/* * Copyright 2005-2016 Apple Inc. All rights reserved. * * IMPORTANT: This Apple software is supplied to you by Apple Computer, * Inc. ("Apple") in consideration of your agreement to the following * terms, and your use, installation, modification or redistribution of * this Apple software constitutes acceptance of these terms. If you do * not agree with these terms, please do not use, install, modify or * redistribute this Apple software. * * In consideration of your agreement to abide by the following terms, and * subject to these terms, Apple grants you a personal, non-exclusive * license, under Apple's copyrights in this original Apple software (the * "Apple Software"), to use, reproduce, modify and redistribute the Apple * Software, with or without modifications, in source and/or binary forms; * provided that if you redistribute the Apple Software in its entirety and * without modifications, you must retain this notice and the following * text and disclaimers in all such redistributions of the Apple Software. * Neither the name, trademarks, service marks or logos of Apple Computer, * Inc. may be used to endorse or promote products derived from the Apple * Software without specific prior written permission from Apple. Except * as expressly stated in this notice, no other rights or licenses, express * or implied, are granted by Apple herein, including but not limited to * any patent rights that may be infringed by your derivative works or by * other works in which the Apple Software may be incorporated. * * The Apple Software is provided by Apple on an "AS IS" basis. APPLE * MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION * THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE, REGARDING THE APPLE SOFTWARE OR ITS USE AND * OPERATION ALONE OR IN COMBINATION WITH YOUR PRODUCTS. * * IN NO EVENT SHALL APPLE BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) ARISING IN ANY WAY OUT OF THE USE, REPRODUCTION, * MODIFICATION AND/OR DISTRIBUTION OF THE APPLE SOFTWARE, HOWEVER CAUSED * AND WHETHER UNDER THEORY OF CONTRACT, TORT (INCLUDING NEGLIGENCE), * STRICT LIABILITY OR OTHERWISE, EVEN IF APPLE HAS BEEN ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Include necessary headers. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "backend-private.h" #include #include #include #include #include #include #include /* * Include necessary headers. */ extern char **environ; /* * DEBUG_WRITES, if defined, causes the backend to write data to the printer in * 512 byte increments, up to 8192 bytes, to make debugging with a USB bus * analyzer easier. */ #define DEBUG_WRITES 0 /* * WAIT_EOF_DELAY is number of seconds we'll wait for responses from * the printer after we've finished sending all the data */ #define WAIT_EOF_DELAY 7 #define WAIT_SIDE_DELAY 3 #define DEFAULT_TIMEOUT 5000L #define USB_INTERFACE_KIND CFUUIDGetUUIDBytes(kIOUSBInterfaceInterfaceID245) #define kUSBLanguageEnglish 0x409 #define PRINTER_POLLING_INTERVAL 5 /* seconds */ #define INITIAL_LOG_INTERVAL PRINTER_POLLING_INTERVAL #define SUBSEQUENT_LOG_INTERVAL 3 * INITIAL_LOG_INTERVAL #define kUSBPrinterClassTypeID CFUUIDGetConstantUUIDWithBytes(NULL, 0x06, 0x04, 0x7D, 0x16, 0x53, 0xA2, 0x11, 0xD6, 0x92, 0x06, 0x00, 0x30, 0x65, 0x52, 0x45, 0x92) #define kUSBPrinterClassInterfaceID CFUUIDGetConstantUUIDWithBytes(NULL, 0x03, 0x34, 0x6D, 0x74, 0x53, 0xA3, 0x11, 0xD6, 0x9E, 0xA1, 0x76, 0x30, 0x65, 0x52, 0x45, 0x92) #define kUSBClassDriverProperty CFSTR("USB Printing Class") #define kUSBGenericTOPrinterClassDriver CFSTR("/System/Library/Printers/Libraries/USBGenericPrintingClass.plugin") #define kUSBPrinterClassDeviceNotOpen -9664 /*kPMInvalidIOMContext*/ #define CRSetCrashLogMessage(m) _crc_make_setter(message, m) #define _crc_make_setter(attr, arg) (gCRAnnotations.attr = (uint64_t)(unsigned long)(arg)) #define CRASH_REPORTER_CLIENT_HIDDEN __attribute__((visibility("hidden"))) #define CRASHREPORTER_ANNOTATIONS_VERSION 4 #define CRASHREPORTER_ANNOTATIONS_SECTION "__crash_info" struct crashreporter_annotations_t { uint64_t version; // unsigned long uint64_t message; // char * uint64_t signature_string; // char * uint64_t backtrace; // char * uint64_t message2; // char * uint64_t thread; // uint64_t uint64_t dialog_mode; // unsigned int }; CRASH_REPORTER_CLIENT_HIDDEN struct crashreporter_annotations_t gCRAnnotations __attribute__((section("__DATA," CRASHREPORTER_ANNOTATIONS_SECTION))) = { CRASHREPORTER_ANNOTATIONS_VERSION, 0, 0, 0, 0, 0, 0 }; /* * Section 5.3 USB Printing Class spec */ #define kUSBPrintingSubclass 1 #define kUSBPrintingProtocolNoOpen 0 #define kUSBPrintingProtocolUnidirectional 1 #define kUSBPrintingProtocolBidirectional 2 #define kUSBPrintingProtocolIPP 4 typedef IOUSBInterfaceInterface245 **printer_interface_t; typedef struct iodevice_request_s /**** Device request ****/ { UInt8 requestType; UInt8 request; UInt16 value; UInt16 index; UInt16 length; void *buffer; } iodevice_request_t; typedef union /**** Centronics status byte ****/ { char b; struct { unsigned reserved0:2; unsigned paperError:1; unsigned select:1; unsigned notError:1; unsigned reserved1:3; } status; } centronics_status_t; typedef struct classdriver_s /**** g.classdriver context ****/ { IUNKNOWN_C_GUTS; CFPlugInRef plugin; /* release plugin */ IUnknownVTbl **factory; /* Factory */ void *vendorReference; /* vendor class specific usage */ UInt32 location; /* unique location in bus topology */ UInt8 interfaceNumber; /* Interface number */ UInt16 vendorID; /* Vendor id */ UInt16 productID; /* Product id */ printer_interface_t interface; /* identify the device to IOKit */ UInt8 outpipe; /* mandatory bulkOut pipe */ UInt8 inpipe; /* optional bulkIn pipe */ /* general class requests */ kern_return_t (*DeviceRequest)(struct classdriver_s **printer, iodevice_request_t *iorequest, UInt16 timeout); kern_return_t (*GetString)(struct classdriver_s **printer, UInt8 whichString, UInt16 language, UInt16 timeout, CFStringRef *result); /* standard printer class requests */ kern_return_t (*SoftReset)(struct classdriver_s **printer, UInt16 timeout); kern_return_t (*GetCentronicsStatus)(struct classdriver_s **printer, centronics_status_t *result, UInt16 timeout); kern_return_t (*GetDeviceID)(struct classdriver_s **printer, CFStringRef *devid, UInt16 timeout); /* standard bulk device requests */ kern_return_t (*ReadPipe)(struct classdriver_s **printer, UInt8 *buffer, UInt32 *count); kern_return_t (*WritePipe)(struct classdriver_s **printer, UInt8 *buffer, UInt32 *count, Boolean eoj); /* interface requests */ kern_return_t (*Open)(struct classdriver_s **printer, UInt32 location, UInt8 protocol); kern_return_t (*Abort)(struct classdriver_s **printer); kern_return_t (*Close)(struct classdriver_s **printer); /* initialize and terminate */ kern_return_t (*Initialize)(struct classdriver_s **printer, struct classdriver_s **baseclass); kern_return_t (*Terminate)(struct classdriver_s **printer); } classdriver_t; typedef Boolean (*iterator_callback_t)(io_service_t obj, printer_interface_t printerIntf, void *refcon); typedef struct iterator_reference_s /**** Iterator reference data */ { iterator_callback_t callback; void *userdata; Boolean keepRunning; } iterator_reference_t; typedef struct globals_s { io_service_t printer_obj; classdriver_t **classdriver; pthread_mutex_t read_thread_mutex; pthread_cond_t read_thread_cond; int read_thread_stop; int read_thread_done; pthread_mutex_t readwrite_lock_mutex; pthread_cond_t readwrite_lock_cond; int readwrite_lock; CFStringRef make; CFStringRef model; CFStringRef serial; UInt32 location; UInt8 interfaceNum; UInt8 alternateSetting; UInt8 interfaceProtocol; CFRunLoopTimerRef status_timer; int print_fd; /* File descriptor to print */ ssize_t print_bytes; /* Print bytes read */ #if DEBUG_WRITES ssize_t debug_bytes; /* Current bytes to read */ #endif /* DEBUG_WRITES */ Boolean use_generic_class_driver; Boolean wait_eof; int