//===- X86ISelDAGToDAG.cpp - A DAG pattern matching inst selector for X86 -===// // // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. // See https://llvm.org/LICENSE.txt for license information. // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception // //===----------------------------------------------------------------------===// // // This file defines a DAG pattern matching instruction selector for X86, // converting from a legalized dag to a X86 dag. // //===----------------------------------------------------------------------===// #include "X86.h" #include "X86MachineFunctionInfo.h" #include "X86RegisterInfo.h" #include "X86Subtarget.h" #include "X86TargetMachine.h" #include "llvm/ADT/Statistic.h" #include "llvm/CodeGen/MachineModuleInfo.h" #include "llvm/CodeGen/SelectionDAGISel.h" #include "llvm/Config/llvm-config.h" #include "llvm/IR/ConstantRange.h" #include "llvm/IR/Function.h" #include "llvm/IR/Instructions.h" #include "llvm/IR/Intrinsics.h" #include "llvm/IR/IntrinsicsX86.h" #include "llvm/IR/Type.h" #include "llvm/Support/Debug.h" #include "llvm/Support/ErrorHandling.h" #include "llvm/Support/KnownBits.h" #include "llvm/Support/MathExtras.h" #include using namespace llvm; #define DEBUG_TYPE "x86-isel" STATISTIC(NumLoadMoved, "Number of loads moved below TokenFactor"); static cl::opt AndImmShrink("x86-and-imm-shrink", cl::init(true), cl::desc("Enable setting constant bits to reduce size of mask immediates"), cl::Hidden); static cl::opt EnablePromoteAnyextLoad( "x86-promote-anyext-load", cl::init(true), cl::desc("Enable promoting aligned anyext load to wider load"), cl::Hidden); extern cl::opt IndirectBranchTracking; //===----------------------------------------------------------------------===// // Pattern Matcher Implementation //===----------------------------------------------------------------------===// namespace { /// This corresponds to X86AddressMode, but uses SDValue's instead of register /// numbers for the leaves of the matched tree. struct X86ISelAddressMode { enum { RegBase, FrameIndexBase } BaseType; // This is really a union, discriminated by BaseType! SDValue Base_Reg; int Base_FrameIndex; unsigned Scale; SDValue IndexReg; int32_t Disp; SDValue Segment; const GlobalValue *GV; const Constant *CP; const BlockAddress *BlockAddr; const char *ES; MCSymbol *MCSym; int JT; Align Alignment; // CP alignment. unsigned char SymbolFlags; // X86II::MO_* bool NegateIndex = false; X86ISelAddressMode() : BaseType(RegBase), Base_FrameIndex(0), Scale(1), IndexReg(), Disp(0), Segment(), GV(nullptr), CP(nullptr), BlockAddr(nullptr), ES(nullptr), MCSym(nullptr), JT(-1), SymbolFlags(X86II::MO_NO_FLAG) {} bool hasSymbolicDisplacement() const { return GV != nullptr || CP != nullptr || ES != nullptr || MCSym != nullptr || JT != -1 || BlockAddr != nullptr; } bool hasBaseOrIndexReg() const { return BaseType == FrameIndexBase || IndexReg.getNode() != nullptr || Base_Reg.getNode() != nullptr; } /// Return true if this addressing mode is already RIP-relative. bool isRIPRelative() const { if (BaseType != RegBase) return false; if (RegisterSDNode *RegNode = dyn_cast_or_null(Base_Reg.getNode())) return RegNode->getReg() == X86::RIP; return false; } void setBaseReg(SDValue Reg) { BaseType = RegBase; Base_Reg = Reg; } #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) void dump(SelectionDAG *DAG = nullptr) { dbgs() << "X86ISelAddressMode " << this << '\n'; dbgs() << "Base_Reg "; if (Base_Reg.getNode()) Base_Reg.getNode()->dump(DAG); else dbgs() << "nul\n"; if (BaseType == FrameIndexBase) dbgs() << " Base.FrameIndex " << Base_FrameIndex << '\n'; dbgs() << " Scale " << Scale << '\n' << "IndexReg "; if (NegateIndex) dbgs() << "negate "; if (IndexReg.getNode()) IndexReg.getNode()->dump(DAG); else dbgs() << "nul\n"; dbgs() << " Disp " << Disp << '\n' << "GV "; if (GV) GV->dump(); else dbgs() << "nul"; dbgs() << " CP "; if (CP) CP->dump(); else dbgs() << "nul"; dbgs() << '\n' << "ES "; if (ES) dbgs() << ES; else dbgs() << "nul"; dbgs() << " MCSym "; if (MCSym) dbgs() << MCSym; else dbgs() << "nul"; dbgs() << " JT" << JT << " Align" << Alignment.value() << '\n'; } #endif }; } namespace { //===--------------------------------------------------------------------===// /// ISel - X86-specific code to select X86 machine instructions for /// SelectionDAG operations. /// class X86DAGToDAGISel final : public SelectionDAGISel { /// Keep a pointer to the X86Subtarget around so that we can /// make the right decision when generating code for different targets. const X86Subtarget *Subtarget; /// If true, selector should try to optimize for minimum code size. bool OptForMinSize; /// Disable direct TLS access through segment registers. bool IndirectTlsSegRefs; public: explicit X86DAGToDAGISel(X86TargetMachine &tm, CodeGenOpt::Level OptLevel) : SelectionDAGISel(tm, OptLevel), Subtarget(nullptr), OptForMinSize(false), IndirectTlsSegRefs(false) {} StringRef getPassName() const override { return "X86 DAG->DAG Instruction Selection"; } bool runOnMachineFunction(MachineFunction &MF) override { // Reset the subtarget each time through. Subtarget = &MF.getSubtarget(); IndirectTlsSegRefs = MF.getFunction().hasFnAttribute( "indirect-tls-seg-refs"); // OptFor[Min]Size are used in pattern predicates that isel is matching. OptForMinSize = MF.getFunction().hasMinSize(); assert((!OptForMinSize || MF.getFunction().hasOptSize()) && "OptForMinSize implies OptForSize"); SelectionDAGISel::runOnMachineFunction(MF); return true; } void emitFunctionEntryCode() override; bool IsProfitableToFold(SDValue N, SDNode *U, SDNode *Root) const override; void PreprocessISelDAG() override; void PostprocessISelDAG() override; // Include the pieces autogenerated from the target description. #include "X86GenDAGISel.inc" private: void Select(SDNode *N) override; bool foldOffsetIntoAddress(uint64_t Offset, X86ISelAddressMode &AM); bool matchLoadInAddress(LoadSDNode *N, X86ISelAddressMode &AM); bool matchWrapper(SDValue N, X86ISelAddressMode &AM); bool matchAddress(SDValue N, X86ISelAddressMode &AM); bool matchVectorAddress(SDValue N, X86ISelAddressMode &AM); bool matchAdd(SDValue &N, X86ISelAddressMode &AM, unsigned Depth); bool matchAddressRecursively(SDValue N, X86ISelAddressMode &AM, unsigned Depth); bool matchAddressBase(SDValue N, X86ISelAddressMode &AM); bool selectAddr(SDNode *Parent, SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment); bool selectVectorAddr(MemSDNode *Parent, SDValue BasePtr, SDValue IndexOp, SDValue ScaleOp, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment); bool selectMOV64Imm32(SDValue N, SDValue &Imm); bool selectLEAAddr(SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment); bool selectLEA64_32Addr(SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment); bool selectTLSADDRAddr(SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment); bool selectRelocImm(SDValue N, SDValue &Op); bool tryFoldLoad(SDNode *Root, SDNode *P, SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment); // Convenience method where P is also root. bool tryFoldLoad(SDNode *P, SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { return tryFoldLoad(P, P, N, Base, Scale, Index, Disp, Segment); } bool tryFoldBroadcast(SDNode *Root, SDNode *P, SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment); bool isProfitableToFormMaskedOp(SDNode *N) const; /// Implement addressing mode selection for inline asm expressions. bool SelectInlineAsmMemoryOperand(const SDValue &Op, unsigned ConstraintID, std::vector &OutOps) override; void emitSpecialCodeForMain(); inline void getAddressOperands(X86ISelAddressMode &AM, const SDLoc &DL, MVT VT, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { if (AM.BaseType == X86ISelAddressMode::FrameIndexBase) Base = CurDAG->getTargetFrameIndex( AM.Base_FrameIndex, TLI->getPointerTy(CurDAG->getDataLayout())); else if (AM.Base_Reg.getNode()) Base = AM.Base_Reg; else Base = CurDAG->getRegister(0, VT); Scale = getI8Imm(AM.Scale, DL); // Negate the index if needed. if (AM.NegateIndex) { unsigned NegOpc = VT == MVT::i64 ? X86::NEG64r : X86::NEG32r; SDValue Neg = SDValue(CurDAG->getMachineNode(NegOpc, DL, VT, MVT::i32, AM.IndexReg), 0); AM.IndexReg = Neg; } if (AM.IndexReg.getNode()) Index = AM.IndexReg; else Index = CurDAG->getRegister(0, VT); // These are 32-bit even in 64-bit mode since RIP-relative offset // is 32-bit. if (AM.GV) Disp = CurDAG->getTargetGlobalAddress(AM.GV, SDLoc(), MVT::i32, AM.Disp, AM.SymbolFlags); else if (AM.CP) Disp = CurDAG->getTargetConstantPool(AM.CP, MVT::i32, AM.Alignment, AM.Disp, AM.SymbolFlags); else if (AM.ES) { assert(!AM.Disp && "Non-zero displacement is ignored with ES."); Disp = CurDAG->getTargetExternalSymbol(AM.ES, MVT::i32, AM.SymbolFlags); } else if (AM.MCSym) { assert(!AM.Disp && "Non-zero displacement is ignored with MCSym."); assert(AM.SymbolFlags == 0 && "oo"); Disp = CurDAG->getMCSymbol(AM.MCSym, MVT::i32); } else if (AM.JT != -1) { assert(!AM.Disp && "Non-zero displacement is ignored with JT."); Disp = CurDAG->getTargetJumpTable(AM.JT, MVT::i32, AM.SymbolFlags); } else if (AM.BlockAddr) Disp = CurDAG->getTargetBlockAddress(AM.BlockAddr, MVT::i32, AM.Disp, AM.SymbolFlags); else Disp = CurDAG->getTargetConstant(AM.Disp, DL, MVT::i32); if (AM.Segment.getNode()) Segment = AM.Segment; else Segment = CurDAG->getRegister(0, MVT::i16); } // Utility function to determine whether we should avoid selecting // immediate forms of instructions for better code size or not. // At a high level, we'd like to avoid such instructions when // we have similar constants used within the same basic block // that can be kept in a register. // bool shouldAvoidImmediateInstFormsForSize(SDNode *N) const { uint32_t UseCount = 0; // Do not want to hoist if we're not optimizing for size. // TODO: We'd like to remove this restriction. // See the comment in X86InstrInfo.td for more info. if (!CurDAG->shouldOptForSize()) return false; // Walk all the users of the immediate. for (SDNode::use_iterator UI = N->use_begin(), UE = N->use_end(); (UI != UE) && (UseCount < 2); ++UI) { SDNode *User = *UI; // This user is already selected. Count it as a legitimate use and // move on. if (User->isMachineOpcode()) { UseCount++; continue; } // We want to count stores of immediates as real uses. if (User->getOpcode() == ISD::STORE && User->getOperand(1).getNode() == N) { UseCount++; continue; } // We don't currently match users that have > 2 operands (except // for stores, which are handled above) // Those instruction won't match in ISEL, for now, and would // be counted incorrectly. // This may change in the future as we add additional instruction // types. if (User->getNumOperands() != 2) continue; // If this is a sign-extended 8-bit integer immediate used in an ALU // instruction, there is probably an opcode encoding to save space. auto *C = dyn_cast(N); if (C && isInt<8>(C->getSExtValue())) continue; // Immediates that are used for offsets as part of stack // manipulation should be left alone. These are typically // used to indicate SP offsets for argument passing and // will get pulled into stores/pushes (implicitly). if (User->getOpcode() == X86ISD::ADD || User->getOpcode() == ISD::ADD || User->getOpcode() == X86ISD::SUB || User->getOpcode() == ISD::SUB) { // Find the other operand of the add/sub. SDValue OtherOp = User->getOperand(0); if (OtherOp.getNode() == N) OtherOp = User->getOperand(1); // Don't count if the other operand is SP. RegisterSDNode *RegNode; if (OtherOp->getOpcode() == ISD::CopyFromReg && (RegNode = dyn_cast_or_null( OtherOp->getOperand(1).getNode()))) if ((RegNode->getReg() == X86::ESP) || (RegNode->getReg() == X86::RSP)) continue; } // ... otherwise, count this and move on. UseCount++; } // If we have more than 1 use, then recommend for hoisting. return (UseCount > 1); } /// Return a target constant with the specified value of type i8. inline SDValue getI8Imm(unsigned Imm, const SDLoc &DL) { return CurDAG->getTargetConstant(Imm, DL, MVT::i8); } /// Return a target constant with the specified value, of type i32. inline SDValue getI32Imm(unsigned Imm, const SDLoc &DL) { return CurDAG->getTargetConstant(Imm, DL, MVT::i32); } /// Return a target constant with the specified value, of type i64. inline SDValue getI64Imm(uint64_t Imm, const SDLoc &DL) { return CurDAG->getTargetConstant(Imm, DL, MVT::i64); } SDValue getExtractVEXTRACTImmediate(SDNode *N, unsigned VecWidth, const SDLoc &DL) { assert((VecWidth == 128 || VecWidth == 256) && "Unexpected vector width"); uint64_t Index = N->getConstantOperandVal(1); MVT VecVT = N->getOperand(0).getSimpleValueType(); return getI8Imm((Index * VecVT.getScalarSizeInBits()) / VecWidth, DL); } SDValue getInsertVINSERTImmediate(SDNode *N, unsigned VecWidth, const SDLoc &DL) { assert((VecWidth == 128 || VecWidth == 256) && "Unexpected vector width"); uint64_t Index = N->getConstantOperandVal(2); MVT VecVT = N->getSimpleValueType(0); return getI8Imm((Index * VecVT.getScalarSizeInBits()) / VecWidth, DL); } // Helper to detect unneeded and instructions on shift amounts. Called // from PatFrags in tablegen. bool isUnneededShiftMask(SDNode *N, unsigned Width) const { assert(N->getOpcode() == ISD::AND && "Unexpected opcode"); const APInt &Val = cast(N->getOperand(1))->getAPIntValue(); if (Val.countTrailingOnes() >= Width) return true; APInt Mask = Val | CurDAG->computeKnownBits(N->getOperand(0)).Zero; return Mask.countTrailingOnes() >= Width; } /// Return an SDNode that returns the value of the global base register. /// Output instructions required to initialize the global base register, /// if necessary. SDNode *getGlobalBaseReg(); /// Return a reference to the TargetMachine, casted to the target-specific /// type. const X86TargetMachine &getTargetMachine() const { return static_cast(TM); } /// Return a reference to the TargetInstrInfo, casted to the target-specific /// type. const X86InstrInfo *getInstrInfo() const { return Subtarget->getInstrInfo(); } /// Address-mode matching performs shift-of-and to and-of-shift /// reassociation in order to expose more scaled addressing /// opportunities. bool ComplexPatternFuncMutatesDAG() const override { return true; } bool isSExtAbsoluteSymbolRef(unsigned Width, SDNode *N) const; // Indicates we should prefer to use a non-temporal load for this load. bool useNonTemporalLoad(LoadSDNode *N) const { if (!N->isNonTemporal()) return false; unsigned StoreSize = N->getMemoryVT().getStoreSize(); if (N->getAlignment() < StoreSize) return false; switch (StoreSize) { default: llvm_unreachable("Unsupported store size"); case 4: case 8: return false; case 16: return Subtarget->hasSSE41(); case 32: return Subtarget->hasAVX2(); case 64: return Subtarget->hasAVX512(); } } bool foldLoadStoreIntoMemOperand(SDNode *Node); MachineSDNode *matchBEXTRFromAndImm(SDNode *Node); bool matchBitExtract(SDNode *Node); bool shrinkAndImmediate(SDNode *N); bool isMaskZeroExtended(SDNode *N) const; bool tryShiftAmountMod(SDNode *N); bool tryShrinkShlLogicImm(SDNode *N); bool tryVPTERNLOG(SDNode *N); bool matchVPTERNLOG(SDNode *Root, SDNode *ParentA, SDNode *ParentBC, SDValue A, SDValue B, SDValue C, uint8_t Imm); bool tryVPTESTM(SDNode *Root, SDValue Setcc, SDValue Mask); bool tryMatchBitSelect(SDNode *N); MachineSDNode *emitPCMPISTR(unsigned ROpc, unsigned MOpc, bool MayFoldLoad, const SDLoc &dl, MVT VT, SDNode *Node); MachineSDNode *emitPCMPESTR(unsigned ROpc, unsigned MOpc, bool MayFoldLoad, const SDLoc &dl, MVT VT, SDNode *Node, SDValue &InFlag); bool tryOptimizeRem8Extend(SDNode *N); bool onlyUsesZeroFlag(SDValue Flags) const; bool hasNoSignFlagUses(SDValue Flags) const; bool hasNoCarryFlagUses(SDValue Flags) const; }; } // Returns true if this masked compare can be implemented legally with this // type. static bool isLegalMaskCompare(SDNode *N, const X86Subtarget *Subtarget) { unsigned Opcode = N->getOpcode(); if (Opcode == X86ISD::CMPM || Opcode == X86ISD::CMPMM || Opcode == X86ISD::STRICT_CMPM || Opcode == ISD::SETCC || Opcode == X86ISD::CMPMM_SAE || Opcode == X86ISD::VFPCLASS) { // We can get 256-bit 8 element types here without VLX being enabled. When // this happens we will use 512-bit operations and the mask will not be // zero extended. EVT OpVT = N->getOperand(0).getValueType(); // The first operand of X86ISD::STRICT_CMPM is chain, so we need to get the // second operand. if (Opcode == X86ISD::STRICT_CMPM) OpVT = N->getOperand(1).getValueType(); if (OpVT.is256BitVector() || OpVT.is128BitVector()) return Subtarget->hasVLX(); return true; } // Scalar opcodes use 128 bit registers, but aren't subject to the VLX check. if (Opcode == X86ISD::VFPCLASSS || Opcode == X86ISD::FSETCCM || Opcode == X86ISD::FSETCCM_SAE) return true; return false; } // Returns true if we can assume the writer of the mask has zero extended it // for us. bool X86DAGToDAGISel::isMaskZeroExtended(SDNode *N) const { // If this is an AND, check if we have a compare on either side. As long as // one side guarantees the mask is zero extended, the AND will preserve those // zeros. if (N->getOpcode() == ISD::AND) return isLegalMaskCompare(N->getOperand(0).getNode(), Subtarget) || isLegalMaskCompare(N->getOperand(1).getNode(), Subtarget); return isLegalMaskCompare(N, Subtarget); } bool X86DAGToDAGISel::IsProfitableToFold(SDValue N, SDNode *U, SDNode *Root) const { if (OptLevel == CodeGenOpt::None) return false; if (!N.hasOneUse()) return false; if (N.getOpcode() != ISD::LOAD) return true; // Don't fold non-temporal loads if we have an instruction for them. if (useNonTemporalLoad(cast(N))) return false; // If N is a load, do additional profitability checks. if (U == Root) { switch (U->getOpcode()) { default: break; case X86ISD::ADD: case X86ISD::ADC: case X86ISD::SUB: case X86ISD::SBB: case X86ISD::AND: case X86ISD::XOR: case X86ISD::OR: case ISD::ADD: case ISD::ADDCARRY: case ISD::AND: case ISD::OR: case ISD::XOR: { SDValue Op1 = U->getOperand(1); // If the other operand is a 8-bit immediate we should fold the immediate // instead. This reduces code size. // e.g. // movl 4(%esp), %eax // addl $4, %eax // vs. // movl $4, %eax // addl 4(%esp), %eax // The former is 2 bytes shorter. In case where the increment is 1, then // the saving can be 4 bytes (by using incl %eax). if (ConstantSDNode *Imm = dyn_cast(Op1)) { if (Imm->getAPIntValue().isSignedIntN(8)) return false; // If this is a 64-bit AND with an immediate that fits in 32-bits, // prefer using the smaller and over folding the load. This is needed to // make sure immediates created by shrinkAndImmediate are always folded. // Ideally we would narrow the load during DAG combine and get the // best of both worlds. if (U->getOpcode() == ISD::AND && Imm->getAPIntValue().getBitWidth() == 64 && Imm->getAPIntValue().isIntN(32)) return false; // If this really a zext_inreg that can be represented with a movzx // instruction, prefer that. // TODO: We could shrink the load and fold if it is non-volatile. if (U->getOpcode() == ISD::AND && (Imm->getAPIntValue() == UINT8_MAX || Imm->getAPIntValue() == UINT16_MAX || Imm->getAPIntValue() == UINT32_MAX)) return false; // ADD/SUB with can negate the immediate and use the opposite operation // to fit 128 into a sign extended 8 bit immediate. if ((U->getOpcode() == ISD::ADD || U->getOpcode() == ISD::SUB) && (-Imm->getAPIntValue()).isSignedIntN(8)) return false; if ((U->getOpcode() == X86ISD::ADD || U->getOpcode() == X86ISD::SUB) && (-Imm->getAPIntValue()).isSignedIntN(8) && hasNoCarryFlagUses(SDValue(U, 1))) return false; } // If the other operand is a TLS address, we should fold it instead. // This produces // movl %gs:0, %eax // leal i@NTPOFF(%eax), %eax // instead of // movl $i@NTPOFF, %eax // addl %gs:0, %eax // if the block also has an access to a second TLS address this will save // a load. // FIXME: This is probably also true for non-TLS addresses. if (Op1.getOpcode() == X86ISD::Wrapper) { SDValue Val = Op1.getOperand(0); if (Val.getOpcode() == ISD::TargetGlobalTLSAddress) return false; } // Don't fold load if this matches the BTS/BTR/BTC patterns. // BTS: (or X, (shl 1, n)) // BTR: (and X, (rotl -2, n)) // BTC: (xor X, (shl 1, n)) if (U->getOpcode() == ISD::OR || U->getOpcode() == ISD::XOR) { if (U->getOperand(0).getOpcode() == ISD::SHL && isOneConstant(U->getOperand(0).getOperand(0))) return false; if (U->getOperand(1).getOpcode() == ISD::SHL && isOneConstant(U->getOperand(1).getOperand(0))) return false; } if (U->getOpcode() == ISD::AND) { SDValue U0 = U->getOperand(0); SDValue U1 = U->getOperand(1); if (U0.getOpcode() == ISD::ROTL) { auto *C = dyn_cast(U0.getOperand(0)); if (C && C->getSExtValue() == -2) return false; } if (U1.getOpcode() == ISD::ROTL) { auto *C = dyn_cast(U1.getOperand(0)); if (C && C->getSExtValue() == -2) return false; } } break; } case ISD::SHL: case ISD::SRA: case ISD::SRL: // Don't fold a load into a shift by immediate. The BMI2 instructions // support folding a load, but not an immediate. The legacy instructions // support folding an immediate, but can't fold a load. Folding an // immediate is preferable to folding a load. if (isa(U->getOperand(1))) return false; break; } } // Prevent folding a load if this can implemented with an insert_subreg or // a move that implicitly zeroes. if (Root->getOpcode() == ISD::INSERT_SUBVECTOR && isNullConstant(Root->getOperand(2)) && (Root->getOperand(0).isUndef() || ISD::isBuildVectorAllZeros(Root->getOperand(0).getNode()))) return false; return true; } // Indicates it is profitable to form an AVX512 masked operation. Returning // false will favor a masked register-register masked move or vblendm and the // operation will be selected separately. bool X86DAGToDAGISel::isProfitableToFormMaskedOp(SDNode *N) const { assert( (N->getOpcode() == ISD::VSELECT || N->getOpcode() == X86ISD::SELECTS) && "Unexpected opcode!"); // If the operation has additional users, the operation will be duplicated. // Check the use count to prevent that. // FIXME: Are there cheap opcodes we might want to duplicate? return N->getOperand(1).hasOneUse(); } /// Replace the original chain operand of the call with /// load's chain operand and move load below the call's chain operand. static void moveBelowOrigChain(SelectionDAG *CurDAG, SDValue Load, SDValue Call, SDValue OrigChain) { SmallVector Ops; SDValue Chain = OrigChain.getOperand(0); if (Chain.getNode() == Load.getNode()) Ops.push_back(Load.getOperand(0)); else { assert(Chain.getOpcode() == ISD::TokenFactor && "Unexpected chain operand"); for (unsigned i = 0, e = Chain.getNumOperands(); i != e; ++i) if (Chain.getOperand(i).getNode() == Load.getNode()) Ops.push_back(Load.getOperand(0)); else Ops.push_back(Chain.getOperand(i)); SDValue NewChain = CurDAG->getNode(ISD::TokenFactor, SDLoc(Load), MVT::Other, Ops); Ops.clear(); Ops.push_back(NewChain); } Ops.append(OrigChain->op_begin() + 1, OrigChain->op_end()); CurDAG->UpdateNodeOperands(OrigChain.getNode(), Ops); CurDAG->UpdateNodeOperands(Load.getNode(), Call.getOperand(0), Load.getOperand(1), Load.getOperand(2)); Ops.clear(); Ops.push_back(SDValue(Load.getNode(), 1)); Ops.append(Call->op_begin() + 1, Call->op_end()); CurDAG->UpdateNodeOperands(Call.getNode(), Ops); } /// Return true if call address is a load and it can be /// moved below CALLSEQ_START and the chains leading up to the call. /// Return the CALLSEQ_START by reference as a second output. /// In the case of a tail call, there isn't a callseq node between the call /// chain and the load. static bool isCalleeLoad(SDValue Callee, SDValue &Chain, bool HasCallSeq) { // The transformation is somewhat dangerous if the call's chain was glued to // the call. After MoveBelowOrigChain the load is moved between the call and // the chain, this can create a cycle if the load is not folded. So it is // *really* important that we are sure the load will be folded. if (Callee.getNode() == Chain.getNode() || !Callee.hasOneUse()) return false; LoadSDNode *LD = dyn_cast(Callee.getNode()); if (!LD || !LD->isSimple() || LD->getAddressingMode() != ISD::UNINDEXED || LD->getExtensionType() != ISD::NON_EXTLOAD) return false; // Now let's find the callseq_start. while (HasCallSeq && Chain.getOpcode() != ISD::CALLSEQ_START) { if (!Chain.hasOneUse()) return false; Chain = Chain.getOperand(0); } if (!Chain.getNumOperands()) return false; // Since we are not checking for AA here, conservatively abort if the chain // writes to memory. It's not safe to move the callee (a load) across a store. if (isa(Chain.getNode()) && cast(Chain.getNode())->writeMem()) return false; if (Chain.getOperand(0).getNode() == Callee.getNode()) return true; if (Chain.getOperand(0).getOpcode() == ISD::TokenFactor && Callee.getValue(1).isOperandOf(Chain.getOperand(0).getNode()) && Callee.getValue(1).hasOneUse()) return true; return false; } static bool isEndbrImm64(uint64_t Imm) { // There may be some other prefix bytes between 0xF3 and 0x0F1EFA. // i.g: 0xF3660F1EFA, 0xF3670F1EFA if ((Imm & 0x00FFFFFF) != 0x0F1EFA) return false; uint8_t OptionalPrefixBytes [] = {0x26, 0x2e, 0x36, 0x3e, 0x64, 0x65, 0x66, 0x67, 0xf0, 0xf2}; int i = 24; // 24bit 0x0F1EFA has matched while (i < 64) { uint8_t Byte = (Imm >> i) & 0xFF; if (Byte == 0xF3) return true; if (!llvm::is_contained(OptionalPrefixBytes, Byte)) return false; i += 8; } return false; } void X86DAGToDAGISel::PreprocessISelDAG() { bool MadeChange = false; for (SelectionDAG::allnodes_iterator I = CurDAG->allnodes_begin(), E = CurDAG->allnodes_end(); I != E; ) { SDNode *N = &*I++; // Preincrement iterator to avoid invalidation issues. // This is for CET enhancement. // // ENDBR32 and ENDBR64 have specific opcodes: // ENDBR32: F3 0F 1E FB // ENDBR64: F3 0F 1E FA // And we want that attackers won’t find unintended ENDBR32/64 // opcode matches in the binary // Here’s an example: // If the compiler had to generate asm for the following code: // a = 0xF30F1EFA // it could, for example, generate: // mov 0xF30F1EFA, dword ptr[a] // In such a case, the binary would include a gadget that starts // with a fake ENDBR64 opcode. Therefore, we split such generation // into multiple operations, let it not shows in the binary if (N->getOpcode() == ISD::Constant) { MVT VT = N->getSimpleValueType(0); int64_t Imm = cast(N)->getSExtValue(); int32_t EndbrImm = Subtarget->is64Bit() ? 