//===- ARMErrataFix.cpp ---------------------------------------------------===// // // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. // See https://llvm.org/LICENSE.txt for license information. // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception // //===----------------------------------------------------------------------===// // This file implements Section Patching for the purpose of working around the // Cortex-a8 erratum 657417 "A 32bit branch instruction that spans 2 4K regions // can result in an incorrect instruction fetch or processor deadlock." The // erratum affects all but r1p7, r2p5, r2p6, r3p1 and r3p2 revisions of the // Cortex-A8. A high level description of the patching technique is given in // the opening comment of AArch64ErrataFix.cpp. //===----------------------------------------------------------------------===// #include "ARMErrataFix.h" #include "Config.h" #include "LinkerScript.h" #include "OutputSections.h" #include "Relocations.h" #include "Symbols.h" #include "SyntheticSections.h" #include "Target.h" #include "lld/Common/Memory.h" #include "lld/Common/Strings.h" #include "llvm/Support/Endian.h" #include "llvm/Support/raw_ostream.h" #include using namespace llvm; using namespace llvm::ELF; using namespace llvm::object; using namespace llvm::support; using namespace llvm::support::endian; using namespace lld; using namespace lld::elf; // The documented title for Erratum 657417 is: // "A 32bit branch instruction that spans two 4K regions can result in an // incorrect instruction fetch or processor deadlock". Graphically using a // 32-bit B.w instruction encoded as a pair of halfwords 0xf7fe 0xbfff // xxxxxx000 // Memory region 1 start // target: // ... // xxxxxxffe f7fe // First halfword of branch to target: // xxxxxx000 // Memory region 2 start // xxxxxx002 bfff // Second halfword of branch to target: // // The specific trigger conditions that can be detected at link time are: // - There is a 32-bit Thumb-2 branch instruction with an address of the form // xxxxxxFFE. The first 2 bytes of the instruction are in 4KiB region 1, the // second 2 bytes are in region 2. // - The branch instruction is one of BLX, BL, B.w BCC.w // - The instruction preceding the branch is a 32-bit non-branch instruction. // - The target of the branch is in region 1. // // The linker mitigation for the fix is to redirect any branch that meets the // erratum conditions to a patch section containing a branch to the target. // // As adding patch sections may move branches onto region boundaries the patch // must iterate until no more patches are added. // // Example, before: // 00000FFA func: NOP.w // 32-bit Thumb function // 00000FFE B.W func // 32-bit branch spanning 2 regions, dest in 1st. // Example, after: // 00000FFA func: NOP.w // 32-bit Thumb function // 00000FFE B.w __CortexA8657417_00000FFE // 00001002 2 - bytes padding // 00001004 __CortexA8657417_00000FFE: B.w func class elf::Patch657417Section : public SyntheticSection { public: Patch657417Section(InputSection *p, uint64_t off, uint32_t instr, bool isARM); void writeTo(uint8_t *buf) override; size_t getSize() const override { return 4; } // Get the virtual address of the branch instruction at patcheeOffset. uint64_t getBranchAddr() const; static bool classof(const SectionBase *d) { return d->kind() == InputSectionBase::Synthetic && d->name ==".text.patch"; } // The Section we are patching. const InputSection *patchee; // The offset of the instruction in the Patchee section we are patching. uint64_t patcheeOffset; // A label for the start of the Patch that we can use as a relocation target. Symbol *patchSym; // A decoding of the branch instruction at patcheeOffset. uint32_t instr; // True If the patch is to be written in ARM state, otherwise the patch will // be written in Thumb state. bool isARM; }; // Return true if the half-word, when taken as the first of a pair of halfwords // is