drain_output; /* Drain all pending output */ int bidi_flag; /* 0=unidirectional, 1=bidirectional */ pthread_mutex_t sidechannel_thread_mutex; pthread_cond_t sidechannel_thread_cond; int sidechannel_thread_stop; int sidechannel_thread_done; } globals_t; /* * Globals... */ globals_t g = { 0 }; /* Globals */ int Iterating = 0; /* Are we iterating the bus? */ /* * Local functions... */ static Boolean list_device_cb(io_service_t obj, printer_interface_t printerIntf, void *refcon); static Boolean find_device_cb(io_service_t obj, printer_interface_t printerIntf, void *refcon); static CFStringRef cfstr_create_trim(const char *cstr); static CFStringRef copy_value_for_key(CFStringRef deviceID, CFStringRef *keys); static kern_return_t load_classdriver(CFStringRef driverPath, printer_interface_t interface, classdriver_t ***printerDriver); static kern_return_t load_printerdriver(CFStringRef *driverBundlePath); static kern_return_t registry_close(void); static kern_return_t registry_open(CFStringRef *driverBundlePath); static kern_return_t unload_classdriver(classdriver_t ***classdriver); static void *read_thread(void *reference); static void *sidechannel_thread(void *reference); static void device_added(void *userdata, io_iterator_t iterator); static void get_device_id(cups_sc_status_t *status, char *data, int *datalen); static void iterate_printers(iterator_callback_t callBack, void *userdata); static void parse_options(char *options, char *serial, int serial_size, UInt32 *location, Boolean *wait_eof); static void setup_cfLanguage(void); static void soft_reset(void); static void status_timer_cb(CFRunLoopTimerRef timer, void *info); #define IS_64BIT 1 #define IS_NOT_64BIT 0 #if defined(__i386__) || defined(__x86_64__) static pid_t child_pid; /* Child PID */ static void run_legacy_backend(int argc, char *argv[], int fd) _CUPS_NORETURN; /* Starts child backend process running as a ppc executable */ #endif /* __i386__ || __x86_64__ */ static void sigterm_handler(int sig); /* SIGTERM handler */ static void sigquit_handler(int sig, siginfo_t *si, void *unused) _CUPS_NORETURN; #ifdef PARSE_PS_ERRORS static const char *next_line (const char *buffer); static void parse_pserror (char *sockBuffer, int len); #endif /* PARSE_PS_ERRORS */ static printer_interface_t usb_printer_interface_interface(io_service_t usbClass); static CFStringRef copy_printer_interface_deviceid(printer_interface_t printer, UInt8 alternateSetting); static CFStringRef copy_printer_interface_indexed_description(printer_interface_t printer, UInt8 index, UInt16 language); static CFStringRef deviceIDCopyManufacturer(CFStringRef deviceID); static CFStringRef deviceIDCopyModel(CFStringRef deviceID); static CFStringRef deviceIDCopySerialNumber(CFStringRef deviceID); #pragma mark - /* * 'list_devices()' - List all USB devices. */ void list_devices() { iterate_printers(list_device_cb, NULL); } /* * 'print_device()' - Print a file to a USB device. */ int /* O - Exit status */ print_device(const char *uri, /* I - Device URI */ const char *hostname, /* I - Hostname/manufacturer */ const char *resource, /* I - Resource/modelname */ char *options, /* I - Device options/serial number */ int print_fd, /* I - File descriptor to print */ int copies, /* I - Copies to print */ int argc, /* I - Number of command-line arguments (6 or 7) */ char *argv[]) /* I - Command-line arguments */ { char serial[1024]; /* Serial number buffer */ OSStatus status; /* Function results */ IOReturn iostatus; /* Current IO status */ pthread_t read_thread_id, /* Read thread */ sidechannel_thread_id;/* Side-channel thread */ int have_sidechannel = 0; /* Was the side-channel thread started? */ struct stat sidechannel_info; /* Side-channel file descriptor info */ char print_buffer[8192], /* Print data buffer */ *print_ptr; /* Pointer into print data buffer */ UInt32 location; /* Unique location in bus topology */ fd_set input_set; /* Input set for select() */ CFStringRef driverBundlePath; /* Class driver path */ int countdown, /* Logging interval */ nfds; /* Number of file descriptors */ ssize_t total_bytes; /* Total bytes written */ UInt32 bytes; /* Bytes written */ struct timeval *timeout, /* Timeout pointer */ tv; /* Time value */ struct timespec cond_timeout; /* pthread condition timeout */ struct sigaction action; /* Actions for POSIX signals */ (void)uri; /* * Catch SIGQUIT to determine who is sending it... */ memset(&action, 0, sizeof(action)); action.sa_sigaction = sigquit_handler; action.sa_flags = SA_SIGINFO; sigaction(SIGQUIT, &action, NULL); /* * See if the side-channel descriptor is valid... */ have_sidechannel = !fstat(CUPS_SC_FD, &sidechannel_info) && S_ISSOCK(sidechannel_info.st_mode); /* * Localize using CoreFoundation... */ setup_cfLanguage(); parse_options(options, serial, sizeof(serial), &location, &g.wait_eof); if (resource[0] == '/') resource++; g.print_fd = print_fd; g.make = cfstr_create_trim(hostname); g.model = cfstr_create_trim(resource); g.serial = cfstr_create_trim(serial); g.location = location; if (!g.make || !g.model) { fprintf(stderr, "DEBUG: Fatal USB error.\n"); _cupsLangPrintFilter(stderr, "ERROR", _("There was an unrecoverable USB error.")); if (!g.make) fputs("DEBUG: USB make string is NULL\n", stderr); if (!g.model) fputs("DEBUG: USB model string is NULL\n", stderr); return (CUPS_BACKEND_STOP); } fputs("STATE: +connecting-to-device\n", stderr); countdown = INITIAL_LOG_INTERVAL; do { if (g.printer_obj) { IOObjectRelease(g.printer_obj); unload_classdriver(&g.classdriver); g.printer_obj = 0x0; g.classdriver = 0x0; } fprintf(stderr, "DEBUG: Looking for '%s %s'\n", hostname, resource); do { iterate_printers(find_device_cb, NULL); if (g.printer_obj != 0x0) break; _cupsLangPrintFilter(stderr, "INFO", _("Waiting for printer to become available.")); sleep(5); } while (true); fputs("DEBUG: Opening connection\n", stderr); driverBundlePath = NULL; status = registry_open(&driverBundlePath); #if defined(__i386__) || defined(__x86_64__) /* * If we were unable to load the class drivers for this printer it's * probably because they're ppc or i386. In this case try to run this * backend as i386 or ppc executables so we can use them... */ if (status == -2) { run_legacy_backend(argc, argv, print_fd); /* Never returns here */ } #endif /* __i386__ || __x86_64__ */ if (status == -2) { /* * If we still were unable to load the class drivers for this printer log * the error and stop the queue... */ if (driverBundlePath == NULL || !CFStringGetCString(driverBundlePath, print_buffer, sizeof(print_buffer), kCFStringEncodingUTF8)) strlcpy(print_buffer, "USB class driver", sizeof(print_buffer)); fputs("STATE: +apple-missing-usbclassdriver-error\n", stderr); _cupsLangPrintFilter(stderr, "ERROR", _("There was an unrecoverable USB error.")); fprintf(stderr, "DEBUG: Could not load %s\n", print_buffer); if (driverBundlePath) CFRelease(driverBundlePath); return (CUPS_BACKEND_STOP); } if (driverBundlePath) CFRelease(driverBundlePath); if (status != noErr) { sleep(PRINTER_POLLING_INTERVAL); countdown -= PRINTER_POLLING_INTERVAL; if (countdown <= 0) { _cupsLangPrintFilter(stderr, "INFO", _("Waiting for printer to become available.")); fprintf(stderr, "DEBUG: USB printer status: 0x%08x\n", (int)status); countdown = SUBSEQUENT_LOG_INTERVAL; /* subsequent log entries, every 15 seconds */ } } } while (status != noErr); fputs("STATE: -connecting-to-device\n", stderr); /* * Now that we are "connected" to the port, ignore SIGTERM so that we * can finish out any page data the driver sends (e.g. to eject the * current page... Only ignore SIGTERM if we are printing data from * stdin (otherwise you can't cancel raw jobs...) */ if (!print_fd) { memset(&action, 0, sizeof(action)); sigemptyset(&action.sa_mask); action.sa_handler = SIG_IGN; sigaction(SIGTERM, &action, NULL); } /* * Start the side channel thread if the descriptor is valid... */ pthread_mutex_init(&g.readwrite_lock_mutex, NULL); pthread_cond_init(&g.readwrite_lock_cond, NULL); g.readwrite_lock = 1; if (have_sidechannel) { g.sidechannel_thread_stop = 0; g.sidechannel_thread_done = 0; pthread_cond_init(&g.sidechannel_thread_cond, NULL); pthread_mutex_init(&g.sidechannel_thread_mutex, NULL); if (pthread_create(&sidechannel_thread_id, NULL, sidechannel_thread, NULL)) { fprintf(stderr, "DEBUG: Fatal USB error.