0xF30F1EFA : 0xF30F1EFB; if (Imm == EndbrImm || isEndbrImm64(Imm)) { // Check that the cf-protection-branch is enabled. Metadata *CFProtectionBranch = MF->getMMI().getModule()->getModuleFlag("cf-protection-branch"); if (CFProtectionBranch || IndirectBranchTracking) { SDLoc dl(N); SDValue Complement = CurDAG->getConstant(~Imm, dl, VT, false, true); Complement = CurDAG->getNOT(dl, Complement, VT); --I; CurDAG->ReplaceAllUsesOfValueWith(SDValue(N, 0), Complement); ++I; MadeChange = true; continue; } } } // If this is a target specific AND node with no flag usages, turn it back // into ISD::AND to enable test instruction matching. if (N->getOpcode() == X86ISD::AND && !N->hasAnyUseOfValue(1)) { SDValue Res = CurDAG->getNode(ISD::AND, SDLoc(N), N->getValueType(0), N->getOperand(0), N->getOperand(1)); --I; CurDAG->ReplaceAllUsesOfValueWith(SDValue(N, 0), Res); ++I; MadeChange = true; continue; } /// Convert vector increment or decrement to sub/add with an all-ones /// constant: /// add X, <1, 1...> --> sub X, <-1, -1...> /// sub X, <1, 1...> --> add X, <-1, -1...> /// The all-ones vector constant can be materialized using a pcmpeq /// instruction that is commonly recognized as an idiom (has no register /// dependency), so that's better/smaller than loading a splat 1 constant. if ((N->getOpcode() == ISD::ADD || N->getOpcode() == ISD::SUB) && N->getSimpleValueType(0).isVector()) { APInt SplatVal; if (X86::isConstantSplat(N->getOperand(1), SplatVal) && SplatVal.isOneValue()) { SDLoc DL(N); MVT VT = N->getSimpleValueType(0); unsigned NumElts = VT.getSizeInBits() / 32; SDValue AllOnes = CurDAG->getAllOnesConstant(DL, MVT::getVectorVT(MVT::i32, NumElts)); AllOnes = CurDAG->getBitcast(VT, AllOnes); unsigned NewOpcode = N->getOpcode() == ISD::ADD ? ISD::SUB : ISD::ADD; SDValue Res = CurDAG->getNode(NewOpcode, DL, VT, N->getOperand(0), AllOnes); --I; CurDAG->ReplaceAllUsesWith(N, Res.getNode()); ++I; MadeChange = true; continue; } } switch (N->getOpcode()) { case X86ISD::VBROADCAST: { MVT VT = N->getSimpleValueType(0); // Emulate v32i16/v64i8 broadcast without BWI. if (!Subtarget->hasBWI() && (VT == MVT::v32i16 || VT == MVT::v64i8)) { MVT NarrowVT = VT == MVT::v32i16 ? MVT::v16i16 : MVT::v32i8; SDLoc dl(N); SDValue NarrowBCast = CurDAG->getNode(X86ISD::VBROADCAST, dl, NarrowVT, N->getOperand(0)); SDValue Res = CurDAG->getNode(ISD::INSERT_SUBVECTOR, dl, VT, CurDAG->getUNDEF(VT), NarrowBCast, CurDAG->getIntPtrConstant(0, dl)); unsigned Index = VT == MVT::v32i16 ? 16 : 32; Res = CurDAG->getNode(ISD::INSERT_SUBVECTOR, dl, VT, Res, NarrowBCast, CurDAG->getIntPtrConstant(Index, dl)); --I; CurDAG->ReplaceAllUsesWith(N, Res.getNode()); ++I; MadeChange = true; continue; } break; } case X86ISD::VBROADCAST_LOAD: { MVT VT = N->getSimpleValueType(0); // Emulate v32i16/v64i8 broadcast without BWI. if (!Subtarget->hasBWI() && (VT == MVT::v32i16 || VT == MVT::v64i8)) { MVT NarrowVT = VT == MVT::v32i16 ? MVT::v16i16 : MVT::v32i8; auto *MemNode = cast(N); SDLoc dl(N); SDVTList VTs = CurDAG->getVTList(NarrowVT, MVT::Other); SDValue Ops[] = {MemNode->getChain(), MemNode->getBasePtr()}; SDValue NarrowBCast = CurDAG->getMemIntrinsicNode( X86ISD::VBROADCAST_LOAD, dl, VTs, Ops, MemNode->getMemoryVT(), MemNode->getMemOperand()); SDValue Res = CurDAG->getNode(ISD::INSERT_SUBVECTOR, dl, VT, CurDAG->getUNDEF(VT), NarrowBCast, CurDAG->getIntPtrConstant(0, dl)); unsigned Index = VT == MVT::v32i16 ? 16 : 32; Res = CurDAG->getNode(ISD::INSERT_SUBVECTOR, dl, VT, Res, NarrowBCast, CurDAG->getIntPtrConstant(Index, dl)); --I; SDValue To[] = {Res, NarrowBCast.getValue(1)}; CurDAG->ReplaceAllUsesWith(N, To); ++I; MadeChange = true; continue; } break; } case ISD::VSELECT: { // Replace VSELECT with non-mask conditions with with BLENDV. if (N->getOperand(0).getValueType().getVectorElementType() == MVT::i1) break; assert(Subtarget->hasSSE41() && "Expected SSE4.1 support!"); SDValue Blendv = CurDAG->getNode(X86ISD::BLENDV, SDLoc(N), N->getValueType(0), N->getOperand(0), N->getOperand(1), N->getOperand(2)); --I; CurDAG->ReplaceAllUsesWith(N, Blendv.getNode()); ++I; MadeChange = true; continue; } case ISD::FP_ROUND: case ISD::STRICT_FP_ROUND: case ISD::FP_TO_SINT: case ISD::FP_TO_UINT: case ISD::STRICT_FP_TO_SINT: case ISD::STRICT_FP_TO_UINT: { // Replace vector fp_to_s/uint with their X86 specific equivalent so we // don't need 2 sets of patterns. if (!N->getSimpleValueType(0).isVector()) break; unsigned NewOpc; switch (N->getOpcode()) { default: llvm_unreachable("Unexpected opcode!"); case ISD::FP_ROUND: NewOpc = X86ISD::VFPROUND; break; case ISD::STRICT_FP_ROUND: NewOpc = X86ISD::STRICT_VFPROUND; break; case ISD::STRICT_FP_TO_SINT: NewOpc = X86ISD::STRICT_CVTTP2SI; break; case ISD::FP_TO_SINT: NewOpc = X86ISD::CVTTP2SI; break; case ISD::STRICT_FP_TO_UINT: NewOpc = X86ISD::STRICT_CVTTP2UI; break; case ISD::FP_TO_UINT: NewOpc = X86ISD::CVTTP2UI; break; } SDValue Res; if (N->isStrictFPOpcode()) Res = CurDAG->getNode(NewOpc, SDLoc(N), {N->getValueType(0), MVT::Other}, {N->getOperand(0), N->getOperand(1)}); else Res = CurDAG->getNode(NewOpc, SDLoc(N), N->getValueType(0), N->getOperand(0)); --I; CurDAG->ReplaceAllUsesWith(N, Res.getNode()); ++I; MadeChange = true; continue; } case ISD::SHL: case ISD::SRA: case ISD::SRL: { // Replace vector shifts with their X86 specific equivalent so we don't // need 2 sets of patterns. if (!N->getValueType(0).isVector()) break; unsigned NewOpc; switch (N->getOpcode()) { default: llvm_unreachable("Unexpected opcode!"); case ISD::SHL: NewOpc = X86ISD::VSHLV; break; case ISD::SRA: NewOpc = X86ISD::VSRAV; break; case ISD::SRL: NewOpc = X86ISD::VSRLV; break; } SDValue Res = CurDAG->getNode(NewOpc, SDLoc(N), N->getValueType(0), N->getOperand(0), N->getOperand(1)); --I; CurDAG->ReplaceAllUsesOfValueWith(SDValue(N, 0), Res); ++I; MadeChange = true; continue; } case ISD::ANY_EXTEND: case ISD::ANY_EXTEND_VECTOR_INREG: { // Replace vector any extend with the zero extend equivalents so we don't // need 2 sets of patterns. Ignore vXi1 extensions. if (!N->getValueType(0).isVector()) break; unsigned NewOpc; if (N->getOperand(0).getScalarValueSizeInBits() == 1) { assert(N->getOpcode() == ISD::ANY_EXTEND && "Unexpected opcode for mask vector!"); NewOpc = ISD::SIGN_EXTEND; } else { NewOpc = N->getOpcode() == ISD::ANY_EXTEND ? ISD::ZERO_EXTEND : ISD::ZERO_EXTEND_VECTOR_INREG; } SDValue Res = CurDAG->getNode(NewOpc, SDLoc(N), N->getValueType(0), N->getOperand(0)); --I; CurDAG->ReplaceAllUsesOfValueWith(SDValue(N, 0), Res); ++I; MadeChange = true; continue; } case ISD::FCEIL: case ISD::STRICT_FCEIL: case ISD::FFLOOR: case ISD::STRICT_FFLOOR: case ISD::FTRUNC: case ISD::STRICT_FTRUNC: case ISD::FROUNDEVEN: case ISD::STRICT_FROUNDEVEN: case ISD::FNEARBYINT: case ISD::STRICT_FNEARBYINT: case ISD::FRINT: case ISD::STRICT_FRINT: { // Replace fp rounding with their X86 specific equivalent so we don't // need 2 sets of patterns. unsigned Imm; switch (N->getOpcode()) { default: llvm_unreachable("Unexpected opcode!"); case ISD::STRICT_FCEIL: case ISD::FCEIL: Imm = 0xA; break; case ISD::STRICT_FFLOOR: case ISD::FFLOOR: Imm = 0x9; break; case ISD::STRICT_FTRUNC: case ISD::FTRUNC: Imm = 0xB; break; case ISD::STRICT_FROUNDEVEN: case ISD::FROUNDEVEN: Imm = 0x8; break; case ISD::STRICT_FNEARBYINT: case ISD::FNEARBYINT: Imm = 0xC; break; case ISD::STRICT_FRINT: case ISD::FRINT: Imm = 0x4; break; } SDLoc dl(N); bool IsStrict = N->isStrictFPOpcode(); SDValue Res; if (IsStrict) Res = CurDAG->getNode(X86ISD::STRICT_VRNDSCALE, dl, {N->getValueType(0), MVT::Other}, {N->getOperand(0), N->getOperand(1), CurDAG->getTargetConstant(Imm, dl, MVT::i32)}); else Res = CurDAG->getNode(X86ISD::VRNDSCALE, dl, N->getValueType(0), N->getOperand(0), CurDAG->getTargetConstant(Imm, dl, MVT::i32)); --I; CurDAG->ReplaceAllUsesWith(N, Res.getNode()); ++I; MadeChange = true; continue; } case X86ISD::FANDN: case X86ISD::FAND: case X86ISD::FOR: case X86ISD::FXOR: { // Widen scalar fp logic ops to vector to reduce isel patterns. // FIXME: Can we do this during lowering/combine. MVT VT = N->getSimpleValueType(0); if (VT.isVector() || VT == MVT::f128) break; MVT VecVT = VT == MVT::f64 ? MVT::v2f64 : MVT::v4f32; SDLoc dl(N); SDValue Op0 = CurDAG->getNode(ISD::SCALAR_TO_VECTOR, dl, VecVT, N->getOperand(0)); SDValue Op1 = CurDAG->getNode(ISD::SCALAR_TO_VECTOR, dl, VecVT, N->getOperand(1)); SDValue Res; if (Subtarget->hasSSE2()) { EVT IntVT = EVT(VecVT).changeVectorElementTypeToInteger(); Op0 = CurDAG->getNode(ISD::BITCAST, dl, IntVT, Op0); Op1 = CurDAG->getNode(ISD::BITCAST, dl, IntVT, Op1); unsigned Opc; switch (N->getOpcode()) { default: llvm_unreachable("Unexpected opcode!"); case X86ISD::FANDN: Opc = X86ISD::ANDNP; break; case X86ISD::FAND: Opc = ISD::AND; break; case X86ISD::FOR: Opc = ISD::OR; break; case X86ISD::FXOR: Opc = ISD::XOR; break; } Res = CurDAG->getNode(Opc, dl, IntVT, Op0, Op1); Res = CurDAG->getNode(ISD::BITCAST, dl, VecVT, Res); } else { Res = CurDAG->getNode(N->getOpcode(), dl, VecVT, Op0, Op1); } Res = CurDAG->getNode(ISD::EXTRACT_VECTOR_ELT, dl, VT, Res, CurDAG->getIntPtrConstant(0, dl)); --I; CurDAG->ReplaceAllUsesOfValueWith(SDValue(N, 0), Res); ++I; MadeChange = true; continue; } } if (OptLevel != CodeGenOpt::None && // Only do this when the target can fold the load into the call or // jmp. !Subtarget->useIndirectThunkCalls() && ((N->getOpcode() == X86ISD::CALL && !Subtarget->slowTwoMemOps()) || (N->getOpcode() == X86ISD::TC_RETURN && (Subtarget->is64Bit() || !getTargetMachine().isPositionIndependent())))) { /// Also try moving call address load from outside callseq_start to just /// before the call to allow it to be folded. /// /// [Load chain] /// ^ /// | /// [Load] /// ^ ^ /// | | /// / \-- /// / | ///[CALLSEQ_START] | /// ^ | /// | | /// [LOAD/C2Reg] | /// | | /// \ / /// \ / /// [CALL] bool HasCallSeq = N->getOpcode() == X86ISD::CALL; SDValue Chain = N->getOperand(0); SDValue Load = N->getOperand(1); if (!isCalleeLoad(Load, Chain, HasCallSeq)) continue; moveBelowOrigChain(CurDAG, Load, SDValue(N, 0), Chain); ++NumLoadMoved; MadeChange = true; continue; } // Lower fpround and fpextend nodes that target the FP stack to be store and // load to the stack. This is a gross hack. We would like to simply mark // these as being illegal, but when we do that, legalize produces these when // it expands calls, then expands these in the same legalize pass. We would // like dag combine to be able to hack on these between the call expansion // and the node legalization. As such this pass basically does "really // late" legalization of these inline with the X86 isel pass. // FIXME: This should only happen when not compiled with -O0. switch (N->getOpcode()) { default: continue; case ISD::FP_ROUND: case ISD::FP_EXTEND: { MVT SrcVT = N->getOperand(0).getSimpleValueType(); MVT DstVT = N->getSimpleValueType(0); // If any of the sources are vectors, no fp stack involved. if (SrcVT.isVector() || DstVT.isVector()) continue; // If the source and destination are SSE registers, then this is a legal // conversion that should not be lowered. const X86TargetLowering *X86Lowering = static_cast(TLI); bool SrcIsSSE = X86Lowering->isScalarFPTypeInSSEReg(SrcVT); bool DstIsSSE = X86Lowering->isScalarFPTypeInSSEReg(DstVT); if (SrcIsSSE && DstIsSSE) continue; if (!SrcIsSSE && !DstIsSSE) { // If this is an FPStack extension, it is a noop. if (N->getOpcode() == ISD::FP_EXTEND) continue; // If this is a value-preserving FPStack truncation, it is a noop. if (N->getConstantOperandVal(1)) continue; } // Here we could have an FP stack truncation or an FPStack <-> SSE convert. // FPStack has extload and truncstore. SSE can fold direct loads into other // operations. Based on this, decide what we want to do. MVT MemVT = (N->getOpcode() == ISD::FP_ROUND) ? DstVT : SrcVT; SDValue MemTmp = CurDAG->CreateStackTemporary(MemVT); int SPFI = cast(MemTmp)->getIndex(); MachinePointerInfo MPI = MachinePointerInfo::getFixedStack(CurDAG->getMachineFunction(), SPFI); SDLoc dl(N); // FIXME: optimize the case where the src/dest is a load or store? SDValue Store = CurDAG->getTruncStore( CurDAG->getEntryNode(), dl, N->getOperand(0), MemTmp, MPI, MemVT); SDValue Result = CurDAG->getExtLoad(ISD::EXTLOAD, dl, DstVT, Store, MemTmp, MPI, MemVT); // We're about to replace all uses of the FP_ROUND/FP_EXTEND with the // extload we created. This will cause general havok on the dag because // anything below the conversion could be folded into other existing nodes. // To avoid invalidating 'I', back it up to the convert node. --I; CurDAG->ReplaceAllUsesOfValueWith(SDValue(N, 0), Result); break; } //The sequence of events for lowering STRICT_FP versions of these nodes requires //dealing with the chain differently, as there is already a preexisting chain. case ISD::STRICT_FP_ROUND: case ISD::STRICT_FP_EXTEND: { MVT SrcVT = N->getOperand(1).getSimpleValueType(); MVT DstVT = N->getSimpleValueType(0); // If any of the sources are vectors, no fp stack involved. if (SrcVT.isVector() || DstVT.isVector()) continue; // If the source and destination are SSE registers, then this is a legal // conversion that should not be lowered. const X86TargetLowering *X86Lowering = static_cast(TLI); bool SrcIsSSE = X86Lowering->isScalarFPTypeInSSEReg(SrcVT); bool DstIsSSE = X86Lowering->isScalarFPTypeInSSEReg(DstVT); if (SrcIsSSE && DstIsSSE) continue; if (!SrcIsSSE && !DstIsSSE) { // If this is an FPStack extension, it is a noop. if (N->getOpcode() == ISD::STRICT_FP_EXTEND) continue; // If this is a value-preserving FPStack truncation, it is a noop. if (N->getConstantOperandVal(2)) continue; } // Here we could have an FP stack truncation or an FPStack <-> SSE convert. // FPStack has extload and truncstore. SSE can fold direct loads into other // operations. Based on this, decide what we want to do. MVT MemVT = (N->getOpcode() == ISD::STRICT_FP_ROUND) ? DstVT : SrcVT; SDValue MemTmp = CurDAG->CreateStackTemporary(MemVT); int SPFI = cast(MemTmp)->getIndex(); MachinePointerInfo MPI = MachinePointerInfo::getFixedStack(CurDAG->getMachineFunction(), SPFI); SDLoc dl(N); // FIXME: optimize the case where the src/dest is a load or store? //Since the operation is StrictFP, use the preexisting chain. SDValue Store, Result; if (!SrcIsSSE) { SDVTList VTs = CurDAG->getVTList(MVT::Other); SDValue Ops[] = {N->getOperand(0), N->getOperand(1), MemTmp}; Store = CurDAG->getMemIntrinsicNode(X86ISD::FST, dl, VTs, Ops, MemVT, MPI, /*Align*/ None, MachineMemOperand::MOStore); if (N->getFlags().hasNoFPExcept()) { SDNodeFlags Flags = Store->getFlags(); Flags.setNoFPExcept(true); Store->setFlags(Flags); } } else { assert(SrcVT == MemVT && "Unexpected VT!"); Store = CurDAG->getStore(N->getOperand(0), dl, N->getOperand(1), MemTmp, MPI); } if (!DstIsSSE) { SDVTList VTs = CurDAG->getVTList(DstVT, MVT::Other); SDValue Ops[] = {Store, MemTmp}; Result = CurDAG->getMemIntrinsicNode( X86ISD::FLD, dl, VTs, Ops, MemVT, MPI, /*Align*/ None, MachineMemOperand::MOLoad); if (N->getFlags().hasNoFPExcept()) { SDNodeFlags Flags = Result->getFlags(); Flags.setNoFPExcept(true); Result->setFlags(Flags); } } else { assert(DstVT == MemVT && "Unexpected VT!"); Result = CurDAG->getLoad(DstVT, dl, Store, MemTmp, MPI); } // We're about to replace all uses of the FP_ROUND/FP_EXTEND with the // extload we created. This will cause general havok on the dag because // anything below the conversion could be folded into other existing nodes. // To avoid invalidating 'I', back it up to the convert node. --I; CurDAG->ReplaceAllUsesWith(N, Result.getNode()); break; } } // Now that we did that, the node is dead. Increment the iterator to the // next node to process, then delete N. ++I; MadeChange = true; } // Remove any dead nodes that may have been left behind. if (MadeChange) CurDAG->RemoveDeadNodes(); } // Look for a redundant movzx/movsx that can occur after an 8-bit divrem. bool X86DAGToDAGISel::tryOptimizeRem8Extend(SDNode *N) { unsigned Opc = N->getMachineOpcode(); if (Opc != X86::MOVZX32rr8 && Opc != X86::MOVSX32rr8 && Opc != X86::MOVSX64rr8) return false; SDValue N0 = N->getOperand(0); // We need to be extracting the lower bit of an extend. if (!N0.isMachineOpcode() || N0.getMachineOpcode() != TargetOpcode::EXTRACT_SUBREG || N0.getConstantOperandVal(1) != X86::sub_8bit) return false; // We're looking for either a movsx or movzx to match the original opcode. unsigned ExpectedOpc = Opc == X86::MOVZX32rr8 ? X86::MOVZX32rr8_NOREX : X86::MOVSX32rr8_NOREX; SDValue N00 = N0.getOperand(0); if (!N00.isMachineOpcode() || N00.getMachineOpcode() != ExpectedOpc) return false; if (Opc == X86::MOVSX64rr8) { // If we had a sign extend from 8 to 64 bits. We still need to go from 32 // to 64. MachineSDNode *Extend = CurDAG->getMachineNode(X86::MOVSX64rr32, SDLoc(N), MVT::i64, N00); ReplaceUses(N, Extend); } else { // Ok we can drop this extend and just use the original extend. ReplaceUses(N, N00.getNode()); } return true; } void X86DAGToDAGISel::PostprocessISelDAG() { // Skip peepholes at -O0. if (TM.getOptLevel() == CodeGenOpt::None) return; SelectionDAG::allnodes_iterator Position = CurDAG->allnodes_end(); bool MadeChange = false; while (Position != CurDAG->allnodes_begin()) { SDNode *N = &*--Position; // Skip dead nodes and any non-machine opcodes. if (N->use_empty() || !N->isMachineOpcode()) continue; if (tryOptimizeRem8Extend(N)) { MadeChange = true; continue; } // Look for a TESTrr+ANDrr pattern where both operands of the test are // the same. Rewrite to remove the AND. unsigned Opc = N->getMachineOpcode(); if ((Opc == X86::TEST8rr || Opc == X86::TEST16rr || Opc == X86::TEST32rr || Opc == X86::TEST64rr) && N->getOperand(0) == N->getOperand(1) && N->isOnlyUserOf(N->getOperand(0).getNode()) && N->getOperand(0).isMachineOpcode()) { SDValue And = N->getOperand(0); unsigned N0Opc = And.getMachineOpcode(); if (N0Opc == X86::AND8rr || N0Opc == X86::AND16rr || N0Opc == X86::AND32rr || N0Opc == X86::AND64rr) { MachineSDNode *Test = CurDAG->getMachineNode(Opc, SDLoc(N), MVT::i32, And.getOperand(0), And.getOperand(1)); ReplaceUses(N, Test); MadeChange = true; continue; } if (N0Opc == X86::AND8rm || N0Opc == X86::AND16rm || N0Opc == X86::AND32rm || N0Opc == X86::AND64rm) { unsigned NewOpc; switch (N0Opc) { case X86::AND8rm: NewOpc = X86::TEST8mr; break; case X86::AND16rm: NewOpc = X86::TEST16mr; break; case X86::AND32rm: NewOpc = X86::TEST32mr; break; case X86::AND64rm: NewOpc = X86::TEST64mr; break; } // Need to swap the memory and register operand. SDValue Ops[] = { And.getOperand(1), And.getOperand(2), And.getOperand(3), And.getOperand(4), And.getOperand(5), And.getOperand(0), And.getOperand(6) /* Chain */ }; MachineSDNode *Test = CurDAG->getMachineNode(NewOpc, SDLoc(N), MVT::i32, MVT::Other, Ops); CurDAG->setNodeMemRefs( Test, cast(And.getNode())->memoperands()); ReplaceUses(N, Test); MadeChange = true; continue; } } // Look for a KAND+KORTEST and turn it into KTEST if only the zero flag is // used. We're doing this late so we can prefer to fold the AND into masked // comparisons. Doing that can be better for the live range of the mask // register. if ((Opc == X86::KORTESTBrr || Opc == X86::KORTESTWrr || Opc == X86::KORTESTDrr || Opc == X86::KORTESTQrr) && N->getOperand(0) == N->getOperand(1) && N->isOnlyUserOf(N->getOperand(0).getNode()) && N->getOperand(0).isMachineOpcode() && onlyUsesZeroFlag(SDValue(N, 0))) { SDValue And = N->getOperand(0); unsigned N0Opc = And.getMachineOpcode(); // KANDW is legal with AVX512F, but KTESTW requires AVX512DQ. The other // KAND instructions and KTEST use the same ISA feature. if (N0Opc == X86::KANDBrr || (N0Opc == X86::KANDWrr && Subtarget->hasDQI()) || N0Opc == X86::KANDDrr || N0Opc == X86::KANDQrr) { unsigned NewOpc; switch (Opc) { default: llvm_unreachable("Unexpected opcode!"); case X86::KORTESTBrr: NewOpc = X86::KTESTBrr; break; case X86::KORTESTWrr: NewOpc = X86::KTESTWrr; break; case X86::KORTESTDrr: NewOpc = X86::KTESTDrr; break; case X86::KORTESTQrr: NewOpc = X86::KTESTQrr; break; } MachineSDNode *KTest = CurDAG->getMachineNode(NewOpc, SDLoc(N), MVT::i32, And.getOperand(0), And.getOperand(1)); ReplaceUses(N, KTest); MadeChange = true; continue; } } // Attempt to remove vectors moves that were inserted to zero upper bits. if (Opc != TargetOpcode::SUBREG_TO_REG) continue; unsigned SubRegIdx = N->getConstantOperandVal(2); if (SubRegIdx != X86::sub_xmm && SubRegIdx != X86::sub_ymm) continue; SDValue Move = N->getOperand(1); if (!Move.isMachineOpcode()) continue; // Make sure its one of the move opcodes we recognize. switch (Move.getMachineOpcode()) { default: continue; case X86::VMOVAPDrr: case X86::VMOVUPDrr: case X86::VMOVAPSrr: case X86::VMOVUPSrr: case X86::VMOVDQArr: case X86::VMOVDQUrr: case X86::VMOVAPDYrr: case X86::VMOVUPDYrr: case X86::VMOVAPSYrr: case X86::VMOVUPSYrr: case