the first half of a 32-bit instruction. // Reference from ARM Architecture Reference Manual ARMv7-A and ARMv7-R edition // section A6.3: 32-bit Thumb instruction encoding // | HW1 | HW2 | // | 1 1 1 | op1 (2) | op2 (7) | x (4) |op| x (15) | // With op1 == 0b00, a 16-bit instruction is encoded. // // We test only the first halfword, looking for op != 0b00. static bool is32bitInstruction(uint16_t hw) { return (hw & 0xe000) == 0xe000 && (hw & 0x1800) != 0x0000; } // Reference from ARM Architecture Reference Manual ARMv7-A and ARMv7-R edition // section A6.3.4 Branches and miscellaneous control. // | HW1 | HW2 | // | 1 1 1 | 1 0 | op (7) | x (4) | 1 | op1 (3) | op2 (4) | imm8 (8) | // op1 == 0x0 op != x111xxx | Conditional branch (Bcc.W) // op1 == 0x1 | Branch (B.W) // op1 == 1x0 | Branch with Link and Exchange (BLX.w) // op1 == 1x1 | Branch with Link (BL.W) static bool isBcc(uint32_t instr) { return (instr & 0xf800d000) == 0xf0008000 && (instr & 0x03800000) != 0x03800000; } static bool isB(uint32_t instr) { return (instr & 0xf800d000) == 0xf0009000; } static bool isBLX(uint32_t instr) { return (instr & 0xf800d000) == 0xf000c000; } static bool isBL(uint32_t instr) { return (instr & 0xf800d000) == 0xf000d000; } static bool is32bitBranch(uint32_t instr) { return isBcc(instr) || isB(instr) || isBL(instr) || isBLX(instr); } Patch657417Section::Patch657417Section(InputSection *p, uint64_t off, uint32_t instr, bool isARM) : SyntheticSection(SHF_ALLOC | SHF_EXECINSTR, SHT_PROGBITS, 4, ".text.patch"), patchee(p), patcheeOffset(off), instr(instr), isARM(isARM) { parent = p->getParent(); patchSym = addSyntheticLocal( saver.save("__CortexA8657417_" + utohexstr(getBranchAddr())), STT_FUNC, isARM ? 0 : 1, getSize(), *this); addSyntheticLocal(saver.save(isARM ? "$a" : "$t"), STT_NOTYPE, 0, 0, *this); } uint64_t Patch657417Section::getBranchAddr() const { return patchee->getVA(patcheeOffset); } // Given a branch instruction instr at sourceAddr work out its destination // address. This is only used when the branch instruction has no relocation. static uint64_t getThumbDestAddr(uint64_t sourceAddr, uint32_t instr) { uint8_t buf[4]; write16le(buf, instr >> 16); write16le(buf + 2, instr & 0x0000ffff); int64_t offset; if (isBcc(instr)) offset = target->getImplicitAddend(buf, R_ARM_THM_JUMP19); else if (isB(instr)) offset = target->getImplicitAddend(buf, R_ARM_THM_JUMP24); else offset = target->getImplicitAddend(buf, R_ARM_THM_CALL); return sourceAddr + offset + 4; } void Patch657417Section::writeTo(uint8_t *buf) { // The base instruction of the patch is always a 32-bit unconditional branch. if (isARM) write32le(buf, 0xea000000); else write32le(buf, 0x9000f000); // If we have a relocation then apply it. if (!relocations.empty()) { relocateAlloc(buf, buf + getSize()); return; } // If we don't have a relocation then we must calculate and write the offset // ourselves. // Get the destination offset from the addend in the branch instruction. // We cannot use the instruction in the patchee section as this will have // been altered to point to us! uint64_t s = getThumbDestAddr(getBranchAddr(), instr); uint64_t p = getVA(4); target->relocateNoSym(buf, isARM ? R_ARM_JUMP24 : R_ARM_THM_JUMP24, s - p); } // Given a branch instruction spanning two 4KiB regions, at offset off from the // start of isec, return true if the destination of the branch is within the // first of the two 4Kib regions. static bool branchDestInFirstRegion(const InputSection *isec, uint64_t off, uint32_t instr, const Relocation *r) { uint64_t sourceAddr = isec->getVA(0) + off; assert((sourceAddr & 0xfff) == 0xffe); uint64_t destAddr = sourceAddr; // If there is a branch relocation at the same offset we must use this to // find the destination address as the branch could be indirected via a thunk // or the PLT. if (r) { uint64_t dst = (r->expr == R_PLT_PC) ? r->sym->getPltVA() : r->sym->getVA(); // Account for Thumb PC