\n"); _cupsLangPrintFilter(stderr, "ERROR", _("There was an unrecoverable USB error.")); fputs("DEBUG: Couldn't create side-channel thread\n", stderr); registry_close(); return (CUPS_BACKEND_STOP); } } /* * Get the read thread going... */ g.read_thread_stop = 0; g.read_thread_done = 0; pthread_cond_init(&g.read_thread_cond, NULL); pthread_mutex_init(&g.read_thread_mutex, NULL); if (pthread_create(&read_thread_id, NULL, read_thread, NULL)) { fprintf(stderr, "DEBUG: Fatal USB error.\n"); _cupsLangPrintFilter(stderr, "ERROR", _("There was an unrecoverable USB error.")); fputs("DEBUG: Couldn't create read thread\n", stderr); registry_close(); return (CUPS_BACKEND_STOP); } /* * The main thread sends the print file... */ g.drain_output = 0; g.print_bytes = 0; total_bytes = 0; print_ptr = print_buffer; while (status == noErr && copies-- > 0) { _cupsLangPrintFilter(stderr, "INFO", _("Sending data to printer.")); if (print_fd != STDIN_FILENO) { fputs("PAGE: 1 1\n", stderr); lseek(print_fd, 0, SEEK_SET); } while (status == noErr) { FD_ZERO(&input_set); if (!g.print_bytes) FD_SET(print_fd, &input_set); /* * Calculate select timeout... * If we have data waiting to send timeout is 100ms. * else if we're draining print_fd timeout is 0. * else we're waiting forever... */ if (g.print_bytes) { tv.tv_sec = 0; tv.tv_usec = 100000; /* 100ms */ timeout = &tv; } else if (g.drain_output) { tv.tv_sec = 0; tv.tv_usec = 0; timeout = &tv; } else timeout = NULL; /* * I/O is unlocked around select... */ pthread_mutex_lock(&g.readwrite_lock_mutex); g.readwrite_lock = 0; pthread_cond_signal(&g.readwrite_lock_cond); pthread_mutex_unlock(&g.readwrite_lock_mutex); nfds = select(print_fd + 1, &input_set, NULL, NULL, timeout); /* * Reacquire the lock... */ pthread_mutex_lock(&g.readwrite_lock_mutex); while (g.readwrite_lock) pthread_cond_wait(&g.readwrite_lock_cond, &g.readwrite_lock_mutex); g.readwrite_lock = 1; pthread_mutex_unlock(&g.readwrite_lock_mutex); if (nfds < 0) { if (errno == EINTR && total_bytes == 0) { fputs("DEBUG: Received an interrupt before any bytes were " "written, aborting\n", stderr); registry_close(); return (CUPS_BACKEND_OK); } else if (errno != EAGAIN && errno != EINTR) { _cupsLangPrintFilter(stderr, "ERROR", _("Unable to read print data.")); perror("DEBUG: select"); registry_close(); return (CUPS_BACKEND_FAILED); } } /* * If drain output has finished send a response... */ if (g.drain_output && !nfds && !g.print_bytes) { /* Send a response... */ cupsSideChannelWrite(CUPS_SC_CMD_DRAIN_OUTPUT, CUPS_SC_STATUS_OK, NULL, 0, 1.0); g.drain_output = 0; } /* * Check if we have print data ready... */ if (FD_ISSET(print_fd, &input_set)) { #if DEBUG_WRITES g.debug_bytes += 512; if (g.debug_bytes > sizeof(print_buffer)) g.debug_bytes = 512; g.print_bytes = read(print_fd, print_buffer, g.debug_bytes); #else g.print_bytes = read(print_fd, print_buffer, sizeof(print_buffer)); #endif /* DEBUG_WRITES */ if (g.print_bytes < 0) { /* * Read error - bail if we don't see EAGAIN or EINTR... */ if (errno != EAGAIN && errno != EINTR) { _cupsLangPrintFilter(stderr, "ERROR", _("Unable to read print data.")); perror("DEBUG: read"); registry_close(); return (CUPS_BACKEND_FAILED); } g.print_bytes = 0; } else if (g.print_bytes == 0) { /* * End of file, break out of the loop... */ break; } print_ptr = print_buffer; fprintf(stderr, "DEBUG: Read %d bytes of print data...\n", (int)g.print_bytes); } if (g.print_bytes) { bytes = (UInt32)g.print_bytes; iostatus = (*g.classdriver)->WritePipe(g.classdriver, (UInt8*)print_ptr, &bytes, 0); /* * Ignore timeout errors, but retain the number of bytes written to * avoid sending duplicate data... */ if (iostatus == kIOUSBTransactionTimeout) { fputs("DEBUG: Got USB transaction timeout during write\n", stderr); iostatus = 0; } /* * If we've stalled, retry the write... */ else if (iostatus == kIOUSBPipeStalled) { fputs("DEBUG: Got USB pipe stalled during write\n", stderr); bytes = (UInt32)g.print_bytes; iostatus = (*g.classdriver)->WritePipe(g.classdriver, (UInt8*)print_ptr, &bytes, 0); } /* * Retry a write after an aborted write since we probably just got * SIGTERM... */ else if (iostatus == kIOReturnAborted) { fputs("DEBUG: Got USB return aborted during write\n", stderr); IOReturn err = (*g.classdriver)->Abort(g.classdriver); fprintf(stderr, "DEBUG: USB class driver Abort returned %x\n", err); #if DEBUG_WRITES sleep(5); #endif /* DEBUG_WRITES */ bytes = (UInt32)g.print_bytes; iostatus = (*g.classdriver)->WritePipe(g.classdriver, (UInt8*)print_ptr, &bytes, 0); } if (iostatus) { /* * Write error - bail if we don't see an error we can retry... */ _cupsLangPrintFilter(stderr, "ERROR", _("Unable to send data to printer.")); fprintf(stderr, "DEBUG: USB class driver WritePipe returned %x\n", iostatus); IOReturn err = (*g.classdriver)->Abort(g.classdriver); fprintf(stderr, "DEBUG: USB class driver Abort returned %x\n", err); status = CUPS_BACKEND_FAILED; break; } else if (bytes > 0) { fprintf(stderr, "DEBUG: Wrote %d bytes of print data...\n", (int)bytes); g.print_bytes -= bytes; print_ptr += bytes; total_bytes += bytes; } } if (print_fd != 0 && status == noErr) fprintf(stderr, "DEBUG: Sending print file, %lld bytes...\n", (off_t)total_bytes); } } fprintf(stderr, "DEBUG: Sent %lld bytes...\n", (off_t)total_bytes); fputs("STATE: +cups-waiting-for-job-completed\n", stderr); /* * Signal the side channel thread to exit... */ if (have_sidechannel) { close(CUPS_SC_FD); pthread_mutex_lock(&g.readwrite_lock_mutex); g.readwrite_lock = 0; pthread_cond_signal(&g.readwrite_lock_cond); pthread_mutex_unlock(&g.readwrite_lock_mutex); g.sidechannel_thread_stop = 1; pthread_mutex_lock(&g.sidechannel_thread_mutex); if (!g.sidechannel_thread_done) { gettimeofday(&tv, NULL); cond_timeout.tv_sec = tv.tv_sec + WAIT_SIDE_DELAY; cond_timeout.tv_nsec = tv.tv_usec * 1000; while (!g.sidechannel_thread_done) { if (pthread_cond_timedwait(&g.sidechannel_thread_cond, &g.sidechannel_thread_mutex, &cond_timeout) != 0) break; } } pthread_mutex_unlock(&g.sidechannel_thread_mutex); } /* * Signal the read thread to exit then wait 7 seconds for it to complete... */ g.read_thread_stop = 1; pthread_mutex_lock(&g.read_thread_mutex); if (!g.read_thread_done) { fputs("DEBUG: Waiting for read thread to exit...\n", stderr); gettimeofday(&tv, NULL); cond_timeout.tv_sec = tv.tv_sec + WAIT_EOF_DELAY; cond_timeout.tv_nsec = tv.tv_usec * 1000; while (!g.read_thread_done) { if (pthread_cond_timedwait(&g.read_thread_cond, &g.read_thread_mutex, &cond_timeout) != 0) break; } /* * If it didn't exit abort the pending read and wait an additional second... */ if (!g.read_thread_done) { fputs("DEBUG: Read thread still active, aborting the pending read...\n", stderr); g.wait_eof = 0; (*g.classdriver)->Abort(g.classdriver); gettimeofday(&tv, NULL); cond_timeout.tv_sec = tv.tv_sec + 1; cond_timeout.tv_nsec = tv.tv_usec * 1000; while (!g.read_thread_done) { if (pthread_cond_timedwait(&g.read_thread_cond, &g.read_thread_mutex, &cond_timeout) != 0) break; } } } pthread_mutex_unlock(&g.read_thread_mutex); /* * Close the connection and input file and general clean up... */ registry_close(); if (print_fd != STDIN_FILENO) close(print_fd); if (g.make != NULL) CFRelease(g.make); if (g.model != NULL) CFRelease(g.model); if (g.serial != NULL) CFRelease(g.serial); if (g.printer_obj != 0x0) IOObjectRelease(g.printer_obj); return status; } /* * 'read_thread()' - Thread to read the backchannel data on. */ static void *read_thread(void *reference) { UInt8 readbuffer[512]; UInt32 rbytes; kern_return_t readstatus; struct mach_timebase_info timeBaseInfo; uint64_t start, delay; (void)reference; /* Calculate what 250 milliSeconds are in mach absolute time... */ mach_timebase_info(&timeBaseInfo); delay = ((uint64_t)250000000 * (uint64_t)timeBaseInfo.denom) / (uint64_t)timeBaseInfo.numer; do { /* * Remember when we started so we can throttle the loop after the read call... */ start = mach_absolute_time(); rbytes = sizeof(readbuffer); readstatus = (*g.classdriver)->ReadPipe(g.classdriver, readbuffer, &rbytes); if (readstatus == kIOReturnSuccess && rbytes > 0) { fprintf(stderr, "DEBUG: Read %d bytes of back-channel data...