X86::VMOVDQAYrr: case X86::VMOVDQUYrr: case X86::VMOVAPDZ128rr: case X86::VMOVUPDZ128rr: case X86::VMOVAPSZ128rr: case X86::VMOVUPSZ128rr: case X86::VMOVDQA32Z128rr: case X86::VMOVDQU32Z128rr: case X86::VMOVDQA64Z128rr: case X86::VMOVDQU64Z128rr: case X86::VMOVAPDZ256rr: case X86::VMOVUPDZ256rr: case X86::VMOVAPSZ256rr: case X86::VMOVUPSZ256rr: case X86::VMOVDQA32Z256rr: case X86::VMOVDQU32Z256rr: case X86::VMOVDQA64Z256rr: case X86::VMOVDQU64Z256rr: break; } SDValue In = Move.getOperand(0); if (!In.isMachineOpcode() || In.getMachineOpcode() <= TargetOpcode::GENERIC_OP_END) continue; // Make sure the instruction has a VEX, XOP, or EVEX prefix. This covers // the SHA instructions which use a legacy encoding. uint64_t TSFlags = getInstrInfo()->get(In.getMachineOpcode()).TSFlags; if ((TSFlags & X86II::EncodingMask) != X86II::VEX && (TSFlags & X86II::EncodingMask) != X86II::EVEX && (TSFlags & X86II::EncodingMask) != X86II::XOP) continue; // Producing instruction is another vector instruction. We can drop the // move. CurDAG->UpdateNodeOperands(N, N->getOperand(0), In, N->getOperand(2)); MadeChange = true; } if (MadeChange) CurDAG->RemoveDeadNodes(); } /// Emit any code that needs to be executed only in the main function. void X86DAGToDAGISel::emitSpecialCodeForMain() { if (Subtarget->isTargetCygMing()) { TargetLowering::ArgListTy Args; auto &DL = CurDAG->getDataLayout(); TargetLowering::CallLoweringInfo CLI(*CurDAG); CLI.setChain(CurDAG->getRoot()) .setCallee(CallingConv::C, Type::getVoidTy(*CurDAG->getContext()), CurDAG->getExternalSymbol("__main", TLI->getPointerTy(DL)), std::move(Args)); const TargetLowering &TLI = CurDAG->getTargetLoweringInfo(); std::pair Result = TLI.LowerCallTo(CLI); CurDAG->setRoot(Result.second); } } void X86DAGToDAGISel::emitFunctionEntryCode() { // If this is main, emit special code for main. const Function &F = MF->getFunction(); if (F.hasExternalLinkage() && F.getName() == "main") emitSpecialCodeForMain(); } static bool isDispSafeForFrameIndex(int64_t Val) { // On 64-bit platforms, we can run into an issue where a frame index // includes a displacement that, when added to the explicit displacement, // will overflow the displacement field. Assuming that the frame index // displacement fits into a 31-bit integer (which is only slightly more // aggressive than the current fundamental assumption that it fits into // a 32-bit integer), a 31-bit disp should always be safe. return isInt<31>(Val); } bool X86DAGToDAGISel::foldOffsetIntoAddress(uint64_t Offset, X86ISelAddressMode &AM) { // We may have already matched a displacement and the caller just added the // symbolic displacement. So we still need to do the checks even if Offset // is zero. int64_t Val = AM.Disp + Offset; // Cannot combine ExternalSymbol displacements with integer offsets. if (Val != 0 && (AM.ES || AM.MCSym)) return true; CodeModel::Model M = TM.getCodeModel(); if (Subtarget->is64Bit()) { if (Val != 0 && !X86::isOffsetSuitableForCodeModel(Val, M, AM.hasSymbolicDisplacement())) return true; // In addition to the checks required for a register base, check that // we do not try to use an unsafe Disp with a frame index. if (AM.BaseType == X86ISelAddressMode::FrameIndexBase && !isDispSafeForFrameIndex(Val)) return true; } AM.Disp = Val; return false; } bool X86DAGToDAGISel::matchLoadInAddress(LoadSDNode *N, X86ISelAddressMode &AM){ SDValue Address = N->getOperand(1); // load gs:0 -> GS segment register. // load fs:0 -> FS segment register. // // This optimization is valid because the GNU TLS model defines that // gs:0 (or fs:0 on X86-64) contains its own address. // For more information see http://people.redhat.com/drepper/tls.pdf if (ConstantSDNode *C = dyn_cast(Address)) if (C->getSExtValue() == 0 && AM.Segment.getNode() == nullptr && !IndirectTlsSegRefs && (Subtarget->isTargetGlibc() || Subtarget->isTargetAndroid() || Subtarget->isTargetFuchsia())) switch (N->getPointerInfo().getAddrSpace()) { case X86AS::GS: AM.Segment = CurDAG->getRegister(X86::GS, MVT::i16); return false; case X86AS::FS: AM.Segment = CurDAG->getRegister(X86::FS, MVT::i16); return false; // Address space X86AS::SS is not handled here, because it is not used to // address TLS areas. } return true; } /// Try to match X86ISD::Wrapper and X86ISD::WrapperRIP nodes into an addressing /// mode. These wrap things that will resolve down into a symbol reference. /// If no match is possible, this returns true, otherwise it returns false. bool X86DAGToDAGISel::matchWrapper(SDValue N, X86ISelAddressMode &AM) { // If the addressing mode already has a symbol as the displacement, we can // never match another symbol. if (AM.hasSymbolicDisplacement()) return true; bool IsRIPRelTLS = false; bool IsRIPRel = N.getOpcode() == X86ISD::WrapperRIP; if (IsRIPRel) { SDValue Val = N.getOperand(0); if (Val.getOpcode() == ISD::TargetGlobalTLSAddress) IsRIPRelTLS = true; } // We can't use an addressing mode in the 64-bit large code model. // Global TLS addressing is an exception. In the medium code model, // we use can use a mode when RIP wrappers are present. // That signifies access to globals that are known to be "near", // such as the GOT itself. CodeModel::Model M = TM.getCodeModel(); if (Subtarget->is64Bit() && ((M == CodeModel::Large && !IsRIPRelTLS) || (M == CodeModel::Medium && !IsRIPRel))) return true; // Base and index reg must be 0 in order to use %rip as base. if (IsRIPRel && AM.hasBaseOrIndexReg()) return true; // Make a local copy in case we can't do this fold. X86ISelAddressMode Backup = AM; int64_t Offset = 0; SDValue N0 = N.getOperand(0); if (GlobalAddressSDNode *G = dyn_cast(N0)) { AM.GV = G->getGlobal(); AM.SymbolFlags = G->getTargetFlags(); Offset = G->getOffset(); } else if (ConstantPoolSDNode *CP = dyn_cast(N0)) { AM.CP = CP->getConstVal(); AM.Alignment = CP->getAlign(); AM.SymbolFlags = CP->getTargetFlags(); Offset = CP->getOffset(); } else if (ExternalSymbolSDNode *S = dyn_cast(N0)) { AM.ES = S->getSymbol(); AM.SymbolFlags = S->getTargetFlags(); } else if (auto *S = dyn_cast(N0)) { AM.MCSym = S->getMCSymbol(); } else if (JumpTableSDNode *J = dyn_cast(N0)) { AM.JT = J->getIndex(); AM.SymbolFlags = J->getTargetFlags(); } else if (BlockAddressSDNode *BA = dyn_cast(N0)) { AM.BlockAddr = BA->getBlockAddress(); AM.SymbolFlags = BA->getTargetFlags(); Offset = BA->getOffset(); } else llvm_unreachable("Unhandled symbol reference node."); if (foldOffsetIntoAddress(Offset, AM)) { AM = Backup; return true; } if (IsRIPRel) AM.setBaseReg(CurDAG->getRegister(X86::RIP, MVT::i64)); // Commit the changes now that we know this fold is safe. return false; } /// Add the specified node to the specified addressing mode, returning true if /// it cannot be done. This just pattern matches for the addressing mode. bool X86DAGToDAGISel::matchAddress(SDValue N, X86ISelAddressMode &AM) { if (matchAddressRecursively(N, AM, 0)) return true; // Post-processing: Convert lea(,%reg,2) to lea(%reg,%reg), which has // a smaller encoding and avoids a scaled-index. if (AM.Scale == 2 && AM.BaseType == X86ISelAddressMode::RegBase && AM.Base_Reg.getNode() == nullptr) { AM.Base_Reg = AM.IndexReg; AM.Scale = 1; } // Post-processing: Convert foo to foo(%rip), even in non-PIC mode, // because it has a smaller encoding. // TODO: Which other code models can use this? switch (TM.getCodeModel()) { default: break; case CodeModel::Small: case CodeModel::Kernel: if (Subtarget->is64Bit() && AM.Scale == 1 && AM.BaseType == X86ISelAddressMode::RegBase && AM.Base_Reg.getNode() == nullptr && AM.IndexReg.getNode() == nullptr && AM.SymbolFlags == X86II::MO_NO_FLAG && AM.hasSymbolicDisplacement()) AM.Base_Reg = CurDAG->getRegister(X86::RIP, MVT::i64); break; } return false; } bool X86DAGToDAGISel::matchAdd(SDValue &N, X86ISelAddressMode &AM, unsigned Depth) { // Add an artificial use to this node so that we can keep track of // it if it gets CSE'd with a different node. HandleSDNode Handle(N); X86ISelAddressMode Backup = AM; if (!matchAddressRecursively(N.getOperand(0), AM, Depth+1) && !matchAddressRecursively(Handle.getValue().getOperand(1), AM, Depth+1)) return false; AM = Backup; // Try again after commutating the operands. if (!matchAddressRecursively(Handle.getValue().getOperand(1), AM, Depth + 1) && !matchAddressRecursively(Handle.getValue().getOperand(0), AM, Depth + 1)) return false; AM = Backup; // If we couldn't fold both operands into the address at the same time, // see if we can just put each operand into a register and fold at least // the add. if (AM.BaseType == X86ISelAddressMode::RegBase && !AM.Base_Reg.getNode() && !AM.IndexReg.getNode()) { N = Handle.getValue(); AM.Base_Reg = N.getOperand(0); AM.IndexReg = N.getOperand(1); AM.Scale = 1; return false; } N = Handle.getValue(); return true; } // Insert a node into the DAG at least before the Pos node's position. This // will reposition the node as needed, and will assign it a node ID that is <= // the Pos node's ID. Note that this does *not* preserve the uniqueness of node // IDs! The selection DAG must no longer depend on their uniqueness when this // is used. static void insertDAGNode(SelectionDAG &DAG, SDValue Pos, SDValue N) { if (N->getNodeId() == -1 || (SelectionDAGISel::getUninvalidatedNodeId(N.getNode()) > SelectionDAGISel::getUninvalidatedNodeId(Pos.getNode()))) { DAG.RepositionNode(Pos->getIterator(), N.getNode()); // Mark Node as invalid for pruning as after this it may be a successor to a // selected node but otherwise be in the same position of Pos. // Conservatively mark it with the same -abs(Id) to assure node id // invariant is preserved. N->setNodeId(Pos->getNodeId()); SelectionDAGISel::InvalidateNodeId(N.getNode()); } } // Transform "(X >> (8-C1)) & (0xff << C1)" to "((X >> 8) & 0xff) << C1" if // safe. This allows us to convert the shift and and into an h-register // extract and a scaled index. Returns false if the simplification is // performed. static bool foldMaskAndShiftToExtract(SelectionDAG &DAG, SDValue N, uint64_t Mask, SDValue Shift, SDValue X, X86ISelAddressMode &AM) { if (Shift.getOpcode() != ISD::SRL || !isa(Shift.getOperand(1)) || !Shift.hasOneUse()) return true; int ScaleLog = 8 - Shift.getConstantOperandVal(1); if (ScaleLog <= 0 || ScaleLog >= 4 || Mask != (0xffu << ScaleLog)) return true; MVT VT = N.getSimpleValueType(); SDLoc DL(N); SDValue Eight = DAG.getConstant(8, DL, MVT::i8); SDValue NewMask = DAG.getConstant(0xff, DL, VT); SDValue Srl = DAG.getNode(ISD::SRL, DL, VT, X, Eight); SDValue And = DAG.getNode(ISD::AND, DL, VT, Srl, NewMask); SDValue ShlCount = DAG.getConstant(ScaleLog, DL, MVT::i8); SDValue Shl = DAG.getNode(ISD::SHL, DL, VT, And, ShlCount); // Insert the new nodes into the topological ordering. We must do this in // a valid topological ordering as nothing is going to go back and re-sort // these nodes. We continually insert before 'N' in sequence as this is // essentially a pre-flattened and pre-sorted sequence of nodes. There is no // hierarchy left to express. insertDAGNode(DAG, N, Eight); insertDAGNode(DAG, N, Srl); insertDAGNode(DAG, N, NewMask); insertDAGNode(DAG, N, And); insertDAGNode(DAG, N, ShlCount); insertDAGNode(DAG, N, Shl); DAG.ReplaceAllUsesWith(N, Shl); DAG.RemoveDeadNode(N.getNode()); AM.IndexReg = And; AM.Scale = (1 << ScaleLog); return false; } // Transforms "(X << C1) & C2" to "(X & (C2>>C1)) << C1" if safe and if this // allows us to fold the shift into this addressing mode. Returns false if the // transform succeeded. static bool foldMaskedShiftToScaledMask(SelectionDAG &DAG, SDValue N, X86ISelAddressMode &AM) { SDValue Shift = N.getOperand(0); // Use a signed mask so that shifting right will insert sign bits. These // bits will be removed when we shift the result left so it doesn't matter // what we use. This might allow a smaller immediate encoding. int64_t Mask = cast(N->getOperand(1))->getSExtValue(); // If we have an any_extend feeding the AND, look through it to see if there // is a shift behind it. But only if the AND doesn't use the extended bits. // FIXME: Generalize this to other ANY_EXTEND than i32 to i64? bool FoundAnyExtend = false; if (Shift.getOpcode() == ISD::ANY_EXTEND && Shift.hasOneUse() && Shift.getOperand(0).getSimpleValueType() == MVT::i32 && isUInt<32>(Mask)) { FoundAnyExtend = true; Shift = Shift.getOperand(0); } if (Shift.getOpcode() != ISD::SHL || !isa(Shift.getOperand(1))) return true; SDValue X = Shift.getOperand(0); // Not likely to be profitable if either the AND or SHIFT node has more // than one use (unless all uses are for address computation). Besides, // isel mechanism requires their node ids to be reused. if (!N.hasOneUse() || !Shift.hasOneUse()) return true; // Verify that the shift amount is something we can fold. unsigned ShiftAmt = Shift.getConstantOperandVal(1); if (ShiftAmt != 1 && ShiftAmt != 2 && ShiftAmt != 3) return true; MVT VT = N.getSimpleValueType(); SDLoc DL(N); if (FoundAnyExtend) { SDValue NewX = DAG.getNode(ISD::ANY_EXTEND, DL, VT, X); insertDAGNode(DAG, N, NewX); X = NewX; } SDValue NewMask = DAG.getConstant(Mask >> ShiftAmt, DL, VT); SDValue NewAnd = DAG.getNode(ISD::AND, DL, VT, X, NewMask); SDValue NewShift = DAG.getNode(ISD::SHL, DL, VT, NewAnd, Shift.getOperand(1)); // Insert the new nodes into the topological ordering. We must do this in // a valid topological ordering as nothing is going to go back and re-sort // these nodes. We continually insert before 'N' in sequence as this is // essentially a pre-flattened and pre-sorted sequence of nodes. There is no // hierarchy left to express. insertDAGNode(DAG, N, NewMask); insertDAGNode(DAG, N, NewAnd); insertDAGNode(DAG, N, NewShift); DAG.ReplaceAllUsesWith(N, NewShift); DAG.RemoveDeadNode(N.getNode()); AM.Scale = 1 << ShiftAmt; AM.IndexReg = NewAnd; return false; } // Implement some heroics to detect shifts of masked values where the mask can // be replaced by extending the shift and undoing that in the addressing mode // scale. Patterns such as (shl (srl x, c1), c2) are canonicalized into (and // (srl x, SHIFT), MASK) by DAGCombines that don't know the shl can be done in // the addressing mode. This results in code such as: // // int f(short *y, int *lookup_table) { // ... // return *y + lookup_table[*y >> 11]; // } // // Turning into: // movzwl (%rdi), %eax // movl %eax, %ecx // shrl $11, %ecx // addl (%rsi,%rcx,4), %eax // // Instead of: // movzwl (%rdi), %eax // movl %eax, %ecx // shrl $9, %ecx // andl $124, %rcx // addl (%rsi,%rcx), %eax // // Note that this function assumes the mask is provided as a mask *after* the // value is shifted. The input chain may or may not match that, but computing // such a mask is trivial. static bool foldMaskAndShiftToScale(SelectionDAG &DAG, SDValue N, uint64_t Mask, SDValue Shift, SDValue X, X86ISelAddressMode &AM) { if (Shift.getOpcode() != ISD::SRL || !Shift.hasOneUse() || !isa(Shift.getOperand(1))) return true; unsigned ShiftAmt = Shift.getConstantOperandVal(1); unsigned MaskLZ = countLeadingZeros(Mask); unsigned MaskTZ = countTrailingZeros(Mask); // The amount of shift we're trying to fit into the addressing mode is taken // from the trailing zeros of the mask. unsigned AMShiftAmt = MaskTZ; // There is nothing we can do here unless the mask is removing some bits. // Also, the addressing mode can only represent shifts of 1, 2, or 3 bits. if (AMShiftAmt == 0 || AMShiftAmt > 3) return true; // We also need to ensure that mask is a continuous run of bits. if (countTrailingOnes(Mask >> MaskTZ) + MaskTZ + MaskLZ != 64) return true; // Scale the leading zero count down based on the actual size of the value. // Also scale it down based on the size of the shift. unsigned ScaleDown = (64 - X.getSimpleValueType().getSizeInBits()) + ShiftAmt; if (MaskLZ < ScaleDown) return true; MaskLZ -= ScaleDown; // The final check is to ensure that any masked out high bits of X are // already known to be zero. Otherwise, the mask has a semantic impact // other than masking out a couple of low bits. Unfortunately, because of // the mask, zero extensions will be removed from operands in some cases. // This code works extra hard to look through extensions because we can // replace them with zero extensions cheaply if necessary. bool ReplacingAnyExtend = false; if (X.getOpcode() == ISD::ANY_EXTEND) { unsigned ExtendBits = X.getSimpleValueType().getSizeInBits() - X.getOperand(0).getSimpleValueType().getSizeInBits(); // Assume that we'll replace the any-extend with a zero-extend, and // narrow the search to the extended value. X = X.getOperand(0); MaskLZ = ExtendBits > MaskLZ ? 0 : MaskLZ - ExtendBits; ReplacingAnyExtend = true; } APInt MaskedHighBits = APInt::getHighBitsSet(X.getSimpleValueType().getSizeInBits(), MaskLZ); KnownBits Known = DAG.computeKnownBits(X); if (MaskedHighBits != Known.Zero) return true; // We've identified a pattern that can be transformed into a single shift // and an addressing mode. Make it so. MVT VT = N.getSimpleValueType(); if (ReplacingAnyExtend) { assert(X.getValueType() != VT); // We looked through an ANY_EXTEND node, insert a ZERO_EXTEND. SDValue NewX = DAG.getNode(ISD::ZERO_EXTEND, SDLoc(X), VT, X); insertDAGNode(DAG, N, NewX); X = NewX; } SDLoc DL(N); SDValue NewSRLAmt = DAG.getConstant(ShiftAmt + AMShiftAmt, DL, MVT::i8); SDValue NewSRL = DAG.getNode(ISD::SRL, DL, VT, X, NewSRLAmt); SDValue NewSHLAmt = DAG.getConstant(AMShiftAmt, DL, MVT::i8); SDValue NewSHL = DAG.getNode(ISD::SHL, DL, VT, NewSRL, NewSHLAmt); // Insert the new nodes into the topological ordering. We must do this in // a valid topological ordering as nothing is going to go back and re-sort // these nodes. We continually insert before 'N' in sequence as this is // essentially a pre-flattened and pre-sorted sequence of nodes. There is no // hierarchy left to express. insertDAGNode(DAG, N, NewSRLAmt); insertDAGNode(DAG, N, NewSRL); insertDAGNode(DAG, N, NewSHLAmt); insertDAGNode(DAG, N, NewSHL); DAG.ReplaceAllUsesWith(N, NewSHL); DAG.RemoveDeadNode(N.getNode()); AM.Scale = 1 << AMShiftAmt; AM.IndexReg = NewSRL; return false; } // Transform "(X >> SHIFT) & (MASK << C1)" to // "((X >> (SHIFT + C1)) & (MASK)) << C1". Everything before the SHL will be // matched to a BEXTR later. Returns false if the simplification is performed. static bool foldMaskedShiftToBEXTR(SelectionDAG &DAG, SDValue N, uint64_t Mask, SDValue Shift, SDValue X, X86ISelAddressMode &AM, const X86Subtarget &Subtarget) { if (Shift.getOpcode() != ISD::SRL || !isa(Shift.getOperand(1)) || !Shift.hasOneUse() || !N.hasOneUse()) return true; // Only do this if BEXTR will be matched by matchBEXTRFromAndImm. if (!Subtarget.hasTBM() && !(Subtarget.hasBMI() && Subtarget.hasFastBEXTR())) return true; // We need to ensure that mask is a continuous run of bits. if (!isShiftedMask_64(Mask)) return true; unsigned ShiftAmt = Shift.getConstantOperandVal(1); // The amount of shift we're trying to fit into the addressing mode is taken // from the trailing zeros of the mask. unsigned AMShiftAmt = countTrailingZeros(Mask); // There is nothing we can do here unless the mask is removing some bits. // Also, the addressing mode can only represent shifts of 1, 2, or 3 bits. if (AMShiftAmt == 0 || AMShiftAmt > 3) return true; MVT VT = N.getSimpleValueType(); SDLoc DL(N); SDValue NewSRLAmt = DAG.getConstant(ShiftAmt + AMShiftAmt, DL, MVT::i8); SDValue NewSRL = DAG.getNode(ISD::SRL, DL, VT, X, NewSRLAmt); SDValue NewMask = DAG.getConstant(Mask >> AMShiftAmt, DL, VT); SDValue NewAnd = DAG.getNode(ISD::AND, DL, VT, NewSRL, NewMask); SDValue NewSHLAmt = DAG.getConstant(AMShiftAmt, DL, MVT::i8); SDValue NewSHL = DAG.getNode(ISD::SHL, DL, VT, NewAnd, NewSHLAmt); // Insert the new nodes into the topological ordering. We must do this in // a valid topological ordering as nothing is going to go back and re-sort // these nodes. We continually insert before 'N' in sequence as this is // essentially a pre-flattened and pre-sorted sequence of nodes. There is no // hierarchy left to express. insertDAGNode(DAG, N, NewSRLAmt); insertDAGNode(DAG, N, NewSRL); insertDAGNode(DAG, N, NewMask); insertDAGNode(DAG, N, NewAnd); insertDAGNode(DAG, N, NewSHLAmt); insertDAGNode(DAG, N, NewSHL); DAG.ReplaceAllUsesWith(N, NewSHL); DAG.RemoveDeadNode(N.getNode()); AM.Scale = 1 << AMShiftAmt; AM.IndexReg = NewAnd; return false; } bool X86DAGToDAGISel::matchAddressRecursively(SDValue N, X86ISelAddressMode &AM, unsigned Depth) { SDLoc dl(N); LLVM_DEBUG({ dbgs() << "MatchAddress: "; AM.dump(CurDAG); }); // Limit recursion. if (Depth > 5) return matchAddressBase(N, AM); // If this is already a %rip relative address, we can only merge immediates // into it. Instead of handling this in every case, we handle it here. // RIP relative addressing: %rip + 32-bit displacement! if (AM.isRIPRelative()) { // FIXME: JumpTable and ExternalSymbol address currently don't like // displacements. It isn't very important, but this should be fixed for // consistency. if (!