bias, usually cancelled to 0 by addend of -4. destAddr = dst + r->addend + 4; } else { // If there is no relocation, we must have an intra-section branch // We must extract the offset from the addend manually. destAddr = getThumbDestAddr(sourceAddr, instr); } return (destAddr & 0xfffff000) == (sourceAddr & 0xfffff000); } // Return true if a branch can reach a patch section placed after isec. // The Bcc.w instruction has a range of 1 MiB, all others have 16 MiB. static bool patchInRange(const InputSection *isec, uint64_t off, uint32_t instr) { // We need the branch at source to reach a patch section placed immediately // after isec. As there can be more than one patch in the patch section we // add 0x100 as contingency to account for worst case of 1 branch every 4KiB // for a 1 MiB range. return target->inBranchRange( isBcc(instr) ? R_ARM_THM_JUMP19 : R_ARM_THM_JUMP24, isec->getVA(off), isec->getVA() + isec->getSize() + 0x100); } struct ScanResult { // Offset of branch within its InputSection. uint64_t off; // Cached decoding of the branch instruction. uint32_t instr; // Branch relocation at off. Will be nullptr if no relocation exists. Relocation *rel; }; // Detect the erratum sequence, returning the offset of the branch instruction // and a decoding of the branch. If the erratum sequence is not found then // return an offset of 0 for the branch. 0 is a safe value to use for no patch // as there must be at least one 32-bit non-branch instruction before the // branch so the minimum offset for a patch is 4. static ScanResult scanCortexA8Errata657417(InputSection *isec, uint64_t &off, uint64_t limit) { uint64_t isecAddr = isec->getVA(0); // Advance Off so that (isecAddr + off) modulo 0x1000 is at least 0xffa. We // need to check for a 32-bit instruction immediately before a 32-bit branch // at 0xffe modulo 0x1000. off = alignTo(isecAddr + off, 0x1000, 0xffa) - isecAddr; if (off >= limit || limit - off < 8) { // Need at least 2 4-byte sized instructions to trigger erratum. off = limit; return {0, 0, nullptr}; } ScanResult scanRes = {0, 0, nullptr}; const uint8_t *buf = isec->data().begin(); // ARMv7-A Thumb 32-bit instructions are encoded 2 consecutive // little-endian halfwords. const ulittle16_t *instBuf = reinterpret_cast(buf + off); uint16_t hw11 = *instBuf++; uint16_t hw12 = *instBuf++; uint16_t hw21 = *instBuf++; uint16_t hw22 = *instBuf++; if (is32bitInstruction(hw11) && is32bitInstruction(hw21)) { uint32_t instr1 = (hw11 << 16) | hw12; uint32_t instr2 = (hw21 << 16) | hw22; if (!is32bitBranch(instr1) && is32bitBranch(instr2)) { // Find a relocation for the branch if it exists. This will be used // to determine the target. uint64_t branchOff = off + 4; auto relIt = llvm::find_if(isec->relocations, [=](const Relocation &r) { return r.offset == branchOff && (r.type == R_ARM_THM_JUMP19 || r.type == R_ARM_THM_JUMP24 || r.type == R_ARM_THM_CALL); }); if (relIt != isec->relocations.end()) scanRes.rel = &(*relIt); if (branchDestInFirstRegion(isec, branchOff, instr2, scanRes.rel)) { if (patchInRange(isec, branchOff, instr2)) { scanRes.off = branchOff; scanRes.instr = instr2; } else { warn(toString(isec->file) + ": skipping cortex-a8 657417 erratum sequence, section " + isec->name + " is too large to patch"); } } } } off += 0x1000; return scanRes; } void ARMErr657417Patcher::init() { // The Arm ABI permits a mix of ARM, Thumb and Data in the same // InputSection. We must only scan Thumb instructions to avoid false // matches. We use the mapping symbols in the InputObjects to identify this // data, caching the results in sectionMap so we don't have to recalculate // it each pass. // The ABI Section 4.5.5 Mapping symbols; defines local symbols that describe // half open intervals [Symbol Value, Next Symbol Value) of code and data // within sections. If there is no next symbol then the half open interval is // [Symbol Value, End of section). The type, code or data, is