\n", (int)rbytes); cupsBackChannelWrite((char*)readbuffer, rbytes, 1.0); /* cntrl-d is echoed by the printer. * NOTES: * Xerox Phaser 6250D doesn't echo the cntrl-d. * Xerox Phaser 6250D doesn't always send the product query. */ if (g.wait_eof && readbuffer[rbytes-1] == 0x4) break; #ifdef PARSE_PS_ERRORS parse_pserror(readbuffer, rbytes); #endif } else if (readstatus == kIOUSBTransactionTimeout) fputs("DEBUG: Got USB transaction timeout during read\n", stderr); else if (readstatus == kIOUSBPipeStalled) fputs("DEBUG: Got USB pipe stalled during read\n", stderr); else if (readstatus == kIOReturnAborted) fputs("DEBUG: Got USB return aborted during read\n", stderr); /* * Make sure this loop executes no more than once every 250 miliseconds... */ if ((readstatus != kIOReturnSuccess || rbytes == 0) && (g.wait_eof || !g.read_thread_stop)) mach_wait_until(start + delay); } while (g.wait_eof || !g.read_thread_stop); /* Abort from main thread tests error here */ /* Workaround for usb race condition. */ if (!g.wait_eof && g.use_generic_class_driver) { const char *pdl = getenv("FINAL_CONTENT_TYPE"); if (pdl && strcmp(pdl, "application/vnd.cups-postscript") == 0) { while (readstatus == kIOReturnSuccess && ((rbytes > 0 && readbuffer[rbytes-1] != 0x4) || rbytes == 0)) { start = mach_absolute_time(); rbytes = sizeof(readbuffer); readstatus = (*g.classdriver)->ReadPipe(g.classdriver, readbuffer, &rbytes); if (readstatus == kIOReturnSuccess && rbytes > 0 && readbuffer[rbytes-1] == 0x4) break; /* Make sure this loop executes no more than once every 250 miliseconds... */ mach_wait_until(start + delay); } } } /* * Let the main thread know that we have completed the read thread... */ pthread_mutex_lock(&g.read_thread_mutex); g.read_thread_done = 1; pthread_cond_signal(&g.read_thread_cond); pthread_mutex_unlock(&g.read_thread_mutex); return NULL; } /* * 'sidechannel_thread()' - Handle side-channel requests. */ static void* sidechannel_thread(void *reference) { cups_sc_command_t command; /* Request command */ cups_sc_status_t status; /* Request/response status */ char data[2048]; /* Request/response data */ int datalen; /* Request/response data size */ (void)reference; do { datalen = sizeof(data); if (cupsSideChannelRead(&command, &status, data, &datalen, 1.0)) { if (status == CUPS_SC_STATUS_TIMEOUT) continue; else break; } switch (command) { case CUPS_SC_CMD_SOFT_RESET: /* Do a soft reset */ fputs("DEBUG: CUPS_SC_CMD_SOFT_RESET received from driver...\n", stderr); if ((*g.classdriver)->SoftReset != NULL) { soft_reset(); cupsSideChannelWrite(command, CUPS_SC_STATUS_OK, NULL, 0, 1.0); fputs("DEBUG: Returning status CUPS_STATUS_OK with no bytes...\n", stderr); } else { cupsSideChannelWrite(command, CUPS_SC_STATUS_NOT_IMPLEMENTED, NULL, 0, 1.0); fputs("DEBUG: Returning status CUPS_STATUS_NOT_IMPLEMENTED with " "no bytes...\n", stderr); } break; case CUPS_SC_CMD_DRAIN_OUTPUT: /* Drain all pending output */ fputs("DEBUG: CUPS_SC_CMD_DRAIN_OUTPUT received from driver...\n", stderr); g.drain_output = 1; break; case CUPS_SC_CMD_GET_BIDI: /* Is the connection bidirectional? */ fputs("DEBUG: CUPS_SC_CMD_GET_BIDI received from driver...\n", stderr); data[0] = (char)g.bidi_flag; cupsSideChannelWrite(command, CUPS_SC_STATUS_OK, data, 1, 1.0); fprintf(stderr, "DEBUG: Returned CUPS_SC_STATUS_OK with 1 byte (%02X)...\n", data[0]); break; case CUPS_SC_CMD_GET_DEVICE_ID: /* Return IEEE-1284 device ID */ fputs("DEBUG: CUPS_SC_CMD_GET_DEVICE_ID received from driver...\n", stderr); datalen = sizeof(data); get_device_id(&status, data, &datalen); cupsSideChannelWrite(command, CUPS_SC_STATUS_OK, data, datalen, 1.0); if ((size_t)datalen < sizeof(data)) data[datalen] = '\0'; else data[sizeof(data) - 1] = '\0'; fprintf(stderr, "DEBUG: Returning CUPS_SC_STATUS_OK with %d bytes (%s)...\n", datalen, data); break; case CUPS_SC_CMD_GET_STATE: /* Return device state */ fputs("DEBUG: CUPS_SC_CMD_GET_STATE received from driver...\n", stderr); data[0] = CUPS_SC_STATE_ONLINE; cupsSideChannelWrite(command, CUPS_SC_STATUS_OK, data, 1, 1.0); fprintf(stderr, "DEBUG: Returned CUPS_SC_STATUS_OK with 1 byte (%02X)...\n", data[0]); break; default: fprintf(stderr, "DEBUG: Unknown side-channel command (%d) received " "from driver...\n", command); cupsSideChannelWrite(command, CUPS_SC_STATUS_NOT_IMPLEMENTED, NULL, 0, 1.0); fputs("DEBUG: Returned CUPS_SC_STATUS_NOT_IMPLEMENTED with no bytes...\n", stderr); break; } } while (!g.sidechannel_thread_stop); pthread_mutex_lock(&g.sidechannel_thread_mutex); g.sidechannel_thread_done = 1; pthread_cond_signal(&g.sidechannel_thread_cond); pthread_mutex_unlock(&g.sidechannel_thread_mutex); return NULL; } #pragma mark - /* * 'iterate_printers()' - Iterate over all the printers. */ static void iterate_printers(iterator_callback_t callBack, void *userdata) { Iterating = 1; iterator_reference_t reference = { callBack, userdata, true }; IONotificationPortRef addNotification = IONotificationPortCreate(kIOMasterPortDefault); int printingClass = kUSBPrintingClass; int printingSubclass = kUSBPrintingSubclass; CFNumberRef interfaceClass = CFNumberCreate(kCFAllocatorDefault, kCFNumberIntType, &printingClass); CFNumberRef interfaceSubClass = CFNumberCreate(kCFAllocatorDefault, kCFNumberIntType, &printingSubclass); CFMutableDictionaryRef usbPrinterMatchDictionary = IOServiceMatching(kIOUSBInterfaceClassName); CFDictionaryAddValue(usbPrinterMatchDictionary, CFSTR("bInterfaceClass"), interfaceClass); CFDictionaryAddValue(usbPrinterMatchDictionary, CFSTR("bInterfaceSubClass"), interfaceSubClass); CFRelease(interfaceClass); CFRelease(interfaceSubClass); io_iterator_t add_iterator = IO_OBJECT_NULL; IOServiceAddMatchingNotification(addNotification, kIOMatchedNotification, usbPrinterMatchDictionary, &device_added, &reference, &add_iterator); if (add_iterator != IO_OBJECT_NULL) { device_added (&reference, add_iterator); if (reference.keepRunning) { CFRunLoopAddSource(CFRunLoopGetCurrent(), IONotificationPortGetRunLoopSource(addNotification), kCFRunLoopDefaultMode); CFRunLoopRun(); } IOObjectRelease(add_iterator); } Iterating = 0; } /* * 'device_added()' - Device added notifier. */ static void device_added(void *userdata, io_iterator_t iterator) { iterator_reference_t *reference = userdata; io_service_t intf; while (reference->keepRunning && (intf = IOIteratorNext(iterator)) != 0x0) { printer_interface_t printerIntf = usb_printer_interface_interface(intf); if (printerIntf != NULL) { UInt8 intfClass = 0, intfSubClass = 0; (*printerIntf)->GetInterfaceClass(printerIntf, &intfClass); (*printerIntf)->GetInterfaceSubClass(printerIntf, &intfSubClass); if (intfClass == kUSBPrintingInterfaceClass && intfSubClass == kUSBPrintingSubclass) reference->keepRunning = reference->callback(intf, printerIntf, userdata); (*printerIntf)->Release(printerIntf); } IOObjectRelease(intf); } if (reference->keepRunning && reference->callback) reference->keepRunning = reference->callback(IO_OBJECT_NULL, NULL, reference->userdata); if (!reference->keepRunning) CFRunLoopStop(CFRunLoopGetCurrent()); } /* * 'list_device_cb()' - list_device iterator callback. */ static Boolean list_device_cb(io_service_t obj, printer_interface_t printerIntf, void *refcon) { (void)refcon; if (obj != IO_OBJECT_NULL) { CFStringRef deviceIDString = NULL; CFStringRef make = NULL; CFStringRef model = NULL; CFStringRef serial = NULL; UInt32 intfLocation; deviceIDString = copy_printer_interface_deviceid(printerIntf, 0); if (deviceIDString == NULL) goto list_device_done; make = deviceIDCopyManufacturer(deviceIDString); model = deviceIDCopyModel(deviceIDString); serial = deviceIDCopySerialNumber(deviceIDString); char uristr[1024], makestr[1024], modelstr[1024], serialstr[1024]; char optionsstr[1024], idstr[1024], make_modelstr[1024]; CFStringGetCString(deviceIDString, idstr, sizeof(idstr), kCFStringEncodingUTF8); backendGetMakeModel(idstr, make_modelstr, sizeof(make_modelstr)); modelstr[0] = '/'; if (make == NULL || !CFStringGetCString(make, makestr, sizeof(makestr), kCFStringEncodingUTF8)) strlcpy(makestr, "Unknown", sizeof(makestr)); if (model == NULL || !CFStringGetCString(model, &modelstr[1], sizeof(modelstr)-1, kCFStringEncodingUTF8)) strlcpy(modelstr + 1, "Printer", sizeof(modelstr) - 1); optionsstr[0] = '\0'; if (serial != NULL && CFStringGetCString(serial, serialstr, sizeof(serialstr), kCFStringEncodingUTF8)) snprintf(optionsstr, sizeof(optionsstr), "?serial=%s", serialstr); else if ((*printerIntf)->GetLocationID(printerIntf, &intfLocation) == kIOReturnSuccess) snprintf(optionsstr, sizeof(optionsstr), "?location=%x", (unsigned)intfLocation); httpAssembleURI(HTTP_URI_CODING_ALL, uristr, sizeof(uristr), "usb", NULL, makestr, 0, modelstr); strlcat(uristr, optionsstr, sizeof(uristr)); cupsBackendReport("direct", uristr, make_modelstr, make_modelstr, idstr, NULL); list_device_done: if (make != NULL) CFRelease(make); if (model != NULL) CFRelease(model); if (serial != NULL) CFRelease(serial); } return obj != IO_OBJECT_NULL; } /* * 'find_device_cb()' - print_device iterator callback. */ static Boolean find_device_cb(io_service_t obj, printer_interface_t printerIntf, void *refcon) { (void)refcon; Boolean keepLooking = true; if (obj != IO_OBJECT_NULL) { CFStringRef deviceIDString = NULL; CFStringRef make = NULL; CFStringRef model = NULL; CFStringRef serial = NULL; deviceIDString = copy_printer_interface_deviceid(printerIntf, 0); if (deviceIDString == NULL) goto find_device_done; make = deviceIDCopyManufacturer(deviceIDString); model = deviceIDCopyModel(deviceIDString); serial = deviceIDCopySerialNumber(deviceIDString); if (make && CFStringCompare(make, g.make, kCFCompareCaseInsensitive) == kCFCompareEqualTo) { if (model && CFStringCompare(model, g.model, kCFCompareCaseInsensitive) == kCFCompareEqualTo) { UInt8 intfAltSetting = 0, intfNumber = 0, intfProtocol = 0; UInt32 intfLocation = 0; (*printerIntf)->GetInterfaceProtocol(printerIntf, &intfProtocol); (*printerIntf)->GetAlternateSetting(printerIntf, &intfAltSetting); (*printerIntf)->GetInterfaceNumber(printerIntf, &intfNumber); (*printerIntf)->GetLocationID(printerIntf, &intfLocation); if (intfProtocol == kUSBPrintingProtocolIPP) return keepLooking; if (g.serial != NULL && CFStringGetLength(g.serial) > 0) { if (serial != NULL && CFStringCompare(serial, g.serial, kCFCompareCaseInsensitive) == kCFCompareEqualTo) { g.interfaceProtocol = intfProtocol; g.location = intfLocation; g.alternateSetting = intfAltSetting; g.printer_obj = obj; IOObjectRetain(obj); keepLooking = false; } } else { if (g.printer_obj != 0) IOObjectRelease(g.printer_obj); if (g.location == 0 || g.location == intfLocation) keepLooking = false; g.location = intfLocation; g.alternateSetting = intfAltSetting; g.interfaceProtocol = intfProtocol; g.printer_obj = obj; IOObjectRetain(obj); } if (!keepLooking) g.interfaceNum = intfNumber; } } find_device_done: if (deviceIDString != NULL) CFRelease(deviceIDString); if (make != NULL) CFRelease(make); if (model != NULL) CFRelease(model); if (serial != NULL) CFRelease(serial); } else { keepLooking = (g.printer_obj == 0 && g.interfaceProtocol != kUSBPrintingProtocolIPP); if (obj == IO_OBJECT_NULL && keepLooking) { CFRunLoopTimerContext context = { 0, refcon, NULL, NULL, NULL }; CFRunLoopTimerRef timer = CFRunLoopTimerCreate(NULL, CFAbsoluteTimeGetCurrent() + 1.0, 10, 0x0, 0x0, status_timer_cb, &context); if (timer != NULL) { CFRunLoopAddTimer(CFRunLoopGetCurrent(), timer, kCFRunLoopDefaultMode); g.status_timer = timer; } } } if (!keepLooking && g.status_timer != NULL) { fputs("STATE: -offline-report\n", stderr); _cupsLangPrintFilter(stderr, "INFO", _("The printer is now online.")); CFRunLoopRemoveTimer(CFRunLoopGetCurrent(), g.status_timer, kCFRunLoopDefaultMode); CFRelease(g.status_timer); g.status_timer = NULL; } return keepLooking; } static CFStringRef deviceIDCopySerialNumber(CFStringRef deviceID) { CFStringRef serialKeys[] = { CFSTR("SN:"), CFSTR("SERN:"), NULL }; return copy_value_for_key(deviceID, serialKeys); } static CFStringRef deviceIDCopyModel(CFStringRef deviceID) { CFStringRef modelKeys[] = { CFSTR("MDL:"), CFSTR("MODEL:"), NULL }; return copy_value_for_key(deviceID, modelKeys); } static CFStringRef deviceIDCopyManufacturer(CFStringRef deviceID) { CFStringRef makeKeys[] = { CFSTR("MFG:"), CFSTR("MANUFACTURER:"), NULL }; return copy_value_for_key(deviceID, makeKeys); } /* * 'status_timer_cb()' - Status timer callback. */ static void status_timer_cb(CFRunLoopTimerRef timer, void *info) { (void)timer; (void)info; fputs("STATE: +offline-report\n", stderr); _cupsLangPrintFilter(stderr, "INFO", _("The printer is offline.")); if (getenv("CLASS") != NULL) { /* * If the CLASS environment variable is set, the job was submitted * to a class and not to a specific queue. In this case, we want * to abort immediately so that the job can be requeued on the next * available printer in the class. * * Sleep 5 seconds to keep the job from requeuing too rapidly... */ sleep(5); exit(CUPS_BACKEND_FAILED); } } #pragma mark - /* * 'load_classdriver()' - Load a classdriver. */ static kern_return_t load_classdriver(CFStringRef driverPath, printer_interface_t interface, classdriver_t ***printerDriver) { kern_return_t kr = kUSBPrinterClassDeviceNotOpen; classdriver_t **driver = NULL; CFStringRef bundle = driverPath ? driverPath : kUSBGenericTOPrinterClassDriver; char bundlestr[1024]; /* Bundle path */ CFURLRef url; /* URL for driver */ CFPlugInRef plugin = NULL; /* Plug-in address */ CFStringGetCString(bundle, bundlestr, sizeof(bundlestr), kCFStringEncodingUTF8); /* * Validate permissions for the class driver... */ _cups_fc_result_t result = _cupsFileCheck(bundlestr, _CUPS_FILE_CHECK_DIRECTORY, 1, Iterating ? NULL : _cupsFileCheckFilter, NULL); if (result && driverPath) return (load_classdriver(NULL, interface, printerDriver)); else if (result) return (kr); /* * Try loading the class driver... */ url = CFURLCreateWithFileSystemPath(NULL, bundle, kCFURLPOSIXPathStyle, true); if (url) { plugin = CFPlugInCreate(NULL, url); CFRelease(url); } else plugin = NULL; if (plugin) { CFArrayRef factories = CFPlugInFindFactoriesForPlugInTypeInPlugIn(kUSBPrinterClassTypeID, plugin); if (factories != NULL && CFArrayGetCount(factories) > 0) { CFUUIDRef factoryID = CFArrayGetValueAtIndex(factories, 0); IUnknownVTbl **iunknown = CFPlugInInstanceCreate(NULL, factoryID, kUSBPrinterClassTypeID); if (iunknown != NULL) { kr = (*iunknown)->QueryInterface(iunknown, CFUUIDGetUUIDBytes(kUSBPrinterClassInterfaceID), (LPVOID *)&driver); if (kr == kIOReturnSuccess && driver != NULL) { classdriver_t **genericDriver = NULL; if (driverPath != NULL && CFStringCompare(driverPath, kUSBGenericTOPrinterClassDriver, 0) != kCFCompareEqualTo) kr = load_classdriver(NULL, interface, &genericDriver); if (kr == kIOReturnSuccess) { (*driver)->interface = interface; (*driver)->Initialize(driver, genericDriver); (*driver)->plugin = plugin; (*driver)->interface = interface; *printerDriver = driver; } } (*iunknown)->Release(iunknown); } CFRelease(factories); } } fprintf(stderr, "DEBUG: load_classdriver(%s) (kr:0x%08x)\n", bundlestr, (int)kr); return (kr); } /* * 'unload_classdriver()' - Unload a classdriver. */ static kern_return_t unload_classdriver(classdriver_t ***classdriver) { if (*classdriver != NULL) { (**classdriver)->Release(*classdriver); *classdriver = NULL; } return kIOReturnSuccess; } /* * 'load_printerdriver()' - Load vendor's classdriver. * * If driverBundlePath is not NULL on return it is the callers responsbility to release it! */ static kern_return_t load_printerdriver(CFStringRef *driverBundlePath) { IOCFPlugInInterface **iodev = NULL; SInt32 score; kern_return_t kr; printer_interface_t interface; HRESULT res; kr = IOCreatePlugInInterfaceForService(g.printer_obj, kIOUSBInterfaceUserClientTypeID, kIOCFPlugInInterfaceID, &iodev, &score); if (kr == kIOReturnSuccess) { if ((res = (*iodev)->QueryInterface(iodev, USB_INTERFACE_KIND, (LPVOID *) &interface)) == noErr) { *driverBundlePath = IORegistryEntryCreateCFProperty(g.printer_obj, kUSBClassDriverProperty, NULL, kNilOptions); g.use_generic_class_driver = (*driverBundlePath == NULL || (CFStringCompare(*driverBundlePath, kUSBGenericTOPrinterClassDriver, 0x0) == kCFCompareEqualTo)); kr = load_classdriver(*driverBundlePath, interface, &g.classdriver); if (kr != kIOReturnSuccess) (*interface)->Release(interface); } IODestroyPlugInInterface(iodev); } return kr; } static printer_interface_t usb_printer_interface_interface(io_service_t usbClass) { printer_interface_t intf = NULL; IOCFPlugInInterface **plugin = NULL; SInt32 score; int kr = IOCreatePlugInInterfaceForService(usbClass, kIOUSBInterfaceUserClientTypeID, kIOCFPlugInInterfaceID, &plugin, &score); if (kr == kIOReturnSuccess) { (*plugin)->QueryInterface(plugin, USB_INTERFACE_KIND, (LPVOID *)&intf); IODestroyPlugInInterface(plugin); } return intf; } static CFStringRef copy_printer_interface_deviceid(printer_interface_t printer, UInt8 alternateSetting) { // I have tried to make this function as neat as I can, but the possibility of needing to resend // a request to get the entire string makes it hideous... // // We package the job of sending a request up into the block (^sendRequest), which takes the size // it should allocate for the message buffer. It frees the current buffer if one is set and // allocates one of the specified size, then performs the request. We can then easily retry by // calling the block again if we fail to get the whole string the first time around. #define kUSBPrintClassGetDeviceID 0 #define kDefaultNoDataTimeout 5000L #define pack_device_id_wIndex(intf, alt) ((UInt16)((((UInt16)(intf)) << 8) | ((UInt8)(alt)))) if (printer == NULL) return NULL; IOReturn err = kIOReturnError; UInt8 configurationIndex = 0; UInt8 interfaceNumber = 0; size_t bufferLength = 256; CFStringRef ret = NULL; if ((*printer)->GetConfigurationValue( printer, &configurationIndex) == kIOReturnSuccess && (*printer)->GetInterfaceNumber( printer, &interfaceNumber) == kIOReturnSuccess) { __block IOUSBDevRequestTO request; IOReturn (^sendRequest)(size_t) = ^ (size_t size) { if (request.pData) { free(request.pData); request.wLength = 0; request.pData = NULL; } IOReturn berr = kIOReturnError; char *buffer = malloc(size); if (buffer == NULL) return kIOReturnNoMemory; request.wLength = HostToUSBWord(size); request.pData = buffer; berr = (*printer)->ControlRequestTO(printer, (UInt8)0, &request); return berr; }; /* This request takes the 0 based configuration index. IOKit returns a 1 based configuration index */ configurationIndex -= 1; bzero(&request, sizeof(request)); request.bmRequestType = USBmakebmRequestType(kUSBIn, kUSBClass, kUSBInterface); request.bRequest = kUSBPrintClassGetDeviceID; request.wValue = HostToUSBWord(configurationIndex); request.wIndex = HostToUSBWord(pack_device_id_wIndex(interfaceNumber, alternateSetting)); request.noDataTimeout = kDefaultNoDataTimeout; request.completionTimeout = 0; // Copying behavior from Generic Class Driver err = sendRequest(bufferLength); if (err == kIOReturnSuccess && request.wLenDone > 1) { UInt16 actualLength = OSSwapBigToHostInt16(*((UInt16 *)request.pData)); if (actualLength > 2 && actualLength <= bufferLength - 2) { ret = CFStringCreateWithBytes(NULL, (const UInt8 *) &request.pData[2], actualLength - 2, kCFStringEncodingUTF8, false); } else if (actualLength > 2) { err = sendRequest(actualLength); if (err == kIOReturnSuccess && request.wLenDone > 0) { actualLength = OSSwapBigToHostInt16(*((UInt16 *)request.pData)); ret = CFStringCreateWithBytes(NULL, (const UInt8 *) &request.pData[2], actualLength - 2, kCFStringEncodingUTF8, false); } } } if (request.pData) free(request.pData); } CFStringRef manufacturer = deviceIDCopyManufacturer(ret); CFStringRef model = deviceIDCopyModel(ret); CFStringRef serial = deviceIDCopySerialNumber(ret); if (manufacturer == NULL || serial == NULL || model == NULL) { IOUSBDevRequestTO request; IOUSBDeviceDescriptor desc; bzero(&request, sizeof(request)); request.bmRequestType = USBmakebmRequestType( kUSBIn, kUSBStandard, kUSBDevice ); request.bRequest = kUSBRqGetDescriptor; request.wValue = kUSBDeviceDesc << 8; request.wIndex = 0; request.wLength = sizeof(desc); request.pData = &desc; request.completionTimeout = 0; request.noDataTimeout = 60L; err = (*printer)->ControlRequestTO(printer, 0, &request); if (err == kIOReturnSuccess) { CFMutableStringRef extras = CFStringCreateMutable(NULL, 0); if (manufacturer == NULL) { manufacturer = copy_printer_interface_indexed_description(printer, desc.iManufacturer, kUSBLanguageEnglish); if (manufacturer && CFStringGetLength(manufacturer) > 0) CFStringAppendFormat(extras, NULL, CFSTR("MFG:%@;"), manufacturer); } if (model == NULL) { model = copy_printer_interface_indexed_description(printer, desc.iProduct, kUSBLanguageEnglish); if (model && CFStringGetLength(model) > 0) CFStringAppendFormat(extras, NULL, CFSTR("MDL:%@;"), model); } if (serial == NULL && desc.iSerialNumber != 0) { serial = copy_printer_interface_indexed_description(printer, desc.iSerialNumber, kUSBLanguageEnglish); if (serial && CFStringGetLength(serial) > 0) CFStringAppendFormat(extras, NULL, CFSTR("SERN:%@;"), serial); } if (ret != NULL) { CFStringAppend(extras, ret); CFRelease(ret); ret = extras; } else { ret = extras; } } } if (ret != NULL) { /* Remove special characters from the serial number */ CFRange range = (serial != NULL ? CFStringFind(serial, CFSTR("+"), 0) : CFRangeMake(0, 0)); if (range.length == 1) { range = CFStringFind(ret, serial, 0); CFMutableStringRef deviceIDString = CFStringCreateMutableCopy(NULL, 0, ret); CFRelease(ret); ret = deviceIDString; CFStringFindAndReplace(deviceIDString, CFSTR("+"), CFSTR(""), range, 0); } } if (manufacturer != NULL) CFRelease(manufacturer); if (model != NULL) CFRelease(model); if (serial != NULL) CFRelease(serial); if (ret != NULL && CFStringGetLength(ret) == 0) { CFRelease(ret); return NULL; } return ret; } static CFStringRef copy_printer_interface_indexed_description(printer_interface_t printer, UInt8 index, UInt16 language) { IOReturn err; UInt8 description[256]; // Max possible descriptor length IOUSBDevRequestTO request; bzero(description, 2); request.bmRequestType = USBmakebmRequestType(kUSBIn, kUSBStandard, kUSBDevice); request.bRequest = kUSBRqGetDescriptor; request.wValue = (kUSBStringDesc << 8) | index; request.wIndex = language; request.wLength = 2; request.pData = &description; request.completionTimeout = 0; request.noDataTimeout = 60L; err = (*printer)->ControlRequestTO(printer, 0, &request); if (err != kIOReturnSuccess && err != kIOReturnOverrun) { bzero(description, request.wLength); // Let's try again full length. Here's why: // On USB 2.0 controllers, we will not get an overrun error. We just get a "babble" error // and no valid data. So, if we ask for the max size, we will either get it, or we'll get an underrun. // It looks like we get it w/out an underrun request.bmRequestType = USBmakebmRequestType(kUSBIn, kUSBStandard, kUSBDevice); request.bRequest = kUSBRqGetDescriptor; request.wValue = (kUSBStringDesc << 8) | index; request.wIndex = language; request.wLength = sizeof description; request.pData = &description; request.completionTimeout = 