(AM.ES || AM.MCSym) && AM.JT != -1) return true; if (ConstantSDNode *Cst = dyn_cast(N)) if (!foldOffsetIntoAddress(Cst->getSExtValue(), AM)) return false; return true; } switch (N.getOpcode()) { default: break; case ISD::LOCAL_RECOVER: { if (!AM.hasSymbolicDisplacement() && AM.Disp == 0) if (const auto *ESNode = dyn_cast(N.getOperand(0))) { // Use the symbol and don't prefix it. AM.MCSym = ESNode->getMCSymbol(); return false; } break; } case ISD::Constant: { uint64_t Val = cast(N)->getSExtValue(); if (!foldOffsetIntoAddress(Val, AM)) return false; break; } case X86ISD::Wrapper: case X86ISD::WrapperRIP: if (!matchWrapper(N, AM)) return false; break; case ISD::LOAD: if (!matchLoadInAddress(cast(N), AM)) return false; break; case ISD::FrameIndex: if (AM.BaseType == X86ISelAddressMode::RegBase && AM.Base_Reg.getNode() == nullptr && (!Subtarget->is64Bit() || isDispSafeForFrameIndex(AM.Disp))) { AM.BaseType = X86ISelAddressMode::FrameIndexBase; AM.Base_FrameIndex = cast(N)->getIndex(); return false; } break; case ISD::SHL: if (AM.IndexReg.getNode() != nullptr || AM.Scale != 1) break; if (ConstantSDNode *CN = dyn_cast(N.getOperand(1))) { unsigned Val = CN->getZExtValue(); // Note that we handle x<<1 as (,x,2) rather than (x,x) here so // that the base operand remains free for further matching. If // the base doesn't end up getting used, a post-processing step // in MatchAddress turns (,x,2) into (x,x), which is cheaper. if (Val == 1 || Val == 2 || Val == 3) { AM.Scale = 1 << Val; SDValue ShVal = N.getOperand(0); // Okay, we know that we have a scale by now. However, if the scaled // value is an add of something and a constant, we can fold the // constant into the disp field here. if (CurDAG->isBaseWithConstantOffset(ShVal)) { AM.IndexReg = ShVal.getOperand(0); ConstantSDNode *AddVal = cast(ShVal.getOperand(1)); uint64_t Disp = (uint64_t)AddVal->getSExtValue() << Val; if (!foldOffsetIntoAddress(Disp, AM)) return false; } AM.IndexReg = ShVal; return false; } } break; case ISD::SRL: { // Scale must not be used already. if (AM.IndexReg.getNode() != nullptr || AM.Scale != 1) break; // We only handle up to 64-bit values here as those are what matter for // addressing mode optimizations. assert(N.getSimpleValueType().getSizeInBits() <= 64 && "Unexpected value size!"); SDValue And = N.getOperand(0); if (And.getOpcode() != ISD::AND) break; SDValue X = And.getOperand(0); // The mask used for the transform is expected to be post-shift, but we // found the shift first so just apply the shift to the mask before passing // it down. if (!isa(N.getOperand(1)) || !isa(And.getOperand(1))) break; uint64_t Mask = And.getConstantOperandVal(1) >> N.getConstantOperandVal(1); // Try to fold the mask and shift into the scale, and return false if we // succeed. if (!foldMaskAndShiftToScale(*CurDAG, N, Mask, N, X, AM)) return false; break; } case ISD::SMUL_LOHI: case ISD::UMUL_LOHI: // A mul_lohi where we need the low part can be folded as a plain multiply. if (N.getResNo() != 0) break; LLVM_FALLTHROUGH; case ISD::MUL: case X86ISD::MUL_IMM: // X*[3,5,9] -> X+X*[2,4,8] if (AM.BaseType == X86ISelAddressMode::RegBase && AM.Base_Reg.getNode() == nullptr && AM.IndexReg.getNode() == nullptr) { if (ConstantSDNode *CN = dyn_cast(N.getOperand(1))) if (CN->getZExtValue() == 3 || CN->getZExtValue() == 5 || CN->getZExtValue() == 9) { AM.Scale = unsigned(CN->getZExtValue())-1; SDValue MulVal = N.getOperand(0); SDValue Reg; // Okay, we know that we have a scale by now. However, if the scaled // value is an add of something and a constant, we can fold the // constant into the disp field here. if (MulVal.getNode()->getOpcode() == ISD::ADD && MulVal.hasOneUse() && isa(MulVal.getOperand(1))) { Reg = MulVal.getOperand(0); ConstantSDNode *AddVal = cast(MulVal.getOperand(1)); uint64_t Disp = AddVal->getSExtValue() * CN->getZExtValue(); if (foldOffsetIntoAddress(Disp, AM)) Reg = N.getOperand(0); } else { Reg = N.getOperand(0); } AM.IndexReg = AM.Base_Reg = Reg; return false; } } break; case ISD::SUB: { // Given A-B, if A can be completely folded into the address and // the index field with the index field unused, use -B as the index. // This is a win if a has multiple parts that can be folded into // the address. Also, this saves a mov if the base register has // other uses, since it avoids a two-address sub instruction, however // it costs an additional mov if the index register has other uses. // Add an artificial use to this node so that we can keep track of // it if it gets CSE'd with a different node. HandleSDNode Handle(N); // Test if the LHS of the sub can be folded. X86ISelAddressMode Backup = AM; if (matchAddressRecursively(N.getOperand(0), AM, Depth+1)) { N = Handle.getValue(); AM = Backup; break; } N = Handle.getValue(); // Test if the index field is free for use. if (AM.IndexReg.getNode() || AM.isRIPRelative()) { AM = Backup; break; } int Cost = 0; SDValue RHS = N.getOperand(1); // If the RHS involves a register with multiple uses, this // transformation incurs an extra mov, due to the neg instruction // clobbering its operand. if (!RHS.getNode()->hasOneUse() || RHS.getNode()->getOpcode() == ISD::CopyFromReg || RHS.getNode()->getOpcode() == ISD::TRUNCATE || RHS.getNode()->getOpcode() == ISD::ANY_EXTEND || (RHS.getNode()->getOpcode() == ISD::ZERO_EXTEND && RHS.getOperand(0).getValueType() == MVT::i32)) ++Cost; // If the base is a register with multiple uses, this // transformation may save a mov. if ((AM.BaseType == X86ISelAddressMode::RegBase && AM.Base_Reg.getNode() && !AM.Base_Reg.getNode()->hasOneUse()) || AM.BaseType == X86ISelAddressMode::FrameIndexBase) --Cost; // If the folded LHS was interesting, this transformation saves // address arithmetic. if ((AM.hasSymbolicDisplacement() && !Backup.hasSymbolicDisplacement()) + ((AM.Disp != 0) && (Backup.Disp == 0)) + (AM.Segment.getNode() && !Backup.Segment.getNode()) >= 2) --Cost; // If it doesn't look like it may be an overall win, don't do it. if (Cost >= 0) { AM = Backup; break; } // Ok, the transformation is legal and appears profitable. Go for it. // Negation will be emitted later to avoid creating dangling nodes if this // was an unprofitable LEA. AM.IndexReg = RHS; AM.NegateIndex = true; AM.Scale = 1; return false; } case ISD::ADD: if (!matchAdd(N, AM, Depth)) return false; break; case ISD::OR: // We want to look through a transform in InstCombine and DAGCombiner that // turns 'add' into 'or', so we can treat this 'or' exactly like an 'add'. // Example: (or (and x, 1), (shl y, 3)) --> (add (and x, 1), (shl y, 3)) // An 'lea' can then be used to match the shift (multiply) and add: // and $1, %esi // lea (%rsi, %rdi, 8), %rax if (CurDAG->haveNoCommonBitsSet(N.getOperand(0), N.getOperand(1)) && !matchAdd(N, AM, Depth)) return false; break; case ISD::AND: { // Perform some heroic transforms on an and of a constant-count shift // with a constant to enable use of the scaled offset field. // Scale must not be used already. if (AM.IndexReg.getNode() != nullptr || AM.Scale != 1) break; // We only handle up to 64-bit values here as those are what matter for // addressing mode optimizations. assert(N.getSimpleValueType().getSizeInBits() <= 64 && "Unexpected value size!"); if (!isa(N.getOperand(1))) break; if (N.getOperand(0).getOpcode() == ISD::SRL) { SDValue Shift = N.getOperand(0); SDValue X = Shift.getOperand(0); uint64_t Mask = N.getConstantOperandVal(1); // Try to fold the mask and shift into an extract and scale. if (!foldMaskAndShiftToExtract(*CurDAG, N, Mask, Shift, X, AM)) return false; // Try to fold the mask and shift directly into the scale. if (!foldMaskAndShiftToScale(*CurDAG, N, Mask, Shift, X, AM)) return false; // Try to fold the mask and shift into BEXTR and scale. if (!foldMaskedShiftToBEXTR(*CurDAG, N, Mask, Shift, X, AM, *Subtarget)) return false; } // Try to swap the mask and shift to place shifts which can be done as // a scale on the outside of the mask. if (!foldMaskedShiftToScaledMask(*CurDAG, N, AM)) return false; break; } case ISD::ZERO_EXTEND: { // Try to widen a zexted shift left to the same size as its use, so we can // match the shift as a scale factor. if (AM.IndexReg.getNode() != nullptr || AM.Scale != 1) break; if (N.getOperand(0).getOpcode() != ISD::SHL || !N.getOperand(0).hasOneUse()) break; // Give up if the shift is not a valid scale factor [1,2,3]. SDValue Shl = N.getOperand(0); auto *ShAmtC = dyn_cast(Shl.getOperand(1)); if (!ShAmtC || ShAmtC->getZExtValue() > 3) break; // The narrow shift must only shift out zero bits (it must be 'nuw'). // That makes it safe to widen to the destination type. APInt HighZeros = APInt::getHighBitsSet(Shl.getValueSizeInBits(), ShAmtC->getZExtValue()); if (!CurDAG->MaskedValueIsZero(Shl.getOperand(0), HighZeros)) break; // zext (shl nuw i8 %x, C) to i32 --> shl (zext i8 %x to i32), (zext C) MVT VT = N.getSimpleValueType(); SDLoc DL(N); SDValue Zext = CurDAG->getNode(ISD::ZERO_EXTEND, DL, VT, Shl.getOperand(0)); SDValue NewShl = CurDAG->getNode(ISD::SHL, DL, VT, Zext, Shl.getOperand(1)); // Convert the shift to scale factor. AM.Scale = 1 << ShAmtC->getZExtValue(); AM.IndexReg = Zext; insertDAGNode(*CurDAG, N, Zext); insertDAGNode(*CurDAG, N, NewShl); CurDAG->ReplaceAllUsesWith(N, NewShl); CurDAG->RemoveDeadNode(N.getNode()); return false; } } return matchAddressBase(N, AM); } /// Helper for MatchAddress. Add the specified node to the /// specified addressing mode without any further recursion. bool X86DAGToDAGISel::matchAddressBase(SDValue N, X86ISelAddressMode &AM) { // Is the base register already occupied? if (AM.BaseType != X86ISelAddressMode::RegBase || AM.Base_Reg.getNode()) { // If so, check to see if the scale index register is set. if (!AM.IndexReg.getNode()) { AM.IndexReg = N; AM.Scale = 1; return false; } // Otherwise, we cannot select it. return true; } // Default, generate it as a register. AM.BaseType = X86ISelAddressMode::RegBase; AM.Base_Reg = N; return false; } /// Helper for selectVectorAddr. Handles things that can be folded into a /// gather scatter address. The index register and scale should have already /// been handled. bool X86DAGToDAGISel::matchVectorAddress(SDValue N, X86ISelAddressMode &AM) { // TODO: Support other operations. switch (N.getOpcode()) { case ISD::Constant: { uint64_t Val = cast(N)->getSExtValue(); if (!foldOffsetIntoAddress(Val, AM)) return false; break; } case X86ISD::Wrapper: if (!matchWrapper(N, AM)) return false; break; } return matchAddressBase(N, AM); } bool X86DAGToDAGISel::selectVectorAddr(MemSDNode *Parent, SDValue BasePtr, SDValue IndexOp, SDValue ScaleOp, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { X86ISelAddressMode AM; AM.IndexReg = IndexOp; AM.Scale = cast(ScaleOp)->getZExtValue(); unsigned AddrSpace = Parent->getPointerInfo().getAddrSpace(); if (AddrSpace == X86AS::GS) AM.Segment = CurDAG->getRegister(X86::GS, MVT::i16); if (AddrSpace == X86AS::FS) AM.Segment = CurDAG->getRegister(X86::FS, MVT::i16); if (AddrSpace == X86AS::SS) AM.Segment = CurDAG->getRegister(X86::SS, MVT::i16); SDLoc DL(BasePtr); MVT VT = BasePtr.getSimpleValueType(); // Try to match into the base and displacement fields. if (matchVectorAddress(BasePtr, AM)) return false; getAddressOperands(AM, DL, VT, Base, Scale, Index, Disp, Segment); return true; } /// Returns true if it is able to pattern match an addressing mode. /// It returns the operands which make up the maximal addressing mode it can /// match by reference. /// /// Parent is the parent node of the addr operand that is being matched. It /// is always a load, store, atomic node, or null. It is only null when /// checking memory operands for inline asm nodes. bool X86DAGToDAGISel::selectAddr(SDNode *Parent, SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { X86ISelAddressMode AM; if (Parent && // This list of opcodes are all the nodes that have an "addr:$ptr" operand // that are not a MemSDNode, and thus don't have proper addrspace info. Parent->getOpcode() != ISD::INTRINSIC_W_CHAIN && // unaligned loads, fixme Parent->getOpcode() != ISD::INTRINSIC_VOID && // nontemporal stores Parent->getOpcode() != X86ISD::TLSCALL && // Fixme Parent->getOpcode() != X86ISD::ENQCMD && // Fixme Parent->getOpcode() != X86ISD::ENQCMDS && // Fixme Parent->getOpcode() != X86ISD::EH_SJLJ_SETJMP && // setjmp Parent->getOpcode() != X86ISD::EH_SJLJ_LONGJMP) { // longjmp unsigned AddrSpace = cast(Parent)->getPointerInfo().getAddrSpace(); if (AddrSpace == X86AS::GS) AM.Segment = CurDAG->getRegister(X86::GS, MVT::i16); if (AddrSpace == X86AS::FS) AM.Segment = CurDAG->getRegister(X86::FS, MVT::i16); if (AddrSpace == X86AS::SS) AM.Segment = CurDAG->getRegister(X86::SS, MVT::i16); } // Save the DL and VT before calling matchAddress, it can invalidate N. SDLoc DL(N); MVT VT = N.getSimpleValueType(); if (matchAddress(N, AM)) return false; getAddressOperands(AM, DL, VT, Base, Scale, Index, Disp, Segment); return true; } bool X86DAGToDAGISel::selectMOV64Imm32(SDValue N, SDValue &Imm) { // In static codegen with small code model, we can get the address of a label // into a register with 'movl' if (N->getOpcode() != X86ISD::Wrapper) return false; N = N.getOperand(0); // At least GNU as does not accept 'movl' for TPOFF relocations. // FIXME: We could use 'movl' when we know we are targeting MC. if (N->getOpcode() == ISD::TargetGlobalTLSAddress) return false; Imm = N; if (N->getOpcode() != ISD::TargetGlobalAddress) return TM.getCodeModel() == CodeModel::Small; Optional CR = cast(N)->getGlobal()->getAbsoluteSymbolRange(); if (!CR) return TM.getCodeModel() == CodeModel::Small; return CR->getUnsignedMax().ult(1ull << 32); } bool X86DAGToDAGISel::selectLEA64_32Addr(SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { // Save the debug loc before calling selectLEAAddr, in case it invalidates N. SDLoc DL(N); if (!selectLEAAddr(N, Base, Scale, Index, Disp, Segment)) return false; RegisterSDNode *RN = dyn_cast(Base); if (RN && RN->getReg() == 0) Base = CurDAG->getRegister(0, MVT::i64); else if (Base.getValueType() == MVT::i32 && !isa(Base)) { // Base could already be %rip, particularly in the x32 ABI. SDValue ImplDef = SDValue(CurDAG->getMachineNode(X86::IMPLICIT_DEF, DL, MVT::i64), 0); Base = CurDAG->getTargetInsertSubreg(X86::sub_32bit, DL, MVT::i64, ImplDef, Base); } RN = dyn_cast(Index); if (RN && RN->getReg() == 0) Index = CurDAG->getRegister(0, MVT::i64); else { assert(Index.getValueType() == MVT::i32 && "Expect to be extending 32-bit registers for use in LEA"); SDValue ImplDef = SDValue(CurDAG->getMachineNode(X86::IMPLICIT_DEF, DL, MVT::i64), 0); Index = CurDAG->getTargetInsertSubreg(X86::sub_32bit, DL, MVT::i64, ImplDef, Index); } return true; } /// Calls SelectAddr and determines if the maximal addressing /// mode it matches can be cost effectively emitted as an LEA instruction. bool X86DAGToDAGISel::selectLEAAddr(SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { X86ISelAddressMode AM; // Save the DL and VT before calling matchAddress, it can invalidate N. SDLoc DL(N); MVT VT = N.getSimpleValueType(); // Set AM.Segment to prevent MatchAddress from using one. LEA doesn't support // segments. SDValue Copy = AM.Segment; SDValue T = CurDAG->getRegister(0, MVT::i32); AM.Segment = T; if (matchAddress(N, AM)) return false; assert (T == AM.Segment); AM.Segment = Copy; unsigned Complexity = 0; if (AM.BaseType == X86ISelAddressMode::RegBase && AM.Base_Reg.getNode()) Complexity = 1; else if (AM.BaseType == X86ISelAddressMode::FrameIndexBase) Complexity = 4; if (AM.IndexReg.getNode()) Complexity++; // Don't match just leal(,%reg,2). It's cheaper to do addl %reg, %reg, or with // a simple shift. if (AM.Scale > 1) Complexity++; // FIXME: We are artificially lowering the criteria to turn ADD %reg, $GA // to a LEA. This is determined with some experimentation but is by no means // optimal (especially for code size consideration). LEA is nice because of // its three-address nature. Tweak the cost function again when we can run // convertToThreeAddress() at register allocation time. if (AM.hasSymbolicDisplacement()) { // For X86-64, always use LEA to materialize RIP-relative addresses. if (Subtarget->is64Bit()) Complexity = 4; else Complexity += 2; } // Heuristic: try harder to form an LEA from ADD if the operands set flags. // Unlike ADD, LEA does not affect flags, so we will be less likely to require // duplicating flag-producing instructions later in the pipeline. if (N.getOpcode() == ISD::ADD) { auto isMathWithFlags = [](SDValue V) { switch (V.getOpcode()) { case X86ISD::ADD: case X86ISD::SUB: case X86ISD::ADC: case X86ISD::SBB: /* TODO: These opcodes can be added safely, but we may want to justify their inclusion for different reasons (better for reg-alloc). case X86ISD::SMUL: case X86ISD::UMUL: case X86ISD::OR: case X86ISD::XOR: case X86ISD::AND: */ // Value 1 is the flag output of the node - verify it's not dead. return !SDValue(V.getNode(), 1).use_empty(); default: return false; } }; // TODO: This could be an 'or' rather than 'and' to make the transform more // likely to happen. We might want to factor in whether there's a // load folding opportunity for the math op that disappears with LEA. if (isMathWithFlags(N.getOperand(0)) && isMathWithFlags(N.getOperand(1))) Complexity++; } if (AM.Disp) Complexity++; // If it isn't worth using an LEA, reject it. if (Complexity <= 2) return false; getAddressOperands(AM, DL, VT, Base, Scale, Index, Disp, Segment); return true; } /// This is only run on TargetGlobalTLSAddress nodes. bool X86DAGToDAGISel::selectTLSADDRAddr(SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { assert(N.getOpcode() == ISD::TargetGlobalTLSAddress); const GlobalAddressSDNode *GA = cast(N); X86ISelAddressMode AM; AM.GV = GA->getGlobal(); AM.Disp += GA->getOffset(); AM.SymbolFlags = GA->getTargetFlags(); if (Subtarget->is32Bit()) { AM.Scale = 1; AM.IndexReg = CurDAG->getRegister(X86::EBX, MVT::i32); } MVT VT = N.getSimpleValueType(); getAddressOperands(AM, SDLoc(N), VT, Base, Scale, Index, Disp, Segment); return true; } bool X86DAGToDAGISel::selectRelocImm(SDValue N, SDValue &Op) { // Keep track of the original value type and whether this value was // truncated. If we see a truncation from pointer type to VT that truncates // bits that are known to be zero, we can use a narrow reference. EVT VT = N.getValueType(); bool WasTruncated = false; if (N.getOpcode() == ISD::TRUNCATE) { WasTruncated = true; N = N.getOperand(0); } if (N.getOpcode() != X86ISD::Wrapper) return false; // We can only use non-GlobalValues as immediates if they were not truncated, // as we do not have any range information. If we have a GlobalValue and the // address was not truncated, we can select it as an operand directly. unsigned Opc = N.getOperand(0)->getOpcode(); if (Opc != ISD::TargetGlobalAddress || !WasTruncated) { Op = N.getOperand(0); // We can only select the operand directly if we didn't have to look past a // truncate. return !WasTruncated; } // Check that the global's range fits into VT. auto *GA = cast(N.getOperand(0)); Optional CR = GA->getGlobal()->getAbsoluteSymbolRange(); if (!CR || CR->getUnsignedMax().uge(1ull << VT.getSizeInBits())) return false; // Okay, we can use a narrow reference. Op = CurDAG->getTargetGlobalAddress(GA->getGlobal(), SDLoc(N), VT, GA->getOffset(), GA->getTargetFlags()); return true; } bool X86DAGToDAGISel::tryFoldLoad(SDNode *Root, SDNode *P, SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { assert(Root && P && "Unknown root/parent nodes"); if (!ISD::isNON_EXTLoad(N.getNode()) || !IsProfitableToFold(N, P, Root) || !IsLegalToFold(N, P, Root, OptLevel)) return false; return selectAddr(N.getNode(), N.getOperand(1), Base, Scale, Index, Disp, Segment); } bool X86DAGToDAGISel::tryFoldBroadcast(SDNode *Root, SDNode *P, SDValue N, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { assert(Root && P && "Unknown root/parent nodes"); if (N->getOpcode() != X86ISD::VBROADCAST_LOAD || !IsProfitableToFold(N, P, Root) || !IsLegalToFold(N, P, Root, OptLevel)) return false; return selectAddr(N.getNode(), N.getOperand(1), Base, Scale, Index, Disp, Segment); } /// Return an SDNode that returns the value of the global base register. /// Output instructions required to initialize the global base register, /// if necessary. SDNode *X86DAGToDAGISel::getGlobalBaseReg() { unsigned GlobalBaseReg = getInstrInfo()->getGlobalBaseReg(MF); auto &DL = MF->getDataLayout(); return CurDAG->getRegister(GlobalBaseReg, TLI->getPointerTy(DL)).getNode(); } bool X86DAGToDAGISel::isSExtAbsoluteSymbolRef(unsigned Width, SDNode *N) const { if (N->getOpcode() == ISD::TRUNCATE) N = N->getOperand(0).getNode(); if (N->getOpcode() != X86ISD::Wrapper) return false; auto *GA = dyn_cast(N->getOperand(0)); if (!GA) return false; Optional CR = GA->getGlobal()->getAbsoluteSymbolRange(); if (!CR) return Width == 32 && TM.getCodeModel() == CodeModel::Small; return CR->getSignedMin().sge(-1ull << Width) && CR->getSignedMax().slt(1ull << Width); } static X86::CondCode getCondFromNode(SDNode *N) { assert(N->isMachineOpcode() && "Unexpected node"); X86::CondCode CC = X86::COND_INVALID; unsigned Opc = N->getMachineOpcode(); if (Opc == X86::JCC_1) CC = static_cast(N->getConstantOperandVal(1)); else if (Opc == X86::SETCCr) CC = static_cast(N->getConstantOperandVal(0)); else if (Opc == X86::SETCCm) CC = static_cast(N->getConstantOperandVal(5)); else if (Opc == X86::CMOV16rr || Opc == X86::CMOV32rr || Opc == X86::CMOV64rr) CC = static_cast(N->getConstantOperandVal(2)); else if (Opc == X86::CMOV16rm || Opc == X86::CMOV32rm || Opc == X86::CMOV64rm) CC = static_cast(N->getConstantOperandVal(6)); return CC; } /// Test whether the given X86ISD::CMP node has any users that use a flag /// other than ZF. bool X86DAGToDAGISel::onlyUsesZeroFlag(SDValue Flags) const { // Examine each user of the node. for (SDNode::use_iterator UI = Flags->use_begin(), UE = Flags->use_end(); UI != UE; ++UI) { // Only check things that use the flags. if (UI.getUse().getResNo() != Flags.getResNo()) continue; // Only examine CopyToReg uses that copy to EFLAGS. if (UI->getOpcode() != ISD::CopyToReg || cast(UI->getOperand(1))->getReg() != X86::EFLAGS) return false; // Examine each user of the CopyToReg use. for (SDNode::use_iterator FlagUI = UI->use_begin(), FlagUE = UI->use_end(); FlagUI != FlagUE; ++FlagUI) { // Only examine the Flag result. if (FlagUI.getUse().getResNo() != 1) continue; // Anything unusual: assume conservatively. if (!FlagUI->isMachineOpcode()) return false; // Examine the condition code of the user. X86::CondCode CC = getCondFromNode(*FlagUI); switch (CC) { // Comparisons which only use the zero flag. case X86::COND_E: case X86::COND_NE: continue; // Anything else: assume conservatively. default: return false; } } } return true; } /// Test whether the given X86ISD::CMP node has any uses which require the SF /// flag to be accurate. bool X86DAGToDAGISel::hasNoSignFlagUses(SDValue Flags) const { // Examine each user of the node. for (SDNode::use_iterator UI = Flags->use_begin(), UE = Flags->use_end(); UI != UE; ++UI) { // Only check things that use the flags. if (UI.getUse().getResNo() != Flags.getResNo()) continue; // Only examine CopyToReg uses that copy to EFLAGS. if (UI->getOpcode() != ISD::CopyToReg || cast(UI->getOperand(1))->getReg() != X86::EFLAGS) return false; // Examine each user of the CopyToReg use. for (SDNode::use_iterator FlagUI = UI->use_begin(), FlagUE = UI->use_end(); FlagUI != FlagUE; ++FlagUI) { // Only examine the Flag result. if (FlagUI.getUse().getResNo() != 1) continue; // Anything unusual: assume conservatively. if (!FlagUI->isMachineOpcode()) return false; // Examine the condition code of the user. X86::CondCode CC = getCondFromNode(*FlagUI); switch (CC) { // Comparisons which don't examine the SF flag. case X86::COND_A: case X86::COND_AE: case X86::COND_B: case X86::COND_BE: case X86::COND_E: case X86::COND_NE: case X86::COND_O: case X86::COND_NO: case X86::COND_P: case X86::COND_NP: continue; // Anything else: assume conservatively. default: return false; } } } return true; } static bool mayUseCarryFlag(X86::CondCode CC) { switch (CC) { // Comparisons which don't examine the CF flag. case X86::COND_O: case X86::COND_NO: case X86::COND_E: case X86::COND_NE: case X86::COND_S: case X86::COND_NS: case X86::COND_P: case X86::COND_NP: case X86::COND_L: case X86::COND_GE: case X86::COND_G: case X86::COND_LE: return false; // Anything else: assume conservatively. default: return true; } } /// Test whether the given node which sets flags has any uses which require the /// CF flag to be accurate. bool X86DAGToDAGISel::hasNoCarryFlagUses(SDValue Flags) const { // Examine each user of the node. for (SDNode::use_iterator UI = Flags->use_begin(), UE = Flags->use_end(); UI != UE; ++UI) { // Only check things that use the flags. if (UI.getUse().getResNo() != Flags.getResNo()) continue; unsigned UIOpc = UI->getOpcode(); if (UIOpc == ISD::CopyToReg) { // Only examine CopyToReg uses that copy to EFLAGS. if (cast(UI->getOperand(1))->getReg() != X86::EFLAGS) return false; // Examine each user of the CopyToReg use. for (SDNode::use_iterator FlagUI = UI->use_begin(), FlagUE = UI->use_end(); FlagUI != FlagUE; ++FlagUI) { // Only examine the Flag result. if (FlagUI.getUse().getResNo() != 1) continue; // Anything unusual: assume conservatively. if (!FlagUI->isMachineOpcode()) return false; // Examine the condition code of the user. X86::CondCode CC = getCondFromNode(*FlagUI); if (mayUseCarryFlag(CC)) return false; } // This CopyToReg is ok. Move on to the next user. continue; } // This might be an unselected node. So look for the pre-isel opcodes that // use flags. unsigned CCOpNo; switch (UIOpc) { default: // Something unusual. Be conservative. return false; case X86ISD::SETCC: CCOpNo = 0; break; case X86ISD::SETCC_CARRY: CCOpNo = 0; break; case X86ISD::CMOV: CCOpNo = 2; break; case X86ISD::BRCOND: CCOpNo = 2; break; } X86::CondCode CC = (X86::CondCode)UI->getConstantOperandVal(CCOpNo); if (mayUseCarryFlag(CC)) return false; } return true; } /// Check whether or not the chain ending in StoreNode is suitable for doing /// the {load; op; store} to modify transformation. static