determined by // the mapping symbol name, $a for Arm code, $t for Thumb code, $d for data. auto isArmMapSymbol = [](const Symbol *s) { return s->getName() == "$a" || s->getName().startswith("$a."); }; auto isThumbMapSymbol = [](const Symbol *s) { return s->getName() == "$t" || s->getName().startswith("$t."); }; auto isDataMapSymbol = [](const Symbol *s) { return s->getName() == "$d" || s->getName().startswith("$d."); }; // Collect mapping symbols for every executable InputSection. for (InputFile *file : objectFiles) { auto *f = cast>(file); for (Symbol *s : f->getLocalSymbols()) { auto *def = dyn_cast(s); if (!def) continue; if (!isArmMapSymbol(def) && !isThumbMapSymbol(def) && !isDataMapSymbol(def)) continue; if (auto *sec = dyn_cast_or_null(def->section)) if (sec->flags & SHF_EXECINSTR) sectionMap[sec].push_back(def); } } // For each InputSection make sure the mapping symbols are in sorted in // ascending order and are in alternating Thumb, non-Thumb order. for (auto &kv : sectionMap) { std::vector &mapSyms = kv.second; llvm::stable_sort(mapSyms, [](const Defined *a, const Defined *b) { return a->value < b->value; }); mapSyms.erase(std::unique(mapSyms.begin(), mapSyms.end(), [=](const Defined *a, const Defined *b) { return (isThumbMapSymbol(a) == isThumbMapSymbol(b)); }), mapSyms.end()); // Always start with a Thumb Mapping Symbol if (!mapSyms.empty() && !isThumbMapSymbol(mapSyms.front())) mapSyms.erase(mapSyms.begin()); } initialized = true; } void ARMErr657417Patcher::insertPatches( InputSectionDescription &isd, std::vector &patches) { uint64_t spacing = 0x100000 - 0x7500; uint64_t isecLimit; uint64_t prevIsecLimit = isd.sections.front()->outSecOff; uint64_t patchUpperBound = prevIsecLimit + spacing; uint64_t outSecAddr = isd.sections.front()->getParent()->addr; // Set the outSecOff of patches to the place where we want to insert them. // We use a similar strategy to initial thunk placement, using 1 MiB as the // range of the Thumb-2 conditional branch with a contingency accounting for // thunk generation. auto patchIt = patches.begin(); auto patchEnd = patches.end(); for (const InputSection *isec : isd.sections) { isecLimit = isec->outSecOff + isec->getSize(); if (isecLimit > patchUpperBound) { for (; patchIt != patchEnd; ++patchIt) { if ((*patchIt)->getBranchAddr() - outSecAddr >= prevIsecLimit) break; (*patchIt)->outSecOff = prevIsecLimit; } patchUpperBound = prevIsecLimit + spacing; } prevIsecLimit = isecLimit; } for (; patchIt != patchEnd; ++patchIt) (*patchIt)->outSecOff = isecLimit; // Merge all patch sections. We use the outSecOff assigned above to // determine the insertion point. This is ok as we only merge into an // InputSectionDescription once per pass, and at the end of the pass // assignAddresses() will recalculate all the outSecOff values. std::vector tmp; tmp.reserve(isd.sections.size() + patches.size()); auto mergeCmp = [](const InputSection *a, const InputSection *b) { if (a->outSecOff != b->outSecOff) return a->outSecOff < b->outSecOff; return isa(a) && !isa(b); }; std::merge(isd.sections.begin(), isd.sections.end(), patches.begin(), patches.end(), std::back_inserter(tmp), mergeCmp); isd.sections = std::move(tmp); } // Given a branch instruction described by ScanRes redirect it to a patch // section containing an unconditional branch instruction to the target. // Ensure that this patch section is 4-byte aligned so that the branch cannot // span two 4 KiB regions. Place the patch section so that it is always after // isec so the branch we are patching always goes forwards. static void implementPatch(ScanResult sr, InputSection *isec, std::vector &patches) { log("detected cortex-a8-657419 erratum sequence starting at " + utohexstr(isec->getVA(sr.off)) + " in unpatched output."); Patch657417Section *psec; // We have two cases to deal with. // Case 1. There is a relocation at patcheeOffset to a symbol. The // unconditional branch in the patch