0; request.noDataTimeout = 60L; err = (*printer)->ControlRequestTO(printer, 0, &request); if (err != kIOReturnSuccess && err != kIOReturnUnderrun) return NULL; } unsigned int length = description[0]; if (length == 0) return CFStringCreateWithCString(NULL, "", kCFStringEncodingUTF8); if (description[1] != kUSBStringDesc) return NULL; request.bmRequestType = USBmakebmRequestType(kUSBIn, kUSBStandard, kUSBDevice); request.bRequest = kUSBRqGetDescriptor; request.wValue = (kUSBStringDesc << 8) | index; request.wIndex = language; bzero(description, length); request.wLength = (UInt16)length; request.pData = &description; request.completionTimeout = 0; request.noDataTimeout = 60L; err = (*printer)->ControlRequestTO(printer, 0, &request); if (err != kIOReturnSuccess) return NULL; if (description[1] != kUSBStringDesc) return NULL; if ((description[0] & 1) != 0) description[0] &= 0xfe; char buffer[258] = {}; unsigned int maxLength = sizeof buffer; if (description[0] > 1) { length = (description[0]-2)/2; if (length > maxLength - 1) length = maxLength -1; for (unsigned i = 0; i < length; i++) buffer[i] = (char) description[2*i+2]; buffer[length] = 0; } return CFStringCreateWithCString(NULL, buffer, kCFStringEncodingUTF8); } /* * 'registry_open()' - Open a connection to the printer. */ static kern_return_t registry_open(CFStringRef *driverBundlePath) { g.bidi_flag = 0; /* 0=unidirectional */ kern_return_t kr = load_printerdriver(driverBundlePath); if (kr != kIOReturnSuccess) kr = -2; if (g.classdriver != NULL) { (*g.classdriver)->interfaceNumber = g.interfaceNum; kr = (*g.classdriver)->Open(g.classdriver, g.location, kUSBPrintingProtocolBidirectional); if (kr != kIOReturnSuccess || (*g.classdriver)->interface == NULL) { kr = (*g.classdriver)->Open(g.classdriver, g.location, kUSBPrintingProtocolUnidirectional); if (kr == kIOReturnSuccess) { if ((*g.classdriver)->interface == NULL) { (*g.classdriver)->Close(g.classdriver); kr = -1; } } } else g.bidi_flag = 1; /* 1=bidirectional */ } if (kr != kIOReturnSuccess) unload_classdriver(&g.classdriver); return kr; } /* * 'registry_close()' - Close the connection to the printer. */ static kern_return_t registry_close(void) { if (g.classdriver != NULL) (*g.classdriver)->Close(g.classdriver); unload_classdriver(&g.classdriver); return kIOReturnSuccess; } #pragma mark - /* * 'copy_value_for_key()' - Copy value string associated with a key. */ static CFStringRef copy_value_for_key(CFStringRef deviceID, CFStringRef *keys) { CFStringRef value = NULL; CFArrayRef kvPairs = deviceID != NULL ? CFStringCreateArrayBySeparatingStrings(NULL, deviceID, CFSTR(";")) : NULL; CFIndex max = kvPairs != NULL ? CFArrayGetCount(kvPairs) : 0; CFIndex idx = 0; while (idx < max && value == NULL) { CFStringRef kvpair = CFArrayGetValueAtIndex(kvPairs, idx); CFIndex idxx = 0; while (keys[idxx] != NULL && value == NULL) { CFRange range = CFStringFind(kvpair, keys[idxx], kCFCompareCaseInsensitive); if (range.length != -1) { if (range.location != 0) { CFMutableStringRef theString = CFStringCreateMutableCopy(NULL, 0, kvpair); CFStringTrimWhitespace(theString); range = CFStringFind(theString, keys[idxx], kCFCompareCaseInsensitive); if (range.location == 0) value = CFStringCreateWithSubstring(NULL, theString, CFRangeMake(range.length, CFStringGetLength(theString) - range.length)); CFRelease(theString); } else { CFStringRef theString = CFStringCreateWithSubstring(NULL, kvpair, CFRangeMake(range.length, CFStringGetLength(kvpair) - range.length)); CFMutableStringRef theString2 = CFStringCreateMutableCopy(NULL, 0, theString); CFRelease(theString); CFStringTrimWhitespace(theString2); value = theString2; } } idxx++; } idx++; } if (kvPairs != NULL) CFRelease(kvPairs); return value; } /* * 'cfstr_create_trim()' - Create CFString and trim whitespace characters. */ CFStringRef cfstr_create_trim(const char *cstr) { CFStringRef cfstr; CFMutableStringRef cfmutablestr = NULL; if ((cfstr = CFStringCreateWithCString(NULL, cstr, kCFStringEncodingUTF8)) != NULL) { if ((cfmutablestr = CFStringCreateMutableCopy(NULL, 1024, cfstr)) != NULL) CFStringTrimWhitespace(cfmutablestr); CFRelease(cfstr); } return (CFStringRef) cfmutablestr; } #pragma mark - /* * 'parse_options()' - Parse URI options. */ static void parse_options(char *options, char *serial, int serial_size, UInt32 *location, Boolean *wait_eof) { char sep, /* Separator character */ *name, /* Name of option */ *value; /* Value of option */ if (serial) *serial = '\0'; if (location) *location = 0; if (!options) return; while (*options) { /* * Get the name... */ name = options; while (*options && *options != '=' && *options != '+' && *options != '&') options ++; if ((sep = *options) != '\0') *options++ = '\0'; if (sep == '=') { /* * Get the value... */ value = options; while (*options && *options != '+' && *options != '&') options ++; if (*options) *options++ = '\0'; } else value = (char *)""; /* * Process the option... */ if (!_cups_strcasecmp(name, "waiteof")) { if (!_cups_strcasecmp(value, "on") || !_cups_strcasecmp(value, "yes") || !_cups_strcasecmp(value, "true")) *wait_eof = true; else if (!_cups_strcasecmp(value, "off") || !_cups_strcasecmp(value, "no") || !_cups_strcasecmp(value, "false")) *wait_eof = false; else _cupsLangPrintFilter(stderr, "WARNING", _("Boolean expected for waiteof option \"%s\"."), value); } else if (!_cups_strcasecmp(name, "serial")) strlcpy(serial, value, (size_t)serial_size); else if (!_cups_strcasecmp(name, "location") && location) *location = (UInt32)strtoul(value, NULL, 16); } } /*! * @function setup_cfLanguage * @abstract Convert the contents of the CUPS 'APPLE_LANGUAGE' environment * variable into a one element CF array of languages. * * @discussion Each submitted job comes with a natural language. CUPS passes * that language in an environment variable. We take that language * and jam it into the AppleLanguages array so that CF will use * it when reading localized resources. We need to do this before * any CF code reads and caches the languages array, so this function * should be called early in main() */ static void setup_cfLanguage(void) { CFStringRef lang[1] = {NULL}; CFArrayRef langArray = NULL; const char *requestedLang = NULL; if ((requestedLang = getenv("APPLE_LANGUAGE")) == NULL) requestedLang = getenv("LANG"); if (requestedLang != NULL) { lang[0] = CFStringCreateWithCString(kCFAllocatorDefault, requestedLang, kCFStringEncodingUTF8); langArray = CFArrayCreate(kCFAllocatorDefault, (const void **)lang, sizeof(lang) / sizeof(lang[0]), &kCFTypeArrayCallBacks); CFPreferencesSetValue(CFSTR("AppleLanguages"), langArray, kCFPreferencesCurrentApplication, kCFPreferencesAnyUser, kCFPreferencesAnyHost); fprintf(stderr, "DEBUG: usb: AppleLanguages=\"%s\"\n", requestedLang); CFRelease(lang[0]); CFRelease(langArray); } else fputs("DEBUG: usb: LANG and APPLE_LANGUAGE environment variables missing.