bool isFusableLoadOpStorePattern(StoreSDNode *StoreNode, SDValue StoredVal, SelectionDAG *CurDAG, unsigned LoadOpNo, LoadSDNode *&LoadNode, SDValue &InputChain) { // Is the stored value result 0 of the operation? if (StoredVal.getResNo() != 0) return false; // Are there other uses of the operation other than the store? if (!StoredVal.getNode()->hasNUsesOfValue(1, 0)) return false; // Is the store non-extending and non-indexed? if (!ISD::isNormalStore(StoreNode) || StoreNode->isNonTemporal()) return false; SDValue Load = StoredVal->getOperand(LoadOpNo); // Is the stored value a non-extending and non-indexed load? if (!ISD::isNormalLoad(Load.getNode())) return false; // Return LoadNode by reference. LoadNode = cast(Load); // Is store the only read of the loaded value? if (!Load.hasOneUse()) return false; // Is the address of the store the same as the load? if (LoadNode->getBasePtr() != StoreNode->getBasePtr() || LoadNode->getOffset() != StoreNode->getOffset()) return false; bool FoundLoad = false; SmallVector ChainOps; SmallVector LoopWorklist; SmallPtrSet Visited; const unsigned int Max = 1024; // Visualization of Load-Op-Store fusion: // ------------------------- // Legend: // *-lines = Chain operand dependencies. // |-lines = Normal operand dependencies. // Dependencies flow down and right. n-suffix references multiple nodes. // // C Xn C // * * * // * * * // Xn A-LD Yn TF Yn // * * \ | * | // * * \ | * | // * * \ | => A--LD_OP_ST // * * \| \ // TF OP \ // * | \ Zn // * | \ // A-ST Zn // // This merge induced dependences from: #1: Xn -> LD, OP, Zn // #2: Yn -> LD // #3: ST -> Zn // Ensure the transform is safe by checking for the dual // dependencies to make sure we do not induce a loop. // As LD is a predecessor to both OP and ST we can do this by checking: // a). if LD is a predecessor to a member of Xn or Yn. // b). if a Zn is a predecessor to ST. // However, (b) can only occur through being a chain predecessor to // ST, which is the same as Zn being a member or predecessor of Xn, // which is a subset of LD being a predecessor of Xn. So it's // subsumed by check (a). SDValue Chain = StoreNode->getChain(); // Gather X elements in ChainOps. if (Chain == Load.getValue(1)) { FoundLoad = true; ChainOps.push_back(Load.getOperand(0)); } else if (Chain.getOpcode() == ISD::TokenFactor) { for (unsigned i = 0, e = Chain.getNumOperands(); i != e; ++i) { SDValue Op = Chain.getOperand(i); if (Op == Load.getValue(1)) { FoundLoad = true; // Drop Load, but keep its chain. No cycle check necessary. ChainOps.push_back(Load.getOperand(0)); continue; } LoopWorklist.push_back(Op.getNode()); ChainOps.push_back(Op); } } if (!FoundLoad) return false; // Worklist is currently Xn. Add Yn to worklist. for (SDValue Op : StoredVal->ops()) if (Op.getNode() != LoadNode) LoopWorklist.push_back(Op.getNode()); // Check (a) if Load is a predecessor to Xn + Yn if (SDNode::hasPredecessorHelper(Load.getNode(), Visited, LoopWorklist, Max, true)) return false; InputChain = CurDAG->getNode(ISD::TokenFactor, SDLoc(Chain), MVT::Other, ChainOps); return true; } // Change a chain of {load; op; store} of the same value into a simple op // through memory of that value, if the uses of the modified value and its // address are suitable. // // The tablegen pattern memory operand pattern is currently not able to match // the case where the EFLAGS on the original operation are used. // // To move this to tablegen, we'll need to improve tablegen to allow flags to // be transferred from a node in the pattern to the result node, probably with // a new keyword. For example, we have this // def DEC64m : RI<0xFF, MRM1m, (outs), (ins i64mem:$dst), "dec{q}\t$dst", // [(store (add (loadi64 addr:$dst), -1), addr:$dst), // (implicit EFLAGS)]>; // but maybe need something like this // def DEC64m : RI<0xFF, MRM1m, (outs), (ins i64mem:$dst), "dec{q}\t$dst", // [(store (add (loadi64 addr:$dst), -1), addr:$dst), // (transferrable EFLAGS)]>; // // Until then, we manually fold these and instruction select the operation // here. bool X86DAGToDAGISel::foldLoadStoreIntoMemOperand(SDNode *Node) { StoreSDNode *StoreNode = cast(Node); SDValue StoredVal = StoreNode->getOperand(1); unsigned Opc = StoredVal->getOpcode(); // Before we try to select anything, make sure this is memory operand size // and opcode we can handle. Note that this must match the code below that // actually lowers the opcodes. EVT MemVT = StoreNode->getMemoryVT(); if (MemVT != MVT::i64 && MemVT != MVT::i32 && MemVT != MVT::i16 && MemVT != MVT::i8) return false; bool IsCommutable = false; bool IsNegate = false; switch (Opc) { default: return false; case X86ISD::SUB: IsNegate = isNullConstant(StoredVal.getOperand(0)); break; case X86ISD::SBB: break; case X86ISD::ADD: case X86ISD::ADC: case X86ISD::AND: case X86ISD::OR: case X86ISD::XOR: IsCommutable = true; break; } unsigned LoadOpNo = IsNegate ? 1 : 0; LoadSDNode *LoadNode = nullptr; SDValue InputChain; if (!isFusableLoadOpStorePattern(StoreNode, StoredVal, CurDAG, LoadOpNo, LoadNode, InputChain)) { if (!IsCommutable) return false; // This operation is commutable, try the other operand. LoadOpNo = 1; if (!isFusableLoadOpStorePattern(StoreNode, StoredVal, CurDAG, LoadOpNo, LoadNode, InputChain)) return false; } SDValue Base, Scale, Index, Disp, Segment; if (!selectAddr(LoadNode, LoadNode->getBasePtr(), Base, Scale, Index, Disp, Segment)) return false; auto SelectOpcode = [&](unsigned Opc64, unsigned Opc32, unsigned Opc16, unsigned Opc8) { switch (MemVT.getSimpleVT().SimpleTy) { case MVT::i64: return Opc64; case MVT::i32: return Opc32; case MVT::i16: return Opc16; case MVT::i8: return Opc8; default: llvm_unreachable("Invalid size!"); } }; MachineSDNode *Result; switch (Opc) { case X86ISD::SUB: // Handle negate. if (IsNegate) { unsigned NewOpc = SelectOpcode(X86::NEG64m, X86::NEG32m, X86::NEG16m, X86::NEG8m); const SDValue Ops[] = {Base, Scale, Index, Disp, Segment, InputChain}; Result = CurDAG->getMachineNode(NewOpc, SDLoc(Node), MVT::i32, MVT::Other, Ops); break; } LLVM_FALLTHROUGH; case X86ISD::ADD: // Try to match inc/dec. if (!Subtarget->slowIncDec() || CurDAG->shouldOptForSize()) { bool IsOne = isOneConstant(StoredVal.getOperand(1)); bool IsNegOne = isAllOnesConstant(StoredVal.getOperand(1)); // ADD/SUB with 1/-1 and carry flag isn't used can use inc/dec. if ((IsOne || IsNegOne) && hasNoCarryFlagUses(StoredVal.getValue(1))) { unsigned NewOpc = ((Opc == X86ISD::ADD) == IsOne) ? SelectOpcode(X86::INC64m, X86::INC32m, X86::INC16m, X86::INC8m) : SelectOpcode(X86::DEC64m, X86::DEC32m, X86::DEC16m, X86::DEC8m); const SDValue Ops[] = {Base, Scale, Index, Disp, Segment, InputChain}; Result = CurDAG->getMachineNode(NewOpc, SDLoc(Node), MVT::i32, MVT::Other, Ops); break; } } LLVM_FALLTHROUGH; case X86ISD::ADC: case X86ISD::SBB: case X86ISD::AND: case X86ISD::OR: case X86ISD::XOR: { auto SelectRegOpcode = [SelectOpcode](unsigned Opc) { switch (Opc) { case X86ISD::ADD: return SelectOpcode(X86::ADD64mr, X86::ADD32mr, X86::ADD16mr, X86::ADD8mr); case X86ISD::ADC: return SelectOpcode(X86::ADC64mr, X86::ADC32mr, X86::ADC16mr, X86::ADC8mr); case X86ISD::SUB: return SelectOpcode(X86::SUB64mr, X86::SUB32mr, X86::SUB16mr, X86::SUB8mr); case X86ISD::SBB: return SelectOpcode(X86::SBB64mr, X86::SBB32mr, X86::SBB16mr, X86::SBB8mr); case X86ISD::AND: return SelectOpcode(X86::AND64mr, X86::AND32mr, X86::AND16mr, X86::AND8mr); case X86ISD::OR: return SelectOpcode(X86::OR64mr, X86::OR32mr, X86::OR16mr, X86::OR8mr); case X86ISD::XOR: return SelectOpcode(X86::XOR64mr, X86::XOR32mr, X86::XOR16mr, X86::XOR8mr); default: llvm_unreachable("Invalid opcode!"); } }; auto SelectImm8Opcode = [SelectOpcode](unsigned Opc) { switch (Opc) { case X86ISD::ADD: return SelectOpcode(X86::ADD64mi8, X86::ADD32mi8, X86::ADD16mi8, 0); case X86ISD::ADC: return SelectOpcode(X86::ADC64mi8, X86::ADC32mi8, X86::ADC16mi8, 0); case X86ISD::SUB: return SelectOpcode(X86::SUB64mi8, X86::SUB32mi8, X86::SUB16mi8, 0); case X86ISD::SBB: return SelectOpcode(X86::SBB64mi8, X86::SBB32mi8, X86::SBB16mi8, 0); case X86ISD::AND: return SelectOpcode(X86::AND64mi8, X86::AND32mi8, X86::AND16mi8, 0); case X86ISD::OR: return SelectOpcode(X86::OR64mi8, X86::OR32mi8, X86::OR16mi8, 0); case X86ISD::XOR: return SelectOpcode(X86::XOR64mi8, X86::XOR32mi8, X86::XOR16mi8, 0); default: llvm_unreachable("Invalid opcode!"); } }; auto SelectImmOpcode = [SelectOpcode](unsigned Opc) { switch (Opc) { case X86ISD::ADD: return SelectOpcode(X86::ADD64mi32, X86::ADD32mi, X86::ADD16mi, X86::ADD8mi); case X86ISD::ADC: return SelectOpcode(X86::ADC64mi32, X86::ADC32mi, X86::ADC16mi, X86::ADC8mi); case X86ISD::SUB: return SelectOpcode(X86::SUB64mi32, X86::SUB32mi, X86::SUB16mi, X86::SUB8mi); case X86ISD::SBB: return SelectOpcode(X86::SBB64mi32, X86::SBB32mi, X86::SBB16mi, X86::SBB8mi); case X86ISD::AND: return SelectOpcode(X86::AND64mi32, X86::AND32mi, X86::AND16mi, X86::AND8mi); case X86ISD::OR: return SelectOpcode(X86::OR64mi32, X86::OR32mi, X86::OR16mi, X86::OR8mi); case X86ISD::XOR: return SelectOpcode(X86::XOR64mi32, X86::XOR32mi, X86::XOR16mi, X86::XOR8mi); default: llvm_unreachable("Invalid opcode!"); } }; unsigned NewOpc = SelectRegOpcode(Opc); SDValue Operand = StoredVal->getOperand(1-LoadOpNo); // See if the operand is a constant that we can fold into an immediate // operand. if (auto *OperandC = dyn_cast(Operand)) { int64_t OperandV = OperandC->getSExtValue(); // Check if we can shrink the operand enough to fit in an immediate (or // fit into a smaller immediate) by negating it and switching the // operation. if ((Opc == X86ISD::ADD || Opc == X86ISD::SUB) && ((MemVT != MVT::i8 && !isInt<8>(OperandV) && isInt<8>(-OperandV)) || (MemVT == MVT::i64 && !isInt<32>(OperandV) && isInt<32>(-OperandV))) && hasNoCarryFlagUses(StoredVal.getValue(1))) { OperandV = -OperandV; Opc = Opc == X86ISD::ADD ? X86ISD::SUB : X86ISD::ADD; } // First try to fit this into an Imm8 operand. If it doesn't fit, then try // the larger immediate operand. if (MemVT != MVT::i8 && isInt<8>(OperandV)) { Operand = CurDAG->getTargetConstant(OperandV, SDLoc(Node), MemVT); NewOpc = SelectImm8Opcode(Opc); } else if (MemVT != MVT::i64 || isInt<32>(OperandV)) { Operand = CurDAG->getTargetConstant(OperandV, SDLoc(Node), MemVT); NewOpc = SelectImmOpcode(Opc); } } if (Opc == X86ISD::ADC || Opc == X86ISD::SBB) { SDValue CopyTo = CurDAG->getCopyToReg(InputChain, SDLoc(Node), X86::EFLAGS, StoredVal.getOperand(2), SDValue()); const SDValue Ops[] = {Base, Scale, Index, Disp, Segment, Operand, CopyTo, CopyTo.getValue(1)}; Result = CurDAG->getMachineNode(NewOpc, SDLoc(Node), MVT::i32, MVT::Other, Ops); } else { const SDValue Ops[] = {Base, Scale, Index, Disp, Segment, Operand, InputChain}; Result = CurDAG->getMachineNode(NewOpc, SDLoc(Node), MVT::i32, MVT::Other, Ops); } break; } default: llvm_unreachable("Invalid opcode!"); } MachineMemOperand *MemOps[] = {StoreNode->getMemOperand(), LoadNode->getMemOperand()}; CurDAG->setNodeMemRefs(Result, MemOps); // Update Load Chain uses as well. ReplaceUses(SDValue(LoadNode, 1), SDValue(Result, 1)); ReplaceUses(SDValue(StoreNode, 0), SDValue(Result, 1)); ReplaceUses(SDValue(StoredVal.getNode(), 1), SDValue(Result, 0)); CurDAG->RemoveDeadNode(Node); return true; } // See if this is an X & Mask that we can match to BEXTR/BZHI. // Where Mask is one of the following patterns: // a) x & (1 << nbits) - 1 // b) x & ~(-1 << nbits) // c) x & (-1 >> (32 - y)) // d) x << (32 - y) >> (32 - y) bool X86DAGToDAGISel::matchBitExtract(SDNode *Node) { assert( (Node->getOpcode() == ISD::AND || Node->getOpcode() == ISD::SRL) && "Should be either an and-mask, or right-shift after clearing high bits."); // BEXTR is BMI instruction, BZHI is BMI2 instruction. We need at least one. if (!Subtarget->hasBMI() && !Subtarget->hasBMI2()) return false; MVT NVT = Node->getSimpleValueType(0); // Only supported for 32 and 64 bits. if (NVT != MVT::i32 && NVT != MVT::i64) return false; SDValue NBits; // If we have BMI2's BZHI, we are ok with muti-use patterns. // Else, if we only have BMI1's BEXTR, we require one-use. const bool CanHaveExtraUses = Subtarget->hasBMI2(); auto checkUses = [CanHaveExtraUses](SDValue Op, unsigned NUses) { return CanHaveExtraUses || Op.getNode()->hasNUsesOfValue(NUses, Op.getResNo()); }; auto checkOneUse = [checkUses](SDValue Op) { return checkUses(Op, 1); }; auto checkTwoUse = [checkUses](SDValue Op) { return checkUses(Op, 2); }; auto peekThroughOneUseTruncation = [checkOneUse](SDValue V) { if (V->getOpcode() == ISD::TRUNCATE && checkOneUse(V)) { assert(V.getSimpleValueType() == MVT::i32 && V.getOperand(0).getSimpleValueType() == MVT::i64 && "Expected i64 -> i32 truncation"); V = V.getOperand(0); } return V; }; // a) x & ((1 << nbits) + (-1)) auto matchPatternA = [checkOneUse, peekThroughOneUseTruncation, &NBits](SDValue Mask) -> bool { // Match `add`. Must only have one use! if (Mask->getOpcode() != ISD::ADD || !checkOneUse(Mask)) return false; // We should be adding all-ones constant (i.e. subtracting one.) if (!isAllOnesConstant(Mask->getOperand(1))) return false; // Match `1 << nbits`. Might be truncated. Must only have one use! SDValue M0 = peekThroughOneUseTruncation(Mask->getOperand(0)); if (M0->getOpcode() != ISD::SHL || !checkOneUse(M0)) return false; if (!isOneConstant(M0->getOperand(0))) return false; NBits = M0->getOperand(1); return true; }; auto isAllOnes = [this, peekThroughOneUseTruncation, NVT](SDValue V) { V = peekThroughOneUseTruncation(V); return CurDAG->MaskedValueIsAllOnes( V, APInt::getLowBitsSet(V.getSimpleValueType().getSizeInBits(), NVT.getSizeInBits())); }; // b) x & ~(-1 << nbits) auto matchPatternB = [checkOneUse, isAllOnes, peekThroughOneUseTruncation, &NBits](SDValue Mask) -> bool { // Match `~()`. Must only have one use! if (Mask.getOpcode() != ISD::XOR || !checkOneUse(Mask)) return false; // The -1 only has to be all-ones for the final Node's NVT. if (!isAllOnes(Mask->getOperand(1))) return false; // Match `-1 << nbits`. Might be truncated. Must only have one use! SDValue M0 = peekThroughOneUseTruncation(Mask->getOperand(0)); if (M0->getOpcode() != ISD::SHL || !checkOneUse(M0)) return false; // The -1 only has to be all-ones for the final Node's NVT. if (!isAllOnes(M0->getOperand(0))) return false; NBits = M0->getOperand(1); return true; }; // Match potentially-truncated (bitwidth - y) auto matchShiftAmt = [checkOneUse, &NBits](SDValue ShiftAmt, unsigned Bitwidth) { // Skip over a truncate of the shift amount. if (ShiftAmt.getOpcode() == ISD::TRUNCATE) { ShiftAmt = ShiftAmt.getOperand(0); // The trunc should have been the only user of the real shift amount. if (!checkOneUse(ShiftAmt)) return false; } // Match the shift amount as: (bitwidth - y). It should go away, too. if (ShiftAmt.getOpcode() != ISD::SUB) return false; auto *V0 = dyn_cast(ShiftAmt.getOperand(0)); if (!V0 || V0->getZExtValue() != Bitwidth) return false; NBits = ShiftAmt.getOperand(1); return true; }; // c) x & (-1 >> (32 - y)) auto matchPatternC = [checkOneUse, peekThroughOneUseTruncation, matchShiftAmt](SDValue Mask) -> bool { // The mask itself may be truncated. Mask = peekThroughOneUseTruncation(Mask); unsigned Bitwidth = Mask.getSimpleValueType().getSizeInBits(); // Match `l>>`. Must only have one use! if (Mask.getOpcode() != ISD::SRL || !checkOneUse(Mask)) return false; // We should be shifting truly all-ones constant. if (!isAllOnesConstant(Mask.getOperand(0))) return false; SDValue M1 = Mask.getOperand(1); // The shift amount should not be used externally. if (!checkOneUse(M1)) return false; return matchShiftAmt(M1, Bitwidth); }; SDValue X; // d) x << (32 - y) >> (32 - y) auto matchPatternD = [checkOneUse, checkTwoUse, matchShiftAmt, &X](SDNode *Node) -> bool { if (Node->getOpcode() != ISD::SRL) return false; SDValue N0 = Node->getOperand(0); if (N0->getOpcode() != ISD::SHL || !checkOneUse(N0)) return false; unsigned Bitwidth = N0.getSimpleValueType().getSizeInBits(); SDValue N1 = Node->getOperand(1); SDValue N01 = N0->getOperand(1); // Both of the shifts must be by the exact same value. // There should not be any uses of the shift amount outside of the pattern. if (N1 != N01 || !checkTwoUse(N1)) return false; if (!matchShiftAmt(N1, Bitwidth)) return false; X = N0->getOperand(0); return true; }; auto matchLowBitMask = [matchPatternA, matchPatternB, matchPatternC](SDValue Mask) -> bool { return matchPatternA(Mask) || matchPatternB(Mask) || matchPatternC(Mask); }; if (Node->getOpcode() == ISD::AND) { X = Node->getOperand(0); SDValue Mask = Node->getOperand(1); if (matchLowBitMask(Mask)) { // Great. } else { std::swap(X, Mask); if (!matchLowBitMask(Mask)) return false; } } else if (!matchPatternD(Node)) return false; SDLoc DL(Node); // Truncate the shift amount. NBits = CurDAG->getNode(ISD::TRUNCATE, DL, MVT::i8, NBits); insertDAGNode(*CurDAG, SDValue(Node, 0), NBits); // Insert 8-bit NBits into lowest 8 bits of 32-bit register. // All the other bits are undefined, we do not care about them. SDValue ImplDef = SDValue( CurDAG->getMachineNode(TargetOpcode::IMPLICIT_DEF, DL, MVT::i32), 0); insertDAGNode(*CurDAG, SDValue(Node, 0), ImplDef); SDValue SRIdxVal = CurDAG->getTargetConstant(X86::sub_8bit, DL, MVT::i32); insertDAGNode(*CurDAG, SDValue(Node, 0), SRIdxVal); NBits = SDValue( CurDAG->getMachineNode(TargetOpcode::INSERT_SUBREG, DL, MVT::i32, ImplDef, NBits, SRIdxVal), 0); insertDAGNode(*CurDAG, SDValue(Node, 0), NBits); if (Subtarget->hasBMI2()) { // Great, just emit the the BZHI.. if (NVT != MVT::i32) { // But have to place the bit count into the wide-enough register first. NBits = CurDAG->getNode(ISD::ANY_EXTEND, DL, NVT, NBits); insertDAGNode(*CurDAG, SDValue(Node, 0), NBits); } SDValue Extract = CurDAG->getNode(X86ISD::BZHI, DL, NVT, X, NBits); ReplaceNode(Node, Extract.getNode()); SelectCode(Extract.getNode()); return true; } // Else, if we do *NOT* have BMI2, let's find out if the if the 'X' is // *logically* shifted (potentially with one-use trunc inbetween), // and the truncation was the only use of the shift, // and if so look past one-use truncation. { SDValue RealX = peekThroughOneUseTruncation(X); // FIXME: only if the shift is one-use? if (RealX != X && RealX.getOpcode() == ISD::SRL) X = RealX; } MVT XVT = X.getSimpleValueType(); // Else, emitting BEXTR requires one more step. // The 'control' of BEXTR has the pattern of: // [15...8 bit][ 7...0 bit] location // [ bit count][ shift] name // I.e. 0b000000011'00000001 means (x >> 0b1) & 0b11 // Shift NBits left by 8 bits, thus producing 'control'. // This makes the low 8 bits to be zero. SDValue C8 = CurDAG->getConstant(8, DL, MVT::i8); insertDAGNode(*CurDAG, SDValue(Node, 0), C8); SDValue Control = CurDAG->getNode(ISD::SHL, DL, MVT::i32, NBits, C8); insertDAGNode(*CurDAG, SDValue(Node, 0), Control); // If the 'X' is *logically* shifted, we can fold that shift into 'control'. // FIXME: only if the shift is one-use? if (X.getOpcode() == ISD::SRL) { SDValue ShiftAmt = X.getOperand(1); X = X.getOperand(0); assert(ShiftAmt.getValueType() == MVT::i8 && "Expected shift amount to be i8"); // Now, *zero*-extend the shift amount. The bits 8...15 *must* be zero! // We could zext to i16 in some form, but we intentionally don't do that. SDValue OrigShiftAmt = ShiftAmt; ShiftAmt = CurDAG->getNode(ISD::ZERO_EXTEND, DL, MVT::i32, ShiftAmt); insertDAGNode(*CurDAG, OrigShiftAmt, ShiftAmt); // And now 'or' these low 8 bits of shift amount into the 'control'. Control = CurDAG->getNode(ISD::OR, DL, MVT::i32, Control, ShiftAmt); insertDAGNode(*CurDAG, SDValue(Node, 0), Control); } // But have to place the 'control' into the wide-enough register first. if (XVT != MVT::i32) { Control = CurDAG->getNode(ISD::ANY_EXTEND, DL, XVT, Control); insertDAGNode(*CurDAG, SDValue(Node, 0), Control); } // And finally, form the BEXTR itself. SDValue Extract = CurDAG->getNode(X86ISD::BEXTR, DL, XVT, X, Control); // The 'X' was originally truncated. Do that now. if (XVT != NVT) { insertDAGNode(*CurDAG, SDValue(Node, 0), Extract); Extract = CurDAG->getNode(ISD::TRUNCATE, DL, NVT, Extract); } ReplaceNode(Node, Extract.getNode()); SelectCode(Extract.getNode()); return true; } // See if this is an (X >> C1) & C2 that we can match to BEXTR/BEXTRI. MachineSDNode *X86DAGToDAGISel::matchBEXTRFromAndImm(SDNode *Node) { MVT NVT = Node->getSimpleValueType(0); SDLoc dl(Node); SDValue N0 = Node->getOperand(0); SDValue N1 = Node->getOperand(1); // If we have TBM we can use an immediate for the control. If we have BMI // we should only do this if the BEXTR instruction is implemented well. // Otherwise moving the control into a register makes this more costly. // TODO: Maybe load folding, greater than 32-bit masks, or a guarantee of LICM // hoisting the move immediate would make it worthwhile with a less optimal // BEXTR? bool PreferBEXTR = Subtarget->hasTBM() || (Subtarget->hasBMI() && Subtarget->hasFastBEXTR()); if (!PreferBEXTR && !Subtarget->hasBMI2()) return nullptr; // Must have a shift right. if (N0->getOpcode() != ISD::SRL && N0->getOpcode() != ISD::SRA) return nullptr; // Shift can't have additional users. if (!N0->hasOneUse()) return nullptr; // Only supported for 32 and 64 bits. if (NVT != MVT::i32 && NVT != MVT::i64) return nullptr; // Shift amount and RHS of and must be constant. ConstantSDNode *MaskCst = dyn_cast(N1); ConstantSDNode *ShiftCst = dyn_cast(N0->getOperand(1)); if (!MaskCst || !ShiftCst) return nullptr; // And RHS must be a mask. uint64_t Mask = MaskCst->getZExtValue(); if (!isMask_64(Mask)) return nullptr; uint64_t Shift = ShiftCst->getZExtValue(); uint64_t MaskSize = countPopulation(Mask); // Don't interfere with something that can be handled by extracting AH. // TODO: If we are able to fold a load, BEXTR might still be better than AH. if (Shift == 8 && MaskSize == 8) return nullptr; // Make sure we are only using bits that were in the original value, not // shifted in. if (Shift + MaskSize > NVT.getSizeInBits()) return nullptr; // BZHI, if available, is always fast, unlike BEXTR. But even if we decide // that we can't use BEXTR, it is only worthwhile using BZHI if the mask // does not fit into 32 bits. Load folding is not a sufficient reason. if (!PreferBEXTR && MaskSize <= 32) return nullptr; SDValue Control; unsigned ROpc, MOpc; if (!PreferBEXTR) { assert(Subtarget->hasBMI2() && "We must have BMI2's BZHI then."); // If we can't make use of BEXTR then we can't fuse shift+mask stages. // Let's perform the mask first, and apply shift later. Note that we need to // widen the mask to account for the fact that we'll apply shift afterwards! Control = CurDAG->getTargetConstant(Shift + MaskSize, dl, NVT); ROpc = NVT == MVT::i64 ? X86::BZHI64rr : X86::BZHI32rr; MOpc = NVT == MVT::i64 ? X86::BZHI64rm : X86::BZHI32rm; unsigned NewOpc = NVT == MVT::i64 ? X86::MOV32ri64 : X86::MOV32ri; Control = SDValue(CurDAG->getMachineNode(NewOpc, dl, NVT, Control), 0); } else { // The 'control' of BEXTR has the pattern of: // [15...8 bit][ 7...0 bit] location // [ bit count][ shift] name // I.e. 0b000000011'00000001 means (x >> 0b1) & 0b11 Control = CurDAG->getTargetConstant(Shift | (MaskSize << 8), dl, NVT); if (Subtarget->hasTBM()) { ROpc = NVT == MVT::i64 ? X86::BEXTRI64ri : X86::BEXTRI32ri; MOpc = NVT == MVT::i64 ? X86::BEXTRI64mi : X86::BEXTRI32mi; } else { assert(Subtarget->hasBMI() && "We must have BMI1's BEXTR then."); // BMI requires the immediate to placed in a register. ROpc = NVT == MVT::i64 ? X86::BEXTR64rr : X86::BEXTR32rr; MOpc = NVT == MVT::i64 ? X86::BEXTR64rm : X86::BEXTR32rm; unsigned NewOpc = NVT == MVT::i64 ? X86::MOV32ri64 : X86::MOV32ri; Control = SDValue(CurDAG->getMachineNode(NewOpc, dl, NVT, Control), 0); } } MachineSDNode *NewNode; SDValue Input = N0->getOperand(0); SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; if (tryFoldLoad(Node, N0.getNode(), Input, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) { SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Control, Input.getOperand(0)}; SDVTList VTs = CurDAG->getVTList(NVT, MVT::i32, MVT::Other); NewNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops); // Update the chain. ReplaceUses(Input.getValue(1), SDValue(NewNode, 2)); // Record the mem-refs CurDAG->setNodeMemRefs(NewNode, {cast(Input)->getMemOperand()}); } else { NewNode = CurDAG->getMachineNode(ROpc, dl, NVT, MVT::i32, Input, Control); } if (!PreferBEXTR) { // We still need to apply the shift. SDValue ShAmt = CurDAG->getTargetConstant(Shift, dl, NVT); unsigned NewOpc = NVT == MVT::i64 ? X86::SHR64ri : X86::SHR32ri; NewNode = CurDAG->getMachineNode(NewOpc, dl, NVT, SDValue(NewNode, 0), ShAmt); } return NewNode; } // Emit a PCMISTR(I/M) instruction. MachineSDNode *X86DAGToDAGISel::emitPCMPISTR(unsigned ROpc, unsigned MOpc, bool MayFoldLoad, const SDLoc &dl, MVT VT, SDNode *Node) { SDValue N0 = Node->getOperand(0); SDValue N1 = Node->getOperand(1); SDValue Imm = Node->getOperand(2); const ConstantInt *Val = cast(Imm)->getConstantIntValue(); Imm = CurDAG->getTargetConstant(*Val, SDLoc(Node), Imm.getValueType()); // Try to fold a load. No need to check alignment. SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; if (MayFoldLoad && tryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) { SDValue Ops[] = { N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Imm, N1.getOperand(0) }; SDVTList VTs = CurDAG->getVTList(VT, MVT::i32, MVT::Other); MachineSDNode *CNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops); // Update the chain. ReplaceUses(N1.getValue(1), SDValue(CNode, 2)); // Record the mem-refs CurDAG->setNodeMemRefs(CNode, {cast(N1)->getMemOperand()}); return CNode; } SDValue Ops[] = { N0, N1, Imm }; SDVTList VTs = CurDAG->getVTList(VT, MVT::i32); MachineSDNode *CNode = CurDAG->getMachineNode(ROpc, dl, VTs, Ops); return CNode; } // Emit a PCMESTR(I/M) instruction. Also return the Glue result in case we need // to emit a second instruction after this one. This is needed since we have two // copyToReg nodes glued before this and we need to continue that glue through. MachineSDNode *X86DAGToDAGISel::emitPCMPESTR(unsigned ROpc, unsigned MOpc, bool MayFoldLoad, const SDLoc &dl, MVT VT, SDNode *Node, SDValue &InFlag) { SDValue N0 = Node->getOperand(0); SDValue N2 = Node->getOperand(2); SDValue Imm = Node->getOperand(4); const ConstantInt *Val = cast(Imm)->getConstantIntValue(); Imm = CurDAG->getTargetConstant(*Val, SDLoc(Node), Imm.getValueType()); // Try to fold a load. No need to check alignment. SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; if (MayFoldLoad && tryFoldLoad(Node, N2, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) { SDValue Ops[] = { N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Imm, N2.getOperand(0), InFlag }; SDVTList VTs = CurDAG->getVTList(VT, MVT::i32, MVT::Other, MVT::Glue); MachineSDNode *CNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops); InFlag = SDValue(CNode, 3); // Update the chain. ReplaceUses(N2.getValue(1), SDValue(CNode, 2)); // Record the mem-refs CurDAG->setNodeMemRefs(CNode, {cast(N2)->getMemOperand()}); return CNode; } SDValue Ops[] = { N0, N2, Imm, InFlag }; SDVTList VTs = CurDAG->getVTList(VT, MVT::i32, MVT::Glue); MachineSDNode *CNode = CurDAG->getMachineNode(ROpc, dl, VTs, Ops); InFlag = SDValue(CNode, 2); return CNode; } bool X86DAGToDAGISel::tryShiftAmountMod(SDNode *N) { EVT VT = N->getValueType(0); // Only handle scalar shifts. if (VT.isVector()) return false; // Narrower shifts only mask to 5 bits in hardware. unsigned Size = VT == MVT::i64 ? 64 : 32; SDValue OrigShiftAmt = N->getOperand(1); SDValue ShiftAmt = OrigShiftAmt; SDLoc DL(N); // Skip over a truncate of the shift amount. if (ShiftAmt->getOpcode() == ISD::TRUNCATE) ShiftAmt = ShiftAmt->getOperand(0); // This function is called after X86DAGToDAGISel::matchBitExtract(), // so we are not afraid that we might mess up BZHI/BEXTR pattern. SDValue NewShiftAmt; if (ShiftAmt->getOpcode() == ISD::ADD || ShiftAmt->getOpcode() == ISD::SUB) { SDValue Add0 = ShiftAmt->getOperand(0); SDValue Add1 = ShiftAmt->getOperand(1); // If we are shifting by X+/-N where N == 0 mod Size, then just shift by X // to avoid the ADD/SUB. if (isa(Add1) && cast(Add1)->getZExtValue() % Size == 0) { NewShiftAmt = Add0; // If we are shifting by N-X where N == 0 mod Size, then just shift by -X to // generate a NEG instead of a SUB of a constant. } else if (ShiftAmt->getOpcode() == ISD::SUB && isa(Add0) && cast(Add0)->getZExtValue() != 0 && cast(Add0)->getZExtValue() % Size == 0) { // Insert a negate op. // TODO: This isn't guaranteed to replace the sub if there is a logic cone // that uses it that's not a shift. EVT SubVT = ShiftAmt.getValueType(); SDValue Zero = CurDAG->getConstant(0, DL, SubVT); SDValue Neg = CurDAG->getNode(ISD::SUB, DL, SubVT, Zero, Add1); NewShiftAmt = Neg; // Insert these operands into a valid topological order so they can // get selected independently. insertDAGNode(*CurDAG, OrigShiftAmt, Zero); insertDAGNode(*CurDAG, OrigShiftAmt, Neg); } else return false; } else return false; if (NewShiftAmt.getValueType() != MVT::i8) { // Need to truncate the shift amount. NewShiftAmt = CurDAG->getNode(ISD::TRUNCATE, DL, MVT::i8, NewShiftAmt); // Add to a correct topological ordering. insertDAGNode(*CurDAG, OrigShiftAmt, NewShiftAmt); } // Insert a new mask to keep the shift amount legal. This should be removed // by isel patterns. NewShiftAmt = CurDAG->getNode(ISD::AND, DL, MVT::i8, NewShiftAmt, CurDAG->getConstant(Size - 1, DL, MVT::i8)); // Place in a correct topological ordering. insertDAGNode(*CurDAG, OrigShiftAmt, NewShiftAmt); SDNode *UpdatedNode = CurDAG->UpdateNodeOperands(N, N->getOperand(0), NewShiftAmt); if (UpdatedNode != N) { // If we found an existing node, we should replace ourselves with that node // and wait for it to be selected after its other users. ReplaceNode(N, UpdatedNode); return true; } // If the original shift amount is now dead, delete it so that we don't run // it through isel. if (OrigShiftAmt.getNode()->use_empty()) CurDAG->RemoveDeadNode(OrigShiftAmt.getNode()); // Now that we've optimized the shift amount, defer to normal isel to get // load folding and legacy vs BMI2 selection without repeating it here. SelectCode(N); return true; } bool X86DAGToDAGISel::tryShrinkShlLogicImm(SDNode *N) { MVT NVT = N->getSimpleValueType(0); unsigned Opcode = N->getOpcode(); SDLoc dl(N); // For operations of the form (x << C1) op C2, check if we can use a smaller // encoding for C2 by transforming it into (x op (C2>>C1)) << C1. SDValue Shift = N->getOperand(0); SDValue N1 = N->getOperand(1); ConstantSDNode *Cst = dyn_cast(N1); if (!Cst) return false; int64_t Val = Cst->getSExtValue(); // If we have an any_extend feeding the AND, look through it to see if there // is a shift behind it. But only if the AND doesn't use the extended bits. // FIXME: Generalize this to other ANY_EXTEND than i32 to i64? bool FoundAnyExtend = false; if (Shift.getOpcode() == ISD::ANY_EXTEND && Shift.hasOneUse() && Shift.getOperand(0).getSimpleValueType() == MVT::i32 && isUInt<32>(Val)) { FoundAnyExtend = true; Shift = Shift.getOperand(0); } if (Shift.getOpcode() != ISD::SHL || !Shift.hasOneUse()) return false; // i8 is unshrinkable, i16 should be promoted to i32. if (NVT != MVT::i32 && NVT != MVT::i64) return false; ConstantSDNode *ShlCst = dyn_cast(Shift.getOperand(1)); if (!ShlCst) return false; uint64_t ShAmt = ShlCst->getZExtValue(); // Make sure that we don't change the operation by removing bits. // This only matters for OR and XOR, AND is unaffected. uint64_t RemovedBitsMask = (1ULL << ShAmt) - 1; if (Opcode != ISD::AND && (Val & RemovedBitsMask) != 0) return false; // Check the minimum bitwidth for the new constant. // TODO: Using 16 and 8 bit operations is also possible for or32 & xor32. auto CanShrinkImmediate = [&](int64_t &ShiftedVal) { if (Opcode == ISD::AND) { // AND32ri is the same as AND64ri32 with zext imm. // Try this before sign extended immediates below. ShiftedVal = (uint64_t)Val >> ShAmt; if (NVT == MVT::i64 && !isUInt<32>(Val) && isUInt<32>(ShiftedVal)) return true; // Also swap order when the AND can become MOVZX. if (ShiftedVal == UINT8_MAX || ShiftedVal == UINT16_MAX) return true; } ShiftedVal = Val >> ShAmt; if ((!isInt<8>(Val) && isInt<8>(ShiftedVal)) || (!isInt<32>(Val) && isInt<32>(ShiftedVal))) return true; if (Opcode != ISD::AND) { // MOV32ri+OR64r/XOR64r is cheaper than MOV64ri64+OR64rr/XOR64rr ShiftedVal = (uint64_t)Val >> ShAmt; if (NVT == MVT::i64 && !isUInt<32>(Val) && isUInt<32>(ShiftedVal)) return true; } return false; }; int64_t ShiftedVal; if (!CanShrinkImmediate(ShiftedVal)) return false; // Ok, we can reorder to get a smaller immediate. // But, its possible the original immediate allowed an AND to become MOVZX. // Doing this late due to avoid the MakedValueIsZero call as late as // possible. if (Opcode == ISD::AND) { // Find the smallest zext this could possibly be. unsigned ZExtWidth = Cst->getAPIntValue().getActiveBits(); ZExtWidth = PowerOf2Ceil(std::max(ZExtWidth, 8U)); // Figure out which bits need to be zero to achieve that mask. APInt NeededMask = APInt::getLowBitsSet(NVT.getSizeInBits(), ZExtWidth); NeededMask &= ~Cst->getAPIntValue(); if (CurDAG->MaskedValueIsZero(N->getOperand(0), NeededMask)) return false; } SDValue X = Shift.getOperand(0); if (FoundAnyExtend) { SDValue NewX = CurDAG->getNode(ISD::ANY_EXTEND, dl, NVT, X); insertDAGNode(*CurDAG, SDValue(N, 0), NewX); X = NewX; } SDValue NewCst = CurDAG->getConstant(ShiftedVal, dl, NVT); insertDAGNode(*CurDAG, SDValue(N, 0), NewCst); SDValue NewBinOp = CurDAG->getNode(Opcode, dl, NVT, X, NewCst); insertDAGNode(*CurDAG, SDValue(N, 0), NewBinOp); SDValue NewSHL = CurDAG->getNode(ISD::SHL, dl, NVT, NewBinOp, Shift.getOperand(1)); ReplaceNode(N, NewSHL.getNode()); SelectCode(NewSHL.getNode()); return true; } bool X86DAGToDAGISel::matchVPTERNLOG(SDNode *Root, SDNode *ParentA, SDNode *ParentBC, SDValue A, SDValue B, SDValue C, uint8_t Imm) { assert(A.isOperandOf(ParentA)); assert(B.isOperandOf(ParentBC)); assert(C.isOperandOf(ParentBC)); auto tryFoldLoadOrBCast = [this](SDNode *Root, SDNode *P, SDValue &L, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { if (tryFoldLoad(Root, P, L, Base, Scale, Index, Disp, Segment)) return true; // Not a load, check for broadcast which may be behind a bitcast. if (L.getOpcode() == ISD::BITCAST && L.hasOneUse()) { P = L.getNode(); L = L.getOperand(0); } if (L.getOpcode() != X86ISD::VBROADCAST_LOAD) return false; // Only 32 and 64 bit broadcasts are supported. auto *MemIntr = cast(L); unsigned Size = MemIntr->getMemoryVT().getSizeInBits(); if (Size != 32 && Size != 64) return false; return tryFoldBroadcast(Root, P, L, Base, Scale, Index, Disp, Segment); }; bool FoldedLoad = false; SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; if (tryFoldLoadOrBCast(Root, ParentBC, C, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) { FoldedLoad = true; } else if (tryFoldLoadOrBCast(Root, ParentA, A, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) { FoldedLoad = true; std::swap(A, C); // Swap bits 1/4 and 3/6. uint8_t OldImm = Imm; Imm = OldImm & 0xa5; if (OldImm & 0x02) Imm |= 0x10; if (OldImm & 0x10) Imm |= 0x02; if (OldImm & 0x08) Imm |= 0x40; if (OldImm & 0x40) Imm |= 0x08; } else if (tryFoldLoadOrBCast(Root, ParentBC, B, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) { FoldedLoad = true; std::swap(B, C); // Swap bits 1/2 and 5/6. uint8_t OldImm = Imm; Imm = OldImm & 0x99; if (OldImm & 0x02) Imm |= 0x04; if (OldImm & 0x04) Imm |= 0x02; if (OldImm & 0x20) Imm |= 0x40; if (OldImm & 0x40) Imm |= 0x20; } SDLoc DL(Root); SDValue TImm = CurDAG->getTargetConstant(Imm, DL, MVT::i8); MVT NVT = Root->getSimpleValueType(0); MachineSDNode *MNode; if (FoldedLoad) { SDVTList VTs = CurDAG->getVTList(NVT, MVT::Other); unsigned Opc; if (C.getOpcode() == X86ISD::VBROADCAST_LOAD) { auto *MemIntr = cast(C); unsigned EltSize = MemIntr->getMemoryVT().getSizeInBits(); assert((EltSize == 32 || EltSize == 64) && "Unexpected broadcast size!"); bool UseD = EltSize == 32; if (NVT.is128BitVector()) Opc = UseD ? X86::VPTERNLOGDZ128rmbi : X86::VPTERNLOGQZ128rmbi; else if (NVT.is256BitVector()) Opc = UseD ? X86::VPTERNLOGDZ256rmbi : X86::VPTERNLOGQZ256rmbi; else if (NVT.is512BitVector()) Opc = UseD ? X86::VPTERNLOGDZrmbi : X86::VPTERNLOGQZrmbi; else llvm_unreachable("Unexpected vector size!"); } else { bool UseD = NVT.getVectorElementType() == MVT::i32; if (NVT.is128BitVector()) Opc = UseD ? X86::VPTERNLOGDZ128rmi : X86::VPTERNLOGQZ128rmi; else if (NVT.is256BitVector()) Opc = UseD ? X86::VPTERNLOGDZ256rmi : X86::VPTERNLOGQZ256rmi; else if (NVT.is512BitVector()) Opc = UseD ? X86::VPTERNLOGDZrmi : X86::VPTERNLOGQZrmi; else llvm_unreachable("Unexpected vector size!"); } SDValue Ops[] = {A, B, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, TImm, C.getOperand(0)}; MNode = CurDAG->getMachineNode(Opc, DL, VTs, Ops); // Update the chain. ReplaceUses(C.getValue(1), SDValue(MNode, 1)); // Record the mem-refs CurDAG->setNodeMemRefs(MNode, {cast(C)->getMemOperand()}); } else { bool UseD = NVT.getVectorElementType() == MVT::i32; unsigned Opc; if (NVT.is128BitVector()) Opc = UseD ? X86::VPTERNLOGDZ128rri : X86::VPTERNLOGQZ128rri; else if (NVT.is256BitVector()) Opc = UseD ? X86::VPTERNLOGDZ256rri : X86::VPTERNLOGQZ256rri; else if (NVT.is512BitVector()) Opc = UseD ? X86::VPTERNLOGDZrri : X86::VPTERNLOGQZrri; else llvm_unreachable("Unexpected vector size!"); MNode = CurDAG->getMachineNode(Opc, DL, NVT, {A, B, C, TImm}); } ReplaceUses(SDValue(Root, 0), SDValue(MNode, 0)); CurDAG->RemoveDeadNode(Root); return true; } // Try to match two logic ops to a VPTERNLOG. // FIXME: Handle inverted inputs? // FIXME: Handle more complex patterns that use an operand more than once? bool X86DAGToDAGISel::tryVPTERNLOG(SDNode *N) { MVT NVT = N->getSimpleValueType(0); // Make sure we support VPTERNLOG. if (!NVT.isVector() || !Subtarget->hasAVX512() || NVT.getVectorElementType() == MVT::i1) return false; // We need VLX for 128/256-bit. if (!(Subtarget->hasVLX() || NVT.is512BitVector())) return false; SDValue N0 = N->getOperand(0); SDValue N1 = N->getOperand(1); auto getFoldableLogicOp = [](SDValue Op) { // Peek through single use bitcast. if (Op.getOpcode() == ISD::BITCAST && Op.hasOneUse()) Op = Op.getOperand(0); if (!Op.hasOneUse()) return SDValue(); unsigned Opc = Op.getOpcode(); if (Opc == ISD::AND || Opc == ISD::OR || Opc == ISD::XOR || Opc == X86ISD::ANDNP) return Op; return SDValue(); }; SDValue A, FoldableOp; if ((FoldableOp = getFoldableLogicOp(N1))) { A = N0; } else if ((FoldableOp = getFoldableLogicOp(N0))) { A = N1; } else return false; SDValue B = FoldableOp.getOperand(0); SDValue C = FoldableOp.getOperand(1); // We can build the appropriate control immediate by performing the logic // operation we're matching using these constants for A, B, and C. const uint8_t TernlogMagicA = 0xf0; const uint8_t TernlogMagicB = 0xcc; const uint8_t TernlogMagicC = 0xaa; uint8_t Imm; switch (FoldableOp.getOpcode()) { default: llvm_unreachable("Unexpected opcode!"); case ISD::AND: Imm = TernlogMagicB & TernlogMagicC; break; case ISD::OR: Imm = TernlogMagicB | TernlogMagicC; break; case ISD::XOR: Imm = TernlogMagicB ^ TernlogMagicC; break; case X86ISD::ANDNP: Imm = ~(TernlogMagicB) & TernlogMagicC; break; } switch (N->getOpcode()) { default: llvm_unreachable("Unexpected opcode!"); case X86ISD::ANDNP: if (A == N0) Imm &= ~TernlogMagicA; else Imm = ~(Imm) & TernlogMagicA; break; case ISD::AND: Imm &= TernlogMagicA; break; case ISD::OR: Imm |= TernlogMagicA; break; case ISD::XOR: Imm ^= TernlogMagicA; break; } return matchVPTERNLOG(N, N, FoldableOp.getNode(), A, B, C, Imm); } /// If the high bits of an 'and' operand are known zero, try setting the /// high bits of an 'and' constant operand to produce a smaller encoding by /// creating a small, sign-extended negative immediate rather than a large /// positive one. This reverses a transform in SimplifyDemandedBits that /// shrinks mask constants by clearing bits. There is also a possibility that /// the 'and' mask can be made -1, so the 'and' itself is unnecessary. In that /// case, just replace the 'and'. Return 'true' if the node is replaced. bool X86DAGToDAGISel::shrinkAndImmediate(SDNode *And) { // i8 is unshrinkable, i16 should be promoted to i32, and vector ops don't // have immediate operands. MVT VT = And->getSimpleValueType(0); if (VT != MVT::i32 && VT != MVT::i64) return false; auto *And1C = dyn_cast(And->getOperand(1)); if (!And1C) return false; // Bail out if the mask constant is already negative. It's can't shrink more. // If the upper 32 bits of a 64 bit mask are all zeros, we have special isel // patterns to use a 32-bit and instead of a 64-bit and by relying on the // implicit zeroing of 32 bit ops. So we should check if the lower 32 bits // are negative too. APInt MaskVal = And1C->getAPIntValue(); unsigned MaskLZ = MaskVal.countLeadingZeros(); if (!MaskLZ || (VT == MVT::i64 && MaskLZ == 32)) return false; // Don't extend into the upper 32 bits of a 64 bit mask. if (VT == MVT::i64 && MaskLZ >= 32) { MaskLZ -= 32; MaskVal = MaskVal.trunc(32); } SDValue And0 = And->getOperand(0); APInt HighZeros = APInt::getHighBitsSet(MaskVal.getBitWidth(), MaskLZ); APInt NegMaskVal = MaskVal | HighZeros; // If a negative constant would not allow a smaller encoding, there's no need // to continue. Only change the constant when we know it's a win. unsigned MinWidth = NegMaskVal.getMinSignedBits(); if (MinWidth > 32 || (MinWidth > 8 && MaskVal.getMinSignedBits() <= 32)) return false; // Extend masks if we truncated above. if (VT == MVT::i64 && MaskVal.getBitWidth() < 64) { NegMaskVal = NegMaskVal.zext(64); HighZeros = HighZeros.zext(64); } // The variable operand must be all zeros in the top bits to allow using the // new, negative constant as the mask. if (!CurDAG->MaskedValueIsZero(And0, HighZeros)) return false; // Check if the mask is -1. In that case, this is an unnecessary instruction // that escaped earlier analysis. if (NegMaskVal.isAllOnesValue()) { ReplaceNode(And, And0.getNode()); return true; } // A negative mask allows a smaller encoding. Create a new 'and' node. SDValue NewMask = CurDAG->getConstant(NegMaskVal, SDLoc(And), VT); SDValue NewAnd = CurDAG->getNode(ISD::AND, SDLoc(And), VT, And0, NewMask); ReplaceNode(And, NewAnd.getNode()); SelectCode(NewAnd.getNode()); return true; } static unsigned getVPTESTMOpc(MVT TestVT, bool IsTestN, bool FoldedLoad, bool FoldedBCast, bool Masked) { #define VPTESTM_CASE(VT, SUFFIX) \ case MVT::VT: \ if (Masked) \ return IsTestN ? X86::VPTESTNM##SUFFIX##k: X86::VPTESTM##SUFFIX##k; \ return IsTestN ? X86::VPTESTNM##SUFFIX : X86::VPTESTM##SUFFIX; #define VPTESTM_BROADCAST_CASES(SUFFIX) \ default: llvm_unreachable("Unexpected VT!"); \ VPTESTM_CASE(v4i32, DZ128##SUFFIX) \ VPTESTM_CASE(v2i64, QZ128##SUFFIX) \ VPTESTM_CASE(v8i32, DZ256##SUFFIX) \ VPTESTM_CASE(v4i64, QZ256##SUFFIX) \ VPTESTM_CASE(v16i32, DZ##SUFFIX) \ VPTESTM_CASE(v8i64, QZ##SUFFIX) #define VPTESTM_FULL_CASES(SUFFIX) \ VPTESTM_BROADCAST_CASES(SUFFIX) \ VPTESTM_CASE(v16i8, BZ128##SUFFIX) \ VPTESTM_CASE(v8i16, WZ128##SUFFIX) \ VPTESTM_CASE(v32i8, BZ256##SUFFIX) \ VPTESTM_CASE(v16i16, WZ256##SUFFIX) \ VPTESTM_CASE(v64i8, BZ##SUFFIX) \ VPTESTM_CASE(v32i16, WZ##SUFFIX) if (FoldedBCast) { switch (TestVT.SimpleTy) { VPTESTM_BROADCAST_CASES(rmb) } } if (FoldedLoad) { switch (TestVT.SimpleTy) { VPTESTM_FULL_CASES(rm) } } switch (TestVT.SimpleTy) { VPTESTM_FULL_CASES(rr) } #undef VPTESTM_FULL_CASES #undef VPTESTM_BROADCAST_CASES #undef VPTESTM_CASE } // Try to create VPTESTM instruction. If InMask is not null, it will be used // to form a masked operation. bool X86DAGToDAGISel::tryVPTESTM(SDNode *Root, SDValue Setcc, SDValue InMask) { assert(Subtarget->hasAVX512() && "Expected AVX512!"); assert(Setcc.getSimpleValueType().getVectorElementType() == MVT::i1 && "Unexpected VT!"); // Look for equal and not equal compares. ISD::CondCode CC = cast(Setcc.getOperand(2))->get(); if (CC != ISD::SETEQ && CC != ISD::SETNE) return false; SDValue SetccOp0 = Setcc.getOperand(0); SDValue SetccOp1 = Setcc.getOperand(1); // Canonicalize the all zero vector to the RHS. if (ISD::isBuildVectorAllZeros(SetccOp0.getNode())) std::swap(SetccOp0, SetccOp1); // See if we're comparing against zero. if (!ISD::isBuildVectorAllZeros(SetccOp1.getNode())) return false; SDValue N0 = SetccOp0; MVT CmpVT = N0.getSimpleValueType(); MVT CmpSVT = CmpVT.getVectorElementType(); // Start with both operands the same. We'll try to refine this. SDValue Src0 = N0; SDValue Src1 = N0; { // Look through single use bitcasts. SDValue N0Temp = N0; if (N0Temp.getOpcode() == ISD::BITCAST && N0Temp.hasOneUse()) N0Temp = N0.getOperand(0); // Look for single use AND. if (N0Temp.getOpcode() == ISD::AND && N0Temp.hasOneUse()) { Src0 = N0Temp.getOperand(0); Src1 = N0Temp.getOperand(1); } } // Without VLX we need to widen the operation. bool Widen = !Subtarget->hasVLX() && !CmpVT.is512BitVector(); auto tryFoldLoadOrBCast = [&](SDNode *Root, SDNode *P, SDValue &L, SDValue &Base, SDValue &Scale, SDValue &Index, SDValue &Disp, SDValue &Segment) { // If we need to widen, we can't fold the load. if (!Widen) if (tryFoldLoad(Root, P, L, Base, Scale, Index, Disp, Segment)) return true; // If we didn't fold a load, try to match broadcast. No widening limitation // for this. But only 32 and 64 bit types are supported. if (CmpSVT != MVT::i32 && CmpSVT != MVT::i64) return false; // Look through single use bitcasts. if (L.getOpcode() == ISD::BITCAST && L.hasOneUse()) { P = L.getNode(); L = L.getOperand(0); } if (L.getOpcode() != X86ISD::VBROADCAST_LOAD) return false; auto *MemIntr = cast(L); if (MemIntr->getMemoryVT().getSizeInBits() != CmpSVT.getSizeInBits()) return false; return tryFoldBroadcast(Root, P, L, Base, Scale, Index, Disp, Segment); }; // We can only fold loads if the sources are unique. bool CanFoldLoads = Src0 != Src1; bool FoldedLoad = false; SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; if (CanFoldLoads) { FoldedLoad = tryFoldLoadOrBCast(Root, N0.getNode(), Src1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4); if (!FoldedLoad) { // And is commutative. FoldedLoad = tryFoldLoadOrBCast(Root, N0.getNode(), Src0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4); if (FoldedLoad) std::swap(Src0, Src1); } } bool FoldedBCast = FoldedLoad && Src1.getOpcode() == X86ISD::VBROADCAST_LOAD; bool IsMasked = InMask.getNode() != nullptr; SDLoc dl(Root); MVT ResVT = Setcc.getSimpleValueType(); MVT MaskVT = ResVT; if (Widen) { // Widen the inputs using insert_subreg or copy_to_regclass. unsigned Scale = CmpVT.is128BitVector() ? 