must have a relocation so that any // further redirection via the PLT or a Thunk happens as normal. At // patcheeOffset we redirect the existing relocation to a Symbol defined at // the start of the patch section. // // Case 2. There is no relocation at patcheeOffset. We are unlikely to have // a symbol that we can use as a target for a relocation in the patch section. // Luckily we know that the destination cannot be indirected via the PLT or // a Thunk so we can just write the destination directly. if (sr.rel) { // Case 1. We have an existing relocation to redirect to patch and a // Symbol target. // Create a branch relocation for the unconditional branch in the patch. // This can be redirected via the PLT or Thunks. RelType patchRelType = R_ARM_THM_JUMP24; int64_t patchRelAddend = sr.rel->addend; bool destIsARM = false; if (isBL(sr.instr) || isBLX(sr.instr)) { // The final target of the branch may be ARM or Thumb, if the target // is ARM then we write the patch in ARM state to avoid a state change // Thunk from the patch to the target. uint64_t dstSymAddr = (sr.rel->expr == R_PLT_PC) ? sr.rel->sym->getPltVA() : sr.rel->sym->getVA(); destIsARM = (dstSymAddr & 1) == 0; } psec = make(isec, sr.off, sr.instr, destIsARM); if (destIsARM) { // The patch will be in ARM state. Use an ARM relocation and account for // the larger ARM PC-bias of 8 rather than Thumb's 4. patchRelType = R_ARM_JUMP24; patchRelAddend -= 4; } psec->relocations.push_back( Relocation{sr.rel->expr, patchRelType, 0, patchRelAddend, sr.rel->sym}); // Redirect the existing branch relocation to the patch. sr.rel->expr = R_PC; sr.rel->addend = -4; sr.rel->sym = psec->patchSym; } else { // Case 2. We do not have a relocation to the patch. Add a relocation of the // appropriate type to the patch at patcheeOffset. // The destination is ARM if we have a BLX. psec = make(isec, sr.off, sr.instr, isBLX(sr.instr)); RelType type; if (isBcc(sr.instr)) type = R_ARM_THM_JUMP19; else if (isB(sr.instr)) type = R_ARM_THM_JUMP24; else type = R_ARM_THM_CALL; isec->relocations.push_back( Relocation{R_PC, type, sr.off, -4, psec->patchSym}); } patches.push_back(psec); } // Scan all the instructions in InputSectionDescription, for each instance of // the erratum sequence create a Patch657417Section. We return the list of // Patch657417Sections that need to be applied to the InputSectionDescription. std::vector ARMErr657417Patcher::patchInputSectionDescription( InputSectionDescription &isd) { std::vector patches; for (InputSection *isec : isd.sections) { // LLD doesn't use the erratum sequence in SyntheticSections. if (isa(isec)) continue; // Use sectionMap to make sure we only scan Thumb code and not Arm or inline // data. We have already sorted mapSyms in ascending order and removed // consecutive mapping symbols of the same type. Our range of executable // instructions to scan is therefore [thumbSym->value, nonThumbSym->value) // or [thumbSym->value, section size). std::vector &mapSyms = sectionMap[isec]; auto thumbSym = mapSyms.begin(); while (thumbSym != mapSyms.end()) { auto nonThumbSym = std::next(thumbSym); uint64_t off = (*thumbSym)->value; uint64_t limit = (nonThumbSym == mapSyms.end()) ? isec->data().size() : (*nonThumbSym)->value; while (off < limit) { ScanResult sr = scanCortexA8Errata657417(isec, off, limit); if (sr.off) implementPatch(sr, isec, patches); } if (nonThumbSym == mapSyms.end()) break; thumbSym = std::next(nonThumbSym); } } return patches; } bool ARMErr657417Patcher::createFixes() { if (!initialized) init(); bool addressesChanged = false; for (OutputSection *os : outputSections) { if (!(os->flags & SHF_ALLOC) || !(os->flags & SHF_EXECINSTR)) continue; for (BaseCommand *bc : os->sectionCommands) if (auto *isd = dyn_cast(bc)) { std::vector patches = patchInputSectionDescription(*isd); if (!patches.empty()) { insertPatches(*isd, patches); addressesChanged = true; } } } return addressesChanged; }