\n", stderr); } #pragma mark - #if defined(__i386__) || defined(__x86_64__) /*! * @function run_legacy_backend * * @abstract Starts child backend process running as a ppc or i386 executable. * * @result Never returns; always calls exit(). * * @discussion */ static void run_legacy_backend(int argc, char *argv[], int fd) { int i; int exitstatus = 0; int childstatus; pid_t waitpid_status; char *my_argv[32]; char *usb_legacy_status; /* * If we're running as x86_64 or i386 and couldn't load the class driver * (because it's ppc or i386), then try to re-exec ourselves in ppc or i386 * mode to try again. If we don't have a ppc or i386 architecture we may be * running with the same architecture again so guard against this by setting * and testing an environment variable... */ # ifdef __x86_64__ usb_legacy_status = getenv("USB_I386_STATUS"); # else usb_legacy_status = getenv("USB_PPC_STATUS"); # endif /* __x86_64__ */ if (!usb_legacy_status) { /* * Setup a SIGTERM handler then block it before forking... */ int err; /* posix_spawn result */ struct sigaction action; /* POSIX signal action */ sigset_t newmask, /* New signal mask */ oldmask; /* Old signal mask */ char usbpath[1024]; /* Path to USB backend */ const char *cups_serverbin;/* Path to CUPS binaries */ memset(&action, 0, sizeof(action)); sigaddset(&action.sa_mask, SIGTERM); action.sa_handler = sigterm_handler; sigaction(SIGTERM, &action, NULL); sigemptyset(&newmask); sigaddset(&newmask, SIGTERM); sigprocmask(SIG_BLOCK, &newmask, &oldmask); /* * Set the environment variable... */ # ifdef __x86_64__ setenv("USB_I386_STATUS", "1", false); # else setenv("USB_PPC_STATUS", "1", false); # endif /* __x86_64__ */ /* * Tell the kernel to use the specified CPU architecture... */ # ifdef __x86_64__ cpu_type_t cpu = CPU_TYPE_I386; # else cpu_type_t cpu = CPU_TYPE_POWERPC; # endif /* __x86_64__ */ size_t ocount = 1; posix_spawnattr_t attrs; if (!posix_spawnattr_init(&attrs)) { posix_spawnattr_setsigdefault(&attrs, &oldmask); if (posix_spawnattr_setbinpref_np(&attrs, 1, &cpu, &ocount) || ocount != 1) { # ifdef __x86_64__ perror("DEBUG: Unable to set binary preference to i386"); # else perror("DEBUG: Unable to set binary preference to ppc"); # endif /* __x86_64__ */ _cupsLangPrintFilter(stderr, "ERROR", _("Unable to use legacy USB class driver.")); exit(CUPS_BACKEND_STOP); } } /* * Set up the arguments and call posix_spawn... */ if ((cups_serverbin = getenv("CUPS_SERVERBIN")) == NULL) cups_serverbin = CUPS_SERVERBIN; snprintf(usbpath, sizeof(usbpath), "%s/backend/usb", cups_serverbin); for (i = 0; i < argc && i < (int)(sizeof(my_argv) / sizeof(my_argv[0])) - 1; i ++) my_argv[i] = argv[i]; my_argv[i] = NULL; if ((err = posix_spawn(&child_pid, usbpath, NULL, &attrs, my_argv, environ)) != 0) { fprintf(stderr, "DEBUG: Unable to exec %s: %s\n", usbpath, strerror(err)); _cupsLangPrintFilter(stderr, "ERROR", _("Unable to use legacy USB class driver.")); exit(CUPS_BACKEND_STOP); } /* * Unblock signals... */ sigprocmask(SIG_SETMASK, &oldmask, NULL); /* * Close the fds we won't be using then wait for the child backend to exit. */ close(fd); close(1); fprintf(stderr, "DEBUG: Started usb(legacy) backend (PID %d)\n", (int)child_pid); while ((waitpid_status = waitpid(child_pid, &childstatus, 0)) == (pid_t)-1 && errno == EINTR) usleep(1000); if (WIFSIGNALED(childstatus)) { exitstatus = CUPS_BACKEND_STOP; fprintf(stderr, "DEBUG: usb(legacy) backend %d crashed on signal %d\n", child_pid, WTERMSIG(childstatus)); } else { if ((exitstatus = WEXITSTATUS(childstatus)) != 0) fprintf(stderr, "DEBUG: usb(legacy) backend %d stopped with status %d\n", child_pid, exitstatus); else fprintf(stderr, "DEBUG: usb(legacy) backend %d exited with no errors\n", child_pid); } } else { fputs("DEBUG: usb(legacy) backend running native again\n", stderr); exitstatus = CUPS_BACKEND_STOP; } exit(exitstatus); } #endif /* __i386__ || __x86_64__ */ /* * 'sigterm_handler()' - SIGTERM handler. */ static void sigterm_handler(int sig) /* I - Signal */ { #if defined(__i386__) || defined(__x86_64__) /* * If we started a child process pass the signal on to it... */ if (child_pid) { /* * If we started a child process pass the signal on to it... */ int status; kill(child_pid, sig); while (waitpid(child_pid, &status, 0) < 0 && errno == EINTR); if (WIFEXITED(status)) _exit(WEXITSTATUS(status)); else if (status == SIGTERM || status == SIGKILL) _exit(0); else { write(2, "DEBUG: Child crashed.\n", 22); _exit(CUPS_BACKEND_STOP); } } #endif /* __i386__ || __x86_64__ */ } /* * 'sigquit_handler()' - SIGQUIT handler. */ static void sigquit_handler(int sig, siginfo_t *si, void *unused) { char *path; char pathbuf[PROC_PIDPATHINFO_MAXSIZE]; static char msgbuf[256] = ""; (void)sig; (void)unused; if (proc_pidpath(si->si_pid, pathbuf, sizeof(pathbuf)) > 0 && (path = basename(pathbuf)) != NULL) snprintf(msgbuf, sizeof(msgbuf), "SIGQUIT sent by %s(%d)", path, (int)si->si_pid); else snprintf(msgbuf, sizeof(msgbuf), "SIGQUIT sent by PID %d", (int)si->si_pid); CRSetCrashLogMessage(msgbuf); abort(); } #ifdef PARSE_PS_ERRORS /* * 'next_line()' - Find the next line in a buffer. */ static const char *next_line (const char *buffer) { const char *cptr, *lptr = NULL; for (cptr = buffer; *cptr && lptr == NULL; cptr++) if (*cptr == '\n' || *cptr == '\r') lptr = cptr; return lptr; } /* * 'parse_pserror()' - Scan the backchannel data for postscript errors. */ static void parse_pserror(char *sockBuffer, int len) { static char gErrorBuffer[1024] = ""; static char *gErrorBufferPtr = gErrorBuffer; static char *gErrorBufferEndPtr = gErrorBuffer + sizeof(gErrorBuffer); char *pCommentBegin, *pCommentEnd, *pLineEnd; char *logLevel; char logstr[1024]; int logstrlen; if (gErrorBufferPtr + len > gErrorBufferEndPtr - 1) gErrorBufferPtr = gErrorBuffer; if (len > sizeof(gErrorBuffer) - 1) len = sizeof(gErrorBuffer) - 1; memcpy(gErrorBufferPtr, (const void *)sockBuffer, len); gErrorBufferPtr += len; *(gErrorBufferPtr + 1) = '\0'; pLineEnd = (char *)next_line((const char *)gErrorBuffer); while (pLineEnd != NULL) { *pLineEnd++ = '\0'; pCommentBegin = strstr(gErrorBuffer,"%%["); pCommentEnd = strstr(gErrorBuffer, "]%%"); if (pCommentBegin != gErrorBuffer && pCommentEnd != NULL) { pCommentEnd += 3; /* Skip past "]%%" */ *pCommentEnd = '\0'; /* There's always room for the nul */ if (_cups_strncasecmp(pCommentBegin, "%%[ Error:", 10) == 0) logLevel = "DEBUG"; else if (_cups_strncasecmp(pCommentBegin, "%%[ Flushing", 12) == 0) logLevel = "DEBUG"; else logLevel = "INFO"; if ((logstrlen = snprintf(logstr, sizeof(logstr), "%s: %s\n", logLevel, pCommentBegin)) >= sizeof(logstr)) { /* If the string was trucnated make sure it has a linefeed before the nul */ logstrlen = sizeof(logstr) - 1; logstr[logstrlen - 1] = '\n'; } write(STDERR_FILENO, logstr, logstrlen); } /* move everything over... */ strlcpy(gErrorBuffer, pLineEnd, sizeof(gErrorBuffer)); gErrorBufferPtr = gErrorBuffer; pLineEnd = (char *)next_line((const char *)gErrorBuffer); } } #endif /* PARSE_PS_ERRORS */ /* * 'soft_reset()' - Send a soft reset to the device. */ static void soft_reset(void) { fd_set input_set; /* Input set for select() */ struct timeval tv; /* Time value */ char buffer[2048]; /* Buffer */ struct timespec cond_timeout; /* pthread condition timeout */ /* * Send an abort once a second until the I/O lock is released by the main thread... */ pthread_mutex_lock(&g.readwrite_lock_mutex); while (g.readwrite_lock) { (*g.classdriver)->Abort(g.classdriver); gettimeofday(&tv, NULL); cond_timeout.tv_sec = tv.tv_sec + 1; cond_timeout.tv_nsec = tv.tv_usec * 1000; while (g.readwrite_lock) { if (pthread_cond_timedwait(&g.readwrite_lock_cond, &g.readwrite_lock_mutex, &cond_timeout) != 0) break; } } g.readwrite_lock = 1; pthread_mutex_unlock(&g.readwrite_lock_mutex); /* * Flush bytes waiting on print_fd... */ g.print_bytes = 0; FD_ZERO(&input_set); FD_SET(g.print_fd, &input_set); tv.tv_sec = 0; tv.tv_usec = 0; while (select(g.print_fd+1, &input_set, NULL, NULL, &tv) > 0) if (read(g.print_fd, buffer, sizeof(buffer)) <= 0) break; /* * Send the reset... */ (*g.classdriver)->SoftReset(g.classdriver, DEFAULT_TIMEOUT); /* * Release the I/O lock... */ pthread_mutex_lock(&g.readwrite_lock_mutex); g.readwrite_lock = 0; pthread_cond_signal(&g.readwrite_lock_cond); pthread_mutex_unlock(&g.readwrite_lock_mutex); } /* * 'get_device_id()' - Return IEEE-1284 device ID. */ static void get_device_id(cups_sc_status_t *status, char *data, int *datalen) { CFStringRef deviceIDString = NULL; if (g.printer_obj != IO_OBJECT_NULL) { printer_interface_t printerIntf = usb_printer_interface_interface(g.printer_obj); if (printerIntf) { deviceIDString = copy_printer_interface_deviceid(printerIntf, g.alternateSetting); (*printerIntf)->Release(printerIntf); } } if (deviceIDString) { if (CFStringGetCString(deviceIDString, data, *datalen, kCFStringEncodingUTF8)) *datalen = (int)strlen(data); else *datalen = 0; CFRelease(deviceIDString); } else { *datalen = 0; } *status = CUPS_SC_STATUS_OK; }