4 : 2; unsigned SubReg = CmpVT.is128BitVector() ? X86::sub_xmm : X86::sub_ymm; unsigned NumElts = CmpVT.getVectorNumElements() * Scale; CmpVT = MVT::getVectorVT(CmpSVT, NumElts); MaskVT = MVT::getVectorVT(MVT::i1, NumElts); SDValue ImplDef = SDValue(CurDAG->getMachineNode(X86::IMPLICIT_DEF, dl, CmpVT), 0); Src0 = CurDAG->getTargetInsertSubreg(SubReg, dl, CmpVT, ImplDef, Src0); if (!FoldedBCast) Src1 = CurDAG->getTargetInsertSubreg(SubReg, dl, CmpVT, ImplDef, Src1); if (IsMasked) { // Widen the mask. unsigned RegClass = TLI->getRegClassFor(MaskVT)->getID(); SDValue RC = CurDAG->getTargetConstant(RegClass, dl, MVT::i32); InMask = SDValue(CurDAG->getMachineNode(TargetOpcode::COPY_TO_REGCLASS, dl, MaskVT, InMask, RC), 0); } } bool IsTestN = CC == ISD::SETEQ; unsigned Opc = getVPTESTMOpc(CmpVT, IsTestN, FoldedLoad, FoldedBCast, IsMasked); MachineSDNode *CNode; if (FoldedLoad) { SDVTList VTs = CurDAG->getVTList(MaskVT, MVT::Other); if (IsMasked) { SDValue Ops[] = { InMask, Src0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Src1.getOperand(0) }; CNode = CurDAG->getMachineNode(Opc, dl, VTs, Ops); } else { SDValue Ops[] = { Src0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Src1.getOperand(0) }; CNode = CurDAG->getMachineNode(Opc, dl, VTs, Ops); } // Update the chain. ReplaceUses(Src1.getValue(1), SDValue(CNode, 1)); // Record the mem-refs CurDAG->setNodeMemRefs(CNode, {cast(Src1)->getMemOperand()}); } else { if (IsMasked) CNode = CurDAG->getMachineNode(Opc, dl, MaskVT, InMask, Src0, Src1); else CNode = CurDAG->getMachineNode(Opc, dl, MaskVT, Src0, Src1); } // If we widened, we need to shrink the mask VT. if (Widen) { unsigned RegClass = TLI->getRegClassFor(ResVT)->getID(); SDValue RC = CurDAG->getTargetConstant(RegClass, dl, MVT::i32); CNode = CurDAG->getMachineNode(TargetOpcode::COPY_TO_REGCLASS, dl, ResVT, SDValue(CNode, 0), RC); } ReplaceUses(SDValue(Root, 0), SDValue(CNode, 0)); CurDAG->RemoveDeadNode(Root); return true; } // Try to match the bitselect pattern (or (and A, B), (andn A, C)). Turn it // into vpternlog. bool X86DAGToDAGISel::tryMatchBitSelect(SDNode *N) { assert(N->getOpcode() == ISD::OR && "Unexpected opcode!"); MVT NVT = N->getSimpleValueType(0); // Make sure we support VPTERNLOG. if (!NVT.isVector() || !Subtarget->hasAVX512()) return false; // We need VLX for 128/256-bit. if (!(Subtarget->hasVLX() || NVT.is512BitVector())) return false; SDValue N0 = N->getOperand(0); SDValue N1 = N->getOperand(1); // Canonicalize AND to LHS. if (N1.getOpcode() == ISD::AND) std::swap(N0, N1); if (N0.getOpcode() != ISD::AND || N1.getOpcode() != X86ISD::ANDNP || !N0.hasOneUse() || !N1.hasOneUse()) return false; // ANDN is not commutable, use it to pick down A and C. SDValue A = N1.getOperand(0); SDValue C = N1.getOperand(1); // AND is commutable, if one operand matches A, the other operand is B. // Otherwise this isn't a match. SDValue B; if (N0.getOperand(0) == A) B = N0.getOperand(1); else if (N0.getOperand(1) == A) B = N0.getOperand(0); else return false; SDLoc dl(N); SDValue Imm = CurDAG->getTargetConstant(0xCA, dl, MVT::i8); SDValue Ternlog = CurDAG->getNode(X86ISD::VPTERNLOG, dl, NVT, A, B, C, Imm); ReplaceNode(N, Ternlog.getNode()); return matchVPTERNLOG(Ternlog.getNode(), Ternlog.getNode(), Ternlog.getNode(), A, B, C, 0xCA); } void X86DAGToDAGISel::Select(SDNode *Node) { MVT NVT = Node->getSimpleValueType(0); unsigned Opcode = Node->getOpcode(); SDLoc dl(Node); if (Node->isMachineOpcode()) { LLVM_DEBUG(dbgs() << "== "; Node->dump(CurDAG); dbgs() << '\n'); Node->setNodeId(-1); return; // Already selected. } switch (Opcode) { default: break; case ISD::INTRINSIC_W_CHAIN: { unsigned IntNo = Node->getConstantOperandVal(1); switch (IntNo) { default: break; case Intrinsic::x86_encodekey128: case Intrinsic::x86_encodekey256: { if (!Subtarget->hasKL()) break; unsigned Opcode; switch (IntNo) { default: llvm_unreachable("Impossible intrinsic"); case Intrinsic::x86_encodekey128: Opcode = X86::ENCODEKEY128; break; case Intrinsic::x86_encodekey256: Opcode = X86::ENCODEKEY256; break; } SDValue Chain = Node->getOperand(0); Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM0, Node->getOperand(3), SDValue()); if (Opcode == X86::ENCODEKEY256) Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM1, Node->getOperand(4), Chain.getValue(1)); MachineSDNode *Res = CurDAG->getMachineNode( Opcode, dl, Node->getVTList(), {Node->getOperand(2), Chain, Chain.getValue(1)}); ReplaceNode(Node, Res); return; } } break; } case ISD::INTRINSIC_VOID: { unsigned IntNo = Node->getConstantOperandVal(1); switch (IntNo) { default: break; case Intrinsic::x86_sse3_monitor: case Intrinsic::x86_monitorx: case Intrinsic::x86_clzero: { bool Use64BitPtr = Node->getOperand(2).getValueType() == MVT::i64; unsigned Opc = 0; switch (IntNo) { default: llvm_unreachable("Unexpected intrinsic!"); case Intrinsic::x86_sse3_monitor: if (!Subtarget->hasSSE3()) break; Opc = Use64BitPtr ? X86::MONITOR64rrr : X86::MONITOR32rrr; break; case Intrinsic::x86_monitorx: if (!Subtarget->hasMWAITX()) break; Opc = Use64BitPtr ? X86::MONITORX64rrr : X86::MONITORX32rrr; break; case Intrinsic::x86_clzero: if (!Subtarget->hasCLZERO()) break; Opc = Use64BitPtr ? X86::CLZERO64r : X86::CLZERO32r; break; } if (Opc) { unsigned PtrReg = Use64BitPtr ? X86::RAX : X86::EAX; SDValue Chain = CurDAG->getCopyToReg(Node->getOperand(0), dl, PtrReg, Node->getOperand(2), SDValue()); SDValue InFlag = Chain.getValue(1); if (IntNo == Intrinsic::x86_sse3_monitor || IntNo == Intrinsic::x86_monitorx) { // Copy the other two operands to ECX and EDX. Chain = CurDAG->getCopyToReg(Chain, dl, X86::ECX, Node->getOperand(3), InFlag); InFlag = Chain.getValue(1); Chain = CurDAG->getCopyToReg(Chain, dl, X86::EDX, Node->getOperand(4), InFlag); InFlag = Chain.getValue(1); } MachineSDNode *CNode = CurDAG->getMachineNode(Opc, dl, MVT::Other, { Chain, InFlag}); ReplaceNode(Node, CNode); return; } break; } case Intrinsic::x86_tileloadd64: case Intrinsic::x86_tileloaddt164: case Intrinsic::x86_tilestored64: { if (!Subtarget->hasAMXTILE()) break; unsigned Opc; switch (IntNo) { default: llvm_unreachable("Unexpected intrinsic!"); case Intrinsic::x86_tileloadd64: Opc = X86::PTILELOADD; break; case Intrinsic::x86_tileloaddt164: Opc = X86::PTILELOADDT1; break; case Intrinsic::x86_tilestored64: Opc = X86::PTILESTORED; break; } // FIXME: Match displacement and scale. unsigned TIndex = Node->getConstantOperandVal(2); SDValue TReg = getI8Imm(TIndex, dl); SDValue Base = Node->getOperand(3); SDValue Scale = getI8Imm(1, dl); SDValue Index = Node->getOperand(4); SDValue Disp = CurDAG->getTargetConstant(0, dl, MVT::i32); SDValue Segment = CurDAG->getRegister(0, MVT::i16); SDValue Chain = Node->getOperand(0); MachineSDNode *CNode; if (Opc == X86::PTILESTORED) { SDValue Ops[] = { Base, Scale, Index, Disp, Segment, TReg, Chain }; CNode = CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops); } else { SDValue Ops[] = { TReg, Base, Scale, Index, Disp, Segment, Chain }; CNode = CurDAG->getMachineNode(Opc, dl, MVT::Other, Ops); } ReplaceNode(Node, CNode); return; } } break; } case ISD::BRIND: { if (Subtarget->isTargetNaCl()) // NaCl has its own pass where jmp %r32 are converted to jmp %r64. We // leave the instruction alone. break; if (Subtarget->isTarget64BitILP32()) { // Converts a 32-bit register to a 64-bit, zero-extended version of // it. This is needed because x86-64 can do many things, but jmp %r32 // ain't one of them. SDValue Target = Node->getOperand(1); assert(Target.getValueType() == MVT::i32 && "Unexpected VT!"); SDValue ZextTarget = CurDAG->getZExtOrTrunc(Target, dl, MVT::i64); SDValue Brind = CurDAG->getNode(ISD::BRIND, dl, MVT::Other, Node->getOperand(0), ZextTarget); ReplaceNode(Node, Brind.getNode()); SelectCode(ZextTarget.getNode()); SelectCode(Brind.getNode()); return; } break; } case X86ISD::GlobalBaseReg: ReplaceNode(Node, getGlobalBaseReg()); return; case ISD::BITCAST: // Just drop all 128/256/512-bit bitcasts. if (NVT.is512BitVector() || NVT.is256BitVector() || NVT.is128BitVector() || NVT == MVT::f128) { ReplaceUses(SDValue(Node, 0), Node->getOperand(0)); CurDAG->RemoveDeadNode(Node); return; } break; case ISD::SRL: if (matchBitExtract(Node)) return; LLVM_FALLTHROUGH; case ISD::SRA: case ISD::SHL: if (tryShiftAmountMod(Node)) return; break; case X86ISD::VPTERNLOG: { uint8_t Imm = cast(Node->getOperand(3))->getZExtValue(); if (matchVPTERNLOG(Node, Node, Node, Node->getOperand(0), Node->getOperand(1), Node->getOperand(2), Imm)) return; break; } case X86ISD::ANDNP: if (tryVPTERNLOG(Node)) return; break; case ISD::AND: if (NVT.isVector() && NVT.getVectorElementType() == MVT::i1) { // Try to form a masked VPTESTM. Operands can be in either order. SDValue N0 = Node->getOperand(0); SDValue N1 = Node->getOperand(1); if (N0.getOpcode() == ISD::SETCC && N0.hasOneUse() && tryVPTESTM(Node, N0, N1)) return; if (N1.getOpcode() == ISD::SETCC && N1.hasOneUse() && tryVPTESTM(Node, N1, N0)) return; } if (MachineSDNode *NewNode = matchBEXTRFromAndImm(Node)) { ReplaceUses(SDValue(Node, 0), SDValue(NewNode, 0)); CurDAG->RemoveDeadNode(Node); return; } if (matchBitExtract(Node)) return; if (AndImmShrink && shrinkAndImmediate(Node)) return; LLVM_FALLTHROUGH; case ISD::OR: case ISD::XOR: if (tryShrinkShlLogicImm(Node)) return; if (Opcode == ISD::OR && tryMatchBitSelect(Node)) return; if (tryVPTERNLOG(Node)) return; LLVM_FALLTHROUGH; case ISD::ADD: case ISD::SUB: { // Try to avoid folding immediates with multiple uses for optsize. // This code tries to select to register form directly to avoid going // through the isel table which might fold the immediate. We can't change // the patterns on the add/sub/and/or/xor with immediate paterns in the // tablegen files to check immediate use count without making the patterns // unavailable to the fast-isel table. if (!CurDAG->shouldOptForSize()) break; // Only handle i8/i16/i32/i64. if (NVT != MVT::i8 && NVT != MVT::i16 && NVT != MVT::i32 && NVT != MVT::i64) break; SDValue N0 = Node->getOperand(0); SDValue N1 = Node->getOperand(1); ConstantSDNode *Cst = dyn_cast(N1); if (!Cst) break; int64_t Val = Cst->getSExtValue(); // Make sure its an immediate that is considered foldable. // FIXME: Handle unsigned 32 bit immediates for 64-bit AND. if (!isInt<8>(Val) && !isInt<32>(Val)) break; // If this can match to INC/DEC, let it go. if (Opcode == ISD::ADD && (Val == 1 || Val == -1)) break; // Check if we should avoid folding this immediate. if (!shouldAvoidImmediateInstFormsForSize(N1.getNode())) break; // We should not fold the immediate. So we need a register form instead. unsigned ROpc, MOpc; switch (NVT.SimpleTy) { default: llvm_unreachable("Unexpected VT!"); case MVT::i8: switch (Opcode) { default: llvm_unreachable("Unexpected opcode!"); case ISD::ADD: ROpc = X86::ADD8rr; MOpc = X86::ADD8rm; break; case ISD::SUB: ROpc = X86::SUB8rr; MOpc = X86::SUB8rm; break; case ISD::AND: ROpc = X86::AND8rr; MOpc = X86::AND8rm; break; case ISD::OR: ROpc = X86::OR8rr; MOpc = X86::OR8rm; break; case ISD::XOR: ROpc = X86::XOR8rr; MOpc = X86::XOR8rm; break; } break; case MVT::i16: switch (Opcode) { default: llvm_unreachable("Unexpected opcode!"); case ISD::ADD: ROpc = X86::ADD16rr; MOpc = X86::ADD16rm; break; case ISD::SUB: ROpc = X86::SUB16rr; MOpc = X86::SUB16rm; break; case ISD::AND: ROpc = X86::AND16rr; MOpc = X86::AND16rm; break; case ISD::OR: ROpc = X86::OR16rr; MOpc = X86::OR16rm; break; case ISD::XOR: ROpc = X86::XOR16rr; MOpc = X86::XOR16rm; break; } break; case MVT::i32: switch (Opcode) { default: llvm_unreachable("Unexpected opcode!"); case ISD::ADD: ROpc = X86::ADD32rr; MOpc = X86::ADD32rm; break; case ISD::SUB: ROpc = X86::SUB32rr; MOpc = X86::SUB32rm; break; case ISD::AND: ROpc = X86::AND32rr; MOpc = X86::AND32rm; break; case ISD::OR: ROpc = X86::OR32rr; MOpc = X86::OR32rm; break; case ISD::XOR: ROpc = X86::XOR32rr; MOpc = X86::XOR32rm; break; } break; case MVT::i64: switch (Opcode) { default: llvm_unreachable("Unexpected opcode!"); case ISD::ADD: ROpc = X86::ADD64rr; MOpc = X86::ADD64rm; break; case ISD::SUB: ROpc = X86::SUB64rr; MOpc = X86::SUB64rm; break; case ISD::AND: ROpc = X86::AND64rr; MOpc = X86::AND64rm; break; case ISD::OR: ROpc = X86::OR64rr; MOpc = X86::OR64rm; break; case ISD::XOR: ROpc = X86::XOR64rr; MOpc = X86::XOR64rm; break; } break; } // Ok this is a AND/OR/XOR/ADD/SUB with constant. // If this is a not a subtract, we can still try to fold a load. if (Opcode != ISD::SUB) { SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; if (tryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) { SDValue Ops[] = { N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N0.getOperand(0) }; SDVTList VTs = CurDAG->getVTList(NVT, MVT::i32, MVT::Other); MachineSDNode *CNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops); // Update the chain. ReplaceUses(N0.getValue(1), SDValue(CNode, 2)); // Record the mem-refs CurDAG->setNodeMemRefs(CNode, {cast(N0)->getMemOperand()}); ReplaceUses(SDValue(Node, 0), SDValue(CNode, 0)); CurDAG->RemoveDeadNode(Node); return; } } CurDAG->SelectNodeTo(Node, ROpc, NVT, MVT::i32, N0, N1); return; } case X86ISD::SMUL: // i16/i32/i64 are handled with isel patterns. if (NVT != MVT::i8) break; LLVM_FALLTHROUGH; case X86ISD::UMUL: { SDValue N0 = Node->getOperand(0); SDValue N1 = Node->getOperand(1); unsigned LoReg, ROpc, MOpc; switch (NVT.SimpleTy) { default: llvm_unreachable("Unsupported VT!"); case MVT::i8: LoReg = X86::AL; ROpc = Opcode == X86ISD::SMUL ? X86::IMUL8r : X86::MUL8r; MOpc = Opcode == X86ISD::SMUL ? X86::IMUL8m : X86::MUL8m; break; case MVT::i16: LoReg = X86::AX; ROpc = X86::MUL16r; MOpc = X86::MUL16m; break; case MVT::i32: LoReg = X86::EAX; ROpc = X86::MUL32r; MOpc = X86::MUL32m; break; case MVT::i64: LoReg = X86::RAX; ROpc = X86::MUL64r; MOpc = X86::MUL64m; break; } SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; bool FoldedLoad = tryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4); // Multiply is commutative. if (!FoldedLoad) { FoldedLoad = tryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4); if (FoldedLoad) std::swap(N0, N1); } SDValue InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, LoReg, N0, SDValue()).getValue(1); MachineSDNode *CNode; if (FoldedLoad) { // i16/i32/i64 use an instruction that produces a low and high result even // though only the low result is used. SDVTList VTs; if (NVT == MVT::i8) VTs = CurDAG->getVTList(NVT, MVT::i32, MVT::Other); else VTs = CurDAG->getVTList(NVT, NVT, MVT::i32, MVT::Other); SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0), InFlag }; CNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops); // Update the chain. ReplaceUses(N1.getValue(1), SDValue(CNode, NVT == MVT::i8 ? 2 : 3)); // Record the mem-refs CurDAG->setNodeMemRefs(CNode, {cast(N1)->getMemOperand()}); } else { // i16/i32/i64 use an instruction that produces a low and high result even // though only the low result is used. SDVTList VTs; if (NVT == MVT::i8) VTs = CurDAG->getVTList(NVT, MVT::i32); else VTs = CurDAG->getVTList(NVT, NVT, MVT::i32); CNode = CurDAG->getMachineNode(ROpc, dl, VTs, {N1, InFlag}); } ReplaceUses(SDValue(Node, 0), SDValue(CNode, 0)); ReplaceUses(SDValue(Node, 1), SDValue(CNode, NVT == MVT::i8 ? 1 : 2)); CurDAG->RemoveDeadNode(Node); return; } case ISD::SMUL_LOHI: case ISD::UMUL_LOHI: { SDValue N0 = Node->getOperand(0); SDValue N1 = Node->getOperand(1); unsigned Opc, MOpc; unsigned LoReg, HiReg; bool IsSigned = Opcode == ISD::SMUL_LOHI; bool UseMULX = !IsSigned && Subtarget->hasBMI2(); bool UseMULXHi = UseMULX && SDValue(Node, 0).use_empty(); switch (NVT.SimpleTy) { default: llvm_unreachable("Unsupported VT!"); case MVT::i32: Opc = UseMULXHi ? X86::MULX32Hrr : UseMULX ? X86::MULX32rr : IsSigned ? X86::IMUL32r : X86::MUL32r; MOpc = UseMULXHi ? X86::MULX32Hrm : UseMULX ? X86::MULX32rm : IsSigned ? X86::IMUL32m : X86::MUL32m; LoReg = UseMULX ? X86::EDX : X86::EAX; HiReg = X86::EDX; break; case MVT::i64: Opc = UseMULXHi ? X86::MULX64Hrr : UseMULX ? X86::MULX64rr : IsSigned ? X86::IMUL64r : X86::MUL64r; MOpc = UseMULXHi ? X86::MULX64Hrm : UseMULX ? X86::MULX64rm : IsSigned ? X86::IMUL64m : X86::MUL64m; LoReg = UseMULX ? X86::RDX : X86::RAX; HiReg = X86::RDX; break; } SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; bool foldedLoad = tryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4); // Multiply is commmutative. if (!foldedLoad) { foldedLoad = tryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4); if (foldedLoad) std::swap(N0, N1); } SDValue InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, LoReg, N0, SDValue()).getValue(1); SDValue ResHi, ResLo; if (foldedLoad) { SDValue Chain; MachineSDNode *CNode = nullptr; SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0), InFlag }; if (UseMULXHi) { SDVTList VTs = CurDAG->getVTList(NVT, MVT::Other); CNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops); ResHi = SDValue(CNode, 0); Chain = SDValue(CNode, 1); } else if (UseMULX) { SDVTList VTs = CurDAG->getVTList(NVT, NVT, MVT::Other); CNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops); ResHi = SDValue(CNode, 0); ResLo = SDValue(CNode, 1); Chain = SDValue(CNode, 2); } else { SDVTList VTs = CurDAG->getVTList(MVT::Other, MVT::Glue); CNode = CurDAG->getMachineNode(MOpc, dl, VTs, Ops); Chain = SDValue(CNode, 0); InFlag = SDValue(CNode, 1); } // Update the chain. ReplaceUses(N1.getValue(1), Chain); // Record the mem-refs CurDAG->setNodeMemRefs(CNode, {cast(N1)->getMemOperand()}); } else { SDValue Ops[] = { N1, InFlag }; if (UseMULXHi) { SDVTList VTs = CurDAG->getVTList(NVT); SDNode *CNode = CurDAG->getMachineNode(Opc, dl, VTs, Ops); ResHi = SDValue(CNode, 0); } else if (UseMULX) { SDVTList VTs = CurDAG->getVTList(NVT, NVT); SDNode *CNode = CurDAG->getMachineNode(Opc, dl, VTs, Ops); ResHi = SDValue(CNode, 0); ResLo = SDValue(CNode, 1); } else { SDVTList VTs = CurDAG->getVTList(MVT::Glue); SDNode *CNode = CurDAG->getMachineNode(Opc, dl, VTs, Ops); InFlag = SDValue(CNode, 0); } } // Copy the low half of the result, if it is needed. if (!SDValue(Node, 0).use_empty()) { if (!ResLo) { assert(LoReg && "Register for low half is not defined!"); ResLo = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl, LoReg, NVT, InFlag); InFlag = ResLo.getValue(2); } ReplaceUses(SDValue(Node, 0), ResLo); LLVM_DEBUG(dbgs() << "=> "; ResLo.getNode()->dump(CurDAG); dbgs() << '\n'); } // Copy the high half of the result, if it is needed. if (!SDValue(Node, 1).use_empty()) { if (!ResHi) { assert(HiReg && "Register for high half is not defined!"); ResHi = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl, HiReg, NVT, InFlag); InFlag = ResHi.getValue(2); } ReplaceUses(SDValue(Node, 1), ResHi); LLVM_DEBUG(dbgs() << "=> "; ResHi.getNode()->dump(CurDAG); dbgs() << '\n'); } CurDAG->RemoveDeadNode(Node); return; } case ISD::SDIVREM: case ISD::UDIVREM: { SDValue N0 = Node->getOperand(0); SDValue N1 = Node->getOperand(1); unsigned ROpc, MOpc; bool isSigned = Opcode == ISD::SDIVREM; if (!isSigned) { switch (NVT.SimpleTy) { default: llvm_unreachable("Unsupported VT!"); case MVT::i8: ROpc = X86::DIV8r; MOpc = X86::DIV8m; break; case MVT::i16: ROpc = X86::DIV16r; MOpc = X86::DIV16m; break; case MVT::i32: ROpc = X86::DIV32r; MOpc = X86::DIV32m; break; case MVT::i64: ROpc = X86::DIV64r; MOpc = X86::DIV64m; break; } } else { switch (NVT.SimpleTy) { default: llvm_unreachable("Unsupported VT!"); case MVT::i8: ROpc = X86::IDIV8r; MOpc = X86::IDIV8m; break; case MVT::i16: ROpc = X86::IDIV16r; MOpc = X86::IDIV16m; break; case MVT::i32: ROpc = X86::IDIV32r; MOpc = X86::IDIV32m; break; case MVT::i64: ROpc = X86::IDIV64r; MOpc = X86::IDIV64m; break; } } unsigned LoReg, HiReg, ClrReg; unsigned SExtOpcode; switch (NVT.SimpleTy) { default: llvm_unreachable("Unsupported VT!"); case MVT::i8: LoReg = X86::AL; ClrReg = HiReg = X86::AH; SExtOpcode = 0; // Not used. break; case MVT::i16: LoReg = X86::AX; HiReg = X86::DX; ClrReg = X86::DX; SExtOpcode = X86::CWD; break; case MVT::i32: LoReg = X86::EAX; ClrReg = HiReg = X86::EDX; SExtOpcode = X86::CDQ; break; case MVT::i64: LoReg = X86::RAX; ClrReg = HiReg = X86::RDX; SExtOpcode = X86::CQO; break; } SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; bool foldedLoad = tryFoldLoad(Node, N1, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4); bool signBitIsZero = CurDAG->SignBitIsZero(N0); SDValue InFlag; if (NVT == MVT::i8) { // Special case for div8, just use a move with zero extension to AX to // clear the upper 8 bits (AH). SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Chain; MachineSDNode *Move; if (tryFoldLoad(Node, N0, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) { SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N0.getOperand(0) }; unsigned Opc = (isSigned && !signBitIsZero) ? X86::MOVSX16rm8 : X86::MOVZX16rm8; Move = CurDAG->getMachineNode(Opc, dl, MVT::i16, MVT::Other, Ops); Chain = SDValue(Move, 1); ReplaceUses(N0.getValue(1), Chain); // Record the mem-refs CurDAG->setNodeMemRefs(Move, {cast(N0)->getMemOperand()}); } else { unsigned Opc = (isSigned && !signBitIsZero) ? X86::MOVSX16rr8 : X86::MOVZX16rr8; Move = CurDAG->getMachineNode(Opc, dl, MVT::i16, N0); Chain = CurDAG->getEntryNode(); } Chain = CurDAG->getCopyToReg(Chain, dl, X86::AX, SDValue(Move, 0), SDValue()); InFlag = Chain.getValue(1); } else { InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, LoReg, N0, SDValue()).getValue(1); if (isSigned && !signBitIsZero) { // Sign extend the low part into the high part. InFlag = SDValue(CurDAG->getMachineNode(SExtOpcode, dl, MVT::Glue, InFlag),0); } else { // Zero out the high part, effectively zero extending the input. SDVTList VTs = CurDAG->getVTList(MVT::i32, MVT::i32); SDValue ClrNode = SDValue(CurDAG->getMachineNode(X86::MOV32r0, dl, VTs, None), 0); switch (NVT.SimpleTy) { case MVT::i16: ClrNode = SDValue(CurDAG->getMachineNode( TargetOpcode::EXTRACT_SUBREG, dl, MVT::i16, ClrNode, CurDAG->getTargetConstant(X86::sub_16bit, dl, MVT::i32)), 0); break; case MVT::i32: break; case MVT::i64: ClrNode = SDValue(CurDAG->getMachineNode( TargetOpcode::SUBREG_TO_REG, dl, MVT::i64, CurDAG->getTargetConstant(0, dl, MVT::i64), ClrNode, CurDAG->getTargetConstant(X86::sub_32bit, dl, MVT::i32)), 0); break; default: llvm_unreachable("Unexpected division source"); } InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, ClrReg, ClrNode, InFlag).getValue(1); } } if (foldedLoad) { SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, N1.getOperand(0), InFlag }; MachineSDNode *CNode = CurDAG->getMachineNode(MOpc, dl, MVT::Other, MVT::Glue, Ops); InFlag = SDValue(CNode, 1); // Update the chain. ReplaceUses(N1.getValue(1), SDValue(CNode, 0)); // Record the mem-refs CurDAG->setNodeMemRefs(CNode, {cast(N1)->getMemOperand()}); } else { InFlag = SDValue(CurDAG->getMachineNode(ROpc, dl, MVT::Glue, N1, InFlag), 0); } // Prevent use of AH in a REX instruction by explicitly copying it to // an ABCD_L register. // // The current assumption of the register allocator is that isel // won't generate explicit references to the GR8_ABCD_H registers. If // the allocator and/or the backend get enhanced to be more robust in // that regard, this can be, and should be, removed. if (HiReg == X86::AH && !SDValue(Node, 1).use_empty()) { SDValue AHCopy = CurDAG->getRegister(X86::AH, MVT::i8); unsigned AHExtOpcode = isSigned ? X86::MOVSX32rr8_NOREX : X86::MOVZX32rr8_NOREX; SDNode *RNode = CurDAG->getMachineNode(AHExtOpcode, dl, MVT::i32, MVT::Glue, AHCopy, InFlag); SDValue Result(RNode, 0); InFlag = SDValue(RNode, 1); Result = CurDAG->getTargetExtractSubreg(X86::sub_8bit, dl, MVT::i8, Result); ReplaceUses(SDValue(Node, 1), Result); LLVM_DEBUG(dbgs() << "=> "; Result.getNode()->dump(CurDAG); dbgs() << '\n'); } // Copy the division (low) result, if it is needed. if (!SDValue(Node, 0).use_empty()) { SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl, LoReg, NVT, InFlag); InFlag = Result.getValue(2); ReplaceUses(SDValue(Node, 0), Result); LLVM_DEBUG(dbgs() << "=> "; Result.getNode()->dump(CurDAG); dbgs() << '\n'); } // Copy the remainder (high) result, if it is needed. if (!SDValue(Node, 1).use_empty()) { SDValue Result = CurDAG->getCopyFromReg(CurDAG->getEntryNode(), dl, HiReg, NVT, InFlag); InFlag = Result.getValue(2); ReplaceUses(SDValue(Node, 1), Result); LLVM_DEBUG(dbgs() << "=> "; Result.getNode()->dump(CurDAG); dbgs() << '\n'); } CurDAG->RemoveDeadNode(Node); return; } case X86ISD::FCMP: case X86ISD::STRICT_FCMP: case X86ISD::STRICT_FCMPS: { bool IsStrictCmp = Node->getOpcode() == X86ISD::STRICT_FCMP || Node->getOpcode() == X86ISD::STRICT_FCMPS; SDValue N0 = Node->getOperand(IsStrictCmp ? 