at least that of the trait object.
pub unsafe trait Killable {
    fn pthread_handle(&self) -> pthread_t;

    /// Sends the signal `num` to this killable thread.
    ///
    /// The value of `num` must be within [`SIGRTMIN`, `SIGRTMAX`] range.
    fn kill(&self, num: c_int) -> errno::Result<()> {
        if !valid_rt_signal_num(num) {
            return Err(errno::Error::new(EINVAL));
        }

        // Safe because we ensure we are using a valid pthread handle, a valid signal number, and
        // check the return result.
        let ret = unsafe { pthread_kill(self.pthread_handle(), num) };
        if ret < 0 {
            return errno_result();
        }
        Ok(())
    }
}

// Safe because we fulfill our contract of returning a genuine pthread handle.
unsafe impl<T> Killable for JoinHandle<T> {
    fn pthread_handle(&self) -> pthread_t {
        self.as_pthread_t()
    }
}

/// Treat some errno's as Ok(()).
macro_rules! ok_if {
    ($result:expr, $($errno:pat)|+) => {{
    let res = $result;
    match res {
        Ok(_) => Ok(()),
        Err(err) => {
            if matches!(err.errno(), $($errno)|+) {
                Ok(())
            } else {
                Err(err)
            }
        }
    }
    }}
}

/// Terminates and reaps a child process. If the child process is a group leader, its children will
/// be terminated and reaped as well. After the given timeout, the child process and any relevant
/// children are killed (i.e. sent SIGKILL).
pub fn kill_tree(child: &mut Child, terminate_timeout: Duration) -> SignalResult<()> {
    let target = {
        let pid = child.id() as Pid;
        if getsid(Some(pid)).map_err(Error::GetSid)? == pid {
            -pid
        } else {
            pid
        }
    };

    // Safe because target is a child process (or group) and behavior of SIGTERM is defined.
    ok_if!(unsafe { kill(target, libc::SIGTERM) }, libc::ESRCH).map_err(Error::Kill)?;

    // Reap the direct child first in case it waits for its descendants, afterward reap any
    // remaining group members.
    let start = Instant::now();
    let mut child_running = true;
    loop {
        // Wait for the direct child to exit before reaping any process group members.
        if child_running {
            if child
                .try_wait()
                .map_err(|e| Error::WaitPid(errno::Error::from(e)))?
                .is_some()
            {
                child_running = false;
                // Skip the timeout check because waitpid(..., WNOHANG) will not block.
                continue;
            }
        } else {
            // Safe because target is a child process (or group), WNOHANG is used, and the return
            // value is checked.
            let ret = unsafe { waitpid(target, null_mut(), WNOHANG) };
            match ret {
                -1 => {
                    let err = errno::Error::last();
                    if err.errno() == libc::ECHILD {
                        // No group members to wait on.
                        break;
                    }
                    return Err(Error::WaitPid(err));
                }
                0 => {}
                // If a process was reaped, skip the timeout check in case there are more.
                _ => continue,
            };
        }

        // Check for a timeout.
        let elapsed = start.elapsed();
        if elapsed > terminate_timeout {
            // Safe because target is a child process (or group) and behavior of SIGKILL is defined.
            ok_if!(unsafe { kill(target, libc::SIGKILL) }, libc::ESRCH).map_err(Error::Kill)?;
            return Err(Error::TimedOut);
        }

        // Wait a SIGCHLD or until either the remaining time or a poll interval elapses.
        ok_if!(
            wait_for_signal(
                &[libc::SIGCHLD],
                Some(POLL_RATE.min(terminate_timeout - elapsed))
            ),
            libc::EAGAIN | libc::EINTR
        )
        .map_err(Error::WaitForSignal)?
    }

    Ok(())
}

/// Wraps a Child process, and calls kill_tree for its process group to clean
/// it up when dropped.
pub struct KillOnDrop {
    process: Child,
    timeout: Duration,
}

impl KillOnDrop {
    /// Get the timeout. See timeout_mut() for more details.
    pub fn timeout(&self) -> Duration {
        self.timeout
    }

    /// Change the timeout for how long child processes are waited for before
    /// the process group is forcibly killed.
    pub fn timeout_mut(&mut self) -> &mut Duration {
        &mut self.timeout
    }
}

impl From<Child> for KillOnDrop {
    fn from(process: Child) -> Self {
        KillOnDrop {
            process,
            timeout: DEFAULT_KILL_TIMEOUT,
        }
    }
}

impl AsRef<Child> for KillOnDrop {
    fn as_ref(&self) -> &Child {
        &self.process
    }
}

impl AsMut<Child> for KillOnDrop {
    fn as_mut(&mut self) -> &mut Child {
        &mut self.process
    }
}

impl Deref for KillOnDrop {
    type Target = Child;

    fn deref(&self) -> &Self::Target {
        &self.process
    }
}

impl DerefMut for KillOnDrop {
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.process
    }
}

impl Drop for KillOnDrop {
    fn drop(&mut self) {
        if let Err(err) = kill_tree(&mut self.process, self.timeout) {
            eprintln!("failed to kill child process group: {}", err);
        }
    }
}