1 : 0); SDValue N1 = Node->getOperand(IsStrictCmp ? 2 : 1); // Save the original VT of the compare. MVT CmpVT = N0.getSimpleValueType(); // Floating point needs special handling if we don't have FCOMI. if (Subtarget->hasCMov()) break; bool IsSignaling = Node->getOpcode() == X86ISD::STRICT_FCMPS; unsigned Opc; switch (CmpVT.SimpleTy) { default: llvm_unreachable("Unexpected type!"); case MVT::f32: Opc = IsSignaling ? X86::COM_Fpr32 : X86::UCOM_Fpr32; break; case MVT::f64: Opc = IsSignaling ? X86::COM_Fpr64 : X86::UCOM_Fpr64; break; case MVT::f80: Opc = IsSignaling ? X86::COM_Fpr80 : X86::UCOM_Fpr80; break; } SDValue Cmp; SDValue Chain = IsStrictCmp ? Node->getOperand(0) : CurDAG->getEntryNode(); if (IsStrictCmp) { SDVTList VTs = CurDAG->getVTList(MVT::i16, MVT::Other); Cmp = SDValue(CurDAG->getMachineNode(Opc, dl, VTs, {N0, N1, Chain}), 0); Chain = Cmp.getValue(1); } else { Cmp = SDValue(CurDAG->getMachineNode(Opc, dl, MVT::i16, N0, N1), 0); } // Move FPSW to AX. SDValue FPSW = CurDAG->getCopyToReg(Chain, dl, X86::FPSW, Cmp, SDValue()); Chain = FPSW; SDValue FNSTSW = SDValue(CurDAG->getMachineNode(X86::FNSTSW16r, dl, MVT::i16, FPSW, FPSW.getValue(1)), 0); // Extract upper 8-bits of AX. SDValue Extract = CurDAG->getTargetExtractSubreg(X86::sub_8bit_hi, dl, MVT::i8, FNSTSW); // Move AH into flags. // Some 64-bit targets lack SAHF support, but they do support FCOMI. assert(Subtarget->hasLAHFSAHF() && "Target doesn't support SAHF or FCOMI?"); SDValue AH = CurDAG->getCopyToReg(Chain, dl, X86::AH, Extract, SDValue()); Chain = AH; SDValue SAHF = SDValue( CurDAG->getMachineNode(X86::SAHF, dl, MVT::i32, AH.getValue(1)), 0); if (IsStrictCmp) ReplaceUses(SDValue(Node, 1), Chain); ReplaceUses(SDValue(Node, 0), SAHF); CurDAG->RemoveDeadNode(Node); return; } case X86ISD::CMP: { SDValue N0 = Node->getOperand(0); SDValue N1 = Node->getOperand(1); // Optimizations for TEST compares. if (!isNullConstant(N1)) break; // Save the original VT of the compare. MVT CmpVT = N0.getSimpleValueType(); // If we are comparing (and (shr X, C, Mask) with 0, emit a BEXTR followed // by a test instruction. The test should be removed later by // analyzeCompare if we are using only the zero flag. // TODO: Should we check the users and use the BEXTR flags directly? if (N0.getOpcode() == ISD::AND && N0.hasOneUse()) { if (MachineSDNode *NewNode = matchBEXTRFromAndImm(N0.getNode())) { unsigned TestOpc = CmpVT == MVT::i64 ? X86::TEST64rr : X86::TEST32rr; SDValue BEXTR = SDValue(NewNode, 0); NewNode = CurDAG->getMachineNode(TestOpc, dl, MVT::i32, BEXTR, BEXTR); ReplaceUses(SDValue(Node, 0), SDValue(NewNode, 0)); CurDAG->RemoveDeadNode(Node); return; } } // We can peek through truncates, but we need to be careful below. if (N0.getOpcode() == ISD::TRUNCATE && N0.hasOneUse()) N0 = N0.getOperand(0); // Look for (X86cmp (and $op, $imm), 0) and see if we can convert it to // use a smaller encoding. // Look past the truncate if CMP is the only use of it. if (N0.getOpcode() == ISD::AND && N0.getNode()->hasOneUse() && N0.getValueType() != MVT::i8) { ConstantSDNode *C = dyn_cast(N0.getOperand(1)); if (!C) break; uint64_t Mask = C->getZExtValue(); // Check if we can replace AND+IMM64 with a shift. This is possible for // masks/ like 0xFF000000 or 0x00FFFFFF and if we care only about the zero // flag. if (CmpVT == MVT::i64 && !isInt<32>(Mask) && onlyUsesZeroFlag(SDValue(Node, 0))) { if (isMask_64(~Mask)) { unsigned TrailingZeros = countTrailingZeros(Mask); SDValue Imm = CurDAG->getTargetConstant(TrailingZeros, dl, MVT::i64); SDValue Shift = SDValue(CurDAG->getMachineNode(X86::SHR64ri, dl, MVT::i64, MVT::i32, N0.getOperand(0), Imm), 0); MachineSDNode *Test = CurDAG->getMachineNode(X86::TEST64rr, dl, MVT::i32, Shift, Shift); ReplaceNode(Node, Test); return; } if (isMask_64(Mask)) { unsigned LeadingZeros = countLeadingZeros(Mask); SDValue Imm = CurDAG->getTargetConstant(LeadingZeros, dl, MVT::i64); SDValue Shift = SDValue(CurDAG->getMachineNode(X86::SHL64ri, dl, MVT::i64, MVT::i32, N0.getOperand(0), Imm), 0); MachineSDNode *Test = CurDAG->getMachineNode(X86::TEST64rr, dl, MVT::i32, Shift, Shift); ReplaceNode(Node, Test); return; } } MVT VT; int SubRegOp; unsigned ROpc, MOpc; // For each of these checks we need to be careful if the sign flag is // being used. It is only safe to use the sign flag in two conditions, // either the sign bit in the shrunken mask is zero or the final test // size is equal to the original compare size. if (isUInt<8>(Mask) && (!(Mask & 0x80) || CmpVT == MVT::i8 || hasNoSignFlagUses(SDValue(Node, 0)))) { // For example, convert "testl %eax, $8" to "testb %al, $8" VT = MVT::i8; SubRegOp = X86::sub_8bit; ROpc = X86::TEST8ri; MOpc = X86::TEST8mi; } else if (OptForMinSize && isUInt<16>(Mask) && (!(Mask & 0x8000) || CmpVT == MVT::i16 || hasNoSignFlagUses(SDValue(Node, 0)))) { // For example, "testl %eax, $32776" to "testw %ax, $32776". // NOTE: We only want to form TESTW instructions if optimizing for // min size. Otherwise we only save one byte and possibly get a length // changing prefix penalty in the decoders. VT = MVT::i16; SubRegOp = X86::sub_16bit; ROpc = X86::TEST16ri; MOpc = X86::TEST16mi; } else if (isUInt<32>(Mask) && N0.getValueType() != MVT::i16 && ((!(Mask & 0x80000000) && // Without minsize 16-bit Cmps can get here so we need to // be sure we calculate the correct sign flag if needed. (CmpVT != MVT::i16 || !(Mask & 0x8000))) || CmpVT == MVT::i32 || hasNoSignFlagUses(SDValue(Node, 0)))) { // For example, "testq %rax, $268468232" to "testl %eax, $268468232". // NOTE: We only want to run that transform if N0 is 32 or 64 bits. // Otherwize, we find ourselves in a position where we have to do // promotion. If previous passes did not promote the and, we assume // they had a good reason not to and do not promote here. VT = MVT::i32; SubRegOp = X86::sub_32bit; ROpc = X86::TEST32ri; MOpc = X86::TEST32mi; } else { // No eligible transformation was found. break; } SDValue Imm = CurDAG->getTargetConstant(Mask, dl, VT); SDValue Reg = N0.getOperand(0); // Emit a testl or testw. MachineSDNode *NewNode; SDValue Tmp0, Tmp1, Tmp2, Tmp3, Tmp4; if (tryFoldLoad(Node, N0.getNode(), Reg, Tmp0, Tmp1, Tmp2, Tmp3, Tmp4)) { if (auto *LoadN = dyn_cast(N0.getOperand(0).getNode())) { if (!LoadN->isSimple()) { unsigned NumVolBits = LoadN->getValueType(0).getSizeInBits(); if (MOpc == X86::TEST8mi && NumVolBits != 8) break; else if (MOpc == X86::TEST16mi && NumVolBits != 16) break; else if (MOpc == X86::TEST32mi && NumVolBits != 32) break; } } SDValue Ops[] = { Tmp0, Tmp1, Tmp2, Tmp3, Tmp4, Imm, Reg.getOperand(0) }; NewNode = CurDAG->getMachineNode(MOpc, dl, MVT::i32, MVT::Other, Ops); // Update the chain. ReplaceUses(Reg.getValue(1), SDValue(NewNode, 1)); // Record the mem-refs CurDAG->setNodeMemRefs(NewNode, {cast(Reg)->getMemOperand()}); } else { // Extract the subregister if necessary. if (N0.getValueType() != VT) Reg = CurDAG->getTargetExtractSubreg(SubRegOp, dl, VT, Reg); NewNode = CurDAG->getMachineNode(ROpc, dl, MVT::i32, Reg, Imm); } // Replace CMP with TEST. ReplaceNode(Node, NewNode); return; } break; } case X86ISD::PCMPISTR: { if (!Subtarget->hasSSE42()) break; bool NeedIndex = !SDValue(Node, 0).use_empty(); bool NeedMask = !SDValue(Node, 1).use_empty(); // We can't fold a load if we are going to make two instructions. bool MayFoldLoad = !NeedIndex || !NeedMask; MachineSDNode *CNode; if (NeedMask) { unsigned ROpc = Subtarget->hasAVX() ? X86::VPCMPISTRMrr : X86::PCMPISTRMrr; unsigned MOpc = Subtarget->hasAVX() ? X86::VPCMPISTRMrm : X86::PCMPISTRMrm; CNode = emitPCMPISTR(ROpc, MOpc, MayFoldLoad, dl, MVT::v16i8, Node); ReplaceUses(SDValue(Node, 1), SDValue(CNode, 0)); } if (NeedIndex || !NeedMask) { unsigned ROpc = Subtarget->hasAVX() ? X86::VPCMPISTRIrr : X86::PCMPISTRIrr; unsigned MOpc = Subtarget->hasAVX() ? X86::VPCMPISTRIrm : X86::PCMPISTRIrm; CNode = emitPCMPISTR(ROpc, MOpc, MayFoldLoad, dl, MVT::i32, Node); ReplaceUses(SDValue(Node, 0), SDValue(CNode, 0)); } // Connect the flag usage to the last instruction created. ReplaceUses(SDValue(Node, 2), SDValue(CNode, 1)); CurDAG->RemoveDeadNode(Node); return; } case X86ISD::PCMPESTR: { if (!Subtarget->hasSSE42()) break; // Copy the two implicit register inputs. SDValue InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, X86::EAX, Node->getOperand(1), SDValue()).getValue(1); InFlag = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, X86::EDX, Node->getOperand(3), InFlag).getValue(1); bool NeedIndex = !SDValue(Node, 0).use_empty(); bool NeedMask = !SDValue(Node, 1).use_empty(); // We can't fold a load if we are going to make two instructions. bool MayFoldLoad = !NeedIndex || !NeedMask; MachineSDNode *CNode; if (NeedMask) { unsigned ROpc = Subtarget->hasAVX() ? X86::VPCMPESTRMrr : X86::PCMPESTRMrr; unsigned MOpc = Subtarget->hasAVX() ? X86::VPCMPESTRMrm : X86::PCMPESTRMrm; CNode = emitPCMPESTR(ROpc, MOpc, MayFoldLoad, dl, MVT::v16i8, Node, InFlag); ReplaceUses(SDValue(Node, 1), SDValue(CNode, 0)); } if (NeedIndex || !NeedMask) { unsigned ROpc = Subtarget->hasAVX() ? X86::VPCMPESTRIrr : X86::PCMPESTRIrr; unsigned MOpc = Subtarget->hasAVX() ? X86::VPCMPESTRIrm : X86::PCMPESTRIrm; CNode = emitPCMPESTR(ROpc, MOpc, MayFoldLoad, dl, MVT::i32, Node, InFlag); ReplaceUses(SDValue(Node, 0), SDValue(CNode, 0)); } // Connect the flag usage to the last instruction created. ReplaceUses(SDValue(Node, 2), SDValue(CNode, 1)); CurDAG->RemoveDeadNode(Node); return; } case ISD::SETCC: { if (NVT.isVector() && tryVPTESTM(Node, SDValue(Node, 0), SDValue())) return; break; } case ISD::STORE: if (foldLoadStoreIntoMemOperand(Node)) return; break; case X86ISD::SETCC_CARRY: { // We have to do this manually because tblgen will put the eflags copy in // the wrong place if we use an extract_subreg in the pattern. MVT VT = Node->getSimpleValueType(0); // Copy flags to the EFLAGS register and glue it to next node. SDValue EFLAGS = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, X86::EFLAGS, Node->getOperand(1), SDValue()); // Create a 64-bit instruction if the result is 64-bits otherwise use the // 32-bit version. unsigned Opc = VT == MVT::i64 ? X86::SETB_C64r : X86::SETB_C32r; MVT SetVT = VT == MVT::i64 ? MVT::i64 : MVT::i32; SDValue Result = SDValue( CurDAG->getMachineNode(Opc, dl, SetVT, EFLAGS, EFLAGS.getValue(1)), 0); // For less than 32-bits we need to extract from the 32-bit node. if (VT == MVT::i8 || VT == MVT::i16) { int SubIndex = VT == MVT::i16 ? X86::sub_16bit : X86::sub_8bit; Result = CurDAG->getTargetExtractSubreg(SubIndex, dl, VT, Result); } ReplaceUses(SDValue(Node, 0), Result); CurDAG->RemoveDeadNode(Node); return; } case X86ISD::SBB: { if (isNullConstant(Node->getOperand(0)) && isNullConstant(Node->getOperand(1))) { MVT VT = Node->getSimpleValueType(0); // Create zero. SDVTList VTs = CurDAG->getVTList(MVT::i32, MVT::i32); SDValue Zero = SDValue(CurDAG->getMachineNode(X86::MOV32r0, dl, VTs, None), 0); if (VT == MVT::i64) { Zero = SDValue( CurDAG->getMachineNode( TargetOpcode::SUBREG_TO_REG, dl, MVT::i64, CurDAG->getTargetConstant(0, dl, MVT::i64), Zero, CurDAG->getTargetConstant(X86::sub_32bit, dl, MVT::i32)), 0); } // Copy flags to the EFLAGS register and glue it to next node. SDValue EFLAGS = CurDAG->getCopyToReg(CurDAG->getEntryNode(), dl, X86::EFLAGS, Node->getOperand(2), SDValue()); // Create a 64-bit instruction if the result is 64-bits otherwise use the // 32-bit version. unsigned Opc = VT == MVT::i64 ? X86::SBB64rr : X86::SBB32rr; MVT SBBVT = VT == MVT::i64 ? MVT::i64 : MVT::i32; VTs = CurDAG->getVTList(SBBVT, MVT::i32); SDValue Result = SDValue(CurDAG->getMachineNode(Opc, dl, VTs, {Zero, Zero, EFLAGS, EFLAGS.getValue(1)}), 0); // Replace the flag use. ReplaceUses(SDValue(Node, 1), Result.getValue(1)); // Replace the result use. if (!SDValue(Node, 0).use_empty()) { // For less than 32-bits we need to extract from the 32-bit node. if (VT == MVT::i8 || VT == MVT::i16) { int SubIndex = VT == MVT::i16 ? X86::sub_16bit : X86::sub_8bit; Result = CurDAG->getTargetExtractSubreg(SubIndex, dl, VT, Result); } ReplaceUses(SDValue(Node, 0), Result); } CurDAG->RemoveDeadNode(Node); return; } break; } case X86ISD::MGATHER: { auto *Mgt = cast(Node); SDValue IndexOp = Mgt->getIndex(); SDValue Mask = Mgt->getMask(); MVT IndexVT = IndexOp.getSimpleValueType(); MVT ValueVT = Node->getSimpleValueType(0); MVT MaskVT = Mask.getSimpleValueType(); // This is just to prevent crashes if the nodes are malformed somehow. We're // otherwise only doing loose type checking in here based on type what // a type constraint would say just like table based isel. if (!ValueVT.isVector() || !MaskVT.isVector()) break; unsigned NumElts = ValueVT.getVectorNumElements(); MVT ValueSVT = ValueVT.getVectorElementType(); bool IsFP = ValueSVT.isFloatingPoint(); unsigned EltSize = ValueSVT.getSizeInBits(); unsigned Opc = 0; bool AVX512Gather = MaskVT.getVectorElementType() == MVT::i1; if (AVX512Gather) { if (IndexVT == MVT::v4i32 && NumElts == 4 && EltSize == 32) Opc = IsFP ? X86::VGATHERDPSZ128rm : X86::VPGATHERDDZ128rm; else if (IndexVT == MVT::v8i32 && NumElts == 8 && EltSize == 32) Opc = IsFP ? X86::VGATHERDPSZ256rm : X86::VPGATHERDDZ256rm; else if (IndexVT == MVT::v16i32 && NumElts == 16 && EltSize == 32) Opc = IsFP ? X86::VGATHERDPSZrm : X86::VPGATHERDDZrm; else if (IndexVT == MVT::v4i32 && NumElts == 2 && EltSize == 64) Opc = IsFP ? X86::VGATHERDPDZ128rm : X86::VPGATHERDQZ128rm; else if (IndexVT == MVT::v4i32 && NumElts == 4 && EltSize == 64) Opc = IsFP ? X86::VGATHERDPDZ256rm : X86::VPGATHERDQZ256rm; else if (IndexVT == MVT::v8i32 && NumElts == 8 && EltSize == 64) Opc = IsFP ? X86::VGATHERDPDZrm : X86::VPGATHERDQZrm; else if (IndexVT == MVT::v2i64 && NumElts == 4 && EltSize == 32) Opc = IsFP ? X86::VGATHERQPSZ128rm : X86::VPGATHERQDZ128rm; else if (IndexVT == MVT::v4i64 && NumElts == 4 && EltSize == 32) Opc = IsFP ? X86::VGATHERQPSZ256rm : X86::VPGATHERQDZ256rm; else if (IndexVT == MVT::v8i64 && NumElts == 8 && EltSize == 32) Opc = IsFP ? X86::VGATHERQPSZrm : X86::VPGATHERQDZrm; else if (IndexVT == MVT::v2i64 && NumElts == 2 && EltSize == 64) Opc = IsFP ? X86::VGATHERQPDZ128rm : X86::VPGATHERQQZ128rm; else if (IndexVT == MVT::v4i64 && NumElts == 4 && EltSize == 64) Opc = IsFP ? X86::VGATHERQPDZ256rm : X86::VPGATHERQQZ256rm; else if (IndexVT == MVT::v8i64 && NumElts == 8 && EltSize == 64) Opc = IsFP ? X86::VGATHERQPDZrm : X86::VPGATHERQQZrm; } else { assert(EVT(MaskVT) == EVT(ValueVT).changeVectorElementTypeToInteger() && "Unexpected mask VT!"); if (IndexVT == MVT::v4i32 && NumElts == 4 && EltSize == 32) Opc = IsFP ? X86::VGATHERDPSrm : X86::VPGATHERDDrm; else if (IndexVT == MVT::v8i32 && NumElts == 8 && EltSize == 32) Opc = IsFP ? X86::VGATHERDPSYrm : X86::VPGATHERDDYrm; else if (IndexVT == MVT::v4i32 && NumElts == 2 && EltSize == 64) Opc = IsFP ? X86::VGATHERDPDrm : X86::VPGATHERDQrm; else if (IndexVT == MVT::v4i32 && NumElts == 4 && EltSize == 64) Opc = IsFP ? X86::VGATHERDPDYrm : X86::VPGATHERDQYrm; else if (IndexVT == MVT::v2i64 && NumElts == 4 && EltSize == 32) Opc = IsFP ? X86::VGATHERQPSrm : X86::VPGATHERQDrm; else if (IndexVT == MVT::v4i64 && NumElts == 4 && EltSize == 32) Opc = IsFP ? X86::VGATHERQPSYrm : X86::VPGATHERQDYrm; else if (IndexVT == MVT::v2i64 && NumElts == 2 && EltSize == 64) Opc = IsFP ? X86::VGATHERQPDrm : X86::VPGATHERQQrm; else if (IndexVT == MVT::v4i64 && NumElts == 4 && EltSize == 64) Opc = IsFP ? X86::VGATHERQPDYrm : X86::VPGATHERQQYrm; } if (!Opc) break; SDValue Base, Scale, Index, Disp, Segment; if (!selectVectorAddr(Mgt, Mgt->getBasePtr(), IndexOp, Mgt->getScale(), Base, Scale, Index, Disp, Segment)) break; SDValue PassThru = Mgt->getPassThru(); SDValue Chain = Mgt->getChain(); // Gather instructions have a mask output not in the ISD node. SDVTList VTs = CurDAG->getVTList(ValueVT, MaskVT, MVT::Other); MachineSDNode *NewNode; if (AVX512Gather) { SDValue Ops[] = {PassThru, Mask, Base, Scale, Index, Disp, Segment, Chain}; NewNode = CurDAG->getMachineNode(Opc, SDLoc(dl), VTs, Ops); } else { SDValue Ops[] = {PassThru, Base, Scale, Index, Disp, Segment, Mask, Chain}; NewNode = CurDAG->getMachineNode(Opc, SDLoc(dl), VTs, Ops); } CurDAG->setNodeMemRefs(NewNode, {Mgt->getMemOperand()}); ReplaceUses(SDValue(Node, 0), SDValue(NewNode, 0)); ReplaceUses(SDValue(Node, 1), SDValue(NewNode, 2)); CurDAG->RemoveDeadNode(Node); return; } case X86ISD::MSCATTER: { auto *Sc = cast(Node); SDValue Value = Sc->getValue(); SDValue IndexOp = Sc->getIndex(); MVT IndexVT = IndexOp.getSimpleValueType(); MVT ValueVT = Value.getSimpleValueType(); // This is just to prevent crashes if the nodes are malformed somehow. We're // otherwise only doing loose type checking in here based on type what // a type constraint would say just like table based isel. if (!ValueVT.isVector()) break; unsigned NumElts = ValueVT.getVectorNumElements(); MVT ValueSVT = ValueVT.getVectorElementType(); bool IsFP = ValueSVT.isFloatingPoint(); unsigned EltSize = ValueSVT.getSizeInBits(); unsigned Opc; if (IndexVT == MVT::v4i32 && NumElts == 4 && EltSize == 32) Opc = IsFP ? X86::VSCATTERDPSZ128mr : X86::VPSCATTERDDZ128mr; else if (IndexVT == MVT::v8i32 && NumElts == 8 && EltSize == 32) Opc = IsFP ? X86::VSCATTERDPSZ256mr : X86::VPSCATTERDDZ256mr; else if (IndexVT == MVT::v16i32 && NumElts == 16 && EltSize == 32) Opc = IsFP ? X86::VSCATTERDPSZmr : X86::VPSCATTERDDZmr; else if (IndexVT == MVT::v4i32 && NumElts == 2 && EltSize == 64) Opc = IsFP ? X86::VSCATTERDPDZ128mr : X86::VPSCATTERDQZ128mr; else if (IndexVT == MVT::v4i32 && NumElts == 4 && EltSize == 64) Opc = IsFP ? X86::VSCATTERDPDZ256mr : X86::VPSCATTERDQZ256mr; else if (IndexVT == MVT::v8i32 && NumElts == 8 && EltSize == 64) Opc = IsFP ? X86::VSCATTERDPDZmr : X86::VPSCATTERDQZmr; else if (IndexVT == MVT::v2i64 && NumElts == 4 && EltSize == 32) Opc = IsFP ? X86::VSCATTERQPSZ128mr : X86::VPSCATTERQDZ128mr; else if (IndexVT == MVT::v4i64 && NumElts == 4 && EltSize == 32) Opc = IsFP ? X86::VSCATTERQPSZ256mr : X86::VPSCATTERQDZ256mr; else if (IndexVT == MVT::v8i64 && NumElts == 8 && EltSize == 32) Opc = IsFP ? X86::VSCATTERQPSZmr : X86::VPSCATTERQDZmr; else if (IndexVT == MVT::v2i64 && NumElts == 2 && EltSize == 64) Opc = IsFP ? X86::VSCATTERQPDZ128mr : X86::VPSCATTERQQZ128mr; else if (IndexVT == MVT::v4i64 && NumElts == 4 && EltSize == 64) Opc = IsFP ? X86::VSCATTERQPDZ256mr : X86::VPSCATTERQQZ256mr; else if (IndexVT == MVT::v8i64 && NumElts == 8 && EltSize == 64) Opc = IsFP ? X86::VSCATTERQPDZmr : X86::VPSCATTERQQZmr; else break; SDValue Base, Scale, Index, Disp, Segment; if (!selectVectorAddr(Sc, Sc->getBasePtr(), IndexOp, Sc->getScale(), Base, Scale, Index, Disp, Segment)) break; SDValue Mask = Sc->getMask(); SDValue Chain = Sc->getChain(); // Scatter instructions have a mask output not in the ISD node. SDVTList VTs = CurDAG->getVTList(Mask.getValueType(), MVT::Other); SDValue Ops[] = {Base, Scale, Index, Disp, Segment, Mask, Value, Chain}; MachineSDNode *NewNode = CurDAG->getMachineNode(Opc, SDLoc(dl), VTs, Ops); CurDAG->setNodeMemRefs(NewNode, {Sc->getMemOperand()}); ReplaceUses(SDValue(Node, 0), SDValue(NewNode, 1)); CurDAG->RemoveDeadNode(Node); return; } case ISD::PREALLOCATED_SETUP: { auto *MFI = CurDAG->getMachineFunction().getInfo(); auto CallId = MFI->getPreallocatedIdForCallSite( cast(Node->getOperand(1))->getValue()); SDValue Chain = Node->getOperand(0); SDValue CallIdValue = CurDAG->getTargetConstant(CallId, dl, MVT::i32); MachineSDNode *New = CurDAG->getMachineNode( TargetOpcode::PREALLOCATED_SETUP, dl, MVT::Other, CallIdValue, Chain); ReplaceUses(SDValue(Node, 0), SDValue(New, 0)); // Chain CurDAG->RemoveDeadNode(Node); return; } case ISD::PREALLOCATED_ARG: { auto *MFI = CurDAG->getMachineFunction().getInfo(); auto CallId = MFI->getPreallocatedIdForCallSite( cast(Node->getOperand(1))->getValue()); SDValue Chain = Node->getOperand(0); SDValue CallIdValue = CurDAG->getTargetConstant(CallId, dl, MVT::i32); SDValue ArgIndex = Node->getOperand(2); SDValue Ops[3]; Ops[0] = CallIdValue; Ops[1] = ArgIndex; Ops[2] = Chain; MachineSDNode *New = CurDAG->getMachineNode( TargetOpcode::PREALLOCATED_ARG, dl, CurDAG->getVTList(TLI->getPointerTy(CurDAG->getDataLayout()), MVT::Other), Ops); ReplaceUses(SDValue(Node, 0), SDValue(New, 0)); // Arg pointer ReplaceUses(SDValue(Node, 1), SDValue(New, 1)); // Chain CurDAG->RemoveDeadNode(Node); return; } case X86ISD::AESENCWIDE128KL: case X86ISD::AESDECWIDE128KL: case X86ISD::AESENCWIDE256KL: case X86ISD::AESDECWIDE256KL: { if (!Subtarget->hasWIDEKL()) break; unsigned Opcode; switch (Node->getOpcode()) { default: llvm_unreachable("Unexpected opcode!"); case X86ISD::AESENCWIDE128KL: Opcode = X86::AESENCWIDE128KL; break; case X86ISD::AESDECWIDE128KL: Opcode = X86::AESDECWIDE128KL; break; case X86ISD::AESENCWIDE256KL: Opcode = X86::AESENCWIDE256KL; break; case X86ISD::AESDECWIDE256KL: Opcode = X86::AESDECWIDE256KL; break; } SDValue Chain = Node->getOperand(0); SDValue Addr = Node->getOperand(1); SDValue Base, Scale, Index, Disp, Segment; if (!selectAddr(Node, Addr, Base, Scale, Index, Disp, Segment)) break; Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM0, Node->getOperand(2), SDValue()); Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM1, Node->getOperand(3), Chain.getValue(1)); Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM2, Node->getOperand(4), Chain.getValue(1)); Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM3, Node->getOperand(5), Chain.getValue(1)); Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM4, Node->getOperand(6), Chain.getValue(1)); Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM5, Node->getOperand(7), Chain.getValue(1)); Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM6, Node->getOperand(8), Chain.getValue(1)); Chain = CurDAG->getCopyToReg(Chain, dl, X86::XMM7, Node->getOperand(9), Chain.getValue(1)); MachineSDNode *Res = CurDAG->getMachineNode( Opcode, dl, Node->getVTList(), {Base, Scale, Index, Disp, Segment, Chain, Chain.getValue(1)}); CurDAG->setNodeMemRefs(Res, cast(Node)->getMemOperand()); ReplaceNode(Node, Res); return; } } SelectCode(Node); } bool X86DAGToDAGISel:: SelectInlineAsmMemoryOperand(const SDValue &Op, unsigned ConstraintID, std::vector &OutOps) { SDValue Op0, Op1, Op2, Op3, Op4; switch (ConstraintID) { default: llvm_unreachable("Unexpected asm memory constraint"); case InlineAsm::Constraint_o: // offsetable ?? case InlineAsm::Constraint_v: // not offsetable ?? case InlineAsm::Constraint_m: // memory case InlineAsm::Constraint_X: if (!selectAddr(nullptr, Op, Op0, Op1, Op2, Op3, Op4)) return true; break; } OutOps.push_back(Op0); OutOps.push_back(Op1); OutOps.push_back(Op2); OutOps.push_back(Op3); OutOps.push_back(Op4); return false; } /// This pass converts a legalized DAG into a X86-specific DAG, /// ready for instruction scheduling. FunctionPass *llvm::createX86ISelDag(X86TargetMachine &TM, CodeGenOpt::Level OptLevel) { return new X86DAGToDAGISel(TM, OptLevel); }